Hello guys
It is my first post so excuse my bad english.
I want to ask you if somewone used this aplication for trim suport.
In the aplication review sead that if the phone model is not compatible can brick the phone.
So is Ascend P6 compatible with this aplication or not?
On the other hand what type o memory module is used as system memory?
Thanks in advance for the answers.
savudragosh2 said:
Hello guys
It is my first post so excuse my bad english.
I want to ask you if somewone used this aplication for trim suport.
In the aplication review sead that if the phone model is not compatible can brick the phone.
So is Ascend P6 compatible with this aplication or not?
On the other hand what type o memory module is used as system memory?
Thanks in advance for the answers.
Click to expand...
Click to collapse
I think it requires some sort of kernel support for TRIM, which the huawei kernel obviously doesn't have...
tauio111 said:
I think it requires some sort of kernel support for TRIM, which the huawei kernel obviously doesn't have...
Click to expand...
Click to collapse
Thank you for the answer.
The other important question is: ascend p6 comes with eMMC technology or flash, for the system memory?
If we have eMMC (and we should have because it wase released in the second half of 2013) the Trim suport in kernel should be a must have; i think.
Thank you in advance for your answers.
savudragosh2 said:
Thank you for the answer.
The other important question is: ascend p6 comes with eMMC technology or flash, for the system memory?
If we have eMMC (and we should have because it wase released in the second half of 2013) the Trim suport in kernel should be a must have; i think.
Thank you in advance for your answers.
Click to expand...
Click to collapse
Samsung KMVUS000LM-B304 252 chip is used for memory I believe, but I can't find any information of it being either eMMC or flash. I attatched a picture which has the word "Flash" in it, so it may actually be a flash memory. Nonetheless TRIM support came with 4.3, P6 launched with 4.2.2, and altough we have a 4.4.2 beta, the changes in the kernel have been very minimal. Unless they build a new kernel from scratch (which I doubt highly), the TRIM support wont be there. I also believe the K3V2oem1 kernel wont be updated much, so we have to rely on the K3V2+ kernel source, with some modifications, if it gets released and updated to a newer linux kernel version.
tauio111 said:
Samsung KMVUS000LM-B304 252 chip is used for memory I believe, but I can't find any information of it being either eMMC or flash. I attatched a picture which has the word "Flash" in it, so it may actually be a flash memory. Nonetheless TRIM support came with 4.3, P6 launched with 4.2.2, and altough we have a 4.4.2 beta, the changes in the kernel have been very minimal. Unless they build a new kernel from scratch (which I doubt highly), the TRIM support wont be there. I also believe the K3V2oem1 kernel wont be updated much, so we have to rely on the K3V2+ kernel source, with some modifications, if it gets released and updated to a newer linux kernel version.
Click to expand...
Click to collapse
Hello and thank you again for the answers.
For what i can see in the picture the one in the middle is the memory card. It says SAMSUNG that means that it is a quality chip because for what i now samsung fabrics he's one memory chips. I will dig more hopping to gather more informations.
The main question remains: Has anyone used the softwere LAGFIX with ascend P6 without any problems?
I found this, maybe you can make more sense of it.
i found more about the chipset:
savudragosh2 said:
i found more about the chipset:
Click to expand...
Click to collapse
This seems interesting, it could aswell be an eMMC since it has ram inside the chip.
But something is wrong with the kernel of P6. Try Androbench and try taking the Micro test in there. I got only 20mb/s!!! (G2 and other devices get well over 110mb/s, hell, even the Galaxy S2 gets more than 2x faster rates!).
Highly possible that the chip needs TRIM, but unfortunately we have no way to enable it yet.
tauio111 said:
This seems interesting, it could aswell be an eMMC since it has ram inside the chip.
But something is wrong with the kernel of P6. Try Androbench and try taking the Micro test in there. I got only 20mb/s!!! (G2 and other devices get well over 110mb/s, hell, even the Galaxy S2 gets more than 2x faster rates!).
Highly possible that the chip needs TRIM, but unfortunately we have no way to enable it yet.
Click to expand...
Click to collapse
For what i read a eMMc can be trim in 2 ways
First with a build in system suport like JB 4.3 or KK
Second with a build app like LAGFIX manually.
I want to try thos app but i can brick the phone. I am in mutch doubt.
I am confused about there policy because what are whe traing to understend is normal for a bettter performance and a musthave of a healty system beased on this type of memory for storage.
Sorry again for the gramatical mistakes.
I found a clasification table on samsung website and the chip is in thr lower class 100 suitable for poor quality smartphones with dual core.
Maybe here is the reason for the poor performance despite the quad ore and 2gb off RAM.
If you have time please do a search on samsung website for the cip. It is a pdf presentation but it is large and i cant uploded.
specifications of the KMVUS000LM memory chip.
I found some specifications (marked with red). If we have some other chip specifications like S3 or nexus 4 (phone close to performance too ourse) then we can figure out if it is poor performane chip or it is a bad made kernel.
Hope that someone can figure it out.
I runned the LAGFIX aplication afterall. Unfortunelly doesn't work on our device, because of bad kernel suport or hardwere. I runned also ANDROBENCH: and got a sequential read/write 26.9Mb/s / 6.38Mb/s. VEEEEEEEEEEEERY LOW compared with other devices.
I AM VERY DISSAPOINTED ABOUT HUAWEI. Very good specs on paper but dissaponting components/kernel support in reality.
When HUAWEI will release the source code you will be able to try any custom kernel, I'm sure someone will make one, there are a few already, but not so good due to HUAWEI's restriction.
ZuperStyler said:
When HUAWEI will release the source code you will be able to try any custom kernel, I'm sure someone will make one, there are a few already, but not so good due to HUAWEI's restriction.
Click to expand...
Click to collapse
Thank you for the answer.
Do you think it is a kernel issue or a slow performance memory card?
savudragosh2 said:
Thank you for the answer.
Do you think it is a kernel issue or a slow performance memory card?
Click to expand...
Click to collapse
Definitely a kernel issue
savudragosh2 said:
Thank you for the answer.
Do you think it is a kernel issue or a slow performance memory card?
Click to expand...
Click to collapse
I also think that this is a kernel issue, appearantly their kernel includes tons of useless parts and tons of parts that dont work well.
But I dont think that a new kernel would make it much faster probably like ~50mb/s
tauio111 said:
I also think that this is a kernel issue, appearantly their kernel includes tons of useless parts and tons of parts that dont work well.
But I dont think that a new kernel would make it much faster probably like ~50mb/s
Click to expand...
Click to collapse
Thank you for your asnwer,
I put a question in OMNIROM treath but no one answered. The question is: Has Omnirom (because in kitkat based) the suport of TRIM?
I asked you because i saw you use omnirom.
And another qiuestion: From what i saw huawei released the kernel source for B111. If it is such a bad kernel why did no one develope it?
savudragosh2 said:
Thank you for your asnwer,
I put a question in OMNIROM treath but no one answered. The question is: Has Omnirom (because in kitkat based) the suport of TRIM?
I asked you because i saw you use omnirom.
Click to expand...
Click to collapse
It does not as I said before. We dont have the KitKat kernel source code yet.
savudragosh2 said:
And another qiuestion: From what i saw huawei released the kernel source for B111. If it is such a bad kernel why did no one develope it?
Click to expand...
Click to collapse
surdu made a green kernel. We dont have any skilled kernel devs here + driver sourcecodes are still not released and probably wont be, without driver sourcecode, kernel version can't be updated and we will have to sit on 3.0.8 till the end, sadly.
As per title, I would like to know the VOOC charging can blend well with custom rom right ? Because it detect the hardware but not the software nor the kernel I guess. Any one can tell me the exact one ?
Yes, it'll work
mR.[hyDe] said:
As per title, I would like to know the VOOC charging can blend well with custom rom right ? Because it detect the hardware but not the software nor the kernel I guess. Any one can tell me the exact one ?
Click to expand...
Click to collapse
VOOC is implemented by custom hardware and the kernel, and all custom projects properly rebased the kernel VOOC support onto whatever base they used.
Entropy512 said:
VOOC is implemented by custom hardware and the kernel, and all custom projects properly rebased the kernel VOOC support onto whatever base they used.
Click to expand...
Click to collapse
Thanks mate, one more question is that is that oppo device will show "relocked bootloader" like sony had did when u relock bootloader? The term relocked bootloader actually risk user in my country a lot
Hello,
I done everything. Installed BUSYBOX Pro . Tried DSPLOIT, ZANTI, WI.CAP. Any sniffers do not work on my device .
It is ROOTED 4.4.2 kitkat flashed wtih werewolf custom rom.
Can anyone help me to run apps like this?
Gradz,
Head16
Head16 said:
Hello,
I done everything. Installed BUSYBOX Pro . Tried DSPLOIT, ZANTI, WI.CAP. Any sniffers do not work on my device .
It is ROOTED 4.4.2 kitkat flashed wtih werewolf custom rom.
Can anyone help me to run apps like this?
Gradz,
Head16
Click to expand...
Click to collapse
Dude, seriously? If you don't see what's wrong with your question then you shouldn't be playing
with those things. Lot's of reading and learning must you do, hmmm?
Yoda
okay, slightly dickish answer sorry.
you need certain abilities enabled at the kernel/driver level for some of the things you want
to do. which maybe be as relatively simple as patching kernel source and rebuilding or may require
rev-eng'ing proprietary drivers/binaries additionally.
you may be better served to researched a device more naturally endowed with these capabilities,
alternately a device with usb-otg support so you can use a dongle device proven to be
capable of these tasks.
ommmm
So because i used custom rom, this apps does not working?
Head16 said:
So because i used custom rom, this apps does not working?
Click to expand...
Click to collapse
sort of yes/no because the custom rom contains the software and the kernel is a custom build
it does not necessarily mean that your hardware is capable [meaning the device's capability, the kernel
having the necessary code and if there are proprietary/prebuilt source code unavailable/ binaries and firmware
support files which need to be hacked/engineered.
find out the device id of your wifi hardware and search it's id/name along with the function you are trying to perform.
for example
bcm4334 monitor mode
use the search engine that works for you, read carefully and fully and get yourself trained to follow trails of related/seemingly related
information, no matter how obscure.
good luck, may the schwartz be with you ! :silly:
m
Hi folks,
wanted to ask if someone knows if it might be possible to enable Galileo support on Moto Z.
I am not a developer, but the Snapdragon 625 supports it, so maybe with some kind of modem modification or files from another Snapdragon 625 phone, they will work?
Thanks
Big chance to brick if you flash modem from another device.
dedraks said:
Big chance to brick if you flash modem from another device.
Click to expand...
Click to collapse
Thanks for the warning, I was not planning on doing that, just wondering if modem changes are needed and not only system changes
Good evening community, is there a way to modify the overclocking settings of both the CPU and GPU of a Snapdragon 665 with Ryzen Kernel? My device is a Redmi Note 8 on Miui EU (12.0.3.0 Android 10) but I want to see if I go to Pixel Experience. First of all I would like to make it known that I mainly seek to get something more out of the chip. Could you give me some recommendations before reaching out or warnings? Since the furthest I have come is just to flash Roms and root more I have not modified the kernel or other sections before, but I want to venture. I have Twrp (One for the device in question)
No, not possible.
Frequencies are locked by firmware
iamsaalim said:
Frequencies are locked by firmware
Click to expand...
Click to collapse
Is there a firmware that allows overclocking?
DumarC said:
Is there a firmware that allows overclocking?
Click to expand...
Click to collapse
Nope
Not for us atleast, no idea of other devices.