Related
Most noteworthy edits include LTE only mode, LTE/CDMA mode(no 3G) and NV BACKUP/RESTORE. Nice little all-in-one shortcut for most of the hidden menus on this device.
If there is another thread on this in the Sprint Galaxy S III forums I apologize. Just going to outline this menu which is found on stock Sprint GS3 Touchwiz roms.
Getting Started
You can use Any Cut, Better Cut, Nova Launcher etc etc to make a shortcut to this menu.
1. Better Cut > New ShortCut > No > All Activities > IOTHiddenMenu(first one listed).
2. Any Cut > ?
3. Nova Launcher > Long press on home screen > Shortcuts > Activities > Scroll to IOTHiddenMenu and click it to expand > Scroll down to the first IOTHiddenMenu in that list(under GPSCLRX)
Now we can open our new shortcut and you should see the following screen...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
USBSetting Menu
This menu switches the phone's USB mode when connected to a computer.
MTP (Media Transfer Protocol; device shows up as USB drive)
MTP + ADB (default setting; should be self-explanatory)
PTP (Picture Transfer Protocol; device shows up as camera)
PTP + ADB (should be self-explanatory)
RMNET + DM + MODEM (RMNet = USB virtual Ethernet framework; DM = Diagnostic Mode; Modem = self-explanatory)
DM + MODEM + ADB (self-explanatory) (best setting when using QPST/QXDM/etc)
LTE Mode Menu
I do not have LTE in my area yet. Could anyone detail what some of the options below do exactly? I'm sure one is for LTE only.
TestMode Menu > CDMA > COMMON > NEXT PAGE > NEXT PAGE > PREF MODE SET may be the better alternative to this.
LTE Service Forced
Enable LTE Mode
Enable GLOBAL Mode
Enable CDMA Mode (default)
TestMode Menu
1. UMTS
UMTS > COMMON > NV REBUILD (NV REBUILD, NV BACKUP, NV RESTORE)
Everything else under UMTS either doesn't work.. or isn't worth messing with.
2. CDMA
CDMA > COMMON > NEXT PAGE > NEXT PAGE > PREF MODE SET (CDMA/EVDO/LTE, GSM/WCDMA, LTE ONLY, CDMA/LTE, CDMA ONLY, EVDO ONLY)
Everything else under CDMA either doesn't work.. or isn't worth messing with.
3. LTE
Nothing of interest.. just displays LTE debug status.
4. SIM
SIM > CHECK NV (Helps identify possible incorrect settings. Displays current PREF MODE. NV should be set under RTRE Config.)
Not worth messing with anything else in here.
5. run EFS SYNC()
Doesn't do anything.
There are lots of other options in here to mess with but most are broken, not supported or just really not worth messing with. All the MSL settings for example... no matter what.. I can't seem to read/write a new MSL via Test Mode. CDMA > CONTROL > MSL Edit has broken my MSL. *Update* Fixed MSL. I also messed up my EFS playing with the wrong stuff. I was able to recover.. but BE CAREFUL!!
##DATA# Menu
Same menu as hitting ##DATA# on dialer.
View
Data Profile - view current data profile
EVDO - view DDTM setting
Advanced - view MEID, Vocoder, Slotted Index, ACCOLC etc
USB Charging - view USB Charging setting
eHRPD - view eHRPD setting
PRL Write - Write new PRL with this option. PRL you are writing must be in root of storage and named test.prl
NAM Block - ??? can anyone explain this?
Others - view multimedia proxy values(Browser, MMSC, DSS)
Edit
Data Profile - edit data profile
EVDO - enable/disable DDTM
Advanced - edit Vocoder, Slotted Index, ACCOLC etc
USB Charging - enable/disable USB Charging
eHRPD - enable/disable eHRPD
Others
Browser - edit browser gateway ip/port/secure port
MMSC URL - edit MMS url
DSS - edit DSS server
Multimedia - edit RTSP and HTTPPD proxy settings
RC Data -
HDR/1X Selection - sets data mode... hybrid, cdma only, evdo only etc..
Voice Privacy - enable/disable voice privacy (disabled by default)
DTMF Set - set short/long DTMF
Toggle NAI - enable/disable NAI (enabled by default)
Korea Mode Set - don't mess with this
LTE APN Settings - set LTE APN
Dial Up Networking - enable/disable Dial Up Networking (off by default)
##MSL# Menu
View - view current phone number/msid set.
Edit - write new phone number/msid
##DEBUG# Menu
Various data debug menus. Nothing new here.
##Phone Util# Menu
UART pda/modem settings. This isn't really needed.
##RTN# Menu
Nothing new here. Same as ##786# dialer code. View phone information for perform a full reset on your device. This wipes /data and /internal memory as well as wiping all OTA provision settings.
Dialer Codes
Code:
##CLEAR# - Reset phone's network settings
##DSA# - DSSOption
##GPSCLRX# - Clear GPS Data
##LOG# - SysDump
##RTN# - RTN Menu (View/Reset)
##SCRTN# - Force OTA reprovisioning
##TTY# - TTY Test Mode
##DEBUG# - Debug Menu - 777468 (1x Eng, 1x Eng Protocol, EVDO Eng RF, EVDO Eng Protocol, LTE Eng, Configuration, Bluetooth, Data Status, eHRPD Eng, Others)
##DATA# - Data Menu (View/Edit)
*#06# - Display MSL
*#22558463# - Total Call Time Reset
*#232331# - Bluetooth RF Field Test
*#1111# - Read FTA SW Version
*#2222# - Read FTA HW Version
*#0228# - Battery Status
*#7284# - Phone Util
autoprime said:
##DEBUG# Menu
Various data debug menus. Nothing new here.
Click to expand...
Click to collapse
The ##DEBUG# Menu includes the LTE Engineering information screen, which is the only place to find the proper signal strength (RSRP) and signal quality (RSRQ) of a live LTE connection.
I was playing with that and tried Korea mode think it would put the phone in Korean
Disappointingly it didn't now I can't connect to sprint 3g
Some one help
Sent from my SPH-L710 using xda premium
Edit: oh god I should have read the op
He said not to mess with it oh noooo
It seems like my username has been erased
How do I undo it
To undo it I need to know it first how do I learn it
Sent from my SPH-L710 using xda premium
gtuansdiamm said:
It seems like my username has been erased
How do I undo it
To undo it I need to know it first how do I learn it
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
If you have your MSL, you can ##3282#, edit, enter MSL and manually input your [email protected]...
Sent from my SPH-L710
gtuansdiamm said:
It seems like my username has been erased
How do I undo it
To undo it I need to know it first how do I learn it
Click to expand...
Click to collapse
run your NV RESTORE... TestMode > UMTS > COMMON > NV REBUILD > NV RESTORE. Make sure you hit the RESTORE setting and not Rebuild/Backup. The last thing you want to do is create a backup of bad nv settings(such as nv settings all being set for Korea mode). After you hit RESTORE the phone should reboot within a few seconds... wait it out. Your phone should now be unprovisioned... so it should try to OTA and that's that. If for some reason the "sktelecom" settings are still set... try running NV RESTORE one more time. If it STILL isn't fixed after that.. let me know. There are a few things we can do. Last night I messed my NV and EFS up pretty bad(sorta on purpose lol) but I was able to recover from everything. Even Korea mode.
Thanks man it worked perfectly
I tried updating profile and it did restore my username but not my 3g
You saved me a whole lot of time talking to sprint customer service bots
Sent from my SPH-L710 using xda premium
Auto
prime glad to see you have this phone. I follow your work on previous phones
I'm getting mine in a few days.
Question:
How do I backup NV? Where does it back up the items to? Internal memory?
Is it the same as backing up. NV 1192, 465, 466, and 1194?
trim81 said:
Auto
prime glad to see you have this phone. I follow your work on previous phones
I'm getting mine in a few days.
Question:
How do I backup NV? Where does it back up the items to? Internal memory?
Is it the same as backing up. NV 1192, 465, 466, and 1194?
Click to expand...
Click to collapse
hmm good question. to be honest im not sure where it backs up the files. pretty sure theyd still be in NV somewhere.
what you should do is connect gs3 to qxdm.. send 16-digit pass(same as epic/e4gt/etc).. then close qxdm and open up QPST EFS Explorer. All NV items will be unlocked in NVM > NUM. i think thats the folder anyway.. doing this all from memory. but ya... 1192 etc will now be viewable in EFS EXP when you send pw in QXDM first. No more "denied access" in CDMA WS
@auto
Have you figured out LTE is simply a MAC ID authentication?
Can we change LTE Macs and be connected like WIMAX?
Was going to do this as well
But the first 2 posts after the op's were my exact motivation in changing my mind. I had a feeling people would b ****n there **** up playin in it lol. Nevertheless, nice job OP, looks sharp. Well detailed too
anyone know where the settings are for MMS?
I'm trying to figure out how to send MMS on MetroPCS. on the Evo's I used a APN method, but apparently ICS doesn't allow 3rd party apps to write to APN. so I'm trying to enter the values manually. got into the DATA menu, entered a couple of the values, but a few other other values from that APN file are nowhere to be found in the DATA menu...and QPST refuses to see my phone?
any info on this would be great!
USCC
autoprime I have a USCC phone and have had no luck backing up the IMEI using the conventional QPST method. I have been searching Sprints info because some have had a similar problem.
When I try QPST it stops at 16% and says: "Roaming Lists could not be read".
Tried multiple times no luck.
I made a short cut to my hidden menus and everything looks to be the same as the OP.
My IMEI is currently fine.
That being the case is there a way to make a good backup now and restore it if things go bad? If this is possible can the backup be accessed and stored on a pc?
My goal is to find a way to back up the IMEI for myself and other USCC sg3 users. Any help would be very appreciated.
Mod57 said:
autoprime I have a USCC phone and have had no luck backing up the IMEI using the conventional QPST method. I have been searching Sprints info because some have had a similar problem.
When I try QPST it stops at 16% and says: "Roaming Lists could not be read".
Tried multiple times no luck.
Click to expand...
Click to collapse
Which QPST program exactly is giving you this error? Also, random question for you... do the USCC Samsung devices have a 16 digit password that's used in QXDM? All Verizon Samsung's share the same password.. all Sprint Samsung's share the same password. You guys are kinda similar to Verizon's right.. same radio and all? so you know if 2010031619780721 works? Do you have QXDM or CDMA WS installed? Need to be able to send that password to the phone to fully unlock. then we'll work on backing up IMEI.
Mod57 said:
That being the case is there a way to make a good backup now and restore it if things go bad? If this is possible can the backup be accessed and stored on a pc?
Click to expand...
Click to collapse
Are you referring to the NV RESTORE TestMode options? If so, I know of no current method to save that backup to a PC.
The TestMode NV RESTORE option should be pretty solid... if your phone boots.. you should be able to get to that menu. Same would be needed to get to QPST(booting phone).
So get back to me on which QPST app you're trying.. and what exactly is giving you the error... as well as any info on a 16 digit QXDM password.
Hey autoprime, i changed the korea mode on my phone before ever reading your warning. I have no data connection unless im on WiFi. Is it related to my change, if so do you or anyone have any idea how to fix it. Please. Im on freezas jelly bean leak lih
PUNCHYS said:
Hey autoprime, i changed the korea mode on my phone before ever reading your warning. I have no data connection unless im on WiFi. Is it related to my change, if so do you or anyone have any idea how to fix it. Please. Im on freezas jelly bean leak lih
Click to expand...
Click to collapse
sorry for the delay in response. i assume you got this fixed?
Post #6 on the first page of this thread has a fix if you messed with korea mode. you may need to go back to ICS for this instead of Jellybean.
ATT: NAM BLOCK;
the Mobile Object Model (MOM) can be categorized as PRL and NAM, with the NAM blocks existing as several different types. For example, the MDN NAM block holds the directory number for calling the mobile. The CDMA NAM block holds parameters used when the mobile is operating in the PCS spectrum. The Dual Mode NAM block holds parameters used by a PCS or CDMA mobile while it is being used in the CDMA/analog spectrum. The IMSI_T block holds the true IMSI of the mobile station
hope this helps.
autoprime said:
Most noteworthy edits include LTE only mode, LTE/CDMA mode(no 3G) and NV BACKUP/RESTORE. Nice little all-in-one shortcut for most of the hidden menus on this device.
If there is another thread on this in the Sprint Galaxy S III forums I apologize. Just going to outline this menu which is found on stock Sprint GS3 Touchwiz roms.
Getting Started
You can use Any Cut, Better Cut, Nova Launcher etc etc to make a shortcut to this menu.
1. Better Cut > New ShortCut > No > All Activities > IOTHiddenMenu(first one listed).
2. Any Cut > ?
3. Nova Launcher > Long press on home screen > Shortcuts > Activities > Scroll to IOTHiddenMenu and click it to expand > Scroll down to the first IOTHiddenMenu in that list(under GPSCLRX)
Now we can open our new shortcut and you should see the following screen...
USBSetting Menu
This menu switches the phone's USB mode when connected to a computer.
MTP (Media Transfer Protocol; device shows up as USB drive)
MTP + ADB (default setting; should be self-explanatory)
PTP (Picture Transfer Protocol; device shows up as camera)
PTP + ADB (should be self-explanatory)
RMNET + DM + MODEM (RMNet = USB virtual Ethernet framework; DM = Diagnostic Mode; Modem = self-explanatory)
DM + MODEM + ADB (self-explanatory) (best setting when using QPST/QXDM/etc)
LTE Mode Menu
I do not have LTE in my area yet. Could anyone detail what some of the options below do exactly? I'm sure one is for LTE only.
TestMode Menu > CDMA > COMMON > NEXT PAGE > NEXT PAGE > PREF MODE SET may be the better alternative to this.
LTE Service Forced
Enable LTE Mode
Enable GLOBAL Mode
Enable CDMA Mode (default)
TestMode Menu
1. UMTS
UMTS > COMMON > NV REBUILD (NV REBUILD, NV BACKUP, NV RESTORE)
Everything else under UMTS either doesn't work.. or isn't worth messing with.
2. CDMA
CDMA > COMMON > NEXT PAGE > NEXT PAGE > PREF MODE SET (CDMA/EVDO/LTE, GSM/WCDMA, LTE ONLY, CDMA/LTE, CDMA ONLY, EVDO ONLY)
Everything else under CDMA either doesn't work.. or isn't worth messing with.
3. LTE
Nothing of interest.. just displays LTE debug status.
4. SIM
SIM > CHECK NV (Helps identify possible incorrect settings. Displays current PREF MODE. NV should be set under RTRE Config.)
Not worth messing with anything else in here.
5. run EFS SYNC()
Doesn't do anything.
There are lots of other options in here to mess with but most are broken, not supported or just really not worth messing with. All the MSL settings for example... no matter what.. I can't seem to read/write a new MSL via Test Mode. CDMA > CONTROL > MSL Edit has broken my MSL. *Update* Fixed MSL. I also messed up my EFS playing with the wrong stuff. I was able to recover.. but BE CAREFUL!!
##DATA# Menu
Same menu as hitting ##DATA# on dialer.
View
Data Profile - view current data profile
EVDO - view DDTM setting
Advanced - view MEID, Vocoder, Slotted Index, ACCOLC etc
USB Charging - view USB Charging setting
eHRPD - view eHRPD setting
PRL Write - Write new PRL with this option. PRL you are writing must be in root of storage and named test.prl
NAM Block - ??? can anyone explain this?
Others - view multimedia proxy values(Browser, MMSC, DSS)
Edit
Data Profile - edit data profile
EVDO - enable/disable DDTM
Advanced - edit Vocoder, Slotted Index, ACCOLC etc
USB Charging - enable/disable USB Charging
eHRPD - enable/disable eHRPD
Others
Browser - edit browser gateway ip/port/secure port
MMSC URL - edit MMS url
DSS - edit DSS server
Multimedia - edit RTSP and HTTPPD proxy settings
RC Data -
HDR/1X Selection - sets data mode... hybrid, cdma only, evdo only etc..
Voice Privacy - enable/disable voice privacy (disabled by default)
DTMF Set - set short/long DTMF
Toggle NAI - enable/disable NAI (enabled by default)
Korea Mode Set - don't mess with this
LTE APN Settings - set LTE APN
Dial Up Networking - enable/disable Dial Up Networking (off by default)
##MSL# Menu
View - view current phone number/msid set.
Edit - write new phone number/msid
##DEBUG# Menu
Various data debug menus. Nothing new here.
##Phone Util# Menu
UART pda/modem settings. This isn't really needed.
##RTN# Menu
Nothing new here. Same as ##786# dialer code. View phone information for perform a full reset on your device. This wipes /data and /internal memory as well as wiping all OTA provision settings.
Dialer Codes
Code:
##CLEAR# - Reset phone's network settings
##DSA# - DSSOption
##GPSCLRX# - Clear GPS Data
##LOG# - SysDump
##RTN# - RTN Menu (View/Reset)
##SCRTN# - Force OTA reprovisioning
##TTY# - TTY Test Mode
##DEBUG# - Debug Menu - 777468 (1x Eng, 1x Eng Protocol, EVDO Eng RF, EVDO Eng Protocol, LTE Eng, Configuration, Bluetooth, Data Status, eHRPD Eng, Others)
##DATA# - Data Menu (View/Edit)
*#06# - Display MSL
*#22558463# - Total Call Time Reset
*#232331# - Bluetooth RF Field Test
*#1111# - Read FTA SW Version
*#2222# - Read FTA HW Version
*#0228# - Battery Status
*#7284# - Phone Util
Click to expand...
Click to collapse
Max_Pain said:
anyone know where the settings are for MMS?
I'm trying to figure out how to send MMS on MetroPCS. on the Evo's I used a APN method, but apparently ICS doesn't allow 3rd party apps to write to APN. so I'm trying to enter the values manually. got into the DATA menu, entered a couple of the values, but a few other other values from that APN file are nowhere to be found in the DATA menu...and QPST refuses to see my phone?
any info on this would be great!
Click to expand...
Click to collapse
To get to the APNs on ICS, use Titanium Backup to make the APN Backup and Restore app a system app, reboot, then in APN Backup and Restore, check the box to bypass ICS check. You should be good to go.
autoprime said:
Most noteworthy edits include LTE only mode, LTE/CDMA mode(no 3G) and NV BACKUP/RESTORE. Nice little all-in-one shortcut for most of the hidden menus on this device.
If there is another thread on this in the Sprint Galaxy S III forums I apologize. Just going to outline this menu which is found on stock Sprint GS3 Touchwiz roms.
Click to expand...
Click to collapse
OMG, you have saved my sanity with this post! I've been pretty good at flashing and programming my family's phones and some for friends but most of those have been HTC units. I didn't think twice when I got a killer deal on a couple of 32GB GSIII's but trying to program these for our service has just about had me sticking my head in the oven more than once. One of the issues was that it seemed to depend on the handset's mood as to whether or not it would accept a code input via the keypad. I didn't even think of using a launcher to create a master shortcut like you have here. I'm still not quite there as far as getting these things programmed the way I want them but this post cut my irritation factor in half! Having said that, I'm still seriously considering tossing somebody a few bucks if they'd just do these for me. I love figuring things out and working on things like this as great puzzles but the hours I've put into these so far have kept me from getting actual work done. Are Samsungs always 50% hellspawns to work with?
Anyway, thanks again and thanks to everyone else who has posted great info on these phones. Part of me really wants to get a GalaxyNote II but another part of me is threatening suicide if I even think about wanting to program one!
Sprint GS3 CDMA. (SPH-L710) running android 4.1.1 and it is rooted and has CWM installed.
better cut 3.3 can not make a shortcut to the UI screens as only apps and widgets go there now since we are ICS and JB
what app to use?
or can i access the hiddenmenu another way?
i guess we sprint users dont need the shortcut as that menu for "USB Settings" is already there
##3424# lets me see that menu and i can easily select MTP, ADB and DB and all the rest.
so this isnt a problem anymore
thanks
Hello everyone,
I'm trying to flash AWS onto my I747m and currently am stuck at QPST with 'no phone' error. People have encountered this problem using Galaxy Note 2 attempting AWS mod and fixed it by enabling "DM/DUN over HSIC" in Diag Config mode so I want to try to do the same.
My problem is:
1. *#9090# code doesnt not work for me to prompt Diag Config
2. I am able to enter Diag Config mode by doing *#197328640# > UMTS > Common > Diag Config and my options are:
[1]USB()
[2]UART(*)
[3]DBG MSG ON (*)
[4]DBG MSG OFF ()
I don't have the options for:
[1]DM/DUM over HS-USB[]
[2]DM/DUM over HSIC[]
[3]DM/DUN/RmNET over HSUSB[]
[4]DM over UART(*)
[5]DBG MSG ON(*)
[6]DBG MSG OFF(*)
Where can I find the option to toggle DM/DUN over HSIC?
forevergone said:
Hello everyone,
I'm trying to flash AWS onto my I747m and currently am stuck at QPST with 'no phone' error. People have encountered this problem using Galaxy Note 2 attempting AWS mod and fixed it by enabling "DM/DUN over HSIC" in Diag Config mode so I want to try to do the same.
My problem is:
1. *#9090# code doesnt not work for me to prompt Diag Config
2. I am able to enter Diag Config mode by doing *#197328640# > UMTS > Common > Diag Config and my options are:
[1]USB()
[2]UART(*)
[3]DBG MSG ON (*)
[4]DBG MSG OFF ()
I don't have the options for:
[1]DM/DUM over HS-USB[]
[2]DM/DUM over HSIC[]
[3]DM/DUN/RmNET over HSUSB[]
[4]DM over UART(*)
[5]DBG MSG ON(*)
[6]DBG MSG OFF(*)
Where can I find the option to toggle DM/DUN over HSIC?
Click to expand...
Click to collapse
tray to connect it in off position to a software service as z3x than turn it on than try the code we wait the result
Does anyone know how to get to the network lock from the service more for a sm910a?
i bought a unlock code from the celluar unlock.net..failed...didnt get any PUK error so all good there
ive tried numerious ways of entering the defreeze code and call that still failed... now they want me to do a factory reset and i dont want to do that just yet...
Ive done the non att sim trick...ive done
The following code brought up the network unlock prompt #7465625*638*# tells me unlock cone is sucessful
im trying to get to the network lock function through the service menu. Ive tried :
· Dial *#197328640#
· Press the Menu > Back > Menu
· Open the Key input and enter 1, then press OK
· Press Menu > Back
· Press UMTS > Debug Screen > Phone Control > Network Lock
· Press Options > Perso SHA256 OFF
· Press Menu > Back
· Press COMMON > NW Lock NV Data INITIALLIZ
· Your Samsung Galaxy Note 3 is now SIM unlocked
None of that above gets me there:
This takes me to the debug screen but from there I cant get to the network lock:
Do the same for *#197328640#. That will open the Debug Screen.
service mode *#27663368378#
*#6328378#
One thing I havent tried is because the phone is ATT but I have it on a Straight Talk SIM for the BYOP is to go into the APN settings and switch it from the Straight talk APN settings to the ATT Nextgenphone option and then prompt to do the sim there... NEVERMIND DID THAT AND IT FAILED
Any ideas guys??
Ive read place online to unlock it via usb cable but it says it wipes the data so im wondering how that works
might have to see if there is any option for KIES.....
.....no wonder why people already buy them unlocked...
hello i have a s8 edge how can i get access on network lock menu?
Root work with kingroot 456
I have been trying to unlock my LG tribute 2 phone, after multiple emails with the company (boostmobile), they finally gave me the code, which appears to be an MSL code (6 digits), the problem is, when I insert my unaccepted sim card, the phone doesn't prompt me to do anything, the screen says invalid sim, an icon with sim card with (!) in the top right corner.
After searching online, I found this code on this site: ##3424# , I dialed it in, then entered the code Boostmobile gave me, it then open a screen the turns "DIAG" mode on and off.
that's it, but the sim card is still locked.
how can I get the phone to prompt for inserting the unlock code?
and let me know if I asked my question in the right section
Have you tried ##3282# menu
demonaxe said:
Have you tried ##3282# menu
Click to expand...
Click to collapse
This opened up a menu titled "Data", with a bunch of rows : data profile, EVDO, LTE, eHRPD, APN Settings, ItsOn, DSS, Browser, MMSC, Multimedia, Advanced.
not sure If this menu has anything to do with unlocking the the sim card. do you know more sprint codes that I can try?
gldiatr said:
This opened up a menu titled "Data", with a bunch of rows : data profile, EVDO, LTE, eHRPD, APN Settings, ItsOn, DSS, Browser, MMSC, Multimedia, Advanced.
not sure If this menu has anything to do with unlocking the the sim card. do you know more sprint codes that I can try?
Click to expand...
Click to collapse
You might have to unlock the bootloader to change the sprint settings
demonaxe said:
You might have to unlock the bootloader to change the sprint settings
Click to expand...
Click to collapse
Any Idea how to do that, and the likelihood of success?
does anyone know a code to reveal the simlock menu?
I guess no one cares to answer, where is the proper place to get ask this question?
I've been testing this phone for a while and it seems like a lot of the menus have been disabled. I'm creating a list of what works and what doesn't in these next few posts.
Note: I do not provide any support with the use of these codes. The thread is for documentation purposes.
What works:
5689#*993# (HiddenMenu) - Device Testing Menu
##27263# (##BRAND#) - Removes any carrier branding and redetects the carrier based on (NV registry/RUIM/SIM?).
Note: Useful if flashing to Boost Mobile or similar carrier.
##72786# (##?????#) - Resets provisioning and makes phone reactivate.
Useful if you are having network issues. Sprint recommends this if you ever change your services or phone number.
##72786# (##UPDATE#) - Updates cellular data profile and configures service. Also causes a firmware update check.
##786# (##RTN#) - Factory reset. Erases everything!!! RTN is short for return?
##3424# (##DIAG#) - Pulls up DIAG menu with option to enable or disable.
Selecting "Enable" allows Qualcomm Mode when the phone is set to "Charging mode" while ADB debugging is disabled.
##3282# (##DATA#) - Pulls up cellular data settings menu. You can view settings by choosing options and this also lets you adjust PRL settings with your MSL code.
##33284# (##DEBUG#) - Pulls up reception statistics, connectivity, and misc device information.
##564# (##LOG#) - System Error Log. Have options to clear or copy to storage. Viewing it will show Last kmsg, crash log, or ANR log.
Dial Codes That Don't Work
These are the dial codes that are not working on our model.
##PST#
Reserved
I've reserved this post for any comments I may have about the posts above.
Here is an updated list of what works.
What works:
##27263# Removes any branding (sprint) and resets phone to update branding. (useful if flashing to boost or other carrier) (##BRAND#) Reboots phone.
##72786# Resets provisioning and makes phone reactivate. Useful if you are having network issues. Sprint recommends this if you ever change your services or phone number. Reboots phone.
##873283# Updates data profile and configures service - Causes a firmware update check (##UPDATE#) Reboots phone.
##786# Factory reset. Erases everything!!! (##RTN#) Reboots phone.
##3424# Allows Qualcomm Mode while in Charging mode when ADB is disabled. (##DIAG#)
##3282# Data menu allows you to view and edit your provisioning setting if you have your MSL code (##DATA#)
##33284# Network debugging menu. Gives information about network status. ##DEBUG#
l33tlinuxh4x0r said:
Here is an updated list of what works.
Click to expand...
Click to collapse
Thanks, I'll update the op.
thals1992 said:
Thanks, I'll update the op.
Click to expand...
Click to collapse
There is a typo in the op. ##27269# (##BRAND#) should be ##27263# (##BRAND#)
---------- Post added at 09:14 AM ---------- Previous post was at 08:59 AM ----------
Just found another code. ##33284# ##DEBUG#
I'm finding that codes from the G2 that I have work.
https://forum.xda-developers.com/showthread.php?t=2523252
So I have been fooling around with the dialer codes and I still can't figure out how to change the apn settings.... Phone is UICC unlocked and I have my MSL.
Anything Suggestions?
##786# I did this and now my cellphone dont recogbize my sim card. What I need to do? please help
thals1992 said:
I've been testing this phone for a while and it seems like a lot of the menus have been disabled. I'm creating a list of what works and what doesn't in these next few posts.
What works:
##27263# (##BRAND#) - Removes any carrier branding and redetects the carrier based on (NV registry/RUIM/SIM?).
Note: Useful if flashing to Boost Mobile or similar carrier.
##72786# (##?????#) - Resets provisioning and makes phone reactivate.
Useful if you are having network issues. Sprint recommends this if you ever change your services or phone number.
##72786# (##UPDATE#) - Updates cellular data profile and configures service. Also causes a firmware update check.
##786# (##RTN#) - Factory reset. Erases everything!!! RTN is short for return?
##3424# (##DIAG#) - Pulls up DIAG menu with option to enable or disable.
Selecting "Enable" allows Qualcomm Mode when the phone is set to "Charging mode" while ADB debugging is disabled.
##3282# (##DATA#) - Pulls up cellular data settings menu. You can view settings by choosing options and this also lets you adjust PRL settings with your MSL code.
##33284# (##DEBUG#) - Pulls up reception statistics, connectivity, and misc device information.
##564# (##LOG#) - System Error Log. Have options to clear or copy to storage. Viewing it will show Last kmsg, crash log, or ANR log.
Click to expand...
Click to collapse
##72786# stands for ##SCRTN# which my best guess is sprint carrier return. or in other words carrier settings reset.
Now i got a sim crad invalid, cofiguration cellphone stuck (I can avoid pressa all buttons) and a message "power off device and inster the sim card that came with you phone, then restart"... and that is a problem, I'm not in USA ._.
MrManty said:
Now i got a sim crad invalid, cofiguration cellphone stuck (I can avoid pressa all buttons) and a message "power off device and inster the sim card that came with you phone, then restart"... and that is a problem, I'm not in USA ._.
Click to expand...
Click to collapse
Try taking out the sim card and booting up. Then reinsert the sim card and reboot.
5689#*993# - works for hidden menu
from this post: https://forum.xda-developers.com/showthread.php?t=2523252
does not work either... same issue sim cannot be detected. using volume up+volume down+power got passed configuring phone state.. now stuck with invalid sim even though phone is unlocked..
veshwar said:
does not work either... same issue sim cannot be detected. using volume up+volume down+power got passed configuring phone state.. now stuck with invalid sim even though phone is unlocked..
Click to expand...
Click to collapse
Did you solved it? same problem here!
If you have invalid sim on another carrier, try inserting the sprint sim and going to system update menu, then hit unlock uicc and it will reboot, then again go to system update and hit update profile then update prl. Then power off and insert the other sim and it should recognize it. Tell me if it works.
Sent from my LG-LS993 using XDA-Developers Legacy app
Dr-akbar said:
If you have invalid sim on another carrier, try inserting the sprint sim and going to system update menu, then hit unlock uicc and it will reboot, then again go to system update and hit update profile then update prl. Then power off and insert the other sim and it should recognize it. Tell me if it works.
Click to expand...
Click to collapse
Hey Guys..
My LG G6 of sprint is unlocked.. tested with att... call and text works fine.. but data does not.
I cannot edit or add APN as its grayed out in settings..
I tried ##DATA# and there it does not give me any option to edit delete or add ... just gives reset to default for APN Settings and nothing happens....
Please help
desmataks said:
Hey Guys..
My LG G6 of sprint is unlocked.. tested with att... call and text works fine.. but data does not.
I cannot edit or add APN as its grayed out in settings..
I tried ##DATA# and there it does not give me any option to edit delete or add ... just gives reset to default for APN Settings and nothing happens....
Please help
Click to expand...
Click to collapse
You have to get the UICC Profile Update from Sprint.... Call the International Team or chat with them online and ask to be UICC unlock, if asked why, you're about to travel abroad... This UICC Update might affect the Domestic Unlock. At one point my device was domestically unlock, but now it isn't. (Maybe because I did a hard reset.) **Never Reset After Unlock, I learned the hard way lol
Shortcut master lite works i had the same problem
---------- Post added at 12:58 AM ---------- Previous post was at 12:58 AM ----------
Find global settings and it will turn on data
Dr-akbar said:
If you have invalid sim on another carrier, try inserting the sprint sim and going to system update menu, then hit unlock uicc and it will reboot, then again go to system update and hit update profile then update prl. Then power off and insert the other sim and it should recognize it. Tell me if it works.
Sent from my LG-LS993 using XDA-Developers Legacy app
Click to expand...
Click to collapse
wtharden said:
You have to get the UICC Profile Update from Sprint.... Call the International Team or chat with them online and ask to be UICC unlock, if asked why, you're about to travel abroad... This UICC Update might affect the Domestic Unlock. At one point my device was domestically unlock, but now it isn't. (Maybe because I did a hard reset.) **Never Reset After Unlock, I learned the hard way lol
Click to expand...
Click to collapse
Thanks I got it unlocked finally again from sprint...
Other sims are working fine..
When I insert ATT sim card then if network mode is automatic then it shows 3G always and speed is too low tested with speedtest. If I change network mode to LTE-CDMA option then speed test is 4-5mbps but then calling does not work.. When i dial any no with LTE-CDMA mode then it says sim is not valid or there is no sim.
Will ATT not work fully with LTE on automatic mode on sprint LG G6?
Please help.
Thanks in advance.