customrom.NOVA.Xposed.R5
OK here's my Nova.Rom with the xposed framework and it's:
Deodexed
Debloated
No-Swap
zipalingned
Tethering is enabled
Boot Logo from @wickedesires - Busybox - Dolby Atmos - ES File Explorer - QuickBoot - SuperSU are installed
it's using the MM Icons from NOVA
I did not test any xposed apps but the framework is their and active
If you need the xposed uninstaller or updates their here >> http://forum.xda-developers.com/showthread.php?t=3034811 Thanks @rovo89
Download Here
6 Apps need updating on install ...sorry forgot about that
I'll update this to B151 as soon as I get it
Note: If you don't see the new boot Logo try this
open your Terminal Emulator. At the $ prompt change into superuser mode by typing su and pressing Return/Enter. You will then get the # prompt.Type load_oemlogo press Return/Enter and several lines of text will display, when this stops exit out of Terminal Emulator.
REBOOT and enjoy your new boot logo.
Click to expand...
Click to collapse
Reserved
Nice work
Which tool you used to deodex the ROM ?
I tried SVADeodexer & Super Kitchen and both of them results in bootloop
Sent from my HUAWEI KII-L21 using Tapatalk
AL_IRAQI said:
Nice work
Which tool you used to deodex the ROM ?
I tried SVADeodexer & Super Kitchen and both of them results in bootloop
Sent from my HUAWEI KII-L21 using Tapatalk
Click to expand...
Click to collapse
batchapktool it's in the repository under xposed
I hope this doesnt install boot logo automatically, i made my own
Kennii said:
I hope this doesnt install boot logo automatically, i made my own
Click to expand...
Click to collapse
yes the custom boot logo is installed, it's simple to change
I was on CM13 and would like to try this rom, but when I flash it kicks me back to TWRP while trying to boot. Never had anything like this happen before. Im able to reflash CM13 and load it up fine.
Im trying now to flash my original backup and see what happens.
dashubernator said:
I was on CM13 and would like to try this rom, but when I flash it kicks me back to TWRP while trying to boot. Never had anything like this happen before. Im able to reflash CM13 and load it up fine.
Im trying now to flash my original backup and see what happens.
Click to expand...
Click to collapse
you will most likely need to return to stock, then factory reset and wipe / advanced / wipe internal storage to return to lollipop from MM
clsA said:
you will most likely need to return to stock, then factory reset and wipe / advanced / wipe internal storage to return to lollipop from MM
Click to expand...
Click to collapse
Thanks for the reply, that seemed to take care of it.
i wiped before and flashed and now im stuck on the honor for the brave screen ?
---------- Post added at 11:26 AM ---------- Previous post was at 11:02 AM ----------
on twrp i get cant mount system resource busy!
richielasalsa said:
i wiped before and flashed and now im stuck on the honor for the brave screen ?
---------- Post added at 11:26 AM ---------- Previous post was at 11:02 AM ----------
on twrp i get cant mount system resource busy!
Click to expand...
Click to collapse
if you see an error in TWRP about the system not mounted you need to reboot recovery and flash it again
you normally only get this if you did an advanced wipe and checked system or if you mounted system before flashing
customrom.NOVA.Xposed.KIW-L24.B140.R5.zip this gets stuck on boot but this worked customrom.Nova.KIW-L24.B140.zip
CM13 to Nova
I just came from CM13 to Nova and had same issues. You cant install from a zip if your coming from Marshmello. I had to first download a Twrp Backup.I used the stock one in repo. I copied the stock TWRP backup folder to Twrp/backup/(s/n folder of your phone)/stockhonor5x. Then boot to recovery and Click restore. Select stock folder. Then you can Install Nova zip. right on top.
richielasalsa said:
customrom.NOVA.Xposed.KIW-L24.B140.R5.zip this gets stuck on boot but this worked customrom.Nova.KIW-L24.B140.zip
Click to expand...
Click to collapse
I just did a factory reset and loaded the B140.R5 rom again .. it takes about 65 seconds to get to the honor screen then it takes another 5 - 10 min on the EMUI Optimizing system screen and then loads the lock screen.
It has xposed installed is why the first boot is slow
I need help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my KIW-L24 using XDA-Developers mobile app
david00000 said:
I need help
Sent from my KIW-L24
Click to expand...
Click to collapse
I solved my play store errors by changing sd cards and formatting it with the phone. also set storage to sd card and not internel
in the short term removing your play account and redoing it will fix it temporally
others have reported that unmounting the sd card and remounting it fixed it for them
Can someone who has used this rom tell me if it's significantly quickly than stock? The only mods I haven't done that are in this are zip align and no swap. If the difference is negligible I'll just stick with what I've got, otherwise I'm gonna try it out. Also, @clsA I've added several new boot animations and a few color variants of the splash screen if you want to add any of them.
wickedesires said:
Can someone who has used this rom tell me if it's significantly quickly than stock? The only mods I haven't done that are in this are zip align and no swap. If the difference is negligible I'll just stick with what I've got, otherwise I'm gonna try it out. Also, @clsA I've added several new boot animations and a few color variants of the splash screen if you want to add any of them.
Click to expand...
Click to collapse
their is no voodoo here, but the no-swap is the real speed boost along with the nova launcher
To me the xposed framework is useless, the R4 release is still my favorite
Rene
plz help sir, after flashing the zip file it keep rebooting to twrp
Related
[SIZE=+2]This thread has been created
for
Questions & Answers/Troubleshooting[/SIZE][SIZE=+2]Specific to[/SIZE]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[ROM][GT-N7100][MARSHMALLOW][6.0.1][CyanogenMod 13.0] [UNOFFICIAL]
Please feel free to share issues, questions and offer help
Please keep discussion focused, on the topic described in the OP
2. Post Frequently asked questions
FAQ
Q1: Is this ROM rooted?
Yes, CyanogenMod is rooted by stock, but you must enable root in developer options.Q2: Does this ROM support Agni?
Yes: Agni thread. Don't report bugs, if you installed Agni.Q3: Is the new Gello browser included?
Yes, it's in the ROM.Q4: Do I need to do a clean flash, if I update the ROM?
No, only wipe cache and dalvik-cache.Q5: Is Doze enabled?
Yes, it is.Q6: Will there be a official version of this ROM?
No
Nice :good:
Why I cant disable CM sms messaging app? I'm using Google Messenger. I believe some weeks or months back I was able to disable it (and I still am able to disable Cm browser app, email and other system apps)
Hi,
you should be able to disable it via SDMaid. It can't be disabled via inbuilt manager because CyanogenMod only allowed to freeze some system apps. Messenger can't be freezes.
Thanks for using Q&A!
Hey, users reported there is no Gello in latest build, but how about videos in Chrome?
We know, or I do, that build 28/04 is does not support videos in Chrome. Uhm, not sure if I am supposed to be able to ask this but, @Trafalgar Square will you do any clean buid soon? It may fix the minor bugs we have now. Thanks.
Hi. Can anyone give a small step-by-step instruction set on how to switch to aggressive doze?
Thanks
hello,
I decided to install your ROM on my Note II.
Im coming from 4.4.2 official.
I just rooted and installed latest TWRP,backuped everything with Titanium.
Do I just wipe and install your ROM and GAPPS?
Do I need anything else,like change partition sizes and stuff?
Or do I just shoot?
Thanks in advance!
Promhtheas2000 said:
hello,
I decided to install your ROM on my Note II.
Im coming from 4.4.2 official.
I just rooted and installed latest TWRP,backuped everything with Titanium.
Do I just wipe and install your ROM and GAPPS?
Do I need anything else,like change partition sizes and stuff?
Or do I just shoot?
Thanks in advance!
Click to expand...
Click to collapse
This is exactly what you have to do:
- root your device, use CF-autoroot by Chainfire
- flash TWRP 3.0.2.0 (latest, find it on their website)
- wipe EVERYTHING
To do so go to settings and check rm-rf instead of formating; after that wipe data and type "yes". go to advanced wipe and wipe cache, dalvik, internal, system (everything you see there. USB-otg and micro sd are not required, but i always wipe sd because i have nothing important on it).
- reboot device in recovery and if you want to be 100% sure, wipe again everything with rm-rf ON (reboot again in recovery)
- now you can connect your device to PC and copy the rom zip and gapps zip to your device,(i copy them on sd, it doesn't really matter).
- disconnect your device and flash tge rom zip
- when that's done DONT wipe dalvik/cache
- flash gapps
(make sure you don't flash google camera, it's not working)
- now you CAN wipe dalvik and cache
- reboot into system
Enjoy the best CM 13 ROM.
Now, if you want to tweak your device a little bit more you can install from play store Greenify (in greenify go to settings and enable Aggressive Doze) and L Speed. There is a thread on xda with L Speed. The maintainer explains there what L Speed does and how it works.
I use them and it works better.
@Trafalgar Square did you notice a slower charge with BeansKernel? I get like 1100 mAh..
---------- Post added at 05:24 PM ---------- Previous post was at 05:15 PM ----------
gciochina said:
Hi. Can anyone give a small step-by-step instruction set on how to switch to aggressive doze?
Thanks
Click to expand...
Click to collapse
Install Greenify and go to it's Settings. You will see there Aggressive Doze unenabled, so you have to enable it.
In 9 hours my battery went from 45% to 44%. :good:
Hi Andrew,
Thanks for the reply..I just did a factory reset and installed the ROM and full GAPPS..everything seem to work so far,including Camera.I will test Greenify and L Speed too.
Promhtheas2000 said:
Hi Andrew,
Thanks for the reply..I just did a factory reset and installed the ROM and full GAPPS..everything seem to work so far,including Camera.I will test Greenify and L Speed too.
Click to expand...
Click to collapse
Google Camera? Weird, it doesn't work here
Promhtheas2000 said:
Hi Andrew,
Thanks for the reply..I just did a factory reset and installed the ROM and full GAPPS..everything seem to work so far,including Camera.I will test Greenify and L Speed too.
Click to expand...
Click to collapse
adoptable storage is working?
sd card as internal memory?
huyhung040106 said:
adoptable storage is working?
sd card as internal memory?
Click to expand...
Click to collapse
Not for me. But that might be because of my SD.
Reptilez_DK said:
Not for me. But that might be because of my SD.
Click to expand...
Click to collapse
That just doesn't work, it's not only you.
huyhung040106 said:
adoptable storage is working?
sd card as internal memory?
Click to expand...
Click to collapse
No, it will never work.
Hey, I have a problem with WhatsApp, when I restore the backup, it failed
roy_29_11 said:
Hey, I have a problem with WhatsApp, when I restore the backup, it failed
Click to expand...
Click to collapse
Please give proper permissions for WhatsApp.
Thanks for using Q&A!
With file manager?
No, in settings.
Under Apps.
Hey i have a problem after flashing cm13 i stuck in bootloop i need help
Hi All,
As with my previous devices I've always looked out for the useless but still cool, screen off animation (remember the CRT animation on the old phones? ) as it has not yet been created for our device our only other option is to use Xposed.
Thanks to @zst123 for creating the Xposed module.
Cheers :good:
I've tested this to work with LeeDroid, however it should work on any other ROM running android 6.0.XXX
Requirements
Root Access
A device running Android 6.0.XXX Marshmallow
A custom recovery (TWRP)
1. Go here and download this http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
This is the alpha apk
2. Go here and download this http://dl-xda.xposed.info/framework/sdk23/arm64/xposed-v81-sdk23-arm64.zip
This is the framework
3. Go here and download this http://dl-xda.xposed.info/framework/uninstaller/xposed-uninstaller-20150831-arm64.zip
This is the Xposed uninstaller just in case you want to remove it.
You now have everything you'll need for now
4. Install the Alpha APK and reboot to recovery.
5. Once in recovery, flash the Xposed Framework, once installed, reboot system, this may take a while, a few minutes is not uncommon.
Once back in the android system, you'll find that it indexes all your apps, this is normal, allow it to finish.
6. Open the Xposed Alpha app and click download.
7. Search for and download the ScreenOffAnimation module and enable it under modules within the Xposed app.
8. Reboot your device.
9. Open the ScreenOffAnimation app and enable an animation. Reboot, again this may take a few minutes although it should be quicker than the framework reboot, no application indexing should take place.
10. Done and Enjoy
You will need to reboot to fully implement any new changes to this app, it also hasn't been updated for a while so the current version is v1.3, however it is functional and should work as expected.
You might be able to squeeze this whole process with maybe a few less reboots, however this is how I first did it and how it worked for me so it should (if you follow to the letter) work for you
At the time of writing the versions used are as follows.
Alpha APK v3.0alpha4
Framework v80sdk23 for ARM64 devices.
ScreenOffAnimation v 1.3
Any questions, please ask and I'll do what I can to assist.
why do you link to an old xposed framework v84 is available since May 4 or 5
JEANRIVERA said:
why do you link to an old xposed framework v84 is available since May 4 or 5
Click to expand...
Click to collapse
Didn't know mate [emoji6] I know it works. Haven't tried the newer one yet. Is there actually a difference?
I know the affects on your phone is minimal with this version, will get around to trying it, also I've copied this from my old thread on the 6P so will get around to updating it when I can.
I'm getting an "Unfortunately, Xposed Installer has stopped" error :/
I renamed the XposedInstaller_3.0_alpha4.zip to XposedInstaller_3.0_alpha4.apk, and installed it the normal way.
I'm using Xposed framework v84 (intalled by using TWRP)
htc-hd2 said:
I'm getting an "Unfortunately, Xposed Installer has stopped" error :/
I renamed the XposedInstaller_3.0_alpha4.zip to XposedInstaller_3.0_alpha4.apk, and installed it the normal way.
I'm using Xposed framework v84 (intalled by using TWRP)
Click to expand...
Click to collapse
Hi HTC, I personally haven't installed v84 as of yet so I can't comment on its functionality. Once I have I'll comment here however why are you renaming the file? It shouldn't make a difference. AFAIK anyway.
Yea this doesn't work. At least with 84. I try to click on preview animation but does nothing.
Ndaoud360 said:
Yea this doesn't work. At least with 84. I try to click on preview animation but does nothing.
Click to expand...
Click to collapse
And have you rebooted?
dladz said:
And have you rebooted?
Click to expand...
Click to collapse
Yes
Edit: rebooted a second time and it worked
Ndaoud360 said:
Yes
Edit: rebooted a second time and it worked
Click to expand...
Click to collapse
Yea you need to reboot after alterations. After the first it should take without.. I just installed it with the version I said to download and it still functions, can you clarify that it works with 84?
I'll continue with version 80 for the time being and see if the battery is affected any more than it was on my Nexus 6P which was extremely minimal.
I've also noticed that android pay opens as expected.
I'm currently using LD with systemless root.
Update, with v 80, no excessive drain at all, I'm on exactly what I was on prior to installing it, will test overnight. I'm guessing 2% overnight.
htc-hd2 said:
I'm getting an "Unfortunately, Xposed Installer has stopped" error :/
I renamed the XposedInstaller_3.0_alpha4.zip to XposedInstaller_3.0_alpha4.apk, and installed it the normal way.
I'm using Xposed framework v84 (intalled by using TWRP)
Click to expand...
Click to collapse
Haha htc I only just realised, youve renamed a zip to an apk? That's not going to install mate, Im guessing youve got a zip which will be the framework, that needs to be installed in recovery, then install the alpha build via the phone using a file manager.
Or just follow my guide.
All 3 files are (when I download them) .zip files.
The "the alpha apk" (XposedInstaller_3.0_alpha4.zip) will not (as you suggest in point 4) install as .zip file!
The Xposed Framework has been installed/flashed (as suggested in point 5) by using recovery.
htc-hd2 said:
All 3 files are (when I download them) .zip files.
The "the alpha apk" (XposedInstaller_3.0_alpha4.zip) will not (as you suggest in point 4) install as .zip file!
The Xposed Framework has been installed/flashed (as suggested in point 5) by using recovery.
Click to expand...
Click to collapse
Wrong. The first file you download is the APK. Not a zip.
1. Go here and download this http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
This is the alpha apk
Why did you think this was a zip file?
I just downloaded it from the OP and it's an apk, so not sure what you're talking about mate.
When I download the file its offered as .zip (maybe a Windows 10 / IE11 problem?)
---------- Post added at 04:23 PM ---------- Previous post was at 04:15 PM ----------
Proof
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
htc-hd2 said:
When I download the file its offered as .zip (maybe a Windows 10 / IE11 problem?)
---------- Post added at 04:23 PM ---------- Previous post was at 04:15 PM ----------
Proof
Click to expand...
Click to collapse
Download it from your phone mate..
To be honest, always download from the source of the device if it can be installed from that device. In this case a PC is not needed.. I imagine that if I downloaded this from my PC it would also be an apk.. Not sure why you're getting a zip.
If you open the zip on your pc what's inside it?
I have several phones here. So downloading to pc is easier for me to install it to the other phones.
Inside the zip file I see the apk layout. Ie. Assets, META- INF, res, androidManifest.xml. Basicly an .apk file.
That's why I renamed the zip to .apk
Problem for me is not installing the file. Problem is that it crashes when running it.
Anyway... I'm going to install a custom rom later this week, so problem will be solved.
htc-hd2 said:
I have several phones here. So downloading to pc is easier for me to install it to the other phones.
Inside the zip file I see the apk layout. Ie. Assets, META- INF, res, androidManifest.xml. Basicly an .apk file.
That's why I renamed the zip to .apk
Problem for me is not installing the file. Problem is that it crashes when running it.
Anyway... I'm going to install a custom rom later this week, so problem will be solved.
Click to expand...
Click to collapse
That is not the APK mate. You've downloaded the wrong file..
Sorry I'm not sure how many different ways i can say it. The original file I posted is an apk.
And I do not know how many different ways I can say this, but they all download as a zip file for me in IE.
That's it. I'm out of here..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
-Based on J710FXXU3BQI8
-Security patch 2017-8-01
-Fully Deodexed
-Highly debloated, 560MB Only!!!
-Knox stuff removed
-Disabled Encryption & DM Verify for system
-Disabled Knox related stuff in build.prop
-Not Rooted, flash your desired root
ChangeLogs:
V2.0
-Added couple of apps back
-Fixed some bugs "hopefully"
-Added back some data/volte apks
-Updated ROM base to XXU3BQI8
V1.0
-Initial Release
Installation instructions:
-Download the ROM
-Wipe Data ,Cache Partitions
-Flash the ROM
-Flash ROOT ZIP, SuperSu or Magisk
Download:
V2.0
Drive
V1.0
Drive
Mega
Screenshots:
Note for Indian users: i dont know if volte will work or not, but files are already in the ROM
Another Note for users with other models, J710M/FN or any other model with the same chip, please buckup everything before trying to flash the ROM, i tried it on SM-J710FQ everything works fine so far
Enjoy :victory:.....
XDA:DevDB Information
Prism Barebone, ROM for the Samsung Galaxy J7
Contributors
AL_IRAQI
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: XXU3BQI8
Based On: Stock TW
Version Information
Status: No Longer Updated
Current Stable Version: V1.0
Stable Release Date: 2017-11-10
Created 2017-09-10
Last Updated 2017-12-22
Removed Apps
Removed Apps ZIP's:
Drive
Mega
Download other Samsung apps from their store or from the playstore here or apkmirror or sammobile
Reserved
Stock Images
Download Folder
Drive
Mega
Flash it with Odin
Note: its for SM-J710F model only, double & triple check your model before flashing, im not responsible for possible brick that happens when you flash it on the wrong model
Notes & Fixes:
Notes:
- Do not ask for AROMA
- Do not qoute OP
Fixes:
-GPS fix in attachments
Nice rom it only need some mods now
---------- Post added at 02:52 AM ---------- Previous post was at 02:47 AM ----------[/S
maurce249 said:
Nice rom it only need some mods now
---------- Post added at 02:52 AM ---------- Previous post was at 02:47 AM ----------[/S
Click to expand...
Click to collapse
Mods like what ?
Always wanted a ROM this debloated!!!! Awesome
awesome
great work again thanks ?
Bro is there any way to enable call recording option since xposed is not working. thanks for effort
parthopagol said:
Bro is there any way to enable call recording option since xposed is not working. thanks for effort
Click to expand...
Click to collapse
Try out CSC Expert
AL_IRAQI said:
Mods like what ? [/QU
WELL FOR NOW ONCE I HAVE SCREEN SHOT IN QUICK SETTINGS I AM GOOD
Click to expand...
Click to collapse
Great guidelines sir..excellent
Bro settings hanged when go to sim card manager. thanks otherwise all is ok. checked
maurce249 said:
AL_IRAQI said:
Mods like what ?
Click to expand...
Click to collapse
WELL FOR NOW ONCE I HAVE SCREEN SHOT IN QUICK SETTINGS I AM GOOD
Click to expand...
Click to collapse
Ill take a look, but chill with dem caps
parthopagol said:
Bro settings hanged when go to sim card manager. thanks otherwise all is ok. checked
Click to expand...
Click to collapse
Hmm, flash SimToolKit from removed zips
AL_IRAQI said:
Ill take a look, but chill with dem caps
Hmm, flash SimToolKit from removed zips
Click to expand...
Click to collapse
ok
Bro After root with magisk 14 i cannot uninstall any system apps even using root explorer. please suggest me.
parthopagol said:
Bro After root with magisk 14 i cannot uninstall any system apps even using root explorer. please suggest me.
Click to expand...
Click to collapse
I flashed stock nougat rom and TWRP successfully. After that I flashed Magisk but my phone reboot unsuccessfully. It booted and this message appeared:
" unable to restart your device. the integrity verification has failed"
It requires to factory reset and reboot. If i do so, everything'd come back to start point.
Please tell me if I did wrong somewhere.
chinhlevn said:
I flashed stock nougat rom and TWRP successfully. After that I flashed Magisk but my phone reboot unsuccessfully. It booted and this message appeared:
" unable to restart your device. the integrity verification has failed"
It requires to factory reset and reboot. If i do so, everything'd come back to start point.
Please tell me if I did wrong somewhere.
Click to expand...
Click to collapse
I dont know but try flashing SamsungAntiRootRemoval
https://build.nethunter.com/samsung-tools/samsung-antiroot-removal/
parthopagol said:
Bro After root with magisk 14 i cannot uninstall any system apps even using root explorer. please suggest me.
Click to expand...
Click to collapse
Hey, System is mounted as read only by default, that is why you can remove or move stuff in there sometimes, try removing stuff from twrp
chinhlevn said:
I flashed stock nougat rom and TWRP successfully. After that I flashed Magisk but my phone reboot unsuccessfully. It booted and this message appeared:
" unable to restart your device. the integrity verification has failed"
It requires to factory reset and reboot. If i do so, everything'd come back to start point.
Please tell me if I did wrong somewhere.
Click to expand...
Click to collapse
You have to disable boot verification & device encryption after flashing root, use this zip
you have to wipe your storage from twrp also after flashing this zip
trouble sending text messages
Message application doesn't work correctly
Can't send text messages. Sorry for my bad english >.<
youtube watch?v=7JWgOaR3c9c
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm not responsible for whatever damage this could possibly cause to your device.
Updated with latest Havoc release : 28/01/20
First you will need to have TWRP :
Please follow this guide : https://forum.xda-developers.com/galaxy-a50/development/recovery-twrp-galaxy-a50-t3916199
Rom GSI download link : https://sourceforge.net/projects/ex...-OS-v3.1-20200111-ARM64AB-GSI.img.xz/download
Please download this file and don’t download last havoc 3.1 release because it should no work.
Thanks to ExpressLukeGSI, phh, havoc for this project.
1. Format Data + Wipe all
2. Power Off + Go back to Recovery TWRP
3. Flash System img
4. Power Off + Go back to Recovery TWRP
5. Resize the system partition, in TWRP go to
Wipe Advanced Wipe Select System Repair or change file system Resize file system
6. Flash these gapps : https://easyupload.io/llnivj
7. Then mount vendor + system and flash this fix in TWRP : https://easyupload.io/8se2a7 (It will fix overlay and dualsim)
Issue knowed :
Fingerprint doesn't work
MPT not working
ROM OS Version: 10 Q
Security patch : January 2020
ROM Firmware Required: TWRP Recovery
Version Information
Status: Stable GSI
Last Updated 2020-01-28
Eek, it's finally happening, Testing this asap... just cause I can why the hell not
---------- Post added at 06:58 AM ---------- Previous post was at 06:29 AM ----------
Installed and up and running. Tested on FN variant
Voniaak said:
I'm not responsible for whatever damage this could possibly cause to your device.
First you will need to have TWRP :
Please follow this guide : https://forum.xda-developers.com/galaxy-a50/how-to/[email protected] meliohe
Rom GSI download link : https://bit.ly/2m9Wk3y
Official Thread : https://forum.xda-developers.com/pr...bled-device-development/gsi-havoc-os-t3930030
Thanks to Vincent, phh, havoc for this project.
Guide :
1. Wipe all
2. Flash System img + Flash DM
3. Power Off
4. Go back to Recovery TWRP
5. Resize system
6. Flash these gapps : https://filebin.net/9hgskxxbr7hdi27r/open_gapps-arm64-9.0-pico-20190126.zip?t=2z9sttui or https://drive.google.com/file/d/1nS2z4emxHovZ0x3CqXl59r8oBqx9DiPU/view
7. Delete bootanimation from TWRP in System/System/Media/Bootanimation.zip
8. Power Off wait 2 reboot and its done
Issue knowed :
Fingerprint doesn't work
Magisk does'nt work
Instead of these issue it's okay !
Many thanks to @muhamet for give me video and guide
Click to expand...
Click to collapse
Nice job my frend
Fyi, another issue for the list:
Dual Sim is not working
Add issues : Changing default USB configuration reboots phone
Brightness bar is buggy AF
sound is lesser than stock
However , nice to see projects for our device .
Thumbs up !
O thank you, sound is ok for me!
And battery life better on havoc than one ui
Voniaak said:
O thank you, sound is ok for me!
And battery life better on havoc than one ui
Click to expand...
Click to collapse
Yes it is better
Also, Magisk is working for me
I flashed the zip with TWRP and when powering the phone on I was holding down the volume up and power and let go of both immediately when the screen turns on.
So does the hotspot function work? No issues with WiFi or 4g? No Bluetooth issues? Hope to hear from you.
Agil1ty said:
So does the hotspot function work? No issues with WiFi or 4g? No Bluetooth issues? Hope to hear from you.
Click to expand...
Click to collapse
No issues
So for me, flashing TWRP gave me the TWRP background but no menu. Any idea what I’m doing wrong?
Agil1ty said:
So for me, flashing TWRP gave me the TWRP background but no menu. Any idea what I’m doing wrong?
Click to expand...
Click to collapse
Ah, this means the device is encrypted. Before installing TWRP make sure to wipe data/cache and after its installed through Odin make sure you immediately go into TWRP, don't let it boot first. When your in TWRP make sure to flash the decrypter before booting up.
Look at the TWRP recovery steps again just double check.
---------- Post added at 01:39 AM ---------- Previous post was at 01:36 AM ----------
Also, I thought tripping Knox was permanent, after checking Knox being tripped in this OS, as expected it was tripped, however after reinstalling stock firmware (rooted version) Knox is now nolonger tripped.
Ain't able to flash
Hello everyone. One quick question.
When I try to install the ROM image in TWRP, the device will restart on it's on. Any ideas of what the problem could be?
I tried to reistall samsungs firmware, reistall TWRP recovery and retry to intall the ROM but no luck.
Thnaks in advance for the replies...
Cheers,
F
AjayL13601 said:
Ah, this means the device is encrypted. Before installing TWRP make sure to wipe data/cache and after its installed through Odin make sure you immediately go into TWRP, don't let it boot first. When your in TWRP make sure to flash the decrypter before booting up.
Look at the TWRP recovery steps again just double check.
---------- Post added at 01:39 AM ---------- Previous post was at 01:36 AM ----------
Also, I thought tripping Knox was permanent, after checking Knox being tripped in this OS, as expected it was tripped, however after reinstalling stock firmware (rooted version) Knox is now nolonger tripped.
Click to expand...
Click to collapse
Thank you, this really helped. FInally got it to install. However, sometimes after using some apps the phone becomes really slow and sluggish (most noticable after using video apps, like youtube). Does anyone else also see this behaviour? I had to reboot the phone to get back to normal.
So far i really like the rom, everything I use works (bluetooth, hotspot, wifi, 4g, camera).
Has this ROM been modified specifically to work with our device or is it stock project treble?
AjayL13601 said:
Has this ROM been modified specifically to work with our device or is it stock project treble?[/QUOTE
Project treble
Click to expand...
Click to collapse
Huhhh, interesting, in that case I'm gonna try some other project treble roms
AjayL13601 said:
Huhhh, interesting, in that case I'm gonna try some other project treble roms
Click to expand...
Click to collapse
Not all treble ROMs working. Try PE working
Guide updated :
Updated Havoc GSI : Q icons !
Magisk and Faceunlock now works!
Voniaak said:
Guide updated :
Updated Havoc GSI : Q icons !
Magisk and Faceunlock now works!
Click to expand...
Click to collapse
How to update?
This is a root method for the s7 and s7 edge on bootloader 11 (B) phones using the combination firmware. I really dont think it will do much but I will post it and maybe someone will do something with itDownloads
COMBINATION_VZW_FA60_G930PUCUBATA1_REV-11-B_01-13-23.tar.7zOdin3_v3.14.1_3B_PatcheD.7z
S7 Edge Files Found Here
Instructions
This will repartition phone to be like S7 flat Verizon models and Verizon S7 edge models to make things more uniform. This will not affect the phone.
1. Download and unzip COMBINATION_VZW_FA60_G930PUCUBATA1_REV-11-B_*-*-*.tar.7z.
Inside is a HEROQLTE_USA_VZW.pit. Load this pit file in the Pit Tab in Odin and the COMBINATION_VZW_FA60_G930PUCUBATA1_REV-11-B_*-*-*.tar.mds in the BL slot in Odin. Under the options tab in Odin select nana erase and make sure repartition is check and then flash
2. Phone will reboot twice when done and on second reboot you wipe data and then reboot. Once phone is booted you will have a limited combo rom you just need to copy rom from post 2 too phone and reboot too safestrap. You can do this by using the reboot app and click reboot recovery or by manually rebooting too recovery from powered off phone hold power up + volume up + home button till phone boots and you see recovery rebooting. The other apps are not needed unless for some reason safestrap doesn't work then Flashfire is included to do the flashing
3. Proceed to Post 2
Credits
klabit87 - Basically Everything
GSMCHEN - The root method
elliwigy -The root method
afaneh92 -Safestrap and too much too mention
You Can Try Flashing These Stock Rooted Marshmallow Roms In SafestrapDownloadsFlashable System Images
This need to by unzipped and images copied to phone
Everything in .7z is stuff that needs unzipped
system_g930_vzw_10-30-22.7z
system_g930_tmb_10-30-22.7zFlashable Zips
ECHOE_G935_Universal_AROMA_Rev11_B.zip --Samsung based Custom Rom Aroma Install
Directions
1. You must be on one of the above flashable system images first
2. Flash in safestrap or flashfire
3. Flash SuperSU_System.zip
4. Wipe Data
5. Will Take 10-15 minutes too boot first time
6. AOD may cause screen issues if so turn off AOD
Features
Multi Carrier
Echoe Rom for snapdragon USA
G935/G930 s7e/s7...
Aroma Edition...
Aroma installer options..
Choice of edge or flat..
Choice of carrier (Att,tmo,spr,vzw)
Choice of boot animation..
Mod Options...
Ux N7 apps..
N7 camera..
3 pages of app debloat options..
And more...
SuperSU 2.78
Deodexed
De-knoxed
De-bloated (mildly)
Rooted
Viper4/atmos
AdAway
Doze
Cpuspy
Fastergps
Root tool
Flasfire
Echoe control app
3Minit Battery
3Minit Clock
Custom Echoe boot animation
G930V_AOSP.zip -- A Touch Of AOSP Flavor-- No Samsung Apps All Google Apps
G930T_AOSP.zip -- A Touch Of AOSP Flavor-- No Samsung Apps All Google AppsFlash in safestrap after setup set default dialer to google and let all the apps update before using phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Odin Flashable Stuff
CP_G930_ROTATION_CAMERA_FIX.tar.md5 -- Flash In Odin Now Included In Above
Root Zips
This root zip is for system root only
SuperSU_System.zipSuperSU.apk -- If you need SuperSU.apk for some reason only use this one
Wipe data in safestrap
unzip install system image in safestrap.
flash SuperSU_System.zip in safestrap for root
Reboot and let phone boot too system
Directions
1. choose above rom and uzip to get the system image and copy the system image to phone the SuperSU_System.zip is not need these roms are prerooted. Reboot too safestrap.
2. In safestrap choose install and at bottom of screen choose image and locate the system.img and flash too system.
3. Then from home screen choose wipe then advanced wipe and choose too wipe data when done reboot
Use Safestrap As TWRP Recovery
This is included in above roms this is just incase you mess it up and need to reflash it
Safestrap-4.13-T01-S7_FLAT_EDGE_REV_11-B.zip -- Flash zip in safestrap
Your browser is not able to display this video.
Note
If someone wants to try and improve this stuff be my guest, Use or take what you need from here or start fresh you dont have to ask permission. Just credit the people I give permission too in post 1
I should probably know this, but, where do I get modded odin, with step-by-step instructions
Thank you
I have G930TUVSBCTA2
Can I root with this
johnwaldon1 said:
I have G930TUVSBCTA2
Can I root with this
Click to expand...
Click to collapse
yes but the rom I posted in post 2 may not work very good. There are not much choices for now
johnwaldon1 said:
I should probably know this, but, where do I get modded odin, with step-by-step instructions
Thank you
Click to expand...
Click to collapse
modded odin is in post 1
S7 edge combination
FirmwareX.Net_COMBINATION_ATT_FA60_G935VUCUBATA1.rar | by FirmwareX.Net for Generic Device/Other
https://firmwarex.net/samssung-s7-edge-sm-g935v-combination-file/
androidfilehost.com
S7 combination
FirmwareX.Net_COMBINATION_VZW_FA60_G930VUCUBATA1.rar | by FirmwareX.Net for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Ok, this is amazing, really incredible, but what does this mean overall? Can I flash GSIs using safestrap? This is what I've always wanted since I got a hand-me-down verizon S7!!
Trying some experiment with this root, so far good. playing with TWRP, Gapps. it worked on S7 930v, coming from g930vvrsbctc1 version!
jrkruse said:
You can try flashing this custom rom in safestrapDownloadssystem_custom.7zall_sec_csc.zipsprint_sec_csc.zipunzip install image in safestrap. If hangs on boot animation force reboot
flash proper csc zip in safetrap
Click to expand...
Click to collapse
System_custom.7z cant unzip with windows, 7z, or safestrap.. maybe im missing a step, some help would be appreciated
B105H4CK3R said:
System_custom.7z cant unzip with windows, 7z, or safestrap.. maybe im missing a step, some help would be appreciated
Click to expand...
Click to collapse
because androidfilehost is a POS. I'll reupload the stuff
B105H4CK3R said:
System_custom.7z cant unzip with windows, 7z, or safestrap.. maybe im missing a step, some help would be appreciated
Click to expand...
Click to collapse
try redownloading it now
Links fixed in OP and post 2
No Mirrors For System_Custom.7z!
I Can't Download System_Custom.7z Because There Are No Mirrors!
jrkruse said:
Links fixed in OP and post 2
Click to expand...
Click to collapse
Your custom ROM in post 2 does not show any mirrors
Visualwit said:
I Can't Download System_Custom.7z Because There Are No Mirrors!
Click to expand...
Click to collapse
Can You Help Us?
jrkruse said:
You can try flashing this custom rom in safestrapDownloadssystem_custom.7zall_sec_csc.zipsprint_sec_csc.zipunzip install image in safestrap. If hangs on boot animation force reboot
flash proper csc zip in safetrap
Click to expand...
Click to collapse
The system_custom.7z appears to be down (no mirrors). Could you re-upload? I'd like to mess with it on my SM-G930V.
Regardless, thank you for sharing this root!
I have copy of System_Custom, Will provide Mega download link
1.4 GB file on MEGA
mega.nz
MANY THANKS!