LG G3 searching WiFi but won't connecting. - G3 Q&A, Help & Troubleshooting

Hello, I have non-typical problem with my LG G3, it sreachs WiFi networks, but when I tap on my WiFi networks it show on one second "Connecting" and... nothing. I tried with a lot of wifi networks in my work, home etc. I've tried hard reset and Android upgrade to 6.0 30C, nothing helped me. I've search on the Internet and didn't found simillar problems. Any ideas?
Regards!

Hey buddy I found myself in the same boat as you and a few of these other peeps in the Q&A with the issues concerning WiFi. The 3xception is that mine occured after frolicking mindlessly in Hidden Menu land galavanting about with no concern as to what the hell I was changing, bolstered by an almost psychotic illusion that what I was doing would somehow enhance my connectivity with the possible addition of a kinetic-energy based super power.
Seriously though - I did eventually retrace and undo almost all of what I originally did (mostly just checked or unchecked the many boxes in the IMS and related settings) and got my gps, bluetooth, and wifi to turn on and scan. However - I had already lost (never had) IMEI, (my phone was a purchase off Amazon that was bojangled from the get go - perma-locked and such) So I used the CRC MID wizard and rewrote my addresses and IMEI. It was there I noticed my country stuff was @ open_eu and I am in America - dont know if that really matters but didnt really look into it because I was on the other mission of righting my wrongs. Somewhere in all of this my adb.boot deleted (I noticed the toast when trying to enter modem protocol settings and one or two others) and so I believe that may have been why I was not able to boot into twrp but to boot up regularly(?) temporarily at least because after putting it down and walking away to ponder on it earlier this morning I used flashify to try and restore a nand of a stock debloated 20f rom, and well, we have seen where this was going all along....
Fastboot mode started is my lone response from my D850 save for the ability to enter hardware control mode (where it does show the IMEI took hold the CRC wizard wrote, so I assume the WiFi address and BT addy inscribed with it would be fairly legit. I took that leap thinking maybe they should all be established at the same time. I know many of you are shaking your heads and yeah I get it, I knew not to touch shiz so in essence I knew what I was doing - jackin it up...)
I know that was a clusterbomb there but having taken a little while to reflect on how insanely stupid all of the stuff I did was, especially so very extremely and freaking ignorantly at the same time all without making my usual notes, I am now ready to climb back on that horse and resurrect her from fastboot mode. Which looks pretty damn right up a dark alley as far as how much I know to do... Heres to XDA as that lone streetlight at the end of that dark alley for all the morons like me!
So what I was wondering is are you O.G. wifi mac and bt addy intact o are you having the issues I and a few others are where it was showing 02:00:000:00 or whatev? And just an advisement (which we all usually mostly follow, right? ) to record and back up your original settings/files/etc. and do whatever it is one at a time - I am cometely anxious and beast mode on this problem so maybe if we all friggin collaborate and get some documenting what does and doesnt work a decent and legit fix can be found and a guide written....
And speaking of after this I am making a guide to the acronyms you come across in Hidden Menu land... I will post any help I come across and hopefully a few people get energized and amped up to tackle this gnarly beast. Lets go XDA troops!!!

Filsle said:
Hello, I have non-typical problem with my LG G3, it sreachs WiFi networks, but when I tap on my WiFi networks it show on one second "Connecting" and... nothing. I tried with a lot of wifi networks in my work, home etc. I've tried hard reset and Android upgrade to 6.0 30C, nothing helped me. I've search on the Internet and didn't found simillar problems. Any ideas?
Regards!
Click to expand...
Click to collapse
Hello ,
I was in the same situation after I repaired QCN and nv items on my LG D855.
My phone was was showingconnecting than showing saved, secured.
I just changed my WIFI MAC adress thanks to new SVC menu in android Marshmallow ^^. (yes it is not possible on 4.4.2 and 5.0)
so install android Marshmallow than follow these steps:
1- on dial pad : *#546368#*855# (855 is for D855 and so)
2- find and click SCV Menu
3-click on CRCWIZARD Test
4-click the tab Auto MID
5- uncheck IMEI in MID settings
6- click generate to generate your new MAC's
7- click MID write
8-Click Refresh to be sure that you changed MAC adress
9-Rebbot phone to take effect!

majorak said:
Hello ,
I was in the same situation after I repaired QCN and nv items on my LG D855.
My phone was was showingconnecting than showing saved, secured.
I just changed my WIFI MAC adress thanks to new SVC menu in android Marshmallow ^^. (yes it is not possible on 4.4.2 and 5.0)
so install android Marshmallow than follow these steps:
1- on dial pad : *#546368#*855# (855 is for D855 and so)
2- find and click SCV Menu
3-click on CRCWIZARD Test
4-click the tab Auto MID
5- uncheck IMEI in MID settings
6- click generate to generate your new MAC's
7- click MID write
8-Click Refresh to be sure that you changed MAC adress
9-Rebbot phone to take effect!
Click to expand...
Click to collapse
I'm stuck on step 5
There is no option to check and uncheck the imei. I juts can see my imei \wifi\BT number

tamir87 said:
I'm stuck on step 5
There is no option to check and uncheck the imei. I juts can see my imei \wifi\BT number
Click to expand...
Click to collapse
For me there is no rewrite button too - I have LG V10 android 7

Does
tamir87 said:
I'm stuck on step 5
There is no option to check and uncheck the imei. I juts can see my imei \wifi\BT number
Click to expand...
Click to collapse
Does anybody actually have a solution to this? I also cannot see any option to check/uncheck or generate

Related

[Q] 3G connection with ProjectAndroid2.2Froyo.112210

Hi,
I am new and just installed Android ProjectAndroid2.2Froyo.112210 on my HTC Touch Pro 2 phone. Once I had the 3G connection with the Dutch KPN working but after a reboot of the phone, I can not manage to get it working again. Wifi and BT are ok except the 3G connection.
Did a 'to default reset' and tried several APN setting but none of them turn the 3G connection back to live.
Does anyone have a solution?
Thanks in advance,
Rick.
Does the cell radio function? In other words, can you make/receive calls/texts?
If yes, then the APN settings are a good thing to look at - also, do you have a 3g icon with up/down arrows next to the signal strength meter?
One other good question to ask - does your provider require a proxy to access the 'net?
Yes, I can call and recieve calls. Also sms messages are working fine.
The only thing which is missing is the G3 data connection icon and actually the datalink.
No, the provider does not need a proxy setting. As I wrote in my start, I had it working good but just after a reboot without any changes on the APN parameters, it didnt come back again.
Thanks for your reply Arrrghhh!
slimmehenkie said:
Yes, I can call and recieve calls. Also sms messages are working fine.
The only thing which is missing is the G3 data connection icon and actually the datalink.
No, the provider does not need a proxy setting. As I wrote in my start, I had it working good but just after a reboot without any changes on the APN parameters, it didnt come back again.
Thanks for your reply Arrrghhh!
Click to expand...
Click to collapse
Hrm. May want to try with a new/fresh data.img. If you rename your existing data.img, a new one will be created during boot. See if it helps... unfortunately deleting that file has fixed so many odd issues, it's not even remotely funny.
Okay, I will give it a go when comming back from my trip next week.
I did remove all files a couple of times and re-installing the Android software but maybe not all data has been removed? At least it did not solve the problem.
By the way, could it be caused by having the system on the SD card rather than in the phone memory? And could it be related to the type of phone selected during boot time? I am using the HTC Touch Pro 2 and not selecting the Tilt-2 but the ?210 (forgot the name and the phone is off) due to the fact that the keyboard is wrong with the tilt-2 option.
slimmehenkie said:
Okay, I will give it a go when comming back from my trip next week.
I did remove all files a couple of times and re-installing the Android software but maybe not all data has been removed? At least it did not solve the problem.
By the way, could it be caused by having the system on the SD card rather than in the phone memory? And could it be related to the type of phone selected during boot time? I am using the HTC Touch Pro 2 and not selecting the Tilt-2 but the ?210 (forgot the name and the phone is off) due to the fact that the keyboard is wrong with the tilt-2 option.
Click to expand...
Click to collapse
Ehm, you can wipe your SD card all the times you want, but this won't solve anything if the APN is wrong or if your carrier requires user/pass, proxy or whatever else.
So first go check you actual APN configuration in WinMo, get a paper, copy it down piece by piece, then get back to Xdandroid and modify/create a new one, checking all the settings are properly set.
Have a nice trip.
@Wind,
your right but again, it has been working with a certain set of parameters but just after a reboot without any change on APN, the phone did not want to reconnect on 3G.
Thanks for your wishes. Will get back when I return.
do not use this version modules-2.6.27.46-01232-gb7033df.tar.gz , zImage-2.6.27.46-01232-gb7033df, change it.
@muziling,
I did update the phone with your advised release and re-started the phone again. No result. Due to low battery the phone went down and had to re-charge. When the battery was full again, turned on the phone and guess what, I had a 3G icon.
Just to be sure that it was not a lucky shot (but I was thinking it) I decided to reboot the phone again and ships.... the 3G icon did not show up again.
No change inwhatever parameter was made during the reboot session. This means that the 3G performance is intermittend and depeding on a certain condition which I do not know how to find. Any suggestions?
Thanks in advance.
I have a similar problem. After a fresh install, the 3G connection works exactly the first time, I boot into android. After a reboot, the 3G connection mostly does not work. I cannot figure out, which conditions have to be met, to get 3G working. Its just pure luck to me.
btw, I have a german rhodium.
try this version, it works perfect on my rhod400
neopeek.com/forum/Android-ROMs/1553-Barebone-CyanogenMod61-Minimum-System-22-11-2010

Vanishing IMEI/MEID on VZW GNex

From time to time I cannot connect to mobile data, even though 3G shows above the signal triangle. A few solutions that randomly work are to toggle the radio from LTE/CDMA to CDMA only (and then back to LTE), toggle in and out of airplane mode, and the last resort of rebooting. The only method that works consistently is rebooting. Happened again today, and I noticed a few oddities on the phone status page in settings:
- Both IMEI and MEID were shown as "unknown"
- Phone number was visible
- Mobile status shows "connected"
- IP addresses (both IPV4/IPV6) were assigned
Prior to this (for the past 108 or so hours of uptime) all was fine, but in the midst of playing Words with Friends the signal bars grayed out and would not resume the connection. After several trials of my "solutions", I had to reboot. Sure enough, after reboot all was well again, and the IMEI and MEID were again displayed correctly in the phone status page.
As my signature shows, I am stock unrooted. While I have seen that a few individuals somehow wiped out their efs partition during a flash, that doesn't seem to be the case here since all of my info came back upon reboot.
Thoughts?
Sent from my Xoom using xda premium
Since you're completely stock, try exchanging for a referb with Verizon?
Will the next nexus have a longer screen?
I found that reseating the SIM card fixed my triangle (Roaming) issue. May be worth a shot.
I had this same issue. Sudden loss of service. IMEI: unknwon, Phone Number: unknown, etc...
I brought it to VZW to try a new sim. No go. They told be to call Samsung.
They verified that I actually had tried the idiot proof stuff, and confirmed its dead. Still under 1 year manufacturer's warranty. They're paying to mail it back and say they'll repair it, and send it back to me. Here's hoping they don't care that I've been flashing it like crazy for the past 5 months.
myriad46 said:
I had this same issue. Sudden loss of service. IMEI: unknwon, Phone Number: unknown, etc...
I brought it to VZW to try a new sim. No go. They told be to call Samsung.
They verified that I actually had tried the idiot proof stuff, and confirmed its dead. Still under 1 year manufacturer's warranty. They're paying to mail it back and say they'll repair it, and send it back to me. Here's hoping they don't care that I've been flashing it like crazy for the past 5 months.
Click to expand...
Click to collapse
Hard to say our problems are related. I am stock unrooted, and as stated in the OP only my IMEI and MEID were unknown. Also came back on reboot. Chances are you killed your efs partition during one of your flashing sessions.
Sent from my Xoom using xda premium
In the future, if anyones IMEI/MEID is perm-disabled due to whatever reason... my thread found here(Post #2) has info on repairing the Gnex MEID/ESN/IMEI.
This has happened to me recently. I've been flashing *safely* since the G1. Since Jelly Bean flasshing removed my network access. I went through a warranty repair and upon unlocking same problem. If my MEID or ESN is corrupt, I have not figured out how to repair it using Prime's instructions. That's a new world to me.
autoprime said:
In the future, if anyones IMEI/MEID is perm-disabled due to whatever reason... my thread found here(Post #2) has info on repairing the Gnex MEID/ESN/IMEI.
Click to expand...
Click to collapse
Autoprime, I did find that thread in my frenzied search to fix my phone. I downloaded the tool in post #2 but was confused how to get my phone connected as a COM port, or converserly, it would not recognize it when I changed the setting to USB. Do I need to put my phone in a particular mode, before that utility will recognize it? Do I have to go through the setup in Post #1 (ETS) prior to using the IMIE writing utility? Thanks.
myriad46 said:
Autoprime, I did find that thread in my frenzied search to fix my phone. I downloaded the tool in post #2 but was confused how to get my phone connected as a COM port, or converserly, it would not recognize it when I changed the setting to USB. Do I need to put my phone in a particular mode, before that utility will recognize it? Do I have to go through the setup in Post #1 (ETS) prior to using the IMIE writing utility? Thanks.
Click to expand...
Click to collapse
as u said in last sentence... you will have to go thru post 1 steps(only some of them!) to connect to meid tool.
since you guys are on a verizon gnex.. you would need to flash a Sprint rom in order to set the phone into diag mode. i believe most vzw roms have these options left out.. at least stock did.
2 things are required for a successful Ets Diag connection...
1. setting diag mode... this is the *#*#DIAG#*#* menu
2. setting Ets Channel mode to "USB" . This is done in the *#*#DATA#*#* > More > Ets Channel settings.
It MAY be possible to stick with the Verizon rom and use the Sprint Diagnostics App: http://forum.xda-developers.com/showthread.php?t=1774503
not sure if it works with VZW roms tho(im a sprint user).
The VIA Ets tool is the equivalent to messing with QPST/QXDM on Qualcomm phones. Just like Qualcomm phones have to be put into diag mode first before connecting to QPST, the Galaxy Nexus has to be set in the right mode as well.
autoprime said:
as u said in last sentence... you will have to go thru post 1 steps(only some of them!) to connect to meid tool.
since you guys are on a verizon gnex.. you would need to flash a Sprint rom in order to set the phone into diag mode. i believe most vzw roms have these options left out.. at least stock did.
2 things are required for a successful Ets Diag connection...
1. setting diag mode... this is the *#*#DIAG#*#* menu
2. setting Ets Channel mode to "USB" . This is done in the *#*#DATA#*#* > More > Ets Channel settings.
It MAY be possible to stick with the Verizon rom and use the Sprint Diagnostics App: http://forum.xda-developers.com/showthread.php?t=1774503
not sure if it works with VZW roms tho(im a sprint user).
The VIA Ets tool is the equivalent to messing with QPST/QXDM on Qualcomm phones. Just like Qualcomm phones have to be put into diag mode first before connecting to QPST, the Galaxy Nexus has to be set in the right mode as well.
Click to expand...
Click to collapse
Thanks very much for laying that out. Is this something that "just happens"? It seems like (over several months) I flashed 50 - 60 times, radio a few times, changed from CWM to TWRP with no problems and then in the middle of the day, I just lose signal.
Could it be a hardware issue? I read somewhere that a modem in a phone got fried and caused the same thing.
myriad46 said:
Thanks very much for laying that out. Is this something that "just happens"? It seems like (over several months) I flashed 50 - 60 times, radio a few times, changed from CWM to TWRP with no problems and then in the middle of the day, I just lose signal.
Could it be a hardware issue? I read somewhere that a modem in a phone got fried and caused the same thing.
Click to expand...
Click to collapse
i mean.. in my experience it comes with messing with the phone.. the EFS etc. could be from a bad flash.. but yes it could be hardware... or theres even a small chance its just random. youd have to look at the factors leading up to the issue for the best guess.
overall tho.. outside of messing with the efs/NV.. its kinda weird for it just just to happen.. id consider that very rare.
UPDATE: sent back to Samsung. They replace the main board under warranty. Works like a charm now.
Sent from my Galaxy Nexus using Tapatalk 2
Missing MEID/IMEI no service but internet is working.
I've been searching high and low and have came across various forums that are related to my problem but I'm still not sure if its the problem I have
or what to do exactly. I have a Samsung Galaxy Nexus with VZW, rooted, running a custom ROM (CM10), Android version 4.1.2 JZO54K. My
service got disconnected and when I paid to get it reconnected I get an empty signal triangle and sometimes an R above it (roaming). My internet
works oddly enough but I'm unable to receive/make calls or text messages. My status reflects; Network: searching for service; Service state: out of
service; Mobile network state: disconnected; MEID: unknown; IMEI: unknown. Before my phone was disconnected it was working fine, please
help!!!
If you did some backups time to time and if you have backup of data folder, inside of data folder you should have folder radio. Inside the radio folder should have data.bin file and data.md5. In my case they was original data files of my phone and after their copy to factory folder ot restore my IMEI.
I hope that helps.
Sent from my Galaxy Nexus using xda app-developers app
Yeah unfortunately I never did... any other suggestions??? Or am I at a lost???
Sent from my Galaxy Nexus using xda app-developers app

NO Service Ha AAA keys from 466 1192

Someone that can Help with Ha & AAA Keys. I have Read & Read & Tried Several Different Ways about & failed Time & Time Again. I Have NV Files, & software. Please PM Me if You Would Like to help.
Giterdun said:
Someone that can Help with Ha & AAA Keys. I have Read & Read & Tried Several Different Ways about & failed Time & Time Again. I Have NV Files, & software. Please PM Me if You Would Like to help.
Click to expand...
Click to collapse
I found somethings on it,not sure if it will help you or not....
http://forum.xda-developers.com/showthread.php?t=1601869
http://forum.ppcgeeks.com/2019456-post17.html
ha aaa
Diablo67 said:
I found somethings on it,not sure if it will help you or not....
http://forum.xda-developers.com/showthread.php?t=1601869
http://forum.ppcgeeks.com/2019456-post17.html
Click to expand...
Click to collapse
Yes I have Read Those several Times. But its a No Go. (Samsung Replenish & Htc Evo ) Are The Phones Im Working With.
I Have All The NV Files But When I enter them Into The Phone It Does Not Work.
I Had The Phone On With A HTC Touch Pro 1 but just activated it before I knew about getting the ha aaa first. So I only Had 1X. But When I Turn the Pro Back On I Couldnt get the Evo To Work Again. So I Switched To the Samsung But it never has Activated the Evo Since.
Im Wordering if I should Go back to stock RUU Then Put in all The Ha aaa's The Try The OTA Again.
Giterdun said:
Yes I have Read Those several Times. But its a No Go. (Samsung Replenish & Htc Evo ) Are The Phones Im Working With.
I Have All The NV Files But When I enter them Into The Phone It Does Not Work.
I Had The Phone On With A HTC Touch Pro 1 but just activated it before I knew about getting the ha aaa first. So I only Had 1X. But When I Turn the Pro Back On I Couldnt get the Evo To Work Again. So I Switched To the Samsung But it never has Activated the Evo Since.
Im Wordering if I should Go back to stock RUU Then Put in all The Ha aaa's The Try The OTA Again.
Click to expand...
Click to collapse
I know this thread is months old, but did you figure this out or do you still need help with this?
some service from Ha AAA 466 1192
budgreen24 said:
I know this thread is months old, but did you figure this out or do you still need help with this?
Click to expand...
Click to collapse
Well I Did manage to get my evo working, it still has some bugs... For some reason the phone goes to a sleep mode or something and when someone calls me it goes straight to voice mail, also I don't receive my text messages sometimes for 20 to 30 mins or hours after someone sends them. i can make a call & Then it seems to work right. I have had a few times where when I tried calling out it didn't seem to work either, I think it would go to there voice mail or say this call could not be completed or something. ( It doesn't do that very often)..
It Seems Like It has this problem of losing the network after I switch towers from one town to another or when I plug it in to a computer or charger but not for sure.
My internet seems to work always weather 3G or wifi though 3G sometimes is really slow untill I reboot my phone & seems to pick up for a while.
Thanks
Giterdun
Giterdun said:
Well I Did manage to get my evo working, it still has some bugs... For some reason the phone goes to a sleep mode or something and when someone calls me it goes straight to voice mail, also I don't receive my text messages sometimes for 20 to 30 mins or hours after someone sends them. i can make a call & Then it seems to work right. I have had a few times where when I tried calling out it didn't seem to work either, I think it would go to there voice mail or say this call could not be completed or something. ( It doesn't do that very often)..
It Seems Like It has this problem of losing the network after I switch towers from one town to another or when I plug it in to a computer or charger but not for sure.
My internet seems to work always weather 3G or wifi though 3G sometimes is really slow untill I reboot my phone & seems to pick up for a while.
Thanks
Giterdun
Click to expand...
Click to collapse
Sounds like you might need to update your PRL. (either automatically or manually). Have you done that yet? You should update your data profile also while you're at it.
pm me if you need more
budgreen24 said:
Sounds like you might need to update your PRL. (either automatically or manually). Have you done that yet? You should update your data profile also while you're at it.
pm me if you need more
Click to expand...
Click to collapse
I having a similar problem with my phone, my phone does show 3g icon however I m only getting 130kbps. I been reading all over the internet until I found this post that shows that AAA key is phone specific and if not configure phone get stuck on 1x. I think that I might have changed this value by mistake, not sure, question is where can I find out the correct value for my Evo? Phone is flashed to carrrier in Dominican Republic, voice works fine. Carrier will not provide much help. Also if any one can advice of correct data configuration for this phone, what type of credentials I need, just to double check data configuration, as I stated carrier customer service will not provide much help. I am using DFS tool to update PRL, etc. Really appreciate any help on this!!!!
ChinoRD said:
I having a similar problem with my phone, my phone does show 3g icon however I m only getting 130kbps. I been reading all over the internet until I found this post that shows that AAA key is phone specific and if not configure phone get stuck on 1x. I think that I might have changed this value by mistake, not sure, question is where can I find out the correct value for my Evo? Phone is flashed to carrrier in Dominican Republic, voice works fine. Carrier will not provide much help. Also if any one can advice of correct data configuration for this phone, what type of credentials I need, just to double check data configuration, as I stated carrier customer service will not provide much help. I am using DFS tool to update PRL, etc. Really appreciate any help on this!!!!
Click to expand...
Click to collapse
Well one solution would be to swap handsets on your account with your carrier to a phone that you'll be able to read all the required info from. Then read and save. Then write the correct info onto your Evo and switch handsets back. The downside to this is it requires you to have another phone... But it will work.

[Q] How to connect to hidden WiFi?

Hello xda community!
I have a strange and serious problem: I can't connect to hidden WiFi's.
I'm with a LG G3 D855 10H (no newer versions available).
At work we use a hidden WiFi without password but with Juniper VPN.
When I type in the network name and save it, it tries one time to connect, then my LG G3 shows "not in range". After a few seconds, the WiFi is on the top again with a very good signal.
When I try to connect again, it shows "not in range" again and so on.
I tried it at home and created a hidden network and it was reproducible.
Anyone else has problem with this?
Many thanks in advance for your help!
Best regards,
Jake
Jake2kOne said:
Hello xda community!
I have a strange and serious problem: I can't connect to hidden WiFi's.
I'm with a LG G3 D855 10H (no newer versions available).
At work we use a hidden WiFi without password but with Juniper VPN.
When I type in the network name and save it, it tries one time to connect, then my LG G3 shows "not in range". After a few seconds, the WiFi is on the top again with a very good signal.
When I try to connect again, it shows "not in range" again and so on.
I tried it at home and created a hidden network and it was reproducible.
Anyone else has problem with this?
Many thanks in advance for your help!
Best regards,
Jake
Click to expand...
Click to collapse
I've got the same problem.
My problem was resolved
rayan96 said:
I've got the same problem.
My problem was resolved
Click to expand...
Click to collapse
Now that is what you call a 'special' post!
Would you care to explain how it was resolved for the people that have the problem.
My problem still exists, but isn't urgent anymore.
I found out, Android itself have problems (or restrictions?) to hidden WiFi networks.
I also found an app names HiddenSSID Enabler, but it seems it didn't work for me (or G3?).
If someone has a solution it still would be very helpful fo rme and the rest of the community.
// Jake
I have logs posted in my first post, WIFI DESTROYED TWICE or there abouts.
I've had to resort to DATA and its killing me haha i think i am getting close to fixing it, well i think i may be closer than you two and can one of you kindly take the lead as im reinstalling windows and i haven't gamed in 6 days :|
/system/etc/wifi/WCNSS_qcomcfg.ini
then the problem is complex but i am sure it is something to do with gEnableApProt=1
Offshoot fix, reinstall using googled imei number that doesn't have a flag or some how fix the flag <READ A FEW DAYS BACK>
I think actually the program that stuffed me was Airmon by maxters. It asked me if i was pro and of course, i said yes. Who would simply click no? I know a ninj wouldn't click no. I think there is a manual reinstall to link to it again i find the modem in its own partition having a chill, most likely trojan/backdoor and pwning everything around me.. I had three encrypted vpn backdoors and escalated accounts on my computer I paid the 5$ for the binarys, i think i paid 5$ for the back doors.
Not to sell Airmon out though.. Rooting our phones and accessing countless forums and websites really does leave us rather "xposed" some other cuplrits may be dsploit, ROM manager, linux Deploy/kali, Pamn IP scanner, system app remover pro, busybox pro's (Stephen/JRummy) or CMinstall/accessing the forums and trying to install cynagenmod / twrp recovery. I'm probably going to go with..... Airmon/Linuxdeploy or uninstalltool. But may have just been my IP logged and i hit a booby trap script along the way.
You guys done anything of the sort?
/Thread killller
Neither I understand what you are talking about, nor am I (as not native english speaker) good at "sentence guessing".
I have a rooted phone - of course.
But I'm pretty sure my WiFi is not destroyed...

Connects to Guest Networks

Hello,
I have a Samsung Galaxy Note 2, SGH-M317i (Bell Mobility) and recently installed Cyanogenmod 12.1 (Lollipop 5.1.1). All is running well, the device actually seems to be running much faster...probably due to the lack of bloatware that originally came with it. Sure, I miss some of the "cool" features that the manufacturer had added (ie. hand swipe for screen capture), but overall I am extremely happy with the decision to flash the ROM. Although it does self-identify as a SGH-N7105 now. (About Phone > Device model)
Anyway, I have noticed that when I have my guest networks enabled on my home router (an ASUS RT-N66U running the latest Merlin firmware), my phone insists on connecting to the Guest networks (a2.4 and 5 GHz) instead of my full, "regular" network (hidden SSID, but a "Saved" network in the phone). Even if I go into the WiFi settings and tell the phone to forget those entries, it will still try to connect...even going so far as to say "connected" even though I know it does not have the proper credentials. I have no idea what is causing this as the problem was not present on the stock 4.4.2 KitKat that I had previously.
Sure, I could give it the credentials for those guest networks (all are WPA-Personal protected) but I have restricted those from accessing the intranet as they are primarily for guests who come by, so that is not really a viable option.
Does anyone have any suggestions? It seems strange that it attempts to connect and save these networks, so technically, I shouldn't have to do anything to keep the phone from connecting. However, since it insists, I had thought that Android would have a native (not requiring an app) method of blacklisting these networks. I have looked at apps such as WiFi Ruler, but again would've thought that there is a manual way of doing this. (I don't know if this is obvious by virtue of the fact that I am running a custom ROM, but the phone is rooted.)
Thanks!
used this code and off your wifi power saving mode and try *#0011# select wifi..u may need need press the botom left button to select wifi
Very odd. It seems that since installing CM12.1, my device no longer accepts or recognizes USSD codes. I guess I hadn't noticed since I had rooted and unlocked it prior to flashing Cyanogenmod over the stock ROM. I did some reading and I found that there is a patch to enable those codes (and SMS) on CDMA models of the Note 2. However, mine is LTE and does SMS, MMS, and it uses LTE without issue.
Here is a link to that page:
http://forum.cyanogenmod.org/topic/112400-solution-to-sms-and-ussd-code-on-cm121-cm12-cm11-cm10/
Is this something anyone else has experienced? Should I follow the instructions on that page and install the patch?
Again, my phone is a Samsung Galaxy Note 2, SGH-i317M but since the installation of CM12.1 the About Phone > Device model reports it as being a GT-N7105 with a Baseband Version I317MVLUDNH2.
I'd really like to try the solution to my WiFi problem, so if anyone else has had experience with the USSD codes not working please let me know if there is a solution.
Thanks!
To update my last post:
Some USSD codes do work, I watched the pop ups more closely this time and there is one before the "...invalid MMI code" that says "USSD code running". The main one that find interesting no longer works is the one I had used to unlock my phone *#197328640#. I had figured that it would not have disappeared simply by installing Cyanogenmod. Further, I also followed that thread I had posted the link to a little further, and I'm not comfortable flashing the "patch" it leads to as I cannot confirm it's original source and it does sound like it may be another full ROM.

Categories

Resources