My phone fell from my hand. And now the power button is not working. How to I remap it to the Search button? And will it be able to switch off/on the phone if it shuts down?
lovemoddingmyphone said:
My phone fell from my hand. And now the power button is not working. How to I remap it to the Search button? And will it be able to switch off/on the phone if it shuts down?
Click to expand...
Click to collapse
You cannot. it is hardwired to a pin, thats why you can force a reboot even if the phone locks up. You might be able to remap some functions, but not poweron/off and screen on. because when the screen is off the digitizer is in sleep mode so the search button wouldnt respond unless it was activated. Sorry to hear about you dropping the phone. Any warranty left?
No warranty
just another thought, sorry to hear about your phone. However, are you sure its the power button? since you dropped it, it might be caused by other hardware failure... you may need to consider the possibility as well..
lovemoddingmyphone said:
No warranty
Click to expand...
Click to collapse
I thought all DHD's had a 2 year warranty...
Sent from my Desire HD using Tapatalk 2
TeamDraven said:
I thought all DHD's had a 2 year warranty...
Sent from my Desire HD using Tapatalk 2
Click to expand...
Click to collapse
depending on country/distributor some comes with only 1 year. Then again, i don't think they will entertain a claim caused by user... usually only covers factory defaults.
I bought mine from the US though i Live in India. So no warranty
this means... you have to use a pin to short the switch and boot it up everytime lol. Then enable wake using vol button to wake the phone haha.
How is it not working? Is it pressed below the unibody?
if so, I had the same issue, what i did was; remove the cover (first the battery, volume buttons and gps) and then while having the backcover in my hand, I took a small stump or something alike and pressed on the button from both sides, like 5 times each side.
Then put the thing together and it worked perfectly.
I've actually done this 3 times because I drop my phone very often xD
But if it don't work you should definitely get "Tap Tap App" which makes you unlock your phone with the proximity sensor located to the right of your speaker (the little black dot).
Hope it helps! Both solutions worked for me!
*Edit, oh yeah you can get a mod to use volume buttons to wake it up aswell, as the person above me mentioned ^^
Good luck!
Sent from my Desire HD using XDA
So my screen turns off (but is still active) when the slider is nudged a bit (either when closed or open). I've never dropped it and didn't update firmware. Pretty sure its faulty but just wanted to check if anyone else had the same problem. Oh because the phone thinks screen is on to get it back I have to press the power button twice (once to lock then unlock) this works most of the time but not always in which case I have to pull the battery.
Like this?
http://www.youtube.com/watch?v=fQXH5GAf9UA&feature=youtube_gdata_player
Jordanooo said:
Like this?
http://www.youtube.com/watch?v=fQXH5GAf9UA&feature=youtube_gdata_player
Click to expand...
Click to collapse
Similar but much worse. It takes that much movement to make the screen go off but once off it doesn't come back until you press power button twice ( and sometimes not even then)
I think I'll have to send it off for repair which is a right pain as I won't have my awesome phone for ages.
When i had that problem it only took the a week to repair it
Hey guys, just wanna ask what should i do with this issue. I've had my phone for about 3.5 months now and I just started having this issue this morning. I haven't dropped my phone in any kind of way (no water damage or anything). When i woke up this morning i was trying to to tap it, but it just wont work. I rebooted my phone to TWRP and the back button is working just fine. I thought there was just something wrong with the rom i was using (wicked v5.1, its awesome btw) so i wiped my phone and re flashed it, but it didn't fixed it, I tried flashing a different rom but the results were still the same. Then i thought that its probably because of my screen protector (iloome Tampered screen protector) but then again,I've had the screen protector on for a very long time already, and i never had an issue pressing the menu and back button.
For clarification, which is not working?
You mentioned you tapped the screen and nothing happened.
Is the screen not responsive to touch?
You mentioned that the back button works in recovery.
You also mentioned you never had issues with back and menu buttons.
What is not working, and is the issue intermittent?
hello, thanks for the rep.
Biker1 said:
For clarification, which is not working?
You mentioned you tapped the screen and nothing happened.
Is the screen not responsive to touch?
You mentioned that the back button works in recovery.
You also mentioned you never had issues with back and menu buttons.
What is not working, and is the issue intermittent?
Click to expand...
Click to collapse
Im talking about the capacitive back button, and when i mentioned that it works in TWRP, im specifically talking about the capacitive button, not the on screen buttons like on nexus devices. And it also seems to work sometimes if i pressed on it hard enough while its connected to my charger.
Beelzebub24 said:
Im talking about the capacitive back button, and when i mentioned that it works in TWRP, im specifically talking about the capacitive button, not the on screen buttons like on nexus devices. And it also seems to work sometimes if i pressed on it hard enough while its connected to my charger.
Click to expand...
Click to collapse
Hmm....
So the back capacitive button is working intermittently.
Sounds like a possible hardware issue.
I know you don't want to, but to rule out the protector, one would have to remove it, but that canbe sa last resort.
If all else fails to resolve issues, and you have insurance, you'd have torremove it anyway. Even if under Samsung warranty and no insurance.
- you can try the setting that's used for gloved hands which increases screen touch sensitivity. I forget it's exact location, but easy to find out.
- you can check if this is a known issue, etc.
- try wiping cache and dalvik cache in Recovery again
EDIT: Fixed it (for now). Copied from my post on site 2.
What's up guys, I'm sorry for the late followup. It turned out, that I was too lazy to send it back. Now, almost a year later, I'd gotten into fixing phones and got the courage to open up the device and see what's up with the power button. It felt like the issue has been a bit less noticeable recently but I checked the replacement parts prices and how to open our phone up.
I think I've fixed the issue by adding one layer of electrical tape over the button-contact. I believe the issue is that the pin a just a little bit too short to reliably properly click the button.
Short tutorial:
Turn the device off and remove the simcard bracket.
It's actually super easy and you don't need to screw or remove anything. Google "Xiaomi MI A2 LITE disassembly screen battery smontaggio" you'll find a video, in the beginning the guy shows how to remove the backcover. I've used a hard, plectrom-looking "opening-pick" at the bottom, then carefully but firmly around the sites. You don't even need to remove the flex cable from the back, just make sure you don't rip it off. Cut off a short bit from the electrical tape, tape it from the battery to the contact, so it doesn't fall off. Close the case again, turn it on and check whether the powerbutton still clicks (doesn't stick) and test the screen lock. Post back if this has worked or if you've tried it.
Click to expand...
Click to collapse
Does anybody have a similar issue?
I've ordered the device from gearbest to Europe. Everything worked nicely.
However, recently when I hit the power button it sometimes triggers the double click interaction and opens my camera. I've tested a few ways to press it slightly from the side, with more force or less. However it will 1/3 times vibrate and start the camera like I had double clicked it, it's more likely when I hit it a bit too lightly though. Could it already be worn out after 2 months? This never happened when the device was new as far as I ran remember.
Yes I'm aware that I could change the camera shortcut but this doesn't stop me from worrying about whether my powerbutton will give out soon.
I was using the phone happily in the case Xiaomi has provided. Dropped the phone once and got a little scratch on the VOL Button but other than that, nothing crazy has happened. Does anyone have a clue whether they will still replace it? I'd gotten it in mid-August.
<message deleted>
Buttons are usually the main gate to "planned obsolescence". I bought this device after my nexus 5 power button started working funny (I physically removed it and worked only with gestures). So, now I try not to press the button unless necessary. I unlock with fingerprint, and lock with Greenify.
In other words. Make sure of it, if the button starts working funny, I'd file a warranty claim. Or it won't last long and warranty will expire eventually. It can happen with this device and with any other piece of tech.
My opinion.
If you do place a warranty claim, let us know how xiaomi's customer service works in Europe.
needhelpgeez said:
Does anybody have a similar issue?
I've ordered the device from gearbest to Europe. Everything worked nicely.
However, recently when I hit the power button it sometimes triggers the double click interaction and opens my camera. I've tested a few ways to press it slightly from the side, with more force or less. However it will 1/3 times vibrate and start the camera like I had double clicked it, it's more likely when I hit it a bit too lightly though. Could it already be worn out after 2 months? This never happened when the device was new as far as I ran remember.
Yes I'm aware that I could change the camera shortcut but this doesn't stop me from worrying about whether my powerbutton will give out soon.
I was using the phone happily in the case Xiaomi has provided. Dropped the phone once and got a little scratch on the VOL Button but other than that, nothing crazy has happened. Does anyone have a clue whether they will still replace it? I'd gotten it in mid-August.
Click to expand...
Click to collapse
when you dropped it
the power button may have got stuck
this is possible and I've seen it on some other devices
you can open it yourself if you don't care for warranty like i do
but the safest option is to claim warranty and yes they would replace it
needhelpgeez said:
Does anybody have a similar issue?
I've ordered the device from gearbest to Europe. Everything worked nicely.
However, recently when I hit the power button it sometimes triggers the double click interaction and opens my camera. I've tested a few ways to press it slightly from the side, with more force or less. However it will 1/3 times vibrate and start the camera like I had double clicked it, it's more likely when I hit it a bit too lightly though. Could it already be worn out after 2 months? This never happened when the device was new as far as I ran remember.
Click to expand...
Click to collapse
I have the exact same issue. It started when I installed the Oreo update, but it could be a coincidence. I'm still looking for a fix.
It also happens to me, and I didn't drop the phone... Is there a way to change the shortcut to, maybe, press the power button 3 times instead of 2?
Enviado desde mi Mi A2 Lite mediante Tapatalk
ovejota said:
It also happens to me, and I didn't drop the phone... Is there a way to change the shortcut to, maybe, press the power button 3 times instead of 2?
Enviado desde mi Mi A2 Lite mediante Tapatalk
Click to expand...
Click to collapse
It happens to me too, I disabled the shortcut and just not using it right now. I don't think there is a way to change the shortcut
It happens to me....
It happened for me as well.
And i think it's a software bug, not hardware..
avi_soft said:
It happened for me as well.
And i think it's a software bug, not hardware..
Click to expand...
Click to collapse
Same here, never crashed on the floor, it's software issue
sinthemau said:
Same here, never crashed on the floor, it's software issue
Click to expand...
Click to collapse
It obviously is not a software issue. This means that they've used cheap contact points on the button if this happens to many of us. This is a hardware issue.
marstonpear said:
It obviously is not a software issue. This means that they've used cheap contact points on the button if this happens to many of us. This is a hardware issue.
Click to expand...
Click to collapse
I'm having this issue since day one. It is obviously software, otherwise the same contact problem would occur when turning the screen ON, but it never happens. Solution is to disable the feature under System -> Gestures -> Jump to camera.
i also dissabled the camera gesture because of this issue.
im sure this is reasoned by a more or less loose power button and not an software issue
fugu5 said:
I'm having this issue since day one. It is obviously software, otherwise the same contact problem would occur when turning the screen ON, but it never happens. Solution is to disable the feature under System -> Gestures -> Jump to camera.
Click to expand...
Click to collapse
How can that be a software issue? Same issue happens to me whenever I use the power button, either to lock the screen or unlock the screen. Also if it was a software issue, it could be fixed via installing a GSI. That doesn't fix it either.
marstonpear said:
How can that be a software issue? Same issue happens to me whenever I use the power button, either to lock the screen or unlock the screen. Also if it was a software issue, it could be fixed via installing a GSI. That doesn't fix it either.
Click to expand...
Click to collapse
Let me break it down and you can tell me if I'm missing something.
1. Many users are reporting that the camera app starts when pushing the power button to turn the screen off.
2. They are not reporting any other issue with the power button, like the camera app starting when they try to turn the screen on, the button being irresponsive, or the camera app NOT starting when they deliberately push the button twice.
3. The problem reportedly goes away if the double-push gesture is turned off in settings.
Do you still think this is a hardware issue?
fugu5 said:
Let me break it down and you can tell me if I'm missing something.
1. Many users are reporting that the camera app starts when pushing the power button to turn the screen off.
2. They are not reporting any other issue with the power button, like the camera app starting when they try to turn the screen on, the button being irresponsive, or the camera app NOT starting when they deliberately push the button twice.
3. The problem reportedly goes away if the double-push gesture is turned off in settings.
Do you still think this is a hardware issue?
Click to expand...
Click to collapse
When I disable double press gesture from Gestures, still when I sometimes hit the power button, the phone locks and closes the screen and then turns the screen on again which means that it still registers one presses sometimes as double presses. Also if you've ever used a keyboard or a mouse or anything electrical with buttons on it, these appliances do the same sometimes even though you tap one button they sometimes register it twice. Which is a hardware issue. I still can't see any software issue here. When you disable the double press gesture, it doesn't launch the camera anymore but it turns on the screen after locking it (sometimes as usual)
marstonpear said:
When I disable double press gesture from Gestures, still when I sometimes hit the power button, the phone locks and closes the screen and then turns the screen on again which means that it still registers one presses sometimes as double presses. Also if you've ever used a keyboard or a mouse or anything electrical with buttons on it, these appliances do the same sometimes even though you tap one button they sometimes register it twice. Which is a hardware issue. I still can't see any software issue here. When you disable the double press gesture, it doesn't launch the camera anymore but it turns on the screen after locking it (sometimes as usual)
Click to expand...
Click to collapse
Not for me, so it's possible that these are actually two different problems with this phone. I wouldn't be surprised. :laugh:
fugu5 said:
Not for me, so it's possible that these are actually two different problems with this phone. I wouldn't be surprised. :laugh:
Click to expand...
Click to collapse
Yeah me neither. They don't look like they're going to fix anything or listen to users either. I'm happy with stock Android though.
Hi guys, for me, the problem has fixed disabling the option "Power button lock the phone", and set the option "Lock automatically": immediately.
The fix
What's up guys, I'm sorry for the late followup. It turned out, that I was too lazy to send it back. Now, almost a year later, I'd gotten into fixing phones and got the courage to open up the device and see what's up with the power button, without disabling the functionality. It felt like the issue has been a bit less noticeable recently but I checked the replacement parts prices and how to open our phone up.
I think I've fixed the issue by adding one layer of electrical tape over the button-contact. I believe the issue is that the pin a just a little bit too short to reliably properly click the button.
Short tutorial:
Turn the device off and remove the simcard bracket.
It's actually super easy and you don't need to screw or remove anything. Google "Xiaomi MI A2 LITE disassembly screen battery smontaggio" you'll find a video, in the beginning the guy shows how to remove the backcover. I've used a hard, plectrom-looking "opening-pick" at the bottom, then carefully but firmly around the sites. You don't even need to remove the flex cable from the back, just make sure you don't rip it off. Cut off a short bit from the electrical tape, tape it from the battery to the contact, so it doesn't fall off. Close the case again, turn it on and check whether the powerbutton still clicks (doesn't stick) and test the screen lock. Post back if this has worked or if you've tried it.
I changed the power/volume button assembly outright just the other day, and so far I'm not getting this issue anymore.
I recorded myself doing it here, so you can see how easy (or hard) it is: https://youtu.be/q8kaY-v0q_Q
Greeting,
I have a weird issue where occasionally after I unlock my phone, my screen doesn't respond to touches.
The phone works and responds to physical button presses but not touch.
Not sure exactly when it started happening but I've noticed this since last week.
Any idea what might be causing this?
I'm running Android Pie 52.0.A.3.202.
Sydrox said:
Greeting,
I have a weird issue where occasionally after I unlock my phone, my screen doesn't respond to touches.
The phone works and responds to physical button presses but not touch.
Not sure exactly when it started happening but I've noticed this since last week.
Any idea what might be causing this?
I'm running Android Pie 52.0.A.3.202.
Click to expand...
Click to collapse
Please upgrade to the newest firmware.
Sydrox said:
Greeting,
I have a weird issue where occasionally after I unlock my phone, my screen doesn't respond to touches.
The phone works and responds to physical button presses but not touch.
Not sure exactly when it started happening but I've noticed this since last week.
Any idea what might be causing this?
I'm running Android Pie 52.0.A.3.202.
Click to expand...
Click to collapse
Got the same issue on 52.0.A.8.50. Usually opening the app drawer then hitting back solves it - otherwise none of the virtual buttons work.
Searching the web it seems touch screen issues are pretty common on this phone. I'm a bit surprised there isn't more being said here about it. Some experience delayed response, dead areas and no response at all. I have all those issues. Yes I am on the latest firmware. I bought the phone used with a cracked screen. I checked it out and everything seemed fine. I didn't use the phone, just set it aside til replacement screen came. I should have used the phone to thoroughly check it out but didn't want to go through the set up process as I was thinking of B/L unlock and root. New screen came, put it on and seemed to be working fine then screen would be unresponsive. I did factory reset, software update, software repair, went into settings and made sure sure everything was good there, nothing helped. The center of the screen (it's low and a bit off center) is pretty much dead. To open launcher I have to touch and hold near the top of the display. Touch and hold apps is tricky. Usually the app just opens. When I do get it to hold, I can't drag it anywhere. Also, icons in the drop down menu cannot be rearranged or edited. I can swipe up/down, side to no problem. Whenever touch goes dead completely, the home, back and minimize buttons go grey. Tapping the power button gets them back functioning again. . Function test fail. Free draw lets me make a few seconds of scribbles then freezes. The x and rectangle block draw does the same. Tapping power button does nothing to unfreeze either. The color test pass even the block one where you toggle on/off sections of the screen in blocks. It's really weird. First impression would lead me to the screen but it really acts like a software issue. From what I've read so far this phone uses two different display drivers. I not seen anything on how to change that and it would more than likely mean B/L unlock and root, which I'm not against doing. I would just like to know definitively if it's hardware or software. Any input would be greatly appreciated.
Thanks
bobsright said:
Searching the web it seems touch screen issues are pretty common on this phone. I'm a bit surprised there isn't more being said here about it. Some experience delayed response, dead areas and no response at all. I have all those issues. Yes I am on the latest firmware. I bought the phone used with a cracked screen. I checked it out and everything seemed fine. I didn't use the phone, just set it aside til replacement screen came. I should have used the phone to thoroughly check it out but didn't want to go through the set up process as I was thinking of B/L unlock and root. New screen came, put it on and seemed to be working fine then screen would be unresponsive. I did factory reset, software update, software repair, went into settings and made sure sure everything was good there, nothing helped. The center of the screen (it's low and a bit off center) is pretty much dead. To open launcher I have to touch and hold near the top of the display. Touch and hold apps is tricky. Usually the app just opens. When I do get it to hold, I can't drag it anywhere. Also, icons in the drop down menu cannot be rearranged or edited. I can swipe up/down, side to no problem. Whenever touch goes dead completely, the home, back and minimize buttons go grey. Tapping the power button gets them back functioning again. . Function test fail. Free draw lets me make a few seconds of scribbles then freezes. The x and rectangle block draw does the same. Tapping power button does nothing to unfreeze either. The color test pass even the block one where you toggle on/off sections of the screen in blocks. It's really weird. First impression would lead me to the screen but it really acts like a software issue. From what I've read so far this phone uses two different display drivers. I not seen anything on how to change that and it would more than likely mean B/L unlock and root, which I'm not against doing. I would just like to know definitively if it's hardware or software. Any input would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
Maybe the Screen Connector wasn't 100% clean.
Or not only the screen is damaged.
I heard that the touch problems are mostly fixed with PIE. The closed source clearpad touch driver is..... Hoping Q gives us an further updated driver.
You still get sometimes ghost touches on higher workload or if the keyboard app is slow, but if you have dead spots the hardware sounds damaged.