Hello everyone,
I'm trying to flash AWS onto my I747m and currently am stuck at QPST with 'no phone' error. People have encountered this problem using Galaxy Note 2 attempting AWS mod and fixed it by enabling "DM/DUN over HSIC" in Diag Config mode so I want to try to do the same.
My problem is:
1. *#9090# code doesnt not work for me to prompt Diag Config
2. I am able to enter Diag Config mode by doing *#197328640# > UMTS > Common > Diag Config and my options are:
[1]USB()
[2]UART(*)
[3]DBG MSG ON (*)
[4]DBG MSG OFF ()
I don't have the options for:
[1]DM/DUM over HS-USB[]
[2]DM/DUM over HSIC[]
[3]DM/DUN/RmNET over HSUSB[]
[4]DM over UART(*)
[5]DBG MSG ON(*)
[6]DBG MSG OFF(*)
Where can I find the option to toggle DM/DUN over HSIC?
forevergone said:
Hello everyone,
I'm trying to flash AWS onto my I747m and currently am stuck at QPST with 'no phone' error. People have encountered this problem using Galaxy Note 2 attempting AWS mod and fixed it by enabling "DM/DUN over HSIC" in Diag Config mode so I want to try to do the same.
My problem is:
1. *#9090# code doesnt not work for me to prompt Diag Config
2. I am able to enter Diag Config mode by doing *#197328640# > UMTS > Common > Diag Config and my options are:
[1]USB()
[2]UART(*)
[3]DBG MSG ON (*)
[4]DBG MSG OFF ()
I don't have the options for:
[1]DM/DUM over HS-USB[]
[2]DM/DUM over HSIC[]
[3]DM/DUN/RmNET over HSUSB[]
[4]DM over UART(*)
[5]DBG MSG ON(*)
[6]DBG MSG OFF(*)
Where can I find the option to toggle DM/DUN over HSIC?
Click to expand...
Click to collapse
tray to connect it in off position to a software service as z3x than turn it on than try the code we wait the result
Related
T999 - pertinent replies are appreciated.
Dialed *#197328640# > UMTS > COMMON > DIAG CONFIG >
Code:
DIAG CONFIG
[1] USB ( )
[2] UART (*)
[3] DBG MSG ON (*)
[4] DBG MSG OFF ( )
Select the 1st option to switch it to USB and it comes back with:
Code:
USB_Diag Selected
Change Complete.
If You change Uart or USB diag
Please reboot the mobile.
Then, use Settings Key and select "Back" the USB is NOT selected.
Any ideas on how to get it switch to USB?
Tried the diag scripts but they don't enable it either. +those scripts are only for users not on TW (right?).
I've searched quite a bit for a while now with no luck. Need answer(s) specific to this phone as most solutions etc. including some of the USSD codes (eg. *#9090#) that work on other SGSIII don't necessarily work on T999.
The phone is still sim/network locked. Stock ICS 4.0.4 UVLH4 / Insecure Kernel / Rooted and busybox installed.
c'mon, someone's gotta have an answer to this...
I'm on the same boat now. I cant get it to switch to USB.
anyone ever figure this out???
Can you give a little more background ? What is the original problem that led you to try this solution ? Also what happens when you connect to a PC ? Does the MTP come on ?
After that second message about reboot, don't use back button do reboot.
try: menu >> key input >> 1
*#7284# ............ *#0808#
:fingers-crossed:
If your data connection in HTC One V is getting lost or not getting connected at all, try following steps.
You must have flashed NV Dump already.
Your phone must be activated via *228 already.
Just perform below mentioned steps :
1) Put your phone in Diag Mode by dialing ##3424#
2) Get HTC Diag Mode driver if you don't have it already
3) Download DFS Demo version from DFS website.
4) Connect your phone with DFS, send SPC
5) Now, go to Programming tab -> Data ->
6) Click Read
7) At PPP tab, write "net" (without quotes) to SIP NAI, UID, Pwd field.
Restart the device and you gotta go!
Hi guys,
To enable AWS on SGH I317M Note 2 I have to use QPST software. I can't use it because QPST doesn't find phone even though in device manager it is listed as Samsung Mobile Serial Port (Com14) and has no problem. When I click "Ad Port" in QPST environment I see it as COM14-USB/QC Data Modem with "No Phone message. I tried different versions of QPST on different computers with the same result. I guess , problem is in the PhoneUtil settings (*#7284#} and ServiceMode (*#9090#} I changed to unlock the phone with Z3X box. Now it is unlocked and works properly.
To enable AWS I put the phone in debug mode, in PhoneUtil settings #*7284# I put both PDA, Qualcomm settings are set to RNDIS+DM+Modem. What else do I have to do to see my phone in QPST software? What did I do wrong that the software doesn't connect with the phone? Do I have to flash it or just change some settings in the hidden menu? How to do that?
Did anybody have this problem / How did you solve it?
Thanks
I am having this problem as well. Any one have the answer?
Found the answer:
http://forum.xda-developers.com/showpost.php?p=36900197&postcount=314
My friend tried to flash the custom rom I am using on his s3 last night. Some reason it corrupted his efs folder and his imei became null/null. We flashed him back to stock rom with ODIN and IMEI change to the generic 040999....we were up all night searching for a fix and have tried everything from modem files to azira patch.
there is one solution that will fix it by repairing the nv file using NV-items reader writer. The problem is the phone needs to be in DIAG mode (DM Mode) for it to read the phone. Until now I have not found a way to get it. ##3424# does nothing. *#7284# only gives me QUAL (modem pda) and USB (Modem pda) there is no qualcomm settings where I am meant to enable diag mode. I have tried the scripts that apparently enable diag mode but to no avail. I did find a code *#9090# which brings up DAIG menu but when i select LOG VIA USB it says "LOG PATH SET FAIL"
So is there anyway I can get this i9300 into DIAG (or dm mode) any help will be much appreciated
*#0*# - LCD Test
*#0002*28346# - Audio control utility.
*#0011# - Power and Temprature settings
*#0228# - Battery Information
try these i used it on my grand and s4 worked!
Does anyone know how to get to the network lock from the service more for a sm910a?
i bought a unlock code from the celluar unlock.net..failed...didnt get any PUK error so all good there
ive tried numerious ways of entering the defreeze code and call that still failed... now they want me to do a factory reset and i dont want to do that just yet...
Ive done the non att sim trick...ive done
The following code brought up the network unlock prompt #7465625*638*# tells me unlock cone is sucessful
im trying to get to the network lock function through the service menu. Ive tried :
· Dial *#197328640#
· Press the Menu > Back > Menu
· Open the Key input and enter 1, then press OK
· Press Menu > Back
· Press UMTS > Debug Screen > Phone Control > Network Lock
· Press Options > Perso SHA256 OFF
· Press Menu > Back
· Press COMMON > NW Lock NV Data INITIALLIZ
· Your Samsung Galaxy Note 3 is now SIM unlocked
None of that above gets me there:
This takes me to the debug screen but from there I cant get to the network lock:
Do the same for *#197328640#. That will open the Debug Screen.
service mode *#27663368378#
*#6328378#
One thing I havent tried is because the phone is ATT but I have it on a Straight Talk SIM for the BYOP is to go into the APN settings and switch it from the Straight talk APN settings to the ATT Nextgenphone option and then prompt to do the sim there... NEVERMIND DID THAT AND IT FAILED
Any ideas guys??
Ive read place online to unlock it via usb cable but it says it wipes the data so im wondering how that works
might have to see if there is any option for KIES.....
.....no wonder why people already buy them unlocked...
hello i have a s8 edge how can i get access on network lock menu?
Root work with kingroot 456