I have the Z00AD ZE551ML Zenfone 2. I just rooted it, and tried 2 different roms (Cyanogen, and SuperZen (which I currently have on)), on neither rom did the PC Link work correctly. It will register that it's connected to the computer, I can open the pc link on both my phone and computer, and connect. I even get notifications on my computer when I get them on my phone while it's connected. But the window will not pop up mirroring my phone on my pc, no matter what I try. Any suggestions?
Did you get any solution. I am facing same problem while connecting other (non ASUS) device via pc liNk.
same problem here, I'm using stock marshmallow though so I don't know what the problem is
---------- Post added at 02:22 AM ---------- Previous post was at 02:19 AM ----------
I also noticed that PC Link is no longer available on the playstore, is it unsupported by asus on later ZenUI versions (ZenUI 3 and 4?)
Related
Kind of at my wits end here. Phone is rooted and running Slim ROM. Wanted to put it back to stock. All current recommended procedures use ODIN. I have installed the USB drivers independently and through latest version of KIES but phone is not recognized when I plug it in and no USB registration tones are heard.
If I plug into USB with device off, it registers. If I plug in with device on, it registers. If I plug in in ODIN mode - nothing!
Any idea what might be causing this? Alternatively, how to put back to stock without ODIN? Thanks in advance
kosherham51 said:
Kind of at my wits end here. Phone is rooted and running Slim ROM. Wanted to put it back to stock. All current recommended procedures use ODIN. I have installed the USB drivers independently and through latest version of KIES but phone is not recognized when I plug it in and no USB registration tones are heard.
If I plug into USB with device off, it registers. If I plug in with device on, it registers. If I plug in in ODIN mode - nothing!
Any idea what might be causing this? Alternatively, how to put back to stock without ODIN? Thanks in advance
Click to expand...
Click to collapse
You have Kies AND drivers installed? You should only install the drivers without Kies if that is the case as the driver suite and Kies will conflict.
Have you tried another pc and/or usb cable?
---------- Post added at 02:04 PM ---------- Previous post was at 01:27 PM ----------
The other choice is to use mobile odin to flash the rom from external SD if you can mount external storage and copy over the file.
Or you can flash a regular flashable zip of the rom if you can get the phone to flash to the appropriate kernel first.
Believe I only have one set of drivers installed. Was just trying alternate drivers to get it working, Yes, tried other computers/cables to no avail. Was able to flash using Mobile ODIN but still puzzled why USB/ODIN not working. Didn't think the USB port could malfunction that selectively.
tdunham said:
You have Kies AND drivers installed? You should only install the drivers without Kies if that is the case as the driver suite and Kies will conflict.
Have you tried another pc and/or usb cable?
---------- Post added at 02:04 PM ---------- Previous post was at 01:27 PM ----------
The other choice is to use mobile odin to flash the rom from external SD if you can mount external storage and copy over the file.
Or you can flash a regular flashable zip of the rom if you can get the phone to flash to the appropriate kernel first.
Click to expand...
Click to collapse
I just got a S2X from a friend who recently upgraded to a Nexus 5. I already have a Nexus 7 (2013), but I want to play around with rooting and ROM's on this S2X. For me, it's a chance to play with a device that doesn't really mater a whole lot. But anyway, when I connect the phone to my PC, it will charge but do absolutely nothing else. Doesn't show up in Devices, not in Explorer, nothing. I tried installing Kies and the USB drivers for the S2, but nothing has worked. Any ideas?
Install kies and it will install the proper drivers. If you use Odin later to flash recovery and ROOT, make sure to end all processes of kies first. Or Odin will fail. ?
I did install Kies. The phone doesn't even show up as an unknown device under devices. I can connect over wifi
Try a different cable, different USB port or a different pc.
---------- Post added at 07:32 PM ---------- Previous post was at 07:30 PM ----------
You need to sort this out so you can use Odin. Otherwise you won't be able to do anything.
Try a different MicroUSB Cable, Different Usb port and or Check and download the right drivers for SG2.
SG2 Drivers can be found here; http://androidxda.com/download-samsung-usb-drivers
Download and install.
Re-start.
Try again.
If still not working, turn on usb debugging and then disconnect and re-connect to PC Make sure USB DEBUGGING IS ON..
Hi, I recently rooted and flashed cm11 to my DHD
It is S-OFF and rooted, 4ext recovery installed.
Problem is that now the phone is not recognised by my computer (or any computer, not a driver issue) I use linux and there is no output whatsoever from dmesg when phone is plugged/unplugged to usb.
Reading through other posts (but not relevant to DHD) it seems to be a prob with the misc partition (mtd0 on the desire, not sure on the DHD)
So I have no fastboot usb or adb over usb access, but can SSH into phone and use root shell on it, any suggestions?
Also, SD card not working - assume this is related to the USB problem since started happening at same time.
correction, sd works, so just usb needs sorting, tried reflashing /misc but no joy
jmprince80 said:
Hi, I recently rooted and flashed cm11 to my DHD
It is S-OFF and rooted, 4ext recovery installed.
Problem is that now the phone is not recognised by my computer (or any computer, not a driver issue) I use linux and there is no output whatsoever from dmesg when phone is plugged/unplugged to usb.
Reading through other posts (but not relevant to DHD) it seems to be a prob with the misc partition (mtd0 on the desire, not sure on the DHD)
So I have no fastboot usb or adb over usb access, but can SSH into phone and use root shell on it, any suggestions?
Also, SD card not working - assume this is related to the USB problem since started happening at same time.
Click to expand...
Click to collapse
No...when flashing to cm 11+ you need to update your SDK. Update the files(all the android versions). To access fastboot u have to open platform folder..then anywhere in that folder hold shift and right click..chose command here
---------- Post added at 03:20 AM ---------- Previous post was at 03:19 AM ----------
P.s.
Edit: its either platforms or platform tools folder. Sorry about that.
---------- Post added at 03:23 AM ---------- Previous post was at 03:20 AM ----------
http://www.addictivetips.com/mobile/what-is-adb-and-how-to-install-it-android/
it is not a problem with the computer, since the phone is not even shown on list of USB devices. even with no SDK or any other tools installed on a computer there should still be a USB vendor and product code when plugged in. the phone itself also does not recognise that it is plugged into anything but a power source. problem is phone side hence content of original post.
jmprince80 said:
it is not a problem with the computer, since the phone is not even shown on list of USB devices. even with no SDK or any other tools installed on a computer there should still be a USB vendor and product code when plugged in. the phone itself also does not recognise that it is plugged into anything but a power source. problem is phone side hence content of original post.
Click to expand...
Click to collapse
No! With the android versions 4.4 and up, you need to install the SDK updated files for that android versions. Believe me,I know
---------- Post added at 11:35 AM ---------- Previous post was at 11:34 AM ----------
If one cannot find the specific drivers for a device, they can use the SDK toolkit
Im happy to try installing the latest SDK.
However Im pretty sure that its not going to change anything.
Simple fact is that is a USB device is plugged in, whether or not there are drivers present, it will still show up with a LSUSB or as an unknown device in windows device manager.
I think the problem lies somewhere in one of the configuration partitions - I am able to flash different ROMS by adb pushing to /sdcard but none i have tried have yet solved the USB issue. If I flash back to stock I will lose recovery and be unable to fix problem at all.
Dude. Yes it will
in RUU are *ALL* partitions replaced back to stock? Don't fancy being stuck back on GB....
Its not a matter of "staying"on gingerbread. Its a matter of getting your device back on track. Running that ruu after locking your bootloader will sort things out. You can always unlock it again and flash a fresh custom ROM.
---------- Post added at 02:16 AM ---------- Previous post was at 02:13 AM ----------
If u are s off, then all that will be wiped pertaining to wiping is your bootloader. There u can use SDK to access your device. U don't exactly need the "USB" thing sorted. All u need is to have SDK updated with all android versions and getting access to your bootloader via platform tools in SDK. Ppl are sadly misguided by this USB situation.
Does anyone make this sw working on our LG G4(H815-international version)? Although I'm rooted, ADB debugging allowed...no luck. I tryied even mobizen's "booster mode". Did anyone managed to make it working? Great sw though-I use it with SG4.
I'm not rooted. I can get USB to connect (after I install the LG drivers) but it won't let me control the screen. Only lets me control screen on WIFI.
---------- Post added at 12:18 PM ---------- Previous post was at 12:04 PM ----------
Ok so i got it working.. Be sure to install the WIFI Install that Mobizen asks you to during setup if you didn't install it you can un/reinstall Mobizen and it will prompt you again, or you can download the LG Plugin v1.0 form the Play Store - search for Rsupport and look for LG Plugin v1.0. The thing that you probably are not doing is installing the actual LG drivers (at least that's what I was not doing). When you connect your phone and it has the notification to tap for more usb options. clikc that and a popup should come up asking you to Install PC drivers.... Click install and your phone will make the Windows disconnect sound and after a moment, and it will install a CD drive on your computer go to that CD drive and run the program called LG PC Programs. After that it should install drivers and you should be good to use Mobizen thru USB. Let me know if you have any problems.. i wrote this up on a quick break from work so it may not make sense.
somehow miraclously I managed to make it working w/o reboot. I had to close both apps(PC & Android), then I run Andr. app, "turned on booster"(although no notif. that booster mode is enabled appeared), then run PC app and at very end connected thru cable. And it worked (I tryied several times)
I enable ADB on developers options and was able to enter fast boot, the first time. But don't do anything.
But now the Watch is not recognized, I already try in 3 different PC's and received the message.
When I connect a box appear that indicate:
USB Device Not Recognized, the last USB device you connect to this computer malfunctioned and Windows does not recognized it.
Recommendation: Try Reconnecting the device. If Windows still does not recognize it, your device may not be working properly.
My Wife Watch are recognized in all 3 PC's and able to unlock bootloader, install TWRP and Kernel.
Also when I go to Device Manager a line (under Universal Serial Bus Controllers) are added tha indicate :
Unknown USB Device (Device Descriptor Request Failed)
I already reset the watch 3 times, wipe cache, but still same error message.
Under Developer Options, I revoke debugging authorizations.
What other options I had.
Thanks.
Getting this too, did you find a solution?
Hello ....
I have the same problem after the last update ..
I also got the same error. Hope somebody finds a fix
I have same problem :/
What do you think it has reason? HW or SW brick?
---------- Post added at 11:01 PM ---------- Previous post was at 10:59 PM ----------
but my watch still in android bootloop, recovery workinng but factory reset not helping.
I fixed it. For me the error occurred because I used a 3rd party charger. (Which came with my watch because I bought it second hand)
So I got the original huawei charger from Amazon and now everything is working fine.
ViktorFoedowski said:
I fixed it. For me the error occurred because I used a 3rd party charger. (Which came with my watch because I bought it second hand)
So I got the original huawei charger from Amazon and now everything is working fine.
Click to expand...
Click to collapse
Could you send me a link to the charger you bought please? Thanks!