Related
Hi,
last night this problem just came out of nowhere. I was texting and calling fine like hour before I noticed it happen, but whenever I try to call it hangs up, and whenever I try to text it tells me to try again when service is available. On the lock screen it tells me "Emergency Calls Only", but sometimes it shows "Virgin" I'm with Virgin Mobile Canada, but still doesn't work. I've tried the following:
1. Pulling out battery and putting it back in.
2. Nandroid restore to when I first rooted it, and when it was working fine.
3. Take out SIM card, battery, and memory stick
4. Putting it into airplane mode and disabling airplane mode about 30 seconds later.
5. Unrooted to original Bell Stock Rom image from a thread and now have normal recovery
6.Data/factory reset
The only thing I do have a possible lead on is that yesterday I created a recovery tar file, from a recovery image I got from cwm website under AT&T, thought it was also for Bell (Model wise) as well, so don't know if that's the case, does that have to do with anything? I'm back to stock recovery and rom and from a thread here: http://forum.xda-developers.com/showthread.php?t=1739426 and downloaded the Bell/Virgin image, and flashed with Odin, I am back to stock, but still did not fix issue. It says Virgin on the top sometimes, and sometimes back to "Emergency calls only" could the recovery flash have changed radio or something? I also did do a restore before I flashed the new recovery and when phone was being normal just before unrooting but that also didn't work. Now I am unrooted and not on custom recovery. But still no service. Most of the time the service is 1 bar, but even when it's on 5 for like 10 seconds, it still doesn't work. Is it me or my carrier? I also noticed that even when the signal shows full strength it tells me "Emergency Calls Only". Thanks for the help.
I'd call Virgin and ask if your service was interrupted for any reason.
Yeah I'm going to do that, but I just looked at the IMEI number on the back of the phone, and looked at it in settings, but it did not match the number it had at the back. It just says 0 in the phone settings. Does that have anything to do with it? I wanna know if this is has anything to do with that first before calling.
EDIT: Okay so I did some research and yes that is apparently the problem, so I rerooted to custom recovery, and followed this guide: http://forum.xda-developers.com/showthread.php?t=1801997 my IMEI is back, and matches, and it says "Virgin" now at the top of my lockscreen, but still, I can't send messages or call. Did the deleting of IMEI also delete something else I should restore? Or is it something on their side? I am connected to Virgin Mobile, but the connection is extremely weak, and does not complete any calls or texts. There's also "IMEI SV" under settings and it says "01" is that an issue?
EDIT 2: Nevermind I just had to follow post 3 after fixing IMEI in that thread I linked and it worked! In case you researched and got here. Follow thread I linked up.
rise chicken
I'd like to resurrect this thread for a moment. Papaniz's problem is exactly like mine, same carrier & country.. but the link is dead.. any idea what the process was or where another link might be? Thanks Guys
tutorialhedz said:
I'd like to resurrect this thread for a moment. Papaniz's problem is exactly like mine, same carrier & country.. but the link is dead.. any idea what the process was or where another link might be? Thanks Guys
Click to expand...
Click to collapse
The thread was remove to avoid illegal problem. You'll most likely have to look somewhere else to recover your IMEI if flashing stock firmware doesn't fix it.
So I have been waiting patiently for the 4.3 update to roll out to me OTA with hopes that it would fix my issues but my phone has been saying download interrupted and so I have gone back to completely stock and triangle away to get my device status back to normal but it still wont let me download. When looking around for other possible causes I saw that my build number is JRO03L.I747UCDLK3 which comes up as a build number for a nexus 7, the correct build number for my att should be JRO03C. I have no idea how it got that way but I am wondering if the person who bricked it might have put the wrong version of the bootloader or some other part of the firmware on and it somehow didn't brick but is detecting a conflict and not letting me OTA. Or that is what is causing my cell network issues as well. Wanting input from a a few devs as I am not 100% sure what the first part of the build number represents.
Ok guys and girl, I am having a really weird issue with my Att Gs3 that I wanted to see if anyone could help with. To start off a little bit of background. I Hard bricked my s3 in August, sent it for tag and got it back working and stock with no issues. All I did was root the phone for fear of messing it up again but it was running all stock without problems for over a month since the unbrick. About 3 weeks ago I went out of town within the state but a ways away, I was talking on the phone with a co-worker right before leaving town. At some point that evening I get a a text from my wife asking why I was ignoring her calls, I had never received them and according to my phone was in the middle of prime 4g lte zone in San Antonio but I was apparently only receiving that lte signal and the phone was not switching to the voice network on 4g to make or receive calls, I was even able to voice chat with my wife but I couldn't just call her normally. After returning home I was still unable to make or receive calls unless it was right after a restart and I had to try about 15 times, so I called att and tried all of their bs which didn't make a difference at all. Looking around on the internet I found the number that you can put in to get into service mode and switched it to gsm or wcdma only and voila I could make calls again. The only problem with that being that I travel within a city for work and move from 4g to 3g to edge all the time but if I have it set for wcdma only then I have no signal and have to take the time to pull up service mode to switch back and forth. So I tried going back to completely stock again by resetting/ formatting all and flashing the stock rom via odin, my issue persisted so I also decided to flash synergy rom (which I was running prior to the hard brick) and then intergalactic because I saw the fewest problems with it to no avail. I have flashed each stock modem new and old which made no difference at all. Today I was messing around in service mode and found an area that was called handover, in that subsection you have the option for checking the phones ability to switch from gsm to wcdma and back as well as to hspa, when I select any of those options I get the message "temporary block due to build e" or " temporary block code".
I was wondering if anyone has any ideas about what the possible problem could be, imei, modem hardware, or a stubborn stuck modem firmware setting.
I was also wondering if anyone had any experience with figuring out how to re-enable handover because that is where I feel my problem is, either through adb or any programs that let me force change the settings, I would also be happy if someone knew how to turn of only LTE and have both gsm and wcdma on at the same time.
Any help would be much appreciated, I have tried everything I know how to do, but am to the point where I am forced to look at new hardware because my wife is pregnant and I really needs to be able to get a hold of me any time.
Bump
Bump!...not looking good.
madnesshero86 said:
Ok guys and girl, I am having a really weird issue with my Att Gs3 that I wanted to see if anyone could help with. To start off a little bit of background. I Hard bricked my s3 in August, sent it for Jtag and got it back working and stock with no issues. All I did was root the phone for fear of messing it up again but it was running all stock without problems for over a month since the unbrick. About 3 weeks ago I went out of town within the state but a ways away, I was talking on the phone with a co-worker right before leaving town. At some point that evening I get a a text from my wife asking why I was ignoring her calls, I had never received them and according to my phone was in the middle of prime 4g lte zone in San Antonio but I was apparently only receiving that lte signal and the phone was not switching to the voice network on 4g to make or receive calls, I was even able to voice chat with my wife but I couldn't just call her normally. After returning home I was still unable to make or receive calls unless it was right after a restart and I had to try about 15 times, so I called att and tried all of their bs which didn't make a difference at all. Looking around on the internet I found the number that you can put in to get into service mode and switched it to gsm or wcdma only and voila I could make calls again. The only problem with that being that I travel within a city for work and move from 4g to 3g to edge all the time but if I have it set for wcdma only then I have no signal and have to take the time to pull up service mode to switch back and forth. So I tried going back to completely stock again by resetting/ formatting all and flashing the stock rom via odin, my issue persisted so I also decided to flash synergy rom (which I was running prior to the hard brick) and then intergalactic because I saw the fewest problems with it to no avail. I have flashed each stock modem new and old which made no difference at all. Today I was messing around in service mode and found an area that was called handover, in that subsection you have the option for checking the phones ability to switch from gsm to wcdma and back as well as to hspa, when I select any of those options I get the message "temporary block due to build e" or " temporary block code".
I was wondering if anyone has any ideas about what the possible problem could be, imei, modem hardware, or a stubborn stuck modem firmware setting.
I was also wondering if anyone had any experience with figuring out how to re-enable handover because that is where I feel my problem is, either through adb or any programs that let me force change the settings, I would also be happy if someone knew how to turn of only LTE and have both gsm and wcdma on at the same time.
Any help would be much appreciated, I have tried everything I know how to do, but am to the point where I am forced to look at new hardware because my wife is pregnant and I really needs to be able to get a hold of me any time.
Click to expand...
Click to collapse
if you have CM recovery or TWRP you can go back, wipe everything even twice could help, then flash a stock rom reboot and see what happens
if that doesnt work go back to odin and install stock firmware 4.1.2 from Samsung but again you have to wipe data/factory reset
3rd if that doesnt work, try to restore your EFS folder/files using this link http://forum.xda-developers.com/showthread.php?t=1725839
that link has everything, how to fix it, anything you need to know
BUY a new phone or use a different phone if all the options above fail
Tried
View attachment 2362929
winosxbuntu said:
if you have CM recovery or TWRP you can go back, wipe everything even twice could help, then flash a stock rom reboot and see what happens
if that doesnt work go back to odin and install stock firmware 4.1.2 from Samsung but again you have to wipe data/factory reset
3rd if that doesnt work, try to restore your EFS folder/files using this link http://forum.xda-developers.com/showthread.php?t=1725839
that link has everything, how to fix it, anything you need to know
BUY a new phone or use a different phone if all the options above fail
Click to expand...
Click to collapse
The backup restore/fix imei and data restore tools link doesn't go anywhere, does anyone have a link to the restore tool? The only version I can find is for the non us version of the s3.
I did at least use the tool for the 9300 to find out that I have some 000 for s/n and other numbers (see attachment)
is there a patch out for us gs3's to fix this like there is for the i9300?
madnesshero86 said:
View attachment 2362929
The backup restore/fix imei and data restore tools link doesn't go anywhere, does anyone have a link to the restore tool? The only version I can find is for the non us version of the s3.
I did at least use the tool for the 9300 to find out that I have some 000 for s/n and other numbers (see attachment)
is there a patch out for us gs3's to fix this like there is for the i9300?
Click to expand...
Click to collapse
I think I can help, I just need to pull up some files and I might get you the software or program I used to back -up and restore my EFS folder/files
Even fix it, so plz hang in there........will report back later on
Thanks a bunch, I am still trying all kinds of stuff but I feel pretty certain that the problem lies with a messed up efs and I don't think I have a backup unless doing a nandroid covers that as well, which I am not seeing that it does. Any further help is appreciated, is this something that a local cell repair shop can typically fix or is this a possible new phone situation?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
madnesshero86 said:
Thanks a bunch, I am still trying all kinds of stuff but I feel pretty certain that the problem lies with a messed up efs and I don't think I have a backup unless doing a nandroid covers that as well, which I am not seeing that it does. Any further help is appreciated, is this something that a local cell repair shop can typically fix or is this a possible new phone situation?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
this is the software/programme i used to back-up, recover or even fix my EFS files (if they are corrupt and can be used) NV items reader writer
type it on google and pretty sure you will find something , try different links and again am sure you will find a download
have you tried flashing the new 4.3 stock firmware and modem follow this link for everything http://forum.xda-developers.com/showthread.php?t=2498233 or you can wait for AT&T to release the official 4.3 firmware and that will be 100% satified to be stable and will fix all your EFS/IMEI problems FOR GOOD :laugh:
i have the NV items reader writer software that can fix your problems but i dont know how i can share it with you without breaking any rules
ULTIMATE/final solution send it to MOBILETECHVIDEOS and will fix it like its nothing, take it to samsung and have to play some ball, or BUY A NEW PHONE
tried kernels (idont think it will make any difference) but its good to check
I have tried all the other versions but will try the 4.3 what's the name of that software so I can try and find it or of you have drop box you could pm me the info and get it to me that way . In the meantime I found an fusion 2 for 38 bucks from att so I can get calls for the time being.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
madnesshero86 said:
I have tried all the other versions but will try the 4.3 what's the name of that software so I can try and find it or of you have drop box you could pm me the info and get it to me that way . In the meantime I found an fusion 2 for 38 bucks from att so I can get calls for the time being.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
NV items reader writer
type exactly as it is on google or here on XDA
New Info
See new info in OP Please, and before anyone says anything I have spent half the day searching with various keywords trying to find a fix so be kind if it seems obvious to you, I couldn't find it and I did try.
Bump
so i bought a T999l a few weeks ago had it unlocked, rooted and activated with my existing t-mobile account. For some reason my 4G never worked with them and after several calls they said because my phone was modified they couldn't help me basically. I started with some of the roms from this link http://forum.xda-developers.com/showthread.php?t=2308514 but ended up going back to stock or prob trying to go back to stock because it still says its modified in status of phone. so i was back to 4.1.2 with uvamb7 kernel. I ended up trying sim cards from different carriers and found out that 4g works with at&t sim cards. so the other day i joined aio and finally had 4glte for the first time on this phone. As the days go by though i started noticing it wasnt keeping 4g or 4g lte when i was moving around. As a matter of fact i have to force it to go 4g or lte by either restarting and getting lucky or by using *#2263# and switching sometimes several times from only lte and gsm to automatic or all lte basebands (which gives me lte but i cant make calls or receive calls apparently) and then switching to automatic. Basically if i get lucky and its getting 4glte on automatic it will be fine until i move to a area where there is no lte then its gone until i force it to go lte again even if i get into a area that has lte/4g. Its like its not automatically detecting its in a 4g/lte area, it just stays on edge until i force it. I then tried the 4.3 rom at this link http://forum.xda-developers.com/showthread.php?p=48399478. I sort of got it working but i think i might have been using the wrong kernel because whenever i restart the phone it doesnt load past the galaxy sIII splash screen. If i dont restart however it works but same issue i have to force it to detect when its in a 4g or lte area. So since that wasn't working too well i went back to the stock 4.1.2 setup. So im thinking is this an issue with my antenna or something? I'm still learning this phone so any input would be appreciated. Thanks in advance
If your had updated to stock 4.3 and if the latest version from Samsung contains KNOX in t999l variant, follow this step !
reboot into recovery mode and clear the cache and restart the phone! this should work..!
Sent from my SGH-T999 using Tapatalk
---------- Post added at 12:07 PM ---------- Previous post was at 12:02 PM ----------
If you had updated to stock 4.3 and if the latest version from Samsung contains KNOX in t999l variant, follow this step !
Reboot into recovery mode and clear the cache and restart the phone! this should work..! Make sure you don't root the phone after this...
Sent from my SGH-T999 using Tapatalk
ramkumar19890 said:
If your had updated to stock 4.3 and if the latest version from Samsung contains KNOX in t999l variant, follow this step !
reboot into recovery mode and clear the cache and restart the phone! this should work..!
Sent from my SGH-T999 using Tapatalk
---------- Post added at 12:07 PM ---------- Previous post was at 12:02 PM ----------
If you had updated to stock 4.3 and if the latest version from Samsung contains KNOX in t999l variant, follow this step !
Reboot into recovery mode and clear the cache and restart the phone! this should work..! Make sure you don't root the phone after this...
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
How did you unlock it? Please share. Thanks!
tomprc said:
How did you unlock it? Please share. Thanks!
Click to expand...
Click to collapse
i second this!
tomprc said:
How did you unlock it? Please share. Thanks!
Click to expand...
Click to collapse
i payed 6 bucks on ebay to have it remotely unlocked
ramkumar19890 said:
If your had updated to stock 4.3 and if the latest version from Samsung contains KNOX in t999l variant, follow this step !
reboot into recovery mode and clear the cache and restart the phone! this should work..!
Sent from my SGH-T999 using Tapatalk
---------- Post added at 12:07 PM ---------- Previous post was at 12:02 PM ----------
If you had updated to stock 4.3 and if the latest version from Samsung contains KNOX in t999l variant, follow this step !
Reboot into recovery mode and clear the cache and restart the phone! this should work..! Make sure you don't root the phone after this...
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
i found a t-moblile 4.3 firmware update last night and flashed it using odin. Seems like its not rooted anymore since i'm getting the stock recovery now. I assume wipe cache partition is the same thing right? so i did that and restarted the phone. 4g lte came right up. I make a call and it drops to 4g which is fine considering before it would drop all my data during a call. Here is the thing though after the call it shows full 4g for a couple seconds then no bars, nothing. No data no network and it will consistently do this . im starting to think this phone is possessed
Stop flashing stuff. Odin to stock (4.3 if you have ever flashed 4.3 via odin, 4.1.2 otherwise) and bring it in.
Also, make sure you use the right firmware, or you will hard brick. If you have never flashed 4.3 via Odin, use MB7. If you have flashed 4.3 via Odin, use MK4.
No amount of flashing random stuff will fix your nv data.
Sent from my T999L on PACman
Adreaver said:
Stop flashing stuff. Odin to stock (4.3 if you have ever flashed 4.3 via odin, 4.1.2 otherwise) and bring it in.
Also, make sure you use the right firmware, or you will hard brick. If you have never flashed 4.3 via Odin, use MB7. If you have flashed 4.3 via Odin, use MK4.
No amount of flashing random stuff will fix your nv data.
Sent from my T999L on PACman
Click to expand...
Click to collapse
I did flash MK4 and i bought this phone off ebay. I don't have a warranty with it. Where exactly am i bringing it in to?
If you have the t999L it has warranty... Hasn't been out long enough for warranty to run out
Bring it in to your carrier (tmo?) And have them reprovision it. It sounds like bad nv data, and unless you have a good backup, the carrier is the only one that can fix that.
Sent from my T999L on PACman
I have the same issue
scaredem23 said:
so i bought a T999l a few weeks ago had it unlocked, rooted and activated with my existing t-mobile account. For some reason my 4G never worked with them and after several calls they said because my phone was modified they couldn't help me basically. I started with some of the roms from this link http://forum.xda-developers.com/showthread.php?t=2308514 but ended up going back to stock or prob trying to go back to stock because it still says its modified in status of phone. so i was back to 4.1.2 with uvamb7 kernel. I ended up trying sim cards from different carriers and found out that 4g works with at&t sim cards. so the other day i joined aio and finally had 4glte for the first time on this phone. As the days go by though i started noticing it wasnt keeping 4g or 4g lte when i was moving around. As a matter of fact i have to force it to go 4g or lte by either restarting and getting lucky or by using *#2263# and switching sometimes several times from only lte and gsm to automatic or all lte basebands (which gives me lte but i cant make calls or receive calls apparently) and then switching to automatic. Basically if i get lucky and its getting 4glte on automatic it will be fine until i move to a area where there is no lte then its gone until i force it to go lte again even if i get into a area that has lte/4g. Its like its not automatically detecting its in a 4g/lte area, it just stays on edge until i force it. I then tried the 4.3 rom at this link http://forum.xda-developers.com/showthread.php?p=48399478. I sort of got it working but i think i might have been using the wrong kernel because whenever i restart the phone it doesnt load past the galaxy sIII splash screen. If i dont restart however it works but same issue i have to force it to detect when its in a 4g or lte area. So since that wasn't working too well i went back to the stock 4.1.2 setup. So im thinking is this an issue with my antenna or something? I'm still learning this phone so any input would be appreciated. Thanks in advance
Click to expand...
Click to collapse
I have the same problem, I paid 15 dollars to the unlockpros.com to remotely unlock my T999L. they did unlock it but now 4g data in t mobile is gone, it freeces, on aTT I get 4G but it goes on and off.
I spoke to them and they tried to fix it remotely, the 4g finally appeared again on t mobile network but then after restart same problem again, no 4G data on t mobile,
does anyone has a full NV data backup that I can use to restore?
will a NV backup from another gallaxy 3 work on mines??
hope someone can help.
Don't use anyone else's nv data, major problems if they turn their phone on ever, and legal issues.
Just Odin the root66 mb7 full restore. That will put you to 100% stock, but with root. You can then use triangle a way to reset the flash counter and modified status, then bring it in to tmo. Make sure to tell them not to update you, or you are stuck with the new bootloader. They might update you anyway "for your convenience", just FYI.
Sent from my SGH-T999 using XDA Premium 4 mobile app
Anybody ever have issues with apps? I first had an issue with the stock messages app not allowing me to send out texts to a single person. Been having this issue for about 2 months. Have been in touch with T-Mobile repeatedly and they reset the signals and everything each time to no avail. Last rep I spoke with said to bring it in to a T-Mo store and get them to change out the SIM (in case that was the issue) and get them to do a back-up & reset. That too did not help. Eventually I downloaded the Google Messaging app and through that I'm able to send out normal person to person texts again but not through the stock app.
I've also got issues with apps having updated versions yet the updates aren't available in Google Play Store for me to download. For example, on June 27th, NCP Mobile came out with version 1.8, but it's still not showing. I've been in touch with the National Consumer Panel, and they say as long as I'm running Android 4.0 or higher (actually running 4.3, rooted- stock ROM) I should see the update available.
I've also been experiencing issues with Perk apps (namely Perk Browser and Perk Search & Win) not allowing me to sign in via Facebook or with email and password. Password reset links almost never get sent. The 2 times they did finally send me a reset link it directs me to the Perk homepage also on which I cannot sign in. I'm in touch with them regarding these issues too.
The last app (as of right now) that I am experiencing problems with is CSI: Crime Scene. The app doesn't allow me to connect to facebook to play with friends like I do when I'm on facebook.
Whenever I flash cm 10.2 cm 11 any rom at all I face the problem of no internet. So I go back to stock. I have my baseband, build # important stuff like that. I always have to take out my assert lines. So when I flash any rom the fine line will say;
;Mount
or something like that I delete all the assert lines and I was told to keep assert lines but just change them to my baseband and stuff. Any help would be appreciated. & btw the problem is it says Mobile State: Disconnected. But I'm in service too.
I have the same problem. Been searching for a while and trying different fixes, but doesn't seem to be working. I'm on ATT galaxy S3, tho. If someone's got a working ATT S3 and let me know exactly what ROM, gapp, modem, etc they used, would much appreciate it.
Keyonwise said:
Whenever I flash cm 10.2 cm 11 any rom at all I face the problem of no internet. So I go back to stock. I have my baseband, build # important stuff like that. I always have to take out my assert lines. So when I flash any rom the fine line will say;
;Mount
or something like that I delete all the assert lines and I was told to keep assert lines but just change them to my baseband and stuff. Any help would be appreciated. & btw the problem is it says Mobile State: Disconnected. But I'm in service too.
Click to expand...
Click to collapse
More info is needed, such as carrier. I'm guessing either Virgin Mobile or Boost if you need to remove asserts on any of the pre-unified builds (this would hold true for any ROM that has switched to d2lte from d2spr). If that is the case, then you don't have the correct APN's configured. Also, it usually doesn't hurt to be running the most current modem (MK3 for Sprint, MK5 for VM/Boost). Again, the more info the better, then people don't have to play Twenty Questions in order to get to the heart of the matter.
This may work...
So, after trying countless options that i found on this site, and after dozens of flashing roms, modems, kernels, booloaders, restores, etc... turns out that i was doing everything right and there was nothing wrong with the install or the phone itself. After contacting my carrier (PTEL Mobile) for the third time, (first time they told me they had an outage, second time they told me to set the APN setting correctly - neither of which was incorrect on my end or the cause), they said they will try RESETting the DATA on their end. And guess what - that worked.
If you think you did everything correctly but still not getting data, i suggest you make your provider to do the same, or at least pry them as much as you can about your problem and what they can do about it. I wasted to much time and effort (my poor phone) on this and the solution was simple, and not my fault. Hope this helps others.
Mr. Struck said:
More info is needed, such as carrier. I'm guessing either Virgin Mobile or Boost if you need to remove asserts on any of the pre-unified builds (this would hold true for any ROM that has switched to d2lte from d2spr). If that is the case, then you don't have the correct APN's configured. Also, it usually doesn't hurt to be running the most current modem (MK3 for Sprint, MK5 for VM/Boost). Again, the more info the better, then people don't have to play Twenty Questions in order to get to the heart of the matter.
Click to expand...
Click to collapse
Hiya, I'm currently having the same problem as the OP. Mobile state disconnected but it says I am in service. Using latest version of Philz recovery and I flashed the most recent nightly of the Cyanogenmod 11 -4.4.2 KitKat (April 5th, 2014).Carrier is Virgin Mobile, using Samsung Galaxy SIII SPH-L710. PRL is most recent one 33030 and modem is MK5. I did however, flash the rom without deleting the assert lines, since I did not know I had to delete some assert lines. Any help with this? Thanks.
S0lstice said:
Hiya, I'm currently having the same problem as the OP. Mobile state disconnected but it says I am in service. Using latest version of Philz recovery and I flashed the most recent nightly of the Cyanogenmod 11 -4.4.2 KitKat (April 5th, 2014).Carrier is Virgin Mobile, using Samsung Galaxy SIII SPH-L710. PRL is most recent one 33030 and modem is MK5. I did however, flash the rom without deleting the assert lines, since I did not know I had to delete some assert lines. Any help with this? Thanks.
Click to expand...
Click to collapse
Deleting asserts is only for d2spr specific builds, that doesn't apply to d2lte builds (hence the reference to "pre-unified builds" in my first post). Your issue is most likely also related to APN's. However, there are also known data issues on a lot of the latest CM nightlies, and also on the ROM's that rely heavily on CM as a code source. I would strongly recommend reading the last several pages of the thread for any ROM that falls into this category in order to see what other users are reporting along these lines.
CM11 No Mobile Network
Hey guys,
Noob here. I'm running CM11-20140428-NIGHTLY-jflte on a Galaxy S4 GT-i9507(international, optus) but bootscreen now says 9505(not sure if that's important).
I've had Mobile Network State: Disconnected for the last three nightlies. On CM11 M3 it was working all good, but now no luck.
So I've tried a few things and I've come to the point where I'm going to try the factory reset then reflash CM11 and fingers crossed it will work.
Can anyone talk me through the proper procedure for this? I've made a full backup on my external SD using CWM 6.0.4.7 and transferred it to
computer just in case. So would anyone be awesome enough to take me through it step by step.
Cheers,
hhmmm
Use Rom Manager app and Fix Perrmisson
I install a bunch of roms on my dadz s3 and had 2 DirtyFlash it
And then used Wifi 2 get the app itselfz and it fix'd 88 permission
Idk jus tryn 2 help
Had sumthing 2 do w Gapps causing my issue
CM11 No Mobile Network
Ickyz said:
Use Rom Manager app and Fix Perrmisson
I install a bunch of roms on my dadz s3 and had 2 DirtyFlash it
And then used Wifi 2 get the app itselfz and it fix'd 88 permission
Idk jus tryn 2 help
Had sumthing 2 do w Gapps causing my issue
Click to expand...
Click to collapse
Just Fixed Permissions using Rom Manager, still no good.
Stock no APN settings at all
I have looked everywhere and found nothing for the last 3 weeks. I have a stock, sprint S3 on straight talk (my son's phone) it will not get 4g lte data what so ever. My phone is the exact same phone, and it does get 4g lte data. I tried all the basics ##72786# data on off check airplane mode...nothing. Mobile network state is "disconnected". So I opened data ##3282# to compare apn settings with my phone. I made sure everything matched, and when I get to "LTE APN Settings" I open it up, and nothing is there except APNs nothing, blank. Also missing is "Dial Up Networking" that option does not exist on my son's phone. He updated to kitkat (uggh) but the problem was present before that. Checked the phone, and it is not rooted. Funny thing is the phone updates with 4g lte running after dialing ##72786#, but that goes away after it completes. Texting works, but no mms (pictures etc.) and if I set it to cdma only it gets 3g, otherwise no data at all. Anybody?
Hello, I used a guide outside of xda to flash cm12.1 on my note 2. (GT-N7100.) (To find the guide, search how to flash cm12.1 on note 2 on google and click on the link that says [CM12.1 For Note 2 (Stable ROM) - Information Lord]. I can't post links because I have under 10 posts.) I already tried the fix cellular data guide in the thread, but the terminal emulator thing told me that it was an invalid IP address.
I'm not sure if this is needed but I flashed using Philz. I got it to work yesterday by deleting all the APNs. I then installed the wrong gapps so I had to wipe everything again, and then I tried to delete the APNs again and now that solution won't work for me anymore. I can make calls and texts, just cellular data doesn't work. The status bar shows the signal bars, but with an exclamation mark. However, when I'm connected to wifi the exclamation mark disappears. If I have wifi on but it's not connected, the exclamation mark comes back. I've tried searching everywhere on how to fix this but nothing works for me, that's why I resulted in posting a thread.
Any way you guys can help me? Thanks.
Derpnstar1 said:
Hello, I used a guide outside of xda to flash cm12.1 on my note 2. (GT-N7100.) (To find the guide, search how to flash cm12.1 on note 2 on google and click on the link that says [CM12.1 For Note 2 (Stable ROM) - Information Lord]. I can't post links because I have under 10 posts.) I already tried the fix cellular data guide in the thread, but the terminal emulator thing told me that it was an invalid IP address.
I'm not sure if this is needed but I flashed using Philz. I got it to work yesterday by deleting all the APNs. I then installed the wrong gapps so I had to wipe everything again, and then I tried to delete the APNs again and now that solution won't work for me anymore. I can make calls and texts, just cellular data doesn't work. The status bar shows the signal bars, but with an exclamation mark. However, when I'm connected to wifi the exclamation mark disappears. If I have wifi on but it's not connected, the exclamation mark comes back. I've tried searching everywhere on how to fix this but nothing works for me, that's why I resulted in posting a thread.
Any way you guys can help me? Thanks.
Click to expand...
Click to collapse
Did you try to flash modem as described in many of lollipop question topics?
you can always flash stock rom via odin if you need your phone
yaro666 said:
Did you try to flash modem as described in many of lollipop question topics?
you can always flash stock rom via odin if you need your phone
Click to expand...
Click to collapse
Sorry, forgot to update the thread but I fixed it.
I just added my own APN by searching APN settings for my carrier and now it works
Thanks for the help though.