Smart Notice update not updating - G3 Q&A, Help & Troubleshooting

Hello, i just got the smart notice update and installed via sw update up. The phone reboots but later on it comes to the same status!(when i go to sw update keeps saying conyinue with sw update. The situation never ends. I have tried removing smart notice but i cannot find the app i the uninstaller app.
I am running android 6 on rooted device.
Any help will be very welcomed
Thanks in advance

Related

[HELP] Error Reason 403 when doing VZW update

Saw last night on Engadget that the Verizon update finally came out. I can't use PC Companion because Verizon doesn't use the MTP driver so I have to do OTA update. I also tried SEUS and it said my phone was up to date.
My phone is prompted to install the update; it downloads about 54MB and starts to install after rebooting a few times. Eventually it comes up and says it failed.
I checked Settings > About Phone > Software update > Update now > Info, and it says
Firmware version:
SEMC_R800_R800x_user_3.0.E.2.89_1245-4101_R68C
Source: Verizon Wireless
Update status: Update Failed
Reason code: 403
Update package size: 54.58 MB
This software update includes enhancements and improvements to to your Xperia PLAY(R800x)
MobileCare version: 6.1.0_B191_SE.
I moved a lot of apps to SD to give me more internal space and tried again, same result.
Removed battery for about five minutes; same result.
My Play is rooted and the BL was unlocked, but locked it again so I could do the OTA update.
Any help guys? I'd love to get these awesome features!
EDIT: I also posted this question here http://talk.sonyericsson.com/thread/23855?tstart=0
I read another post saying that if I removed any of the bloatware it would not let me install it. If that is true, can someone point me to a backup of the included apps? I saw a link here a long time ago but now can't find it.
http://forum.xda-developers.com/showthread.php?t=1201725
*facepalm*
I've read over that thread so much I read past that part. Thanks! I"ll let you all know if that fixes it!
ijustwantthedownload said:
*facepalm*
I've read over that thread so much I read past that part. Thanks! I"ll let you all know if that fixes it!
Click to expand...
Click to collapse
You're welcome. Don't forget to hit the "thanks" button!
Unfortunately I received the same result. I installed all the apks I removed earlier and rebooted, then downloaded / installed the update again. Still Error Reason 403. Anyone else have any ideas?
RESOLVED!
I used SEUS and used it to "repair" my device back to settings. I kept all my personal info and apps. I downloaded the update again and it installed just fine. I did lose root access though
forum.xda-developers.com/showthread.php?t=1274634
Sent from my R800i using XDA App

Weather App showing network unavailable!!

I bought my OGP yesterday it was rooted And everything was working fine but then I saw a software update which is not possible due to the rooted device so I decided to unroot it.
I do the full unroot from the SuperSU app and nothing happened. After that I rebooted my device and tried to install the software update but its showing error in installation and after reboot a message pops up that this software update could not be installed on rooted device.
And now my by default weather app is also showing network unavailable message everytime. Dont know what happened. Kindly help!!!!
And I want to go back to stock rom ASAP.
So I can get the software updates.
Thanks to ALLAH its working now
Just try to update the weather app without wifi and then tried wifi its workiing now

Unfortunately the process com.samsung.syncservice has stopped...

This is just documenting a question and solution to a problem that took me a long time and a lot of searching to find. My two sons are earch running a Samsung Galaxy S3 with rooted stock ROMs pretty much since the phones were purchased. Out of the blue and just with this latest NJ2 update, one of their phones never received the OTA and would instead get the following error message: "Unfortunately the process com.samsung.syncservice has stopped". This would appear again when I would try to Update Firmware, Update Samsung Software, Update Profile, and Update PRL. After receiving the error, when I would reboot the phone I could update the PRL and Profile, but if I tried to update Samsung software or update firmware, the message would appear again.
Turns out that the solution was just to clear data/cache on the SyncMLSvc app via Application Manager, and then reboot the phone. Now all is well. Hope this helps someone else, and makes the solution a lot easier to find than it was for me.

[Q] Google play services have stopped working

Hi,
Last night my asus zenwatch stopped working and displayed the error message stating that google play services have stopped working, and from that moment i haven't been able to do any actions on my watch apart from powering off the device. i have contacted google for troubleshooting any they couldn't help me. so i was wondering if you could help me to fix this problem
thanks in advance
Peachy2015 said:
Hi,
Last night my asus zenwatch stopped working and displayed the error message stating that google play services have stopped working, and from that moment i haven't been able to do any actions on my watch apart from powering off the device. i have contacted google for troubleshooting any they couldn't help me. so i was wondering if you could help me to fix this problem
thanks in advance
Click to expand...
Click to collapse
It's normal for it to say that when it's stopping Play Services to install a new version. (Mine did that a few days ago.) Maybe you've gotten it into a bad state by powering it off while it was in the middle of trying to update? You might try uninstalling Play Services on your phone, then reinstall it, and give the watch some time to transfer and install it there.
CSX321 said:
It's normal for it to say that when it's stopping Play Services to install a new version. (Mine did that a few days ago.) Maybe you've gotten it into a bad state by powering it off while it was in the middle of trying to update? You might try uninstalling Play Services on your phone, then reinstall it, and give the watch some time to transfer and install it there.
Click to expand...
Click to collapse
Same problem, android wear force to use newest google play service, but after the google play service transfered to the watch, it stopped working and disconnected:crying:
Just do a factory reset on the watch. When first turning it on at the first Asus screen swipe down diagonally from right to left. This will start it in recovery mode. From there follow on screen prompt to navigate to wipe data and restart.
I have same problem to, from first time i conecting this zenwatch to my zenfone 2
I've tried many ways, and then the last i did...
- Uninstall Android ware ( that updated )
- I try to install android wear oldest version from apk miror that 1.1.1.2113877
- reset my zenwatch and try to conect with oldest android wear
I am so happy that always conect to my zenwatch
- Update firmware my zenwatch
- after finish, i try to uninstall old android wear and install again from play store (updated),
- this work until now...
It works like a charm...
Thx a lot.

Can't download update for moto 360 1rst gen

Hi everyone !
First time posting on xda forums.
I bought on Friday a moto 360 1rst gen. I tryed to update it, but i have some errors messages.
Occasionally I got a notification that says "Can not download the update. The space is not sufficient to download the system update"
When I go into the settings to start the update manually, another message appears "insufficient space".
I rebooted several times the watch and uninstalled the application android wear (I also tested with an older version).
I tried this on my main phone (Note 4) and another (xperia z1 compact) but the notification and error message always appear.
When I put the watch in charge and remove it another message appears "Charge your watch to receive update MEC231". I put the watch in charge and I see the android wear application downloading something in the data options. When the watch is charged to 100% I remove it from the base to start the update but the same message appears that says charge your watch althought the watch is at 100%. I left the watch an afternoon and an evening on the base, when I removed it the message "insufficient space" appeared again in the update options.
I do not know what to do repair the problem. Could you help me please ?
OS version is 4.4.w.2, android wear 1..0.1.1526154 and google play services 8..4.89
Sorry for my english :silly:
Same things for me...
Moto 360 G1 with 2 days of life.
Same FW and Android Wear versions.
I've also tried to install an old version of Android Wear but no way to let him download the firmware.
I've also tried with an old Smartphone with 0 app (so it doesn't sync)...Same Thing
I've reset him contless times but no way.
Any suggestion is appreciated
Try updating by following this procedure:
http://forum.xda-developers.com/mot...1-1-update-t3139099/post63853874#post63853874
Hi thanks for replying =)
I already done this procedure on two different phones but doesn't work :/
But to besure, when it says "delete the lastest version of Android Wear on your phone", that means uninstal android wear from the phone ?
Zechiel said:
Hi thanks for replying =)
I already done this procedure on two different phones but doesn't work :/
But to besure, when it says "delete the lastest version of Android Wear on your phone", that means uninstal android wear from the phone ?
Click to expand...
Click to collapse
Yes, delete the latest Wear app on phone and install older one from apkmirror.
Ok thanks^^
But that's what i've done but doesn't work.
I think i should return the watch to see what's happening.
Thanks a lot for help :good:
Think I'm on the same boat.. I tried this procedure last night a couple times with different phones and didn't seem to get it to work just keep getting the same msgs and notification saying couldn't download update not enough space. Just brought the watch last week brand new..
I've also tried different things but the problem persist.
I've also tried with a smartphone with Android 5.1 and an old Android Wear Apps (June 2015 1.1.1.....) but nothing.
Reading this post https://plus.google.com/communities...9/stream/b5bc95e0-4396-4569-b121-d88ff15986fb seems that Motorola know the issue and in few days will resolve the problem.
Not so good for a Watch with 2 days of life...
So maybe the problem will get fixed? It's annoying... I dont think I even experienced all the watches features
I think so, we just have to wait a few days...
Okay thanks for information
Hope they will fix it.
I've unpaired and reset my watch. Repaired. Now it's going to download the update.
Inexplicable... Or maybe Motorola has worked hard...
Ok i'll try the same.
Edit : Yeah it's working !!!! thx Dimoz =)
Edit 2 : I talked too fast, now i have "[public] full ota to LCA44b" error message.
Do not feel bad. I have factory reset my watch 3 times, each time, the watch will download the new update. Be at 100% battery, yet still tell me either an error has occurred or charge watch before installing (again it is at 100%). At this point, I will wait
Mine is in its box while I contemplated to return it or not so when I get home I am going to give this another try
I charged it fully and went into settings and update. And it updated. It updated to android 5.1.1 is that the most up-to-date?
Same for me, finally get updated to 5.1.1 :laugh:
The latest version is 6.
I'm waiting for this update.
Mine has first update to 5.1.1.
Then i've reset the device. paired and already checked for update (always under charge) and it has found the 6.0.1 update.
Update and reset. Current version 6.0.1 build MEC23I
Now, actually, is an usable smartwatch!
I will give it a chance
Same it worked out. Im very surprised but they seem to have fixed the issue for sure.

Categories

Resources