Related
hey, I need your help:
I was on OmniROM and wanted to install B125, I installed B118 Recovery and got:
Checking Module Verlist...
Huawei SD card update fail
I tried several recoveries and firmwares, no luck.
then in one thread I saw that I have to flash boot.img and then recovery,img. done. and now my phone is stuck at splash screen.
I can enter recovery but it wont install anything.
Please quick help , it's 1:45 am here in germany and I need to get up at 6:30 and my P6 is my alarm!!!
DrRammel said:
hey, I need your help:
I was on OmniROM and wanted to install B125, I installed B118 Recovery and got:
Checking Module Verlist...
Huawei SD card update fail
I tried several recoveries and firmwares, no luck.
then in one thread I saw that I have to flash boot.img and then recovery,img. done. and now my phone is stuck at splash screen.
I can enter recovery but it wont install anything.
Please quick help , it's 1:45 am here in germany and I need to get up at 6:30 and my P6 is my alarm!!!
Click to expand...
Click to collapse
Hope you fixed it already.
If not, try this.
http://dl.dbank.com/xhtml/link/resource.jsp?id=c01l4l4a2y&opt=101&e_r_auth=1&pid=38#
Put the downgrader in dload. After it is done, install your b125.
Make sure you thank @iwtfmcl who discovered it here:
http://forum.xda-developers.com/showthread.php?p=52164529
Sent from my P6-U06
bokchoi2020 said:
Hope you fixed it already.
If not, try this.
http://dl.dbank.com/xhtml/link/resource.jsp?id=c01l4l4a2y&opt=101&e_r_auth=1&pid=38#
Put the downgrader in dload. After it is done, install your b125.
Make sure you thank @iwtfmcl who discovered it here:
http://forum.xda-developers.com/showthread.php?p=52164529
Sent from my P6-U06
Click to expand...
Click to collapse
Yes, I saw that yesterday and put it on SD, but when I select "Install update so sd card", i go to dload folder and it's empty (yes, I checked if the UpdATE.APP is in there)
I installed recovery for b118 first and the boot.img and recovery from b506
so, my phones turns on, I can see the Huawei splashscreen. I can enter recovery as well. and my PC recognizes the phone.
My recovery wont install anything though.
So, can I flash some sort of recovery in this situation? Because I think that flashing the boot.img removed my ROM.
DrRammel said:
Yes, I saw that yesterday and put it on SD, but when I select "Install update so sd card", i go to dload folder and it's empty (yes, I checked if the UpdATE.APP is in there)
I installed recovery for b118 first and the boot.img and recovery from b506
so, my phones turns on, I can see the Huawei splashscreen. I can enter recovery as well. and my PC recognizes the phone.
My recovery wont install anything though.
So, can I flash some sort of recovery in this situation? Because I think that flashing the boot.img removed my ROM.
Click to expand...
Click to collapse
To revert on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y# via local update, after that you can flash 4.2.2 without issues again via local update.
Another link for the download in case it is slow from the first one https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4
tileeq said:
To revert on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y# via local update, after that you can flash 4.2.2 without issues again via local update.
Another link for the download in case it is slow from the first one https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4
Click to expand...
Click to collapse
I cant install anything. can I flash something with PC when I'm in recovery? I think my device works but I have no ROM and I cant flash anything.
I need to make the P6 work, please help..
DrRammel said:
Yes, I saw that yesterday and put it on SD, but when I select "Install update so sd card", i go to dload folder and it's empty (yes, I checked if the UpdATE.APP is in there)
Click to expand...
Click to collapse
I don't think you can use stock recovery to pick update.app from folder. You have to use 3 button power up method.
Just place update.app in dload folder on external SD card.
From the links i shared before you can get a dload/update.app that you need to put on sd card and update through the stock recovery before you try updating actual stock rom(4.2.2)
tileeq said:
To revert on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y# via local update, after that you can flash 4.2.2 without issues again via local update.
Another link for the download in case it is slow from the first one https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4
Click to expand...
Click to collapse
The term local update refers to update that you do from working ROM, meaning you are able to go to System updates when ROM is running and choose Local update from SD card.
In this case it has to be done by what's called forced update, 3 button power up method.
I know what you all mean and i tried many times but it wont install anything now! First I got fail, I couldnt choose a updat.app even though it was on sd.
Now it doesnt even load the whole recovery...
And I dont have a rom, when I reboot I am stuck at splash screen.
And the 3 botton method didnt work, after that i selected from sd card but no luck..
is on its way to repair centre right now..
DrRammel said:
hey, I need your help:
I was on OmniROM and wanted to install B125, I installed B118 Recovery and got:
Checking Module Verlist...
Huawei SD card update fail
I tried several recoveries and firmwares, no luck.
then in one thread I saw that I have to flash boot.img and then recovery,img. done. and now my phone is stuck at splash screen.
I can enter recovery but it wont install anything.
Please quick help , it's 1:45 am here in germany and I need to get up at 6:30 and my P6 is my alarm!!!
Click to expand...
Click to collapse
Hello !
Sorry to tell you, but from start you did a wrong step ! First if you was on OmniROM, you must flash ONLY stock recovery for KitKat and not for JB ! From here start all issues in your device !
To avoid any issue , when you use a custom rom based KitKat and you want to downgrade to JB , first you must put your device to Stock Huawei KitKat ( doesn't matter if is beta, B506 or B507 ) ! To install Stock Huawei KitKat - you must to flash stock recovery KitKat - and than flash UPDATE.APP from /dload folder ( where UPDATE.APP is stock firmware Huawei KitKat ) !
Now you should follow the intermediate steps to be able to downgrade to JB ( by installing aditional update.app )
Anyway good luck, and I hope you can solve this issue !
Edit :
You can try this stuff :
First, use your PC with a new microSD to copy UPDATE.APP ( from Huawei KitKat ) in /dload folder !
Go here and take stock recovery for Huawei KitKat ;
Put your microSD already prepared on your device and connect USB cable! Put your device in bootloader mode ( just keep pressing power button and volume down more than 10sec ) - now you should be able to flash stock recovery in your device > fastboot flash recovery recovery.img ; and reboot your device > fastboot reboot ! Right now you can reboot in stock recovery ( adb reboot recovery or using combo key ) and start flash UPDATE.APP !
surdu_petru said:
Hello !
Sorry to tell you, but from start you did a wrong step ! First if you was on OmniROM, you must flash ONLY stock recovery for KitKat and not for JB ! From here start all issues in your device !
To avoid any issue , when you use a custom rom based KitKat and you want to downgrade to JB , first you must put your device to Stock Huawei KitKat ( doesn't matter if is beta, B506 or B507 ) ! To install Stock Huawei KitKat - you must to flash stock recovery KitKat - and than flash UPDATE.APP from /dload folder ( where UPDATE.APP is stock firmware Huawei KitKat ) !
Now you should follow the intermediate steps to be able to downgrade to JB ( by installing aditional update.app )
Anyway good luck, and I hope you can solve this issue !
Click to expand...
Click to collapse
Thanks man for helping me out but I'm dumb, if I WAITED; i wouldnt have this problem...
#
anyway, I already sent device to huawei a few hours ago, I hope I'll get a new device, I have warranty still..
Thanks to all, now everyone can see how to downgrade!
DrRammel said:
Thanks man for helping me out but I'm dumb, if I WAITED; i wouldnt have this problem...
#
anyway, I already sent device to huawei a few hours ago, I hope I'll get a new device, I have warranty still..
Thanks to all, now everyone can see how to downgrade!
Click to expand...
Click to collapse
Ok, good luck !
This is the reason why I always recommended to use JB Rom with JB Recovery and KitKat Rom with KitKat Recovery - to avoid any issues! :good:
Hi Guys,
had the same issue today, but thank god i was still able to boot on a bugged omni room to copy file back and forth on my sd card.
But i still cannot find any way back to 4.2...
I tried the steps which surdu_petru write down but i still have the same error message
Checking Module Verlist...
Huawei SD card update fail.
Maybe i made a mistake but these were the steps that i tried:
I`m on the Omni Rom 4.4.2 right now with trwp 2.7.0.0
1. i prepared a microsd with the dload folder of the stock b506 from the huawei site
2. i flashed the stock recovery (B506) from THAT post
3. rebooted the phone and pressed volume plus and minus
4. and then the error message appeard
Maybe someone can explain me step by step how the downgrade works, would like to see the b125 stock on my phone
Thank you!
Sorry for my bad english
n00del said:
Hi Guys,
had the same issue today, but thank god i was still able to boot on a bugged omni room to copy file back and forth on my sd card.
But i still cannot find any way back to 4.2...
I tried the steps which surdu_petru write down but i still have the same error message
Checking Module Verlist...
Huawei SD card update fail.
Maybe i made a mistake but these were the steps that i tried:
I`m on the Omni Rom 4.4.2 right now with trwp 2.7.0.0
1. i prepared a microsd with the dload folder of the stock b506 from the huawei site
2. i flashed the stock recovery (B506) from THAT post
3. rebooted the phone and pressed volume plus and minus
4. and then the error message appeard
Maybe someone can explain me step by step how the downgrade works, would like to see the b125 stock on my phone
Thank you!
Sorry for my bad english
Click to expand...
Click to collapse
You should perform an intermediate step by installing a small update.app before to be able to downgrade to JB ! Solution a few posts above (try to read them all to see what you missed).
u mean that dload from that chinese download site? i tried to flash this with the same method like the stock B506 but it also fails.
l
n00del said:
u mean that dload from that chinese download site? i tried to flash this with the same method like the stock B506 but it also fails.
l
Click to expand...
Click to collapse
Since you have working ROM, try to flash that small update.app with normal update process via System updates-Update from SD card, if 3 button method fails.
what i tried:
1. omnirom 4.4.2 with trwp 2.7.0.0 -> flash kitkat stock recovery -> flash Kitkat b506 -> failed
2. modified b506 custom rom with trwp 2.7.0.0 -> flash kitkat stock recovery -> flash that small update app from this chinese site -> failed
3. modified b506 custom rom with trwp 2.7.0.0 -> flash kitkat stock recovery -> flash stock b125 -> failed
4. omnirom 4.4.2 with trwp 2.7.0.0 -> flash b118 stock recovery -> reboot-> phone keeps vibrating and nothing works until i reflash trwp or kitkat stock
failed = Checking Module Verlist... Huawei SD card update fail
n00del said:
what i tried:
1. omnirom 4.4.2 with trwp 2.7.0.0 -> flash kitkat stock recovery -> flash Kitkat b506 -> failed
2. modified b506 custom rom with trwp 2.7.0.0 -> flash kitkat stock recovery -> flash that small update app from this chinese site -> failed
3. modified b506 custom rom with trwp 2.7.0.0 -> flash kitkat stock recovery -> flash stock b125 -> failed
4. omnirom 4.4.2 with trwp 2.7.0.0 -> flash b118 stock recovery -> reboot-> phone keeps vibrating and nothing works until i reflash trwp or kitkat stock
failed = Checking Module Verlist... Huawei SD card update fail
Click to expand...
Click to collapse
You should try to wipe cache , data and dalvik-cache ( on twrp ) , than flash stock recovery in this way :
Reboot -> Bootloader ;
fastboot flash recovery recovery.img
press combo key to boot on stock recovery ;
DrRammel said:
hey, I need your help:
I was on OmniROM and wanted to install B125, I installed B118 Recovery and got:
Checking Module Verlist...
Huawei SD card update fail
I tried several recoveries and firmwares, no luck.
then in one thread I saw that I have to flash boot.img and then recovery,img. done. and now my phone is stuck at splash screen.
I can enter recovery but it wont install anything.
Boot and recovery are 4.2.2? or have something old? How can I check?
Please quick help , it's 1:45 am here in germany and I need to get up at 6:30 and my P6 is my alarm!!!
Click to expand...
Click to collapse
I had the same.
I put it in dload that: http://dl.vmall.com/c01l4l4a2y# via local update, after that you can flash 4.2.2 without issues again via local update.
Another link for the download in case it is slow from the first one https://mega.co.nz/#!9oEHUTiR!uVKEq6...QZ5yrnedx4rug4
I managed to get back to 4.2.2
Now I installed 4.2.2 b610 vodafone dload method.
Boot and recovery are 4.2.2? or have something old? How can I check?
So i tried to wipe cache, data and dalvik cache on twrp 2.7.0.0 and rebooted into bootloader and flashed the stock KK recovery from the thread.
Then i booted my phone up into the stock recovery and it tried to flash the B506 dload with the same error.
I also tried to flash the small update.app without success
Hello, I tell you, after rooting the phone I installed the cwm recovery, after i install a ROM to restart it I was caught in the logo of Huawei, is there any solution?
Thank you.
mathius89 said:
Hello, I tell you, after rooting the phone I installed the cwm recovery, after i install a ROM to restart it I was caught in the logo of Huawei, is there any solution?
Thank you.
Click to expand...
Click to collapse
More info please. What ROM you were before and what ROM did you flashed upon that one. What cwm, touch cwm? From now on install TWRP, it's better, safer and more stable.
BeyondTheHorizon said:
More info please. What ROM you were before and what ROM did you flashed upon that one. What cwm, touch cwm? From now on install TWRP, it's better, safer and more stable.
Click to expand...
Click to collapse
Before JB had the factory, and installed the [ROM] Huawei KK_ P6_all in EN (BbN) _based on_repack SLMINSK, restarting the mobile I stay in the Huawei logo.
The recovery is this: http://forum.xda-developers.com/showthread.php?t=2417919.
Next time will install the TWRP but now you do not.
mathius89 said:
Before JB had the factory, and installed the [ROM] Huawei KK_ P6_all in EN (BbN) _based on_repack SLMINSK, restarting the mobile I stay in the Huawei logo.
The recovery is this: http://forum.xda-developers.com/showthread.php?t=2417919.
Next time will install the TWRP but now you do not.
Click to expand...
Click to collapse
It takes more than five minutes for the new ROM to boot. It taked longer ? And also you should follow tutorials in here about flashing ROM's and how/what recovery you should install at the right time during the upgrading process. Especially when you upgrade from JellyBean to KitKat.
BeyondTheHorizon said:
It takes more than five minutes for the new ROM to boot. It taked longer ? And also you should follow tutorials in here about flashing ROM's and how/what recovery you should install at the right time during the upgrading process. Especially when you upgrade from JellyBean to KitKat.
Click to expand...
Click to collapse
I left 30 minutes and never passed the Huawei logo ... No solution?
mathius89 said:
I left 30 minutes and never passed the Huawei logo ... No solution?
Click to expand...
Click to collapse
Well, you must look for a tutorial on how to flash stock recovery and install stock ROM again.
mathius89 said:
Hello, I tell you, after rooting the phone I installed the cwm recovery, after i install a ROM to restart it I was caught in the logo of Huawei, is there any solution?
Thank you.
Click to expand...
Click to collapse
did you wipe dalvik and cache ? if not try to do this in recovery, most bootloops are caused by this
mathius89 said:
I left 30 minutes and never passed the Huawei logo ... No solution?
Click to expand...
Click to collapse
CWM is not permanent recovery, put the UPDATE. APP in dload FOLDER on SD card and boot phone via 3 buttons.
Next time read thread carefully and use TWRP.
Sent from my HUAWEI P6-U06 using Tapatalk
alex.79 said:
CWM is not permanent recovery, put the UPDATE. APP in dload FOLDER on SD card and boot phone via 3 buttons.
Next time read thread carefully and use TWRP.
Sent from my HUAWEI P6-U06 using Tapatalk
Click to expand...
Click to collapse
What is the Update.app? Sorry for my ignorance but I have no idea.
thanks
mathius89 said:
What is the Update.app? Sorry for my ignorance but I have no idea.
thanks
Click to expand...
Click to collapse
Official firmware from Huawei. Has a many thread here in XDA.
Sent from my HUAWEI P6-U06 using Tapatalk
mathius89 said:
What is the Update.app? Sorry for my ignorance but I have no idea.
thanks
Click to expand...
Click to collapse
You flashed from CWM, that's why you have this problem. Download a ROM that can be flashed by dload method, and that ROM must be a stock ROM. Stock ROM's are not in a flashable zip's format, but they are in a form of an update.app file.
Create a folder in your sdcard and name it dload. In dload folder put the update.app file. After that press volume up + down + power button all at once until you see the HUAWEI logo, after that release those buttons.
For this to work you must have stock recovery.
BeyondTheHorizon said:
You flashed from CWM, that's why you have this problem. Download a ROM that can be flashed by dload method, and that ROM must be a stock ROM. Stock ROM's are not in a flashable zip's format, but they are in a form of an update.app file.
Create a folder in your sdcard and name it dload. In dload folder put the update.app file. After that press volume up + down + power button all at once until you see the HUAWEI logo, after that release those buttons.
For this to work you must have stock recovery.
Click to expand...
Click to collapse
Ok, when I can I will try. Thank you very much!
mathius89 said:
Ok, when I can I will try. Thank you very much!
Click to expand...
Click to collapse
You're welcome. Good luck and enjoy the new firmware.
My Huawei p6 is stuck at Huawei Ascend Logo screen or in TWRP menu.
Here is the history :
-From the stock Firmware, its been updated to B132 > B512 > B708
-TWRP installed and rooted.
-SD card partitioned and used Link2sd.
- Phone was working quite OKEY.
What Happened :
- I was fumbling with the phone, and accidently I used TWRP Advanced wipe (data, dalvik cache, system)
Now whats happening :
- Phone stuck at Huawei Ascend Logo screen
- If i press vol+ + vol - +power buttons, it goes to TWRP menu.
- in the TWRP menu, it shows NO OS INSTALLED at various places.
What I tried :
- I put the B708 zip file to SD card and tried flashing from TWRP.
md5 file not found, failed installing zip. FAILED.
- I tried B512 zip file too. same result.
Now the phone is always ON, in the Huawei Ascend Logo screen.
Note :
- I am not an expert user.
- The phone is not getting detected in windows.
How shall I get back to the B708 OS or atleast the stock firmware ?
ozshire said:
My Huawei p6 is stuck at Huawei Ascend Logo screen or in TWRP menu.
Here is the history :
-From the stock Firmware, its been updated to B132 > B512 > B708
-TWRP installed and rooted.
-SD card partitioned and used Link2sd.
- Phone was working quite OKEY.
What Happened :
- I was fumbling with the phone, and accidently I used TWRP Advanced wipe (data, dalvik cache, system)
Now whats happening :
- Phone stuck at Huawei Ascend Logo screen
- If i press vol+ + vol - +power buttons, it goes to TWRP menu.
- in the TWRP menu, it shows NO OS INSTALLED at various places.
What I tried :
- I put the B708 zip file to SD card and tried flashing from TWRP.
md5 file not found, failed installing zip. FAILED.
- I tried B512 zip file too. same result.
Now the phone is always ON, in the Huawei Ascend Logo screen.
Note :
- I am not an expert user.
- The phone is not getting detected in windows.
How shall I get back to the B708 OS or atleast the stock firmware ?
Click to expand...
Click to collapse
Are the files that you putting on sd card official update files or custom ones? Twrp csn only flash custom ones for the official you need stock recovery.
Sent from my SM-G850F
tileeq said:
Are the files that you putting on sd card official update files or custom ones? Twrp csn only flash custom ones for the official you need stock recovery.
Sent from my SM-G850F
Click to expand...
Click to collapse
Thanks for the support Tileeq.
The ROM file is
" B708_Repack_NeoArnet.V3". The one I used to update to kitkat 4.4.2, got from the XDA forum itself.
http://forum.xda-developers.com/ascend-p6/general/ascend-p6-b708-emui-3-0-international-t2991646
ozshire said:
Thanks for the support Tileeq.
The ROM file is
" B708_Repack_NeoArnet.V3". The one I used to update to kitkat 4.4.2, got from the XDA forum itself.
http://forum.xda-developers.com/ascend-p6/general/ascend-p6-b708-emui-3-0-international-t2991646
Click to expand...
Click to collapse
You cannot use TWRP to flash neoarnet's rom. It is an update.app file, so you need to flash the stock recovery onto your device, and then create a dload folder in the root of your SD card, and place the update.app file into the dload folder.
Do a local update using the Updater application.
miz_pimp said:
You cannot use TWRP to flash neoarnet's rom. It is an update.app file, so you need to flash the stock recovery onto your device, and then create a dload folder in the root of your SD card, and place the update.app file into the dload folder.
Do a local update using the Updater application.
Click to expand...
Click to collapse
Okey, That was quite an useful Info.
But How do I go back to Stock recovery ?
Updater Application is within the stock recovery I guess.. ?
ozshire said:
Okey, That was quite an useful Info.
But How do I go back to Stock recovery ?
Updater Application is within the stock recovery I guess.. ?
Click to expand...
Click to collapse
No, the updater app is on your home screen.
It might be called System Update, or similar, if you're not on Emui 3.0.
How did you install TWRP? The process is the same, except you need the stock recovery. I can't give a detailed description now, but there are many guides explaining the process.
i got the same problem, my phone ran out of battery and then put it to charge and got stuck on the android logo, i cant install any rom, it was updated to kk with emui 3.0, i put the dload folder on the sd card root and when i try to open it it only appears ../, and if i put the boot.img on the sd card root it tries to install the os but tells me e: signature verification failed and stop installing
miz_pimp said:
No, the updater app is on your home screen.
It might be called System Update, or similar, if you're not on Emui 3.0.
How did you install TWRP? The process is the same, except you need the stock recovery. I can't give a detailed description now, but there are many guides explaining the process.
Click to expand...
Click to collapse
I think I missed to tell you that, it seems the phone got no OS now. Its not going further the Huawei Ascend Logo screen at Startup. Then how shall i run the updater ? I am confused.
Or are you telling me that I should install the STOCK RECOVERY just like I did TWRP ?
Wont it be easier if I find a TWRP compatible ROM ZIP (kk, emui 3.0 ) ?
ozshire said:
I think I missed to tell you that, it seems the phone got no OS now. Its not going further the Huawei Ascend Logo screen at Startup. Then how shall i run the updater ? I am confused.
Or are you telling me that I should install the STOCK RECOVERY just like I did TWRP ?
Wont it be easier if I find a TWRP compatible ROM ZIP (kk, emui 3.0 ) ?
Click to expand...
Click to collapse
Yep, you did. And yes, I meant that you can install the stock recovery the same way you installed TWRP (using fastboot commands).
I just assumed since you already had that firmware, that you'd want to update to that, but yes, it will be easier to just install a ROM that that you can flash through TWRP.
Let me know how it goes.
miz_pimp said:
Yep, you did. And yes, I meant that you can install the stock recovery the same way you installed TWRP (using fastboot commands).
I just assumed since you already had that firmware, that you'd want to update to that, but yes, it will be easier to just install a ROM that that you can flash through TWRP.
Let me know how it goes.
Click to expand...
Click to collapse
I flashed emui_3.0_b709_by_oxalis_p6-u06_v04.zip this time. ( it was b708 before in the phone)
Using TWRP and the rom zip file.
It was a success.
But now there is no network !!!!! No sim inserted !!!
What happened ???
please help.
I was on b510 and wanted to move to b513. I downloaded the b513 zip copied it to my external SD. and followed these steps:
"
1. Make sure your device is running a B510 or other KitKat firmware
2. Download the ROM from link below and place it on the SD card
3. Reboot to TWRP recovery
4. Wipe data, system, custom storage, cache & dalvik cache
5. Flash B513.zip
6. Wipe cache & dalvik cache
7. Reboot
"
I did not move the zip to my internal memory. and flashed from my external SD. the installation failed and now when i try to reboot it says no OS installed. I am on TWRP 2.6.3.7
please guide me where to go from here
haseeb.sarwar said:
please help.
I was on b510 and wanted to move to b513. I downloaded the b513 zip copied it to my external SD. and followed these steps:
"
1. Make sure your device is running a B510 or other KitKat firmware
2. Download the ROM from link below and place it on the SD card
3. Reboot to TWRP recovery
4. Wipe data, system, custom storage, cache & dalvik cache
5. Flash B513.zip
6. Wipe cache & dalvik cache
7. Reboot
"
I did not move the zip to my internal memory. and flashed from my external SD. the installation failed and now when i try to reboot it says no OS installed. I am on TWRP 2.6.3.7
please guide me where to go from here
Click to expand...
Click to collapse
If you wanted to go on b513 it was better to use local update method. If you are able to install stock recovery than download official b513 and install it with 3 button method. And if you can't go back to stock than download some custom rom and install it with TWRP. If you can't find those versions than go to b708 or b709 repacked versions and if you don't like it than downgrade.
Sent from my HUAWEI P6-U06 using XDA mobile app
AdnanCG said:
If you wanted to go on b513 it was better to use local update method. If you are able to install stock recovery than download official b513 and install it with 3 button method. And if you can't go back to stock than download some custom rom and install it with TWRP. If you can't find those versions than go to b708 or b709 repacked versions and if you don't like it than downgrade.
Sent from my HUAWEI P6-U06 using XDA mobile app
Click to expand...
Click to collapse
thanks. i dont mind using a custom rom. can i flash this over???: http://forum.xda-developers.com/showthread.php?t=2630208
unlocked firmware? does it mean i need to unlock the boot loader
haseeb.sarwar said:
thanks. i dont mind using a custom rom. can i flash this over???: http://forum.xda-developers.com/showthread.php?t=2630208
unlocked firmware? does it mean i need to unlock the boot loader
Click to expand...
Click to collapse
I think you should be able to flash this.. as you can se there are some bugs, so consider again just to don't make yourself double jo job
Sent from my HUAWEI P6-U06 using XDA mobile app
AdnanCG said:
I think you should be able to flash this.. as you can se there are some bugs, so consider again just to don't make yourself double jo job
Sent from my HUAWEI P6-U06 using XDA mobile app
Click to expand...
Click to collapse
please can you tell me how can i flash TWRP 2.8.1.0. I have the img file, whenever i execute the command i get the message "waiting for device"
-------------------------
ok i managed to flash it. yay
haseeb.sarwar said:
please can you tell me how can i flash TWRP 2.8.1.0. I have the img file, whenever i execute the command i get the message "waiting for device"
Click to expand...
Click to collapse
What does it say when you type "adb devices" ?
Sent from my HUAWEI P6-U06 using XDA mobile app
Hello every body this is my first post
And i need help
My ascend p6 has stopped at logo of android i tried to install rom in zip via recovery cant and to format it cant again i used twrp tool to install recovery via pc and cant again and dowload rom in update.app and press + volume and - volume keys and power and failed again i used tool can install rom in update.app via pc like odin an it said failed to open serial port pls help me in fast
And Iam from Sudan & thanks
Up
amooryalonso said:
Up
Click to expand...
Click to collapse
What firmware was on it before?
Sent from my SM-G850F
Stock rom 4.1.2
I was putting it in the charge in night i woke up and found it at the logo only
amooryalonso said:
Stock rom 4.1.2
I was putting it in the charge in night i woke up and found it at the logo only
Click to expand...
Click to collapse
Try downloading a new firmware (i would suggest B125). Unpack the update.app file and put it in a fokder named dload on the root of an sdcard and try to enter the recovery. Report back on status.
Sent from my SM-G850F
I tried b125
B510
But all failed
Then maybe try the custom ones? Flash twrp and then cm 11.
Sent from my SM-G850F
I tried it but failed
Any thing i tried failed
What it will cost me if i gave it to huawei costumer care????
Pls help me & thanks
amooryalonso said:
I tried it but failed
Any thing i tried failed
What it will cost me if i gave it to huawei costumer care????
Pls help me & thanks
Click to expand...
Click to collapse
Well depends on what will they find as a problem, if its the motherboard maybe it will be around 50 euros, if they can install a new system then significantly less.
Sent from my SM-G850F
Ok thank you