A fellow member asked for instruction to getting Remix OS installed on Teclast X16 Plus, thus a simple write up below:
1) Download the necessary drivers - https://www.mediafire.com/?p723or9hxip5eu8
2) Download the Remix OS ROM (latest version from Teclast page B2016062701) - http://www.mediafire.com/download/84723txtl4gklzu/B2016062701.rar
3) Install the drivers in this exact sequence below
- iSocUSB-Driver-Setup-1.2.0.exe
- IntelAndroidDrvSetup1.10.0.zip
- PhoneFlashToolLite_5.5.2.0_win32.exe
When you reached the PhoneFlashToolLite installation, you will be prompted to override some of the earlier drivers installed, it is fine to override and proceed
4) Run "Phone Flash Tool LIte" , click "Browse”, go to the folder where you have downloaded and uncompressed the Remix OS ROM, choose "flash.json" and click ok
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5) Shutdown your X16 Plus from within Android, after which press simultaneously "vol up + vol down + power" buttons, release them when you see the words "DNX FASTBOOT MODE" on the screen
6) Connect your X16 Plus to your PC / laptop, if doing it for the first time, wait for the devices to be detected properly and drivers installed, by the end of which you should see on "Phone Flash Tool" a connected status and "Start to Flash" box turning blue.
7) When the flash is successful, the progress bar will turn green and shows 100%, the tablet will be disconnected automatically as it reboots, you can unplug the cable and let it boot up. The whole flashing takes about 2mins 45secs for me.
My views on the pros and cons of Remix OS:
- real easy multi windows tasking
- very solid battery life during standby
- UI is fluid and responsive
- yet to encounter an app that is incompatible and apps run well
- if a mouse is connected, right clicking will bring up functions similar to that of windows and mac os
- still a work in progress as some settings that is considered basic are not available, like "Battery"
- does not support widgets
Thank you very much.
in process,thank you for the howto. Only one thing,the intel android driver you provide,is blocked by my windows 10. He talk about an untrusted origin...downloaded from intel´s webpage.
---------- Post added at 01:07 AM ---------- Previous post was at 12:52 AM ----------
Done, working as a charm, a good review soon
Hi. A new x16 power owner here. Any update on root?
Is there any chance this would work for the X16 Pro?
Hi. I tried to install this but can't seemed to install well. Just saw the remix os logo and then it got shut down. And I lost my windows os on the dual boot session at the beginning.
Anyone knows how do I get my windows os back and got this remix working too?
Sent from my SM-G900FD using Tapatalk
wangiles said:
Hi. I tried to install this but can't seemed to install well. Just saw the remix os logo and then it got shut down. And I lost my windows os on the dual boot session at the beginning.
Anyone knows how do I get my windows os back and got this remix working too?
Sent from my SM-G900FD using Tapatalk
Click to expand...
Click to collapse
this is NOT for X16 Power, it is for X16 Plus, suggest you follow Teclast's instructions on how to flash win10 back onto the tablet.
potatohead said:
this is NOT for X16 Power, it is for X16 Plus, suggest you follow Teclast's instructions on how to flash win10 back onto the tablet.
Click to expand...
Click to collapse
Hi Potatohead,
I just want to understand well (cause I'm able to root phones or tablets, but only with a detailled methode from guys like you ^^):
Is it a multi-languages rom ?
It it a rooted rom ?
Is it a dual boot Windows/Android or only windows or only Android ?
Is it "attractive" for a basic use (I mean, for my girlfriend ^^)
Thanks a lot !
Rino (from France aka the no go zone !)
Manage to get windows reinstalled. Wonder why remix is not available for x16 power though. Will be great if able to.
Sent from my SM-P605 using Tapatalk
Anyone try this for x98 plus ii?
Please help, after flashing my tablet not boot.
joshtb86 said:
Anyone try this for x98 plus ii?
Click to expand...
Click to collapse
It's halfway working and there's a couple other threads about installing it. Several different versions of that model make it more complicated. You may need to swap in a different gpt.bin to make it flash if it's a c2e3 model. Camera, rotation, and sound wouldn't work for me. YMMV
Hello,
Installed in my Teclast X16 Plus and for now very happy because it is very fluid.
This Rom does not have root access, right? Does anyone know how to root this version?
Greetings and thanks
juansan10 said:
Hello,
This Rom does not have root access, right? Does anyone know how to root this version?
Click to expand...
Click to collapse
Hi JuanSan10
I received my X16 Plus 2 days ago and started to hack around. I managed to get a working TWRP and flash SuperSU from there if you're interested in gaining root privileges on it.
I would be happy to create a post to share it in the developers section but XDA rules doesn't allow me to post there before I posted 10 messages in general section (too bad for this time, though I understand the rule)
Would you be interested by my TWRP for the X16 Plus in order to be able to flash superSU through it ?
krustymars said:
Hi JuanSan10
I received my X16 Plus 2 days ago and started to hack around. I managed to get a working TWRP and flash SuperSU from there if you're interested in gaining root privileges on it.
I would be happy to create a post to share it in the developers section but XDA rules doesn't allow me to post there before I posted 10 messages in general section (too bad for this time, though I understand the rule)
Would you be interested by my TWRP for the X16 Plus in order to be able to flash superSU through it ?
Click to expand...
Click to collapse
Hi, I also have an x16 plus, and I'm interested in seeing your work, I liked to flash my tablet with TWRP, but really got it to work? If you can create a tutorial it would be great! thank you
Goku5 said:
Hi, I also have an x16 plus, and I'm interested in seeing your work, I liked to flash my tablet with TWRP, but really got it to work? If you can create a tutorial it would be great! thank you
Click to expand...
Click to collapse
I registered on XDA exactly to do that,create the tutorial and provide the recovery. Unfortunately I discovered the "5 to10 messages before to post in developers section" XDA rule after my registration ?
It looks like I can post yet though, so I'll create the tutorial and host the TWRP image soon enough.
krustymars said:
I registered on XDA exactly to do that,create the tutorial and provide the recovery. Unfortunately I discovered the "5 to10 messages before to post in developers section" XDA rule after my registration
It looks like I can post yet though, so I'll create the tutorial and host the TWRP image soon enough.
Click to expand...
Click to collapse
Okay, thanks for sharing, I'll be waiting.
With the twrp installed, then it is possible to install the supersu normally?
good job
Goku5 said:
Okay, thanks for sharing, I'll be waiting.
With the twrp installed, then it is possible to install the supersu normally?
good job
Click to expand...
Click to collapse
Yes it's possible,I did it on my tablet and it works like a charm.
I'm starting the tutorial writup now
Here it is @Goku5 @juansan10
TWRP on Teclast X16 Plus
krustymars said:
Here it is @Goku5
TWRP on Teclast X16 Plus
Click to expand...
Click to collapse
thanks @krustymars, I'll try tomorrow, then I'll say the result. :good:
greetings
Related
So today we see many tablets that are very cheap and the price starts from 100 dollars and even less.
Many consumers buy them and are happy with the stock setting but some of us want to get the most of the device and we now how we call this-------exactly ROOTING
But there we get this problems like:
Who is the manufacturer?
Why there is no information about the device?
Why ADB dont work?
and so on.......
My Father picked up a EXPLORE X770 like you can see on the pictures and the specs too ( ist a A13 device ) and cost 80 euros......he buyed it as a christmas present for my mother
Its quite fast but even my mother asked me the first minutes of use: Hey can you root it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I did with these steps:
Download DooMLoRD_v1_Xperia-2011-ICS-ROOT-emu-busybox-su.rar; http://forum.xda-developers.com/showthread.php?t=1601038
Download PDAnet (ADB drivers for tablets - how to install is described in the LInk); http://www.topnotchtablets.com/installADBdriver
Enable UNKNOWN SOURCES and Connect your tab in USB DEBUGGING mode, then run runme.bat file from the package.
Sit back read the on screen instructions
The device will reboot a couple of times
When the script finishes it will say "ALL DONE" Your tablet is rooted.
HIT THE THANKS IF YOU THINK THIS POST IS USEFUL ETC
Does it works with any generic tablet? I have a GT-7240 (7inch by.Genesis).
Sent from my GT-S5830i using Tapatalk 2
:good: :good: It's all good It work's for me !
Ampe a85 fashion
flaviamassa said:
Does it works with any generic tablet? I have a GT-7240 (7inch by.Genesis).
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
if on the box is written: allwinner a13 you are good to go
Problem
hello everyone I hope that you will be able to solve my problem then voila I have a A13 and i-MID ssuivi the tutorial to the letter are unknown sources and debugging enabled USB is enabled and also when I run the runme makes me starting, waiting for device
-daemon not runnig.starting it now
-daemon started successfully
and nothing happens and when I run the PdaNet puts me error 103 what? because I need after the rooter to use my external memory as internal memory.
thank you bye
http :// www. topnotchtablets .com/ installADBdriver
Dead link !
FlouSS said:
http :// www. topnotchtablets .com/ installADBdriver
Dead link !
Click to expand...
Click to collapse
try click this link again http://www.topnotchtablets.com/installADBdriver
the link just work fine with me
HIT THE THANKS IF YOU THINK THIS POST IS USEFUL ETC
Click to expand...
Click to collapse
Hit that thanks button for ya
Thanks so much!Finally i have gotten the adb drivers working and rooted it for my
Allwinner A13 Nuclear Android 4.0.4
THANK YOU!
Ravage32 said:
Hit that thanks button for ya
Thanks so much!Finally i have gotten the adb drivers working and rooted it for my
Allwinner A13 Nuclear Android 4.0.4
THANK YOU!
Click to expand...
Click to collapse
thank you so much sir..i have been searching for this since day one :highfive:
I got giving an a13 M010SQ8 it came rooted running ics 4.0.4 did any of you try root checker first ? mine is also nuclear build and from what iv been reading every a13 must be different
Sent from my M010SQ8 using XDA Premium HD app
My friend bought the same as you recieved and it didn't came rooted.
Some of those chinese clone bunnys are some not i quess.
Sent from my shooteru using Tapatalk 2
I'm not going to bother with cwm recovery or flashing jellybean there isn't any working firmware and I don't think there will ever be
Sent from my GT-S5830 using xda app-developers app
brewy said:
I'm not going to bother with cwm recovery or flashing jellybean there isn't any working firmware and I don't think there will ever be
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
I dont think its worth to try even a JB rom because you might end up without touchscreen working etc......i left it at 4.0 and end of story
Sent from my shooteru using Tapatalk 2
thanks
worked
for VIGO 10 tablet
So , i guess its not gonna work with my i-life wtab 702 running on jb 4.1.1 .
any possibilitiy to root this?
Thanks so much !
HYUNDAI A7 ART ICS 4.0.3 rooted Fine !
:good:
ROOT only: AllWinner (A13) TWD_MID 2G Tablet
gesange said:
So today we see many tablets that are very cheap and the price starts from 100 dollars and even less.
Many consumers buy them and are happy with the stock setting but some of us want to get the most of the device and we now how we call this-------exactly ROOTING
But there we get this problems like:
Who is the manufacturer?
Why there is no information about the device?
Why ADB dont work?
and so on.......
My Father picked up a EXPLORE X770 like you can see on the pictures and the specs too ( ist a A13 device ) and cost 80 euros......he buyed it as a christmas present for my mother
Its quite fast but even my mother asked me the first minutes of use: Hey can you root it?
View attachment 1566537
View attachment 1566538
View attachment 1566539
View attachment 1566540
View attachment 1566541
So I did with these steps:
Download DooMLoRD_v1_Xperia-2011-ICS-ROOT-emu-busybox-su.rar; http://forum.xda-developers.com/showthread.php?t=1601038
Download PDAnet (ADB drivers for tablets - how to install is described in the LInk); http://www.topnotchtablets.com/installADBdriver
Enable UNKNOWN SOURCES and Connect your tab in USB DEBUGGING mode, then run runme.bat file from the package.
Sit back read the on screen instructions
The device will reboot a couple of times
When the script finishes it will say "ALL DONE" Your tablet is rooted.
HIT THE THANKS IF YOU THINK THIS POST IS USEFUL ETC
Click to expand...
Click to collapse
THIS IS FOR (ROOT ONLY) ALLWINNER (A13) TWD_MID 2G TABLET w/ ICS 4.0.4
I never could find firmware from AllWinner (hopefully it's OK to provide their site: allwinner & allwinnertech dot com), never could find usb driver(s) & never could get the tablet or my pc to recognize each other (nothing here worked). Frustration & ignorance made me wonder why you have to have a pc to root an android device. I still don't have that understanding. What I DO have is an .apk that successfully rooted this tablet - here's the what & how:
1) dl these on the tablet: "framaroot 1.5.1" (available here courtesy of Alephzain - THANK YOU), a file manager if you don't have one (I have ASTRO), and "Root Checker" (free, google play store)
2) pre-root tablet settings: settings>dev options> enable USBdebugging
settings>security> enable unknown sources
3) run framaroot - in a blink it's done. run root checker to verify. go back into settings & uncheck usbdebug & unkn sources
There wasn't much to rooting this device - I wanted to practice on something before attempting anything exotic on my LG MS910 (MetroPCS).
This tablet already has ICS & I won't be too surprised if there never is a JB ROM that works 100% (I keep reading about touchscreen issues) but I'm learning & little successes like this are motivating.
Allwinner a13 rom
Hi thanks for your post but I have a different problem. After spending my time on googling I managed to confim the model chipset. However my tablet is stuck in bootloop and I am unable to get into recovery mode. Is there any software like restore binary for MMX canvas where you can flash rom while tab is turned off. I just want to install a recovery and turn on the tablet.
Nice job works with trio stealth g2 7inch tab
Sent from my G2 using XDA Premium 4 mobile app
Thanks a lot, this really worked for me!!!
I ended spending a fair amount of time chasing down a working root method, in the interest of saving time for anyone else who is looking I wanted to post the steps I took.
1.) Settings > Factory Settings > Enter Password: *#hct#root#
2.) Install Kingo Root: https://root-apk.kingoapp.com/kingoroot-download.htm
3.) Install SuperSU
3.) Install SuperSU Me: https://sites.google.com/site/androidxdacom/file/supersu-me-v6.7.apk?attredirects=0
Device will reboot, you'll want to update the SSU binary, and you'll be good to go.
Thank You for this info, it worked for me :good:
This works on every joying 5.1 unit?
How do you like the Joying brand?
Worked on mine. Thanks man
Sent from my SM-G935T using Tapatalk
---------- Post added at 09:23 PM ---------- Previous post was at 09:20 PM ----------
I have the double din 7 inch in my wrx, finding a proper trim kit that fit around the unit for me was tricky.. as they are a few mm bigger side to side and up an down that standard double dins. But was able to finally find one that was seamless for the wrx. Personally love mine. The pioneers and alpine are getting better but still think my joying is superior.. that's just my opinions.
Sent from my SM-G935T using Tapatalk
Just wanted to confirm for anyone interested that this process is still valid for the latest Joying build (6/12).
http://forum.xda-developers.com/and...tcd-device-t3385309/post67428387#post67428387
what are you doing with root access on the head unit?
bumpaudio said:
what are you doing with root access on the head unit?
Click to expand...
Click to collapse
AD blocking.
Tasker needs root to make some things with hardware.
Отправлено с моего Nexus 6 через Tapatalk
bumpaudio said:
what are you doing with root access on the head unit?
Click to expand...
Click to collapse
Replacing system apps, backups, etc.
w0rdie said:
I ended spending a fair amount of time chasing down a working root method, in the interest of saving time for anyone else who is looking I wanted to post the steps I took.
1.) Settings > Factory Settings > Enter Password: *#hct#root#
2.) Install Kingo Root: https://root-apk.kingoapp.com/kingoroot-download.htm
3.) Install SuperSU
3.) Install SuperSU Me: https://sites.google.com/site/androidxdacom/file/supersu-me-v6.7.apk?attredirects=0
Device will reboot, you'll want to update the SSU binary, and you'll be good to go.
Click to expand...
Click to collapse
I've got an MTCD in the mail and am trying to figure out the best way to take control over it.
That part about "kingo root" is scary as all hell. Who knows what its doing! And despite replacing it later on with "supersu" (which is not much less frightening, since it too is closed source), that is no guarantee that you are removing all remnants of it.
I suggest that this is not a good process to follow.
From what I understand, the recovery on these devices does NOT enforce signed updates. That means that the proper way to install something like this, is to inject it directly into an update. Just skip the exploit step altogether.
/////CANCEL QUESTION: One question I have though; what does the factory settings password actually do?//////
Answer: This turns on root. The silly things comes WITH ROOT ALREADY AVAILABLE!
Its actually better to NOT install any kind of root (kingoroot or supersu), since its already there, just blocked from the android side. This is more secure than leaving the device open to potential exploit, and gives you an avenue to go in and mess with things.
I
I am attempting this method and followed your instructions. I got a message that said adb root and I installed king root and my device rebooted. Super SU says my device is not rooted and Super-Sume gets stuck at "Preparing environment please wait..."
Can I get help?
Anyone know if it is possible to install TWRP? Anyone tried?
Well mine worked fine, then supersu app disappeared and reboot, now I'm stuck with bootloop and can't get into recovery!! Help! RK3188 800*480 MTCD.
Sent from my A0001 using XDA-Developers mobile app
Hi guys, I was able to fix my HU which was completely munted by following this thread.
https://forum.xda-developers.com/an...lopment/rom-malaysk-roms-mtcd-device-t3385309
I used the SD tool to create a boot card, then got the error which is shown in the thread then followed the next page which tells you to use the SD card and a USB thumb drive with the update file on it.
When the error shows up you eject the SD card and the system goes to recovery. Use the install from USB and clear all function and it does its thing.
The joying screen showed up for some time (about 5-10mins) but after booted to system and I'm in business again.
Don't follow my instructions here this is just a brief explanation of what I did, use the link above and try all steps and follow carefully.
Attached photo of the error screen I had in recovery FYI.
Please note this was after I used root method of factory settings code, king root and super su and I did have root access/ the binaries updated etc etc, so don't be scared to try as you can recover your system.
Also the firmware I used was the latest 5.1.1 from Joying website.
My unit is: RK3188 (800*480) MTCD which shipped in December 2016 with android 5.1.1.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my A0001 using XDA-Developers mobile app
[email protected] said:
Anyone know if it is possible to install TWRP? Anyone tried?
Click to expand...
Click to collapse
anyone?
An FYI,
I just got an Eonon GA 2155 w/ Android 5.1.1.
I tried other rooting methods without any success.
I used Kingoroot and it worked great. Compared to my Galaxy phones, a pie of cake.
Thanks to the OP
joying 5.1.1
I don't see a factory settings menu! Did they hide it or are my glasses in need of an upgrade.
rvroamer said:
I don't see a factory settings menu! Did they hide it or are my glasses in need of an upgrade.
Click to expand...
Click to collapse
They moved it to car settings and removed the ability to root through factory settings. (password for factory settings is 3368) there is no * or # button. Can someone please find a work around?!?!
jaaluk said:
They moved it to car settings and removed the ability to root through factory settings. (password for factory settings is 3368) there is no * or # button. Can someone please find a work around?!?!
Click to expand...
Click to collapse
I have one of these units coming, I would like to know as well how to root it since it's apparently disabled.
Anyone ? No more possibilities to root now ?
i tried hooking up an USB keyboard to be able to type in the missing characters, but no success.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sailfish OS (also styled as SailfishOS or abbreviated to SFOS) is a mobile operating system combining the Linux kernel for a particular hardware platform use, the open-source Mer core middleware, a proprietary UI contributed by Jolla, and other third-party components.
https://img.xda-cdn.com/sP516dFVJKyUezAnTyIGYjZ1iU0=/http%3A%2F%2Fpraxistipps-images.chip.de%2FZfsIsgbRpVTn3hYYVzeQ91Fxnz0%3D%2F0x0%2Ffilters%3Ano_upscale%28%29%3Aformat%28jpeg%29%2Fpraxistipps.s3.amazonaws.com%252Fdas-jolla-phone_210d4af5.png
It's a beautiful OS developed by the Jolla and the mer team. The UI is totally guesture based. So say good bye to your boring Android navigation bar. The OS is fast and butter smooth with zero lags. This is a totally new experience and certainly a delightful one from the same old boring mundane Android which has had almost the same UI since 5.0 .
Flashing Process:
Note: This has to be flashed over LineageOS 15.1
1. Download LineageOS 15.1: LineageOS 15.1
2. Download Sailfish OS 3.0: SailfishOS 3.0
3. Wipe cache, dalvik cache system and data. Copy the two ROMs to your phone.
4. Flash LineageOS 15.1 first, then Sailfish 3.0 .
Bugs:
Bluetooth.
WiFi once turned off won't work
MTP
Maybe other stuffs I dont Know
Please Note: It is in pre-alpha condition. Not stable. Only for the Curious minds. Stable build will be uploaded in a while. But you can still flash and get a feel of it.
I hope i wasn't too late pushing out a new build. Sorry if I was late
XDA:DevDB Information
SailfishOS, ROM for the Lenovo ZUK Z2 (Plus)
Contributors
PseudoDev, krnlyng, mal, sledges
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.x
Version Information
Status: Testing
Created 2017-10-20
Last Updated 2019-05-19
Wow, very interesting
Great work man..........hope it continues i give it a try when call start working as z 2 is my primary device great work really appreciate....
Hey, Great Work Man!!! I Am Using It As My Daily Driver. Please Fix Those Audio/Video And Calling bug. And Make It Official Please.... Got So Much Bored From Android. Please Make It Stable And Official And Continue The Development. Thanks For Your Work.
Very interesting, I'll watch this thread closely and I'll give it a try asap. Thanks for sharing your work.
Really interesting... Do we have screenshots?
Awesome work dev! I used it on my old redmi 2 and fell in love with it, had since been hoping someone would port it for zuk z2!
Is there any way to use WhatsApp on this build?
himzz0007 said:
Great work man..........hope it continues i give it a try when call start working as z 2 is my primary device great work really appreciate....
Click to expand...
Click to collapse
ChetanLokhande said:
Hey, Great Work Man!!! I Am Using It As My Daily Driver. Please Fix Those Audio/Video And Calling bug. And Make It Official Please.... Got So Much Bored From Android. Please Make It Stable And Official And Continue The Development. Thanks For Your Work.
Click to expand...
Click to collapse
Calling works. Just restart once.
Goldexplorer said:
Really interesting... Do we have screenshots?
Click to expand...
Click to collapse
Will upload in a while
PseudoDev said:
Calling works. Just restart once.
Will upload in a while
Click to expand...
Click to collapse
I have to question...
What we have to do if we want to go back to nouget roms after installing this...?
And WhatsApp and youtube
works in this rom?
@PseudoDev
I cannot get it to boot. When flashing sailfish OS right after flashing CM13, it does not install and gives error (screenshot attached)
It installs successfully after rebooting to TWRP after installing CM13, but on boot, the phone freezes with dim white LED always on. I ran that adb shell command yet it does not boot . I couldn't take logs at that time as phone was not recognized in adb.
hp5942 said:
@PseudoDev
I cannot get it to boot. When flashing sailfish OS right after flashing CM13, it does not install and gives error (screenshot attached)
It installs successfully after rebooting to TWRP after installing CM13, but on boot, the phone freezes with dim white LED always on. I ran that adb shell command yet it does not boot . I couldn't take logs at that time as phone was not recognized in adb.
Click to expand...
Click to collapse
Are you using twrp 3.1? Actually, i forgot to mention that you won't be able to flash this on twrp 3.1.
Holdon, lemme upload twrp 3.0.x
It is chinese but you can change the language in settings. After that, follow the steps again.
Edit: Uploaded. Download the recovery from the downloads tab
PseudoDev said:
Are you using twrp 3.1? Actually, i forgot to mention that you won't be able to flash this on twrp 3.1.
Holdon, lemme upload twrp 3.0.x
It is chinese but you can change the language in settings. After that, follow the steps again.
Edit: Uploaded. Download the recovery from the downloads tab
Click to expand...
Click to collapse
Yes I was using Official TWRP 3.1. I will try using 3.0.x and report later by evening. Thanks for the info
Can i try this rom with dual boot patcher ?
Finally something new , Hope it gets stable soon and development of this rom continues
PseudoDev said:
Calling works. Just restart once.
Will upload in a while
Click to expand...
Click to collapse
where to write in twrp the command i am writing on terminal in twrp its not working ??
himzz0007 said:
where to write in twrp the command i am writing on terminal in twrp its not working ??
Click to expand...
Click to collapse
Did you try on twrp 3.0?
It wont flash on 3.1
The commands run perfectly fine. Probably something wrong in your doing. Try again
PseudoDev said:
Did you try on twrp 3.0?
It wont flash on 3.1
The commands run perfectly fine. Probably something wrong in your doing. Try again
Click to expand...
Click to collapse
no i am not writing in 3.1 i first flash the twrp which u given ..then i install the cm13 then sailfish os then i go in advance of twrp in which terminal in their i go in the terminal and i wrote the command u given but somehow it showing error.....the problem is when i go in fastboot/bootloader option of zuk z 2 it do not show my device in adb in my computer but when i connect my device in 7.1.2 and then i wrote adb devices in terminal its shows...
himzz0007 said:
no i am not writing in 3.1 i first flash the twrp which u given ..then i install the cm13 then sailfish os then i go in advance of twrp in which terminal in their i go in the terminal and i wrote the command u given but somehow it showing error.....the problem is when i go in fastboot/bootloader option of zuk z 2 it do not show my device in adb in my computer but when i connect my device in 7.1.2 and then i wrote adb devices in terminal its shows...
Click to expand...
Click to collapse
What error do you see on terminal when you type it in the twrp terminal? Also, you don't have to go to fastboot. You need to stay on recovery and connect your device. From there, run the commands on PC.
PseudoDev said:
What error do you see on terminal when you type it in the twrp terminal? Also, you don't have to go to fastboot. You need to stay on recovery and connect your device. From there, run the commands on PC.
Click to expand...
Click to collapse
i have done everything as u said but their is only white light coming f in notification bar no boot animation etc....
himzz0007 said:
i have done everything as u said but their is only white light coming f in notification bar no boot animation etc....
Click to expand...
Click to collapse
While running the command, do you see any error?
Like, not found or something like that
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. It's a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Features:
All function in a normal TWRP
Supports English and Chinese
Supports MTP
Install guide:
1. Install fastboot tools from google's sdk on your PC
2. Enter fastboot mode
3. Unlock your bootloader
4. Run "fastboot flash recovery recovery.img" in command line
5. Reboot and enjoy it
Download:
*click*
fi4tch said:
https://drive.google.com/file/d/1-0WMrPutVGLn8Oav2hOsQSBdqyqCZ9ms/view?usp=drivesdk
Click to expand...
Click to collapse
Can you share the source please ?
Neverhopless said:
Can you share the source please ?
Click to expand...
Click to collapse
I found this recovery on Chinese forum, there are not sharing source codes, there is only recovery (it works btw)
fi4tch said:
I found this recovery on Chinese forum, there are not sharing source codes, there is only recovery (it works btw)
Click to expand...
Click to collapse
Can you please share your experience with the thermals i am confused
girishjangir7 said:
Can you please share your experience with the thermals i am confused
Click to expand...
Click to collapse
don’t listen to anyone about heating, I’m a fan of MMORPG, I play every day for 2-3 hours in a row on the phone and all those who say the phone heats up to 50-52 degrees, this is not true, after 2 hours of play I have the phone warmed up 46 degrees, under the cover it feels like normal heating, I advise you to take this phone, you will not regret it
fi4tch said:
don’t listen to anyone about heating, I’m a fan of MMORPG, I play every day for 2-3 hours in a row on the phone and all those who say the phone heats up to 50-52 degrees, this is not true, after 2 hours of play I have the phone warmed up 46 degrees, under the cover it feels like normal heating, I advise you to take this phone, you will not regret it
Click to expand...
Click to collapse
On charging does it go over 45 degree and what about gcam support????
And How much time does it require to charge as it is 18w charge ???
Lastly are you in the telegram group(https://forum.xda-developers.com/redmi-note-8-pro/how-to/redmi-note-8-pro-official-telegram-t3972171) if yes whats your username???
girishjangir7 said:
On charging does it go over 45 degree and what about gcam support????
And How much time does it require to charge as it is 18w charge ???
Lastly are you in the telegram group(https://forum.xda-developers.com/re.../redmi-note-8-pro-official-telegram-t3972171) if yes whats your username???
Click to expand...
Click to collapse
I think we should keep this thread focused in twrp! We can discuss in other threads about the phone itself.
So, can someone describe the process of installing twrp?
polfrank said:
I think we should keep this thread focused in twrp! We can discuss in other threads about the phone itself.
So, can someone describe the process of installing twrp?
Click to expand...
Click to collapse
Just those questions only and for installing twrp is the same steps are required i guess because its the same as all xiaomi phones just unlock bootloader and flash using fastboot flash recovery twrp_name.img
Post edited by moderator: please, the support should happen here on the thread. Thus, post content deleted.
Thanks!
polfrank said:
I think we should keep this thread focused in twrp! We can discuss in other threads about the phone itself.
So, can someone describe the process of installing twrp?
Click to expand...
Click to collapse
check instructions on google, its easier than you think
Wzsx150 twrp
Rajabulloh1989 said:
Wzsx150 twrp
Click to expand...
Click to collapse
Yeah it worked as the thread says that's a good start hope someone port rom or gcam also.
My recomendation is not try to flash the custom recovery, only boot it if you want to install something like magisk
how come that none of the above works on mi redmi note 8 pro :s
i tried every rom and nothing works..
even if i instruct it to boot from the rom im trying to flash it wonk work
it pops some kernel ramdisk error
Xristos79 said:
how come that none of the above works on mi redmi note 8 pro :s
i tried every rom and nothing works..
even if i instruct it to boot from the rom im trying to flash it wonk work
it pops some kernel ramdisk error
Click to expand...
Click to collapse
But there aren't any custom ROMs for redmi note 8 pro. Do you mean maybe flashing/booting the recovery?
polfrank said:
But there aren't any custom ROMs for redmi note 8 pro. Do you mean maybe flashing/booting the recovery?
Click to expand...
Click to collapse
yeap but i got it bricked
anyone knows what to do now ?
only the led shows up when im plug it in
REDMI NOTE 8 PRO IS DEAD
I have a redmi note 8 pro phone after opening the boot loader and continue to install twrp successfully but when I install the magisk manager hp bootloop after that I flash using the fastboot room china back to normal again, after that I try to install the latest MIUI 11 ROM but after I install it magisk manager returned my cell actually turned off completely, but if I connect the cable to the pc the notification light turns on and is connected and then I try to flash using the SP FLASH TOOL application has mediatek after I input the file mt6785_android_scatter.txt, then the flash out notif "error: status_sec_auth_file_needed 0xC0030012) ", required to enter file: authentication file. well I hope and ask for help the developer of the application or program to create a file: authentication file for redmi note 8 pro or for cipset mt6785, because my cellphone will not be able to come back if I do not have the file, please help me for the users and developers for the HP Redmi Note 8 Pro. sorry if my english is not good, please help me please
itocogan said:
REDMI NOTE 8 PRO IS DEAD
I have a redmi note 8 pro phone after opening the boot loader and continue to install twrp successfully but when I install the magisk manager hp bootloop after that I flash using the fastboot room china back to normal again, after that I try to install the latest MIUI 11 ROM but after I install it magisk manager returned my cell actually turned off completely, but if I connect the cable to the pc the notification light turns on and is connected and then I try to flash using the SP FLASH TOOL application has mediatek after I input the file mt6785_android_scatter.txt, then the flash out notif "error: status_sec_auth_file_needed 0xC0030012) ", required to enter file: authentication file. well I hope and ask for help the developer of the application or program to create a file: authentication file for redmi note 8 pro or for cipset mt6785, because my cellphone will not be able to come back if I do not have the file, please help me for the users and developers for the HP Redmi Note 8 Pro. sorry if my english is not good, please help me please
Click to expand...
Click to collapse
Hi, I don't know if this applies to new versions of miui, but In previous versions it was necessary install the Lazyflasher after installing TWRP. :cyclops:
Nope, lazyflasher doesn't do anything.
---------- Post added at 04:26 PM ---------- Previous post was at 04:23 PM ----------
The custom recovery works only straight after flashing it and the first reboot. After the next reboot it gets overwritten by the stock recovery. Flashing magisk bricks the device, so back to fastboot and flashing the stock rom
will release third party rom?
Thanks to:
chaosmaster / k4y0z: GitHub / XDA
xyzz / xyz`: GitHub / XDA
Dinolek: GitHub / XDA
How to install:
1. Download the attached file: VD171_MTK-bypass.zip.
2. Extract the file and open the folder.
3. Run and install python: python-3.9.1-amd64.exe.
Keep atention: You need to select "Add Python to PATH" before starting the installation.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Open cmd or powershell and execute this command:
pip install pyusb pyserial json5
5. Go to the Driver folder and right-click on the cdc-acm.inf file, then click Install and then, close window.
6. Run and install filter wizard: libusb-win32-devel-filter-1.2.6.0.exe.
7. Launch filter wizard.
8. Select Install a device filter and click Next.
9. Connect powered off phone with volume- button to boot in EDL mode.
10. Once you see new MediaTek USB Port in the list, select it and click Install.
Now, you are ready for bypassing EDL !
How to bypass:
1. Go to the Bypass folder. Run the script: bypass.bat.
2. Connect powered off phone with volume- button to boot in EDL mode.
3. Once you get "Protection disabled" at the end, without disconnecting phone and usb, run SP Flash Tool.
4. Once the SP Flash Tool opens, click Options > Options > Connection.
5. Select UART mode and select Baud rate to 921600.
Now, you are ready for flashing !
How to update:
1. Download latest release of the tool: https://github.com/MTK-bypass/bypass_utility/releases/latest
2. Download latest release of payloads: https://github.com/MTK-bypass/exploits_collection/releases/latest
3. Extract the content of both files to the Bypass folder.
Now, you are updated !
How does the bypass work?
Dissecting a MediaTek BootROM exploit
A bricked Xiaomi phone led me to discover a project in Github that uses a MediaTek BootROM exploit that was undocumented. The exploit was found by Xyz, and implemented by Chaosmaster. The initial exploit was already available for quite a while. Since I have managed to revive my phone, I am documenti
tinyhack.com
All Credits To:
chaosmaster / k4y0z: GitHub / XDA
xyzz / xyz`: GitHub / XDA
Dinolek: GitHub / XDA
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4225163/
#NoAuth #NoAuthentication #No-Auth #No-Authentication #MediaTek #Xiaomi
#MiAuth #MiAuthentication #Mi-Auth #Mi-Authentication #XiaoMiAuth #free
#XiaoMiAuthentication #XiaoMi-Auth #XiaoMi-Authentication #unbricking
#unbricked #unbrick
#MTK #MT6572 #MT6735 #MT6737 #MT6739 #MT6750 #MT6765 #MT6762
#MT6761 #MT6768 #MT6771 #MT6785 #MT8127 #MT8163 #MT8173 #MT8695
Good job, The guide helped a guy in telegram group unbrick his device.
Thanks for this
Communos said:
Good job, The guide helped a guy in telegram group unbrick his device.
Thanks for this
Click to expand...
Click to collapse
Good work, my friend
It solves all our problems for unbricking
woah this can speed up custom rom development for the device, just like the factory images on redmi note 8 pro, i hope lots of people see this!
Hi bro,
I have a problem with the bypass, when executing the .bat, it throws me the error in the image. I have been trying to do the process for a few days but the error is the same, it is a Redmi 9 (Lancelot) is on brick due to bad flashing. Do you know if there is any solution to this? I already tried disconnecting the battery and it doesn't even work.
Thanks for this great contribution
DavitidzeSh said:
woah this can speed up custom rom development for the device, just like the factory images on redmi note 8 pro, i hope lots of people see this!
Click to expand...
Click to collapse
It's already going good, LineageOS already out, Pixel Experience Plus released today, Few devs working on Other android Q roms, while 2 others are working on Android R tree
Communos said:
It's already going good, LineageOS already out, Pixel Experience Plus released today, Few devs working on Other android Q roms, while 2 others are working on Android R tree
Click to expand...
Click to collapse
Pixel Experience Released? Woah, I tried LineageOS and Its good for now, a few bugs here and there but it's good. I can't believe this is happening
Communos said:
It's already going good, LineageOS already out, Pixel Experience Plus released today, Few devs working on Other android Q roms, while 2 others are working on Android R tree
Click to expand...
Click to collapse
tbh it doesnt matter if its Q or R, If its stable im down
Communos said:
It's already going good, LineageOS already out, Pixel Experience Plus released today, Few devs working on Other android Q roms, while 2 others are working on Android R tree
Click to expand...
Click to collapse
btw, a link to pixel experience ROM? i can't find it
PathBoy92 said:
Hi bro,
I have a problem with the bypass, when executing the .bat, it throws me the error in the image. I have been trying to do the process for a few days but the error is the same, it is a Redmi 9 (Lancelot) is on brick due to bad flashing. Do you know if there is any solution to this? I already tried disconnecting the battery and it doesn't even work.
Thanks for this great contribution
View attachment 5219139
Click to expand...
Click to collapse
Apparentely you need to reinstall drivers and the device filter.
Try removing the device filter first and then reinstalling it too.
If you can, try in another computer.
Try to download and use the attached zip file, it is preconfigured to MT6768.
I get the exactly message you got with missconfigured drivers and device.
Certainly you need to check them.
DavitidzeSh said:
btw, a link to pixel experience ROM? i can't find it
Click to expand...
Click to collapse
PixelExperience_Plus_merlin-10.0-20210212-0344-UNOFFICIAL.zip | by itexpert120 for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Communos said:
PixelExperience_Plus_merlin-10.0-20210212-0344-UNOFFICIAL.zip | by itexpert120 for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Click to expand...
Click to collapse
Thanks, Do I need 12.0.3 to install this?
DavitidzeSh said:
woah this can speed up custom rom development for the device, just like the factory images on redmi note 8 pro, i hope lots of people see this!
Click to expand...
Click to collapse
I hope we can see all the partitions on this device demystified too.
There are many unused things on the device.
Many partitions have large sizes for few contents.
Other partitions are never used.
I would really like to know what they are all for.
I have tried with two different PCs and the result is always the same, I already tried uninstalling the drivers and installing everything again.
VD171 said:
I hope we can see all the partitions on this device demystified too.
There are many unused things on the device.
Many partitions have large sizes for few contents.
Other partitions are never used.
I would really like to know what they are all for.
Click to expand...
Click to collapse
to be honest i dont know anything about partitions. if it has potential value then im interested
PathBoy92 said:
I have tried with two different PCs and the result is always the same, I already tried uninstalling the drivers and installing everything again.
Click to expand...
Click to collapse
Probably it is not fully compatible with Lancelot.
I'm not sure.
I've tried with Dandelion (Redmi 9A / MT6765) and I can't bypass too.
But with Merlin, it works like a charm.
We need to keep watching the project and hope for newer releases as soon possible
VD171 said:
Probably it is not fully compatible with Lancelot.
I'm not sure.
I've tried with Dandelion (Redmi 9A / MT6765) and I can't bypass too.
But with Merlin, it works like a charm.
We need to keep watching the project and hope for newer releases as soon possible
Click to expand...
Click to collapse
Stay tuned for updates, thanks!
PathBoy92 said:
Stay tuned for updates, thanks!
Click to expand...
Click to collapse
I've attached a new zip file with the soon released files.
Please, try again and good luck
DavitidzeSh said:
Thanks, Do I need 12.0.3 to install this?
Click to expand...
Click to collapse
Would work on the same vendors needed for Lineage.
DavitidzeSh said:
Thanks, Do I need 12.0.3 to install this?
Click to expand...
Click to collapse
Pixel Experience doesn't work