Related
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Good Job done
Built from source or using web builder?
i cant flash this through sp - tool
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Credits:
I, Me & Myself..
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
while downloading i got the error
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
First Check if the MTK drivers are installed, check it by going tinto the device managers hardware section in my computer
If it is proper then try connecting your phone without the battery inserted
Same problem..
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
i ported this recovery from a ZOPO Z900 Leader chinese android handset...i tried building from source, but i failed at it because of partition style in a18...
For people facing problems flashing it through sp tools, u all can try to flash it using another pc or alternatively view this youtube video -> http://www.youtube.com/watch?v=969xwsUTkSY
ujjwalk308 said:
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
Click to expand...
Click to collapse
Same problem here.
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
vshlkmr said:
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
Click to expand...
Click to collapse
Ok.now waiting for the bugfix.
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
always usb cable error
Connect usb cable & discconet auto & charging mode
this is usb driver ????
great job. im a noob at this so will try after people posting have successfully ported the cwm to their phone
There are two recovery.img files in your attachments. recovery.img and cwmfinal.img. Which one should be used in sp flash tool?
I recently purchased Karbonn a21, can I try this on it?
Sent from my GT-I9300 using xda app-developers app
Thnx bro worked like a charm.
Sent from my Karbonn_A18 using xda app-developers app
fail root
plz send device manager screen shot
Can anyone please upload stock rom of karbonn a18. My device stock at boot animation screen.
Sent from my GT-P1000 using xda premium
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
same problem any help pz
Cwm flashed
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
will you please give CWM for Micromax A90 specification maybe same as A18
here is Specification
Micromax A90
Super Amoled Plus LCD with 262 k
MTK6575 CPU 1 Ghz
512 MB RAM (350 - 400) User available
512 MB ROM ( its not RAM ) for apps
2.5 GB external SD for media file ( Music/Video,,,etc.)
8 Mega Pixel Camera + 0. Mega Pixel Front Camera
Android OS 4.0.3
with Rooted cell
plz help us to create new CWM + Custom ROM
also its same specification from some Chinese Brand like Zoppo / Hero / Gionnee / HDC
plz help.
Pritesh.mohan said:
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
Click to expand...
Click to collapse
You could do that before flashing Cwm aswell.. Use rom toolbox.. I did it the day I got this phone
i updated my canvas a1 to android marshmallow, after that i rooted my device using android one tool kit after rebooting it is stuck on boot screen animation screen.
please help me
Please provide more detail or just describe what you tried and what happened.
its beacuse android m cant be rooted without flashing custom kernel. it goes into bootloop. so first download thnderzap kernel 3.5.zip , flash it and then download supersu.zip and flash it. then it will 100%work.
How to install custom recovery in a handset that is bootlooping?
Please tell us the procedure
Boot in fastboot mode and flash recovery from there .
aaqib846 said:
i updated my canvas a1 to android marshmallow, after that i rooted my device using android one tool kit after rebooting it is stuck on boot screen animation screen.
please help me
Click to expand...
Click to collapse
STEP 1: DOWNLOAD the FLASH TOOL from this this link :LINK TO DOWNLOAD FILE
It is almost 30 MB in Size. And EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) of your computer.
STEP 2: DOWNLOAD LOLLIPOP FLASH FILE
DOWNLOAD LINK FOR LOLLIPOP: HERE
After downloading this flash file EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) on your computer.
STEP 3: NOW INSTALL DRIVERS:
YOU NEED TO BE ON WINDOWS 7 TO INSTALL DRIVERS (WINDOWS 8 DOESN'T SUPPORT THIS DRIVER / PHONE IS NOT DETECTED)
DOWNLOAD DRIVERS from this link : HERE
EXTRACT AND INSTALL THE DRIVERS : Next next next and finish If you see an security warning ( a red coloured pop up ) choose INSTALL IT ANYWAY
IT IS RECOMMENDED YOU TO RESTART YOUR PC.
STEP 4:
Now we have Extrated /unziped 2 files. One is FLASHTOOLS and other is FLASH FILE and Extracted it or unziped it to Desktop or Somewhere.
One of it having the name SP_Flash_Tool_exe_windows_v5.1424.00 or open both folders then one of it having the flashing tool. OPEN THE FOLDER NAMED SP_Flash_Tool_exe_windows_v5.1424.00
it contains an application named fashtool.exe OPEN IT
NOW THE APPLICATION IS ASKING FOR SCATTER LOADING FILE
its a txt file which is on the extracted flash file folder
BROWSE it by clicking Button named Scatter Loading
click OPEN
STEP 5:
HERE IN THE DROPDOWN BOX, IT SAYS DOWNLOAD ONLY, CLICK ON IT AND SELECT FIRMWARE UPDATE ONLY.
IF YOU SELECT FORMAT + DOWNLOAD, THEN YOU WILL LOOSE IMEI NUMBER.
NOW CLICK DOWNLOAD BUTTON ( GREEN ARROWED BUTTON NAMED DOWNLOAD )
IN CASE YOU LOOSE IMEI NUMBER, THEN REFER HERE
STEP 6:
Now SWITCH OFF your PHONE and REMOVE BATTERY
STEP 7:
CONNECT your PC via USB CABLE
wait for the driver Detection.
THE FLASHING PROCESS WILL START AUTOMATICALLY you can See the progress in progress bar which is on bottom of flashing tool Application.
WHEN IT IS FINISHED DISCONNECT USB AND RESTART YOUR PHONE.
NOW YOU WILL GET LOLLIPOP UPDATE IMMEDIATELY.
NOW REFER HERE TO ROOT MARSHMALLOW
:good::good:HIT THANKS IF HELPED:good::good:
Hello friend, I followed the steps in above instructions. But after clicking download, nothing happens. I have installed all the drivers but my phone is not detecting when battery is removed. Can you help please ....
Best answer :
aaqib846 said:
i updated my canvas a1 to android marshmallow, after that i rooted my device using android one tool kit after rebooting it is stuck on boot screen animation screen.
please help me
Click to expand...
Click to collapse
Hey dude you can try this awesome way
1st install a custom recovery
2nd download CyanogenMod (avialable cm13 android version 6.0.1) from YouTube or Google
3rd download gapps for android 6 from xda developers
4th boot into recovery mode
5th wipe user data
6th wipe cache partition
7th install zip 1st CM 13
Then 2nd Gapps
8th reboot system now
Enjoy the CM13 official ROM on A1
Root access in Inbuilt
For root access :
1st go to settings
2nd go to about phone
3rd enable developer options by tapping built number 7times
4th back in developer options enable root access.
Enjoy...
canvas a1 stuck at boot animation
i flashed my a1 using sp flash it was successful. but now when i switch on my phone its stuck at animation
100%&100% working ROOT TWRP Recovery & bootloop restart solution LeTV Le1s x507&x509
TWRP Recovery & root & bootloop restart
solution LeTV Le1s x507&x509 Indian Version
No more brick and bootloop problem
100%tested solution 8s&14s
New Method added
18/05/2016
Backup all internal storage
install pdanet and preloder driverhttps://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
http://pdanet.co/a/
restart pc
Download new Rar filehttps://drive.google.com/file/d/0B5KBP3GG99Q2aU1wNnYwakliUHM/view?usp=sharing?Extract folder Desktop
Go to mobile settings >> About Phone >>
tap Version 7 Times and hit back
U will have a new option just
above the About Phone option called Developer Options
open it and select USB Debugging
Connect the mobile with pc through USB cable
how to unlock bootloder
duble click recovery bat press any key to enter fastboot mode
After it Reboots
close cmd.exe
press shift+right click select open command windows here
Type fastboot oem unlock HIT ENTER
press volume up confirm NOW THE BOOTLOADER IS UNLOCKED
how to install recovery
duble click recovery bat
press A key to Flash recovery img
again press a akey
switch off the mobile press 10 second power key
now mobile is boot loop
dont worry
open sp tool and flash user data
connect ur mobile Screen blank condition and wait for the process to finish
done
Remove usb cable
Most important
after flash userdata dont power on mobile
press volume up+power
first boot
leave both key showing letv logo
How To root
Start the mobile open twrp folder copy the Superuser.zip file to memory
Go to updater app and select reboot to recovery
select Install select superuser.zip swipe to install
done
Q.I completed the procedure as mentioned in tutorial, everything goes well even sptool download, but when I boot to recovery mode to install supersu the phone boots to stock recovery mode and not the twrp mode. Tried atlest ten times but same problem. How I can boot to twrp mode
Answer .after flash userdata dont power on mobile
press volume up+power first boot
leave both key showing letv logo
Video tutorialhttps://www.youtube.com/watch?v=v9X-a1DmU-g
naeem210 said:
TWRP Recovery & root & bootloop restart
solution LeTV Le1s x507 Indian Version
No more brick and bootloop problem
100%tested solution
New Method added
24/04/2015
Twrp.3.0
Backup all internal storage
install pdanet and preloder driver
https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
http://pdanet.co/a/
Download new Twrp Rar file
https://drive.google.com/file/d/0B5KBP3GG99Q2NUpJSGVhWlB3X1E/view
Extract twrp folder Desktop
Go to mobile settings >> About Phone >>
tap Version 7 Times and hit back
U will have a new option just
above the About Phone option called Developer Options
open it and select USB Debugging
Connect the mobile with pc through USB cable
duble click recovery bat press any key to enter fastboot mode
After it Reboots
close cmd.exe
press shift+right click select open command windows here
Type fastboot oem unlock HIT ENTER
press volume up confirm NOW THE BOOTLOADER IS UNLOCKED
duble click recovery bat
press A key to Flash recovery img
again press a akey
switch off the mobile press 10 second power key
now mobile is boot loop
dont worry
open sp tool and flash user data
connect ur mobile Screen blank condition and wait for the process to finish
done
How To root
Start the mobile open twrp folder copy the Superuser.zip file to memory
Go to updater app and select reboot to recovery
select Install select superuser.zip swipe to install
done
Video tutorial
http://forum.le.com/in/index.php?th...-solution-letv-le1s-x507-new-method-add.1155/
Click to expand...
Click to collapse
Working!! Thanx
Hi , The Sp Tool does not show any progress at all.
I watched the video , connected the phone while it was blank , still SP tool remains stuck in Download forever and the phone keep looping.
Please help thanks
I tied in Windows 10 as well as Windows 7 64bit
csifreeman said:
Hi , The Sp Tool does not show any progress at all.
I watched the video , connected the phone while it was blank , still SP tool remains stuck in Download forever and the phone keep looping.
Please help thanks
I tied in Windows 10 as well as Windows 7 64bit
Click to expand...
Click to collapse
Nevermind, I used the new method you posted , which was x509 and it worked.
Thanks
compatible with Le 1s Eco?
will this method work with LeEco Le 1s Eco version - Le X509 aswell?
Can u give me stock recovery.img please of le eco 1s x509
can install on x501?
strangely i didnt have to flash the user data..maybe because i am in official marshmallow rom
By unlocking bootloader waranty will void?
What is the new method?
csifreeman said:
Nevermind, I used the new method you posted , which was x509 and it worked.
Thanks
Click to expand...
Click to collapse
What is the new method? As my phone is bricked after I used thus now can't do anything, any advice please.
If any one have le 1s related problem and solution or any one want to try new rom or kernal asap then all of u are welcome in our group on telegram so plz join with us
Requriemt
1. Download telegram from play store
2. Just click below link
https://telegram.me/LeSuperGroup
Thanks all of u
otg support or not tell me fast ?????
Twrp
How to install Twrp in letv le1s x507 Android 5.0.2 (Eui 5.5.008S?
Prabhmeet13 said:
How to install Twrp in letv le1s x507 Android 5.0.2 (Eui 5.5.008S?
Click to expand...
Click to collapse
If u want to use custom ROM or Chinese version upgraded version of ROM then u have to upgrade you official ROM version from lollipop to marshmallow (eui 19s) if you don't want to do that and happy with lollipop ROM and stick with it then u have to install kingroot app for rooting mobile ROM
Then install twrp app or fleasify from ply store
Then download twrp version 2.8.6or7 or otherwise 3.0.2
Image file
If you use twrp official app then find with code name x3 (le 1s eco) then application demand u certain permission then do so rest app can do automatically
If u use fleashify then download official twrp image file rename it to recovery. Img. And place such file into ur SD card or internal storage openly (not put such file into any folder )
Rest process can do the app itsalf if you open the app just follow procedure as app demand u
If u have any problem in above process just search in you tube
You can find both app application process
Thanks for read out such long post
sumitgp said:
If u want to use custom ROM or Chinese version upgraded version of ROM then u have to upgrade you official ROM version from lollipop to marshmallow (eui 19s) if you don't want to do that and happy with lollipop ROM and stick with it then u have to install kingroot app for rooting mobile ROM
Then install twrp app or fleasify from ply store
Then download twrp version 2.8.6or7 or otherwise 3.0.2
Image file
If you use twrp official app then find with code name x3 (le 1s eco) then application demand u certain permission then do so rest app can do automatically
If u use fleashify then download official twrp image file rename it to recovery. Img. And place such file into ur SD card or internal storage openly (not put such file into any folder )
Rest process can do the app itsalf if you open the app just follow procedure as app demand u
If u have any problem in above process just search in you tube
You can find both app application process
Thanks for read out such long post
Click to expand...
Click to collapse
when i boot in recovery only show LETV logo and after automatically reboot phone normally i didn't see any recovery in my phone what can i do?
Im not able to flash user data.. actually i unlocked bootloader in my le1s and wen im clicking on boatloder option in twrp it shows device verification failed ur device might work impropely..not able to flash userdata in sp tool option kindly guide me
Sent from my Le X507 using Tapatalk
asif2017 said:
Im not able to flash user data.. actually i unlocked bootloader in my le1s and wen im clicking on boatloder option in twrp it shows device verification failed ur device might work impropely..not able to flash userdata in sp tool option kindly guide me
Click to expand...
Click to collapse
Bro just PM to naneem bro
Just go to 1st page of this trend and click on naeem profile u found PM tab
brom error s_brom_download_da_fail (2004)
nice
Kk
Guide for Install TWRP & Root Moto_C_Plus With Locked Bootloader
I have ported TWRP recovery for Moto C Plus
TWRP porting guide followed on xda [thanks for xda]
Code:
Follow instruction correctly..try at your own risk..i'm not responsible for if your device bricked..
Here is the step by step procedure for install twrp recovery on moto c plus with locked bootloader
Instructions:-The simple way to install twrp recovery on devices,, is to unlock the bootloader..and flash the recovery through fastboot..
I'm going to show you step by step instructions to flash the twrp on moto c plus WITHOUT unlocking the bootloader or lose any data.
1. first thing u need to some files..
Download and extract my ported recovery & files from here Tools NEW G-DRIVE LINK UPDATED!!!
Code:
[I][FONT="Times New Roman"][COLOR="Red"][SIZE="4"]note:[/SIZE][/COLOR][/FONT][/I]after dowloading file..
extract it and copy [I]SuperSU-v2.82-201705271822.zip[/I] file in ur sd card,,,,
DONT FORGET to flash SuperSU-v2.82-201705271822.zip file
after write memory ,,otherwise your device will stuck at
moto logo or soft brick
2.Open download tool(file provided in the above link,use provide sp_flash tool only because moto c plus have secure chip,need to authentication file,, so u cant flash through normal sp_flash tool) and load the download agent "MTK_AllInOne_DA.bin" & authentication file auth_sv5.auth from download_tool folder
3.Load the scatter-file found in the provided file.. select preloader only..but don't flash it.
4. Click Alt + Ctrl + V to activate advanced mode in sp flash tool.
5.Click on "window" up there and select "write mode"
6. Change the Begin address to "0x2d80000" and click on "file path" and choose the TWRP RECOVERY.img from extracted provided zip file
7. Click on "write Memeory", then Power off your device and remove the battery.. press and hold vol- button, then connect phone to pc via USB cable.. press &hold vol- key until pc detect...wait for Write memory ok window appears,, now your recovery is ready.
8.Next insert ur battery, press vol+ and power button simultaneously.. than select recovery mode..& boot into recovery
9.In twrp recovery select install and locate SuperSU-v2.82-201705271822.zip file in ur sd card and flash it..
10.After successful flash... hit reboot device..
!!!NOW YOU ARE ROOTED MOTO C PLUS!!!! Enjoy!!!!:good::good:
...Image Instruction are also available in attached file..
For Compiled twrp go here Compiled Twrp
XDA-DevDB Information
TWRP For Moto C Plus with locked bootloader. Tool/Utility for all devices MT67xx
Contributor:
shr!pad
Created:13-12-2017
Last Update:02-05-2018
If u like my work, hit like button....
In ticked preloader , wut can I choose Broo.. ( TWRP RECOVERY.img ) ,??????
---------- Post added at 11:37 AM ---------- Previous post was at 11:32 AM ----------
Any Mtk Drivers Needed for pc to detact phone ????
u dont need to add twrp recovery in download section..u need to select twrp recovery in write memory...see in attached images..
Yes..u need mtk vcom drivers for detect phone..
I get this error
S_FT_ENABLE_DRAM_FAIL (0xFC0)
[EMI] Enable DRAM Failed!
[HINT] Please check your load matches to your target which is to be downloaded.
check..image instruction.. All files must be loaded..
And check u r enterd beginning adress 0x2d80000 is correct..
See instruction correctly..i think u r problem..in connecting phone...
Read instruction again..said that..press and hold vol- key then connect usb to phone..hold vol- key untill write memory ok window appears..?
Welcome
u dont need to add twrp recovery in download section..u need to select twrp recovery in write memory...see in attached images..
Yes..u need mtk vcom drivers for detect phone..
I double checked evey file and the begin adress, and i remove the battery hold vol - and connect the phone until in the status shows write memory but getting the same error in my 1+16gb
In the note section, u have mention flash SuperSU-v2.82-201705271822.zip file after write memory, this has to be done in the 9th step??
Yes..that to be done in 9th step
Yes..that to be done in 9th step
check that, r u installed vcom drivers correctly....is required for detect u r device..
Bro , TWRP successfully flashed but after flashing TWRP my moto c plus was not booting up strucking on MOTO LOGO ( I again flashed full firmware for use my phone )
Thanks for your work. I'm getting the Dram error as well.
Have double checked all the steps, using supplied cable and tried different ports on the PC.
My device is XT1723. Could it be that this version of TWRP is not correct for my device?
Kindly give proper credit
work on Xt1726 too?
After several unsuccessful attempts on XT1726, this method does not work... But, thank you for your hard work!
u need to flash super su file.. after writing the recovery provided in link.. otherwise u will bricked..read 9th step,,,,it's the problem u have facing
it's correct twrp.. i think ur problem..in drivers,, first install vcom drivers for detect the phone..
yes..thank you.. u need to first install usb vcom drivers for detect phone...
I installed a Pixel Experience (Android 10) on my unlocked Redmi Note 5 India / Redmi 5 Plus (Vince) (Here on I'll refer to the device on Vince). Volte and data didn't work, and the call quality was pretty bad, so I decided to go back to the official MIUI and the Mi recovery.
This guide basically explains the easiest way to go back MIUI. Assuming your phone is unlocked. I'm adding direct download links to MIUI and other Mi tools because they are blocked in India.
Download Links:
Link 1: Normal Update ROM (Zip File)[bigota<dot>d<dot>miui<dot>com/V11.0.2.0.OEGMIXM/miui_HM5PlusGlobal_V11.0.2.0.OEGMIXM_f74369de0c_8.1.zip]
Link 2: Fastboot ROM (tgz File)[bigota<dot>d<dot>miui<dot>com/V11.0.2.0.OEGMIXM/vince_global_images_V11.0.2.0.OEGMIXM_20191108.0000.00_8.1_global_90dd70aa99.tgz]
Link 3: Last Updated Stable ROM(zip file)[update<dot>miui<dot>com/updates/v1/fullromdownload.php?d=vince_global&b=F&r=global&n=]
Link 4: Last Updated Beta ROM(zip file)[update<dot>miui<dot>com/updates/v1/fullromdownload.php?d=vince_global&b=X&r=global&n=]
Link 5: MiFlash(rar file)[cdn<dot>alsgp0<dot>fds<dot>api<dot>mi-img<dot>com/micomm/MiFlash2020-3-14-0.rar]
Link 6: Mi PC Suite(exe file)[bigota<dot>d<dot>miui<dot>com/MiFlash/MiSetup2.2.0.7032_2717.exe]
Link 7: This is not a direct link download twrp from one of the servers a direct link TWRP for Vince(img file) [twrp<dot>me/xiaomi/xiaomiredmi5plus<dot>html]
Link 8: This is not a direct link download Unlock tool from the page MIUI Unlock Tool(zip file) [en<dot>miui<dot>com/unlock/download_en<dot>html]
Link 9: This is not a direct link download Orangefox recovery tool from the page Orangefox Recovery(zip file)[orangefox<dot>download/en/device/vince]
Steps:
1. Download MIUI Unlock tool(Link 8) and extract it. Open cmd prompt inside the folder.
2. Switch your phone to fastboot mode (power + volume down). Connect it to your PC.
3. The device should show up when you enter "fastboot devices" in cmd.
4. Download TWRP (Link 7). extract it, rename it to "twrp.img" copy the image and copy it to the MIUI unlock tool. Now run "fastboot boot twrp.img". This should automatically take you to TWRP.
5. Now wipe everything. If you are not able to mount "data". Go to "Wipe", "Advanced", "Repair" then change the format of the data to exFat, then to FAT then to Ext4. This should mount data.
6. You should see your phone on your PC, if not mount USB in TWRP. Download orangefox recovery from Link 9. Copy it and flash it from twrp. Your phone will restart. Go to recovery mode and you should see orangefox.
7. Download fastboot ROM from Link 2. Unzip it copy "persist.img" from the folder to your phone, flash it using orangefox.
8. Download MiFlash tool from Link 5. Extract it and run it. Select the folder where you extracted fastboot ROM. MAKE SURE THAT THE PATH DOESN'T HAVE ANY SPACES OR FLASHING WILL FAIL. Now hit refresh on flash tool. It will show your device, at the bottom there is a selection where you can select the script to be executed. I generally select flash_all.bat, you can select flash_all_lock.bat for a locked OS.
It might show you "error:Not catch checkpoint (\$fastboot -s .*lock),flash is not done", but your phone will boot properly, it will show a success message only if you choose lock option bat. But this error shouldn't affect the installation.
9. Restart your phone, everything should work properly.
Good luck!
Thank you.
What to do with the link 1 file the ROM file ? Can I directly flash it in twrp ??
thanks bro
That answered all my questions, and i don't know why but all the other mi flash tool found on the web didnt work but this one is just perfect. Thank you so much bro !!! you really simplified my life