Develop Bugs

Is someone planning a KitKat ROM for Desire Z?

Hello,
Im wondering if any active developers are left that will be working on a KitKat ROM for the Desire Z. Not looking for a ETA or anything, just asking if someone is interested.

Android 4.3 isn't even ready for public testing so perhaps we have to wait for KitKat a long time.
Anyway - is it true that Android 4.4 provides better support for older devices?

TheReduxPL said:
Android 4.3 isn't even ready for public testing so perhaps we have to wait for KitKat a long time.
Anyway - is it true that Android 4.4 provides better support for older devices?
Click to expand...
Click to collapse
Support no. It just says APIs for low end RAM devices such as smartwatches and smartwear in general.

Would love this
Im hoping/waiting for this too. I feel like the Desire Z or G2 as it was called in the UK is still the best designed phone out there with a real keyboard and a lot of people like myself are still using it for this reason. When i heard about KitKat providing for low end devices, a light bulb went off for me. Still no word yet tho

finger cross
riahc3 said:
Hello,
Im wondering if any active developers are left that will be working on a KitKat ROM for the Desire Z. Not looking for a ETA or anything, just asking if someone is interested.
Click to expand...
Click to collapse
i really hope there is some developer with htc desire Z and working on porting kitkat 4.4 . i would love to try it

For those still curious. http://forum.xda-developers.com/showthread.php?t=2527197
CM10.2 and 11 progress. CM10.2 isn't that bad to use, there's still some quirks here and there. The kitkat rom is nowhere near stable for a daily driver, I wouldn't even recommend using it for more than like a few hours just to mess around on, but it's at least been somewhat ported showing promise.

after posting my above comment i went to android development section and guess what i found .....
http://forum.xda-developers.com/showthread.php?t=2527197
am planning to flash it tomorrow
finger cross
hope all goes well
)
---------- Post added at 06:05 PM ---------- Previous post was at 06:00 PM ----------
fireball0093 said:
For those still curious. http://forum.xda-developers.com/showthread.php?t=2527197
CM10.2 and 11 progress. CM10.2 isn't that bad to use, there's still some quirks here and there. The kitkat rom is nowhere near stable for a daily driver, I wouldn't even recommend using it for more than like a few hours just to mess around on, but it's at least been somewhat ported showing promise.
Click to expand...
Click to collapse
thanks for the info. i found out later as well
BTW have you tried both rom ? which is more stable and what are your opinions ? would you like to share info please ?
hoping to flash it after i read your review. BTW wat is ur current rom ?

S03iT said:
after posting my above comment i went to android development section and guess what i found .....
http://forum.xda-developers.com/showthread.php?t=2527197
am planning to flash it tomorrow
finger cross
hope all goes well
)
---------- Post added at 06:05 PM ---------- Previous post was at 06:00 PM ----------
thanks for the info. i found out later as well
BTW have you tried both rom ? which is more stable and what are your opinions ? would you like to share info please ?
hoping to flash it after i read your review. BTW wat is ur current rom ?
Click to expand...
Click to collapse
Honestly I'd recommend for a daily driver sticking with cm10.1 for the time being if you want a stock android experience, there's still things that need to be worked out for both of the roms

fireball0093 said:
Honestly I'd recommend for a daily driver sticking with cm10.1 for the time being if you want a stock android experience, there's still things that need to be worked out for both of the roms
Click to expand...
Click to collapse
hello again
just reporting my flash of CM 11.0 and CM 10.2
BTW i managed to get CWM recovery v6.0.4.5 (yuppy!! think it supports kitkat)
after flashing new recovery i tried CM 11.0 for android kit-kat but i got stucked with boot-loop.
so i moved to CM 10.2 which was successful. i got PA gApps 4.3.1
it is kinda slow but i find it stable at the moment
am playing around and looking into settings
hope its fine to use for daily use as it is my secondary fone so its ok ))

I'm using cm 11 and its great speaker phone is busted and a feww gtlches there
Sent from my Desire Z using xda app-developers app

finally kitkat
i have successfully managed to boot and run kitkat 4.4 in htc Desire Z
everything seems ok apart from gmail n browser which i get black screen.
here is the picture. hope u enjoy :victory:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Try CyanKat...its best kitkat rom ever..

Alex Mitter said:
Try CyanKat...its best kitkat rom ever..
Click to expand...
Click to collapse
thanks for the heads up, i will try it soon

Alex Mitter said:
Try CyanKat...its best kitkat rom ever..
Click to expand...
Click to collapse
I upgraded from (I think) Flinny's CM 10.1 to CyanKat, and it works well on first boot, but any subsequent reboots either bootloop or freeze at the loading animation (and the screen slowly fades...?). I'm going to try it again once there's another release.

Hopefully KitKat will run smoothly once they sort out the major bugs.

based on how the nexus s overreact on android 4.3.x i dont think the g2 is stable past 4.0 ics based on battery and how smooth it was. htc g2 downfall began at 4.1 os and continue when it come fully smooth os.

[ROM][UNIFIED] MicroKat v1.2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*Microkat is KitKat the way i like it, which is optimized yet clean.
*To get single sim devices working open up /system/build.prop and uncomment all after the "XT1063 & XT1064 Support:" line
*Thanks to: google, motorola, xda, me, shawn, chainfire, hoholee, zeppelinrox, pyroblade, slukk, janito24
MicroKat v1.2
XDA:DevDB Information
MicroKat, ROM for the Moto G 2014
Contributors
Pizza_Dox, Pizza_Dox
Source Code: https://github.com/Pizza-Dox/
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: Stock
Version Information
Status: Stable
Current Stable Version: v1.2
Stable Release Date: 2015-04-12
Created 2015-01-17
Last Updated 2015-04-12

mine

-------------------------

axl409 said:
Nice! Does it include your patch to solve ram issue?
Click to expand...
Click to collapse
no, im going to put that in a bit later and i will fine tune those values, i just want a super stable rom as my dd so im baking it and its uploading now

done, sorry for long upload.
dl link in op

anyone tried?

Downloading... :laugh:

Real Smooth Rom Buddy !
Your Rom Is Way Smooth And Fast Than Lollipop Builds.
It's Still Long Way For Lollipop To Be In Track With Kitkat For This Device.

MATHReX said:
Real Smooth Rom Buddy !
Your Rom Is Way Smooth And Fast Than Lollipop Builds.
It's Still Long Way For Lollipop To Be In Track With Kitkat For This Device.
Click to expand...
Click to collapse
Yup thats why im solid on using this instead of Lollipop, even with Xposed & GB its slick as butter
Once CM12 is stable i can optimize that aswell and make it as smooth as kk, you will see a difference...

Hi,
As I see this rom is based on stock 21.85.14, basically with those tweaks:
- Rooted and busybox
- Debloated
- Pinkman Kernel
- Adrenaline boost
Am I right?

meadillas11 said:
Hi,
As I see this rom is based on stock 21.85.14, basically with those tweaks:
- Rooted and busybox
- Debloated
- Pinkman Kernel
- Adrenaline boost
Am I right?
Click to expand...
Click to collapse
Your 10% right, i spent almost 3 weeks optimizing every single apk, go and look at a stock roms /system/app folder and compare to this roms /system/app, compare apk sizes and stuff inside, you will see a difference, and if that dosnt prove it, use stock 21.85.14 with everything wiped, then use this ROM even without Pinkman kernel and without it being debloated, you will notice a performance improvement,
how does it twerk?
moto g (2014) has low end flash storage, not so good r/w speeds, so i/o gets congested and things usually get queued, thats when you notice hangs when opening an app, my optimizations reduce app size and compress's everything in return for the cpu having to do more uncompression work, however our cpu is quad core, so there enough threads to handle the decompression, so this works quite well especially on our device since it has a decent cpu but bad flash storage,

Pizza_Dox said:
Your 10% right, i spent almost 3 weeks optimizing every single apk, go and look at a stock roms /system/app folder and compare to this roms /system/app, compare apk sizes and stuff inside, you will see a difference, and if that dosnt prove it, use stock 21.85.14 with everything wiped, then use this ROM even without Pinkman kernel and without it being debloated, you will notice a performance improvement,
how does it twerk?
moto g (2014) has low end flash storage, not so good r/w speeds, so i/o gets congested and things usually get queued, thats when you notice hangs when opening an app, my optimizations reduce app size and compress's everything in return for the cpu having to do more uncompression work, however our cpu is quad core, so there enough threads to handle the decompression, so this works quite well especially on our device since it has a decent cpu but bad flash storage,
Click to expand...
Click to collapse
Sorry if I sounded like ungrateful jerk, it was not my intention, I was asking that because I am using the 21.85.14 build debloated by myself, with a little tweak on lowmemorykiller.c and furnace kernel, so I wanted to know if it was something else.
Now I know it is more polished than mine, I'll try it asap.
Thanks and sorry if I sound rude.

meadillas11 said:
Sorry if I sounded like ungrateful jerk, it was not my intention, I was asking that because I am using the 21.85.14 build debloated by myself, with a little tweak on lowmemorykiller.c and furnace kernel, so I wanted to know if it was something else.
Now I know it is more polished than mine, I'll try it asap.
Thanks and sorry if I sound rude.
Click to expand...
Click to collapse
haha dont worry bro, , im open minded usually, i was just drawing up a graph anyway, i like predicted i would get criticism cause at first sight it does look simple but its pretty complex, i hope it works good on your device and ive attached a graph for future-readers to see so i dont have to explain (i cracked out my super art skills for this lol)
*this is theory, not sure if android works this way, but this is the most plausible thing i know about it*

will you be supporting the 1064 cause this looks to be a fabulous ROM?

Thanks for your hard work. I'm running your rom now and testing. So far it's really really fast and smooth. Thanks a lot.

xt1069 support please?

Are you planning on fixing the ram management bug in your next build?

pranshubatra707 said:
Are you planning on fixing the ram management bug in your next build?
Click to expand...
Click to collapse
read the first page

jrny99 said:
will you be supporting the 1064 cause this looks to be a fabulous ROM?
Click to expand...
Click to collapse
Well um thing is the optimizations are alot of hard work xD i can work on xt1063 & xt1064 but it would take along time + i would prefer if someone could come up with a flashable mod (which removes xt1068 stuff and replaces with xt1063 stuff and then i can optimize that)
patvdzwan said:
Thanks for your hard work. I'm running your rom now and testing. So far it's really really fast and smooth. Thanks a lot.
Click to expand...
Click to collapse
Welcome
sky0165 said:
xt1069 support please?
Click to expand...
Click to collapse
isnt like xt1068 and xt1069 similar? maybe you could try it but make a twrp backup of your current setup, if it works please tell us!
pranshubatra707 said:
Are you planning on fixing the ram management bug in your next build?
Click to expand...
Click to collapse
maybe yes, i will in a future build, v1.0 is a fully stable build essentially i will remove moto migrate and then fix the ram, but afaik from using it, the ram seems to be fine, im browsing on xda fine with 4-5 tabs and listening to tunein radio so it seems alright (btw chrome is amazing with the compression optimizations)

pranshubatra707 said:
Are you planning on fixing the ram management bug in your next build?
Click to expand...
Click to collapse
The ramscript i used was Juwe11's.
Flash the attached zip - should fix the ram management, if its not working so well, go to /system/etc/init.d and delete 97ramscript
pls report back on findings...

[ROM][ALL QUARK][5.X.X]FlymeOS 5.1.x.xxR

She's very good, I'm using a few days and actually the most fluid I've used on my device.
It is based on Cyanogen so it's compatible with Android Kernel BHB L
Flyme OS ROM
Download the rom the link below
https://mega.nz/#!Z5RTUAQJ!u3jw3Uadja0yBdztPrO0zBW_mnxrn31dCadkAfUgino
download GAPPS in opengapps.org VERSION 5.1.1
Download the BHB Kernel L:
https://www.androidfilehost.com/?fid=24531035584725051
( Optional ) (Recommended)
Download BHB Aduitor MOD:
https://www.androidfilehost.com/?w=files&flid=48767
( Optional ) (Recommended)
After downloading the files do the following process.
Do FlymeOS the zip flash only it will take a while and reset the unit, wait 30 seconds it will not start will hang on screen FlymeOS.
Hold volume - and power button until the device restarts, oh yes it will begin to optimize applications.
Set it to go to the Home screen, unplug it and plug in recovery (TWRP).
Make flash Do GAPPS BHB + L + Kernel BHB Aduitor MOD and then reboot and the device will optimize applications.
Ready-ROM is ready to be used, in Chinese applications you can erase with titanium backup.
If you do not like the home screen use the new launcher.
If you have any questions post that answer quickly.
Please do not delete the topic, the room is very good.
I think she deserves a little attention.
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry my English'm not very good.
Status: Stable
Update: 09/08/2017

Is this version of Flyme different from this other one for Quark that got shut down immediately by mods due to Chinese malware? You also posted that one.
http://forum.xda-developers.com/moto-maxx/development/rom-flymeos-4-5-4-5r-t3298039
I'm not making any accusations, I am merely asking a question. You're sure this is OK?

ChazzMatt said:
Is this version of Flyme different from this other one for Quark that got shut down immediately by mods due to Chinese malware? You also posted that one.
http://forum.xda-developers.com/moto-maxx/development/rom-flymeos-4-5-4-5r-t3298039
Click to expand...
Click to collapse
It has malware that I posted, I'm using with some users and so far only praise.
So I'm using it right now.

hpbrasil said:
It has malware that I posted, I'm using with some users and so far only praise.
So I'm using it right now.
Click to expand...
Click to collapse
You posted both versions here in this forum (one current, and one closed down) -- so let's differentiate between the two. I understand English is not your first language (my wife is Brazilian), and I understand some syntax/wording can lead to confusion. But your statement above can have two meanings. So, let's try again.
This version right now -- in this thread -- has malware? or does not?

ChazzMatt said:
You posted both, so let's differentiate between the two.
This one right now in this thread has malware? or does not?
Click to expand...
Click to collapse
This segment is not malware, right?
Previously I posted directly from Flyme server only it was closed because of it.
Then an acquaintance in XT1225 community removed the malware and uploaded it to use it there.

hpbrasil said:
This segment is not malware, right?
Previously I posted directly from Flyme server only it was closed because of it.
Then an acquaintance in XT1225 community removed the malware and uploaded it to use it there.
Click to expand...
Click to collapse
Thank you. That's the clarification I was looking for. :good:

nice rom man

pedretti said:
nice rom man
Click to expand...
Click to collapse
Yeah

Yes rom is very stable even wifi signals are very storng as compare to cm 13 rom i loved it a i use the rom about a month
the only problem so i go back to the cm 13 is aftar a month when i restart the phone it got stuck boot img and a min its got restart and again boot loop i fix the problem while wipe the cache but after again restart its get into bootloop so if u restart the phone it will get stuck in boot loop i reinstall the rom its worked fine for some time again problem is start..
Sorry for bad english

Lonely khan said:
Yes rom is very stable even wifi signals are very storng as compare to cm 13 rom i loved it a i use the rom about a month
the only problem so i go back to the cm 13 is aftar a month when i restart the phone it got stuck boot img and a min its got restart and again boot loop i fix the problem while wipe the cache but after again restart its get into bootloop so if u restart the phone it will get stuck in boot loop i reinstall the rom its worked fine for some time again problem is start..
Sorry for bad english
Click to expand...
Click to collapse
I do not have this problem, I'm using it since launch and ta quiet

ChazzMatt said:
Is this version of Flyme different from this other one for Quark that got shut down immediately by mods due to Chinese malware? You also posted that one.
http://forum.xda-developers.com/moto-maxx/development/rom-flymeos-4-5-4-5r-t3298039
I'm not making any accusations, I am merely asking a question. You're sure this is OK?
Click to expand...
Click to collapse
its differnet as well this one is flyme 5 other he posted before was flyme 4 this one is stable but on bug if u use themes nd install lots of apps nd restart the rom it will get stuck into bootloop
---------- Post added at 10:45 AM ---------- Previous post was at 10:40 AM ----------
hpbrasil said:
I do not have this problem, I'm using it since launch and ta quiet
Click to expand...
Click to collapse
are you using different themes as well ??

hpbrasil said:
I do not have this problem, I'm using it since launch and ta quiet
Click to expand...
Click to collapse
The issues Meizu shop did not accept, does not know for what reason, already researched to know and also do not get results .... I'm thinking that only accept the official system devices will search a little more.

Can you add some more features and screenshot. I want to know what i am flashing before i flash. Also mention the major bugs

you gotta give it to Meizu, Flyme is a real eye candy but it have its downs, i've been using it for a couple of days already and i can see its elegance and eye candy, the bad thing about it is that it tries hard to emulate the iPhone in some aspects, in some other areas excels but it tries to hard to be an iOS replacement that it feels like a copycat of iOS. i will be posting a more in depth review about this room soon.

Isso This ROM discontinued?

Jonanthan Nascimento said:
Isso This ROM discontinued?
Click to expand...
Click to collapse
Waiting version 6

Closed by request
Thread re-opened - OP request

Flyme ROM Update V5.1.10.24R
https://mega.nz/#!AgoFCJCC!vTpu_JlUZdqqq1LagPdGf2XrztoYvFHxjKAP57FKSb4
Corrections:
Battery improvements
Launcher improvements
BT correction (drainage)
Boot Enhancements
ROM Kernel Stock enhancements
Fixed on some devices that were rebooted.
Update blobs (The latest 5.x.x posts are added)
Improvements in Wifi Signal and STK consumption
This is the last update for this rom.
Rom is based on CM12.1 (5.1.1 Modified)

hpbrasil said:
Flyme ROM Update V5.1.10.24R
https://mega.nz/#!AgoFCJCC!vTpu_JlUZdqqq1LagPdGf2XrztoYvFHxjKAP57FKSb4
Corrections:
Battery improvements
Launcher improvements
BT correction (drainage)
Boot Enhancements
ROM Kernel Stock enhancements
Fixed on some devices that were rebooted.
Update blobs (The latest 5.x.x posts are added)
Improvements in Wifi Signal and STK consumption
This is the last update for this rom.
Rom is based on CM12.1 (5.1.1 Modified)
Click to expand...
Click to collapse
Nice to see that ROM get an update again. Thanks for your work @hpbrasil

Thanks a lothpbrasil. I´ll try it later... Looks great!

help choosing rom for kindle fire

ok basically im wanting to make my kindle fire 1 more gaming oriented. So , I want the OS version to be minimal and fast but still new enough to be compatible with most things, and I want to be able to overclock as high as possible (i made a cooling system for it )
Also I've never done any modifying with android, so I dont know for sure what all the pieces are that i need to have and what auxillary functions they perform (as in: bootloader (loads kernel?), kernel (overclocking?), ROM (kernel included?), something else?) I am a Linux user tho, so it would be helpful if I didn't have to use Windows to flash or whatever
Suggestions?

moofus120 said:
ok basically im wanting to make my kindle fire 1 more gaming oriented. So , I want the OS version to be minimal and fast but still new enough to be compatible with most things, and I want to be able to overclock as high as possible (i made a cooling system for it
Also I've never done any modifying with android, so I dont know for sure what all the pieces are that i need to have and what auxillary functions they perform (as in: bootloader (loads kernel?), kernel (overclocking?), ROM (kernel included?), something else?) I am a Linux user tho, so it would be helpful if I didn't have to use Windows to flash or whatever
Suggestions?
Click to expand...
Click to collapse
What system version is on it now?
Sent from my sailfish using XDA Labs

sd_shadow said:
What system version is on it now?
Click to expand...
Click to collapse
I just have the stock kindle os, i haven't modified the software yet.

moofus120 said:
I just have the stock kindle os, i haven't modified the software yet.
Click to expand...
Click to collapse
Which version of stock?
Sent from my Pixel using Tapatalk
---------- Post added at 05:48 PM ---------- Previous post was at 05:47 PM ----------
6.1.2, 10.4.5....?
Sent from my sailfish using XDA Labs

sd_shadow said:
Which version of stock?
Click to expand...
Click to collapse
idk for sure. does it matter tho? cuz im just gonna wipe it i thought

moofus120 said:
idk for sure. does it matter tho? cuz im just gonna wipe it i thought
Click to expand...
Click to collapse
It matters
Sent from my Pixel using Tapatalk

sd_shadow said:
It matters
Click to expand...
Click to collapse
well i think its the 6.1.2, so lets just assume that until i find out for sure. that ok?

sd_shadow said:
It matters
Click to expand...
Click to collapse
alright, i got home and checked and the software is version 6.3.4.

moofus120 said:
alright, i got home and checked and the software is version 6.3.4.
Click to expand...
Click to collapse
alright you need to root, install twrp and firefirefire
start with
[How To][Root] Kindle Fire 1 update 6.3.3/6.3.4 [2015]
then pick a rom, see the index
[INDEX] Kindle Fire Development
most roms haven't see any updates in years, many roms do not even have working download links
there are 3 different types of roms Otter, Blaze, and OtterX
Otter and Blaze use stock partitions, OtterX use modified partitions/recovery/Bootloader
also see Random Builds and Development (OtterX roms)
Sent from my XT1254 using XDA Labs

is there a utility or something in the rom to overclock it then?
And what type of rom or partitioning would you recommend?

moofus120 said:
is there a utility or something in the rom to overclock it then?
And what type of rom or partitioning would you recommend?
Click to expand...
Click to collapse
Don't think anyone found a reliable way to over clock
I don't recommend any particular ROM, read the threads, ask questions in the specific ROM thread

im currently testing out a few different roms. im looking for best performance, i'll update a little later tonight with my results.

ok, ive looked around and i think i want an otterx kitkat rom, but there are a couple and i don't know what the differences are (SGT7, slim...). Like I said, I want something fast and stable, as I am not too familiar with tablets yet. Also i thought overclocking to 1.2 ghz was pretty stable, from what i've heard?

so after trying lots of different roms, including otterx roms with the extra partitioning, i have to say i am most impressed with the performance and speed of twa_priv's CM/SGT7 10.2 Otter (not otterx) build. it is very fast, smooth and runs apps very well. I definitely recommend giving it a try. It even has the Overclocking features you wanted baked straight into the settings under the "performance" tab, you can easily adjust the minimum and maximum clock speed. Right now i have mine set at 1200mhz max and 300mhz min, i am getting very very smooth performance in Youtube and Kodi (my main use for this tablet) and battery life seems to be really good so far. I definitely rate this ROM an 8/10 for the kindle fire 1st gen, its the best rom i have used, even compared to the most recent roms here on XDA for the otter/otterx. For an almost 6 year old tablet this thing flies. I definitley reccomend giving it a try, in fact try a few other roms before you try this one just so you can truly feel how magnificently fluid this rom is.
I used: cm-10.2-20131022-1433-otter-sgt7.zip
I got the rom here:
http://d-h.st/users/loosethisskin/?fld_id=27993#files
the guide for installing the rom is here:
http://forum.xda-developers.com/showthread.php?t=2410112
I used an ultra slim version of gapps that only installs the play store in order to save ram, you can manually install any google app you need from the play store i just did it this way to save what limited resources are available on this device. You can find the download as well as more info here:
http://forum.xda-developers.com/showthread.php?t=2435683
if you need any help or have any questions, let me know

Awesome thanks!! it might be a little while before i get around to trying that.
Here are pictures of my custom heatsink, if anyone is interested:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

im trying to root now and having the same problem as this thread: saferoot not working

moofus120 said:
im trying to root now and having the same problem as this thread: saferoot not working
Click to expand...
Click to collapse
RootMaster
Rootmaster apk
and
Rootmaster.exe run from PC
These are made by Chinese devs, not open source, but have been used by many people, with no known issues.

Update: Been using the CM/SGT7 10.2 Otter rom and its running great performance-wise, Drastic runs pretty much full speed on everything! There are some apps that I installed that just wont run tho, like smashy road and beach buggy blitz, but thats not a big deal.

Anyone tried Android P PR1?

Hey Guys, I saw that Android P stable PR1 is now available and wanted to know if someone had tried it or not. And lemme know if you got any bugs and fixes.

I Tried, working flawless, VoLTE, camera, Everything, Sometimes Fingerprint not works.. beside this everything works fine and it's super smooth.. very better than oreo, Go for It.. !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

himanshu.devsah said:
I Tried, working flawless, VoLTE, camera, Everything, Sometimes Fingerprint not works.. beside this everything works fine and it's super smooth.. very better than oreo, Go for It.. !
Click to expand...
Click to collapse
what is your rom base? and kernel ?

himanshu.devsah said:
I Tried, working flawless, VoLTE, camera, Everything, Sometimes Fingerprint not works.. beside this everything works fine and it's super smooth.. very better than oreo, Go for It.. !
Click to expand...
Click to collapse
How is the battery life and how to install.

vladimir.jz said:
what is your rom base? and kernel ?
Click to expand...
Click to collapse
Crdroid and kronic core latest. Also flash the pie lag fix zip

Could you please let me know the correct procedure to flash, it is not booting up.
Also may I know which files needs to be flashed?

noufal_pp said:
Could you please let me know the correct procedure to flash, it is not booting up.
Also may I know which files needs to be flashed?
Click to expand...
Click to collapse
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/perfect-android-p-setup-device-t3825219
Follow this thread.
The only difference is you need to flash pie lag fix zip instead of dp5 lag fix zip and install kronic core latest kernel before flashing post gsi 3 zip.

himanshu.devsah said:
I Tried, working flawless, VoLTE, camera, Everything, Sometimes Fingerprint not works.. beside this everything works fine and it's super smooth.. very better than oreo, Go for It.. !
Click to expand...
Click to collapse
himanshu.devsah said:
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/perfect-android-p-setup-device-t3825219
Follow this thread.
The only difference is you need to flash pie lag fix zip instead of dp5 lag fix zip and install kronic core latest kernel before flashing post gsi 3 zip.
Click to expand...
Click to collapse
Will it clear my internal storage?

abhijeetanand said:
Will it clear my internal storage?
Click to expand...
Click to collapse
Yes do it for BEST results.. ! I did it.. Just take a backup over PC.. !

himanshu.devsah said:
Yes do it for BEST results.. ! I did it.. Just take a backup over PC.. !
Click to expand...
Click to collapse
Thanks, and how much SOT are you getting?

abhijeetanand said:
Thanks, and how much SOT are you getting?
Click to expand...
Click to collapse
4-5 hrs SOT without AKT Profiles.. on 2nd cycle.. Battery gets improving day by day due to adaptive battery.. !

himanshu.devsah said:
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/perfect-android-p-setup-device-t3825219
Follow this thread.
The only difference is you need to flash pie lag fix zip instead of dp5 lag fix zip and install kronic core latest kernel before flashing post gsi 3 zip.
Click to expand...
Click to collapse
Can you give the link of pie lag fix

Flag dp5lagfix, it will work on pr1

himanshu.devsah said:
I Tried, working flawless, VoLTE, camera, Everything, Sometimes Fingerprint not works.. beside this everything works fine and it's super smooth.. very better than oreo, Go for It.. !
Click to expand...
Click to collapse
I'm having green color problem with front camera in Gcam.
Which Gcam are you using?
Can you give me the Gcam app that you are using?

nike sanga said:
I'm having green color problem with front camera in Gcam.
Which Gcam are you using?
Can you give me the Gcam app that you are using?
Click to expand...
Click to collapse
https://www.celsoazevedo.com/files/.../GCam_5.3.015-Pixel3Mod-Arnova8G2-v4Beta4.apk
Use this one

Can someone share the links of the 2 main files required. That is Android P PR1 and pie lag fix.
Whether we still need to flash POST-sGSI_1, POST-sGSI_2 & POST-sGSI_3.

Yes, plz share ps1 and lagfix files.. Thank-you

srihari210 said:
Yes, plz share ps1 and lagfix files.. Thank-you
Click to expand...
Click to collapse
anjath said:
Can someone share the links of the 2 main files required. That is Android P PR1 and pie lag fix.
Whether we still need to flash POST-sGSI_1, POST-sGSI_2 & POST-sGSI_3.
Click to expand...
Click to collapse
Yes u need to repeat the same steps as dp5
Here guys take this
P PR1 LAG FIX
https://drive.google.com/file/d/1tHGmb3LeXh18fvYIMiZBzr5pMQftoEJJ/view?usp=drivesdk
P PR1 DOWNLOADABLE FILES
https://androidfilehost.com/?w=files&flid=280192
Next time please use the search button. Smash thanks if i helped.

Is everything working fine? I'm thinking to upgrade to Android pie but since I'm new to this I don't want to mess up my device. Any developers here working on ROMs like Jaguar, pixel experience or any other?
Thanks in advance.

Mr Cobalt said:
Is everything working fine? I'm thinking to upgrade to Android pie but since I'm new to this I don't want to mess up my device. Any developers here working on ROMs like Jaguar, pixel experience or any other?
Thanks in advance.
Click to expand...
Click to collapse
Yes it is quite stable provided you are okay with no fingerprint sensor.
Apart from that few users have had other stability issues but if you can follow the procedure and with some trial and error, it should be fine.
You could also get fingerprint sensor working flawlessly if you're lucky. It doesn't work for me though.