Develop Bugs

Need Help with Samsung Galaxy Tab SM-T211 Pit File

Dear Friends,
I desperately need help to get my SGT SM-T211 to get to work. I recently flashed the stock rom to my device using ODIN 3.07 but accidently ticked the "Erase All Nand " and my device is now stuck on the Samsung startup swirl without booting into the system. After reading the web solutions I kinda figured out that I need to attach a .pitfile to restore the partitions. If anyone of you could help me with instructions or direct me to any links with the solution I will be very grateful.
Thank you in advance.

Are you sure that you are flacher The right Firmware version?
Have you uncheck The repartion in Odin ?
If not then you need The Pit.file.
1. Can you Boot into The recovery? If yes than male a factory reset.
2. Try again ,and flash The Stockfirmware with Odin.

Are you sure that you are flacher The right Firmware version?
Have you uncheck The repartion in Odin ?
If not then you need The Pit.file.
1. Can you Boot into The recovery? If yes than male a factory reset.
2. Try again ,and flash The Stockfirmware with Odin.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Yes I used the firmware I got from the Samsung site.
1. I cannot Boot into recovery.
2. Flashed using Odin using stock firmware but doesn't go beyond the Samsung Logo.
See attached image.

buddyX said:
Are you sure that you are flacher The right Firmware version?
Have you uncheck The repartion in Odin ?
If not then you need The Pit.file.
1. Can you Boot into The recovery? If yes than male a factory reset.
2. Try again ,and flash The Stockfirmware with Odin.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Yes I used the firmware I got from the Samsung site.
1. I cannot Boot into recovery.
2. Flashed using Odin using stock firmware but doesn't go beyond the
See attached image.
Click to expand...
Click to collapse
Your Tab i think is only softbricked.
In your Situation i will do following things.
Open your Tab , diconect the batterie, press for 20 sec. The power button.
Connect the batterie , abd boot up your tab.
1. Flash a Customrecory, i prefere CWM
2. Flash a stable Custumrom , for example Rockettab in the lite Version.
3. Flash a stable kernel, blackhawk 1.8

bierma32 said:
Your Tab i think is only softbricked.
In your Situation i will do following things.
Open your Tab , diconect the batterie, press for 20 sec. The power button.
Connect the batterie , abd boot up your tab.
1. Flash a Customrecory, i prefere CWM
2. Flash a stable Custumrom , for example Rockettab in the lite Version.
3. Flash a stable kernel, blackhawk 1.8
Click to expand...
Click to collapse
The tablet is stuck on the Samsung Screen with the Samsung Logo continuously illuminating without booting into the home screen.
How can I get the Samsung Galaxy Tab 3 &.0 SM-T211 into fastboot mode? Is it Power + Volume down + Home keys?
Appreciate any help on this because I really miss my tablet.

buddyX said:
The tablet is stuck on the Samsung Screen with thze Samsung Logo continuously illuminating without booting into the home screen.
How can I get the Samsung Galaxy Tab 3 &.0 SM-T211 into fastboot mode? Is it Power + Volume down + Home keys?
Appreciate any help on this because I really miss my tablet.
Click to expand...
Click to collapse
Yes, thats are the buttons to into dowmload mode

I've attached the Tab 3 7.0 PIT file, I believe it's universal between T210 & T211.
Try flashing your Stock ROM without it first, if that doesn't work try with the PIT.
I obtained it from a Stock T211 ROM archive, just unzip it to get the file to use with Odin.

Gilly10 said:
I've attached the Tab 3 7.0 PIT file, I believe it's universal between T210 & T211.
Try flashing your Stock ROM without it first, if that doesn't work try with the PIT.
I obtained it from a Stock T211 ROM archive, just unzip it to get the file to use with Odin.
Click to expand...
Click to collapse
Thank you very much for sharing the .Pit file from your rom, could you kindly share the stock kernel if you have it too.
Thanks in advance.

[Q] the tablet still on no way to turn it off

Hello,
I have a galaxy tab 3.7.0 rootée.
I downloaded and I put it on the external card from my shelf a custom rom. I put my tablet in recovery mode and I made ​​a backup but instead click backup to sdcar1 I chose sdcard0. The backup stopped giving me an error then I immediately reboot the tablet but it hangs logo. I tried turning it off but no way it restarts. I like even put the tablet into recovery mode but the download mode appeared. I flashed the tablet with an official ROM "T210XXAMKE_T210OXXAMK1_XEZ" with Odin307. the flash is done successfully and tablet restarts, update and a tablet is stuck in the logo.
I do not know what to do, help me please. Thank you for reading and responding to my S.O.S
The tablet is still on, no way to turn it off.

hey
imadoid said:
Hello,
I have a galaxy tab 3.7.0 rootée.
I downloaded and I put it on the external card from my shelf a custom rom. I put my tablet in recovery mode and I made ​​a backup but instead click backup to sdcar1 I chose sdcard0. The backup stopped giving me an error then I immediately reboot the tablet but it hangs logo. I tried turning it off but no way it restarts. I like even put the tablet into recovery mode but the download mode appeared. I flashed the tablet with an official ROM "T210XXAMKE_T210OXXAMK1_XEZ" with Odin307. the flash is done successfully and tablet restarts, update and a tablet is stuck in the logo.
I do not know what to do, help me please. Thank you for reading and responding to my S.O.S
The tablet is still on, no way to turn it off.
Click to expand...
Click to collapse
i would recommend flashing the official rom again through Odin but DON'T flash the update.
There must be something in these updates that's broken because i've read quite a few posts like yours.
if anything after you get your tab working again , try to stick with philz advanced recovery, and reasearch
a CUSTOM rom instead of a Samsung update.
hope this helps :good:

moonbutt74 said:
i would recommend flashing the official rom again through Odin but DON'T flash the update.
There must be something in these updates that's broken because i've read quite a few posts like yours.
if anything after you get your tab working again , try to stick with philz advanced recovery, and reasearch
a CUSTOM rom instead of a Samsung update.
hope this helps :good:
Click to expand...
Click to collapse
thank you for your answer.mais I just flashed the tablet with an official ROM. no update. in fact, the tablet is extinguished but does not boot.
I want to know how to put the custom recovery again to be able to reflash. flash it via download only does'nt work . thank you again.

hey
imadoid said:
thank you for your answer.mais I just flashed the tablet with an official ROM. no update. in fact, the tablet is extinguished but does not boot.
I want to know how to put the custom recovery again to be able to reflash. flash it via download only does'nt work . thank you again.
Click to expand...
Click to collapse
okay so, at this point you will need to be as specific as possible in describing the problem and providing the specific
model type/number of your tab.
if i understand you, you are saying you CAN boot into Odin/Download mode BUT when you flash your custom recovery
it fails?

moonbutt74 said:
okay so, at this point you will need to be as specific as possible in describing the problem and providing the specific
model type/number of your tab.
if i understand you, you are saying you CAN boot into Odin/Download mode BUT when you flash your custom recovery
it fails?
Click to expand...
Click to collapse
exactly what happened. i can't put the costom recovery again.
SM-T210
ANDROID 4.1.2
T210XXAMKE
THANK YOU.

hey
imadoid said:
exactly what happened. i can't put the costom recovery again.
SM-T210
ANDROID 4.1.2
T210XXAMKE
THANK YOU.
Click to expand...
Click to collapse
okay so,
get this http://www.androidfilehost.com/?fid=23329332407587567
start odin, put tab in download mode [hold home,power,volume down] when warning screen appears
press appropriate button to enter download mode, connect tab, wait for it to register in odin,
select pda button in odin and navigate to the file above which you just downloaded
be sure that repartition option is NOT CHECKED, and click start.
if odin says md5 sum is invalid when you select the file, rename/remove the .md5 extension then reselect.
hope this helps.

[Q] Help need after failed to root my note 10.1 sm-p605 2014

I tried to root my Note 10.2 SM-P605 by using the CF-Auto-Root-lt03lte-lt03ltexx-smp605.zip.
After I connected my tablet and ran the odin. The Odin showed the process pass.
My tablet gets into screen cycle and keep showing:
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
Now I only can go to the download mode. I cannot even go to reboot mode.
What can I do now? PLEASE!!! I really need help for this. I only bought the tablet for a week.
Please, help me.

homan3homan2003 said:
I tried to root my Note 10.2 SM-P605 by using the CF-Auto-Root-lt03lte-lt03ltexx-smp605.zip.
After I connected my tablet and ran the odin. The Odin showed the process pass.
My tablet gets into screen cycle and keep showing:
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
Now I only can go to the download mode. I cannot even go to reboot mode.
What can I do now? PLEASE!!! I really need help for this. I only bought the tablet for a week.
Please, help me.
Click to expand...
Click to collapse
You could have rooted it with 'Towelroot' if you do not have newer kitkat version in your tab.
If you can get into 'Recovery mode', then do a factory reset/wipe cache/wipe dalvik.
If you cannot into recovery mode then reinstall stock samsung firmware for your region.
Download firmware here:
http://www.sammobile.com/firmwares/
http://samsung-updates.com/device/?id=SM-P605

Hi, i have had the same trouble.
You have to try to put back the device in download mode (you may have to try few times before you succeed).
Once you are in download mode follow these steps:
1. Re-install original 4.4 stock firmware with odin.
2. Reboot the device and wait until the reboot process finish and the device starts.
3. Put back the device in download mode.
4. Use again Odin to install cf-autoroot file (ATTENTION: in your P605 device with kitkat you need to use the autoroot file made for the P905 device or it will brick again).
5. Make a factory reset.
6. Enjoy your rooted device.
I hope it's clear enough.
Joe

Thank you
joe666it said:
Hi, i have had the same trouble.
You have to try to put back the device in download mode (you may have to try few times before you succeed).
Once you are in download mode follow these steps:
1. Re-install original 4.4 stock firmware with odin.
2. Reboot the device and wait until the reboot process finish and the device starts.
3. Put back the device in download mode.
4. Use again Odin to install cf-autoroot file (ATTENTION: in your P605 device with kitkat you need to use the autoroot file made for the P905 device or it will brick again).
5. Make a factory reset.
6. Enjoy your rooted device.
I hope it's clear enough.
Joe
Click to expand...
Click to collapse
Thank you!! This just solved my problem! Save my new tablet!!!!

i got same problem
homan3homan2003 said:
Thank you!! This just solved my problem! Save my new tablet!!!!
Click to expand...
Click to collapse
can u please where can u download Re-install original 4.4 stock firmware with odin.how to go back to download mode can u pls tell how to do it i got same ploblem also

mihirangammm said:
can u please where can u download Re-install original 4.4 stock firmware with odin.how to go back to download mode can u pls tell how to do it i got same ploblem also
Click to expand...
Click to collapse
You can download the stock ROM's from HERE or also from HERE

Odin 3 auto re-boot - STUCK on reboot screen. Help!

I've been having some issues keeping my Tab Pro 8.4 rooted. It doesn't seem to want to stay rooted after rooting.
I installed CM13 on the device about a week ago and its been buggy as hell. I went to install CM13 updates and for that root had been lost again. When I try to reroot (using the guides provided) Odin3 works fine until the tablet tries to re-boot. At that point it gets stuck on the reboot screen and goes no further. I can't flash anything or get the device to get past that re-boot screen.
Any advice?

AustinTech said:
I've been having some issues keeping my Tab Pro 8.4 rooted. It doesn't seem to want to stay rooted after rooting.
I installed CM13 on the device about a week ago and its been buggy as hell. I went to install CM13 updates and for that root had been lost again. When I try to reroot (using the guides provided) Odin3 works fine until the tablet tries to re-boot. At that point it gets stuck on the reboot screen and goes no further. I can't flash anything or get the device to get past that re-boot screen.
Any advice?
Click to expand...
Click to collapse
if you are losing root by upgrading your rom, all you should have to do is flash supersu zip via custom recovery after your rom upgrade
try holding vol - and power till you see a glip in the screen at samsung splash and let go this should take you to your custom recovery.
if that doesn't work you will need
to fix your current issue, you will want to download your stock firmware, push via odin3 (let tab fully boot) then push your custom recovery via odin3.
if your custom recovery worked with vol - and power just start here
then flash your cm13 rom, gapps, then the supersu zip

@AustinTech
get it fixed?
also holding vol+ and power takes you to download mode for odin

toolhas4degrees said:
if you are losing root by upgrading your rom, all you should have to do is flash supersu zip via custom recovery after your rom upgrade
try holding vol - and power till you see a glip in the screen at samsung splash and let go this should take you to your custom recovery.
if that doesn't work you will need
to fix your current issue, you will want to download your stock firmware, push via odin3 (let tab fully boot) then push your custom recovery via odin3.
if your custom recovery worked with vol - and power just start here
then flash your cm13 rom, gapps, then the supersu zip
Click to expand...
Click to collapse
How do I push the stock firmware via odin3? I can get into download mode and then run odin3 but I'm not sure how to push firmware through the program. I'd also need to find the stock firmware.
Sorry if these are basic questions, but I'm not all that familiar with rooting. This is only my second device. And thanks for your help!

AustinTech said:
How do I push the stock firmware via odin3? I can get into download mode and then run odin3 but I'm not sure how to push firmware through the program. I'd also need to find the stock firmware.
Sorry if these are basic questions, but I'm not all that familiar with rooting. This is only my second device. And thanks for your help!
Click to expand...
Click to collapse
go to www.sammobile.com and go to firmware. then type in sm-T*** in the search bar(I believe your device is sm-t320). search then download your firmware based on your country. cellular south is US
open the zip with 7zip or winrar and extract the .tar.md5 file
after you download this go to download mode on your tab
then plug in via usb to pc make sure the com light turns green in odin
then run odin 3
click AP button
select the .tar.md5 file
wait for it to load
then press start and wait for about 20 min until your tablet reboots to the origonal setup
everything will be stock like when you bought it @ this point you will have to redo everything you did when you bought it to regain root and custom recovery

same issue
toolhas4degrees said:
after you download this go to download mode on your tab
then plug in via usb to pc make sure the com light turns green in odin
then run odin 3
click AP button
select the .tar.md5 file
wait for it to load
then press start and wait for about 20 min until your tablet reboots to the origonal setup
everything will be stock like when you bought it @ this point you will have to redo everything you did when you bought it to regain root and custom recovery
Click to expand...
Click to collapse
I'm having the same issue. I'm trying to return to stock, so I use odin, it says PASS but the tablet wont boot past the samsung logo.

protectnor said:
I'm having the same issue. I'm trying to return to stock, so I use odin, it says PASS but the tablet wont boot past the samsung logo.
Click to expand...
Click to collapse
do you have the right firmware for your region?ex the stock region your tab is from and last firmware ver your tab was on. and is auto reboot selected?

toolhas4degrees said:
do you have the right firmware for your region?ex the stock region your tab is from and last firmware ver your tab was on. and is auto reboot selected?
Click to expand...
Click to collapse
Wow I feel like an idiot. It didn't give me an option at first, it sent me to the Trinidad and Tobago link.

toolhas4degrees said:
do you have the right firmware for your region?ex the stock region your tab is from and last firmware ver your tab was on. and is auto reboot selected?
Click to expand...
Click to collapse
I downloaded and flashed the correct firmware, but it still is stuck at the boot screen.

protectnor said:
I downloaded and flashed the correct firmware, but it still is stuck at the boot screen.
Click to expand...
Click to collapse
try going to stock recovery by vol- or + and power and try wiping data and cache

toolhas4degrees said:
try going to stock recovery by vol- or + and power and try wiping data and cache
Click to expand...
Click to collapse
Yes that helped. Thanks!

toolhas4degrees said:
go to www.sammobile.com and go to firmware. then type in sm-T*** in the search bar(I believe your device is sm-t320). search then download your firmware based on your country. cellular south is US
open the zip with 7zip or winrar and extract the .tar.md5 file
after you download this go to download mode on your tab
then plug in via usb to pc make sure the com light turns green in odin
then run odin 3
click AP button
select the .tar.md5 file
wait for it to load
then press start and wait for about 20 min until your tablet reboots to the origonal setup
everything will be stock like when you bought it @ this point you will have to redo everything you did when you bought it to regain root and custom recovery
Click to expand...
Click to collapse
I've downloaded the firmware but what the hell is a .tar.md5 file? I don't see anything like that in my extracted files.
I also don't have a PA button on my odin3

protectnor said:
Wow I feel like an idiot. It didn't give me an option at first, it sent me to the Trinidad and Tobago link.
Click to expand...
Click to collapse
Where did you get you firmware? I tried sammobile.com but the download was took 12 hours and both times gave me corrupt files.
I went to a different site and downloaded what I thought was the correct firmware but since there is no .tar.md5 file in the extracted files I'm thinking no...

Alright, sammobile is downloading a bit faster now so maybe in 2 hours I'll have the correct firmware. I think the site I used earlier was crap.
I educated myself on what a .tar.md5 file is as well and I think I'll be set once I have the firmware.

AustinTech said:
Alright, sammobile is downloading a bit faster now so maybe in 2 hours I'll have the correct firmware. I think the site I used earlier was crap.
I educated myself on what a .tar.md5 file is as well and I think I'll be set once I have the firmware.
Click to expand...
Click to collapse
Yeah sammobile was pretty slow for me too. Just make sure you have your tab!et in download mode before you connect it to the computer.

if you still have problems with sammobile you can download the firmware from the samsung servers with the tool SamFirm
http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
also in regards to your first post, CM13 has built in root, you don't need to manually root it, if you are then that's why it's breaking to enable root in cm13 go to settings -> developer options - > root access (then select apps, adb) this setting will persist over all future flashes, to enable developer options go to Settings -> about tablet and tap the build number 5 or 6 times to enable the option.

toolhas4degrees said:
@AustinTech
get it fixed?
also holding vol+ and power takes you to download mode for odin
Click to expand...
Click to collapse
I got it fixed.
Thanks for your help. PM me your PPal address - I want to buy you a beer. Or a pizza. You might be 13 yrs old for all I know.

AustinTech said:
I got it fixed.
Thanks for your help. PM me your PPal address - I want to buy you a beer. Or a pizza. You might be 13 yrs old for all I know.
Click to expand...
Click to collapse
I'm 32 lol, no money needed, just hit the thanks button. glad all is well.

galaxy note 4 SM-N910P won't flash any ROm file

HI Please i have this ERROR ON mY N910p it wont flash any custom or stock firmware i don't know what to do . my Note 4 can't boot in to recovery mode. it boots at times and goes off after but in the download mode it boots well and it show the error in the images on Odin and on my phones screen ..i have tried soo many tricks but yet it didn't work .i'm confuse please some one should help me get back my N910p to Life please

If you're trying to flash a ROM from the stock recovery, that could be one of your issues. You would need to have a custom recovery like TWRP in order to flash from recovery.
As for using ODIN to flash a stock ROM, make sure you have the correct drivers installed to your computer before attempting to flash anything. Make sure you are choosing the correct slot in ODIN to load your .tar file as well. I've never seen eMMC errors in download mode before but that doesn't look good. I'm not that knowledgeable about Android phones yet to be able to troubleshoot very many issues.

johnwiz said:
HI Please i have this ERROR ON mY N910p it wont flash any custom or stock firmware i don't know what to do . my Note 4 can't boot in to recovery mode. it boots at times and goes off after but in the download mode it boots well and it show the error in the images on Odin and on my phones screen ..i have tried soo many tricks but yet it didn't work .i'm confuse please some one should help me get back my N910p to Life please
Click to expand...
Click to collapse
Flash this QI5 firmware it will flash without errors because as i can see "fuse 5 binary 4" means you are on QI5 BL/BB so you cannot flash older firmware because its locked bootloader/baseband.
Must do factory reset from stock recovery after finish flashing.
https://androidfilehost.com/?fid=674106145207497529

Trex888 said:
Flash this QI5 firmware it will flash without errors because as i can see "fuse 5 binary 4" means you are on QI5 BL/BB so you cannot flash older firmware because its locked bootloader/baseband.
Must do factory reset from stock recovery after finish flashing.
https://androidfilehost.com/?fid=674106145207497529
Click to expand...
Click to collapse
First of all thanks for your reply.. I just flashed the QI5 firmware but the phone is rebooting in to recovery Mode without sucess .. it is just going to recovery and after some fewer second it goes off and on again .. i have tried to install the QE1 but it cant flash it gives me the error on the image below..please assist me solve this problem...Thanks in advance
i taught it was a mother board problem but now that it has flashed the Qi5 firmware i have a Hope ..Help me please

Psilocelium said:
If you're trying to flash a ROM from the stock recovery, that could be one of your issues. You would need to have a custom recovery like TWRP in order to flash from recovery.
As for using ODIN to flash a stock ROM, make sure you have the correct drivers installed to your computer before attempting to flash anything. Make sure you are choosing the correct slot in ODIN to load your .tar file as well. I've never seen eMMC errors in download mode before but that doesn't look good. I'm not that knowledgeable about Android phones yet to be able to troubleshoot very many issues.
Click to expand...
Click to collapse
thanks for your reply .. yes it is the correct firmware ..i saw in one post that it is due to the fact that i have updated to a firme with E-fuse protection ..i just flashed the Qi5 firmware but it bootloops .. it can't start corectly ...its just rebooting and the phone goes off after some secondes ..im confuse but i have Hope ..help me thanks

Did you flash the QI5 firmware and then do a factory reset right away from stock recovery like Trex888 said to do?
So it bootloops and then powers off completely by itself after a few seconds?

johnwiz said:
First of all thanks for your reply.. I just flashed the QI5 firmware but the phone is rebooting in to recovery Mode without sucess .. it is just going to recovery and after some fewer second it goes off and on again .. i have tried to install the QE1 but it cant flash it gives me the error on the image below..please assist me solve this problem...Thanks in advance
i taught it was a mother board problem but now that it has flashed the Qi5 firmware i have a Hope ..Help me please
Click to expand...
Click to collapse
Do a wipe data factory reset & wipe cache then reboot system.
If that doesn't work then follow this steps and be patient.
1,downloaf twrp recovery for n910p
2 open odin options and uncheck autoreboot (MUST USE ODIN 3.10 OR HIGHER)
3 choose AP TAB and choose twrp
4,connect device to pc in download mode
5,hit start
6,once twrp flashed remove battery and insert again
7,boot into twrp by 3 button combo
8,go to wipe/advance wipe/choose (dalvic cache+data+system+cache+internal storage) you have to wipe 7 times .
9,now go to odin again and choose AP and choose QI5 firmware.
10,go to odin options and check on "nand eraseall" & "re partition"
11,connect device in download mode & hit start.
Once flashed go to stock recovery and do factory reset.
12,Reboot and wait 10 to 15 min.
Done
TWRP LINK
https://dl.twrp.me/trltespr/twrp-3.0.2-0-trltespr.img.tar

Trex888 said:
Do a wipe data factory reset & wipe cache then reboot system.
If that doesn't work then follow this steps and be patient.
1,downloaf twrp recovery for n910p
2 open odin options and uncheck autoreboot (MUST USE ODIN 3.10 OR HIGHER)
3 choose AP TAB and choose twrp
4,connect device to pc in download mode
5,hit start
6,once twrp flashed remove battery and insert again
7,boot into twrp by 3 button combo
8,go to wipe/advance wipe/choose (dalvic cache+data+system+cache+internal storage) you have to wipe 7 times .
9,now go to odin again and choose AP and choose QI5 firmware.
10,go to odin options and check on "nand eraseall" & "re partition"
11,connect device in download mode & hit start.
Once flashed go to stock recovery and do factory reset.
12,Reboot and wait 10 to 15 min.
Done
TWRP LINK
https://dl.twrp.me/trltespr/twrp-3.0.2-0-trltespr.img.tar
Click to expand...
Click to collapse
THanks ... i will do that right Now and will tell you the result

for anyone not new to rooting , unbricking, stock flashing , twrp , etc ive had this very same problem after nights of screaming and confusion cause i KNOW im doing everything correct .. exact problems as lots have had here .. i replaced my cord with a cheap gas station android cord and borrowed a friends battery that was only a few days old .. and everything worked as it should .. moral of this story .. i assumed my hardware was fine cause independently both worked fine .. but for whatever reason it just wasnt good enough to flash stock FW problem solved .. it only took me a month to come to this amazing discovery (-_-) hope this helps someone ...... SM-N910P