Hello. I have a problem with sound in my kaiser with Android. I tried 2 systems [Cynanogen mod 6 (Froyo) and Myn's Warm Donut], 4 radios (from 1.71 to 1.65) and 2 kernels. Sound never appeared. Why?
what zimage or nbh you using if you are using a older one it might have problems
Did you mean kernel? the newest from this page:
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
it may be that you have muted the media volume in settings.
No. I don't have any sound. Not only media. When someone calls to me, I cannot hear him too and this person cant hear me too.
Audio issue
I have the same problem. I tried different builds and nothing helps. Any suggestions??
Just a thought, but have you tried flashing a stock rom, then flashing to nand again? Flashing a stock rom clears the entire nand, leaving no possibility of stray bits of data left from custom roms.
I have to say, I get the same thing, but with a slight variation. Sound works for me up until i make at least one call (but could happen before that). Once I make that call, either during the call, or after, the sound is gone. I too had myn's donut, and then frayo, and both times, the exact same problem. I will try to flash the stock rom, and then back to android, but it is a problem that I also share.
This is my first post on xda, so please be nice!
<refresh>.
Mu_aawiyah said:
I have to say, I get the same thing, but with a slight variation. Sound works for me up until i make at least one call (but could happen before that). Once I make that call, either during the call, or after, the sound is gone. I too had myn's donut, and then frayo, and both times, the exact same problem. I will try to flash the stock rom, and then back to android, but it is a problem that I also share.
This is my first post on xda, so please be nice!
Click to expand...
Click to collapse
Yeah, flashed it back to a the most recent stock rom, and then back to andriod.. how works perfectly. Sorry i didnt tell you guys earlier.
I think it was to do with the radio thingy-ma-jig. I flashed it with winmo 6.1 from htc website, and then back again.
Now i'm runnying frayo.
I flashed the newest stock rom from htc site too, then 1.65 radio, but it didn't help :/
Wagierek said:
I flashed the newest stock rom from htc site too, then 1.65 radio, but it didn't help :/
Click to expand...
Click to collapse
That is most likely because you didnt flash it right. take the .nhb from it, plug it into your sd card and flash it from sd. try that.
I'm not stupid. I always flash anything like that-not via CustomRUU-because I have damaged my USB socket and now my Kaiser cannot be recognized by computer.
PS: Today when I booted my Kaiser, next to ANDROID word, I saw "handset status changed to 1". When I rebooted, it didn't show. What's this?
Wagierek said:
I'm not stupid. I always flash anything like that-not via CustomRUU-because I have damaged my USB socket and now my Kaiser cannot be recognized by computer.
PS: Today when I booted my Kaiser, next to ANDROID word, I saw "handset status changed to 1". When I rebooted, it didn't show. What's this?
Click to expand...
Click to collapse
Well, with regards to how I got it fixed (the detailed explanation), i flashed it with a custom winmob rom initially, but surprisingly, the same problem i had with android was happening with the winmob. I could make a call after reboot, but after that call, the sound completely died, and the camera did not work. So i tried to flash with the latest stock rom. I've uploaded the actual roms i used on my public drop box folder here => "i tried posting the link, but because i'm new, it wouldnt allow me...pm me"
I am not a professional on flashing, rather i am a beginner. My tytn 2 is a european T-mobile version. I tried to flash it, it did it half way...then stopped! I tried to do it again, but then it just said "...loading..." and would not go past it. But when i booted to my custom rom, it was still there, but the problems had gone. I guessed that it flashed the radio, and nothing else.
When i then went to android, it worked perfectly.
That was my journey.
I hope that helped... maybe.
Unfortunately, it didn't help.
Any other ideas?
I solved mine by changing radio ROM,but i lost sound and camera in windows,any ROM that fit both android and windows???
What version did you flash?
1.65.14.06
Me too!
I flahsed froyo last night and didn't test after makng calls. I'm having the same issue (lose sound after a phone call). I followed the sticky guide and sim unlocked the radio before flashing (which I think I had already done before). I will try changing radios when I get home to see if this resolves the issue and post my results.
Update: I flashed 1.71.09.01 on my ATT Tilt and this fixed the issue. Now sound and camera work great. Phone runs faster also!
Related
I have a imported DIA100 phone, and trying it on the T-mobile network here in the states. everything was fine up until today when i upgraded my phone to the 1.93 series, now it randomly shuts off, and it cannot connect to the T-mobile network, keeps saying (searching). I don't know what's going on, I reflashed the device and it still does the same thing, infact it might even be worse now. Restarting the phone doesn't work, as it keeps restarting from the boot. Anyone have any idea what to do? I'm going back to 1.35.
Intradvocate said:
I have a imported DIA100 phone, and trying it on the T-mobile network here in the states. everything was fine up until today when i upgraded my phone to the 1.93 series, now it randomly shuts off, and it cannot connect to the T-mobile network, keeps saying (searching). I don't know what's going on, I reflashed the device and it still does the same thing, infact it might even be worse now. Restarting the phone doesn't work, as it keeps restarting from the boot. Anyone have any idea what to do? I'm going back to 1.35.
Click to expand...
Click to collapse
i too have many problems with 1.93.456.2 WWE baserom. somehow, it just doesn't seem so stable ... not sure if many others are feeling the same for 1.93 roms. i guess 1.37.456.2 ME WWE is still the most stable at the moment...
if only we can have a review on all official rom consolidated in one thread.
Sprite?
Did you use Sprite to backup your previous rom and store it in 1.93xxx?
This could be the cause.
ruffruff said:
i too have many problems with 1.93.456.2 WWE baserom. somehow, it just doesn't seem so stable ... not sure if many others are feeling the same for 1.93 roms. i guess 1.37.456.2 ME WWE is still the most stable at the moment...
if only we can have a review on all official rom consolidated in one thread.
Click to expand...
Click to collapse
Yes i had same problems. imo the 1.93 isnt a stable rom(yet) so im back with 1.37.456.2 this one is just perfect,very stable,less memory leakage.
Well, the problem is still on going. I can't flash my phone anymore for some reason, even though I've tried both, unsigned and signed Hard-SPL, which both of them flash fine. However, the phone gives me error [276] update error. So not sure what exactly is going on here.
Also, no, didn't sprite backup, phone's just being retarded, mobilecityonline will repair it, but it will take almost 4-6weeks, I cannot wait that long. What else should i try?
Okay, nope not fixed... Flashed it with 1.37, connected to the network for a few seconds, dialed somebody and no ring or anything, but when i called my phone i could hear my own voice. So I guess i have to send it in for repair. Damn.
berlinberlin said:
Did you use Sprite to backup your previous rom and store it in 1.93xxx?
This could be the cause.
Click to expand...
Click to collapse
Could you please detail? I've flashed 1.93.xxx just in the day it appeared on the site and after flashing, I've restored the backup made with Sprite Backup to preserve the settings and so on. I wasn't worried about the contacts/calendar since I have them in Outlook, but I didn't want to start all over with settings, install programs and so. I've made the restore in "upgrade mode", restoring also the databases. The result was that I got a verry strange TF3D, displaying "Home" between the operator name and date, and strange behaviour. I've seen also that the animations were taken out so I've flashed back 1.37.xxx.3. Could be any problems generated by the restore operation? Should I use a different restore type (eventually not selecting "restore databases")?
I have had no problem with the new 1.93xx rom.
Touch FLO 3d is quicker (probably because the animation is disabled)..
and the battery life is about 20% better
Radio ROM Anyone
Sounds like the Radio...
What version is everyone on? The 1.93 ROM updates the Radio, have you tried downgrading to 03?
mhbr12742 said:
Sounds like the Radio...
What version is everyone on? The 1.93 ROM updates the Radio, have you tried downgrading to 03?
Click to expand...
Click to collapse
I am on 05 and has no problem ( have been using it for a day now)
I don't know, but If i plug the diamond into my adapter, the network suddenly works and I can actually make calls and everything's fine and dandy, but just on the battery, I can't call anyone, and if I pull out the adapter when the phone gets a signal, the signal stays but again, can't call anyone because i can't hear anything.
It's an awkward problem. I'm not sure if it's my battery or something. So I'm getting another battery off ebay since they don't sell HTC Touch Diamonds in the U.S. yet.
I've been having random freezes with the 1.93.xxx
Anybody else experienced that?
A.
adwinp said:
I've been having random freezes with the 1.93.xxx
Anybody else experienced that?
A.
Click to expand...
Click to collapse
Yes, me I had same problem twice - freezes on PIN input screen, second problem with this release is that sometimes PIN screen doesn't appear. Now I'm back on 1.37 and everything seems to be ok
Intradvocate said:
I have a imported DIA100 phone, and trying it on the T-mobile network here in the states. everything was fine up until today when i upgraded my phone to the 1.93 series, now it randomly shuts off, and it cannot connect to the T-mobile network, keeps saying (searching). I don't know what's going on, I reflashed the device and it still does the same thing, infact it might even be worse now. Restarting the phone doesn't work, as it keeps restarting from the boot. Anyone have any idea what to do? I'm going back to 1.35.
Click to expand...
Click to collapse
THe Problem you've encountered:
1. Random auto reboot
2. Random freeze
3. etc.
It's sounds familiar to me. Well it's maybe have to do with SPL just like the Kaisers do.Well, I said maybe... So, what we did to our Kaiser before is flashing the HardSPL which has the same version number as the ROM flashed. So, if you're using ROM 1.93 then the HardSPL should be flashed is Olinex HardSPL 1.93 or you can try one by one of the developed HardSPL existed in this forum. My saying is, go with HardSPL 1.93 and see what happen. If it's still no go then it must have to do with the ROM itself.
Just my 2cents.
Hi ll,
I really out of ideas here .
I was running Pays 1.9 Bravesoul ROM without any issues for about 4 months on my unbranded Desire(HBOOT 0.75)!
Today I decided to update to Froyo.
I used Rom Manager to upgrade to OpenDesire 3.03 and Radio 32.43.00.32U_5.09.00.20.
Every thing went well, except that I noticed that the MIC doesn't work at all.
Not when I make or receive a call, Not if I try to Mute/Unmute it, Not if i try to Record sound, or Video or WHATEVER!!! The only way the other side can hear me is trough my BT headset.
So I tried to use the LeeDroid 1.7a ROM but same result. Also tried to use different Radio - 32.42.00.32U_5.09.00.08.
I then Nandroid restore to my 1.9 Pays rom (Wiping Data+Cach+ext), but still doesn't work. I tried different Radios:
32.37.00.32U_4.06.00.16_2
32.36.00.28U_4.06.00.02_2
32.26.00.24U_4.04.00.03_2
same thing...
I finally Unrooed my Desire to v1.15.4 Radio 32.30.00.28U_4.05.00.11 without any luck!
So I'm pretty hopeless Please if someone also have / had this issue, Please share!
Thanks!
sounds to me like it's broken mate
i know it's coincidence that it broke as you changed ROM but if it doesn't work on anything there's no explanation
have you tried a hard reset + clearing caches?
if you have then unroot your phone, put it back to your original RUU for warranty purposes and sent it back for repair
by what do you mean Hard Reset?
I wiped all data, I've changed roms.
Currently It's unrooted...
Is it possible for the Radio update to do this? (all the updates went without a hitch)
Or maybe the OpenDesire ROM (I see that v3.03 is removed, do you know why?) did this?
There is no way it a coincidence. I making phone calls all the time, The update took me about 15 min, after which I tried the Video camera and noticed there was no sound...
Thanks!
well, I noticed that the mic works, but extremely week! I really need to shout in order to hear a whisper... I do this in recording...
I'm starting to believe that maybe it's the mimbrein (Or the piezzo) that is ruined inside the mic...
Is it possible to control the gain in software? (Is there still a chance that the S.W upgrade caused this?)
After installing Radio 2.05.00.06.11 (dinc_ota.zip), my handset speaker audio disappears. Speakerphone and bluetooth work fine, but no luck with the internal speaker.
Heres the kicker:
Once I restore the 1.0 Radio, the internal speaker starts working again.
After lots of searching, this seems to be a very intermittent problem. I've only found two other people experiencing the same issue. Unfortunately I have not found a solution.
Does anybody have any idea as to what my next step should be to try and solve this?
Thanks!
I have the same problem...
heega1 said:
After installing Radio 2.05.00.06.11 (dinc_ota.zip), my handset speaker audio disappears. Speakerphone and bluetooth work fine, but no luck with the internal speaker.
Heres the kicker:
Once I restore the 1.0 Radio, the internal speaker starts working again.
After lots of searching, this seems to be a very intermittent problem. I've only found two other people experiencing the same issue. Unfortunately I have not found a solution.
Does anybody have any idea as to what my next step should be to try and solve this?
Thanks!
Click to expand...
Click to collapse
Try downloading a fresh copy of the update and running it again?
It's working just fine for too many people for it to be a problem with the update itself.
douger1957 said:
Try downloading a fresh copy of the update and running it again?
It's working just fine for too many people for it to be a problem with the update itself.
Click to expand...
Click to collapse
updating the radio twice will brick the phone! same one that is.
zeke1988 said:
updating the radio twice will brick the phone! same one that is.
Click to expand...
Click to collapse
not exactly. but, this radio isnt a image, its a patch. and a double patch is not the same thing... there is no error checking. dont do it!
I've tried re-installing the update 3 times from three sources. At first I thought it was the Froyo update so I went back to my nand backup and that didn't help, but once I downgraded the baseband it magically started working again.
So I tried it again. Re-downloading all the tools and packages. Only for it to happen again right after the Radio update. So I reverted back, cleared everything to factory, did a fresh install, then did the upgrade once more.... Still same problem.
Since it is such an intermittent issue, I'm thinking that maybe the hardware is to blame. The particular handset that I have is a warranty replacement from Verizon (blown speakers on first one). Maybe that has something to do with it.
Anyone have any other theories?
Thanks!
So I'm stumped. It's a pretty straightforward process, and I can't see where I'm going wrong.
Next Step: Warranty Replacement. We'll see if that helps. I'll be sure to record the serial number and other details of the phone before I send it back. Maybe we can find a pattern.
It will be a couple days before the new phone arrives. If you have something I can try, please suggest away!
Thanks!
I am having the exact same problem. I have tried both 2.x radios and both have the same effect. I want to use froyo but the only way to is to use speakerphone or a plugged in headset. I tried to take it in yesterday but the tech at verizonwireless told me to wait it out until 2.2 comes out to see if that fixes my problems. ( went in stock told them I was having the problem on stock radio) final problem being is when official does come out and it kills my headset speaker is it going to be too late to root my phone knowing the replacement I get will already be loaded with the new software.
Chicken and Egg
Unfortunately, unrEVOked has not developed a S-ON patch. This means that you will either have to take stock 2.2 which will be unrootable -or- you will patch forever, have S-OFF, get stock 2.2 and not be able to return the phone if the problem doesn't clear up.
Please keep that in mind when making your decision.
The replacement phone worked...
Not sure what the problem was, but it confirms my method for installing 2.2 wasn't flawed..
Thanks for all your help!
-j
I am trying to get verizon to send me a new one. They are not being very helpful right now. They said the audio issue is a software issue that should be fixed with the new update but might send me a new phone due to number of dropped calls. I have to stop in store tomorrow
This happened all of a sudden, and I'm really not sure why. The camera is just a black screen, which can only be minimised by pressing the home button. The headphone jack recognises nothing.
At first I thought it was the ROM (LeeDroid 2.2f), so I wiped the data/cache/dalvik cache and reverted to Pinky's 1.8. I've also tried AuraxTSense 8.1.4 with no luck. All ROMs work perfectly fine except this issue.
After looking it up, everyone seems to jump at the radios. I flash radios by picking the zip file whilst in recovery (clockwork), installing, rebooting and having it write the image, not touching my phone while it boots up, and having it show the new flashed radio in the options/bootloader sections.
I have tried the specific radios linked to in the OP of each of the ROMs, and I have tried the latest ones. I've been through about 5 at least today on multiple ROMs, with no luck.
I really want my camera and headphone jack back. Please help.
Try going back to stock rom. If that doesn't solve it, then I think you have a hardware problem.
I'm currently trying a rooted version of 2.10.405.2 including radio from this thread. Is that sufficient testing of going back to stock (because my backup software requires root) or does it have to be RUU?
Edit: That rooted stock ROM has the same issue -_- will try RUU.
Edit 2: The flash LED no longer works either. For example the torch application.
The camera app is still just a black screen. No menu, no way to quit except terminating the process.
The headphone socket is still dead. The halfway-in trick doesn't work either.
These parts are all very close to each other, so I'm leaning towards hardware. However the phone can still make/receive calls, messages, wifi, 3G, etc... everything apart from camera, rear LED and headphones.
This seems to happen a lot according to Google. Will think twice about getting another HTC phone.
Hi all,
I've been having a very annoying problem recently with almost every ROM I have tried. I suspect that I may need to update my Radio but I don't want to try unless I'm sure this is the problem (I understand that it's riskier than flashing a custom ROM).
When I answer my phone (only from certain people) I will not be able to hear them, however whenever I speak my voice will come straight back through the speaker into my ear. I can ring anyone perfectly fine which is strange.
I have tried this with both Oxygen and Cyanogenmod ROMS (both on Froyo and Gingerbread).
My radio baseband is:
32.48.00.32U_5.11.05.14
I think this may be quite a long time out of date? Is this the problem?
Many thanks as this problem is driving me nuts!
-Rich
Ok I've just used ROM manager to get back to stock and the problem is still there
I have no idea what this could be now!
I doubt flashing the radio will actually fix it but I suppose you could try it. It's very simple to do. Just drop the radio zip file on the root of your SD then flash via Recovery. Takes seconds.
jordan.harris01 said:
I doubt flashing the radio will actually fix it but I suppose you could try it. It's very simple to do. Just drop the radio zip file on the root of your SD then flash via Recovery. Takes seconds.
Click to expand...
Click to collapse
Any ideas what it could be besides this?
Is it happening all the time? Could i just be your network acting up for a bit?
jordan.harris01 said:
Is it happening all the time? Could i just be your network acting up for a bit?
Click to expand...
Click to collapse
Unfortunately not, I've had this problem for about a couple of weeks now. And it's happened quite a few occasions.
My mothers mobile phone is a good way to test if anything has worked as she can never get through! I can ring her though which is the strange thing.....