Hi ll,
I really out of ideas here .
I was running Pays 1.9 Bravesoul ROM without any issues for about 4 months on my unbranded Desire(HBOOT 0.75)!
Today I decided to update to Froyo.
I used Rom Manager to upgrade to OpenDesire 3.03 and Radio 32.43.00.32U_5.09.00.20.
Every thing went well, except that I noticed that the MIC doesn't work at all.
Not when I make or receive a call, Not if I try to Mute/Unmute it, Not if i try to Record sound, or Video or WHATEVER!!! The only way the other side can hear me is trough my BT headset.
So I tried to use the LeeDroid 1.7a ROM but same result. Also tried to use different Radio - 32.42.00.32U_5.09.00.08.
I then Nandroid restore to my 1.9 Pays rom (Wiping Data+Cach+ext), but still doesn't work. I tried different Radios:
32.37.00.32U_4.06.00.16_2
32.36.00.28U_4.06.00.02_2
32.26.00.24U_4.04.00.03_2
same thing...
I finally Unrooed my Desire to v1.15.4 Radio 32.30.00.28U_4.05.00.11 without any luck!
So I'm pretty hopeless Please if someone also have / had this issue, Please share!
Thanks!
sounds to me like it's broken mate
i know it's coincidence that it broke as you changed ROM but if it doesn't work on anything there's no explanation
have you tried a hard reset + clearing caches?
if you have then unroot your phone, put it back to your original RUU for warranty purposes and sent it back for repair
by what do you mean Hard Reset?
I wiped all data, I've changed roms.
Currently It's unrooted...
Is it possible for the Radio update to do this? (all the updates went without a hitch)
Or maybe the OpenDesire ROM (I see that v3.03 is removed, do you know why?) did this?
There is no way it a coincidence. I making phone calls all the time, The update took me about 15 min, after which I tried the Video camera and noticed there was no sound...
Thanks!
well, I noticed that the mic works, but extremely week! I really need to shout in order to hear a whisper... I do this in recording...
I'm starting to believe that maybe it's the mimbrein (Or the piezzo) that is ruined inside the mic...
Is it possible to control the gain in software? (Is there still a chance that the S.W upgrade caused this?)
Hello. I have a problem with sound in my kaiser with Android. I tried 2 systems [Cynanogen mod 6 (Froyo) and Myn's Warm Donut], 4 radios (from 1.71 to 1.65) and 2 kernels. Sound never appeared. Why?
what zimage or nbh you using if you are using a older one it might have problems
Did you mean kernel? the newest from this page:
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
it may be that you have muted the media volume in settings.
No. I don't have any sound. Not only media. When someone calls to me, I cannot hear him too and this person cant hear me too.
Audio issue
I have the same problem. I tried different builds and nothing helps. Any suggestions??
Just a thought, but have you tried flashing a stock rom, then flashing to nand again? Flashing a stock rom clears the entire nand, leaving no possibility of stray bits of data left from custom roms.
I have to say, I get the same thing, but with a slight variation. Sound works for me up until i make at least one call (but could happen before that). Once I make that call, either during the call, or after, the sound is gone. I too had myn's donut, and then frayo, and both times, the exact same problem. I will try to flash the stock rom, and then back to android, but it is a problem that I also share.
This is my first post on xda, so please be nice!
<refresh>.
Mu_aawiyah said:
I have to say, I get the same thing, but with a slight variation. Sound works for me up until i make at least one call (but could happen before that). Once I make that call, either during the call, or after, the sound is gone. I too had myn's donut, and then frayo, and both times, the exact same problem. I will try to flash the stock rom, and then back to android, but it is a problem that I also share.
This is my first post on xda, so please be nice!
Click to expand...
Click to collapse
Yeah, flashed it back to a the most recent stock rom, and then back to andriod.. how works perfectly. Sorry i didnt tell you guys earlier.
I think it was to do with the radio thingy-ma-jig. I flashed it with winmo 6.1 from htc website, and then back again.
Now i'm runnying frayo.
I flashed the newest stock rom from htc site too, then 1.65 radio, but it didn't help :/
Wagierek said:
I flashed the newest stock rom from htc site too, then 1.65 radio, but it didn't help :/
Click to expand...
Click to collapse
That is most likely because you didnt flash it right. take the .nhb from it, plug it into your sd card and flash it from sd. try that.
I'm not stupid. I always flash anything like that-not via CustomRUU-because I have damaged my USB socket and now my Kaiser cannot be recognized by computer.
PS: Today when I booted my Kaiser, next to ANDROID word, I saw "handset status changed to 1". When I rebooted, it didn't show. What's this?
Wagierek said:
I'm not stupid. I always flash anything like that-not via CustomRUU-because I have damaged my USB socket and now my Kaiser cannot be recognized by computer.
PS: Today when I booted my Kaiser, next to ANDROID word, I saw "handset status changed to 1". When I rebooted, it didn't show. What's this?
Click to expand...
Click to collapse
Well, with regards to how I got it fixed (the detailed explanation), i flashed it with a custom winmob rom initially, but surprisingly, the same problem i had with android was happening with the winmob. I could make a call after reboot, but after that call, the sound completely died, and the camera did not work. So i tried to flash with the latest stock rom. I've uploaded the actual roms i used on my public drop box folder here => "i tried posting the link, but because i'm new, it wouldnt allow me...pm me"
I am not a professional on flashing, rather i am a beginner. My tytn 2 is a european T-mobile version. I tried to flash it, it did it half way...then stopped! I tried to do it again, but then it just said "...loading..." and would not go past it. But when i booted to my custom rom, it was still there, but the problems had gone. I guessed that it flashed the radio, and nothing else.
When i then went to android, it worked perfectly.
That was my journey.
I hope that helped... maybe.
Unfortunately, it didn't help.
Any other ideas?
I solved mine by changing radio ROM,but i lost sound and camera in windows,any ROM that fit both android and windows???
What version did you flash?
1.65.14.06
Me too!
I flahsed froyo last night and didn't test after makng calls. I'm having the same issue (lose sound after a phone call). I followed the sticky guide and sim unlocked the radio before flashing (which I think I had already done before). I will try changing radios when I get home to see if this resolves the issue and post my results.
Update: I flashed 1.71.09.01 on my ATT Tilt and this fixed the issue. Now sound and camera work great. Phone runs faster also!
Hello fellow XDAers,
I recently went through the flash dance for my Sprint Blue L710 S3 16GB to switch it from some old version of CM 10(.2?) to the latest nightly of CM11. I essentially followed this guide to get my phone up to the latest and greatest and flashed pa_gapps-modular-micro-4.4.4-20141110 to give the the level of GApps I'm comfortable with.
Now I tried to follow the same guide with my wife's Sprint "White" S3 32GB L710. Right off the bat the phone wouldn't boot after the oneclick flash - it got stuck on the loading screen (I waited 30 minutes on the boot screen before giving up... twice). Only after I flashed Philz 6.5.14 recovery was it able to properly boot into the OS (potentially a PIT problem, but all 32GB PIT files seem to be removed from the web). In the stock ROM, phone mic, sound, voice dialer, and Google Search all worked (and I tested this several times during recovery attempts). It noticed it hadn't taken advantage of all 32GB available on the phone, so it decided to expand the partition itself (bonus?). Then I flashed the latest nightly CM11...
Once booted, I cannot get the dialer to behave correctly. I installed the GApps after booting up the ROM once (and tried again on a fresh install by installing it prior to first boot). Immediately after boot, using the Phone app and dialing a number the screen turns to a blank (black) screen. The phone dials fine, but once connected to the number being dialed, there is no sound or mic. When I open the Sound Recorder app, it says "internal application error" and "microphone may be in use". When I try to do "OK, Google", it acts like the microphone isn't able to be accessed. When I open Apollo to listen to anything, DSP Manager force closes. It's as if the hardware can't be accessed by the ROM. SMS, cell network, WiFi, and GPS all work. It seems familiar to this CM thread, but the same steps aren't working for me.
I've flashed a few ROMs based off of AOSP (Slim and AOKP mainly), but none of them seem to allow me to utilize the mic and speaker of the phone. Only ROMs based directly off of sto k ND8 let me "phone out". For instance, stock ND8 works as well as Wicked-X.
I've flashed multiple ways, cleaned/formatted several times, and tried all sorts of tricks to get this to work on my wife's phone. I'd like to believe I've done enough research to feel like coming to the community is my last resort. As a software developer myself, I know there's probably something simple I've missed, but can someone please help me figure out why my "blue" L710 is working but not my wife's "white" 710?
Thank you very much in advance.
sorry if this is abit long winded,
hey everyone, not sure whats going on here. this is the tmob variant but i had moved over to a gt-i9505 rom dandroids stock gpe 5.0 back almost a month ago, this was upgraded from jamals 4.4.4 gpe which was working great. i installed the googly 1.2.3d kernel and that was also working well. i noticed that i forgot to fully reset all my storage and noticed jamal brought out a 5.0 rom so i swaped to that and wiped everything about a week ago and at first didint notice any issues.
then i recived a call and answered it on the handset and for the first few mins it was working fine all of a sudden something glitched and i had no audio like the call droped i hung up called back no audio. reset the phone same thing. just a day before this happened i updated the kernel to 1.2.5 googly for gpe5, so i figure this is it so i reflash and reset storage and no change. oddly this entire time there have been no problems with calls when using my bluetooth headset.
long story short i have installed and wiped one about 3 different roms including the dandroid that was working ok. i am now all the way back to the 4.4.4 jamal rom that i was on before i started and the problem is persisting. when i call someone the other party hears a high pitch squealing sound but only via the handset the "ok google" is working fine. i have not restored the nandroid backup yet.
baseband is m919uvufnb4
i have the current version of the twrp as what i have been installing everything from.
happy to provide more info. i know im still on the pre knox bootloader
and when i get home im going to try my wife sim see if that changes anything.
Update
Wife's sim changed nothing
Also wanted to say that I also read about a apn reset trick that was supposed to help. I did fix it one time but it recurred again and and since stopped working
Having that same issue gpe 9505 5.0 no audio in calls unless I'm using Bluetooth no handset no speaker
You guys Ned to update your bootloader and everything will be fixed.
You can only get so far with ancient bootloaders before the wheels come off.
Pp.
How do you do that
You need to Odin the latest version NK2, you can find it in general section, ShinySide has a mega link to download firmware.
Follow instructions and you will have a S4 that works properly.
You can use chainfire's auto root in original development to root.
Pp.
Hi all,
Actual my phone was working good until i install resurrection remix latest build for it through TWRP obviously. after successful booting into OS, there was no sound either on Music player, incoming call or even ringtones. It neither picks up the call nor it dials !
My Data is working fine, WiFi is good, signals are good. so i though might be the drivers are corrupt and i did MSM tool procedure having Nougat system image. No matter what i do, which ROM i try !! it behave the same
PS. I never rooted my phone ever !
Please assist.