Need Help, BootLooping after Odin Stock Flash to BPA1 - AT&T Samsung Galaxy Note 4

So I pretty muched messed up while trying to flash my phone and was going to factory reset it to start back over. I was using KingoRoot on pc to establish root then unlock the bootloader etc. After running the adb commands to unlock the bootloader the phone reset, ran again to finish commands and lucky me once it went to reboot it started bootlooping. So I hunted forever and finally found a bpa1 firmware file i could flash on odin to go back to stock. Using the full firmware from here http://forum.xda-developers.com/not...mware-firmware-kernel-modem-recovery-t2942937 I used odin to flash it back to stock. So it passed went to recovery did its thing then starts up and is bootlooping again. I'm kinda lost what to do now. Help Please lol\

After rooting and unlocking, you need to install a compatible kernel, like multi kernel that supports being rooted
Sent from my SM-N910V using Tapatalk

brickbeats said:
After rooting and unlocking, you need to install a compatible kernel, like multi kernel that supports being rooted
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
Yeah that was my mistake, but im trying to flash it back to stock. And after using odin to go to stock its still looping on the note 4 screen.

clark707 said:
Yeah that was my mistake, but im trying to flash it back to stock. And after using odin to go to stock its still looping on the note 4 screen.
Click to expand...
Click to collapse
You mentioned that you were trying to unlock your bootloader. Did you try taking the SD card out?

Loading... said:
You mentioned that you were trying to unlock your bootloader. Did you try taking the SD card out?
Click to expand...
Click to collapse
you smart bastard... that worked,, now why did the sd card being in the phone cause this issue so i dont repeat this down the road.

clark707 said:
you smart bastard... that worked,, now why did the sd card being in the phone cause this issue so i dont repeat this down the road.
Click to expand...
Click to collapse
The bootloader unlock procedure essentially corrupts your sd card. You need to reformat the whole thing since it becomes riddled with insane partitions during the process. You didn't do anything wrong, you just need to remove the card after you unlock and then reformat it later.

lmfao u stated u had 5.1.1 .....
clark707 said:
So I pretty muched messed up while trying to flash my phone and was going to factory reset it to start back over. I was using KingoRoot on pc to establish root then unlock the bootloader etc. After running the adb commands to unlock the bootloader the phone reset, ran again to finish commands and lucky me once it went to reboot it started bootlooping. So I hunted forever and finally found a bpa1 firmware file i could flash on odin to go back to stock. Using the full firmware from here http://forum.xda-developers.com/not...mware-firmware-kernel-modem-recovery-t2942937 I used odin to flash it back to stock. So it passed went to recovery did its thing then starts up and is bootlooping again. I'm kinda lost what to do now. Help Please lol\
Click to expand...
Click to collapse
I'd go to Samsung mobile and download BPA1 firmware .....you know the one your bootloader is set for.....you need to read more . this was a stupid mistake that could been easily avoided. slow down

Related

[Q] Need to go back to Stock Rom without USB

hi,
my USB port on my phone is broken and I need to go back to stock ROM for warrenty. Currently I use the Paranoid ROM 4.2.2 JDQ39 (3.67) and TWPR recovery. I read a lot of posts but I didn´t find a complete guide. So I want to ask if I can do it this way?
1. Close Bootloader with "BootUnlocker for Nexus Devices" app from the playstore
2. Download Factory Image 4.2.2 from the google developers page
Extract everything. I need the files: System.IMG, Boot.IMG, Userdata.IMG, Recovery.IMG ? Or do I need other files?
3. Install Mobile Odin Pro on my phone
4. Load the IMG files in Mobile Odin Pro and start
Is this right? What is with the radio? I have XXLJ1 on my phone. I think it is the latest. Isn´t it?
It would be nice if someone can help me.
thanks
//Patrice// said:
hi,
my USB port on my phone is broken and I need to go back to stock ROM for warrenty. Currently I use the Paranoid ROM 4.2.2 JDQ39 (3.67) and TWPR recovery. I read a lot of posts but I didn´t find a complete guide. So I want to ask if I can do it this way?
1. Close Bootloader with "BootUnlocker for Nexus Devices" app from the playstore
2. Download Factory Image 4.2.2 from the google developers page
Extract everything. I need the files: System.IMG, Boot.IMG, Userdata.IMG, Recovery.IMG ? Or do I need other files?
3. Install Mobile Odin Pro on my phone
4. Load the IMG files in Mobile Odin Pro and start
Is this right? What is with the radio? I have XXLJ1 on my phone. I think it is the latest. Isn´t it?
It would be nice if someone can help me.
thanks
Click to expand...
Click to collapse
You'll have to close the bootloader last otherwise you won't be able to flash the imgs.
I don't know if you'll can, you'll have to keep root when you reset it because you'll have to lock the bootloader last, then you could factory reset.
Not sure though.
Beauenheim said:
You'll have to close the bootloader last otherwise you won't be able to flash the imgs.
I don't know if you'll can, you'll have to keep root when you reset it because you'll have to lock the bootloader last, then you could factory reset.
Not sure though.
Click to expand...
Click to collapse
I thought I don't need a open bootloader for Odin Mobile?
I just did this with the same problem about a month ago, and I relocked the bootloader first because you won't have root or a way to use fastboot to lock it afterward. Odin worked just fine with bootloader locked.
underwaterjr said:
I just did this with the same problem about a month ago, and I relocked the bootloader first because you won't have root or a way to use fastboot to lock it afterward. Odin worked just fine with bootloader locked.
Click to expand...
Click to collapse
You did it the same way as I described it in my first post?
Does nobody know if i can do it this way?
Sent from my Galaxy Nexus using xda app-developers app
i sent my gnex in for the same broken usb port issue, and all i did to the bad one was do a factory reset on cm10.whatever it was at the time, and locked the bootloader with that app, probably did that first i guess lol.
but they havent charged me for that, so i assume its all good, its been a few months so if they were going to charge me they would have i assume
un4givn85 said:
i sent my gnex in for the same broken usb port issue, and all i did to the bad one was do a factory reset on cm10.whatever it was at the time, and locked the bootloader with that app, probably did that first i guess lol.
but they havent charged me for that, so i assume its all good, its been a few months so if they were going to charge me they would have i assume
Click to expand...
Click to collapse
But I´m not sure if it works for me too, so I would like to try to go back to stock ROM. The problem is that I don´t know if it works with this guide and I don´t want to make a mistake.
can anyone tell me if it is possible to use the 4.2.2 factory image from the google developers site or do I have to use a special odin file?
If I have to use a odin file where can I find it? I only found old files with android 4.0.1
thanks in advance for any help.
Can anybody help me with my problem? I try to go back to stock to send it in.
Thanks
Sent from my Transformer TF101 using xda app-developers app
This may or may not be relevant but I used to have a T989 (TMO GSII) and the USB port when bad as well. Any connection that I attempted would last brief moments and in one of those, I took the chance and tried restoring. What ended up happening is the update did not complete and the phone remained in the ODIN screen even after reboots. I sent it in like so and they still honored the warranty. So what I'm trying to say, as a last resort you could intentionally brick your GN...
I have heard however, that warranty companies don't always check to see if you've messed with the software so there's another thought.
Just send it back as is. Your problem is hardware related, not software. They'll refurb the phone and re-image it anyway.
Thanks for your answers!
OK I understand. But is it that dangerous to go back to stock without USB, so I shouldn't do it or is it only that you think it is not necessary?
Sent from my Transformer TF101 using xda app-developers app
Hi,
I have still the same problem. Is nobody here who can help me?
I have the problem that I don´t know if I can use the guide from my first post, and which file I can use.
thanks for any help!
//Patrice// said:
Hi,
I have still the same problem. Is nobody here who can help me?
I have the problem that I don´t know if I can use the guide from my first post, and which file I can use.
thanks for any help!
Click to expand...
Click to collapse
Why dont you download this on your phone directly http://forum.xda-developers.com/showthread.php?t=1882248 and then flash it using Mobile Odin or Recovery. Dont flash SuperUser. Factory reset and then lock the bootloader.
Wouldnt that work?
rajuki said:
Why dont you download this on your phone directly http://forum.xda-developers.com/showthread.php?t=1882248 and then flash it using Mobile Odin or Recovery. Dont flash SuperUser. Factory reset and then lock the bootloader.
Wouldnt that work?
Click to expand...
Click to collapse
I think I could flash this with TWRP, if it´s no problem that I come from Paranoid 4.2.2 ? But it is not really stock. Is it? What happen than when I do the factory reset? Does it erase TWRP? And I think I need root to lock the bootloader...
//Patrice// said:
I think I could flash this with TWRP, if it´s no problem that I come from Paranoid 4.2.2 ? But it is not really stock. Is it? What happen than when I do the factory reset? Does it erase TWRP? And I think I need root to lock the bootloader...
Click to expand...
Click to collapse
So lets try this again, OK?
1. Download the stock rom from the link and copy to your phone
2. Boot into TWRP
3. Wipe data
4. Flash the stock 4.3 rom you downloaded
5. Reboot.
Now, you have stock 4.3 but you are still rooted. A factory reset from the OS doesnt unroot you or takes away your root.
6. Download this app https://play.google.com/store/apps/details?id=net.segv11.bootunlocker&hl=en and lock yout bootloader. This will do a wipe again.Now reboot.
7. Remove /system/bin/su via adb shell or by using root explorer
8. Remove /system/app/Superuser.apk via adb shell on phone or by using root explorer
9. Factory reset.
Done. By now, you should be stock, unrooted and without any custom recoveries.
rajuki said:
So lets try this again, OK?
1. Download the stock rom from the link and copy to your phone
2. Boot into TWRP
3. Wipe data
4. Flash the stock 4.3 rom you downloaded
5. Reboot.
Now, you have stock 4.3 but you are still rooted. A factory reset from the OS doesnt unroot you or takes away your root.
6. Download this app https://play.google.com/store/apps/details?id=net.segv11.bootunlocker&hl=en and lock yout bootloader. This will do a wipe again.Now reboot.
7. Remove /system/bin/su via adb shell or by using root explorer
8. Remove /system/app/Superuser.apk via adb shell on phone or by using root explorer
9. Factory reset.
Done. By now, you should be stock, unrooted and without any custom recoveries.
Click to expand...
Click to collapse
OK this sounds good. I will try it.
Thank you!!
rajuki said:
So lets try this again, OK?
1. Download the stock rom from the link and copy to your phone
2. Boot into TWRP
3. Wipe data
4. Flash the stock 4.3 rom you downloaded
5. Reboot.
Now, you have stock 4.3 but you are still rooted. A factory reset from the OS doesnt unroot you or takes away your root.
6. Download this app https://play.google.com/store/apps/details?id=net.segv11.bootunlocker&hl=en and lock yout bootloader. This will do a wipe again.Now reboot.
7. Remove /system/bin/su via adb shell or by using root explorer
8. Remove /system/app/Superuser.apk via adb shell on phone or by using root explorer
9. Factory reset.
Done. By now, you should be stock, unrooted and without any custom recoveries.
Click to expand...
Click to collapse
I have one more question. In step 3 should I do a factory reset before I flash the rom? Because I usually do one when I install a new rom and I don't want to do a mistake because I can't use usb to fix it. And is it OK that I go from 4.2.2 Paranoid to this 4.3 stock rom?
//Patrice// said:
I have one more question. In step 3 should I do a factory reset before I flash the rom? Because I usually do one when I install a new rom and I don't want to do a mistake because I can't use usb to fix it. And is it OK that I go from 4.2.2 Paranoid to this 4.3 stock rom?
Click to expand...
Click to collapse
Before you flash the new ROM; you must wipe data.
And yes, its OK to come from 4.2.2 to 4.3 as long as you wipe data.

[Q] HELP I seem to be stuck.....

Good Evening all,
I have a T-mobile Galaxy S3 that was rooted. That I took back to stock and unrooted using Odin and T999UVALEM_T999TMBALEM_T999UVALEM_HOME.tar......I let the phone sit for about 25-30 min and it never really made it past the pulsing SAMSUNG screen. Now I rebooted into Flashing Mode (Odin) and Flashed CF-Auto-Root-d2tmo-d2tmo-sght999.tar, thinking that would help.......however.....I still seem to be stuck.....How do I get myself unstuck? Thanks so much for any help .....
Mic
Have you tried using stock recovery and perform a factory reset? I also took mine back to stock via Odin, performed the factory reset and worked fine
Sent from my SGH-T999 using Tapatalk
Hellfireworks said:
Have you tried using stock recovery and perform a factory reset? I also took mine back to stock via Odin, performed the factory reset and worked fine
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I did do that.....and was able to update to 4.3 through t-mobile, however, now I have a black block which appears over all screens giving or listing what seems to be the information about my phone, and a warning that the phone is in "Factory Mode" and I need to reset it back to user.....or something like that...it comes and goes kinda fast....I wanted to flash a different ROM but I went back to stock to kinda clean up my internal SD....it was getting kinda bulked down with all the roms I was trying.........but now I am stuck with this......any ideas??
jinx0117 said:
I did do that.....and was able to update to 4.3 through t-mobile, however, now I have a black block which appears over all screens giving or listing what seems to be the information about my phone, and a warning that the phone is in "Factory Mode" and I need to reset it back to user.....or something like that...it comes and goes kinda fast....I wanted to flash a different ROM but I went back to stock to kinda clean up my internal SD....it was getting kinda bulked down with all the roms I was trying.........but now I am stuck with this......any ideas??
Click to expand...
Click to collapse
Did you update to 4.3 while you were in stock? If you did that, maybe Knox is causing you these issues, if you havent been in 4.3 in stock, you shouldn't have that issue.
I would suggest flashing 4.1.2 version via odin, after that enter recovery and do a factory reset, after that reboot and it should start properly
Sent from my SGH-T999 using Tapatalk
Hellfireworks said:
Did you update to 4.3 while you were in stock? If you did that, maybe Knox is causing you these issues, if you havent been in 4.3 in stock, you shouldn't have that issue.
I would suggest flashing 4.1.2 version via odin, after that enter recovery and do a factory reset, after that reboot and it should start properly
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I originally went to Stock 4.1.2....then got tried to root the phone thinking that flashing different Rom would fix the issue.....no dice...So I flashed back to the 4.1.2 Stock. Made my way around the block that pops up telling me I need to set it back to user mode and did the OTA update. After the update it was still saying that I was in Factory Mode....and needed to reset it to User Mode.....In did a hard reset and wipe....and it is still there.....I may be able to change it through root explorer but I need to root my phone again.....and I have no idea where a safe place to start would be for that....
@jinx0117
Sounds like your EFS folder might have been erased. You can root the phone and check with a file explore. If you don't have a backup of it, there is no way to recover it.
If you have updated to official 4.3 don't try to downgrade with odin or you will end up with a full brick.
sswb27 said:
@jinx0117
Sounds like your EFS folder might have been erased. You can root the phone and check with a file explore. If you don't have a backup of it, there is no way to recover it.
If you have updated to official 4.3 don't try to downgrade with odin or you will end up with a full brick.
Click to expand...
Click to collapse
Thank you so much for telling me that.....I was able to root and reset my phones Factory Mode by use of a Emulator. Now I did follow some steps I found here on XDA to get around the Knox Security that T mobile put on the 4.3 update......I am able to flash Roms now with no issues.....thanks so much everyone for all your help!!!!
I will assume that if I want to take it back to stock again I would need to flash a 4.3 stock with Odin???? That way I don't brick my phone? Is that correct?:good:
jinx0117 said:
Thank you so much for telling me that.....I was able to root and reset my phones Factory Mode by use of a Emulator. Now I did follow some steps I found here on XDA to get around the Knox Security that T mobile put on the 4.3 update......I am able to flash Roms now with no issues.....thanks so much everyone for all your help!!!!
I will assume that if I want to take it back to stock again I would need to flash a 4.3 stock with Odin???? That way I don't brick my phone? Is that correct?:good:
Click to expand...
Click to collapse
Yea, Stick with 4.3 odin for now on. The 4.3 Bootloader wont let you downgrade.
sswb27 said:
Yea, Stick with 4.3 odin for now on. The 4.3 Bootloader wont let you downgrade.
Click to expand...
Click to collapse
Thank you so much for that....I have tried to flash a few custom roms but I see there are some issues with certain parts of the phone if they are not 4.3 and above. Do you know of a good ROM that would work on my phone that has alot of customizing.....I'm a chick....so....In like to theme.....lol
I can't use anything from Team Dirt.....my phone won't load it....I have Dandroid on there now....but that is pretty much stock.....Tried StockRom custom.....but it never loaded the Aroma installer......it just sat there saying it was loading it...... Thanks again for all the help. :laugh:
jinx0117 said:
Thank you so much for that....I have tried to flash a few custom roms but I see there are some issues with certain parts of the phone if they are not 4.3 and above. Do you know of a good ROM that would work on my phone that has alot of customizing.....I'm a chick....so....In like to theme.....lol
I can't use anything from Team Dirt.....my phone won't load it....I have Dandroid on there now....but that is pretty much stock.....Tried StockRom custom.....but it never loaded the Aroma installer......it just sat there saying it was loading it...... Thanks again for all the help. :laugh:
Click to expand...
Click to collapse
Aroma is buggy, you just have to keep rebooting into recovery and keep trying, it will go. Some say it seems to work better without the usb plugged in.
As for team dirt I believe it is a aosp rom. If it is you will have to edit the updater script in the zip file so it know's your new 4.3 bootloader. META-INF>com>google>android>updater-script. If your on windows I suggest downloading notepad++ to edit the file. Just delete every thing down to where it
say's mount then save the file.
Update: I edited the updater for you https://www.dropbox.com/s/xucl47rh1wxg9rt/updater-script
Just put it in the zip file where I told you above, save and copy it to the zip and flash away.
sswb27 said:
Aroma is buggy, you just have to keep rebooting into recovery and keep trying, it will go. Some say it seems to work better without the usb plugged in.
As for team dirt I believe it is a aosp rom. If it is you will have to edit the updater script in the zip file so it know's your new 4.3 bootloader. META-INF>com>google>android>updater-script. If your on windows I suggest downloading notepad++ to edit the file. Just delete every thing down to where it
say's mount then save the file.
Update: I edited the updater for you https://www.dropbox.com/s/xucl47rh1wxg9rt/updater-script
Just put it in the zip file where I told you above, save and copy it to the zip and flash away.
Click to expand...
Click to collapse
Wow!!!! Thank you sooooo much....I admit I don't know it all just enough to be dangerous....but I am always willing to learn.....thank you so much for doing that for me....that was really awesome of you......
jinx0117 said:
Wow!!!! Thank you sooooo much....I admit I don't know it all just enough to be dangerous....but I am always willing to learn.....thank you so much for doing that for me....that was really awesome of you......
Click to expand...
Click to collapse
Well, this is the place to learn. We are all here to help each other, that's why i love android.:highfive:
Just use that thanks button to people that help you is all we ask in return.

N7100 Soft Brick

my phone is softbricked in recovery show a message "error mount /data" i have tried to flash with odin but nothing... i can't full wipe because it reboot
Shady95
what you said does not make any sense. Be kind enough to explain the issue properly. If we dont understand, how can we help you?
Sent from my GT-N7100 using Tapatalk
ceomaverick said:
Shady95
what you said does not make any sense. Be kind enough to explain the issue properly. If we dont understand, how can we help you?
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
My phone is in bootloop, i tried flash 4.3 with odin but is still bricked, i also tried to flash CWM and from recovey flash PhantomRom but when aroma start the phone reboot.
Shady95 said:
My phone is in bootloop, i tried flash 4.3 with odin but is still bricked, i also tried to flash CWM and from recovey flash PhantomRom but when aroma start the phone reboot.
Click to expand...
Click to collapse
Well, thr can only be two possibilities.
Case 1: You have a 4.4.2 bootloader. This bootloader does not accept 4.3 install from PC ODIN. You will have to flash 4.4 kitkat to get your phone running. Later you can downgrade to 4.3 if you want via mobile ODIN.
Case 2: If that does not work, your phone needs a repair.
On the sideline, before case 2, you can try and install Dr. Ketan's ROM by strictly following the install procedure outlined by him. If that goes into bootloop, your phone needs repair.
Sent from my GT-N7100 using Tapatalk

[Q] Samsung Note 2 N7100 Soft-Bricked (Solutions not working)

My Samsung note 2 won't move from the boot screen. It does boot into recovery when I press the buttons but it won't mount any files. Sideloading works through ADB but then that's just about it as it gives me errors. Tried to use Odin to unbrick it but it keeps giving me errors. What do I do? How do I unbrick my phone? I have posted a screenshot of the errors I am getting. Can someone please advise on what I should do?
boshez said:
My Samsung note 2 won't move from the boot screen. It does boot into recovery when I press the buttons but it won't mount any files. Sideloading works through ADB but then that's just about it as it gives me errors. Tried to use Odin to unbrick it but it keeps giving me errors. What do I do? How do I unbrick my phone? I have posted a screenshot of the errors I am getting. Can someone please advise on what I should do?
Click to expand...
Click to collapse
I have almost a same situation here with my brothers phone. I don't know why, but every time he manages to brick it like that. When booting into recovery from rom (power menu), it crashes the phone and it gets in a bootloop trying to get into the recovery.
What I did:
- Reflash recovery through odin (odin succes, phone fail)
- Reflash recovery through odin and erase nand (same...)
The only fix I found was to flash the stock rom and nand erase through odin, then flash the recovery (twrp 2.8.6.0), erase almost everything (sys, data, cache) and flash custom rom.
Looking at your pic, after nand write it fails, it could be that your nand chip is dead, and if it is like that, move to an other phone, it isn't worth to get a new mobo for your phone, those things cost more than 100 euro and a great new phone would get about 250 from you (like that asus zenfone, I think that is the one you should aim for if you want mid class to high class phones)
boshez said:
My Samsung note 2 won't move from the boot screen. It does boot into recovery when I press the buttons but it won't mount any files. Sideloading works through ADB but then that's just about it as it gives me errors. Tried to use Odin to unbrick it but it keeps giving me errors. What do I do? How do I unbrick my phone? I have posted a screenshot of the errors I am getting. Can someone please advise on what I should do?
Click to expand...
Click to collapse
The firmware you trying to flash xxalj3 (saw at screenshot) is very old 4.1.1 with sds bug also. Probably your phone has newer bootloader and 4 this you can't flash it, download latest firmware from Sammy and try again.
Sent from my GT-N7100
So I found out that my phone went through SDS. Had to get a new eMMC chip. the imei number got screwed up as well.
boshez said:
So I found out that my phone went through SDS. Had to get a new eMMC chip. the imei number got screwed up as well.
Click to expand...
Click to collapse
Sorry to hear this.
Sent from my GT-N7100
vagsvag said:
Sorry to hear this.
Sent from my GT-N7100
Click to expand...
Click to collapse
Got my phone to start working again after I installed a new eMMC. However when I updated it to a 4.4.2 Stock ROM, it won't register on to the network.
boshez said:
Got my phone to start working again after I installed a new eMMC. However when I updated it to a 4.4.2 Stock ROM, it won't register on to the network.
Click to expand...
Click to collapse
Your imei is normal or something 0004....? Corrupted general imei
Sent from my GT-N7100
vagsvag said:
Your imei is normal or something 0004....? Corrupted general imei
Sent from my GT-N7100
Click to expand...
Click to collapse
IMEI is the same as the one on the phone. I believe I must have installed the wrong ROM. I installed the N7100XXUFNL1 one which said Pakistan but then now that I checked it again, I found out it was for Nigeria, UAE, etc (which share the same CSC). Now I am downloading the N7100XXUFND4 one. Hope it makes a difference. I did backup my IMEI etc incase there is an issue.
boshez said:
IMEI is the same as the one on the phone. I believe I must have installed the wrong ROM. I installed the N7100XXUFNL1 one which said Pakistan but then now that I checked it again, I found out it was for Nigeria, UAE, etc (which share the same CSC). Now I am downloading the N7100XXUFND4 one. Hope it makes a difference. I did backup my IMEI etc incase there is an issue.
Click to expand...
Click to collapse
Samsung had made efs partition update when released 4.3 if I remember well. This update was making by the kernel when was flashing the fw was updating the efs too. If you haven't flash original firmware via odin 4.3 or later probably your efs is not updated. Try to flash original fw via odin, I think it will work.
Sent from my GT-N7100

Bootloop after Bootloader update

I restored to 5.1.1 BPA1 and updated to the new CPD1, re rooted and unlocked bootloader, now its stuck in bootloop and when i go to download mode and plug in the phone, the computer doesnt know the phones plugged in.
deershoot3r said:
I restored to 5.1.1 BPA1 and updated to the new CPD1, re rooted and unlocked bootloader, now its stuck in bootloop and when i go to download mode and plug in the phone, the computer doesnt know the phones plugged in.
Click to expand...
Click to collapse
Did you wipe in recovery? Did you remove sd card?
Sent from my SM-N920F using Tapatalk
homephysician said:
Did you wipe in recovery? Did you remove sd card?
Sent from my SM-N920F using Tapatalk
Click to expand...
Click to collapse
Yes i did, took a few reboots by pulling the battery but finally it fixed itself. Thanks tho
deershoot3r said:
I restored to 5.1.1 BPA1 and updated to the new CPD1, re rooted and unlocked bootloader, now its stuck in bootloop and when i go to download mode and plug in the phone, the computer doesnt know the phones plugged in.
Click to expand...
Click to collapse
When you updated to CPD1, did you load the stock ROM via Odin, or???

Categories

Resources