This is a root method for the s7 and s7 edge on bootloader 11 (B) phones using the combination firmware. I really dont think it will do much but I will post it and maybe someone will do something with itDownloads
COMBINATION_VZW_FA60_G930PUCUBATA1_REV-11-B_01-13-23.tar.7zOdin3_v3.14.1_3B_PatcheD.7z
S7 Edge Files Found Here
Instructions
This will repartition phone to be like S7 flat Verizon models and Verizon S7 edge models to make things more uniform. This will not affect the phone.
1. Download and unzip COMBINATION_VZW_FA60_G930PUCUBATA1_REV-11-B_*-*-*.tar.7z.
Inside is a HEROQLTE_USA_VZW.pit. Load this pit file in the Pit Tab in Odin and the COMBINATION_VZW_FA60_G930PUCUBATA1_REV-11-B_*-*-*.tar.mds in the BL slot in Odin. Under the options tab in Odin select nana erase and make sure repartition is check and then flash
2. Phone will reboot twice when done and on second reboot you wipe data and then reboot. Once phone is booted you will have a limited combo rom you just need to copy rom from post 2 too phone and reboot too safestrap. You can do this by using the reboot app and click reboot recovery or by manually rebooting too recovery from powered off phone hold power up + volume up + home button till phone boots and you see recovery rebooting. The other apps are not needed unless for some reason safestrap doesn't work then Flashfire is included to do the flashing
3. Proceed to Post 2
Credits
klabit87 - Basically Everything
GSMCHEN - The root method
elliwigy -The root method
afaneh92 -Safestrap and too much too mention
You Can Try Flashing These Stock Rooted Marshmallow Roms In SafestrapDownloadsFlashable System Images
This need to by unzipped and images copied to phone
Everything in .7z is stuff that needs unzipped
system_g930_vzw_10-30-22.7z
system_g930_tmb_10-30-22.7zFlashable Zips
ECHOE_G935_Universal_AROMA_Rev11_B.zip --Samsung based Custom Rom Aroma Install
Directions
1. You must be on one of the above flashable system images first
2. Flash in safestrap or flashfire
3. Flash SuperSU_System.zip
4. Wipe Data
5. Will Take 10-15 minutes too boot first time
6. AOD may cause screen issues if so turn off AOD
Features
Multi Carrier
Echoe Rom for snapdragon USA
G935/G930 s7e/s7...
Aroma Edition...
Aroma installer options..
Choice of edge or flat..
Choice of carrier (Att,tmo,spr,vzw)
Choice of boot animation..
Mod Options...
Ux N7 apps..
N7 camera..
3 pages of app debloat options..
And more...
SuperSU 2.78
Deodexed
De-knoxed
De-bloated (mildly)
Rooted
Viper4/atmos
AdAway
Doze
Cpuspy
Fastergps
Root tool
Flasfire
Echoe control app
3Minit Battery
3Minit Clock
Custom Echoe boot animation
G930V_AOSP.zip -- A Touch Of AOSP Flavor-- No Samsung Apps All Google Apps
G930T_AOSP.zip -- A Touch Of AOSP Flavor-- No Samsung Apps All Google AppsFlash in safestrap after setup set default dialer to google and let all the apps update before using phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Odin Flashable Stuff
CP_G930_ROTATION_CAMERA_FIX.tar.md5 -- Flash In Odin Now Included In Above
Root Zips
This root zip is for system root only
SuperSU_System.zipSuperSU.apk -- If you need SuperSU.apk for some reason only use this one
Wipe data in safestrap
unzip install system image in safestrap.
flash SuperSU_System.zip in safestrap for root
Reboot and let phone boot too system
Directions
1. choose above rom and uzip to get the system image and copy the system image to phone the SuperSU_System.zip is not need these roms are prerooted. Reboot too safestrap.
2. In safestrap choose install and at bottom of screen choose image and locate the system.img and flash too system.
3. Then from home screen choose wipe then advanced wipe and choose too wipe data when done reboot
Use Safestrap As TWRP Recovery
This is included in above roms this is just incase you mess it up and need to reflash it
Safestrap-4.13-T01-S7_FLAT_EDGE_REV_11-B.zip -- Flash zip in safestrap
Your browser is not able to display this video.
Note
If someone wants to try and improve this stuff be my guest, Use or take what you need from here or start fresh you dont have to ask permission. Just credit the people I give permission too in post 1
I should probably know this, but, where do I get modded odin, with step-by-step instructions
Thank you
I have G930TUVSBCTA2
Can I root with this
johnwaldon1 said:
I have G930TUVSBCTA2
Can I root with this
Click to expand...
Click to collapse
yes but the rom I posted in post 2 may not work very good. There are not much choices for now
johnwaldon1 said:
I should probably know this, but, where do I get modded odin, with step-by-step instructions
Thank you
Click to expand...
Click to collapse
modded odin is in post 1
S7 edge combination
FirmwareX.Net_COMBINATION_ATT_FA60_G935VUCUBATA1.rar | by FirmwareX.Net for Generic Device/Other
https://firmwarex.net/samssung-s7-edge-sm-g935v-combination-file/
androidfilehost.com
S7 combination
FirmwareX.Net_COMBINATION_VZW_FA60_G930VUCUBATA1.rar | by FirmwareX.Net for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Ok, this is amazing, really incredible, but what does this mean overall? Can I flash GSIs using safestrap? This is what I've always wanted since I got a hand-me-down verizon S7!!
Trying some experiment with this root, so far good. playing with TWRP, Gapps. it worked on S7 930v, coming from g930vvrsbctc1 version!
jrkruse said:
You can try flashing this custom rom in safestrapDownloadssystem_custom.7zall_sec_csc.zipsprint_sec_csc.zipunzip install image in safestrap. If hangs on boot animation force reboot
flash proper csc zip in safetrap
Click to expand...
Click to collapse
System_custom.7z cant unzip with windows, 7z, or safestrap.. maybe im missing a step, some help would be appreciated
B105H4CK3R said:
System_custom.7z cant unzip with windows, 7z, or safestrap.. maybe im missing a step, some help would be appreciated
Click to expand...
Click to collapse
because androidfilehost is a POS. I'll reupload the stuff
B105H4CK3R said:
System_custom.7z cant unzip with windows, 7z, or safestrap.. maybe im missing a step, some help would be appreciated
Click to expand...
Click to collapse
try redownloading it now
Links fixed in OP and post 2
No Mirrors For System_Custom.7z!
I Can't Download System_Custom.7z Because There Are No Mirrors!
jrkruse said:
Links fixed in OP and post 2
Click to expand...
Click to collapse
Your custom ROM in post 2 does not show any mirrors
Visualwit said:
I Can't Download System_Custom.7z Because There Are No Mirrors!
Click to expand...
Click to collapse
Can You Help Us?
jrkruse said:
You can try flashing this custom rom in safestrapDownloadssystem_custom.7zall_sec_csc.zipsprint_sec_csc.zipunzip install image in safestrap. If hangs on boot animation force reboot
flash proper csc zip in safetrap
Click to expand...
Click to collapse
The system_custom.7z appears to be down (no mirrors). Could you re-upload? I'd like to mess with it on my SM-G930V.
Regardless, thank you for sharing this root!
I have copy of System_Custom, Will provide Mega download link
1.4 GB file on MEGA
mega.nz
MANY THANKS!
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction:
This is my first ROM for any device, there will probably be bugs. I am not responsible for anything that happens to YOUR device as a result of flashing this. All releases are tested before posting to minimize the risk but there is always a chance something could go wrong!
My aim with this rom was to clean out all the useless rubbish I never use. This includes all social networking integration as I only see this as bloat, being as most of it is installable from the market.
Maybe someone else would like this too, so I am sharing my work.
Downloads:
z1slim.flashable.v0.4.zip (XDA Direct)
z1slim.flashable.v0.4.zip (XDA Torrent)
MD5: f12ac5a793edd2a25f7d9c3e758fda38
290-stripped.ftf
MD5: d06d6a554ba012d3ca0fb6bcd0f526b3
If you need something I have removed, download the AROMA installer below. It has all the apps and integration that I have removed from the stock rom in a format you can easily pick and choose what to reinstall. Just install it in recovery and tick any apps you want back! All apps within this installer are also deodexed.
z1slim.re-bloat.v1.zip
MD5: 91416eb62e0ddafd5257da28166fddac
How to install:
YOU WILL LOSE ALL USERDATA ON INTERNAL SDCARD BY DOING THIS. SO BACKUP FIRST!
1: Flash c6903 stock version 534 from this link: https://mega.co.nz/#!K1QD1bSK!JkgNvz3Tqb6lq4brVUEyZGraOjMQuTuzn8IaEFhQhUI
2: Root using bin4rys tool: http://forum.xda-developers.com/showthread.php?p=31545627
3: Install XZ1 DualRecovery 2.7.73 beta from [NUT]'s website: http://forum.xda-developers.com/showthread.php?t=2261606
4: Copy z1slim.flashable.v0.4.zip to external sdcard
4: Reboot into TWRP
5: Click wipe -> Advanced wipe -> Tick dalvik+cache+system+internal data -> swipe to wipe
6: Format data -> Type yes
7: Install z1slim.flashable.v0.4.zip
8: DO NOT REBOOT! Instead go to reboot menu and click power off
9: Flash 290-stripped.ftf using FlashTool
10: Enjoy the rom!
First boot will take a while if you have done a factory reset.
Alternatively if you do not have an external sdcard you can sideload the zip
this is neccessary because we will format internal storage, so it cannot be there.
If you already have a rooted 4.3 ROM installed with XZDR working properly, you can just download the flashable zip, wipe data etc and install it from recovery. If you are coming from a previous version of this ROM then you only need to install the zip. No wipe required.
Changelog:
Version 0.4
-Removed all themes and wallpapers except default
-Removed chrome and put back stock browser
-Removed almost all social integration again (Didnt break rom this time!)
+Updated DualRecovery to 2.7.73 Beta (thanks again [NUT]!)
+Updated all sony apps that are left
+Updated Google play store
+Added white balance settings and a script to reapply settings at boot (Thanks to RyokoN!)
+Deodexed apps and framework
Version 0.3
-Removed further O2 customization
+Added social network integration again as it broke the ROM
+Adblock hosts file
+Customized the install script
Version 0.2
-Removed the rest of the bloat + apps you can get from market
-Removed social network integration
+Stock bootanimation
+Fixed full root (System now mounts R/W on LB)
+Fixed language selection appearing every boot
Version 0.1
-Based on 14.2.A.0.290_O2-UK
-Removed O2 Branding
-Removed all useless bloatware apps
-Removed anonymous statistics
-Removed My Xperia app
-Removed stock browser as chrome is included
+Rooted (LB & UB) by [NUT]
+DualRecovery 2.7.71 by [NUT]
+SuperSU by Chainfire
Bugs:
None known as of now with the base rom.
When restoring twitter integration there seems to be an issue signing in. Twitter app works fine though. - Thanks to sg1969 for finding this.
Credits:
[NUT] for kitchen + 4.3 Root + XZ1 DualRecovery (damn he's good!) - Click here to donate to [NUT]
Chainfire for SuperSU
zyclops1 for figuring out which rom we had to start from
BSDgeek_Jake - Adblock hosts file
RyokoN - White balance settings port
Myself
If I have missed anyone, give me a slap in a pm.
DONATIONS ARE NOT REQUIRED! But if you want to thank me for my work, I wouldn't say no.
Click here to buy me a beer!
If you want to use this as a base for your own ROM. You are welcome to. Please just give me and the other guys some credit!
XDA:DevDB Information
z1slim, a ROM for the Sony Xperia Z1
Contributors
GavTheStoner
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock 14.1.G.1.534 firmware or working 4.3 with recovery and root
Based On: Stock 4.3 version 290
Version Information
Status: Beta
Current Beta Version: 0.4
Beta Release Date: 2014-01-13
Created 2014-01-08
Last Updated 2014-01-18
Reserved.
Good to see more DEVS here and there, let me give you an advice, people will not go back to 534 if they're already in .290 with working recovery, because i didnt go back to 534 since the first semi-rooted 290 i had to always flash the flashable recovery that i had! now if you read the NUT thread you can figure out that if you already have a working recovery or you were on any 290 from iHackers or ROMAUR or even Monx you'll be able to just flash the update zip that is in the NUT to get Full ROOT!
anyways that was only my opinion
Thanks and good luck.
Nice mate.
You are not taking anything more than others who are posting stupid things like - "new album upgrade".
Learn and upgrade your ROM, we need good guys here.
Maybe this isn't heavy development but it's one step up and I'm 100% sure it'll be great ROM one day.
You are creating something new, unlike some others guys who are constantly whining and doesn't contribute this community at all.
BTW what @Simow.b saying is correct, you should add that in OP.
Just write: if you are already on 290 or any ROM with working recovery just flash ROM through recovery, flash recovery, power of, flash ftf and restart.
:thumbup:
Sent from my C6903 using Tapatalk
funky0308 said:
Nice mate.
You are not taking anything more than others who are posting stupid things like - "new album upgrade".
Learn and upgrade your ROM, we need good guys here.
Maybe this isn't heavy development but it's one step up and I'm 100% sure it'll be great ROM one day.
You are creating something new, unlike some others guys who are constantly whining and doesn't contribute this community at all.
BTW what @Simow.b saying is correct, you should add that in OP.
Just write: if you are already on 290 or any ROM with working recovery just flash ROM through recovery, flash recovery, power of, flash ftf and restart.
:thumbup:
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
Thank you for the kind words my friend
Simow.b said:
Thank you for the kind words my friend
Click to expand...
Click to collapse
We have to support guys who are willing to take their free time and work for us - free.
Someone will make something smaller, someone will make something big - but that's not important, what's important is that they are trying and learning and that's great.
Sent from my C6903 using Tapatalk
funky0308 said:
We have to support guys who are willing to take their free time and work for us - free.
Someone will make something smaller, someone will make something big - but that's not important, what's important is that they are trying and learning and that's great.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
I agree with that !
Simow.b said:
Good to see more DEVS here and there, let me give you an advice, people will not go back to 534 if they're already in .290 with working recovery, because i didnt go back to 534 since the first semi-rooted 290 i had to always flash the flashable recovery that i had! now if you read the NUT thread you can figure out that if you already have a working recovery or you were on any 290 from iHackers or ROMAUR or even Monx you'll be able to just flash the update zip that is in the NUT to get Full ROOT!
anyways that was only my opinion
Thanks and good luck.
Click to expand...
Click to collapse
So is there way to get recovery back I run ihackers but I don't see any recovery?
adamo86 said:
So is there way to get recovery back I run ihackers but I don't see any recovery?
Click to expand...
Click to collapse
Try to flash the latest windows recovery from NUT and follow the steps:
1- Make sure you have USB debugging turned ON.
2- download XZ/ZL/TabZ/Z1/ZU-lockeddualrecovery[VERSION]-BETA.installer.zip from http://nut.xperia-files.com
Windows:
3- unpack at C: or somewhere you will remember!
4- navigate to the resulting directory and look for install.bat, double click it to run;
let me know if this worked for you
Simow.b said:
Try to flash the latest windows recovery from NUT and follow the steps:
1- Make sure you have USB debugging turned ON.
2- download XZ/ZL/TabZ/Z1/ZU-lockeddualrecovery[VERSION]-BETA.installer.zip from http://nut.xperia-files.com
Windows:
3- unpack at C: or somewhere you will remember!
4- navigate to the resulting directory and look for install.bat, double click it to run;
let me know if this worked for you
Click to expand...
Click to collapse
I can't see the version you mentioned in the link.
I'm on LB so would it work I have partial root though.
adamo86 said:
I can't see the version you mentioned in the link.
I'm on LB so would it work I have partial root though.
Click to expand...
Click to collapse
i'm also on LB here's the windows version
http://nut.xperia-files.com/?dlid=WjEtbG9ja2VkZHVhbHJlY292ZXJ5Mi43LjcxLUJFVEEuaW5zdGFsbGVy
and after that flash this:
http://nut.xperia-files.com/?dlid=WjEtbG9ja2VkZHVhbHJlY292ZXJ5Mi43LjcxLUJFVEEuZmxhc2hhYmxl
you could always try my friend if it doesnt work then you should do the steps again from 534 but this time when installing the recovery install the one that i have posted now.
Simow.b said:
i'm also on LB here's the windows version
http://nut.xperia-files.com/?dlid=WjEtbG9ja2VkZHVhbHJlY292ZXJ5Mi43LjcxLUJFVEEuaW5zdGFsbGVy
and after that flash this:
http://nut.xperia-files.com/?dlid=WjEtbG9ja2VkZHVhbHJlY292ZXJ5Mi43LjcxLUJFVEEuZmxhc2hhYmxl
you could always try my friend if it doesnt work then you should do the steps again from 534 but this time when installing the recovery install the one that i have posted now.
Click to expand...
Click to collapse
I won't fall any boot or brick problems would I.thanks
adamo86 said:
I won't fall any boot or brick problems would I.thanks
Click to expand...
Click to collapse
if everything's goes well then you will get a fully working recovery plus a nice full rooted ROM!
if not then you should just do the steps from NUT thread and you'll be fine
Simow.b said:
if everything's goes well then you will get a fully working recovery plus a nice full rooted ROM!
if not then you should just do the steps from NUT thread and you'll be fine
Click to expand...
Click to collapse
Link please
adamo86 said:
Link please
Click to expand...
Click to collapse
Here you go :
http://forum.xda-developers.com/showthread.php?t=2572988
Simow.b said:
Here you go :
http://forum.xda-developers.com/showthread.php?t=2572988
Click to expand...
Click to collapse
Didn't work the phone reboots back up dosent go into recovery.
Jonster111 - Nobody is forcing you to click on this thread or download this ROM. It is quite apparent what it is from both the thread title and the description in the first post.
Thanks Simow.b and funky0308 for the real support
Who knows, maybe this will one day be a base for a proper modified rom. Until then, I still need to remove the useless rubbish!
----
Ive just noticed that its not really got full root so have to fix that too. Cant mount system R/W but have got latest XZDR... Weird.
adamo06 please follow the guide in [NUT]'s thread properly. You need to download the 534 version from his OP to get the rom to install properly, or at least have a rooted 257 with recovery already. Also, please take discussion about that to the appropriate thread.
adamo86 said:
Didn't work the phone reboots back up dosent go into recovery.
Click to expand...
Click to collapse
Follow my steps then:
1- flash 534 using flashtool
2- root it using bin4ry's tools
3- install NUT recovery (the ones that i have given) install windows version and when you're on the recovery flash the one that is flashable! do not reboot!
4- flash the 290 from any DEV i would recommend iHackers v2.0 do not reboot!
5- flash xposed for lb from Monx and again (do not reboot! )
6- flash the update zip for 290 from NUT thread
7- wipe cache/dalvik
8- power off the phone from recovery
9- flash the kernel for 290
10- boot the phone and wait!
Hope this helps now
---------- Post added at 03:00 PM ---------- Previous post was at 02:58 PM ----------
GavTheStoner said:
Jonster111 - Nobody is forcing you to click on this thread or download this ROM. It is quite apparent what it is from both the thread title and the description in the first post.
Thanks Simow.b and funky0308 for the real support
Who knows, maybe this will one day be a base for a proper modified rom. Until then, I still need to remove the useless rubbish!
----
Ive just noticed that its not really got full root so have to fix that too. Cant mount system R/W but have got latest XZDR... Weird.
Click to expand...
Click to collapse
You're always welcome my friend
Version 0.2 was pulled due to a fatal bug.
Version 0.3
-Removed further O2 customization
+Added social network integration again as it broke the ROM
+Adblock hosts file
+Customized the install script
Hello everyone!
I shall not complicate things! xD
I present to you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.
.
.
*What about the features?*
Phew!
*Now show them some screenshots.*
Oh yeah,screenshots,those things!
Instructions too?
*Yeah...*
PS. Not my problem if you get your head stuck in a toaster!
And then the download button,right?
*............*
Guys,there is no music player,so I warmly suggest you install Phonograph.
Also,my favorite launcher and also a suggestion,ASAP Launcher
I FORBID anyone to use the wallpaper or any other thing I had my hands in WITHOUT MY PERMISSION in their work.
XDA:DevDB Information
Project MATERIAL, ROM for the Alcatel Onetouch Idol 3
Contributors
The Marionette
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Beta
Created 2016-07-13
Last Updated 2016-07-13
Reserved
1. In order to root the device,you need to download the latest version of SuperSU BETA:
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
or if that doesn't work,download the 2.74 version:
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip
Then enter TWRP and write this in the terminal:
Code:
echo SYSTEMLESS=true >> /data/.supersu
After doing that,flash the SuperSU zip.
2. Aaaaaaaand,for those who want dual sim enabled,flash this right after flashing the rom!
DOWNLOAD
3. Also,if you want to make sure your LTE/dual sim truly works,flash the variant-specific modem zip by famewolf!
Grab yours HERE
4. Not to mention the optional flashable zips of removed Alcatel apps(their icons have been themed into Material Design icons,do not fret! )
DOWNLOAD
5. Those who lost WIFI have to wipe everything(except the storage,of course),flash THIS zip and then flash the rom!
6. Repeating myself,but anyhow,here is a link to the post by famewolf for those who want to switch between fastboot capability and MM!
HERE
Looks great. Download link?
Plus, I agree - ASAP Launcher rocks.
Sent from my 6045X using Tapatalk
The Marionette said:
In order to root the device,you need to download the altest version of SuperSU BETA:
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Then enter TWRP and write this in the terminal:
Code:
echo=SYSTEMLESS=true >> /data/.supersu
After doing that,flash the SuperSU zip.
Aaaaaaaand,for those who want dual sim enabled,flash this right after flashing the rom!
https://www.androidfilehost.com/?fid=24591000424946905
Also,if you want to make sure your LTE/dual sim truly works,flash the variant-specific modem zip by famewolf!
Grab yours HERE
Repeating myself,but anyhow,here is a link to the post by famewolf for those who want to switch between fastboot capability and MM!
Aaaaaand,to be able to switch between fastboot capabilities and MM,go HERE[/B]
Click to expand...
Click to collapse
Good Job!
EDIT:Analyzed your DualSim.zip
Looks Like that you messed up with uploading..
Why are you adding folders which don't need and in your updater script there's lines to delete system apps.
Yeah. Looks awesome. A rom refined.
GAPPS included ? Seems yes in the screens, but never know. Thanks you @The Marionette for providing us such great work.
Also, as I've lost a few the discussion thread & issue with MM dev : My phone is 6045Y, in Europe. May I get problem with LTE or data network with that rom ? Also, would I be able to restore as usual if something goes wrong ?
Sorry if that has already been discussed, but so many answers about this, I couldn't stay up to date, above all when you're not spending your life on forums.
frankee207 said:
Yeah. Looks awesome. A rom refined.
GAPPS included ? Seems yes in the screens, but never know. Thanks you @The Marionette for providing us such great work.
Also, as I've lost a few the discussion thread & issue with MM dev : My phone is 6045Y, in Europe. May I get problem with LTE or data network with that rom ? Also, would I be able to restore as usual if something goes wrong ?
Sorry if that has already been discussed, but so many answers about this, I couldn't stay up to date, above all when you're not spending your life on forums.
Click to expand...
Click to collapse
Yep,yep,gapps are inside the rom.
As for LTE,look at the second post,I added a link to famewolfs variant specific modem download folder. Just flash the one for your variant before flashing the rom!
You can always restore over TWRP or over Mobile Upgrade Q,no need to worry. U.U
The Marionette said:
Yep,yep,gapps are inside the rom.
As for LTE,look at the second post,I added a link to famewolfs variant specific modem download folder. Just flash the one for your variant before flashing the rom!
You can always restore over TWRP or over Mobile Upgrade Q,no need to worry. U.U
Click to expand...
Click to collapse
OK
Yeah, just saw the link. How stupid I am
flash Before ? Not after ?
frankee207 said:
OK
Yeah, just saw the link. How stupid I am
flash Before ? Not after ?
Click to expand...
Click to collapse
Emm,for my 6045K,I flashed the modem zip before flashing the rom.
Alek Dev said:
Good Job!
EDIT:Analyzed your DualSim.zip
Looks Like that you messed up with uploading..
Why are you adding folders which don't need and in your updater script there's lines to delete system apps.
Click to expand...
Click to collapse
I made a universal flashable zip,and then I just add/remove files. Those empty folders don't affect anything as long as I don't put an app in them. You don't need to worry.
The Marionette said:
I made a universal flashable zip,and then I just add/remove files. Those empty folders don't affect anything as long as I don't put an app in them. You don't need to worry.
Click to expand...
Click to collapse
i send you Pm but anyway you reply here But updater script delete System Apps look it....
delete("/system/build.prop");
delete_recursive("/system/app/Browser");
delete_recursive("/system/app/Compass");
delete_recursive("/system/app/HoloSpiralWallpaper");
delete_recursive("/system/app/Newsstand");
delete_recursive("/system/app/TctCalculator");
delete_recursive("/system/app/TctNote");
delete_recursive("/system/app/TctWeather");
delete_recursive("/system/priv-app/Calendar");
delete_recursive("/system/priv-app/Dialer");
delete_recursive("/system/priv-app/DownloadProvider");
delete_recursive("/system/priv-app/Gallery");
delete_recursive("/system/priv-app/GalleryNext");
delete_recursive("/system/priv-app/JrdFota");
delete_recursive("/system/priv-app/JrdTag");
delete_recursive("/system/priv-app/Launcher");
delete_recursive("/system/priv-app/Mms");
delete_recursive("/system/priv-app/Music");
delete_recursive("/system/priv-app/MusicFX");
delete_recursive("/system/priv-app/Settings");
delete_recursive("/system/priv-app/TctCamera");
delete_recursive("/system/priv-app/TctEmail");
delete_recursive("/system/priv-app/TctExchange");
delete_recursive("/system/priv-app/TctFileManager");
delete_recursive("/system/priv-app/TctFMRadio");
delete_recursive("/system/priv-app/TctSoundRecorder");
delete_recursive("/system/priv-app/TimeTool");
delete("/system/media/shutdownanimation.zip");
delete("/system/media/audio/switch_on_off/Jumping_off.ogg");
delete("/system/media/audio/switch_on_off/Jumping_on.ogg");
Alek Dev said:
But updater script delete System Apps look it....
Click to expand...
Click to collapse
Woops,the wrong zip was modified! xD
Doesn't matter when you flash the modem zips as long as it's AFTER You've run mobile Q, the panasonic eluga software or you've flashed a rom that clobbered your radio.
Fixed the DUAL SIM zip. xD
The Marionette said:
Fixed the DUAL SIM zip. xD
Click to expand...
Click to collapse
Good....Little Suggestion.....It will be good to remove the partitions from ZIp which we don't need it ...To don't replace their modems..
Editn dialer doesn't works Reversible option...I had the same issues on SPB ROM so i think the problem it's changing icons.....
Edit1anorama crashes....
Edit2:There's Music app on Build...
Edit 3:It's really faster... but Sometimes apps like Tapatalk.Fb are crashing
New build online,the quirks(broken music player was still there,something needed to be left out of the zip)
Test it out and report back.
https://www.androidfilehost.com/?fid=24591000424946929
Was just about to flash v1, but I'll try out v2 instead. Downloading it right now.
So, theres no root access.
jerpd3rp said:
So, theres no root access.
Click to expand...
Click to collapse
Did you not read post #2?
http://forum.xda-developers.com/showpost.php?p=67731851&postcount=2
Welp I booted up and everything seems to be working as it should. I'm going to root and use systemless xposed and see what happens.
Update: For some reason supersu didn't flash as systemless even after doing the command in terminal so I'm starting over, but the v2 rom itself booted up just fine.
Welp v2 no issues, rooted/xposed systemless using v85.7 since 86.1 wasn't recognized by the xposed installer even though it installed systemless with no issues twice. Gonna see how long the battery lasts and thank you @The Marionette
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About Stock Debloated VoLTE
Information
Installation
Downloads
This is a fully Stock Debloated ROM (Android 6.0.1) of the MPD24.107-70-1 firmware, with support for VoLTE. This version supports XT1562 and XT1563, single-sim and dual-sim devices.
It is debloated, removing as much intrusive apps and services without losing the features of the Moto Display, Moto Voice and Miracast present in Stock MPD24.107-70-1.
Includes the stock bootlogo with the unlocked bootloader warning disabled.
-INFORMATION-
-Indian Firmware MPD24.107-71-1 (Android 6.0.1 )
-Security Patch Level of October 1, 2016
-Stock bootlogo
-Stock kernel
-Debloated
-Zipaligned
-INSTALLATION INSTRUCTIONS-
- Place ROM in your internal memory
- Wipe data and factory reset
- Wipe cache and dalvik-cache
- Flash ROM using TWRP
- Flash the modem (Only if VoLTE doesn't work)
- Reboot
-INSTALLATION FILES-
ROM
MIRROR [Android File Host]
MODEM MPD24.107-70-1
(DON'T USE RECOVERY, USE FASTBOOT METHOD)
MIRROR [Android File Host]
Installing The Modem Via Fastboot
Step 1. Once the bootloader is unlocked, enable the USB debugging mode on your phone.
Go to Settings > About phone, and then tap "Build number" 7 times to become a developer.
Now go back to Settings, then choose "Developer options".
Find the "USB debugging" option and use its toggle button to enable it.
Accept warning by tapping on the OK button.
Step 2. Now install the USB drivers on your Windows from here.
Step 3. Extract the modem (ZIP or RAR file), if the file INSTALL.CMD does not exist, rename the INSTALL.TXT to INSTALL.CMD.
Step 4. Connect your phone to the computer, wait for the installation of the drivers and run the file INSTALL.CMD.
Step 5. Phone will automatically reboot in fastboot mode, wait for the procedure is completed. After installing the phone will restart in the system again.
Debloat List
/system/app
/system/app/Drive
/system/app/Translate
/system/app/talkback
/system/app/Hangouts
/system/app/HTMLViewer
/system/app/colorservice
/system/app/Bug2GoStub
/system/app/YouTube
/system/app/com.motorola.android.nativedropboxagent
/system/app/MotorolaConnect_Basic
/system/app/PartnerBookmarksProvider
/system/app/Videos
/system/app/GoogleHindiIME
/system/app/BookmarkProvider
/system/app/KoreanIME
/system/app/ZhuyinIME
/system/app/NoiseField
/system/app/EditorsDocs
/system/app/Maps
/system/app/EditorsSheets
/system/app/LauncherConfig
/system/app/EditorsSlides
/system/app/BasicDreams
/system/app/CloudPrint
/system/app/ColorProfiles
/system/app/GooglePinyinIME
/system/app/UserDictionaryProvider
/system/app/com.motorola.android.settings.modemdebug
/system/app/JapaneseIME
/system/app/Photos
/system/app/PhaseBeam
/system/app/MediaShortcuts
/system/app/Music2
/system/app/HoloSpiralWallpaper
/system/priv-app
/system/priv-app/MotoCareInt
/system/priv-app/DemoMode
/system/priv-app/Moodles
/system/priv-app/GuideMe
/system/priv-app/TagGoogle
/system/priv-app/LMIRescueSecurity
/system/priv-app/BodyGuardApp
/system/priv-app/3c_ota
/system/priv-app/DigitalPersonalization
/system/priv-app/CellBroadcastReceiver
/system/priv-app/PreloadContacts
/system/priv-app/MotoCare
/system/etc
/system/etc/motorola/MotoDemo
ROM Firmware Required: Unlocked Bootloader and Custom Recovery (TWRP 3.0.2-r3 Recommended)
Credits
Thanks to @effingbadluck for providing the TWRP backup for the first version of ROM (the second version is based on the complete firmware file).
Thanks to @SuperR. for SuperR's Kitchen and other instructions in the deodex process.
Thanks to @minimale_ldz for the XDRom and your best work in debloat process.
Thanks to you for always providing feedback.
really thanks for this.finally stock flashable rom.can i flash this without wipe?and then reroot etc..i am on stock rom with May security patch.thanks.
Uploading...
kos25k said:
really thanks for this.finally stock flashable rom.can i flash this without wipe?and then reroot etc..i am on stock rom with May security patch.thanks.
Click to expand...
Click to collapse
Hi! If you have the firmware MPD24.107-70, wipe cache and dalvik-cache only.
ok thanks.and then i imagine i have to reflash xposed.zip and generally the flashable zips i have flashed till now..right?
link wrong
problem here also.maybe till uploading..
spowl said:
link wrong
Click to expand...
Click to collapse
kos25k said:
problem here also.maybe till uploading..
Click to expand...
Click to collapse
Sorry, I went to sleep and gave an error in uploading. I am uploading again.
Upload OK.
THANKS. Your roms are fantastic!
did anyone try installing without f.reset?all ok?
Working my simcard again finally, thanks.
Sorry but what is the best way to root here?
Greetings
i successfully rooted the same stable way.supersu 2.62-3 systemless version after f.reset.and also successfully only wiped cache and dalvic from previous version with May security patches.Thanks again the dev for this rom.It is a must rom to have that was missing maaany time now.
Use version 2.79 of SuperSU edited by me for MXP Stock:
https://www.androidfilehost.com/?fid=529152257862692595
Sent from my XT1562 using XDA-Developers Legacy app
is systemless?
Can I add the sound mods as it was in your previous versions? This is the type of ROM I wanted for myself without root and my Pokemon go also works haha! I will definitely root the phone again but want to make sure if I can add sound mods to this?
Sent from my XT1562 using Tapatalk
Flashed over stock 24.107.70 (really stock, not a debloat) using TWRP r5. Wiped Cache and Dalvik. Re-flashed SuperSU from post #14, a kernel, and the latest Xposed. Everything seems to work, all apps and their state/options were kept.
Bluetooth an wifi not work simultaneously
Bluetooth an wifi not work simultaneously
Magiks Systemless SuperSU and Xposed work flawlessly
VOLTE not working for me. Any suggestions?
Team Win Recovery Project 3.3.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Exynos ONLY.
In NO way it is compatible with Snapdragon variants including but not limited to American(U/A/T/P/V), Chinese(0/8/6), Hong Kong(0), Japanese(SC-*), Canadian(W) variants.
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
4. All apps that use KNOX like Samsung pay, Secure Folder and maybe more will no more work
Download: Note 10(Exynos variants - N970/971/975/976/N/F/B)
Download
Sources:
TWRP Tree and kernel source
Changelog:
15.12.2019
- Updated TWRP for Android 10.0
- From now on no more Magisk Prepatched images (if you need it patch it byself or flash my kernel where patched recovery is not needed)
22.09.2019
-Reverted MTP Changes from last build since for some mtp dont worked in system
21.09.2019
- Fixed the bug that mtp dont worked any more on TWRP when usb cable got disconnected and reconnected
- Modded Kernel for have MTP in TWRP, Samsung Roms and GSI roms (for GSI Roms flash GSI_MTP_ENABLER.zip)
- Reverted FFS MTP changes since new way is more stable
14.09.2019
- Fixed MTP using FFS_MTP in recovery (Thx to @bigbiff for add FFS MTP support on TWRP 3.3.0. FFS_MTP dont corrupts large files like the mtp used by samsung in the roms)
- Removed File Based backups because the phone refuses to boot from filebased backups since they breaks the rootfs
27.08.2019
-Initial Release
Bugs:
-No one
Telegram Group
https://t.me/twrp_n10
XDA:DevDB Information
[RECOVERY] TWRP for Galaxy Note 10 (Exynos), Kernel for the Samsung Galaxy Note 10
Contributors
geiti94
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2019-08-27
Created 2019-08-27
Last Updated 2019-12-15
Guide:
Go to Developer settings and enable oem unlock
power off the device and boot in download mode with power + vol down buttons and plug in the usb (make sure usb cable is connected to the pc)
in download mode you see the long press vol up option for unlock bl
unlock the bootloader (that will wipe your device so be sure you made a backup of your data)
after bootloader unlock boot up the phone and make sure it is connected to the internet or he triggers rmm prenormal
setup the phone without google account etc
reboot in download mode and flash twrp tar for your device with odin in the AP field (if you want to patch twrp byself patch the downloaded tar in magisk manager. patched tar is in downloads folder after patch)
hold vol up + power button while odin is flashing until you are in twrp.
format data in twrp
flash the disabler that is on TWRP download link
flash my kernel avaiable here
press reboot to system in twrp.
so since i am not all the time here on xda here is a telegram group link. use it for report bugs etc since i dont read all the time the complete thread here https://t.me/twrp_n10
so multidisabler is updated to v2 and stock rom boots again normaly sammy added 2 more encryption in the n10 that needed to get disabled
Magisk Patched builds are now uploaded too for the one that dont wants to patch byself
Great work! Stuck with the snapdragon hopefully something pops up for us.
Thanks! For some reason it doesn't detect my sim after flashing this. Anyone else have this issue?
I've got root working fine but no TWRP yet
is it once rooted there is no way to get back Samsung pay ?
Also I root my phones only for Ads away for youtube app and youtube app being able to play in the background with screen off
Is there any ways we can have these without rooting ?
bboyalanleung123 said:
is it once rooted there is no way to get back Samsung pay ?
Also I root my phones only for Ads away for youtube app and youtube app being able to play in the background with screen off
Is there any ways we can have these without rooting ?
Click to expand...
Click to collapse
Easy, just Pay for premium YouTube
bboyalanleung123 said:
is it once rooted there is no way to get back Samsung pay ?
Also I root my phones only for Ads away for youtube app and youtube app being able to play in the background with screen off
Is there any ways we can have these without rooting ?[/QUOTE
Youtube vance
Click to expand...
Click to collapse
No root needed for that
ahno banaag said:
bboyalanleung123 said:
is it once rooted there is no way to get back Samsung pay ?
Also I root my phones only for Ads away for youtube app and youtube app being able to play in the background with screen off
Is there any ways we can have these without rooting ?[/QUOTE
Youtube vance
Click to expand...
Click to collapse
If you root your phone just for you tube ad away you don't need. Just install you tube vanced for not rooted phone and you good to go ?
Click to expand...
Click to collapse
Gilad.i said:
ahno banaag said:
If you root your phone just for you tube ad away you don't need. Just install you tube vanced for not rooted phone and you good to go
Click to expand...
Click to collapse
Don't forget to install micro g with YouTube vanced too.
I used to root just for adaway and YouTube mods, but with ad guard and YouTube vanced I feel I no longer need to root my devices.
Click to expand...
Click to collapse
nvm
So ASHE sources are out. Today after work i will upload ASHE builds for all 4 modells
So new builds are uploaded and note 10+ bootloop issue is fixed (magisk manager corrupted me recovery.img on last builds)
so today again a big update will be here and thats twrp with working mtp in system and recovery
so new builds with working mtp are uploaded
geiti94 said:
Guide:
......
7. reboot in download mode and flash the magisk prepatched tar for your device with odin in the AP field (if you want to patch twrp byself download unpatched tar and select it in magisk manager. patched tar is in downloads folder after patch)
.......
9. flash the multidisabler zip by ian in twrp
........
Click to expand...
Click to collapse
Hello,
I hope you're fine sir,
I just got my Note 10 plus and about to root it,
However, I am a bit lost when you said magisk prepatched and unpatched, what is the difference...?
Also, for the multidisabler , there are formatting steps, so should I do your steps and do the multidisabler thread steps, or yours are enough...?
I just want a perfect flash, I had a terrible experience with my Note 9 unfortunately due to misunderstanding the steps...:crying:
For now, I'll be backing up and completing all the steps required before I move on the new phone...
I do hope you or anyone else sees this and guides me through...:fingers-crossed:
Bless you and all developers and helpers :good::angel:
SPMelly said:
Thanks! For some reason it doesn't detect my sim after flashing this. Anyone else have this issue?
I've got root working fine but no TWRP yet
Click to expand...
Click to collapse
I have the same problem, I have magisk and TWRP but it doesn't detect sim. did you find a solution?
SPMelly said:
Thanks! For some reason it doesn't detect my sim after flashing this. Anyone else have this issue?
I've got root working fine but no TWRP yet
Click to expand...
Click to collapse
Okay. I have solved it by flashing the original firmware downloaded from Sam mobile, after that I repeated the steps but I changed the AP file since I had downloaded the one from N976, download the correct ones for N975 and it was fixed. I already recognized the SIM
Help, cant backup the system image.
Hi, i need some help.
I had n975 and twrp 3.3.1 ASHE install with magisk patched.
I still on stock rom with magisk. I tried to backup using twrp. When backing up system image(about 6 gb), it failed.
I am manage to backup others like modem, recovery and others.
What should I do to backup system?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BeyondRom v6.4
Based on Android 13 G98xF(B)XXUHHWED firmware
Supported Devices: G980F, G981B, G985F, G986B and G988B
ROM Features
<*>Supported devices: G980F (S20), G981B (S20 5G), G985F (S20+), G986B (S20+ 5G) and G988B (S20 Ultra)</*>
<*>Base OneUI 5.1 Android 13 G98xF(B)XXUHHWED deodex June 2023 patch level</*>
<*>Stock Samsung kernel</*>
<*>CSC features: call recording, camera shutter sound menu, real time network speed in statusbar, etc)</*>
<*>Knox partially removed and ROM light debloated</*>
<*>Screenshots in secure apps allowed</*>
<*>Removed automatic encryption, vaultkeeper services</*>
<*>Few build.prop tweaks</*>
<*>Warning boot screen removed, custom boot animation</*>
<*>Automatic EFS backup</*>
<*>For Safetynet use kdrag0n patch v2.4.x-mod1.x</*>
Not working
<*>Some knox related apps: Samsung Pay, Samsung AutoFill</*>
Changelog v6.4
<*>Updated to latest HWED June 2023 OneUI 5.1 patch level</*>
<*>Kernel patched with magisk canary 26101l</*>
<*>Stock SHealth fix (tbc)</*>
Notes
<*>Install magisk canary 26201 app in TWRP</*>
Credits
- John Wu for Magisk
- Mr. Waehere for CRB kitchen
- corsicanu for S20 TWRP
- aliwaris for incallui mods
- dutchman89 for the new boot animation
- Alan Thomas for sammy disarm script
- LeeXDA18 for some fixes and porting Object remover mod from S23
- Nguyen for back2kill mod
- All testing team
Download Links
G98xFB BR64 HWED Link
Official TWRP thread for S20 Series
Installation procedure
IS MANDATORY TO BE ON A13 AT LEAST HWCG/HWD4/HWED FW BEFORE FLASHING BR 64 !!!
Dirty flash of BR 6.x over any Android 12 will brick your device !!!
0) Backup ALL your important files to PC, ext drives, etc
1) Download and copy the latest BR ROM zip into your external storage or USB stick if you're on stock fw encrypted
2) Download latest stock FW for your phone model using Frija or Samfw and unpack it on your PC
3) Boot in download mode (Vol Up + Vol Down + plug the USB cable connected already to PC) and load up Odin on PC
Don't use USB adapters otherwise you might get issues flashing FW in Odin
Turn off Auto Reboot in Odin
4) Select files BL, AP, CP & HOME_CSC (keep data)
**do not start flash yet
5) Download latest compatible TWRP for your specific device from the official TWRP xda thread (link above), rename it to recovery.img. Download the patched vbmeta.img file from below. Using 7Zip app add the 2 files (recovery.img and vbmeta.img) into a .tar file.
6) Add the above twrp + vbmeta patched.tar file into the USERDATA slot in Odin
7) Uncheck the auto reboot option in Odin and start the flashing
8) When flashing completes (keep usb plugged in !!!), hold Vol Down + Power buttons and then as soon as the screen goes black hold Vol Up + Power buttons to boot to recovery
*be warned first time you boot into recovery it will initialize and then reboot so just keep the buttons Vol Up + Power buttons pressed longer
**if you boot in stock FW, your data will be encrypted and you'll need to wipe your data before flashing BR 3.x
9) When boot in TWRP, wipe your data if you're encrypted, flash BR 5.x zip and then reboot to system
10) After the first boot, install Magisk Manager if necessary; when you'll start Magisk Manager for the first time, reply with YES (agree to reboot) after MM have setup your root environment
*after reboot, go to Magisk Manager settings and toggle On Zygisk
10) Enjoy....
1. Backup to PC all your important files: documents, pictures, contacts, SMS, etc. BEFORE starting to flash anything
2. If you have issues booting the ROM, try the clean flash
3. To boot into TWRP you need to use a USB cable connected to PC (same for DL mode) or a USB stick
4. If you like my work, consider buying me a coffee (PayPal link)
Helpful links
S20 series Root and FW upgrade
BeyondROM S20 Telegram chat
PayPal link
Happy flashing good people!
reserved
I've never been first to comment on a thread after the OP, but there's always a first!
Installing anxiously now and will report back with results
Working perfect on G985F. Great work as always Andrei. Thank You!
Impossible to download.
If I have BeyondRom V1.5 installed and have root can I install BeyondRom V2.0 in recovery as dirty instalation? or I have to do all 10 steps as you wrote?
nijoo said:
If I have BeyondRom V1.5 installed and have root can I install BeyondRom V2.0 in recovery as dirty instalation? or I have to do all 10 steps as you wrote?
Click to expand...
Click to collapse
No you should not be able to. And yes follow steps. You need to change your bootloader, modem etc.
Disappointing, I followed your directions to the letter and I have a soft bricked 985f. I have tried to flash 3 times now. I flashed and it goes all the way to pass but then when I try to boot twrp it sits there. Yes I'm plugged in to my pc, even tried multiple cords and ports and clean install, never can get to twrp. Gotta sleep, hopefully it doesn't burn in overnight since I can't shut it off.
I second that. Works perfectly on my 985f
jhr5474 said:
Disappointing, I followed your directions to the letter and I have a soft bricked 985f. I have tried to flash 3 times now. I flashed and it goes all the way to pass but then when I try to boot twrp it sits there. Yes I'm plugged in to my pc, even tried multiple cords and ports and clean install, never can get to twrp. Gotta sleep, hopefully it doesn't burn in overnight since I can't shut it off.
Click to expand...
Click to collapse
Show me the content of the twrp tar you flash
You are great man. Thank you.
Looking forward to install it on my g980f
I used the vmbeta.img and the ianmcd recovery, i made them into a tar with 7zip and I renamed it to recovery.img before combining. I even copied and pasted the name you said to name it. Could we get a link to the correct twrp?
I agree it has to be the twrp, but I got the one mentioned off of telegram the twrp telegram by ian.
that is the twrp i used.
Hi mate
Thx for all of it
i installed on 988B working correctly
By the way, has anyone tried install xposed ?
jhr5474 said:
I used the vmbeta.img and the ianmcd recovery, i made them into a tar with 7zip and I renamed it to recovery.img before combining. I even copied and pasted the name you said to name it. Could we get a link to the correct twrp?
I agree it has to be the twrp, but I got the one mentioned off of telegram the twrp telegram by ian.
View attachment 5158181 that is the twrp i used.
Click to expand...
Click to collapse
I made the mistake of not resetting odin, as soon as I reset odin i was able to flash recovery and then rom, thank you !!!!
Twrp 1a28 BeyondRom 2.0 not installing.
Twrp 1a23 BeyondRom 2.0 smoothly installing.
LENO7 said:
Twrp 1a28 BeyondRom 2.0 not installing.
Twrp 1a23 BeyondRom 2.0 smoothly installing.
Click to expand...
Click to collapse
What do you mean not installing? Get any errors? Many people already installed it.
Any chance someone could pretty please post a link for the Stock FW as well posted here.
The https://samdb.org/firmware/ and https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/ pages are SOOOOOO slow. Can barely download the files.
AMDPOWERFIST said:
Any chance someone could pretty please post a link for the Stock FW as well posted here.
The https://samdb.org/firmware/ and https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/ pages are SOOOOOO slow. Can barely download the files.
Click to expand...
Click to collapse
Use Samfirm or Frija. They're super fast
AMDPOWERFIST said:
Any chance someone could pretty please post a link for the Stock FW as well posted here.
The https://samdb.org/firmware/ and https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/ pages are SOOOOOO slow. Can barely download the files.
Click to expand...
Click to collapse
Hi Dude
you can use this gdrive link its superfast also
Google Drive - Virus scan warning
drive.google.com