Would you RMA this? - OnePlus 3 Questions & Answers

I've noticed that my OP3's display isn't uniform when displaying gray backgrounds (Chrome, no tabs and Spotify) and on the quick settings menu:
http://forum.xda-developers.com/picture.php?albumid=13423&pictureid=53599
http://forum.xda-developers.com/picture.php?albumid=13423&pictureid=53600
Is this something worth returning?

If it is present with night mode off and at all brightness. i would RMA it. In fact I already have applied for replacement for similiar issue. Can you tell me the date of manufacture ? Just curious to understand if it was a bad batch or something like that.

m.abhirup said:
If it is present with night mode off and at all brightness. i would RMA it. In fact I already have applied for replacement for similiar issue. Can you tell me the date of manufacture ? Just curious to understand if it was a bad batch or something like that.
Click to expand...
Click to collapse
Night mode does indeed make it worse. Regardless of brightness, it's always there. Just less noticeable with full brightness. I believe the date was June 21st. How about you?

RMA.
I had a similar issue, sent it back via RMA, got a new device after 8 days. All good now

hasenbein1966 said:
RMA.
I had a similar issue, sent it back via RMA, got a new device after 8 days. All good now
Click to expand...
Click to collapse
So perfect uniformity on all brightness levels on gray screens (especially all tabs closed on Chrome)?
Also, did you purchase directly from OP? If so, what option did you choose to get a new device?

Yes, perfect uniformity.
I purchased directly from OP. Clicked "Service Request" in my Oneplus account, chose "Replacement".

hasenbein1966 said:
Yes, perfect uniformity.
I purchased directly from OP. Clicked "Service Request" in my Oneplus account, chose "Replacement".
Click to expand...
Click to collapse
And the replacement was brand new and sealed?

ceeto said:
And the replacement was brand new and sealed?
Click to expand...
Click to collapse
@ceeto
I did not buy from OnePLus. But in OnePLus forum I know others who got it replaced got a brand new one indeed.

Of course brand new...

hasenbein1966 said:
Of course brand new...
Click to expand...
Click to collapse
Thank you for the information. I think I will opt for a replacement and hope that my current device was just part of a bad batch - others, including yourself seem quite happy with their phone's display.

I have uniformity issues and they are extremely noticeable on grey colors. I read a few posts saying they had issues and the replacement was perfect so I issued an RMA myself. I made a reddit post to get some feedback on the quality of the display on my device.

Himcor said:
I have uniformity issues and they are extremely noticeable on grey colors. I read a few posts saying they had issues and the replacement was perfect so I issued an RMA myself. I made a reddit post to get some feedback on the quality of the display on my device.
Click to expand...
Click to collapse
That requires very little feedback other than that it looks terrible. I hope we receive one each of these illusive phones with no issues.

Related

Repair quote from HTC

Got a quote back from HTC to replace my shattered screen. The price for a new screen is £89. Total cost of my repair which included replacing the damaged back is £169. Ouch!
Get insurance or protection!
sebsal said:
Got a quote back from HTC to replace my shattered screen. The price for a new screen is £89. Total cost of my repair which included replacing the damaged back is £169. Ouch!
Get insurance or protection!
Click to expand...
Click to collapse
How did you get that quote for a damaged screen? I was quoted £200 for the screen alone, other than the glass itself which is shattered it works perfectly.
Hope it won't start flickering in 1 week bro,l that screen replacement is probably from the "vanilla" batch.
If it's actually the screen that is the problem and not some other component....
Garbage phone. Garbage company.
RomNoR said:
Hope it won't start flickering in 1 week bro,l that screen replacement is probably from the "vanilla" batch.
If it's actually the screen that is the problem and not some other component....
Garbage phone. Garbage company.
Click to expand...
Click to collapse
Why are you keeping it if it is a "garbage phone"
ste1164 said:
Why are you keeping it if it is a "garbage phone"
Click to expand...
Click to collapse
Because it cost me 550€?!!
What kind of question is that?!
RomNoR said:
Because it cost me 550€?!!
What kind of question is that?!
Click to expand...
Click to collapse
you could recoup most of that cost on ebay if you are unable to return it for a refund, so a sensible question.
knownuser said:
you could recoup most of that cost on ebay if you are unable to return it for a refund, so a sensible question.
Click to expand...
Click to collapse
That's my last resort.
RomNoR said:
Because it cost me 550€?!!
What kind of question is that?!
Click to expand...
Click to collapse
Why didn't you return it...?
DaveDesire said:
Why didn't you return it...?
Click to expand...
Click to collapse
Because the flicker started about 2 days before the end of the return period.
And i thought it was software related because it started after the update.
RomNoR said:
Because the flicker started about 2 days before the end of the return period.
And i thought it was software related because it started after the update.
Click to expand...
Click to collapse
If it's really an issue -
Warranty
RomNoR said:
Because the flicker started about 2 days before the end of the return period.
And i thought it was software related because it started after the update.
Click to expand...
Click to collapse
Return it under the manufacturers warranty, no point keeping it if you don't get it repaired by them at their expense.
RomNoR said:
Hope it won't start flickering in 1 week bro,l that screen replacement is probably from the "vanilla" batch.
If it's actually the screen that is the problem and not some other component....
Garbage phone. Garbage company.
Click to expand...
Click to collapse
It's not the display, it's either Teg3 physical anomalies or driver issues. Nvidia's drivers and low-level code are proprietary so HTC's dependent on them for a fix. It'll be fixed via updates; it took four on the Asus Prime to alleviate similar issues.
As for "garbage company," the One XL isn't having these issues so HTC's biggest fail was picking Nvidia's Teg3 for the non-LTE One X. It doesn't let them off the hook but I highly doubt they'd have made that choice knowing the issues it was going to create for their customers. Or released a flagship phone that was to be their salvation knowing a percentage were going to have such visible issues. It is odd that it wasn't caught in testing and that none of the professional reviewer's units had it.
As for 169GBP, Samsung charges 200GBP for a screen replacement on the SGS2 so it's not all that bad.
I paid R1300 for a screen replacement for my old SE K800i so screen replacements seem to be a pricey exercise.
Sent from my GT-I9000 using XDA
BarryH_GEG said:
It's not the display, it's either Teg3 physical anomalies or driver issues. Nvidia's drivers and low-level code are proprietary so HTC's dependent on them for a fix. It'll be fixed via updates; it took four on the Asus Prime to alleviate similar issues.
As for "garbage company," the One XL isn't having these issues so HTC's biggest fail was picking Nvidia's Teg3 for the non-LTE One X. It doesn't let them off the hook but I highly doubt they'd have made that choice knowing the issues it was going to create for their customers. Or released a flagship phone that was to be their salvation knowing a percentage were going to have such visible issues. It is odd that it wasn't caught in testing and that none of the professional reviewer's units had it.
As for 169GBP, Samsung charges 200GBP for a screen replacement on the SGS2 so it's not all that bad.
Click to expand...
Click to collapse
and qualcomm for failing to finish their Adreno3x series
sebsal said:
Got a quote back from HTC to replace my shattered screen. The price for a new screen is £89. Total cost of my repair which included replacing the damaged back is £169. Ouch!
Get insurance or protection!
Click to expand...
Click to collapse
And you could choose the screen you want? Acer or Sharp?
Didn't get a choice of screen, just a quotation breakdown. Screen totally shattered. They actually quoted £89 for that before VAT. £20 for labour. Also changing the back of the phone as it was scraped and the camera lens was damaged.
The £169 was for all that and the courier collection and return
sebsal said:
Didn't get a choice of screen, just a quotation breakdown. Screen totally shattered. They actually quoted £89 for that before VAT. £20 for labour. Also changing the back of the phone as it was scraped and the camera lens was damaged.
The £169 was for all that and the courier collection and return
Click to expand...
Click to collapse
So basically, it it were a car, you totaled it.
phil112345 said:
How did you get that quote for a damaged screen? I was quoted £200 for the screen alone, other than the glass itself which is shattered it works perfectly.
Click to expand...
Click to collapse
HTC don't quote until they see your phone. That's what they quoted me after they assessed it
myself11 said:
And you could choose the screen you want? Acer or Sharp?
Click to expand...
Click to collapse
Is there an easy way to see which screen i have?
Thanks
Sent from my HTC One X via Tapatalk 2
myself11 said:
And you could choose the screen you want? Acer or Sharp?
Click to expand...
Click to collapse
Why is so many people saying "Acer or Sharp"? We don't know which companies made the screens for one x? Just because it was those two for Sensation doesn't mean One X has the same. Wasn't there a test before the phone came out that comfirmed IPS, and at the same time they said it was a samsung panel? (most likely the warmer one) and then I would guess that the other one is a LG. I believe this mostly becuase I know they are known for colder (and more color-correct) dispays and they acutally make 4.7" 720p ips-panels and also because the viewing angels are less good on the colder one, just like LG's usually are. But I don't know, no point in guessing. This just seem most logical, since I haven't even seen acer or sharp ips-panel in this size, in any resolution.
DanteGR said:
Is there an easy way to see which screen i have?
Thanks
Sent from my HTC One X via Tapatalk 2
Click to expand...
Click to collapse
Yeah, you could "adb pull /proc/last_kmsg kmsg.txt" and in there it should say "panel_id=". All I know is "0x294000f" is the warm one (Samsung?) and "0x4940014" is the cold one (LG?).

Black Friday Deals

curious to see if anyone knows if retailers like Best Buy will offer the Moto 360 on their Black Friday deal list?
I just picked up mine at Best buy via open box item ($217), and I have 14 days to return it. Given that this is a new hot item, I'm not anticipating very much of discount in savings if made available on Black Friday - retail is still $250 at both best buy and Moto's website.
bump on this
I bought an Open Box 360 at Best Buy this past weekend for $205 but I have until Jan 15 to return it because of their holiday return policy....you may want to look into that....I doubt it will go much lower than that. What i might do is see if the Gear S drops a lot so I can have both LOL!
The best I can find is buying Target gift cards on black friday at 10% off, then waiting until Saturday the 29th to buy the 360 from their website at effectively 10%off. it would be 224 before taxes
mikespe said:
I bought an Open Box 360 at Best Buy this past weekend for $205 but I have until Jan 15 to return it because of their holiday return policy....you may want to look into that....I doubt it will go much lower than that. What i might do is see if the Gear S drops a lot so I can have both LOL!
Click to expand...
Click to collapse
The Jan15 return policy will only give you store credit in case you return the watch and not a refund.
metaldood said:
The Jan15 return policy will only give you store credit in case you return the watch and not a refund.
Click to expand...
Click to collapse
That's fine since if I return it I will get either the ZenWatch or Gear S...but so far I am liking the 360...the only real issue is trying to find a good and safe metal band that won't break the bank
mikespe said:
That's fine since if I return it I will get either the ZenWatch or Gear S...but so far I am liking the 360...the only real issue is trying to find a good and safe metal band that won't break the bank
Click to expand...
Click to collapse
That's a good idea . By that time more detailed zenwatch reviews will be out.
metaldood said:
That's a good idea . By that time more detailed zenwatch reviews will be out.
Click to expand...
Click to collapse
Android Authority has already done there review but I'm waiting for some "real world" reviews and also from Lisa at MobileTech Reviews. She always does an outstanding & objective review...
mikespe said:
Android Authority has already done there review but I'm waiting for some "real world" reviews and also from Lisa at MobileTech Reviews. She always does an outstanding & objective review...
Click to expand...
Click to collapse
Yup. Couple of things I am interested in terms of long term usage is 1) Amoled burn-in (some LG GWAR users reporting burn-in) 2) charger pin problems like rusting/loose contact (That happened to original LG G watch)
metaldood said:
Yup. Couple of things I am interested in terms of long term usage is 1) Amoled burn-in (some LG GWAR users reporting burn-in) 2) charger pin problems like rusting/loose contact (That happened to original LG G watch)
Click to expand...
Click to collapse
Actually there are reports of burn in with the 360 too...
mikespe said:
Actually there are reports of burn in with the 360 too...
Click to expand...
Click to collapse
That's only after keeping them on charger overnight with the screen on? I turn my screen off while it's charging. Then remove it after charging is done.
i like this

HTC10 Screen Problem.Is this hardware or software related?

Hey guys.I'm new here and I'm a HTC10 user for the first time.Before this phone I used LG Nexus4 and P970.
I'm loving this device so far.The device is with me for 7-8 months.But last month it snowed here in Turkey and I was on my way to basketball match at night in the Arena.I saw this issue for first time at that night.Thought it's about cold weather(because it's metal body?).BTW I've got a Spigen's 2 pieced case.
Also this device has been already RMAd once because of screen popped out(glue was not strong enough I guess).
But this month I'm seeing it almost everyday.When I touch screen with a little pressure it's going away for a second and comes back or not(it's just random sometimes).Sometimes I can't even take photo because of randomness of this issue.Also there's a little white dot in the bottom right corner of screen.It appears at white backgrounds and it's brighter than other areas.This is also an issue for me.
Tomorrow I'll RMA my phone to local service in here.
Just wanted to let you guys now about this and ask what it is all about?
It was my first subject in the forums.So sorry if I'm on the wrong place and sorry about my english.It's just not that good
Here's the album for images.I can't add images to forum yet.Please put "." instead of "*"
---imgur*com/a/9qVSe---
It has a lot of display problem. HTC 10 is flawed
Today I got the call from repair service.They said my device is repaired.Here's what's changed:
-Motherboard(New IMEI)
-Cpu (Dunno why)
-Lcd screen (From Sharp to Tianma)
Everything is perfect for now.Happy to get back on my musics with this phone and Hd598Cs. :highfive:
There's one thing I noticed because I used both LCD screens from Sharp and Tianma.
Sharp had a shadows(kinda look like it) on the side of panel.And Tianma has a yellow tint at bottom side of screen.Some guys said that It's glue and will go in time
burakksglu said:
Hey guys.I'm new here and I'm a HTC10 user for the first time.Before this phone I used LG Nexus4 and P970.
I'm loving this device so far.The device is with me for 7-8 months.But last month it snowed here in Turkey and I was on my way to basketball match at night in the Arena.I saw this issue for first time at that night.Thought it's about cold weather(because it's metal body?).BTW I've got a Spigen's 2 pieced case.
Also this device has been already RMAd once because of screen popped out(glue was not strong enough I guess).
But this month I'm seeing it almost everyday.When I touch screen with a little pressure it's going away for a second and comes back or not(it's just random sometimes).Sometimes I can't even take photo because of randomness of this issue.Also there's a little white dot in the bottom right corner of screen.It appears at white backgrounds and it's brighter than other areas.This is also an issue for me.
Tomorrow I'll RMA my phone to local service in here.
Just wanted to let you guys now about this and ask what it is all about?
It was my first subject in the forums.So sorry if I'm on the wrong place and sorry about my english.It's just not that good
Here's the album for images.I can't add images to forum yet.Please put "." instead of "*"
---imgur*com/a/9qVSe---
Click to expand...
Click to collapse
Sounds like they've repaired it rather than swap it out. A like for like would have been the best outcome for yourself.
dladz said:
Sounds like they've repaired it rather than swap it out. A like for like would have been the best outcome for yourself.
Click to expand...
Click to collapse
Yeah I'm happy with the way of solution.
Because someguy in here(Turkey),got a swap report and waited for a new device about 3 months.Because our services gather all devices in together once in month and at that time there was no swap unit for the guy.So he just waited,waited and waited...
But here's the thing,if you're going to change mobo,cpu and LCD;why don't you just swap? Only things that aren't repaired probably the camera,speakers,antennas etc.
burakksglu said:
Yeah I'm happy with the way of solution.
Because someguy in here(Turkey),got a swap report and waited for a new device about 3 months.Because our services gather all devices in together once in month and at that time there was no swap unit for the guy.So he just waited,waited and waited...
But here's the thing,if you're going to change mobo,cpu and LCD;why don't you just swap? Only things that aren't repaired probably the camera,speakers,antennas etc.
Click to expand...
Click to collapse
They look at the units creation date if it's BER then they'll swap it.
dladz said:
They look at the units creation date if it's BER then they'll swap it.
Click to expand...
Click to collapse
It's FA65 Series.So it's probably May production.
burakksglu said:
It's FA65 Series.So it's probably May production.
Click to expand...
Click to collapse
Released in April, I got mine on release day, could be a faulty batch. As you can't really communicate with htc directly (as in the tech who'll be looking at the phone) you have very little sway over what they do next.
It'd be interesting to see if they share notes with each other based on your case file, perhaps talking with them directly they can agree that a like for like replacement would be the most viable option moving forward. If not I'd say insurance would be the only other option, besides third party but at this point a patch up wouldn't fill me with confidence.
Sorry mate, not a lot more I can think of.
---------- Post added at 12:36 AM ---------- Previous post was at 12:36 AM ----------
burakksglu said:
It's FA65 Series.So it's probably May production.
Click to expand...
Click to collapse
Any idea how I could identify mine?
Nvm, mine is a sharp.
You can identify it with the Dev check app. Not sure if that's what you already used.
dladz said:
Released in April, I got mine on release day, could be a faulty batch. As you can't really communicate with htc directly (as in the tech who'll be looking at the phone) you have very little sway over what they do next.
It'd be interesting to see if they share notes with each other based on your case file, perhaps talking with them directly they can agree that a like for like replacement would be the most viable option moving forward. If not I'd say insurance would be the only other option, besides third party but at this point a patch up wouldn't fill me with confidence.
Sorry mate, not a lot more I can think of.
---------- Post added at 12:36 AM ---------- Previous post was at 12:36 AM ----------
Any idea how I could identify mine?
Nvm, mine is a sharp.
You can identify it with the Dev check app. Not sure if that's what you already used.
Click to expand...
Click to collapse
Yeah that's how I checked my screen.If you ask about serial number it was on the box or in the box.There was a sticker on my box when I bought.
And btw I got my phone back from repair last week.They repaired it quick,about 3 days.There's no problem but the yellow tint at bottom of screen.It's a common issue with Tianma,at least people say so.
burakksglu said:
Yeah that's how I checked my screen.If you ask about serial number it was on the box or in the box.There was a sticker on my box when I bought.
And btw I got my phone back from repair last week.They repaired it quick,about 3 days.There's no problem but the yellow tint at bottom of screen.It's a common issue with Tianma,at least people say so.
Click to expand...
Click to collapse
This the third? And theres a yellow tint? Sweet jesus you've not had much luck have you?
Sorry mate, but if that were me i'd be sending it back and asking for a new one, I'd cause hell over the phone with them. I'd make sure that the repair guys who are physically going to touch my device got the memo.
Really bad.
dladz said:
This the third? And theres a yellow tint? Sweet jesus you've not had much luck have you?
Sorry mate, but if that were me i'd be sending it back and asking for a new one, I'd cause hell over the phone with them. I'd make sure that the repair guys who are physically going to touch my device got the memo.
Really bad.
Click to expand...
Click to collapse
Well there's difference between UK Customer Services or HTC UK and HTC Turkey.For example: HTC Turkey says "You can replace it or get a reserve phone while yours is getting repaired,bla bla. But services say they'll give it to you if yours is not repaired after 10 work-days.Also HTC Turkey is not good at marketing,production or customer services.Some guys waited 3-6 months for replacement unit.
I'm using the same device but first time screen popped out from bottom left and changed.Also back button light was very dim than the other one.Then there was this screen problems at imgur album appeared,showed line like artifacts and white dot at bottom right(That's white dot is also common in a lot of users).Screen,mobo and CPU changed but still with the same metal body(I know it because there's a tiny dent at the body).
burakksglu said:
Well there's difference between UK Customer Services or HTC UK and HTC Turkey.For example: HTC Turkey says "You can replace it or get a reserve phone while yours is getting repaired,bla bla. But services say they'll give it to you if yours is not repaired after 10 work-days.Also HTC Turkey is not good at marketing,production or customer services.Some guys waited 3-6 months for replacement unit.
I'm using the same device but first time screen popped out from bottom left and changed.Also back button light was very dim than the other one.Then there was this screen problems at imgur album appeared,showed line like artifacts and white dot at bottom right(That's white dot is also common in a lot of users).Screen,mobo and CPU changed but still with the same metal body(I know it because there's a tiny dent at the body).
Click to expand...
Click to collapse
Appreciate different regions may have different levels of customer service, even though I strongly disagree with this.
Perhaps a complain to htc global? Explaining your predicament?
I'm not sure mate,

How to install 1920x1200 display on 1280x800 tablet?

Hello XDA Forum,
my daughter's tablet screen was cracked. A Chinese web shop offered replacement screen (lcd, digitizer & glass combo) and I ordered giving them correct model of the tablet. Now, I received physically perfectly fitting gear but I won't get any image on the screen. I can see backlight lit for a short while.
I swapped the faulty LCD/digitizer/glass back and could see picture just perfectly. So it seems like resolution issue. I even swapped the new LCD back while tablet was powered up (I know, I know..) and I could see picture in the replacement screen as well! But the image was distorted just like you've seen in CRTs when resolution/refresh don't match the screen capabilities.
Tablets model is Asus ZenPad 10 Z301M-1B006A. This site explains the differences pretty well:
w w w . p d e v i c e . c o m
/comparison/asus-zenpad-10-z301m-vs-asus-zenpad-10-z301mf
Even the GPU is same for 1920*1200 and 1280*800 system.
Actual replacement LCD is NV101WUM-N52 (1920*1200).
It perhaps should have been TV101WXM-NU1 (1280*800).
I saw some web shops giving possibility to select resolution but my Chinese web shop just asked the model. I have perfectly correct model in the order.
The sticker on the replacement panel says ATAB435 and "Asus Z301M Z301MFL" plus some Chinese chars. This suggests the LCD was indeed intended for Z301M/1280*800 tablet.
Now, the question is, could my replacement screen picture problem be due to wrong initial Android bootup resolution setting which I could possibly change with adb thus upgrade the tablet to 1920*1200 reso?
Hope this question made any sense at all.
BR,
Timo
karhulitos said:
Hello XDA Forum, my daughter's tablet screen was cracked..........
Click to expand...
Click to collapse
I don't have this device myself but, I did a little digging around...
First of all, I did see that the new display is actually compatible for your device.
If this were me, my next thought would be to go to the following manufacturers website FAQ section...
https://www.asus.com/us/Tablets/ASUS-ZenPad-10-Z301M/HelpDesk_Knowledge/
... and see if I can locate anything that's regarding the Display (ie... LCD, Digitizer, Display, etc...) to see if there was anything that may/might/does apply to your issue.
Personally stating, I can only assume that it may be tied to some type of Calibration or similar.
Just to clarify, if this were me, and nothing worked, I would just double check all the connections. Specifically for connections that may be loose, dirty, disconnected (by accident), etc... because things can happen when putting them together that was overseen/forgotten accidentally.
In addition, I would look at some YouTube videos in replacing the Digitizer Display for the same/similar device. I would do this only as a reference regarding what I did and see if I had overlooked anything.
If all is well and nothing was successful, I would personally feel that this Digitizer was simply defective. I would then look to begin the process of returning/replacing the Digitizer.
If I obtained the same Digitizer part, and the same happened, I would just look into return/exchange that one for the other part.
It's really hard to diagnose many items/issues without having the actual/same device.
I hope that this was helpful in some way and I had explained this okay via text.
I do wish you the best of luck!
~~~~~~~~~~~~~~~
Unless asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my Apple Macintosh.
Ibuprophen said:
First of all, I did see that the new display is actually compatible for your device.
Click to expand...
Click to collapse
First of all, your effort is highly appreciated. Thank you.
Very interesting. What made you think my replacement display combo (LCD: NV101WUM-N52) is compatible with Z301M? All hints I could gather was stating it's compatible for Z301MF* models.
I tried to look for this information but couldn't really find the proof.
Ibuprophen said:
Personally stating, I can only assume that it may be tied to some type of Calibration or similar.
Click to expand...
Click to collapse
This is my study hypothesis as well. First, I was thinking that my problem is just due to the LCD not understanding the signal sent to it by the GPU.
commands like:
Code:
adb shell
wm density DPI (Change display density)
wm size RES (Change display resolution)
might change the startup resolution so that the new LCD can show it and otherwise get initialized properly.
I was just puzzled that Google didn't give any hits of people doing this so I just couldn't believe I'm the 1st one to experience this. This is why decided to ask here.
What I do not know is can ARM or tablet hardware in general negotiate screen refresh/resolution/DPI information via the cable or is it always something which is hard coded in the firmware itself? After all a tablet isn't really a plug and play hot swap equipment, eh?
Only thing avoiding me to test above approach is that the web shop may want to replace my new LCD. Let's see how it boils. Is it broken or is it electrically unfit for the hw/sw model I have?
Ibuprophen said:
Just to clarify, if this were me, and nothing worked, I would just double check all the connections. Specifically for connections that may be loose, dirty, disconnected (by accident), etc... because things can happen when putting them together that was overseen/forgotten accidentally.
Click to expand...
Click to collapse
I hear you. I did this approximately 10 times. Some 5 times I switched back to the cracked 1280*800 and shows the picture fine. Back to NV101WUM-N52 and all I get get is backlight.
Ibuprophen said:
It's really hard to diagnose many items/issues without having the actual/same device.
Click to expand...
Click to collapse
Jep. I think I just need to send it back to China. But please come back to me and tell how did you come to conclusion the screen is fit for Z301M?
karhulitos said:
......... I think I just need to send it back to China. But please come back to me and tell how did you come to conclusion the screen is fit for Z301M?
Click to expand...
Click to collapse
I've seen that part number for your device within some other websites like Amazon, eBay and even Asus as a replacement part option.
I've seen this before. Sometimes a new device will have upgrade options when it's first launched.
I've got an Asus Transformer T100TA Tablet where this option was provided for the Digitizer, Memory and a few others.
As a matter of fact... I've got my Asus Tablet still apart with the newer Digitizer Display ready to be put back together. Unfortunately it's been ready to be assembled for approximately a year now (shame on me... LOL! ).
~~~~~~~~~~~~~~~
Unless asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX1 Forum App on my Apple Macintosh.
Ibuprophen said:
Unfortunately it's been ready to be assembled for approximately a year now (shame on me... LOL! ).
Click to expand...
Click to collapse
Pull yourself together and do it now! Thanks man for your insights.
BR,
Timo
karhulitos said:
Pull yourself together and do it now! .........
Click to expand...
Click to collapse
LMAO!!!
It's actually my first (and only) tablet I've ever owned. It's like a BIG Android... LOL!
I've got a good handful of various Android devices, 3 Laptops and 2 PC Towers (with 3 monitors). This list only includes what's actually working (also less the various parts as well). On top of the various projects I'm involved in bouncing from one to another as well as Life itself.
You can see why reassembling the tablet is actually something I want/need to do, it's just not very high on my priority list at this point in time.
I wish you the best of luck!
~~~~~~~~~~~~~~~
Unless asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX1 Forum App on my Apple Macintosh.
Ibuprophen said:
LMAO!!!
I wish you the best of luck!
Click to expand...
Click to collapse
Thank you.
One last detail for the record should someone else sometime stumble upon this problem.
Z301M original LCD is KD101N59-42NA-A8 which was later replaced, according to test report 081-170425-200, by TV101WXM-NU1 1280*800.
So be careful when ordering replacement screen for Asus ZenPad 10. There is also some green & yellow connector difference which wasn't involved in this case but I just wanted to mention it here.

New Batch without the Greent Tint Issue?

As I am on my second replacement device (all three manufacturing date 29.10.19) and since I heard from someone that OP pushes a new batch at the end of the year without (hopefully) the green tint, I am wondering of someone purchased a OP7T recently and can confirm, that there is in fact no (or less) green tint?
xflowy said:
As I am on my second replacement device (all three manufacturing date 29.10.19) and since I heard from someone that OP pushes a new batch at the end of the year without (hopefully) the green tint, I am wondering of someone purchased a OP7T recently and can confirm, that there is in fact no (or less) green tint?
Click to expand...
Click to collapse
I can confirm that i don't have this issue for the batch 07.11.2019
HD1900
xflowy said:
As I am on my second replacement device (all three manufacturing date 29.10.19) and since I heard from someone that OP pushes a new batch at the end of the year without (hopefully) the green tint, I am wondering of someone purchased a OP7T recently and can confirm, that there is in fact no (or less) green tint?
Click to expand...
Click to collapse
I dont notice any green tint.. EDIT - I have 10-17-2019 listed on the box.
It's pretty much confirmed that it's a lottery if you get the green tint effect. I wouldn't trust any batch since mine is made 04.10.2019 and I have tried everything to reproduce the green tint I've seen others experience to no avail. Many other phones with OLED displays have this problem at random. Anyway I hope I'm wrong and that you get a good sample, just my two cents.
xflowy said:
As I am on my second replacement device (all three manufacturing date 29.10.19) and since I heard from someone that OP pushes a new batch at the end of the year without (hopefully) the green tint, I am wondering of someone purchased a OP7T recently and can confirm, that there is in fact no (or less) green tint?
Click to expand...
Click to collapse
I have this issue. 2019.12.02. Blue 256/8. Look at attachments.
Imgur mirror: https://imgur.com/a/yu5joHO
Mines good 7t 256gb silver 2019.11.07
I sent back mine. Never ever this shiet again.
EugenStanis said:
I sent back mine. Never ever this shiet again.
Click to expand...
Click to collapse
Whaaaat
surdustef said:
Whaaaat
Click to expand...
Click to collapse
Unacceptable situation for every kind of consument. I know the characteristics of oled screens, however in this scenario it looks so bad
No problems here: 7T 2019.10.10

Categories

Resources