Develop Bugs

So you cant root OOS 4.0?

I have searched and i havent find a solution
I updated, im on OOS 4.0 with F2FS everything smooth and nice.
After setting up i try to flash twrp and once i boot into it it ask me for a password wich isnt the one i put.
I saw some people are in the same problem as i but i didnt see anything taht could help me at all.
I tried with the modified twrp, same thing,
I just want to get it root, any solutions?
Thanks

Well, I managed to get OOS4 with root and data partition as F2FS.
I followed this procedure and worked out just great ! https://forums.oneplus.net/threads/...g-dm-verity-error.484019/page-2#post-15558781
Not sure if you can skip some of the steps but right now I have OOS4, with root and TWRP (modified) working and capable of decrypting !

You are encrypted.. Decrypt flash Oos 4.0 directly after that flash SuperSU. I do recommend you using freedomos

DirtyWizard said:
Well, I managed to get OOS4 with root and data partition as F2FS.
I followed this procedure and worked out just great ! https://forums.oneplus.net/threads/...g-dm-verity-error.484019/page-2#post-15558781
Not sure if you can skip some of the steps but right now I have OOS4, with root and TWRP (modified) working and capable of decrypting !
Click to expand...
Click to collapse
It requires a USB Otg, but thanks!
I read that TWRP just needs to update their recovery in case I decide to wait
Enviado desde mi ONEPLUS A3000 mediante Tapatalk

Puddi_Puddin said:
You are encrypted.. Decrypt flash Oos 4.0 directly after that flash SuperSU. I do recommend you using freedomos
Click to expand...
Click to collapse
Can you provide me baby steps or refer to ones? My op3 and I will appreciate itt
Enviado desde mi ONEPLUS A3000 mediante Tapatalk

nickest said:
Can you provide me baby steps or refer to ones? My op3 and I will appreciate itt
Enviado desde mi ONEPLUS A3000 mediante Tapatalk
Click to expand...
Click to collapse
I do recommend you to wipe userdata then install freedomOS. (you can choose what you want and what you dont want with freedomos)
1. Boot your device into fastboot
2. Go to your Adb drivers and type "fastboot erase userdata"
3. Once that completed adb push the freedomos zip file. I do recommend 3.4 based on OOS 4.0 or you can do what ever you like. Note: to use adb push I do recommend you to put the install zip in the same folder as the adb drivers then type "adb push NAME_OF_ZIP.zip(or just press tab) /system/
4. If you go to TWRP you will find the installation zip under the folder system.
5. Once that's done boot and profit.

nickest said:
It requires a USB Otg, but thanks!
I read that TWRP just needs to update their recovery in case I decide to wait
Enviado desde mi ONEPLUS A3000 mediante Tapatalk
Click to expand...
Click to collapse
It does not require USB OTG. I managed to get it to work without. Just format Data to F2FS and reboot the phone in recovery.
You can then via MTP easily transfer the files and flash in TWRP.

DirtyWizard said:
It does not require USB OTG. I managed to get it to work without. Just format Data to F2FS and reboot the phone in recovery.
You can then via MTP easily transfer the files and flash in TWRP.
Click to expand...
Click to collapse
Don't! Do not use MTP the chance of corrupted files is to big, thats why Adb has been designed!

TWRP Problem

Situation, i have bootloader unloacked but recovery stock, so i flash "twrp-3.0.3-x_blu_spark_v14-op3.img" but the recovery won't start.
Last twrp i have installed was it e it works well, but after install last beta i have this problem.
What i do wrong?!?

fraizzo said:
Situation, i have bootloader unloacked but recovery stock, so i flash "twrp-3.0.3-x_blu_spark_v14-op3.img" but the recovery won't start.
Last twrp i have installed was it e it works well, but after install last beta i have this problem.
What i do wrong?!?
Click to expand...
Click to collapse
That is not the latest TWRP by bluspark. Flash the latest one.

tnsmani said:
That is not the latest TWRP by bluspark. Flash the latest one.
Click to expand...
Click to collapse
where i can find .img last bluspark?

fraizzo said:
where i can find .img last bluspark?
Click to expand...
Click to collapse
https://forum.xda-developers.com/devdb/project/dl/?id=25628
Sent from my ONEPLUS A3003 using Tapatalk

fraizzo said:
where i can find .img last bluspark?
Click to expand...
Click to collapse
Here you go
https://forum.xda-developers.com/devdb/project/?id=15934#downloads

Thanks, now i have another problem, when i enter in recovery i cannot decrypt with my sequence.
And when i reboot to system, then i try to enter to recovery i find stock recovery

fraizzo said:
Thanks, now i have another problem, when i enter in recovery i cannot decrypt with my sequence.
And when i reboot to system, then i try to enter to recovery i find stock recovery
Click to expand...
Click to collapse
If you can access the OS, change pin/password within the OS to something else, then back to the one you always use then go back to recovery and it should work.

Renosh said:
If you can access the OS, change pin/password within the OS to something else, then back to the one you always use then go back to recovery and it should work.
Click to expand...
Click to collapse
The OS works well, i change my sequence, then back to first sequence, flashed the twrp, it ask me to insert password (not sequence) i try but without success...
I try to translate pattern to number but without success
Code:
1 2 3
4 5 6
7 8 9

fraizzo said:
The OS works well, i change my sequence, then back to first sequence, flashed the twrp, it ask me to insert password (not sequence) i try but without success...
I try to translate pattern to number but without success
Click to expand...
Click to collapse
Means you are encrypted and somehow ****ed. Gotta love force encryption in OOS.

Puddi_Puddin said:
Means you are encrypted and somehow ****ed. Gotta love force encryption in OOS.
Click to expand...
Click to collapse
So what i have to do now?

fraizzo said:
So what i have to do now?
Click to expand...
Click to collapse
Well, if you are sure that you are on the right twrp version by Bluspark. Then I would start with a factory reset. Your phone is encrypted, somehow TWRP asks for a password that never has been setup.

Let's get into business.
On Android go to security settings and select swipe or none in security lock.
Reboot to fastboot, flash the latest TWRP V39, since you are already using bluspark TWRP I won't need to recommend it.
Reboot imediatly to TWRP, Data should get mounted now.
The TWRP version you are on at the moment is outdated, always use the latest build.

Chaplan said:
Let's get into business.
On Android go to security settings and select swipe or none in security lock.
Reboot to fastboot, flash the latest TWRP V39, since you are already using bluspark TWRP I won't need to recommend it.
Reboot imediatly to TWRP, Data should get mounted now.
The TWRP version you are on at the moment is outdated, always use the latest build.
Click to expand...
Click to collapse
I have wiped data and now i can enter in recovery, but if i reboot to os the recovery return stock. Why?
Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk

fraizzo said:
I have wiped data and now i can enter in recovery, but if i reboot to os the recovery return stock. Why?
Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk
Click to expand...
Click to collapse
Reflash TWRP, reboot to recovery, when prompted to give permission to modify system partition you should slide to Yes.
That will keep TWRP in place.

My phone is cripted! on settings i read phone cripted so when i flash twrp it ask me password...
I try to set NONE to security lock but some problem...
I don't want format data again...

[Recovery] TWRP 3.1.1 (unofficial)

I was looking for a TWRP for the Xiaomi Mi Mix 2. I've found a chinese board where a user called YouLinw compiled TWRP for us. According to him and the users there (Google Translator) it seems to work. Can't test it by now, because my Xiaomi Mi Mix 2 isn't shipped right now. It was really tricky to register in this chinese board and then to download the file. You can download it yourself in the board and for all other users I made a mirror with no registration.
There's now a new english TWRP from Xiaomi.eu.
I don't take any responsibilities for this file. If you break or damage your phone, it's your fault!
The recovery is in chinese - but you shuold be able to use it with screenshots in your language.
Download: https://filebase.philipp.technology/filebase/index.php?page=Entry&entryID=12
Credits: https://xiaomi.eu/community/threads/twrp-3-1-1-for-xiaomi-mix-2.41634/
Installation:
Unlock your phone - http://en.miui.com/unlock/
Download TWRP from the link above
Flash over Fastboot
Hope you like it.

Great find! Any idea what version of SuperSU can be used to root The device ?

In this chinese board there's something written like, that SuperSu 2.82 is suitable for the Mix 2 (without guarantee).

PJF16 said:
I was looking for a TWRP for the Xiaomi Mi Mix 2. I've found a chinese board where a user called YouLinw compiled TWRP for us. According to him and the users there (Google Translator) it seems to work. Can't test it by now, because my Xiaomi Mi Mix 2 isn't shipped right now. It was really tricky to register in this chinese board and then to download the file. You can download it yourself in the board and for all other users I made a mirror with no registration.
I don't take any responsibilities for this file. If you break or damage your phone, it's your fault!
The recovery is in chinese - but you shuold be able to use it with screenshots in your language.
Credits & Download: http://bbs.zhiyoo.com/.php?mod=viewthread&tid=13431779&extra=page=1&page=1&state=1
Download (Mirror): https://filebase.philipp.technology/filebase/index.php?page=Entry&entryID=11
Installation:
Unlock your phone - http://en.miui.com/unlock/
Download TWRP from the link above
Flash over Fastboot
Hope you like it.
Click to expand...
Click to collapse
I find another TWRP under mi-globe.com You can try to download at below link:
https://www.filehost.com/?fid=817550096634801044

I added now a new TWRP from a Xiaomi.eu Founder.

Xiaomi.eu released rom for Mi Mix 2, it's called chiron. TWRP as the linked it, here. Might be the same as the OP linked tho.
Should work. My phone arrives next week i will test it.

Yes, it's the same (also see Credits).

PJF16 said:
I added now a new TWRP from a Xiaomi.eu Founder.
Click to expand...
Click to collapse
Me too comes to me next week. I will try it.

Hello guys,
I've flash with fastboot TWRP for my mix2 but when i restarted with fasboot on TWRP it ask me for a password.
Second point : I have no access to files like the xiaomi.eu rom stored on my phone.
anyone faced these issue and is there any solution ? (the bootloader is well unlocked)
ANd when i restart in recovery my phone with power and vol + button, i have the xiaomi recovery and not TWRP.
It is strange, no ??
Thanks for your help

PJF16 said:
In this chinese board there's something written like, that SuperSu 2.82 is suitable for the Mix 2 (without guarantee).
Click to expand...
Click to collapse
Can confirm, superSU 2.82 works on Xiaomi EU rom version 7.9.22

unable to mount /system after nadroid backup
TWRP installed fine and experienced no issues until I made a full Nandroid backup. After the backup I have issues flashing because the device is unable to mount /system . busy or in use error.
So now I wait until official TWRP.

If you are having any twrp issues just reboot into twrp and the issues will be gone. Try again!

Dust2Dust said:
TWRP installed fine and experienced no issues until I made a full Nandroid backup. After the backup I have issues flashing because the device is unable to mount /system . busy or in use error.
So now I wait until official TWRP.
Click to expand...
Click to collapse
Same here
***TAPATALKING***

Is this recovery work on Xiaomi Miui 9 beta rom....?

brunsman6229 said:
Is this recovery work on Xiaomi Miui 9 beta rom....?
Click to expand...
Click to collapse
I am using TWRP with the EU beta 9.

真的假的？

tnt3400 said:
真的假的？
Click to expand...
Click to collapse
English please.

MementoM said:
For the life of me I cannot get this TWRP to do anything. My phone came with Global 8.5 Stable. I confirmed my bootloader is unlocked. I flashed the TWRP and booted it, it boots fine but trying to backup anything I get Failed to unmount "/system" (Device or resource busy). I tried to reboot back into TWRP still same problem, I tried to reflash TWRP through both fastboot and TWRP image installer. I downloaded the EU rom and tried to flash it and it also failed to flash. OEM unlock is checked, USB debugging is on. TWRP gets over written with the Mi Mix recovery whenever I boot back into system, it doesn't ask me if I want to modify anything when it first boots. Why is this giving me so much trouble I've never encountered this problem with TWRP. Any Advice?.
Thanks much
Click to expand...
Click to collapse
There is still no official TWRP available. I always do a full wipe factory reset and manual wipe everything before flashing anything. I also get the errors, but I've never tried to restore a backup because I usually just do clean installs each time because the ROMs available right now aren't stable enough for daily use.
The trick for EU rom is complete wipe than boot back into TWRP and try flashing. You will get 2 errors but will install fine. You can install USB drive or transfer EU rom through mtp via TWRP.

I'll do it like @allrockedout
It seems this TWRP is more beta than stable :-/
Also check the "Mount" button and uncheck the option to open all partitions readonly.
Then reboot TWRP. Last but not least before performing any flash operations (ROM or Magisk/SU-Stuff) check all partitions as marked - then do your flash work
i also miss some more partition that are available to other devices like EFS.
Did anyone know about another TWRP version or devs that are working on one?

raupe said:
I'll do it like @allrockedout
It seems this TWRP is more beta than stable :-/
Also check the "Mount" button and uncheck the option to open all partitions readonly.
Then reboot TWRP. Last but not least before performing any flash operations (ROM or Magisk/SU-Stuff) check all partitions as marked - then do your flash work
i also miss some more partition that are available to other devices like EFS.
Did anyone know about another TWRP version or devs that are working on one?
Click to expand...
Click to collapse
I recommend twrp by @IceMan_it https://www.movilesdualsim.com/index.php?threads/180006
For backup and Restore (with EFS!) with Linux 64 bit https://www.movilesdualsim.com...rilinguee.180989/#post-2060493
Credit: @IceMan_it
Inviato dal mio Mi Note 2 utilizzando Tapatalk

how to root mi max 3 on miui 10 global stable rom

how to root mi max 3 on miui 10 global stable rom

I am also looking for that. yet ı cant find the real true sequence. there ıs twrp and magisk and root so many things... even if i get twrp installed it asks for passwords and i dont know what to do next..

1. Unlooking Bootloader (Official way)
2. Install modded TWRP from this thread: https://forum.xda-developers.com/mi-max-3/development/recovery-twrp-3-2-3-1-nitrogen-t3866084
3. Install newest Magisk Version through TWRP.
4. Done
Did it to my Global Mi Max 3 with 10.0.1.0 MIUI installed without any problems.

Uschinator said:
1. Unlooking Bootloader (Official way)
2. Install modded TWRP from this thread: https://forum.xda-developers.com/mi-max-3/development/recovery-twrp-3-2-3-1-nitrogen-t3866084
3. Install newest Magisk Version through TWRP.
4. Done
Did it to my Global Mi Max 3 with 10.0.1.0 MIUI installed without any problems.
Click to expand...
Click to collapse
Thanks. Did the same and it worked.. Which rom are you using?

Hi , I've unlock the bootloader then flash twrp but any time I enter recovery it ask for a password.
I've try formatting data partition from twrp but it's the same...
What can I do ?
thank's.

Hi
I got this xiaomi mi max3(MIUI Global 10.3.3) at some auciton and I was trying to flash TWRP, and it seemed to be failed.
The bootloader is unlocked from the start and flashing TWRP is succeeded, but either by command prompt or by pressing buttons
I can't get into TWRP.
If anone has any idea please help.

tometoyona said:
Hi
I got this xiaomi mi max3(MIUI Global 10.3.3) at some auciton and I was trying to flash TWRP, and it seemed to be failed.
The bootloader is unlocked from the start and flashing TWRP is succeeded, but either by command prompt or by pressing buttons
I can't get into TWRP.
If anone has any idea please help.
Click to expand...
Click to collapse
use OrangeFox recovery work 100% miui 10.3.5 https://forum.xda-developers.com/mi-max-3/development/official-orangefox-recovery-project-t3890821
extract zip orangefox and execute fastboot boot recovery.img

LostFade said:
use OrangeFox recovery work 100% miui 10.3.5 https://forum.xda-developers.com/mi-max-3/development/official-orangefox-recovery-project-t3890821
extract zip orangefox and execute fastboot boot recovery.img
Click to expand...
Click to collapse
Orange Fox works but I get the same message about the password I got with TWRP. What is the difference?
By the way: I was able to flash magisk with TWRP and all seems to be fine, I just disregarded the TWRP notification about the password...

Gadgetguy65 said:
Orange Fox works but I get the same message about the password I got with TWRP. What is the difference?
By the way: I was able to flash magisk with TWRP and all seems to be fine, I just disregarded the TWRP notification about the password...
Click to expand...
Click to collapse
if problem is password only, format data.

LostFade said:
if problem is password only, format data.
Click to expand...
Click to collapse
I did not want to format anything. I just left it as is (clicked cancel at the password) and flashed the ZIP for Magisk. All works fine after this

anyone tried to root recently? i am also iinterested

Uschinator said:
1. Unlooking Bootloader (Official way)
2. Install modded TWRP from this thread: https://forum.xda-developers.com/mi-max-3/development/recovery-twrp-3-2-3-1-nitrogen-t3866084
3. Install newest Magisk Version through TWRP.
4. Done
Did it to my Global Mi Max 3 with 10.0.1.0 MIUI installed without any problems.
Click to expand...
Click to collapse
Can confirm this works on 10.3.5 also.

DelphinusMinor said:
Can confirm this works on 10.3.5 also.
Click to expand...
Click to collapse
do u know what's the difference between that twrp and the original one?

HSWG said:
do u know what's the difference between that twrp and the original one?
Click to expand...
Click to collapse
No. Maybe it's coded better for Xiaomi phones?

Request Unlock from Xiaomi.
Wait for 1 week. (98 hours)
Search "XiaoMiTool V2"
Don't bother with image flashing. Just follow XiaoMiTool V2.

HSWG said:
do u know what's the difference between that twrp and the original one?
Click to expand...
Click to collapse
The recovery from nigel8 is outdated.
Use orange fox because since a while nigel8 one doesn't support encryption.
Then follow the others steps explained
Regards
Sent from my MI MAX 3 using XDA Labs

Skyllery said:
The recovery from nigel8 is outdated.
Use orange fox because since a while nigel8 one doesn't support encryption.
Then follow the others steps explained
Regards
Sent from my MI MAX 3 using XDA Labs
Click to expand...
Click to collapse
i'm reading up on it now, is orange fox better than twrp? i've never used it..
also, why is encryption support for?

donia1022006 said:
how to root mi max 3 on miui 10 global stable rom
Click to expand...
Click to collapse
This is actually quite easy
1. Unlock the phone using the well documented process
2. Download TWRP for Mi Max 3 (on your PC)
3. Get ADB tools on your PC
4. Download Magisk.zip on the phone
5. Put your phone in fastboot mode
6. Boot TWRP on the phone ( no need to install, you can disregard the encryption comment)
7. Using TWRP flash the Magisk.zip you have downloaded
8. Reboot - and you are rooted

Question Help - (almost) bricked phone [Solved]

Hi,
I was installing with TWRP the rom (https://forum.xda-developers.com/t/unofficial-rom-13-0-encryption-lineageos-20-for-a52s-5g.4574453/) on the phone that had already the Andy Yanś Teble (https://sourceforge.net/projects/an...20230324-UNOFFICIAL-arm64_bvN.img.xz/download) .Something went wrong and although I wiped and formatted when I restarted the phone I got into a boot loop. Forced shutdown with VolUP+VolDown+Power and tried to restart in recovery to go back to TWRP but I cloud only get the standard recovery menu ( see picts).If I try to select reboot to bootloader I get only into a page with a msg :"Secure Check Fail : Modem¨
Via the ADB Sideload I have tried to reinstall the standard ROM but although the transfer seems to start , it remain a 0%.
I just tride to sideload a lineageos rom but although I see the counter going till 100% it does not work .
Any idea on how to get the phone back on its feet ?

did you update bootloader version by flashing stock?

nickanone said:
did you update bootloader version by flashing stock?
Click to expand...
Click to collapse
i faced with same problem week ago

Reboot to Download Mode and Flash Stock Firmware With ODIN3. Don't use ADB Sideload

I
nickanone said:
i faced with same problem week ago
Click to expand...
Click to collapse
This might shout not have happened with the lineagesOS attempt but maybe now that I am trying to install the stock firmware that got stuck to 0% after 1h maybe it is damaged.
Can I sideload only the modem firmware ?.

PalmerBE said:
TÔI
Điều này có thể không xảy ra với lần thử linesOS nhưng có lẽ bây giờ tôi đang cố gắng cài đặt chương trình cơ sở chứng khoán bị kẹt ở 0% sau 1 giờ có thể nó đã bị hỏng.
Tôi có thể chỉ tải chương trình cơ sở của modem không?.
Click to expand...
Click to collapse
bạn cứ flash stock firmware qua Odin3. Sau khi flash xong ngay lập tức điện thoại sẽ khởi động lại. Go to sammobile.com to download stock firmware.

trananhdat2710 said:
Reboot to Download Mode and Flash Stock Firmware With ODIN3. Don't use ADB Sideload
Click to expand...
Click to collapse
I would like to but when I reboot (VolUP+VolDown) in download mode I get a green screen and the phone is not detected by odin. only by adb

PalmerBE said:
I would like to but when I reboot (VolUP+VolDown) in download mode I get a green screen and the phone is not detected by odin. only by adb
Click to expand...
Click to collapse
Touching the power key after the blank green screen I got this
But, where is the "side key" in the A52s 5G. There is only VolUp VolDown and Power ??

PalmerBE said:
I would like to but when I reboot (VolUP+VolDown) in download mode I get a green screen and the phone is not detected by odin. only by adb
Click to expand...
Click to collapse
Have you installed the driver yet??

ok, I discover that the "side key"for the A52s 5g is the "power key"
Odin sees it and I am trying to install the stock rom now
fingercrossed

PalmerBE said:
ok, I discover that the "side key"for the A52s 5g is the "power key"
Odin sees it and I am trying to install the stock rom now
fingercrossed
Click to expand...
Click to collapse
If you run out of bricks after flashing, please leave a comment

Got this error now on the phone and in the terminal

PalmerBE said:
Got this error now on the phone and in the terminal
Click to expand...
Click to collapse
Use this Odin: https://dl2018.sammobile.com/Odin.zip
And remove .md5 from AP, BL, CP, CSC file to skip Odin Check File

Well, at the 3rd attempt and using odin and with a fresh downloaded last firmware of March I am back on stock.
I guess the length/quality of the usb cable might have played a (bad) role too.
Now back to square 0. I have to flash TWRP and all the rest after.
Thanks to all for the support.

You have to flash the latest version of stock ROM, and then reboot to stock ROM at least for once.
It appears that your phone's revision was bumped from rev1 to rev2 which caused your issue.
I thought I had already fixed this, but seems like it's still an issue. I'll take a look into it.