Develop Bugs

[GUIDE] Flashing Remix OS on Teclast X16 Plus

A fellow member asked for instruction to getting Remix OS installed on Teclast X16 Plus, thus a simple write up below:
1) Download the necessary drivers - https://www.mediafire.com/?p723or9hxip5eu8
2) Download the Remix OS ROM (latest version from Teclast page B2016062701) - http://www.mediafire.com/download/84723txtl4gklzu/B2016062701.rar
3) Install the drivers in this exact sequence below
- iSocUSB-Driver-Setup-1.2.0.exe
- IntelAndroidDrvSetup1.10.0.zip
- PhoneFlashToolLite_5.5.2.0_win32.exe
When you reached the PhoneFlashToolLite installation, you will be prompted to override some of the earlier drivers installed, it is fine to override and proceed
4) Run "Phone Flash Tool LIte" , click "Browse”, go to the folder where you have downloaded and uncompressed the Remix OS ROM, choose "flash.json" and click ok
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5) Shutdown your X16 Plus from within Android, after which press simultaneously "vol up + vol down + power" buttons, release them when you see the words "DNX FASTBOOT MODE" on the screen
6) Connect your X16 Plus to your PC / laptop, if doing it for the first time, wait for the devices to be detected properly and drivers installed, by the end of which you should see on "Phone Flash Tool" a connected status and "Start to Flash" box turning blue.
7) When the flash is successful, the progress bar will turn green and shows 100%, the tablet will be disconnected automatically as it reboots, you can unplug the cable and let it boot up. The whole flashing takes about 2mins 45secs for me.
My views on the pros and cons of Remix OS:
- real easy multi windows tasking
- very solid battery life during standby
- UI is fluid and responsive
- yet to encounter an app that is incompatible and apps run well
- if a mouse is connected, right clicking will bring up functions similar to that of windows and mac os
- still a work in progress as some settings that is considered basic are not available, like "Battery"
- does not support widgets

Thank you very much.

in process,thank you for the howto. Only one thing,the intel android driver you provide,is blocked by my windows 10. He talk about an untrusted origin...downloaded from intel´s webpage.
---------- Post added at 01:07 AM ---------- Previous post was at 12:52 AM ----------
Done, working as a charm, a good review soon

Hi. A new x16 power owner here. Any update on root?

Is there any chance this would work for the X16 Pro?

Hi. I tried to install this but can't seemed to install well. Just saw the remix os logo and then it got shut down. And I lost my windows os on the dual boot session at the beginning.
Anyone knows how do I get my windows os back and got this remix working too?
Sent from my SM-G900FD using Tapatalk

wangiles said:
Hi. I tried to install this but can't seemed to install well. Just saw the remix os logo and then it got shut down. And I lost my windows os on the dual boot session at the beginning.
Anyone knows how do I get my windows os back and got this remix working too?
Sent from my SM-G900FD using Tapatalk
Click to expand...
Click to collapse
this is NOT for X16 Power, it is for X16 Plus, suggest you follow Teclast's instructions on how to flash win10 back onto the tablet.

potatohead said:
this is NOT for X16 Power, it is for X16 Plus, suggest you follow Teclast's instructions on how to flash win10 back onto the tablet.
Click to expand...
Click to collapse
Hi Potatohead,
I just want to understand well (cause I'm able to root phones or tablets, but only with a detailled methode from guys like you ^^):
Is it a multi-languages rom ?
It it a rooted rom ?
Is it a dual boot Windows/Android or only windows or only Android ?
Is it "attractive" for a basic use (I mean, for my girlfriend ^^)
Thanks a lot !
Rino (from France aka the no go zone !)

Manage to get windows reinstalled. Wonder why remix is not available for x16 power though. Will be great if able to.
Sent from my SM-P605 using Tapatalk

Anyone try this for x98 plus ii?

Please help, after flashing my tablet not boot.

joshtb86 said:
Anyone try this for x98 plus ii?
Click to expand...
Click to collapse
It's halfway working and there's a couple other threads about installing it. Several different versions of that model make it more complicated. You may need to swap in a different gpt.bin to make it flash if it's a c2e3 model. Camera, rotation, and sound wouldn't work for me. YMMV

Hello,
Installed in my Teclast X16 Plus and for now very happy because it is very fluid.
This Rom does not have root access, right? Does anyone know how to root this version?
Greetings and thanks

juansan10 said:
Hello,
This Rom does not have root access, right? Does anyone know how to root this version?
Click to expand...
Click to collapse
Hi JuanSan10
I received my X16 Plus 2 days ago and started to hack around. I managed to get a working TWRP and flash SuperSU from there if you're interested in gaining root privileges on it.
I would be happy to create a post to share it in the developers section but XDA rules doesn't allow me to post there before I posted 10 messages in general section (too bad for this time, though I understand the rule)
Would you be interested by my TWRP for the X16 Plus in order to be able to flash superSU through it ?

krustymars said:
Hi JuanSan10
I received my X16 Plus 2 days ago and started to hack around. I managed to get a working TWRP and flash SuperSU from there if you're interested in gaining root privileges on it.
I would be happy to create a post to share it in the developers section but XDA rules doesn't allow me to post there before I posted 10 messages in general section (too bad for this time, though I understand the rule)
Would you be interested by my TWRP for the X16 Plus in order to be able to flash superSU through it ?
Click to expand...
Click to collapse
Hi, I also have an x16 plus, and I'm interested in seeing your work, I liked to flash my tablet with TWRP, but really got it to work? If you can create a tutorial it would be great! thank you

Goku5 said:
Hi, I also have an x16 plus, and I'm interested in seeing your work, I liked to flash my tablet with TWRP, but really got it to work? If you can create a tutorial it would be great! thank you
Click to expand...
Click to collapse
I registered on XDA exactly to do that,create the tutorial and provide the recovery. Unfortunately I discovered the "5 to10 messages before to post in developers section" XDA rule after my registration ?
It looks like I can post yet though, so I'll create the tutorial and host the TWRP image soon enough.

krustymars said:
I registered on XDA exactly to do that,create the tutorial and provide the recovery. Unfortunately I discovered the "5 to10 messages before to post in developers section" XDA rule after my registration
It looks like I can post yet though, so I'll create the tutorial and host the TWRP image soon enough.
Click to expand...
Click to collapse
Okay, thanks for sharing, I'll be waiting.
With the twrp installed, then it is possible to install the supersu normally?
good job

Goku5 said:
Okay, thanks for sharing, I'll be waiting.
With the twrp installed, then it is possible to install the supersu normally?
good job
Click to expand...
Click to collapse
Yes it's possible,I did it on my tablet and it works like a charm.
I'm starting the tutorial writup now

Here it is @Goku5 @juansan10
TWRP on Teclast X16 Plus

krustymars said:
Here it is @Goku5
TWRP on Teclast X16 Plus
Click to expand...
Click to collapse
thanks @krustymars, I'll try tomorrow, then I'll say the result. :good:
greetings

[TOOL][PIXEL 2 XL] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)

This is the Pixel 2 XL's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
​

Cant wait to try it

Toejam1998 said:
Cant wait to try it
Click to expand...
Click to collapse
Tell me if it's work for you

I'll wait for a few others as well

Finally i got a solution for Nexus and Pixel Factory Image flash, now it works perfectly

does this do the critical unlock as well?

razgriz1234 said:
does this do the critical unlock as well?
Click to expand...
Click to collapse
I have integrated "fastboot flashing unlock_critical" for pixel 2 xl only, i have not tested it but it should work

mauronofrio said:
I have integrated "fastboot flashing unlock_critical" for pixel 2 xl only, i have not tested it but it should work
Click to expand...
Click to collapse
ok cool thanks for the quick reply

razgriz1234 said:
ok cool thanks for the quick reply
Click to expand...
Click to collapse
I saw now that i forgot to unlock the flash factory image option for all 4 Pixel, i have released an update to solve that, tell me if it works

This saved my ass last night got bootloop from hell nothing would flash at all run this and boom back in business so like to say thanks for the tool :good:

jaythenut said:
This saved my ass last night got bootloop from hell nothing would flash at all run this and boom back in business so like to say thanks for the tool :good:
Click to expand...
Click to collapse
I'm happy this tool helped you:good:
Do you flash a factory image with this tool?

mauronofrio said:
I'm happy this tool helped you:good:
Do you flash a factory image with this tool?
Click to expand...
Click to collapse
Yes mate

jaythenut said:
Yes mate
Click to expand...
Click to collapse
People like to see feedback and in this thread this is the first

Does this tool work well for Pixel XL2? If I wipe phone to unencrypt, will flashing stock re-encrypt it?

almahix said:
Does this tool work well for Pixel XL2? If I wipe phone to unencrypt, will flashing stock re-encrypt it?
Click to expand...
Click to collapse
I think way early on it was established we can't have it unencrypted once the OS install it's completed, unless something changed or I got it wrong. Lol

almahix said:
Does this tool work well for Pixel XL2? If I wipe phone to unencrypt, will flashing stock re-encrypt it?
Click to expand...
Click to collapse
You can uncrypt your phone but if you.flash a stock rom, the kernel at first boot will automatically encrypt your memory again. There are 2 different encryption, one by code and one with standard image key. At this moment the twrp will automatically uncrypt the system key but you need to manually write the code (if is setted). The tool will uncrypt both method, the flash of stock rom will re-uncrypt with system key but not with code key

mauronofrio said:
You can uncrypt your phone but if you.flash a stock rom, the kernel at first boot will automatically encrypt your memory again. There are 2 different encryption, one by code and one with standard image key. At this moment the twrp will automatically uncrypt the system key but you need to manually write the code (if is setted). The tool will uncrypt both method, the flash of stock rom will re-uncrypt with system key but not with code key
Click to expand...
Click to collapse
Grazie.

Just got my Pixel 2XL the other day and am excited to root and start modding. I have been monitoring this thread just to see what issues people are running into but it looks like not many people are even doing this surprisingly. I mean that's why I bought this Google phone, so I don't have to deal with locked bootloaders that these carriers put in them to discourage rooting. I know this phone is also locked but it's not for the purpose of keeping people from rooting them. I just think that it's so odd that this thread has very little activity.

dricacho said:
I just think that it's so odd that this thread has very little activity.
Click to expand...
Click to collapse
I think it too, but i don't know why.

dricacho said:
Just got my Pixel 2XL the other day and am excited to root and start modding. I have been monitoring this thread just to see what issues people are running into but it looks like not many people are even doing this surprisingly. I mean that's why I bought this Google phone, so I don't have to deal with locked bootloaders that these carriers put in them to discourage rooting. I know this phone is also locked but it's not for the purpose of keeping people from rooting them. I just think that it's so odd that this thread has very little activity.
Click to expand...
Click to collapse
mauronofrio said:
I think it too, but i don't know why.
Click to expand...
Click to collapse
The device is very expensive, has dual partitions, has gotten a lot of bad press, and not near as Dev friendly as some others. Having said that, there are about 5 custom roms, root, exposed, substratum, and various launcher and active edge mods. So it's not like we're hurting too bad ??

[GUIDE] How to bypass authentication and flash in EDL with NO auth for FREE

Thanks to:
chaosmaster / k4y0z: GitHub / XDA
xyzz / xyz`: GitHub / XDA
Dinolek: GitHub / XDA
How to install:
1. Download the attached file: VD171_MTK-bypass.zip.
2. Extract the file and open the folder.
3. Run and install python: python-3.9.1-amd64.exe.
Keep atention: You need to select "Add Python to PATH" before starting the installation.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Open cmd or powershell and execute this command:
pip install pyusb pyserial json5
5. Go to the Driver folder and right-click on the cdc-acm.inf file, then click Install and then, close window.
6. Run and install filter wizard: libusb-win32-devel-filter-1.2.6.0.exe.
7. Launch filter wizard.
8. Select Install a device filter and click Next.
9. Connect powered off phone with volume- button to boot in EDL mode.
10. Once you see new MediaTek USB Port in the list, select it and click Install.
Now, you are ready for bypassing EDL !
How to bypass:
1. Go to the Bypass folder. Run the script: bypass.bat.
2. Connect powered off phone with volume- button to boot in EDL mode.
3. Once you get "Protection disabled" at the end, without disconnecting phone and usb, run SP Flash Tool.
4. Once the SP Flash Tool opens, click Options > Options > Connection.
5. Select UART mode and select Baud rate to 921600.
Now, you are ready for flashing !
How to update:
1. Download latest release of the tool: https://github.com/MTK-bypass/bypass_utility/releases/latest
2. Download latest release of payloads: https://github.com/MTK-bypass/exploits_collection/releases/latest
3. Extract the content of both files to the Bypass folder.
Now, you are updated !
How does the bypass work?
Dissecting a MediaTek BootROM exploit
A bricked Xiaomi phone led me to discover a project in Github that uses a MediaTek BootROM exploit that was undocumented. The exploit was found by Xyz, and implemented by Chaosmaster. The initial exploit was already available for quite a while. Since I have managed to revive my phone, I am documenti
tinyhack.com
All Credits To:
chaosmaster / k4y0z: GitHub / XDA
xyzz / xyz`: GitHub / XDA
Dinolek: GitHub / XDA
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4225163/
#NoAuth #NoAuthentication #No-Auth #No-Authentication #MediaTek #Xiaomi
#MiAuth #MiAuthentication #Mi-Auth #Mi-Authentication #XiaoMiAuth #free
#XiaoMiAuthentication #XiaoMi-Auth #XiaoMi-Authentication #unbricking
#unbricked #unbrick
#MTK #MT6572 #MT6735 #MT6737 #MT6739 #MT6750 #MT6765 #MT6762
#MT6761 #MT6768 #MT6771 #MT6785 #MT8127 #MT8163 #MT8173 #MT8695

Good job, The guide helped a guy in telegram group unbrick his device.
Thanks for this

Communos said:
Good job, The guide helped a guy in telegram group unbrick his device.
Thanks for this
Click to expand...
Click to collapse
Good work, my friend
It solves all our problems for unbricking

woah this can speed up custom rom development for the device, just like the factory images on redmi note 8 pro, i hope lots of people see this!

Hi bro,
I have a problem with the bypass, when executing the .bat, it throws me the error in the image. I have been trying to do the process for a few days but the error is the same, it is a Redmi 9 (Lancelot) is on brick due to bad flashing. Do you know if there is any solution to this? I already tried disconnecting the battery and it doesn't even work.
Thanks for this great contribution

DavitidzeSh said:
woah this can speed up custom rom development for the device, just like the factory images on redmi note 8 pro, i hope lots of people see this!
Click to expand...
Click to collapse
It's already going good, LineageOS already out, Pixel Experience Plus released today, Few devs working on Other android Q roms, while 2 others are working on Android R tree

Communos said:
It's already going good, LineageOS already out, Pixel Experience Plus released today, Few devs working on Other android Q roms, while 2 others are working on Android R tree
Click to expand...
Click to collapse
Pixel Experience Released? Woah, I tried LineageOS and Its good for now, a few bugs here and there but it's good. I can't believe this is happening

Communos said:
It's already going good, LineageOS already out, Pixel Experience Plus released today, Few devs working on Other android Q roms, while 2 others are working on Android R tree
Click to expand...
Click to collapse
tbh it doesnt matter if its Q or R, If its stable im down

Communos said:
It's already going good, LineageOS already out, Pixel Experience Plus released today, Few devs working on Other android Q roms, while 2 others are working on Android R tree
Click to expand...
Click to collapse
btw, a link to pixel experience ROM? i can't find it

PathBoy92 said:
Hi bro,
I have a problem with the bypass, when executing the .bat, it throws me the error in the image. I have been trying to do the process for a few days but the error is the same, it is a Redmi 9 (Lancelot) is on brick due to bad flashing. Do you know if there is any solution to this? I already tried disconnecting the battery and it doesn't even work.
Thanks for this great contribution
View attachment 5219139
Click to expand...
Click to collapse
Apparentely you need to reinstall drivers and the device filter.
Try removing the device filter first and then reinstalling it too.
If you can, try in another computer.
Try to download and use the attached zip file, it is preconfigured to MT6768.
I get the exactly message you got with missconfigured drivers and device.
Certainly you need to check them.

DavitidzeSh said:
btw, a link to pixel experience ROM? i can't find it
Click to expand...
Click to collapse
PixelExperience_Plus_merlin-10.0-20210212-0344-UNOFFICIAL.zip | by itexpert120 for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com

Communos said:
PixelExperience_Plus_merlin-10.0-20210212-0344-UNOFFICIAL.zip | by itexpert120 for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Click to expand...
Click to collapse
Thanks, Do I need 12.0.3 to install this?

DavitidzeSh said:
woah this can speed up custom rom development for the device, just like the factory images on redmi note 8 pro, i hope lots of people see this!
Click to expand...
Click to collapse
I hope we can see all the partitions on this device demystified too.
There are many unused things on the device.
Many partitions have large sizes for few contents.
Other partitions are never used.
I would really like to know what they are all for.

I have tried with two different PCs and the result is always the same, I already tried uninstalling the drivers and installing everything again.

VD171 said:
I hope we can see all the partitions on this device demystified too.
There are many unused things on the device.
Many partitions have large sizes for few contents.
Other partitions are never used.
I would really like to know what they are all for.
Click to expand...
Click to collapse
to be honest i dont know anything about partitions. if it has potential value then im interested

PathBoy92 said:
I have tried with two different PCs and the result is always the same, I already tried uninstalling the drivers and installing everything again.
Click to expand...
Click to collapse
Probably it is not fully compatible with Lancelot.
I'm not sure.
I've tried with Dandelion (Redmi 9A / MT6765) and I can't bypass too.
But with Merlin, it works like a charm.
We need to keep watching the project and hope for newer releases as soon possible

VD171 said:
Probably it is not fully compatible with Lancelot.
I'm not sure.
I've tried with Dandelion (Redmi 9A / MT6765) and I can't bypass too.
But with Merlin, it works like a charm.
We need to keep watching the project and hope for newer releases as soon possible
Click to expand...
Click to collapse
Stay tuned for updates, thanks!

PathBoy92 said:
Stay tuned for updates, thanks!
Click to expand...
Click to collapse
I've attached a new zip file with the soon released files.
Please, try again and good luck

DavitidzeSh said:
Thanks, Do I need 12.0.3 to install this?
Click to expand...
Click to collapse
Would work on the same vendors needed for Lineage.

DavitidzeSh said:
Thanks, Do I need 12.0.3 to install this?
Click to expand...
Click to collapse
Pixel Experience doesn't work

Question Red Magic 6 Pro / Persist.img needed to restore fingerprint reader operation

Hello All,
I have successfully rooted my red magic 6 pro phone using the method described in the forum post:
Root achieved! Here's how to root the Red Magic 6 and Red Magic 6 Pro
I've been up 24 hours dealing with bootloops. I finally found a way to root the phone and have it boot up! :ROFLMAO: Join our Discord Channel https://discord.gg/8RHyc6Rw Youtube Video Tutorial: UPDATED VIDEO: For all those...
forum.xda-developers.com
I am faced with the issue of the fingerprint reader not working.
Tried fixing it by running the calibration procedure (https://forum.xda-developers.com/t/...er-print-after-loss-data-calibration.4132961/) with no success.
If anyone of you has an operational fingerprint reader in their red magic 6 pro and they would like to help me fix mine, please sent me the persists.img of your phone so I can flash it in my own and get the reader operational again.
There is another post that describes the procedure on how to extract the img from your phone from the forum:
Extracting stock Boot, Recovery and Persist images
Talking here about how to extract the stock Boot, Recovery and Persist images, needed in case of e.g. bootloop upon flashing Magisk or TWRP, to reflash the stock image(s). Also, boot image is needed for patching from Magisk Manager (and flashing...
forum.xda-developers.com
Any assistance will be greatly appreciated.

Ragemanster said:
Hello All,
I have successfully rooted my red magic 6 pro phone using the method described in the forum post:
Root achieved! Here's how to root the Red Magic 6 and Red Magic 6 Pro
I've been up 24 hours dealing with bootloops. I finally found a way to root the phone and have it boot up! :ROFLMAO: Join our Discord Channel https://discord.gg/8RHyc6Rw Youtube Video Tutorial: UPDATED VIDEO: For all those...
forum.xda-developers.com
I am faced with the issue of the fingerprint reader not working.
Tried fixing it by running the calibration procedure (https://forum.xda-developers.com/t/...er-print-after-loss-data-calibration.4132961/) with no success.
If anyone of you has an operational fingerprint reader in their red magic 6 pro and they would like to help me fix mine, please sent me the persists.img of your phone so I can flash it in my own and get the reader operational again.
There is another post that describes the procedure on how to extract the img from your phone from the forum:
Extracting stock Boot, Recovery and Persist images
Talking here about how to extract the stock Boot, Recovery and Persist images, needed in case of e.g. bootloop upon flashing Magisk or TWRP, to reflash the stock image(s). Also, boot image is needed for patching from Magisk Manager (and flashing...
forum.xda-developers.com
Any assistance will be greatly appreciated.
Click to expand...
Click to collapse
You need your persist.img that shipped with phone. Someone elses will NOT. You have lost FP forever.

bs3pro said:
You need your persist.img that shipped with phone. Someone elses will NOT. You have lost FP forever.
Click to expand...
Click to collapse
I've read for another phone that they were able to restore the functionality with the persist of another phone. I understand that the sensors are calibrated per device but it seems that the issue is more related to the security of the root rather than persist being actually corrupted.
Are you aware if I flash stock rom again if there is possibility for FP to work again?

why don't you extract it from the payload in the original ROM?

Andrologic said:
why don't you extract it from the original ROM?
Click to expand...
Click to collapse
If I am not mistaken, this is a per device partition and is not included in any ROM. As I understand it, persist.img contains all the sensors calibration data for the phone.
This is why I request from someone who has the same phone to extract and share so I can have a chance to save the FP functionality in my phone.

Ragemanster said:
If I am not mistaken, this is a per device partition and is not included in any ROM. As I understand it, persist.img contains all the sensors calibration data for the phone.
This is why I request from someone who has the same phone to extract and share so I can have a chance to save the FP functionality in my phone.
Click to expand...
Click to collapse
Understood. Yes, it's not a ROM file. I may switch to this device in the next day or two. Don't mind giving you a copy of mine if you haven't got it by then..

Andrologic said:
Understood. Yes, it's not a ROM file. I may switch to this device in the next day or two. Don't mind giving you a copy of mine if you haven't got it by then..
Click to expand...
Click to collapse
I would greatly appreciate it!
Thank you very much!

Andrologic said:
Understood. Yes, it's not a ROM file. I may switch to this device in the next day or two. Don't mind giving you a copy of mine if you haven't got it by then..
Click to expand...
Click to collapse
Hello bro i have same issue just for sure do u have redmagic6 pro with 5050mAh (international) version???
If yes please help me, im struggle two months with this issue and now know i lost my a file named persist.img lol

Any luck guys. I've got the same problem.

Ragemanster said:
Hello All,
I have successfully rooted my red magic 6 pro phone using the method described in the forum post:
Root achieved! Here's how to root the Red Magic 6 and Red Magic 6 Pro
I've been up 24 hours dealing with bootloops. I finally found a way to root the phone and have it boot up! :ROFLMAO: Join our Discord Channel https://discord.gg/8RHyc6Rw Youtube Video Tutorial: UPDATED VIDEO: For all those...
forum.xda-developers.com
I am faced with the issue of the fingerprint reader not working.
Tried fixing it by running the calibration procedure (https://forum.xda-developers.com/t/...er-print-after-loss-data-calibration.4132961/) with no success.
If anyone of you has an operational fingerprint reader in their red magic 6 pro and they would like to help me fix mine, please sent me the persists.img of your phone so I can flash it in my own and get the reader operational again.
There is another post that describes the procedure on how to extract the img from your phone from the forum:
Extracting stock Boot, Recovery and Persist images
Talking here about how to extract the stock Boot, Recovery and Persist images, needed in case of e.g. bootloop upon flashing Magisk or TWRP, to reflash the stock image(s). Also, boot image is needed for patching from Magisk Manager (and flashing...
forum.xda-developers.com
Any assistance will be greatly appreciated.
Click to expand...
Click to collapse
If you solve your problem please share with us.

You can directly use the persist image recovery of red Magic 5 mobile phone. The effect is the same. I have tested it

Hey guys!
I also lost the "persist" and with it almost all my sensors...Someone please share with me. I know it's not calibrated for my phone, but it can only be better :/ I've read all the RM6 forums that google puts out, but I can't find a solution :/
Thank you very much!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Question Is anyone working on building a custom recovery and rom

Now that the entire kernel source is released, is anyone working on building a custom recovery and rom for this device? I was looking at building orange fox recovery for it but I couldn't find how to make it with android 13 decryption support.

gwenmillett said:
Now that the entire kernel source is released, is anyone working on building a custom recovery and rom for this device? I was looking at building orange fox recovery for it but I couldn't find how to make it with android 13 decryption support.
Click to expand...
Click to collapse
You build, I'll try.. I'm decrypted with r/w permissions already. Used dfe neo and RO2RW by leegar, termux method and flashed super.img with fastboot.. Seeing as how we don't have recovery yet
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

JWnSC said:
You build, I'll try.. I'm decrypted with r/w permissions already. Used dfe neo and RO2RW by leegar, termux method and flashed super.img with fastboot.. Seeing as how we don't have recovery yetView attachment 5889613
Click to expand...
Click to collapse
May be you can try this https://github.com/BigfootACA/device_nubia_nx729j/releases

vadizzi said:
May be you can try this https://github.com/BigfootACA/device_nubia_nx729j/releases
Click to expand...
Click to collapse
Tried "fastboot boot twrp.img" blackscreen after logo...
Edit: my mistake it worked

i wroted this and it works but very strange. i use fastboot flash recovery ...img; recovery_a ...img and recovery_b ...img. I havent much enthusiasm on twrp so i droped it. You can flash it if worth offcourse

vadizzi said:
i wroted this and it works but very strange. i use fastboot flash recovery ...img; recovery_a ...img and recovery_b ...img. I havent much enthusiasm on twrp so i droped it. You can flash it if worth offcourse
Click to expand...
Click to collapse
Ohh ok. This phone is a little different from my last one op9p..recovery was inside ramdisk..so usually I would boot twrp.img and flash recovery to ramdisk..
I tried fastboot boot twrp.img..it switched to slot b..so I had to set active back to slot a..my mistake
I'll try your method and report back. Thanks!

vadizzi said:
i wroted this and it works but very strange. i use fastboot flash recovery ...img; recovery_a ...img and recovery_b ...img. I havent much enthusiasm on twrp so i droped it. You can flash it if worth offcourse
Click to expand...
Click to collapse
Yeah it worked! Default language is Chinese

It's reading internal storage( decrypted ofc).. Little laggy but usable.. Do you need logs or anything? I'll mess with it a little bit later today.

JWnSC said:
It's reading internal storage( decrypted ofc).. Little laggy but usable.. Do you need logs or anything? I'll mess with it a little bit later today.
Click to expand...
Click to collapse
no i just show it to you. Developer needs i think

vadizzi said:
no i just show it to you. Developer needs i think
Click to expand...
Click to collapse
Thanks! If he post in development section more users can post logs, test, ect ..I didn't even know this existed for our device. Does he have telegram group or something?

JWnSC said:
Thanks! If he post in development section more users can post logs, test, ect ..I didn't even know this existed for our device. Does he have telegram group or something?
Click to expand...
Click to collapse
I've just been browsing github and don't know any information

JWnSC said:
It's reading internal storage( decrypted ofc).. Little laggy but usable.. Do you need logs or anything? I'll mess with it a little bit later today.
Click to expand...
Click to collapse
Hello. Installed your TWRP, but the internal memory is not displayed and there is no active OTG. Did you do something wrong ?

batargin said:
Hello. Installed your TWRP, but the internal memory is not displayed and there is no active OTG. Did you do something wrong ?
Click to expand...
Click to collapse
This isn't my twrp.. I'm already decrypted, so I just test it. I could read internal storage on mine. Your probably still encrypted, so it wouldn't work for you.

JWnSC said:
This isn't my twrp.. I'm already decrypted, so I just test it. I could read internal storage on mine. Your probably still encrypted, so it wouldn't work for you.
Click to expand...
Click to collapse
I realized that you are testing, and I just have no one to turn to for help but you. How can I decrypt it? I just got the device today.

6.49 GB file on MEGA
mega.nz
MIUI 14 Rom you can try it we need some help to install.

ibestmoder said:
6.49 GB file on MEGA
mega.nz
MIUI 14 Rom you can try it we need some help to install.
Click to expand...
Click to collapse
Extract the file to a directory then put your phone in bootloader, connect your phone then go to the directory you extract and click on 8pro****.bat (*** for some chinese character). Your phone will then boot after it is done. However this is not a free rom you can run it for 30 minutes and you will have hard time to get back to stock rom since this rom modify the stock rom partitions.

[email protected] said:
Extract the file to a directory then put your phone in bootloader, connect your phone the go to the directory you extract and click on 8pro****.bat (*** for some chinese character). Your phone will then boot after it is done. However this is not a free rom you can run it for 30 minutes and you will have hard time to get back to stock rom since this rom modify the stock rom partitios.
Click to expand...
Click to collapse
I going to buy it from the maker he going do some changing to English with full support

Have someone tried that miui 14 rom? Are there any screenshots or something about what happens after 30 minutes? Might be possible to just remove that restrictions, but unless there's an easy way to revert back to stock (EDL or something), don't think it makes sense to flash it. Better wait for someone to build a proper CAF/CLO ROM (i.e. Paranoid Android)

aaa.bbb111222 said:
Have someone tried that miui 14 rom? Are there any screenshots or something about what happens after 30 minutes? Might be possible to just remove that restrictions, but unless there's an easy way to revert back to stock (EDL or something), don't think it makes sense to flash it. Better wait for someone to build a proper CAF/CLO ROM (i.e. Paranoid Android)
Click to expand...
Click to collapse
Rom is from chinese dev made out chinese 2.26. you need to pay 4 dollars to unlock it. I im Private with hem going to fix the rom for us

ibestmoder said:
Rom is from chinese dev made out chinese 2.26. you need to pay 4 dollars to unlock it. I im Private with hem going to fix the rom for us
Click to expand...
Click to collapse
It's MIUI, there's nothing that could fix that
That's not the point tho. Gonna assume no one yet tried flashing it (so the potential drawbacks not including 30 minutes lifetime are unknown. Should be always possible to remove that from ROM anyway). And we still don't have any way to unbrick, ZTE doesn't want to give us the flash tool for bs reasons.