Develop Bugs

[HELP]S4 mini i9192 Recovery Mode Not Working

My s4 mini trailed off suddenly and only goes up samsung version (GT-I9192) I wanted to enter Recovery Mode but he leaves the dead android with an error try updating the firmware but when entering the recovery the problem persists, Beforehand thank you very much
No can place a photo
the error is
(in yellow colour)
#MANUAL MODE#
-- appling multi-CSC...
Applied the CSC-code: TTT
did not match sized ^/system/csc/common/system/csc/others.xml (no data available)
Note: i am Apply one firmware TTT and problem persists

xtunner said:
My s4 mini trailed off suddenly and only goes up samsung version (GT-I9192) I wanted to enter Recovery Mode but he leaves the dead android with an error try updating the firmware but when entering the recovery the problem persists, Beforehand thank you very much
No can place a photo
the error is
(in yellow colour)
#MANUAL MODE#
-- appling multi-CSC...
Applied the CSC-code: TTT
did not match sized ^/system/csc/common/system/csc/others.xml (no data available)
Note: i am Apply one firmware TTT and problem persists
Click to expand...
Click to collapse
Have you installed Custom recovery before?
Follow the instructions provided for our device in this Forum.
I recommend you to Use F4k's TWRP Recovery which is available in Basketbuild.
Best of luck

Ronussks said:
Have you installed Custom recovery before?
Follow the instructions provided for our device in this Forum.
I recommend you to Use F4k's TWRP Recovery which is available in Basketbuild.
Best of luck
Click to expand...
Click to collapse
Bro can`t install any custom recovery, in odin install normal and reset to enter in recovery mode get the error say up, installing firmware(sammobile) the problem persist, in odin is OK perfect installing reset = error recovery and inifinite reset
very thx much for you reply, and need help

xtunner said:
Bro can`t install any custom recovery, in odin install normal and reset to enter in recovery mode get the error say up, installing firmware(sammobile) the problem persist, in odin is OK perfect installing reset = error recovery and inifinite reset
very thx much for you reply, and need help
Click to expand...
Click to collapse
Here try out the instruction provided in the following link:
http://www.s4miniarchive.com/2014/0...-install-cwm-recovery-s4-mini-duos-i9192.html
It worked out for me. Download those files and follow the instructions.
Hope it works.
Good luck

Ronussks said:
Here try out the instruction provided in the following link:
It worked out for me. Download those files and follow the instructions.
Hope it works.
Good luck
Click to expand...
Click to collapse
no, when you enter the recovery mode get the same problem bro

xtunner said:
no, when you enter the recovery mode get the same problem bro
Click to expand...
Click to collapse
Did you fix it bro, since i'm having that problem too and still haven't got a clue so far

Questions
Me pasa lo mismo,todavia no encuentro solucion no me deja hacer absolutamente nada en modo recovery me tira errores y al reiniciar se queda en el logo,se prende y se apaga.Solamente entra en modo dowload,si alguien me puede ayudar lo agradeceria mucho

TWRP new fix bug for Xiaomi Mi5

New update TWRP 3.0 for Mi5
***CHANGELOG***
[2016-03-24]
Remove Boot Verify patch, to fix offical ROM OTA update (to prevent bootloop)
Included 'Boot Verify' option in 'Advanced Settings'.
How to install:
Code:
fastboot flash recovery cofface_twrp_recovery_gemini.img
Link : google driver
Source: Cofface china dev

i'm using it since 24 mars, this is working great. the only bug present is the touchscreen who need 3/4minutes to work.

What does the 'Boot Verify' option do?

@29y6145
Flashed it (seems correctly) but after flash, i disconnected my phone
To make it reboot i just pressed power button for like 10 s
But after it rebooted i just could not access recovery
I dont know the exact button combination to enter recovery and i dont have root until i can get into it
How to?
thanks

nesquix said:
i'm using it since 24 mars, this is working great. the only bug present is the touchscreen who need 3/4minutes to work.
Click to expand...
Click to collapse
will fix bug
Gửi từ MI 5 của tôi bằng cách sử dụng Tapatalk

29y6145 said:
will fix bug
Gửi từ MI 5 của tôi bằng cách sử dụng Tapatalk
Click to expand...
Click to collapse
Cool! Can you also fix accessing the encrypted data partition?
TWRP can do that with the Nexus 5X and 6P.
Thanks!
BTW: What does the "Boot Verify" option do?

I have flashed recovery but I can't see sdcard may be due to the encryption, but then what is the use of recovery if I can't flash anything.

I think the other recovery can deal with encryption, if you have used password not pattern.
Anyway, in the MIUI forum they wrote, wipe data, reboot, wipe data again and encryption should be disabled.
Did not test for myself yet

What other recovery?
Of course, when you wipe /data, then you disable encryption.

there is one from cofface (this thread) and one from ganfan (http://forum.xda-developers.com/mi-5/development/twrp-ganfans-treasure-box-t3343913) ganfan's ask for encryption password

Thanks. Did you try it?

[Easy_Root/Unroot][Any_Oreo/Nougat_Firmware_V4_Bootloaders][Tmp_Twrp_Recovery]

EASY ROOT/UNROOT FOR S7 OR S7E ALL NOUGAT OR OREO STOCK ROMS
THANKS @klabit87 FOR OREO ROOT
TEMPORARY TWRP RECOVERY VIA ADB THANKS TO @afaneh92​
This is for AT&T, T-Mobile and Verizon and Sprint running V4 bootloaders only!​
This tool will allow you too easily root any stock rom allowing you to make any modifications you might want then easily unroot for better performance
This will Also give you a fully functional TWRP recovery that can be accessed via adb. TWRP is fully functional on OREO Roms but is limited on Nougat roms
The initial setup does require a data wipe.​
S7 G930A Flat Odin Factory FIrmware Downloads
G930AUCU4CRI2_8.0_4File_USA (AT&T).7z
ADB_Root Temporary Twrp Tool Download
S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z
S7 G935 Edge Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G935_EDGE_OREO.7z
SM_G935_EDGE_NOUGAT.7z
S7 G930 Flat Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G930_FLAT_OREO.7z
SM_G930_FLAT_NOUGAT.7z
Instructions
1. Download S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z and your model and version you want from above
2. Unzip S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z to S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
3. Unzip the Model/Version file you downloaded and copy the files to the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and place them in the Odin folder
4. Prepare your phone for a data wipe
5. Reboot your phone to download mode and flash the AP_ROOT_G93*.tar in the Odin AP slot and reboot your phone to recovery
6. Once phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
7. Now in the cmd window make sure your device is connected and choose Option (1) Launch TWRP
8. Your phone should launch TWRP leave phone plugged in and command window open on computer
9. Now In Twrp choose wipe and choose format data. Type yes in the box when it ask
10. Now in cmd window choose Option(8) Push Root.zip to Phone
11. Now in TWRP choose install and select the Root.zip
12. After zip is installed reboot and go through setup.
13. Once through setup make sure you are rooted
To Unroot Your Phone
1. In the Root Control app choose phone settings and unroot phone make sure phone is connected to computer
2. Now depending on the type of root you choose your phone will reboot to download if you chose system root or stock recovery if you chose systemless root. If your phone reboots to download mode skip to number 5
3. If your phone reboots to recovery once your phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
4. In cmd window choose Option(3) Unroot phone will reboot too download mode
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
To Reroot Your Phone
1. Reboot to download in Odin AP slot flash AP_ROOT_G93***.tar
2. Phone will reboot then will reboot one more time and you will be rerooted
To Enter TWRP When Rooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Manually reboot phone to recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP
2. To Exit TWRP simply choose reboot
To Enter TWRP When Unrooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Put phone in download mode In Odin AP slot flash AP_ROOT_G93***.tar force phone to reboot to recovery. If you let phone boot it will reroot and you will have to run the unroot from the root control app.
2. In recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP.
3. Do whatever you need too do
4. To exit Twrp choose reboot to Download
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar

Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good

jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
It is not possible to install Magisk, because he is installing his own boot.img and i will be stuck at bootloop? Everything is working by the way, many thanks, but i flashed Viper4Android, it doesn't work, asks for drivers all the time.

Brilliant! Many thanks as I just got this device a few days ago so the timing on this guide is perfect! I had a little trouble after I flashed the BL_ENG_BOOTLOADERS where it constantly boot-looped but once I was able to get it back into download mode (holding volume down, home button, and power button) and start again from step 5 of the unrooting process everything worked according to plan then. I'm happy to announce I've rooted, customized, and unrooted thanks to the simple ease in which this method works so many thanks to jrkruse!

SCUZZY1337 said:
It is not possible to install Magisk, because he is installing his own boot.img and i will be stuck at bootloop? Everything is working by the way, many thanks, but i flashed Viper4Android, it doesn't work, asks for drivers all the time.
Click to expand...
Click to collapse
If you just download viper4 android in xda labs store and install drivers via the app it works fine
Sent using some kind of device I modified

jrkruse said:
If you just download viper4 android in xda labs store and install drivers via the app it works fine
Sent using some kind of device I modified
Click to expand...
Click to collapse
Will try, thank you, magisk ain't work right?
---------- Post added at 07:21 PM ---------- Previous post was at 07:12 PM ----------
jrkruse said:
If you just download viper4 android in xda labs store and install drivers via the app it works fine
Sent using some kind of device I modified
Click to expand...
Click to collapse
The app is installing the driver for ages and never stops, why?

SCUZZY1337 said:
Will try, thank you, magisk ain't work right?
---------- Post added at 07:21 PM ---------- Previous post was at 07:12 PM ----------
The app is installing the driver for ages and never stops, why?
Click to expand...
Click to collapse
Reboot your phone

jrkruse said:
Reboot your phone
Click to expand...
Click to collapse
Installed thru twrp, works perfectly.

Added ATT factory firmware to the OP

jrkruse said:
Added ATT factory firmware to the OP
Click to expand...
Click to collapse
What?

SCUZZY1337 said:
What?
Click to expand...
Click to collapse
What is your what for. I didnt know adding factory firmware to OP needed an explanation
Sent using some kind of device I modified

jrkruse said:
What is your what for. I didnt know adding factory firmware to OP needed an explanation
Sent using some kind of device I modified
Click to expand...
Click to collapse
Is it possible to install magisk?

SCUZZY1337 said:
Is it possible to install magisk?
Click to expand...
Click to collapse
No it is not
Sent using some kind of device I modified

jrkruse said:
No it is not
Sent using some kind of device I modified
Click to expand...
Click to collapse
Could you please tell me the difference between V4 and V8 bootloaders?

SCUZZY1337 said:
Could you please tell me the difference between V4 and V8 bootloaders?
Click to expand...
Click to collapse
Yes v8 bootloaders means the party is over enjoy totally stock because you are not rooting or anything else unless a v8 eng boot gets released and i doubt it because v5 v6 and v7 never got released
Sent using some kind of device I modified

jrkruse said:
Yes v8 bootloaders means the party is over enjoy totally stock because you are not rooting or anything else unless a v8 eng boot gets released and i doubt it because v5 v6 and v7 never got released
Sent using some kind of device I modified
Click to expand...
Click to collapse
Idk i hav V4 and i dont have any lags, everything runs super smooth.

Bonjour,
Il est impossible de télécharger le fichier file:///C:/Users/Yves%20local/Downloads/S7_S7E_ROOT_UNROOT_ADB_TOOLS(1).7z. Le téléchargment démare et puis echec impossible de télécharger???
Merci de votre aide et bravo pour votre travail.

pyveswebsud said:
Bonjour,
Il est impossible de télécharger le fichier file:///C:/Users/Yves%20local/Downloads/S7_S7E_ROOT_UNROOT_ADB_TOOLS(1).7z. Le téléchargment démare et puis echec impossible de télécharger???
Merci de votre aide et bravo pour votre travail.
Click to expand...
Click to collapse
English is required use on xda. Please translate to English
Sent using some kind of device I modified

how compatible do you think this would be with the s7active (native to AT&T carrier) ?
especially now the S7active has recently been updated to Oreo, which also updated its bootloader to v4 ...
worth a go ?

miniminus said:
how compatible do you think this would be with the s7active (native to AT&T carrier) ?
especially now the S7active has recently been updated to Oreo, which also updated its bootloader to v4 ...
worth a go ?
Click to expand...
Click to collapse
Unless you have an eng recovery for oreo for the active and an eng boot.img for oreo you won’t be able to do anything
Sent using some kind of device I modified

Tool for Lenovo Z5 Pro GT [L78032]

use only with L78032
Z5_Pro_GT_TOOL

Unlocked and TWRP installed, but...
Everything worked great (didn't use your batch file, pulled the files and flashed manually) but now the system just sits at the Lenovo logo after the "unlocked device" warning and never boots. I can see the filesystem from within TWRP but nothing works to get it to boot, and this is only a secondary phone so I didn't try to do a backup before flashing anything...
You wouldn't happen to have a flashable stock firmware for this thing, would you? It's a long shot to ask, I know, but now I basically have a brick with TWRP installed lol. I have the 8.1 Qualcomm firmware in a QPST zip file, but the QFIL tool never works and I have no idea how to build firmware using the files inside the zip.
Any advice?
Thanks either way, at least I was able to unlock and flash TWRP. :good:

noobly_dangers said:
Everything worked great (didn't use your batch file, pulled the files and flashed manually) but now the system just sits at the Lenovo logo after the "unlocked device" warning and never boots. I can see the filesystem from within TWRP but nothing works to get it to boot, and this is only a secondary phone so I didn't try to do a backup before flashing anything...
You wouldn't happen to have a flashable stock firmware for this thing, would you? It's a long shot to ask, I know, but now I basically have a brick with TWRP installed lol. I have the 8.1 Qualcomm firmware in a QPST zip file, but the QFIL tool never works and I have no idea how to build firmware using the files inside the zip.
Any advice?
Thanks either way, at least I was able to unlock and flash TWRP. :good:
Click to expand...
Click to collapse
flash magisk to patch boot file

a601943 said:
flash magisk to patch boot file
Click to expand...
Click to collapse
Unfortunately I can't boot into the phone itself, so patching the boot image won't work with Magisk since you have to use the Magisk Manager app to patch (unless there's some way to do it from recovery or fastboot of which I'm not aware).

Z5_Pro_GT_TOOL link goes 404 not found.

a601943 said:
flash magisk to patch boot file
Click to expand...
Click to collapse
noobly_dangers said:
Everything worked great (didn't use your batch file, pulled the files and flashed manually) but now the system just sits at the Lenovo logo after the "unlocked device" warning and never boots. I can see the filesystem from within TWRP but nothing works to get it to boot, and this is only a secondary phone so I didn't try to do a backup before flashing anything...
You wouldn't happen to have a flashable stock firmware for this thing, would you? It's a long shot to ask, I know, but now I basically have a brick with TWRP installed lol. I have the 8.1 Qualcomm firmware in a QPST zip file, but the QFIL tool never works and I have no idea how to build firmware using the files inside the zip.
Any advice?
Thanks either way, at least I was able to unlock and flash TWRP. :good:
Click to expand...
Click to collapse
I guess you were from ZUI ? It has been warned that you are likely to have bootloop after unlocking bootloader. Try this :
- "format data" using twrp
- boot into system
If that doesn't work, flash custom firmware or GSI. Flash through qfil will be your last resort.

Having the same issues here? I would like to fix the phone where can I get an official phone rom ?

Eu consegui resolver apenas pelo qfil, restaurei a stock ROM, com isso o aparelho iniciou novamente.

Supertitan said:
Having the same issues here? I would like to fix the phone where can I get an official phone rom ?
Click to expand...
Click to collapse
No you tube você consegue uma stock ROM, faça com a versão 10.5 da zui

CLOSED

CLOSED

CLOSED

CLOSED

dl link = e404

kischon said:
dl link = e404
Click to expand...
Click to collapse
thx for reporting, fixed

Good morning !
thanks for sharing and working for our Samsung
sm-g973F/DS
I tried to install the kernel and the rom but I am in a situation where the phone does not react anymore when I want to boot it normall
I can only access in download or twrp mode
The classic start does not react
I tried flashing the official Samsung rom via odin, and tried to install the BLASTUI rom several times but nothing works
I proceeded like this on
twrp (latest version) and vbmeta via odin
I deleted the data, and the custom rom that I had
then I flashed the multidisiabler then the bl and finally the rom
but then impossible to start it normally
the phone does not react and remains black
what should i do please?

@Blast752 can you please consider update your installation instructions using my one below.
I think it's more clear & easy to understand because it took me long time to understand your one.
you could make some changes to it.
I think it will help because lot people seem to get bootloop. maybe they dont follow the right steps
0. Unlock bootloader
Fastboot. long press vol up. unlock (wipe phone)
Reboot connect internet to remove RMM (vaultkeeper) & enable oem unlock again
1. TWRP: Fastboot: Odin Flash TWRP .tar latest from corsicanu (AP) + Avbmeta .tar (CP)
(disable auto reboot)
https://twrp.me/samsung/samsunggalaxys10e.html
https://downloads.corsicanu.ro/samsung/vbmeta-27.10.2020/
After flash finish. Press vol up + bixby + power to force boot straight in TWRP
2. TWRP: Wipe Format data + flash multidisabler zip (to disable encryption/security)
https://forum.xda-developers.com/ga...ynos/g97xf-multi-disabler-encryption-t3919714
3. Install latest bootloader (corsicanu): in Fastboot Odin .tar (BL) or TWRP zip
https://github.com/corsicanu/9820-bootloaders_and_modems
Is bootloader flash necessary now? or before TWRP?
4. Flash BlastUI Rom ZIP in twrp
5. (optional) safetynet fix + thundertweaks app

fatjoez said:
@Blast752 pouvez-vous envisager de mettre à jour vos instructions d'installation en utilisant celles ci-dessous.
Je pense que c'est plus clair et plus facile à comprendre car il m'a fallu beaucoup de temps pour comprendre le vôtre.
vous pouvez y apporter quelques modifications.
Je pense que cela aidera parce que beaucoup de gens semblent avoir le bootloop. peut-être qu'ils ne suivent pas les bonnes étapes
0. Déverrouiller le chargeur de démarrage
Démarrage rapide. appuyez longuement sur le volume vers le haut. déverrouiller (effacer le téléphone)
Redémarrez, connectez-vous à Internet pour supprimer RMM (vaultkeeper) et réactivez le déverrouillage OEM
1. TWRP : Fastboot : Odin Flash TWRP .tar le plus récent de corsicanu (AP) + Avbmeta .tar (CP)
(désactiver le redémarrage automatique)
https://twrp.me/samsung/samsunggalaxys10e.html
https://downloads.corsicanu.ro/samsung/vbmeta-27.10.2020/
Après la finition flash. Appuyez sur vol up + bixby + power pour forcer le démarrage directement dans TWRP
2. TWRP : Wipe Format data + flash multidisabler zip (pour désactiver le cryptage/la sécurité)
https://forum.xda-developers.com/ga...ynos/g97xf-multi-disabler-encryption-t3919714
3. Installez le dernier bootloader (corsicanu) : dans Fastboot Odin .tar (BL) ou TWRP zip
https://github.com/corsicanu/9820-bootloaders_and_modems
Le flash du chargeur de démarrage est-il nécessaire maintenant ? ou avant TWRP ?
4. Flash BlastUI Rom ZIP en twrp
5. (facultatif) correctif du filet de sécurité + application Thundertweaks
Click to expand...
Click to collapse
I followed scrupulously step by step exactly but it does not give me anything. Still inactive and black screen with the possibility of flashing twrp and accessing download mode, but that's it.
I don't know what's wrong ..
is it because I own the G973F / DS?
normally with odin I can catch up with this and flash the Samsung firmware and start over but I am stuck with a black screen that does not react if we want to turn it on normally

FabienGege said:
Good morning !
thanks for sharing and working for our Samsung
sm-g973F/DS
I tried to install the kernel and the rom but I am in a situation where the phone does not react anymore when I want to boot it normall
I can only access in download or twrp mode
The classic start does not react
I tried flashing the official Samsung rom via odin, and tried to install the BLASTUI rom several times but nothing works
I proceeded like this on
twrp (latest version) and vbmeta via odin
I deleted the data, and the custom rom that I had
then I flashed the multidisiabler then the bl and finally the rom
but then impossible to start it normally
the phone does not react and remains black
what should i do please?
Click to expand...
Click to collapse
yeah bro latest magisk canary problem, tomorrow i will upload a version with downgraded magisk (v23 stable)

fatjoez said:
@Blast752 can you please consider update your installation instructions using my one below.
I think it's more clear & easy to understand because it took me long time to understand your one.
you could make some changes to it.
I think it will help because lot people seem to get bootloop. maybe they dont follow the right steps
0. Unlock bootloader
Fastboot. long press vol up. unlock (wipe phone)
Reboot connect internet to remove RMM (vaultkeeper) & enable oem unlock again
1. TWRP: Fastboot: Odin Flash TWRP .tar latest from corsicanu (AP) + Avbmeta .tar (CP)
(disable auto reboot)
https://twrp.me/samsung/samsunggalaxys10e.html
https://downloads.corsicanu.ro/samsung/vbmeta-27.10.2020/
After flash finish. Press vol up + bixby + power to force boot straight in TWRP
2. TWRP: Wipe Format data + flash multidisabler zip (to disable encryption/security)
https://forum.xda-developers.com/ga...ynos/g97xf-multi-disabler-encryption-t3919714
3. Install latest bootloader (corsicanu): in Fastboot Odin .tar (BL) or TWRP zip
https://github.com/corsicanu/9820-bootloaders_and_modems
Is bootloader flash necessary now? or before TWRP?
4. Flash BlastUI Rom ZIP in twrp
5. (optional) safetynet fix + thundertweaks app
Click to expand...
Click to collapse
ok bro thanks

FabienGege said:
I followed scrupulously step by step exactly but it does not give me anything. Still inactive and black screen with the possibility of flashing twrp and accessing download mode, but that's it.
I don't know what's wrong ..
is it because I own the G973F / DS?
normally with odin I can catch up with this and flash the Samsung firmware and start over but I am stuck with a black screen that does not react if we want to turn it on normally
Click to expand...
Click to collapse
change kernel or use stock one, latest magisk canary versions gives problems with samsung atm

Blast752 said:
ouais bro dernier problème magisk canary, demain je téléchargerai une version avec magisk rétrogradé (v23 stable)
Click to expand...
Click to collapse
Will it be a zip flashed via twrp?
In your opinion why this blocked with my Samsung (SM-G973F / DS).
THANKS SO MUCH FOR SHARING YOUR KNOWLEDGE!

Blast752 said:
changer le noyau ou utiliser un stock, les dernières versions de magisk peuvent résoudre des problèmes avec samsung atm
Click to expand...
Click to collapse
I will go through the process by changing the kernel several times.
staying of course with the g973 kernels.
I'll keep you informed .
thank you for your speed

FabienGege said:
I will go through the process by changing the kernel several times.
staying of course with the g973 kernels.
I'll keep you informed .
thank you for your speed
Click to expand...
Click to collapse
Did you change kernel? Problem fixed?
If it fix please share instructions & link kernel used

fatjoez said:
Did you change kernel? Problem fixed?
If it fix please share instructions & link kernel used
Click to expand...
Click to collapse
Hello .
I tried several different kernels in g973F ..... some wont flash others yes, but that didn't fix the problem.
I still now have access to the loading screen when the phone is off, but I still can't turn it on.
only download mode and i can flash twrp to access it but that's it.

I succeeded !! My phone works after several days of hard work !!!
I am very happy!
I followed fatjoez's links for vmbeta and multidisiabler and it worked!
Many thanks for the links !!
resolu .

FabienGege said:
J'ai réussi !! Mon téléphone fonctionne après plusieurs jours de travail acharné !!!
Je suis très heureux!
J'ai suivi les liens de fatjoez pour vmbeta et multidisiabler et ça a marché !
Merci beaucoup pour les liens !!
résolu.
Click to expand...
Click to collapse

The rom and excellent but the phone restarts itself

FabienGege said:
I succeeded !! My phone works after several days of hard work !!!
I am very happy!
I followed fatjoez's links for vmbeta and multidisiabler and it worked!
Many thanks for the links !!
resolu .
Click to expand...
Click to collapse
great
can you please post the exact instructions for how you fix it so other people can recover too?
which steps did you follow & which buttons pressed ~~

Start in download mode via the volume button - and bixby while plugging it into my pc.
I flashed the last twrp and the Vmbeta with Fat Joez links (disable reboot on Odin)
Then volume - bixby and power then once the screen is off volume + bixby and power at the same time.
On twrp Factory data reset.
Flashed multidisiabler to twrp, reboot to twrp.
Then flash the rom, wipe data and reboot the system