Develop Bugs

[ROM][KIW-L24] customrom.NOVA.Xposed.L24-B140

customrom.NOVA.Xposed.R5​
OK here's my Nova.Rom with the xposed framework and it's:
Deodexed
Debloated
No-Swap
zipalingned
Tethering is enabled
Boot Logo from @wickedesires - Busybox - Dolby Atmos - ES File Explorer - QuickBoot - SuperSU are installed
it's using the MM Icons from NOVA
I did not test any xposed apps but the framework is their and active
If you need the xposed uninstaller or updates their here >> http://forum.xda-developers.com/showthread.php?t=3034811 Thanks @rovo89
Download Here​
6 Apps need updating on install ...sorry forgot about that
I'll update this to B151 as soon as I get it
Note: If you don't see the new boot Logo try this
open your Terminal Emulator. At the $ prompt change into superuser mode by typing su and pressing Return/Enter. You will then get the # prompt.Type load_oemlogo press Return/Enter and several lines of text will display, when this stops exit out of Terminal Emulator.
REBOOT and enjoy your new boot logo.
Click to expand...
Click to collapse

Reserved

Nice work
Which tool you used to deodex the ROM ?
I tried SVADeodexer & Super Kitchen and both of them results in bootloop
Sent from my HUAWEI KII-L21 using Tapatalk

AL_IRAQI said:
Nice work
Which tool you used to deodex the ROM ?
I tried SVADeodexer & Super Kitchen and both of them results in bootloop
Sent from my HUAWEI KII-L21 using Tapatalk
Click to expand...
Click to collapse
batchapktool it's in the repository under xposed

I hope this doesnt install boot logo automatically, i made my own

Kennii said:
I hope this doesnt install boot logo automatically, i made my own
Click to expand...
Click to collapse
yes the custom boot logo is installed, it's simple to change

I was on CM13 and would like to try this rom, but when I flash it kicks me back to TWRP while trying to boot. Never had anything like this happen before. Im able to reflash CM13 and load it up fine.
Im trying now to flash my original backup and see what happens.

dashubernator said:
I was on CM13 and would like to try this rom, but when I flash it kicks me back to TWRP while trying to boot. Never had anything like this happen before. Im able to reflash CM13 and load it up fine.
Im trying now to flash my original backup and see what happens.
Click to expand...
Click to collapse
you will most likely need to return to stock, then factory reset and wipe / advanced / wipe internal storage to return to lollipop from MM

clsA said:
you will most likely need to return to stock, then factory reset and wipe / advanced / wipe internal storage to return to lollipop from MM
Click to expand...
Click to collapse
Thanks for the reply, that seemed to take care of it.

i wiped before and flashed and now im stuck on the honor for the brave screen ?
---------- Post added at 11:26 AM ---------- Previous post was at 11:02 AM ----------
on twrp i get cant mount system resource busy!

richielasalsa said:
i wiped before and flashed and now im stuck on the honor for the brave screen ?
---------- Post added at 11:26 AM ---------- Previous post was at 11:02 AM ----------
on twrp i get cant mount system resource busy!
Click to expand...
Click to collapse
if you see an error in TWRP about the system not mounted you need to reboot recovery and flash it again
you normally only get this if you did an advanced wipe and checked system or if you mounted system before flashing

customrom.NOVA.Xposed.KIW-L24.B140.R5.zip this gets stuck on boot but this worked customrom.Nova.KIW-L24.B140.zip

CM13 to Nova
I just came from CM13 to Nova and had same issues. You cant install from a zip if your coming from Marshmello. I had to first download a Twrp Backup.I used the stock one in repo. I copied the stock TWRP backup folder to Twrp/backup/(s/n folder of your phone)/stockhonor5x. Then boot to recovery and Click restore. Select stock folder. Then you can Install Nova zip. right on top.

richielasalsa said:
customrom.NOVA.Xposed.KIW-L24.B140.R5.zip this gets stuck on boot but this worked customrom.Nova.KIW-L24.B140.zip
Click to expand...
Click to collapse
I just did a factory reset and loaded the B140.R5 rom again .. it takes about 65 seconds to get to the honor screen then it takes another 5 - 10 min on the EMUI Optimizing system screen and then loads the lock screen.
It has xposed installed is why the first boot is slow

I need help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my KIW-L24 using XDA-Developers mobile app

david00000 said:
I need help
Sent from my KIW-L24
Click to expand...
Click to collapse
I solved my play store errors by changing sd cards and formatting it with the phone. also set storage to sd card and not internel
in the short term removing your play account and redoing it will fix it temporally
others have reported that unmounting the sd card and remounting it fixed it for them

Can someone who has used this rom tell me if it's significantly quickly than stock? The only mods I haven't done that are in this are zip align and no swap. If the difference is negligible I'll just stick with what I've got, otherwise I'm gonna try it out. Also, @clsA I've added several new boot animations and a few color variants of the splash screen if you want to add any of them.

wickedesires said:
Can someone who has used this rom tell me if it's significantly quickly than stock? The only mods I haven't done that are in this are zip align and no swap. If the difference is negligible I'll just stick with what I've got, otherwise I'm gonna try it out. Also, @clsA I've added several new boot animations and a few color variants of the splash screen if you want to add any of them.
Click to expand...
Click to collapse
their is no voodoo here, but the no-swap is the real speed boost along with the nova launcher
To me the xposed framework is useless, the R4 release is still my favorite

Rene
plz help sir, after flashing the zip file it keep rebooting to twrp

[6045][6.0.1][Stock-based] Project MATERIAL

Hello everyone!
I shall not complicate things! xD
I present to you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.
.
.
*What about the features?*
Phew!
*Now show them some screenshots.*
Oh yeah,screenshots,those things!
Instructions too?
*Yeah...*
PS. Not my problem if you get your head stuck in a toaster!
And then the download button,right?
*............*
Guys,there is no music player,so I warmly suggest you install Phonograph.
Also,my favorite launcher and also a suggestion,ASAP Launcher
I FORBID anyone to use the wallpaper or any other thing I had my hands in WITHOUT MY PERMISSION in their work.
​
XDA:DevDB Information
Project MATERIAL, ROM for the Alcatel Onetouch Idol 3
Contributors
The Marionette
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Beta
Created 2016-07-13
Last Updated 2016-07-13

Reserved
1. In order to root the device,you need to download the latest version of SuperSU BETA:
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
or if that doesn't work,download the 2.74 version:
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip
Then enter TWRP and write this in the terminal:
Code:
echo SYSTEMLESS=true >> /data/.supersu
After doing that,flash the SuperSU zip.
2. Aaaaaaaand,for those who want dual sim enabled,flash this right after flashing the rom!
DOWNLOAD
3. Also,if you want to make sure your LTE/dual sim truly works,flash the variant-specific modem zip by famewolf!
Grab yours HERE
4. Not to mention the optional flashable zips of removed Alcatel apps(their icons have been themed into Material Design icons,do not fret! )
DOWNLOAD
5. Those who lost WIFI have to wipe everything(except the storage,of course),flash THIS zip and then flash the rom!
6. Repeating myself,but anyhow,here is a link to the post by famewolf for those who want to switch between fastboot capability and MM!
HERE​

Looks great. Download link?
Plus, I agree - ASAP Launcher rocks.
Sent from my 6045X using Tapatalk

The Marionette said:
In order to root the device,you need to download the altest version of SuperSU BETA:
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Then enter TWRP and write this in the terminal:
Code:
echo=SYSTEMLESS=true >> /data/.supersu
After doing that,flash the SuperSU zip.
Aaaaaaaand,for those who want dual sim enabled,flash this right after flashing the rom!
https://www.androidfilehost.com/?fid=24591000424946905
Also,if you want to make sure your LTE/dual sim truly works,flash the variant-specific modem zip by famewolf!
Grab yours HERE​
Repeating myself,but anyhow,here is a link to the post by famewolf for those who want to switch between fastboot capability and MM!
Aaaaaand,to be able to switch between fastboot capabilities and MM,go HERE[/B]
Click to expand...
Click to collapse
Good Job!
EDIT:Analyzed your DualSim.zip
Looks Like that you messed up with uploading..
Why are you adding folders which don't need and in your updater script there's lines to delete system apps.

Yeah. Looks awesome. A rom refined.
GAPPS included ? Seems yes in the screens, but never know. Thanks you @The Marionette for providing us such great work.
Also, as I've lost a few the discussion thread & issue with MM dev : My phone is 6045Y, in Europe. May I get problem with LTE or data network with that rom ? Also, would I be able to restore as usual if something goes wrong ?
Sorry if that has already been discussed, but so many answers about this, I couldn't stay up to date, above all when you're not spending your life on forums.

frankee207 said:
Yeah. Looks awesome. A rom refined.
GAPPS included ? Seems yes in the screens, but never know. Thanks you @The Marionette for providing us such great work.
Also, as I've lost a few the discussion thread & issue with MM dev : My phone is 6045Y, in Europe. May I get problem with LTE or data network with that rom ? Also, would I be able to restore as usual if something goes wrong ?
Sorry if that has already been discussed, but so many answers about this, I couldn't stay up to date, above all when you're not spending your life on forums.
Click to expand...
Click to collapse
Yep,yep,gapps are inside the rom.
As for LTE,look at the second post,I added a link to famewolfs variant specific modem download folder. Just flash the one for your variant before flashing the rom!
You can always restore over TWRP or over Mobile Upgrade Q,no need to worry. U.U

The Marionette said:
Yep,yep,gapps are inside the rom.
As for LTE,look at the second post,I added a link to famewolfs variant specific modem download folder. Just flash the one for your variant before flashing the rom!
You can always restore over TWRP or over Mobile Upgrade Q,no need to worry. U.U
Click to expand...
Click to collapse
OK
Yeah, just saw the link. How stupid I am
flash Before ? Not after ?

frankee207 said:
OK
Yeah, just saw the link. How stupid I am
flash Before ? Not after ?
Click to expand...
Click to collapse
Emm,for my 6045K,I flashed the modem zip before flashing the rom.

Alek Dev said:
Good Job!
EDIT:Analyzed your DualSim.zip
Looks Like that you messed up with uploading..
Why are you adding folders which don't need and in your updater script there's lines to delete system apps.
Click to expand...
Click to collapse
I made a universal flashable zip,and then I just add/remove files. Those empty folders don't affect anything as long as I don't put an app in them. You don't need to worry.

The Marionette said:
I made a universal flashable zip,and then I just add/remove files. Those empty folders don't affect anything as long as I don't put an app in them. You don't need to worry.
Click to expand...
Click to collapse
i send you Pm but anyway you reply here But updater script delete System Apps look it....
delete("/system/build.prop");
delete_recursive("/system/app/Browser");
delete_recursive("/system/app/Compass");
delete_recursive("/system/app/HoloSpiralWallpaper");
delete_recursive("/system/app/Newsstand");
delete_recursive("/system/app/TctCalculator");
delete_recursive("/system/app/TctNote");
delete_recursive("/system/app/TctWeather");
delete_recursive("/system/priv-app/Calendar");
delete_recursive("/system/priv-app/Dialer");
delete_recursive("/system/priv-app/DownloadProvider");
delete_recursive("/system/priv-app/Gallery");
delete_recursive("/system/priv-app/GalleryNext");
delete_recursive("/system/priv-app/JrdFota");
delete_recursive("/system/priv-app/JrdTag");
delete_recursive("/system/priv-app/Launcher");
delete_recursive("/system/priv-app/Mms");
delete_recursive("/system/priv-app/Music");
delete_recursive("/system/priv-app/MusicFX");
delete_recursive("/system/priv-app/Settings");
delete_recursive("/system/priv-app/TctCamera");
delete_recursive("/system/priv-app/TctEmail");
delete_recursive("/system/priv-app/TctExchange");
delete_recursive("/system/priv-app/TctFileManager");
delete_recursive("/system/priv-app/TctFMRadio");
delete_recursive("/system/priv-app/TctSoundRecorder");
delete_recursive("/system/priv-app/TimeTool");
delete("/system/media/shutdownanimation.zip");
delete("/system/media/audio/switch_on_off/Jumping_off.ogg");
delete("/system/media/audio/switch_on_off/Jumping_on.ogg");

Alek Dev said:
But updater script delete System Apps look it....
Click to expand...
Click to collapse
Woops,the wrong zip was modified! xD

Doesn't matter when you flash the modem zips as long as it's AFTER You've run mobile Q, the panasonic eluga software or you've flashed a rom that clobbered your radio.

Fixed the DUAL SIM zip. xD

The Marionette said:
Fixed the DUAL SIM zip. xD
Click to expand...
Click to collapse
Good....Little Suggestion.....It will be good to remove the partitions from ZIp which we don't need it ...To don't replace their modems..
Editn dialer doesn't works Reversible option...I had the same issues on SPB ROM so i think the problem it's changing icons.....
Edit1anorama crashes....
Edit2:There's Music app on Build...
Edit 3:It's really faster... but Sometimes apps like Tapatalk.Fb are crashing

New build online,the quirks(broken music player was still there,something needed to be left out of the zip)
Test it out and report back.
https://www.androidfilehost.com/?fid=24591000424946929

Was just about to flash v1, but I'll try out v2 instead. Downloading it right now.

So, theres no root access.

jerpd3rp said:
So, theres no root access.
Click to expand...
Click to collapse
Did you not read post #2?
http://forum.xda-developers.com/showpost.php?p=67731851&postcount=2

Welp I booted up and everything seems to be working as it should. I'm going to root and use systemless xposed and see what happens.
Update: For some reason supersu didn't flash as systemless even after doing the command in terminal so I'm starting over, but the v2 rom itself booted up just fine.

Welp v2 no issues, rooted/xposed systemless using v85.7 since 86.1 wasn't recognized by the xposed installer even though it installed systemless with no issues twice. Gonna see how long the battery lasts and thank you @The Marionette

[APK] (NON-ROOT) -Injected YouTube- (Background and screen off playback) [STOCK-LOS]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
•WHAT IS THIS?
This is a modded version of the original YouTube app that:
• Enables background / screen-off playback
• Removes ads (now in stock Motorola's rom too!) (thanks to @arter97)
•INSTRUCTIONS:
• UNINSTALL EXISTING YOUTUBE if you have it. Recommend using one of the many system apps Uninstallers that you can find on the play store, or a file manager that can delete from /system/app
Note: In the updates, if you are using Substratum to theme YouTube (especially if using Substratum's legacy mode), you may have to remove overlay first prior to updating. Otherwise, YouTube will crash immediately when opening. How to do that? See here.
*For more info go to the ORIGINAL THREAD.
•DOWNLOADS:
>>DOWNLOAD FOLDER (Click here!)<< [Enter to the NON-ROOT folder to get the non root version]
* The only differences between each one of the versions in the linked folder are the interface colours, choose the one that you want.
•INSTALLATION:
1) Download and install YouTube_v1*.*.*(minAPI16-nodpi-noarch-nonroot-v*.*)(**-**-v*.*)-vanced-vp9-backgroundplayback.apk) located in 12.**.**/ NON-ROOT-VERSION-BY-LAURA-ALMEIDA.
>>DOWNLOAD FOLDER (Click here!)<< [Enter to the NON-ROOT folder to get the non root version]
* The only differences between each one of the versions in the linked folder are the interface colours, choose the one that you want.
2) Download and Install MicroG_for_iYTBP_v*.*.*.apk.
Credits & special thanks to: @laura almeida and @ZaneZam.
Bugs / limitations:
- None (last tested version: 12.34.55).
Date: 13/09/17.
Credits & thanks:
@laura almeida - (Vanced team)
@Master_T - (Orginal iYTBP)
@ZaneZam - (Vanced team)
@Razerman - (Vanced team)
@arter97
*Let me know if someone involved into this project is missing in credits.
Thread updated: 14-Sep-2017

much thx for this.It worked on ressuraction remix (Moto g4 plus).
Will there be updates in this thread ?

majo3000 said:
much thx for this.It worked on ressuraction remix (Moto g4 plus).
Will there be updates in this thread ?
Click to expand...
Click to collapse
Yes, i will update the link in OP when the dev upload new versions to his thread.

Ty!

I installed it but the homepage keeps on loading.Is there anything i can do to fix this.

yeah this is considered warez i think

This is what I missed most about Xposed. Thank you.

jerpd3rp said:
yeah this is considered warez i think
Click to expand...
Click to collapse
Hi sheriff,
I don't think so, go to the ORIGINAL thread for more info.
This mod is based upon the source code of the following xPosed module:
http://repo.xposed.info/module/com.pyler.youtubebackgroundplayback
All credits for the research behind this go to the authors of the module.
I merely "ported" it to the original YouTube APK for all the people that don't have xPosed.
Why does this exist?
Because not everyone has xPosed, especially now that Nougat is starting to spread to more and more devices
Click to expand...
Click to collapse

Update (02-7-2017):
YouTube_v12.23.60(nodpi).apk: 12.23.60 YT version.
-Install as a normal APK, NO ROOT required.
DOWNLOAD HERE YouTube_v*.*.*(nodpi).apk [apk VERSION and NO ROOT required!]
* You can get themed versions of the apk (grey-black and red-black) in the above link. All the credits go to: ZaneZam and laura almeida for this version.

Asish.pradhan said:
I installed it but the homepage keeps on loading.Is there anything i can do to fix this.
Click to expand...
Click to collapse
If you are using Substratum to theme YouTube (especially if using Substratum's legacy mode), you may have to remove overlay first prior to updating. Otherwise, YouTube will crash immediately when opening.
Try with the new version, just install as a normal .APK, report if this worked.

moonlightdrive said:
Update (02-7-2017):
YouTube_v12.23.60(nodpi).apk: 12.23.60 YT version.
-Install as a normal APK, NO ROOT required.
DOWNLOAD HERE YouTube_v*.*.*(nodpi).apk [apk VERSION and NO ROOT required!]
* You can get themed versions of the apk (grey-black and red-black) in the above link. All the credits go to: ZaneZam for this version.
Click to expand...
Click to collapse
thx but to be correct for the themed and non root versions we should rather thank and give credits to @laura almeida as this work is done by her we "just share our resources" these days but u surely read already about
that in original thread, second post. so there is something missing in the credits.

ZaneZam said:
thx but to be correct for the themed and non root versions we should rather thank and give credits to @laura almeida as this work is done by her we "just share our resources" these days but u surely read already about
that in original thread, second post. so there is something missing in the credits.
Click to expand...
Click to collapse
Corrected, @laura almeida added to the credits in OP, thanks you both for the amazing job.:good:

I have two problems, with the zip file, after flashing I open YT and the background play works but the ads stills there and worst, I can't skip it after the five seconds. In the non-root apk, when I install the microG and sign me up, the YT app crashes and doesn't let me open it, I don't know what I'm doing wrong ):

champagne66601 said:
I have two problems, with the zip file, after flashing I open YT and the background play works but the ads stills there and worst, I can't skip it after the five seconds. In the non-root apk, when I install the microG and sign me up, the YT app crashes and doesn't let me open it, I don't know what I'm doing wrong ):
Click to expand...
Click to collapse
That's very strange (the ads thing), it never happened to me, actually, works pretty well the .ZIP version. Regarding to microG, to be honest, i never used it.
I tested the non-root version [grey & black] (i am using it, right now), and i haven't faced any issues so far, everything works as expected.
Since i am not the developer of any of these apk's (i just created the flashable zip option) i suggest you to go to the original thread (located HERE) see: main thread and posts #2 & #3.
If you have Magisk (suggested: beta v13.0), in the post #3, you will find the ZaneZam and laura almeida version (non-root) ported into a magisk module. I didn't post it to the main thread because i haven't tested the Magisk version.

@moonlightdrive hey thanks for this! it works! I tried other mods they just refuse to work! but yours is a different story! thanks a bunch!
i got a suggestion.. can you make a themed version? i need a black one... because i always watch youtube at night and the white theme really burns my eyes..
i know i can download zanezam version but his non root version uses different package name (and causes problems on chromecast detection)
and his root version doesnt remove ads (yes i installed using his instruction using his flashable zip)
thanks :good:

robert1337 said:
@moonlightdrive hey thanks for this! it works! I tried other mods they just refuse to work! but yours is a different story! thanks a bunch!
i got a suggestion.. can you make a themed version? i need a black one... because i always watch youtube at night and the white theme really burns my eyes..
i know i can download zanezam version but his non root version uses different package name (and causes problems on chromecast detection)
and his root version doesnt remove ads (yes i installed using his instruction using his flashable zip)
thanks :good:
Click to expand...
Click to collapse
Hi mate, you're welcome!.
I started using this version YouTube_v12.23.60(nodpi)(Grey_Black_v1.1).apk since a couple of days ago, i checked and effectively his package name was modified to 'com-lara-android.youtube', anyway, it's working as expected so far, when i connect my device to Chromecast via youtube app it works as normal.
i am using a Google Chromecast 2 (not enrolled into beta testing software program).
The version of the app that i am currently running it's the Grey and Black v1.1 (by ZaneZam & laura).
Please, give it a shot to prove if with this version you have the same troubles with Chromecast.
I am on Invicta OS 4.2 (LineageOS based rom) with Open-GAPPS Pico and rooted with Magisk v13.

Hello, I downloaded the apk yesterday and since then It doesn't let me sign in, is there a way to fix that?

ascii024 said:
Hello, I downloaded the apk yesterday and since then It doesn't let me sign in, is there a way to fix that?
Click to expand...
Click to collapse
Hi, wich version did you download?, are you on custom or stock rom?
If you have root, install the last ZaneZam's version (from yesterday 7/Jul/2017). Assuming that you are running on a custom rom.
Download: youtube_12.25.52-1225523300_minAPI21(armeabi-v7a)(nodpi)-adaway-backgroundplayback.apk.
Installation:
With your prefered file manager (and root permissions), do the following:
Paste the .apk file to /system/app
Give 644 permissions to it, in /system/app/name-of-the-app.apk
* You can give permissions with any terminal emulator or ADB interface.
ADB:
- adb root
- adb shell chmod 644 /system/app/name-of-the-app.apk
- adb reboot
Click to expand...
Click to collapse
Terminal:
- su
- chmod 644 /system/app/name-of-the-app.apk
- reboot
Click to expand...
Click to collapse
* If you are on stock Motorola's rom, go to the thread description and search for the stock rom version (i updated the links a minits ago).

moonlightdrive said:
Hi, wich version did you download?, are you on custom or stock rom?
Click to expand...
Click to collapse
Have the 12.23.60 version, just tried to install the one you gave me, says it's corrupt when trying to install. Currently using latest LineageOS ROM.

ascii024 said:
Have the 12.23.60 version, just tried to install the one you gave me, says it's corrupt when trying to install. Currently using latest LineageOS ROM.
Click to expand...
Click to collapse
Follow the installation steps descripted in my previous answer. You can't install this app like a normal app, just follow the steps of putting the apk manually into your system.

Stock rom 4.16 and update package 5.06（android8.1）

Nubia UI v4.16 https://1drv.ms/u/s!AqD4NQPahcDKhkLOwY7JdwgW1csH
and the beta version Nubia UI v506 based android8.1 https://drive.google.com/file/d/1lalt4mZAx6x2GKws7OYvECzso7XDPuAp/view?usp=sharing
--------first update to Nubia UI v4.16
--------update to Nubia UI v506
recovery-3.2.1-nx563j_7.x-8.x https://drive.google.com/file/d/1I5lrwwKKFKlE3LFf1Xh1p4GeU6ZW3Dy-/view?usp=sharing
please delete fingerprint and re-add

failed update via twrp...
Error : 7
EDIT :
Flash via updater ===> SUCCEED

diiikaaaa said:
failed update via twrp...
Error : 7
EDIT :
Flash via updater ===> SUCCEED
Click to expand...
Click to collapse
Does all work?
I think you are right as it is the pre-released stock rom, it should upgrade from 4.16.

you can flash it directly from TWRP if you remove from the updater script of the 4.16-5.06 zip file all thel lines before this statement: # ---- start making changes here
It works.
I've attached here below a working script.

kenzo_cz said:
Nubia UI v4.16 https://1drv.ms/u/s!AqD4NQPahcDKhkLOwY7JdwgW1csH
and the beta version Nubia UI v506 based android8.1 https://1drv.ms/u/s!AqD4NQPahcDKhkBLpdIj5OC3OKVT
--------first update to Nubia UI v4.16
-------- flash the Nubia UI v506 by TWRP https://1drv.ms/u/s!AqD4NQPahcDKhj7OCrH2a1qL7_eW
Click to expand...
Click to collapse
Hi there
How about Gapps? Could you install them in this ROM? If yes, how can you do it?
Thanks

Zenuno said:
Hi there
How about Gapps? Could you install them in this ROM? If yes, how can you do it?
Thanks
Click to expand...
Click to collapse
I managed to install opengapps full by removing some apps with the aid of the gapps-config.txt file (otherwise system partition is too little - just check how to use it in the OpenGapps wiki). Then I disabled SetupWizard.apk renaming it SetupWizard.sav in /system/priv-apps via TWRP and adb (the nubia setup wizard does not start if the google setup wizard is active). Finally I rebooted and added my google account. So far, so good.

Topogigi said:
I managed to install opengapps full by removing some apps with the aid of the gapps-config.txt file (otherwise system partition is too little - just check how to use it in the OpenGapps wiki). Then I disabled SetupWizard.apk renaming it SetupWizard.sav in /system/priv-apps via TWRP and adb (the nubia setup wizard does not start if the google setup wizard is active). Finally I rebooted and added my google account. So far, so good.
Click to expand...
Click to collapse
How about Magisk?

Topogigi said:
I managed to install opengapps full by removing some apps with the aid of the gapps-config.txt file (otherwise system partition is too little - just check how to use it in the OpenGapps wiki). Then I disabled SetupWizard.apk renaming it SetupWizard.sav in /system/priv-apps via TWRP and adb (the nubia setup wizard does not start if the google setup wizard is active). Finally I rebooted and added my google account. So far, so good.
Click to expand...
Click to collapse
First of all, thank you for sharing your experiences on this rom.
Do you use Superuser or Magisk to root? I want to use Magisk to root device. By use of your updater script, we should be able to flash three zip at same time in TWRP
- 4.16 flashable zip
- 5.06 update zip
- Magisk.zip
Do you think it works?

kenzo_cz said:
Nubia UI v4.16 https://1drv.ms/u/s!AqD4NQPahcDKhkLOwY7JdwgW1csH
and the beta version Nubia UI v506 based android8.1 https://1drv.ms/u/s!AqD4NQPahcDKhkBLpdIj5OC3OKVT
--------first update to Nubia UI v4.16
--------update to Nubia UI v506
please delete fingerprint and re-add
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

backboycn said:
First of all, thank you for sharing your experiences on this rom.
Do you use Superuser or Magisk to root? I want to use Magisk to root device. By use of your updater script, we should be able to flash three zip at same time in TWRP
- 4.16 flashable zip
- 5.06 update zip
- Magisk.zip
Do you think it works?
Click to expand...
Click to collapse
I did it the same way. Four zips in a row (including gapps modified accordingly my previous post). Then I rebooted. BTW, I use magisk
Uh oh, it seems I spoke too early....Magisk manager installs fine but it does not allow to do anything. Actually investigating the cause....

"This item might not exist or is no longer available"
is what I'm getting with first link?

would anyone be so kind to post some fresh links? downloads aren't working.

I got. The same prob. Then i use one drive app and it works
---------- Post added at 03:17 AM ---------- Previous post was at 03:15 AM ----------
aljoscha81 said:
I got. The same prob. Then i use one drive app and it works
Click to expand...
Click to collapse

pico gapps worked fine with method to edit setupwizard.apk - no magisk though , pretty sure can report magisk fails to https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589/page558
looking at the end of thread i think many experiencing no magisk issues
---------- Post added at 11:39 AM ---------- Previous post was at 11:00 AM ----------
kenzo_cz said:
Nubia UI v4.16 https://1drv.ms/u/s!AqD4NQPahcDKhkLOwY7JdwgW1csH
and the beta version Nubia UI v506 based android8.1 https://1drv.ms/u/s!AqD4NQPahcDKhkBLpdIj5OC3OKVT
--------first update to Nubia UI v4.16
--------update to Nubia UI v506
please delete fingerprint and re-add
Click to expand...
Click to collapse
Hi and thanks, any chance you managed to get magisk working ?
---------- Post added at 11:43 AM ---------- Previous post was at 11:39 AM ----------
Topogigi said:
I managed to install opengapps full by removing some apps with the aid of the gapps-config.txt file (otherwise system partition is too little - just check how to use it in the OpenGapps wiki). Then I disabled SetupWizard.apk renaming it SetupWizard.sav in /system/priv-apps via TWRP and adb (the nubia setup wizard does not start if the google setup wizard is active). Finally I rebooted and added my google account. So far, so good.
Click to expand...
Click to collapse
as there is currently no working magisk can I ask if this method to change apk to sav works for any app? At least I could debloat the ROM a little ....

for those that couldn't get the update file: this download wil work for 1 week only
https://we.tl/GRKgolmX2D

Went back to lineageos... Couldn't get gapps to work... After reformating data partition phone only booted to bootloader, couldn't get back in the os...

Topogigi said:
I did it the same way. Four zips in a row (including gapps modified accordingly my previous post). Then I rebooted. BTW, I use magisk
Uh oh, it seems I spoke too early....Magisk manager installs fine but it does not allow to do anything. Actually investigating the cause....
Click to expand...
Click to collapse
Everything now return to stock and I want to flash TWRP, but cannot connect with computer. The driver is not working. When I do fastboot device, it shows waiting for device. My operation system is win 10. Does anyone share a driver to me?
Thank you.

Got anybody information about is project treble in this rom?

aljoscha81 said:
Got anybody information about is project treble in this rom?
Click to expand...
Click to collapse
no... project treble checker says it's missing the A/B filesystem, so it's not ready for Treble

Could give us a little more details on how to do this: "Then I disabled SetupWizard.apk renaming it SetupWizard.sav in /system/priv-apps via TWRP and adb "?
Thanks
---------- Post added at 08:34 PM ---------- Previous post was at 08:01 PM ----------
If it is not asking too much, share also the modified gapps.

How To Guide ViperFX for OxygenOS12/ColorOS12

1. Install AML and ViperFX
2. Reboot.
3. Launch Viper and install the driver.
4. Without running Viper:
- From the archive AML.rar
replace post-fs-data.sh along the path /data/adb/modules/AML
- From the archive Viper.rar
replace post-fs-data.sh along the path /data/adb/modules/VIPER4AndroidFX
5. Reboot.
6. Done.
Note.
1) My PowerAmp does not work correctly.
2) If there is a clock offset in the status bar then install the module selinux_enforce.zip
Spoiler: Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[email protected] said:
1. Install AML and ViperFX
2. Reboot.
3. Launch Viper and install the driver.
4. Without running Viper:
- From the archive AML.rar
replace post-fs-data.sh along the path /data/adb/modules/AML
- From the archive Viper.rar
replace post-fs-data.sh along the path /data/adb/modules/VIPER4AndroidFX
5. Reboot.
6. Done.
Note.
1) My PowerAmp does not work correctly.
2) If there is a clock offset in the status bar then install the module selinux_enforce.zip
Spoiler: Screenshot
View attachment 5544989View attachment 5544991
Click to expand...
Click to collapse
Thanks. Can't extract your .rar files, seem corrupted

Bepi Mosto said:
corrupted
Click to expand...
Click to collapse
reload

Finally working in OOS12 thanks!
P.S for some reason the folder directories to copy the files were:
data/adb/modules/aml
and
data/adb/modules/ViPER4AndroidFX
Figured it out when getting directory does not exit when trying the paths given in first post

TY for this. I had it working 100% on Android 11, but figured I was lost on 12. Only issue I've had is it constantly thinks I'm connected to my car radio's BT after I disconnect, so profiles aren't perfect, but I missed V4Android. Sound quality is night vs day.

Hi there,
after several other methods this one helped me to solve the driver problem. Thanks for that!
Still I have the problem that NEON is not activated. Is there any solution to be found anywhere?
I am using the Oneplus Nord 2T with Oxygen OS Android 12.
EDIT: found solution.

This worked fine for me on OOS13, it works in all apps when the legacy mode is on. However after doing this whole procedure, Dolby Atmos no longer works (at least on the integrated speakers, which is what I only tested)

Didn't work. After replacing files Viper driver is installed loop (OnePlus 10 Pro, OOS 13, C20 (EU))

Arcide said:
This worked fine for me on OOS13, it works in all apps when the legacy mode is on. However after doing this whole procedure, Dolby Atmos no longer works (at least on the integrated speakers, which is what I only tested)
Click to expand...
Click to collapse
Did anyone else have this issue and any clue on how to solve it?

Hey guy i installed viper works but when i try to use the Convolver and than i click on impulse response. I get this message on the bottom. Anyway to fix this.

The presets install into a different folder. You have to manually move them over to where Viper is telling you it can't find them. Oddly enough, I had to use Terminal to move them. Even Root Explorer with SU permissions got a r/w denial.

MStrawder said:
The presets install into a different folder. You have to manually move them over to where Viper is telling you it can't find them. Oddly enough, I had to use Terminal to move them. Even Root Explorer with SU permissions got a r/w denial.
Click to expand...
Click to collapse
i Wnet into the folder and i have everytinh there took a screen shot of it.
Am i doing something wrong

I believe its a weird permissions error. There's a guide to getting these to work in the main Viper4Android thread here on XDA.

MStrawder said:
I believe its a weird permissions error. There's a guide to getting these to work in the main Viper4Android thread here on XDA.
Click to expand...
Click to collapse
Would you be able to link to that fix please.
Also i removed viper and verytime it asks me to install drivers and i do and when i reboot start viper it asks me to do it again. Sorry a little frustrated

Viper4Android That's the thread. Its towards the end. As far as troubleshooting, I can only recommend removing all of the modules and starting from scratch. The steps at the top of this thread worked perfectly for me.

MStrawder said:
Viper4Android That's the thread. Its towards the end. As far as troubleshooting, I can only recommend removing all of the modules and starting from scratch. The steps at the top of this thread worked perfectly for me.
Click to expand...
Click to collapse
Someone recommened to install the dolby app and it would work going to try it and let you know.

MStrawder said:
Viper4Android That's the thread. Its towards the end. As far as troubleshooting, I can only recommend removing all of the modules and starting from scratch. The steps at the top of this thread worked perfectly for me.
Click to expand...
Click to collapse
So far nothing i have done has fixed the impulse problem says its not there but the files are in there.

I don't have the link, but Google for Viper4Android 2.7 profiles. A guy has a GitHub page where he's updated them all to work with Viper 2.7. I remember having to download those as the old profiles didn't seem to be recognized.

MStrawder said:
I don't have the link, but Google for Viper4Android 2.7 profiles. A guy has a GitHub page where he's updated them all to work with Viper 2.7. I remember having to download those as the old profiles didn't seem to be recognized.
Click to expand...
Click to collapse
So afterman trys i was able to get the convolver and impulse response to work. One last question on my old one plus 7 pro i have viper installed with a rom on it and i have this layout wanted to know where i could find this version. Also Its the same version i am using but the layout is different.

I can't spot a difference in the two images. It won't enable though until you toggle the Master Power button to on.