Develop Bugs

Problem upgrading HBOOT

Hello mates, actually I´m on HBOOT 0.95 and i follow this tut https://www.dropbox.com/s/1avesz4l8fcnkku/Tutorial_hboot_upgrade.pdf
Also I download this RUU: RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Ra dio_5.1204.162.29_release_302015_signed.exe
My problem is after follow all steps I´m still on 0.95. Also the first time that I boot after follow the tut I boot normally but after the first settings of the ROM the only thing that I can see is the status bar so I reboot and now I´m stuck on boot logo. I don´t know what I should do now, I´m totally confused and need some help here. Thanks i nadvance.
EDIT: I forget to say that after the extract of the rom.zip from the exe that I download previously and flash it through RUU mode i get this error again and agin in CMD:
D:\HTC ONE X\fastboot>fastboot
sending 'zip' (653751 KB)...
OKAY [ 84.638s]
writing 'zip'...
(bootloader) signature checkin
FAILED (remote: 12 signature v
finished. total time: 124.480s

Perform a fastboot command for me please ?
Fastboot getvar version-main
Please post back the number

Thanks for the fast answer, if I don´t be wrong my vresion is: 1.29.401.11, anyway I do the fastboot command in few minutes.
EDIT: Yes I give you the correct number also my CID is HTC__304 and I´m looking a how to from ARHD thread
http://forum.xda-developers.com/showthread.php?t=1957376
http://www.youtube.com/watch?v=AQasxRPopSM
This is the how to that I´m looking right now.

The problem with that ruu is that is has to jump from a very low hboot to a high hboot. It doesnt work somehow
Download this one
http://bugsylawson.com/index.php/fi...12-radio-2120413520-release-274900-signedexe/
Then put the phone in the bootloader and relock the bootloader
Fastboot oem lock
After this you keep the phone in the bootloader and execute the ruu from the pc with admin rights
Right click the ruu and select - run as administrator.
After all this you boot the phone and update via the settings - software update menu to Jellybean stock.
Then unlock the bootloader again and flash a custom recovery , make a nandroid backup and flash a new JB rom of your choice

Mr Hofs said:
The problem with that ruu is that is has to jump from a very low hboot to a high hboot. It doesnt work somehow
Download this one
http://bugsylawson.com/index.php/fi...12-radio-2120413520-release-274900-signedexe/
Then put the phone in the bootloader and relock the bootloader
Fastboot oem lock
After this you keep the phone in the bootloader and execute the ruu from the pc with admin rights
Right click the ruu and select - run as administrator
Click to expand...
Click to collapse
Downloading....
Then when I finish the download I go to fastboot mode on the phone and only I must execute the RUU as an admin and follow the steps? Seems so easy. REally thanks again.

Don't forget to relock the bootloader first

Mr Hofs said:
Don't forget to relock the bootloader first
Click to expand...
Click to collapse
Yes, yes I don´t forget relock the bootloader, thanks again. I do it now and post the result.
Doing it right now, all seems to be ok for the moment....

Updated ?

All the process is done without problems and now I´m on HBOOT 1.12.0000
Now my question is: I see that for JB ROMs I need even a higher HBOOT version. I want to know what is the best option to update it. Can you help me again? Thanks anyway you are amazing.

After the ruu you go into the phone settings - about - software updates and check manually for updates !
Do all the ota's you can get !!!

OK, I am right now in the second update 367.14MB, Thanks.

Good that's the JB update

After this simply steps and without any problem I´m on HBOOT 1.39 ready for unlock BL again and flash a good JB ROM. Trally thanks again man, your help here was awesome,

Good ! Thanks mate :thumbup:
You will manage now
I say .....
CASE CLOSED !

Help to turn my DHD S-ON

Good morning
I have one HTC DEsire HD rooted, and with Jelly Time R_28 (Android 4.1.2).
Due a problem with GPS i try install the original ROM to send the phone to HTC, but in the middle of the precess give me a error, but the phone work well, but after that i can't install another rom and can't even update that rom, that because se security has ON, in other words now in bootloader i have the following text:
ACE PVT SHIP S-ON RL
HBOOT- 2.00.0027
MICROP-0438
RADIO- 26.14.04.28_M
eMMD-boot
Sep 7 2011,19:06:24
Some could help me, I already try every tutorial in the forum, I read a lot of pages and I try everything but i still can's install other rom's and the S-ON remanis.
Thank's!

If your bootloader is unlocked then after flashing the rom, you have to flash the boot.img from the rom using fastboot
Thanks doesn't hurt....

ramdesai said:
If your bootloader is unlocked then after flashing the rom, you have to flash the boot.img from the rom using fastboot
Thanks doesn't hurt....
Click to expand...
Click to collapse
Thank's for the fast reply, I try flash the boot.img from the rom via fastboot, but i have a error when i trie do it in cmd. I have the following error mensage:
signature checking
failed <remote: signature verify fail>
finished. total time 1.203s
I use the boot.img in the .rar of the rom, and I follow that guide (http://forum.xda-developers.com/showthread.php?t=1752270).
One more time, thank you for your help.

are you sure your bootloader is unlocked??

gustavojsp said:
Thank's for the fast reply, I try flash the boot.img from the rom via fastboot, but i have a error when i trie do it in cmd. I have the following error mensage:
signature checking
failed <remote: signature verify fail>
finished. total time 1.203s
I use the boot.img in the .rar of the rom, and I follow that guide (http://forum.xda-developers.com/showthread.php?t=1752270).
One more time, thank you for your help.
Click to expand...
Click to collapse
pascuals said:
are you sure your bootloader is unlocked??
Click to expand...
Click to collapse
It Is impossible To have an unlocked bootloader with that hboot version...if You don't find the exact Ruu for your device, You will Need To create a goldcard

glevitan said:
It Is impossible To have an unlocked bootloader with that hboot version...if You don't find the exact Ruu for your device, You will Need To create a goldcard
Click to expand...
Click to collapse
Thanks for the tip. I already create a goldcard, now what do I do?

gustavojsp said:
Thanks for the tip. I already create a goldcard, now what do I do?
Click to expand...
Click to collapse
Flash a RUU that is compatible with the hboot update, but you need what build version you are currently running...

Returning to Stock from JB Maximus

Hi, I'm heading back to stock JB Sense from the original JB Maximus rom (which worked very well). I relocked in fastboot and went to flash original RUU (3.14.401.31) and I got the error message to use the correct RUU. My cid is HTC__001, it's from Clove UK. Do I need to change the HBOOT? It's from the first Maximus JB rom. It's just booting to the bootloader now. Thanks for any help!

Do this:
fastboot getvar version-main
and post the result here...

vin4yak said:
Do this:
fastboot getvar version-main
and post the result here...
Click to expand...
Click to collapse
3.09.401.100
Thanks very much!

Firs you need to update your firmware to 3.14.401.31 with Hboot 1.39..
Download (firmware): http://www.androidrevolution.nl/downloader/download.php?file=3.14.401.31.zip
And then run this RUU:
http://bugsylawson.com/files/file/1...-r-radio-5120416229-release-302015-signedexe/

Hi, thanks very much, that was the RUU I used but I'll try with that firmware and report back. Cheers for the prompt help!!

Hi, I've downloaded the firmware a few times but when I try to flash it I'm getting "cannot determine image filename for 'firmware.zip'
I moved the firmware download to my fastboot folder and renamed it firmware.zip. Then I did "fastboot flash firmware.zip" < EDIT YEP THAT was the problem
Thanks again!

Honestly at this point I'd just even go back to Maximus 4.1 at this point, but those threads all disappeared.
EDIT: I got the firmware updated, now going for the RUU

Got the RUU installed, thanks very much vin4yak. Now the screen is flashing (flickering) on the sides once it booted, do you have any idea what I can do about that? I'm happy to install a different Sense rom if that helps.

Hey there,
similar problem: I have 3.09.401.100 as well, flashed the firmware successfully, relocked, tried to run the appropirate RUU but got a signature error (132) while it tries to send the it to the phone. I have the appropriate CID HTC___102 for the RUU etc. My HBOOT is 1.23.0000 - could that be a problem with the RUU? Any insights?
Thanks in advance
Froschfinger

Froschfinger said:
Hey there,
similar problem: I have 3.09.401.100 as well, flashed the firmware successfully, relocked, tried to run the appropirate RUU but got a signature error (132) while it tries to send the it to the phone. I have the appropriate CID HTC___102 for the RUU etc. My HBOOT is 1.23.0000 - could that be a problem with the RUU? Any insights?
Click to expand...
Click to collapse
That's what I got the first time I tried to run the RUU, before flashing the new firmware. You may need firmware with a higher HBOOT to use this JB RUU. Once I flashed the firmware above, the RUU in this thread worked fine. I'm having some flashing now but heck, I had that when my phone was stock when I first got it, heh. I remember that issue now!

otarinz said:
Got the RUU installed, thanks very much vin4yak. Now the screen is flashing (flickering) on the sides once it booted, do you have any idea what I can do about that? I'm happy to install a different Sense rom if that helps.
Click to expand...
Click to collapse
Glad you sorted it out mate!
if you had just gone to stock to update... Then I will recommend you to use a custom sense rom if your attached to sense that much!
Use ViperX... It needs Hboot 1.31 at least..
Steps for flashing are the same as any other rom...
1. Wipe Data..Wipe Cache...Wipe Dalvic Cache... Or use Super Wipe Script(Recommended) : https://www.dropbox.com/s/0y31poo1kiaif4y/Super wipe script.zip
2. Flash rom. Flash Patch. (Check ViperX Thread)
3. Reboot.
Froschfinger said:
Hey there,
similar problem: I have 3.09.401.100 as well, flashed the firmware successfully, relocked, tried to run the appropirate RUU but got a signature error (132) while it tries to send the it to the phone. I have the appropriate CID HTC___102 for the RUU etc. My HBOOT is 1.23.0000 - could that be a problem with the RUU? Any insights?
Thanks in advance
Froschfinger
Click to expand...
Click to collapse
You first have to update your firmware... Download this : http://goo.gl/M0hLq
and then run the ruu...

Hey there,
it sounds as if the HBOOT is in fact my problem. Quick question: How exactly did you flash the firmware, especially the HBOOT? I flashed the boot.img and recovery.img via command since I have no SD card access, but this doesn't seem to have changed the HBOOT.
Thanks again
Froschfinger

Relock the bootloader:
"fastboot oem lock"
Reboot RUU:
"fastboot oem rebootRUU"
Flash the firmware:
fastboot flash zip firmware.zip
You might get an error the first time you do it... try again until you get a successful message.
After successful flashing...
Go to fastboot again,,,
Now if you want to install a custom rom, you need to flash custom recovery by unlocking the bootloader... or if you want to go full stock then run the RUU...

Hey vin4yak,
that was the missing piece in the puzzle. Flashing the whole .zip file. Finally I got it working - thank you so much!!!!
All the best
Froscher

[Q] Htc One X Jelly Bean Uptade Problem

Hi.. My decice cid number: 11111111
Boot: 1.12....
How to i can jelly bean uptade..?
Now Ice Cream is rom..

Your cid indicates that your device is s-off, can you verify that.
Of so you can install any JB ruu or firmware so you can install a JB rom after.

Error (159) involded

You have to give more info mate, its not a game of sharades here

RUU file is loading image error warning. Error code 159
My device cid no 11111111
S-off
Hboot :1.12.....

Is your bootloader locked ?

Yes..

need to unlock the bootloader?

No....what ruu did you run, and how did you run it ?

Ruu_endeavor_u_jb_45_s_htc_europe_3.14.401.31_r_radio_5.1204.162.29_release_302015_signed.exe
Is that RUU file is name..

Put the phone in the bootloader so fastboot usb is enabled
Then right click the ruu and select run as administrator

Yes, I'm that way..

Should work ! Does fastboot commands work fine ?

Yes fastboot is working fine..

You could try to flash the 401 JB firmware, flash a custom recovery and then install a new JB rom
Here are the firmwares
http://forum.xda-developers.com/showthread.php?t=1957376

Dont flashing hboot
Error is : FAILED <remote: not allowed>

How did you flash the firmware.
Fastboot oem rebootRUU
Fastboot flash zip firmware.zip

Mr Hofs said:
How did you flash the firmware.
Fastboot oem rebootRUU
Fastboot flash zip firmware.zip
Click to expand...
Click to collapse
aaa..It was now. I'm doing it wrong. Thank you very much..

No problem
CASE CLOSED !

Help me with my first Ruu

Hello guys. I was having problems getting the update. Then I found out , you can Ruu with S-ON but needs Bootloader Re Locked. Anyway, as it's my first time I wanna ask few question so I don't end up with a dead phone.
So, what I understood is Ruu will update all the other partition except System/ROM. On S-ON it needs Re Locked bootloader, the Ruu needs to be higher version than the Hboot OS version, the Ruu needs to be fully stock and it'll wipe the Internal Storage.
So, I first use "fastboot oem lock" then " fastboot rebootRuu" "fastboot flash zip xxx.zip" then it'll stuck on 75%-90% and I'll have to use "fastboot reboot-bootloader".
And I'll get the Android M Bootloader, recovery and other stuffs, right?
Now I'll be at Bootloader, have to use that Token_Unlocker.bin to Unlock again, flash twrp and flash a Marshmallow ROM and It'll be fully Android M.
This is what I understood. Please tell me if I'm right or not. Correct me if I'm wrong. I can't S-OFF , so this is only way. I also don't want a hard brick. So, please help.
I have some questions though. I've currently Viperone 5.0 ROM on Lollipop base. Do I have to go back to stock ROM before I can use Ruu? Do I have to get Stock recovery before I can start Ruu? Will Ruu erase the ROM? If Ruu erase everything, will my memory card be safe or should I remove it before Ruu and insert it to flash ROM after Ruu is done?
Thanks in advance for replying.

You have the proper RUU for your CID?
My responses below in red font:
Saikat.mondol1 said:
So, what I understood is Ruu will update all the other partition except System/ROM. RUU will wipe the System (ROM) partition as well. Not sure why you would think otherwise.
So, I first use "fastboot oem lock" then " fastboot rebootRuu" "fastboot flash zip xxx.zip" then it'll stuck on 75%-90% and I'll have to use "fastboot reboot-bootloader". It might get stuck, but doesn't always. Of course, its good to know what to do, in case it does get stuck.
And I'll get the Android M Bootloader, recovery and other stuffs, right? The phone will be formatted to MM stock condition, all partitions.
Now I'll be at Bootloader, have to use that Token_Unlocker.bin to Unlock again, flash twrp and flash a Marshmallow ROM and It'll be fully Android M. You will already be on the stock MM ROM after RUU (as I've somewhat mentioned above). If you want to unlock the bootloader, TWRP, and install a MM custom ROM, you can do that.
Alternately, if you want to root the stock MM ROM, unlock bootloader, TWRP, and flash SuperSU 2.64 or later.
I have some questions though. I've currently Viperone 5.0 ROM on Lollipop base. Do I have to go back to stock ROM before I can use Ruu? NO
Do I have to get Stock recovery before I can start Ruu? NO
Will Ruu erase the ROM? YES
If Ruu erase everything, will my memory card be safe or should I remove it before Ruu and insert it to flash ROM after Ruu is done? Removable SD should be safe. But remove it before RUU, just to be safe.
Click to expand...
Click to collapse

redpoint73 said:
You have the proper RUU for your CID?
My responses below in red font:
Click to expand...
Click to collapse
Thanks a lot man. I've tried but it said "Error 12: Signature failed" Need a signed Ruu

Saikat.mondol1 said:
Thanks a lot man. I've tried but it said "Error 12: Signature failed" Need a signed Ruu
Click to expand...
Click to collapse
What is your device's CID, and what RUU are you trying to run?

redpoint73 said:
What is your device's CID, and what RUU are you trying to run?
Click to expand...
Click to collapse
htc_002 . And look at this thread http://forum.xda-developers.com/htc...ess-fuu-m8-t2813792/post64916167#post64916167

redpoint73 said:
What is your device's CID, and what RUU are you trying to run?
Click to expand...
Click to collapse
"Error 12: Signature failed" -- He needs htc_fastboot.exe not google fastboot.exe
http://forum.xda-developers.com/showpost.php?p=64893560&postcount=17