Hi
ADK is working fine with my other devices, but my PC can't seem to install the drivers for Huawei Watch. The devices is in the device manager, but a little yellow triangle at the side, which means the device drivers are not installed.
I have tried Google, but the guides just say install the devices drivers but clicking update in Device manager with the xx file I downloaded, but windows can't see the file.
Thanks in advance
only pdanet drivers works for me for adb but in twrp i cannot connect to pc . how have you solved the issue i have same problem in device manager. tried more than 6 ways after googling pc
i've tried pdanet drivers 64bit on my win7 64bit version.
but the installation cannot continue.. did u success installing pdanet ? what version of your windows u have ?
why is this marked as solved because i dont see the solution. i just received my watch today and cant seem to get device manager to recognize any drivers.
PDAnet doesnt fully install because i cant install drivers
Minimal ADB and fastboot dont recognize any devices attached
Universal Naked driver 0.73 doesnt work even after modifying the android_winusb file
I even installed the Google USB driver from the SDK Manager, but i dont see anything on my machine.
ive had this watch for 2 hours and already frustrated as hell lol. can someone provide assistance?
thanks!
PS. im running this on Windows 7 64 bit and the watch is at LCB43B already
same problem with me.. attaching usb cable into charger dock, detect huawei watch in device manager but drivers cannot be installed..
what's the problem ? which drivers can be used ?
hendry said:
same problem with me.. attaching usb cable into charger dock, detect huawei watch in device manager but drivers cannot be installed..
what's the problem ? which drivers can be used ?
Click to expand...
Click to collapse
i was trying all day on my work computer which runs windows 7 x64 with no luck, but the watch was detected immediately on my windows 10 machine at home. strange.
Success!
I fixed my issue! I had the same issue everyone here mostly had. I could unlock the bootloader, but I couldn't get the Fastboot recovery to work because the drivers were not detected by Windows 10, or my other Windows 7 machine. Both machines installed a standard version of Google Android device drivers and boot loader drivers, but they were not detected by ADB commands once in the bootloader.
First I went here to download all the drivers, but got stuck:
http://www.thecountrycaller.com/37260-how-to-unlock-huawei-watch-bootloader-and-flash-twrp-recovery/
So what I did was ran the commands to reboot to bootloader, then flash commands for the recovery, left my device plugged in. Then I went into the Windows Device manager, and looked for the Android or Adb drivers loaded. I double clicked the driver, and clicked on uninstall driver, and told windows to delete the drivers. I then unplugged my device (still in bootloader mode), plugged it back and in windows instantly detected the ADB flash commands and boom, TWRP recovery completed.
Hope this helps some of you.
this did not solve my issue ive installed the drivers and nothing over and over can someone help me with the drivers please
thanks
running windows 7
tried to install every driver possible
Weird as it may be, I managed to get Hwatch to connect to ADB via USB by installing the watch as a Motorola Android Sooner Composite ADB Interface - in device manager-update driver-select from PC-select from device list-android usb device-motorola
Is there anything what i can do when my classic watch is NOT recognized on both pc and notebook? I hear no sound, i can´t see anything in device manager...any help?
Hi I`m using the huawei 2 LTE version - can I take the same driven from here or will that cause problems ?
---------- Post added at 08:11 AM ---------- Previous post was at 08:09 AM ----------
Is this may be a real help https://www.reddit.com/r/hwatch/comments/3n9ckp/how_to_get_adb_access_over_usb/
Related
I am unable to get USB connection working with my phone for development purposes. I have turned on the USB debugging and connected the device with USB cable and it does detect file transfer capabilities, but I am unable to get the ADB connection working.
I am running Windows XP SP3
It says it has found a device 'Galaxy' but is unable to install drivers for it.
What I have tried:
sdk/extras/google/usb_driver directory
I tried installing PdaNetA302.exe
I tried installing Samsung_USB_Driver_for_Moblie_Phones_v1_4_6_0.exe
I selected 'install from specific location' -> choose a driver -> 'Android Phone' but it had none listed and the aforementioned driver directories did not work either when I selected them as 'Have Disk' options.
I also tried uninstalling all related devices and do the whole connecting thing again, but without success.
Help please?
SOLUTION
Apparently HTC drivers got in the way. After I removed all HTC drivers from my Windows XP, restarted and connected the device, the Samsung drivers kicked in and made it work.
To remove unused drivers from Windows XP you can follow this guide.
Thanks for posting your experience.
Another problem I found, was that there's a different SamsungDriver.exe floating around, 8341kb. DOES NOT complete the ADB drivers necessary.
After installing the v1.4.6 drivers mentioned above, golden!
---------- Post added at 11:47 AM ---------- Previous post was at 11:41 AM ----------
Spoke too soon.
ADB recognizes it when it's booted in ICS, but while in the bootloader, it's not picked up. Thus fastboot commands won't work!
Windows 7 gives me a Android 1.0 driver not installed error.
Anyone?
PdaNet
waylo said:
Thanks for posting your experience.
Another problem I found, was that there's a different SamsungDriver.exe floating around, 8341kb. DOES NOT complete the ADB drivers necessary.
After installing the v1.4.6 drivers mentioned above, golden!
---------- Post added at 11:47 AM ---------- Previous post was at 11:41 AM ----------
Spoke too soon.
ADB recognizes it when it's booted in ICS, but while in the bootloader, it's not picked up. Thus fastboot commands won't work!
Windows 7 gives me a Android 1.0 driver not installed error.
Anyone?
Click to expand...
Click to collapse
I had no end of problems getting adb and fastboot working for GN due to the usb driver problems.
After much Google-ing...
I installed PdaNet on my laptop and this installed all required drivers in the process of installing, you can then un-install PdaNet and the required drivers are still on your system.
I now have adb and fastboot working for both my Nexus One and Galaxy Nexus phones on my Windows 7 x64 laptop.
Hope this helps!
Thanks to XDA member el3ctrik for this tip!
Thanks, figured it out just after you posted. The PDANet drivers were the trick, in #3 below (don't need to actually run the installation in this case).
You'd think after 1.5 years of playing/hacking/unhacking/fixing and refixing the N1 I'd know how this is supposed to work.
A couple of comments, since some tutorials are based on older installations.
1. Installing android sdk. I went through a crapload of unnecessary trouble in trying to reinstall these, thinking that the usb drivers, adb, and fastboot needed to be updated. NO.
1a. In fact, in trying to reinstall the android sdk, you have to install the Java SDK. THEN, with the latest revision, R15, FASTBOOT IS MISSING! Need to pull that from a r13 zip.
2. You need the CORRECT samsung drivers. The ones mentioned above are the correct ones. I installed some limited half-ass versions which did not do the job.
3. You need FASTBOOT drivers. These were found from this post http://forum.xda-developers.com/showpost.php?p=9919944&postcount=1
which states:
http://www.fileserve.com/file/5bgRBX5 (PDAnet x86 and x64 which are the fastboot drivers plus android sdk drivers)
The #2 drivers let ADB see it when ICS is running, #3 (and probably #2 too) are needed while in fastboot. To get #3 installed, I had to go to device manager in Win7, hit update driver (next to the error exclamation mark device), and direct to these files.
That is all <whew!>
Glad you got it sorted out buddy, I was in exact same boat, years of Nexus One fastboot and adb use, but still had problems!
I am really struggling to install ADB drivers (for using within ICS). The GNex is in developer debug mode. When I plug in, Device Manager shows the Portable Device, but no other devices are shown. So in this case, i have nothing to right-click to manually install the drivers. There is nothing under Android, or adb, or anything like that. Hope someone can advise...
I got it to appear by changing to PTP mode in the USB Computer COnnection on the phone!! Success.
Windows 7N USB driver issues
First post on this forum, so please bear with me.
I struggled for a few weeks trying to connect my new Samsung Galaxy Nexus (Rogers) to a 32-bit Windows 7 Ultimate N machine. The system wouldn't accept the drivers from Samsung - failed to recognize, driver software not successfully installed, etc. Tried all variety of proposed fixes, manually selecting the driver (have disk), downloading SDKs and ADB drivers.
Finally fixed it based on a very old suggestion from several years ago from an HTC user. The USB driver wasn't recognized in the absence of Windows Media Player being installed on the machine (a quirk of Ultimate N). Found the Patch from MS for WMP for 7 Ultimate N and the system immediately recognized and installed the Samsung driver and thus the Nexus is now connected.
Download my toolkit (ROM-Less), it will assist you in that manner!
It has easy instructions, and it will do most of the work itselff!
---------- Post added at 10:53 PM ---------- Previous post was at 10:49 PM ----------
AMoosa said:
I am really struggling to install ADB drivers (for using within ICS). The GNex is in developer debug mode. When I plug in, Device Manager shows the Portable Device, but no other devices are shown. So in this case, i have nothing to right-click to manually install the drivers. There is nothing under Android, or adb, or anything like that. Hope someone can advise...
I got it to appear by changing to PTP mode in the USB Computer COnnection on the phone!! Success.
Click to expand...
Click to collapse
Check this, it has all neccesary info/drivers for your device, including fastboot drivers!
Beatsleigher root helper (My toolkit) check it out
[FIXED]
For some reason Toolkit didnt work for me and i used this method to unlock bootloaders and root it.
http://forum.xda-developers.com/showthread.php?t=1362957
Also installed CWM recovery
------------------------------------------------------------------------
I installed my drivers and 1st time when I connected my phone in adb toolkit recognised it and showed his id. Next time when I connected it in adb it didnt recognise it in toolkit but windows recognise my phone and i can access it.
I've rebooted my pc every time and reinstalled couple of drivers:
-Naked samsung drivers
-Pda drivers
-Samsung_USB_Driver_for_Moblie_Phones_v1_4_6_0
Nothing worked.
1st time I used Samsung_USB_Driver_for_Moblie_Phones_v1_4_6_0 and i tried again and nothing.
I am on Windows 7 64bit version.
If anyone knows how to solve this please share the idea.
sukyman said:
I installed my drivers and 1st time when I connected my phone in adb toolkit recognised it and showed his id. Next time when I connected it in adb it didnt recognise it in toolkit but windows recognise my phone and i can access it.
I've rebooted my pc every time and reinstalled couple of drivers:
-Naked samsung drivers
-Pda drivers
-Samsung_USB_Driver_for_Moblie_Phones_v1_4_6_0
Nothing worked.
1st time I used Samsung_USB_Driver_for_Moblie_Phones_v1_4_6_0 and i tried again and nothing.
I am on Windows 7 64bit version.
If anyone knows how to solve this please share the idea.
Click to expand...
Click to collapse
I was facing lot of driver issues when connecting my GNex for the first time to the laptop on WinXP. Installing the drivers through the GNex Toolkit also did not work for me.
Finally what worked for me was, installing the latest version of Android SDK with the additional package of Google USB drivers, and then manually selecting the drivers after connecting my phone instead of asking Windows to look for drivers automatically.
I had trouble when first connecting my GNex too. However, these drivers worked for me (plus work with many many other android devices):
http://forum.xda-developers.com/showthread.php?t=1379875
If you have several android devices you'll find that you don't have to install multiple drivers for adb, fastboot, etc. for each of the devices.
Taken from post#3 of the ToolKit thread:
Note 1: If the driver doesnt install automatically then double click on the Android 1.0 item, then click on the driver tab and select 'update driver'. Select 'browse my computer' and then 'Let me pick from a list'. If no items appear in the list then untick 'Show compatible hardware' and find the Android adb driver or Samsung adb driver.
Try that as they may be on your pc and just not installing.
Mark.
Got them working now but i have problem when rooting, using GNex toolkit 5.6
It boots into android, i set usb debugging but when the phone is suppose to boot back to fastboot it gives error device not connected.
Hi all,
I just bought a Galaxy Nexus and I'm having problems with the ADB port: my Lenovo w520 laptop running win7x64 simply does not detect the ADB device in device manager. I tried connecting the phone to my wife's laptop (HP running win7x64) and the ADB device is detected so it is not a problem of the phone or the cable. On my pc I only get the Galaxy Nexus MTP device and that is all.
It is not a matter of driver, there is simply no device detected hence it is not possible to send ADB command.
I do not know if it is related, but samsung USB mobile driver fails during installation without giving a valid reason.
anyone having similar problem ?
thanks
cheerts
So... how do you know its not a driver issue? Sounds like one to me. Have you tried manually installing other drivers?
Well, what is actually strange is that:
1) if I connect the phone to my wife laptop with USB debugging ON and no driver installed (it's HER pc, I cannot install my stuff), a composite device with two devices (MTP and ADB) is detected.
2) in fastboot mode, my laptop detects the ADB port and install proper drivers; using Galaxy Nexus toolkit, I can successfully list my device.
When the phone is fully booted, my laptop simply see only the MTP device. If it were just a matter of driver i would simply get an Unknown device in win7 device manager...
thanks
cheers
enryfox said:
Well, what is actually strange is that:
1) if I connect the phone to my wife laptop with USB debugging ON and no driver installed (it's HER pc, I cannot install my stuff), a composite device with two devices (MTP and ADB) is detected.
2) in fastboot mode, my laptop detects the ADB port and install proper drivers; using Galaxy Nexus toolkit, I can successfully list my device.
When the phone is fully booted, my laptop simply see only the MTP device. If it were just a matter of driver i would simply get an Unknown device in win7 device manager...
thanks
cheers
Click to expand...
Click to collapse
Eh. Fastboot is all you need. :thumbup:
Sent from my Galaxy Nexus using XDA
After several attempts (including installing win7 x64 in a virtual machine ...) I finally solved my problem: it was indeed a driver issue, my win7 did not automatically searched for proper driver (and the Samsung driver is available on-line in windows update). I forced a driver update for the MTP device so that windows downloaded Samsung driver and now both the phone and ADB port are detected and working. It is still a mystery why the driver provided by various tool-kit failed to install, but nonetheless the GNex is now fully set-up.
Actually the solution is so dumb that I feel a bit ashamed of myself...
thank
bye
hello guys, just bought that amazing watch today i have an issue. How can i connect it to my pc ? I plug in the usb, while sm3 is off. Win7 start to install and at the end it fails because of the drivers. So my pc doesn't recognise it. I can only see the "empty" E:/ Disk. Any suggestion ?
edit: unistalled the "watch" and then plugged in again and drivers get istalled. Now i have a "sony file-cd usb gadget" . help me pls
edit: wrong section :/ sorry
I have exactly the same problem.
i installed the Google USB Driver from theAndroid SDK Manager and also installed the Sony PC Companion. But the Smartwatch 3 still shows in the device manager under "other devices" without installed driver.
The only way i could connect to it is using ADB over Bluetooth which is really slow.
Anyone any idea?
i used these adb drivers http://download.clockworkmod.com/test/UniversalAdbDriverSetup6.msi
after installation, i went to device manager, update drivers, search pc for drivers, choose from a list of...., and then i selscted adb testing interface version 3.12.0.0
i had to skip the warnin popup, but adb is working fine
Thank you a lot.
i could not find any "adb testing interface" so i installed "Google Nexus 7 ADB Interface" from the list and so far it seems to work with that too.
Not sure why you have such a testing interface driver.
Did this HERE and no driver problem for me.
Drivers can be found in this folder : Program Files (x86)/Sony/Sony PC Companion/Drivers/
The Driver used in the bootloader is a different one. I have no issue there.
But it seems there is no actual ADB Driver used when the device is in normal operation mode for debugging apps or pushing apps directly over ADB on to the device.
Hi friends,
I recently installed a fresh windows 10 latest build (16299).. I have 64 bit windows 10.. The problem is i cant install moto z play drivers on this build. I was able to install drivers on the previous build of windows 10 but on this build i failed... Motorola Device Manager is stuck at step 2 (Installing USB drivers)... I waited for hours but it is stuck... I tried closing and opening the app but still no luck... Tried restarting and then installing drivers but still no luck.. Everything else is installed perfectly including adb but i am unable to install moto drivers.... Can someone help... Without drivers i wont be able to even flash my device
Anyone??? I need to flash my device...please help
1) Install drivers from this topic https://forum.xda-developers.com/showthread.php?t=2588979
2) After that you will be able to manually assign Android ADB Interface driver to your phone in Device Manager
freeman_g said:
1) Install drivers from this topic https://forum.xda-developers.com/showthread.php?t=2588979
2) After that you will be able to manually assign Android ADB Interface driver to your phone in Device Manager
Click to expand...
Click to collapse
I already have adb installed and it worls fine...its just i am unable to install moto drivers on my pc... I even tried after disabling driver signature bull**** that was introduced in windows...
Those pack also contains proper ADB driver. You do not need separate Moto drivers, original ADB driver from Google will work fine too.
After installation connect your phone in fastboot mode to PC and go to Device Manger. Then update the driver of your phone in manual mode (when you have to choose from the drivers already installed on your PC) and choose Android ADB driver from the list.