So i know a little here and there about rooting so i decided to give it a go. I downloaded the root file from here...
rootmygalaxy. net/how-to-safely-root-s6-edge-plus/
And as soon as i did this i got stuck on the "kernel is not seandroid enforcing" s6 logo screen and could never get passed it.
So i flashed twrp and wiped everything and tried to install a custom rom via twrp and an otg usb flash drive...
I still get the "kernel is not seandroid enforcing" loading screen.
I then tried to odin 3 different stock files and i get a failed prompt on odin and my phone says
" Sw rev check fail device 2 binary"
I don't know where to go from here. any help would be appreciated .
Steffmc said:
So i know a little here and there about rooting so i decided to give it a go. I downloaded the root file from here...
rootmygalaxy. net/how-to-safely-root-s6-edge-plus/
And as soon as i did this i got stuck on the "kernel is not seandroid enforcing" s6 logo screen and could never get passed it.
So i flashed twrp and wiped everything and tried to install a custom rom via twrp and an otg usb flash drive...
I still get the "kernel is not seandroid enforcing" loading screen.
I then tried to odin 3 different stock files and i get a failed prompt on odin and my phone says
" Sw rev check fail device 2 binary"
I don't know where to go from here. any help would be appreciated .
Click to expand...
Click to collapse
From what I remember , you will receive that specific error if you try to install the wrong firmware. Where did you download your firmware from? What version of Android were you using before this problem started?
Have you tried to use Smart Switch to recover the device using the emergency recovery mode?
Also, do you still have TWRP installed and are you able to boot to recovery and download mode?
Sent from my Nexus 6 using XDA-Developers mobile app
Thanks for the reply. The site wont let me post the link to the site i got the firmware from.
T-Mobile S6 Edge Plus G928T and one other G928W8 variant:
Download auto-root kernel for G928 T / W8 (.tar)
^^ thats what it was. I had the lastest version before i did the root. And i tried the smart switch but ended with a fail install.
I just downloaded the modified kernel for the s6 + and installed it. the seandroid enforcing message went away and i got a normal S6+ logo screen but after that it now just goes black.
Finally got it. Had to try a 4th stock file but this one finally worked.
Steffmc said:
Finally got it. Had to try a 4th stock file but this one finally worked.
Click to expand...
Click to collapse
That's great. Glad you got it figured out and your back up and running. Great job.
Sent from my Nexus 6 using XDA-Developers mobile app
Related
Ok, So I just bought the Tmo Note 3 and was looking to root it
I went on youtube and found the Auto-root method
I downloaded the auto-root files, open Odin, put the CF-Auto root.tar.md5 in the PDA section of Odin and clicked start.
when it was done my phone rebooted into a screen with 3 lines on top saying
RECOVERY BOOTING....
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
Can anyone please help me?
Phone was on 4.3
I can also still go to Download mode but cannot boot into android or into a recovery it just boots to those 3 lines above.
Help?
The same thing happen to me when I tried installing clockwork mod recovery and twrp recovery. I had to go to the website sammobile.com and download the original firmware MD5 file (2,218,421kb) put the phone in download mode and re flash the whole thing and start over. I still can't get a custom recovery to work. Can anyone shed light on this? Thanks
Reflash the recovery.
Mine shows the same, pauses and then boots into the recovery (TWRP in my case).
dbrow said:
The same thing happen to me when I tried installing clockwork mod recovery and twrp recovery. I had to go to the website sammobile.com and download the original firmware MD5 file (2,218,421kb) put the phone in download mode and re flash the whole thing and start over. I still can't get a custom recovery to work. Can anyone shed light on this? Thanks
Click to expand...
Click to collapse
Yea thats what im doing, the download is taking forever but i thought it would work... thanks!
krelvinaz said:
Reflash the recovery.
Mine shows the same, pauses and then boots into the recovery (TWRP in my case).
Click to expand...
Click to collapse
you mean re-flash the CF-AutoRoot.tar.md5 file?
How exactly did you get it to boot into a custom recovery?
No prob! Yeah it took me about an hour.
Sent from my SM-N900P using xda app-developers app
Just had this happen to me also. I just downloaded philz recovery .tar and flashed through odin. I still cant get a custom recovery but it got me out of my bootloop and back into my system
Sent from my SM-N900T using xda app-developers app
Sammydr10 said:
Ok, So I just bought the Tmo Note 3 and was looking to root it
I went on youtube and found the Auto-root method
I downloaded the auto-root files, open Odin, put the CF-Auto root.tar.md5 in the PDA section of Odin and clicked start.
when it was done my phone rebooted into a screen with 3 lines on top saying
RECOVERY BOOTING....
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
Can anyone please help me?
Phone was on 4.3
I can also still go to Download mode but cannot boot into android or into a recovery it just boots to those 3 lines above.
Help?
Click to expand...
Click to collapse
You should have done the 4.4 update then rooted. .........
Sent from my SM-N900T using Tapatalk
bipoler said:
You should have done the 4.4 update then rooted. .........
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Thats what I did now lol
Sammydr10 said:
Thats what I did now lol
Click to expand...
Click to collapse
Lol good papi
Sent from my SM-N900T using Tapatalk
Ok so I updated to 4.4 and then flashed the CF-AutoRoot.tar.md5 file
I now have root
I downloaded Rom manager and tried installing CWM Recovery -- it installed but when i tried rebooting into recovery Im just stuck in a boot loop with the screen I had at the start of this thread which is
RECOVERY BOOTING....
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
Any help!??
Sammydr10 said:
Ok, So I just bought the Tmo Note 3 and was looking to root it
I went on youtube and found the Auto-root method
I downloaded the auto-root files, open Odin, put the CF-Auto root.tar.md5 in the PDA section of Odin and clicked start.
when it was done my phone rebooted into a screen with 3 lines on top saying
RECOVERY BOOTING....
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
Can anyone please help me?
Phone was on 4.3
I can also still go to Download mode but cannot boot into android or into a recovery it just boots to those 3 lines above.
Help?
Click to expand...
Click to collapse
That is where I was getting my issues, I downloaded the 6.19.3 .tar from http://goo.im/devs/philz_touch/CWM_Advanced_Edition/hlte and flashed through odin twice in order for it to stick.
Sammydr10 said:
Ok so I updated to 4.4 and then flashed the CF-AutoRoot.tar.md5 file
I now have root
I downloaded Rom manager and tried installing CWM Recovery -- it installed but when i tried rebooting into recovery Im just stuck in a boot loop with the screen I had at the start of this thread which is
RECOVERY BOOTING....
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
Any help!??
Click to expand...
Click to collapse
Download philz recovery and flash with ODIN. The warning about recovery is normal once you have a custom recovery installed.
This thread should help you. http://forum.xda-developers.com/showthread.php?t=2672393
prycem said:
Download philz recovery and flash with ODIN. The warning about recovery is normal once you have a custom recovery installed.
This thread should help you. http://forum.xda-developers.com/showthread.php?t=2672393
Click to expand...
Click to collapse
Thanks for putting on the right path.
Thanks to everyone who helped me out
I would highly suggest twrp 2.7. Less compatibility issues. Its more than just a personal preference thing.
Sent from my Nexus 7 using Tapatalk
prycem said:
Download philz recovery and flash with ODIN. The warning about recovery is normal once you have a custom recovery installed.
This thread should help you. http://forum.xda-developers.com/showthread.php?t=2672393
Click to expand...
Click to collapse
DUDE THANKS, YOU SAVED ME.I WAS VERY NERVOUS. U SAVED ME FROM MY DAD
#10000 repped if I can.. but really, Thanks dude I really appreciate it
No problem man. Glad that I helped.
Sent from my SM-N900T using XDA Free mobile app
prycem said:
Download philz recovery and flash with ODIN. The warning about recovery is normal once you have a custom recovery installed.
This thread should help you. http://forum.xda-developers.com/showthread.php?t=2672393
Click to expand...
Click to collapse
I flashed philz through odin and saw the warning about recovery. recovery still booted though, but i wasnt sure if i was in trouble. So its normal you say?
Yes. That message is normal for any non stock recovery.
Sent from my SM-N900T using XDA Free mobile app
Today a miracle occurred.
I have a n900-p Sprint that was rooted months ago and today I stupidly was messing with ROM manager and hit "reboot into recovery"
My phone went in to a boot loop with this "recovery is not seandroid enforcing" message right before bed time and I was in boot loop hell.
Some quick googling brought me here and gratefully I used some of your info to save myself on first try.
Step-by-step for any Googlers passing through:
1. Download Odin and your stock android rom (by pure dumb luck I remembered the last three letters from when I was screwing around on the settings screen earlier in the day.
2. Run As Administrator Odin and put your phone in download mode (pull battery, wait ten seconds, hold down VOL down + Power + front key)
3. Plug in your busted phone
4. Hit AP button in Odin and find your stock android rom you d/l earlier
5. after you get a blue box under ID:COM in Odin, hit start
6. pray
7. boom, when its done everything is back to normal.
If a monkey as dumb as me can pull it off, so can you. Good luck internet strangers.
HI guys and thanks in advance for your help and insight. I'm having problems upgrading to 4.4 Kit-Kat. I'm currently rooted and flashed running Darthstalker Rom Version 6. After putting my phone in download mode and opening Odin running CF Auto Root for the SM-900T which went semi fine I think. When flashing CF Auto Root the first box in Odin never said Pass it got stuck in Reset which is a little weird to me that's never happened before but I restarted the phone back in download mode and let the phone continue to reboot normally then the Reset in Odin changed to Pass.. I know Weird. So then I said ok Let me Flash the Latest TWRP. Hurray!!! worked like a charm the phone reboot and everything I thought I was home free but not so fast....lol Once I powered the phone back down and put it in Recovery Mode..... I get this message in the top left
Recovery Booting.....(Blue)
Recovery is not Seandroid Enforcing (Red)
Set Warrenty Bit (Yellow)
It gets stuck there along with the Samsung Galaxy note 3 logo but nothing else....
Can anybody please help me please....Thanks a bunch. If you guys in the Houston area and you help me get this mystery solved the 6 pack of your choice is on me. Ill personally bring it too you..Thanks
Anybody have any ideas???
You waited a whole hour and 11 minutes......
chickmagnet_25 said:
HI guys and thanks in advance for your help and insight. I'm having problems upgrading to 4.4 Kit-Kat. I'm currently rooted and flashed running Darthstalker Rom Version 6. After putting my phone in download mode and opening Odin running CF Auto Root for the SM-900T which went semi fine I think. When flashing CF Auto Root the first box in Odin never said Pass it got stuck in Reset which is a little weird to me that's never happened before but I restarted the phone back in download mode and let the phone continue to reboot normally then the Reset in Odin changed to Pass.. I know Weird. So then I said ok Let me Flash the Latest TWRP. Hurray!!! worked like a charm the phone reboot and everything I thought I was home free but not so fast....lol Once I powered the phone back down and put it in Recovery Mode..... I get this message in the top left
Recovery Booting.....(Blue)
Recovery is not Seandroid Enforcing (Red)
Set Warrenty Bit (Yellow)
It gets stuck there along with the Samsung Galaxy note 3 logo but nothing else....
Can anybody please help me please....Thanks a bunch. If you guys in the Houston area and you help me get this mystery solved the 6 pack of your choice is on me. Ill personally bring it too you..Thanks
Click to expand...
Click to collapse
To upgrade to KitKat you have to flash via Odin the stock KitKat firmware first, then you can root your phone, then flash the recovery you want. After that you can flash any custom rom that is KitKat based, be sure that the rom you are flashing got the kernel included, one time my phone got stuck on reboot, and was because the rom didn't included the kernel. Hope this can help you.
Sent from my SM-N900T using XDA Premium 4 mobile app
Flash a different kernel...
parusia said:
To upgrade to KitKat you have to flash via Odin the stock KitKat firmware first, then you can root your phone, then flash the recovery you want. After that you can flash any custom rom that is KitKat based, be sure that the rom you are flashing got the kernel included, one time my phone got stuck on reboot, and was because the rom didn't included the kernel. Hope this can help you.
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
AT & T Galaxy Note 2 SGH-13I7
So I'm at a loss on what to do with my phone at this point..
Everything was running great until yesterday, I attempted to root it, the root attempt was unsuccesful but the phone still worked just fine and It even got shut off and turned on a few times after the failed attempt. But one time it froze up after installing an app and after that the phone got stuck on the boot screen.
So this morning I flashed the stock 4.1.2 Rom and it worked again, then I updated the phone on the device itself. OTA is what you would call it I believe. And now I'm back to where I started. The phone gets stuck on the galaxy note 2 loading screen and it wont start.
I cannot enter recovery mode in order to wipe the settings and clear the cache.
I can enter download mode however, and my attempts at flashing the stock firmware PASS on Odin but the phone only gets stuck on the loading screen again afterwards
Does anyone know what I should do?
Your help is greatly appreciated. Thanks a bunch
Is there any way I might be able to enter a recovery mode using an micro SD card?
To which rom you updated? Know that from newest version there is no going back.
Sent from my GT-N7100
note2nooby said:
To which rom you updated? Know that from newest version there is no going back.
Edit : there's a way(maybe) to get to download mode. But not sure if it will work on your phone. There is a thing called jig kick USB. You can build one yourself.
Sent from my GT-N7100
Click to expand...
Click to collapse
Thats probably my problem then. I was running 4.3 and the stock firmware I installed was 4.1.
Is jig kick USB used to get into download mode, if thats the case then I am already able to do that. Just not get into recovery mode.
Yes I noticed later that you can access download mode. So try to flash the rom you updated to but for your carier as your phone is from at&t you should use their rom. I don't have carrier phone so I speak theoretically. But I guess you understand what I mean.
Sent from my GT-N7100
note2nooby said:
Yes I noticed later that you can access download mode. So try to flash the rom you updated to but for your carier as your phone is from at&t you should use their rom. I don't have carrier phone so I speak theoretically. But I guess you understand what I mean.
Sent from my GT-N7100
Click to expand...
Click to collapse
I just got the AT & T ROM from sammobile and flashed it with Odin, it says it passes, but once the phone reboots it just gets stuck on the loading screen again
Thanks for your help by the way
BicyclingSloth said:
I just got the AT & T ROM from sammobile and flashed it with Odin, it says it passes, but once the phone reboots it just gets stuck on the loading screen again
Thanks for your help by the way
Click to expand...
Click to collapse
newest at&t rom is mk6 you will find it in the at&t Dev section an odin one pre rooted is available.
Sent from my GT-N7105 using Tapatalk
cnote74 said:
newest at&t rom is mk6 you will find it in the at&t Dev section an odin one pre rooted is available.
Sent from my GT-N7105 using Tapatalk
Click to expand...
Click to collapse
mine is the same n7105, so how did this go, did it worked?
mine n7105 says passed and once rebooted don't pass n7105 logo, i can only enter download mode,
I'm having the exact same issue, 7100 Sprint. Odin flashes pass but still stuck on SGNII screen, can't flash recovery or ROM. Had 4.1.2 and accepted OTA mistakenly.
I literally just had this problem with my SGH-I317 and fixed it with this:
http://forum.xda-developers.com/showthread.php?t=2589891 go down to where it says "If you are running the official *MK6* firmware"
ive had something similar. had odin pass. no cwm / twrp access only stock recovery and stock downloader mode.
you need to flash a stock rom to get it back, then boot into it. connect pc. (a different usb port sometimes) get ODIN to reboot it into downloader mode. I had major problems getting to that point. but got it from flashing a stock rom. I have also had this old CM10 rom that fix's all partitions etc. i cant remember the name of it now.
a couple of times ive had issues getting into custom recovery. when you hold power +vol up + home key. when u do keep holding power. it loops boot and loops back again. when u release. make sure you hold power for like 1-2 seconds on logo. dont release power button before logo appears. wait a second after it appears. get it every time now.
Try to flash latest TWRP trough ODIN and check if you can boot in to recovery after that.
So I try flashing a custom recovery but now im stuck in the Samsung Galaxy s6 Power By Android screen with this message on the top left corner "Recovery Is Not "Seandroid Enforcing "
i heard you can flash the stock firmware but i updated my s6 to 5.1.1 just before this happened and i can't seem to find 5.1.1 for my SM-G920P anywhere can i get some help?
The custom recovery you flashed isn't compatible with 5.1.1. Flash this test build of TWRP (link) with Odin and you should be up and running. Just be careful, it will ask you to modify your system partition to make it read/write, don't do that unless you have flashed datajosh's permissive kernel or you'll get bootloops.
delete
prototype7 thank you so much bruh!! I thought I had to wait till the 5.1.1 release but this fixed my phone instantly!! Now I got a message saying kernel is not seandroid enforcing but it doesn't mess with an boot functions. I applied iDone unlock method and it works perfect on 5.1.1
stephfd21 said:
prototype7 thank you so much bruh!! I thought I had to wait till the 5.1.1 release but this fixed my phone instantly!! Now I got a message saying kernel is not seandroid enforcing but it doesn't mess with an boot functions. I applied iDone unlock method and it works perfect on 5.1.1
Click to expand...
Click to collapse
Yeah, you'll get that message as long as your recovery/kernel isn't totally stock and signed by Samsung. As long as it boots it's all good.
Sent from my SM-G920P using Tapatalk
i need help samsung s6 sprint ,recovery is not seandroid enforcing
prototype7 said:
Yeah, you'll get that message as long as your recovery/kernel isn't totally stock and signed by Samsung. As long as it boots it's all good.
Sent from my SM-G920P using Tapatalk
Click to expand...
Click to collapse
the format link is IMG NOT MD5, NOT FUCTIONAL ODIN, PLEASE HELP MY EMAIL IS EDWARDHERNANDEZ15 @gmail.com
Bro will please tell me how i can done with odin ,
if u please show me step by step procecc
"KerneI Not Seandroid Enforcing " Now my touch screen won't even work~not even in twrp.
Restoring To Factory
For most of the people here the best thing that you can do is to Odin back to the way the phone was when you first got it. No root, no TWRP. If you want to try again from there, please be sure to use the correct files for your phone.
Step 1) Download the factory image from http://www.sammobile.com/firmwares/download/50545/G920PVPU2BOF7_G920PSPT2BOF7_SPR/
Step 2) Download Odin from http://www.samsungodindownload.com/download/#.VfSc3nBVhBc
Step 3) Follow the guide here http://forums.androidcentral.com/am...w-flash-stock-rom-via-odin-new-interface.html
koop1955 said:
For most of the people here the best thing that you can do is to Odin back to the way the phone was when you first got it. No root, no TWRP. If you want to try again from there, please be sure to use the correct files for your phone.
Step 1) Download the factory image from http://www.sammobile.com/firmwares/download/50545/G920PVPU2BOF7_G920PSPT2BOF7_SPR/
Step 2) Download Odin from http://www.samsungodindownload.com/download/#.VfSc3nBVhBc
Step 3) Follow the guide here http://forums.androidcentral.com/am...w-flash-stock-rom-via-odin-new-interface.html
Click to expand...
Click to collapse
ive tried this and it just gets stuck on NAND write start....
I really hate this phone :|
Hi guys, i am having issue.
I have s6 edge g295i
I have 5.1.1 rooted stock using CF-Auto-Root-zerolte-zeroltedv-smg925i.tar through odin
I then installed TWRP succesfully via twrp_S6edge-LATEST.tar on odin, wiped all partitions, installed the zip for v10 and it just boot loops, ive tried many times.
I even tried updating the modem/baseband to the same version i already have (g925idvu3doj6) through odin but no luck.
I tried restoring to stock using samsung tool which worked, i re-rooted same way, installed twrp through odin, then booted recovery installed zip and its looping again.
Any ideas?
So I just got my s6 today, and naturally, immediately tried to root and install TWRP, all was fine, until I updated.
Long story short, I installed the wrong TWRP, and now I'm in a bootloop, nothing will install through ODIN, and there's red text above the s6 logo saying "RECOVERY IS NOT SEANDROID ENFORCING Custom Binary blocked by FAP Lock"
I have no idea whatsoever what to do, what do I do?
What do you mean by nothing will install through odin though? Can you get into download mode?
http://www.sammobile.com/firmwares/download/50545/G920PVPU2BOF7_G920PSPT2BOF7_SPR/
Sent from my SM-G920P using XDA Free mobile app
yousefak said:
What do you mean by nothing will install through odin though? Can you get into download mode?
Click to expand...
Click to collapse
It will get into download mode, but everything I try to install via odin fails
I had that
aaronfrickinaustin said:
It will get into download mode, but everything I try to install via odin fails
Click to expand...
Click to collapse
I had the same problem, but had insurance and received a new device yesterday. I got it up and running with a file djvoleur sent me. It fixed it but when I rebooted I received the red letters on the upper right hand side telling me that the device was locked. Samsung has put a program inside that causes that when u try to put a "competitors" Kernel by mistake. Since the Kernel is not a Sprint kernel (it was my mistake) it locks up.
Try this, but don't boot and if it works, make sure that you contact djvoleur and thank him.
https://drive.google.com/file/d/0B0_GZK11foVmSEVXYmUwZGZDNHc/edit?pli=1
I would then try to see what your next steps would be.
I was also stuck in a bootloop after flashing the wrong recovery. Try flashing TWRP 2.8.7.1 zerofltespr.img.tar
I'd link to it but XDA won't let me for some reason, a Google search should find it. Make sure it's zerofltespr and not zeroflte
The 5.1.1 tar is available now. Install that and you should be good to go.
Sent from my iPad using Tapatalk HD
Same issue here. So if I download the Sprint 5.1.1 firmware and install it through Odin, this would fix the issue?
Thanks!
Skybone29 said:
I was also stuck in a bootloop after flashing the wrong recovery. Try flashing TWRP 2.8.7.1 zerofltespr.img.tar
I'd link to it but XDA won't let me for some reason, a Google search should find it. Make sure it's zerofltespr and not zeroflte
Click to expand...
Click to collapse
I just tried to install this version of twrp and now the touch wont respond so now I cant get out of recovery
Rocklee99 said:
I just tried to install this version of twrp and now the touch wont respond so now I cant get out of recovery
Click to expand...
Click to collapse
That's weird, it did that to me at first too but after a few reboots it just went away for me...sorry, wish I could help more