So long story short, deleted supersu after they said there was an update available, then i was stuck in a bootloop clockwork recovery limbo, wouldnt read my usb at all tried 5X usb cords and multiple pcs and nothing, eventually after many hours of forum diving i installed twrp which made my phone accesible via usb finally and allowed odin to flash properly (tried odin,kies and smartswitch prior to no avail) YAY!!!! i then tried installing latest firmware which gave me an error and sent me to recovery which looked nothing like twrp, i assume this was the stock recovery, i then went to the 5.11 earlier version and it installed succesfully via odin and now im at a 30 minute + "Samsung s6 edge + powered by andriod" plz help me, i spent 600 usd cause i dont beleieve in contracts with t mobile, that would be a devastating loss.
any input would be greatly appreciated
thank you
jacob
Related
I'm kind of stuck here. I'm not big into flashing roms and stuff.....but had issues with the one ROM I flashed 2 years agao so I thought I'd upgrade to CM10 finally. I flashed it properly using CWM and had a working rom....but forgot todarkside super wipe and to install the gapps.zip. So I thought I'd just do it over again. Everything seemed fine in the reinstallations of all 3.....but when I started the phone up it got stuck on a boot loop on the Cyanogen animation. No big deal....I'll just flash it again. Go into recovery mode.....wipe the data/cache.....it freezes on the cache. Try to flash the rom, cWM , the old rom, anything.......it gets stuck on the first "Installing....." . Not good. Can't do anything in CWM.
So I read a million webpages trying to figure out what to do next......someone else had to have had this problem. Seems like my only option is to go through Odin and flash it there. I make sure I get the USB drivers from Samsung and install those first. The installation goes through no problem......I reboot....and then try to plug in my phone via Download Mode. I make sure I use the USB cable that came with my phone and use a powered port on the back of my computer (XP btw). Windows recognizes it with its usual bull**** fanfare of 3 different notifications......"Found New Hardware!" then it says Found! "MSM8x60" then it says Windows failed to fully install new hardware. In the Device Manager its shown as the "Samsung Mobile USB CDC Composite Device" with the dreaded yellow exclamation mark on it. I tried uninstalling the drivers....rebooting.....and then reinstalling. No luck. Tried an older driver package.....no luck. I've spent hours trying every combination with no luck. I can't get Windows to recognize it....or more importantly.....Odin to recognize it. Any thoughts? Thanks.
Sorry for my English.
A lot of different things can happen if you are not using the correct version of recovery. The latest recovery doesn't always mean it will flash properly. For example I had to use TWRP 2.6 for 4.3 based ROM and had to roll back to TWRP 2.5 for some other versions of a rom. I don't know which version of CM you are using but maybe try TWRP or another version of CM.
Sent from my SGH-T989D using Tapatalk
Yeah....that makes sense. But how do I flash a different version of CWM? I can't get the phone detected by Odin.
Resolved.....tried a couple of other PCs....found one that worked
So This is my first time posting on any forum site for help, and i was refereed to XDA by my roommate. so what happened is a few months ago i asked my roommate to root my galaxy s3 SGH-I747, after he rooted it through odin and all seemed well, BUT we never could get the phone to recognize the root and was still unable to access any root functions. so after a few different attempts we gave up. i assumed that my roommate had removed the root (bad call) but never gave it any thought. a few days ago at&t started bugging me with a software update. i just hit ignore and it would pop up again in a few hours and the icon would never go away. so i gave in and started the update. i didnt pay the phone any attention while it "updated" but later that morning i went to turn it back on and it would get to the Samsung screen then the next screen but after that it goes black and vibrates. i showed it to my roommate and he informed me that it was never restored back to official frimware like i had previously assumed. and that it never should have received the update bc it was still on a custom frimware. we tried flashing the stock frimware back on the phone and every time it would fail the nand write. i believe it was updated to 4.4.2 before i received the update from AT&T and we tried many different ways too restore it i even tried the recovery in Kies 3 but all it says is "connecting" then connection failed. so far nothing has worked. i believe that the update contained android 5.0 and maybe that is the reason none of the other ways we tried worked. i have been researching for hours trying to find a similar case but nothing matches, and i cant find a single working solution that doesn't involve possible making it worse. i can access both the recovery and download modes. please any information or help would be greatly appreciated.
Flash a custom recovery such as Philz Touch via Odin, install cm10.2 via your custom recovery. This should get the phone booted so you can determine the bootloader version on your phone. The NAND error is due to the fact that you are trying to downgrade the bootloader in Odin. Don't flash anything with Odin until you determine the bootloader. Doing so could hard brick your phone.
audit13 said:
Flash a custom recovery such as Philz Touch via Odin, install cm10.2 via your custom recovery. This should get the phone booted so you can determine the bootloader version on your phone. The NAND error is due to the fact that you are trying to downgrade the bootloader in Odin. Don't flash anything with Odin until you determine the bootloader. Doing so could hard brick your phone.
Click to expand...
Click to collapse
firstly, thanks for the fast help. i did as you advised and flashed philz touch 6.15.4 which is the latest version from what i understand. that worked flawlessly. the problem now, is with cm10.2 every time ive tried to install it i get an error in /storage/sdcard1/cm-10.2.0-d2att.zip.
im sure im doing everything correctly. any ideas?
Try flashing an older CM11 ROM for the d2lte.
audit13 said:
Try flashing an older CM11 ROM for the d2lte.
Click to expand...
Click to collapse
thanks so much man youve been a big help that worked.
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
You probably need to do a factory reset
In the future you should make a full backup before installing a rom
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
AHH!! Sorry to have made this post... here's what I did to get it actually boot:
reflahed the stock firmware through odin again, tried to reboot, it failed, obviously. rebooted to recovery, factory reset in recovery, power down option in recovery, then turned the phone on again and it magically worked!
hopefully this post will help someone who encountered the same issue
eousphoros said:
You probably need to do a factory reset
In the future you should make a full backup before installing a rom
Click to expand...
Click to collapse
thank you so much for the quick reply, I ended up figuring out the solution while you were typing. sorry to pull you away from other tasks. I have several backups saved to my PC but thank you for the reminder!! :laugh::laugh:
kswa1987 said:
AHH!! Sorry to have made this post... here's what I did to get it actually boot:
reflahed the stock firmware through odin again, tried to reboot, it failed, obviously. rebooted to recovery, factory reset in recovery, power down option in recovery, then turned the phone on again and it magically worked!
hopefully this post will help someone who encountered the same issue
Click to expand...
Click to collapse
I had the same excat same thing happen when flashing this via Odin. I didnt need to Odin stock twice though . I just booted stock recovery and did a factory reset. After that I went ahead an powered down and rebooted . All good now
How long did you have to wait in the stock recovery to get past the "installing system update" screen? Mine just sits there and I'm unable to view other options in recovery.
EDIT for noobs (like me): wait 30 seconds on the "installing system update" screen.
I'm still stuck in boot loop
Im in the same exact situation , but I'm still stuck in boot loop. I followed your restore instructions and nothing. Please help.
Creel711 said:
Im in the same exact situation , but I'm still stuck in boot loop. I followed your restore instructions and nothing. Please help.
Click to expand...
Click to collapse
Looks here, may apply to your case. http://forum.xda-developers.com/showthread.php?p=63226466
Pp.
I initially used odin to flash OI1 update, after a rom I was using caused problems and I got bootloop. It changed bootloader value to b:3 and I'm unable to downgrade now so I used smart switch which didn't recognize device so used emergency recovery and still bootloop. I have factory reset and wipe cache multiple times along with adb side load and individual flashes of bootloader, modem, kernel, flashed custom kernel and twrp to access fix permissions and to mount partitions with advanced wipe etc and still wont boot past logo. Also during one fix attempt phone said can't mount system.. Idk I'm not understanding where the problem is .everything says successful but I'm still in bootloop. Please help. I've spent hours everyday for the past week searching & trying different things that seem might help so open to any suggestions.
Problem with Samsung Galaxy S4 Mini GT-I9195
Hi everyone
I'm new to the whole ROM flashing and using Odin. I had a bootloop problem and recovery mode showed all the options but has a green android man laying down with red icon above him and No Command below the android man. Tried the factory wipe and cache wipe but it gives some red writing with the word failed in the coding and the word error under the android man. Tried to flash a stock ROM from sammobile using Odin. Odin gives a pass but the same problems persist. Can someone please help?
any solution, i have this problem to? only bootloop, nothing else. Updatet bootloader with 4up
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
had the same issue ... did a factory wipe...(had lineage os 14 installed with gapps 7.1.1) flashed stock rom using odin(success) . stuck in bootloop(samsung logo fades in and out) pleaase help (sm-g900H)
Very usefull post, same issue, solved trough recovery->wipedata/factoryreset. Thanks!!!!
my s6 was freezing and restarting again and again, I reinstalled the firmware for odin and then it didn't encounter any problem for a whole day but now i have the same problem again - freezing and restarting
any help would be appreciated
I am already done with factory reset and wiping cache partition but still nothing turnout to be helpful
Hi Please help me.
I did everything that mentioned but no succes at all. Any new suggestion?
Btw my phone passing ODIN and stuck in "installing system updates then erasing"
hello
i need downgred g925t frome androide 7 to 6 or 5.1.1
can anyone help me
im flashed phone whit dis frimwer from anroide 7 G925TUVS6FRC1_G925TTMB6FRC1_TMB
im dawnloaded this frimwer 4Files-G925TTMB3EPD1-6.0.1-By-NoLoGiG but not work or not flashed have error
I've searched, I've tried but to no avail have I been able to fix my poor note 8..and I'm hoping someone can help!
I HAD a stock 4.4.2 Note 8 (AT&T version I-467) running, and I went with the Kingroot method to root. The device rooted but ran like a dog, and in my infinite wisdom did a wipe/reset to see if that would help.
Now here is where I stand:
1) The device boots to a screen saying unauthorized firmware
2) I can get to download mode (power+vol. down+Home)
3) I can NOT get to the screen with (power+col. up+Home)
I have tried Kies, and it won't take the serial number/model number, and Odin can only seem to flash the boot loaders. I have tried 4 different ROM's from samsung (with different international codes), and none of them are able to update the system (they all fail at about 90%). I've tried the all in one toolkit, and since I can't enable USB debugging at this point, it never recognizes the device as attached.
I've tried manually flashing with Odin TWRP, Phils, and stock recovery,(in the hopes of getting one to take so I could load a new ROM from SD card) and they all fail as well.
When I split any of the system images I can load a boot loader file from them, and it succeeds, but everything else fails.
Can anyone point me in the right direction, or am I completely hosed?
Sparkinman said:
I've searched, I've tried but to no avail have I been able to fix my poor note 8..and I'm hoping someone can help!
I HAD a stock 4.4.2 Note 8 (AT&T version I-467) running, and I went with the Kingroot method to root. The device rooted but ran like a dog, and in my infinite wisdom did a wipe/reset to see if that would help.
Now here is where I stand:
1) The device boots to a screen saying unauthorized firmware
2) I can get to download mode (power+vol. down+Home)
3) I can NOT get to the screen with (power+col. up+Home)
I have tried Kies, and it won't take the serial number/model number, and Odin can only seem to flash the boot loaders. I have tried 4 different ROM's from samsung (with different international codes), and none of them are able to update the system (they all fail at about 90%). I've tried the all in one toolkit, and since I can't enable USB debugging at this point, it never recognizes the device as attached.
I've tried manually flashing with Odin TWRP, Phils, and stock recovery,(in the hopes of getting one to take so I could load a new ROM from SD card) and they all fail as well.
When I split any of the system images I can load a boot loader file from them, and it succeeds, but everything else fails.
Can anyone point me in the right direction, or am I completely hosed?
Click to expand...
Click to collapse
+1 on that, I'm stuck in an exact same situation. No help from Samsung either. After rooting with Kingroot my tab started acting like crazy with flickering screen and random reboots, did exactly like you did.
There are many with similar issue and as per my research most of them have given up. Getting a system image dump from a rooted tab running 4.4.2 might be the only way out. Unless of course Samsung/AT&T decides to release full odin flashable image.
I was in a similar situation from trying to fix a eff problem and took my sgh-i467 to a Samsung Experience Center located in many Best Buys and they fixed it free of charge. They were not able to fix my issue with a corrupted EFF file that is keeping my 4G from working though as I had hoped. If you have a Best Buy around with the Samsung Kiosk in it I would give it a try. I ended up trying a few different ones to fix the eff issue and some of the employees at the Samsung centers were about as smart as a head of cabbage (they laughed at me when I said my Note 8 was the issue and said "you can't have a Note 8 the Note 5 just came out") but some were at least helpful and listened when I told them they have the tools to fix my tab (reflash it back to life) and they did. Hopefully they can help you.
man Im in the same exact situation.. And I cant seem to find any help anywhere. I cant locate a stock 4.4.2 kit kat odin flashable file anywhere for the n5120
Sparkinman said:
I've searched, I've tried but to no avail have I been able to fix my poor note 8..and I'm hoping someone can help!
I HAD a stock 4.4.2 Note 8 (AT&T version I-467) running, and I went with the Kingroot method to root. The device rooted but ran like a dog, and in my infinite wisdom did a wipe/reset to see if that would help.
Now here is where I stand:
1) The device boots to a screen saying unauthorized firmware
2) I can get to download mode (power+vol. down+Home)
3) I can NOT get to the screen with (power+col. up+Home)
I have tried Kies, and it won't take the serial number/model number, and Odin can only seem to flash the boot loaders. I have tried 4 different ROM's from samsung (with different international codes), and none of them are able to update the system (they all fail at about 90%). I've tried the all in one toolkit, and since I can't enable USB debugging at this point, it never recognizes the device as attached.
I've tried manually flashing with Odin TWRP, Phils, and stock recovery,(in the hopes of getting one to take so I could load a new ROM from SD card) and they all fail as well.
When I split any of the system images I can load a boot loader file from them, and it succeeds, but everything else fails.
Can anyone point me in the right direction, or am I completely hosed?
Click to expand...
Click to collapse
please help me i need de 4 files repair from this tablet
Try the forum thread started by djjiz, https://forum.xda-developers.com/galaxy-note-8-0/help/i467-4-4-2-t3537302... He posted the files and yes I was able to bring back my previously bricked AT&T Note 8.
Hi.
Apologies for my stupidity in advance, but i need some help.
I recently rooted my samsung GalaxyTab s8.4 (SM-T700).
The root app wouldnt work, kept saying it needed to update but kept failing to update, so i reflashed it.
It worked, but now the screen would flicker randomly and it would reboot ranodmly.
I downloaded the stock rom to try and go back to the beginning and althouth it installed, now when i turn on the tablet it starts "optimizing apps", gets to about 170 out of 206 and reboots. Keeps doing this.
I downloaded a different rom to try get out of this, but in odin, it only gets as far as "SetupConnection", fails and doesnt update the tablet.
I have tried different usb cables, different ports, reinstalling the samsung drivers, rebooting my pc, different versions of odin and different rom's but all with the same result.
So i am stuck. is there a way to load on a rom using the microsd card? do i have any alternatives or is my device now a paperweight?
Appreciate any help you can provide.
Thanks.
Amazingly, after letting it reboot about what felt like 20 times, it came back to life!
Unfortunately, it still has the screen flickr & reboot issue, which i believe ( from googling) is just the lastest lollypop release for the s8.4 not being good.
Is it possible to roll back to kitkat?
did you do a full wipe?