Develop Bugs

[recovery] CWM RECOVERY for Micromax BOLT A67 [Fully Stable]

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
So guys,
Today, i am sharing you CWM recovery which is perfectly working on our device.
Status - Tested [Every feature including Wipe Data, Wipe Cache, Restore and Backup and Installing zip from SD Card.
Procedure -
i) First of all download these two files.
CWM Recovery-https://www.dropbox.com/s/6xu0yz3jaxzftg9/cwm.rar
Android Multi Tool - http://www.mediafire.com/download/1zk4e1ranhubawa/android+multi+tool+by+shubroneel.rar
ii) Extract and rename the file inside cwm.rar from Boot.img to Recovery.img.
iii) Now extract the Android Multi Tool.
iv) In the folder replace the Recovery.img with the file you renamed earlier.
v) Open Android Multi Tools and enter 0
vi) Now reboot your mobile phone into Bootloader or Fastboot mode (By Holoboot or any other app )
vii) Connect phone to pc via usb cable
viii) Now type in "fastboot flash recovery recovery.img"
ix) Wait for it to finish and type "fastboot reboot"
x) You will be taken to your android UI.
xi) Now you can boot into recovery by Volume Down + Power button.
Enjoy!! Cwm recovery on Micromax A67. :fingers-crossed:
Dont forget to Hit Thanks button ( It will not cost you )

insomaniacdev said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
So guys,
Today, i am sharing you CWM recovery which is perfectly working on our device.
Status - Tested [Every feature including Wipe Data, Wipe Cache, Restore and Backup and Installing zip from SD Card.
Procedure -
i) First of all download these two files.
CWM Recovery-https://www.dropbox.com/s/6xu0yz3jaxzftg9/cwm.rar
Android Multi Tool - http://www.mediafire.com/download/1zk4e1ranhubawa/android+multi+tool+by+shubroneel.rar
ii) Extract and rename the file inside cwm.rar from Boot.img to Recovery.img.
iii) Now extract the Android Multi Tool.
iv) In the folder replace the Recovery.img with the file you renamed earlier.
v) Open Android Multi Tools and enter 0
vi) Now reboot your mobile phone into Bootloader or Fastboot mode (By Holoboot or any other app )
vii) Connect phone to pc via usb cable
viii) Now type in "fastboot flash recovery recovery.img"
ix) Wait for it to finish and type "fastboot reboot"
x) You will be taken to your android UI.
xi) Now you can boot into recovery by Volume Down + Power button.
Enjoy!! Cwm recovery on Micromax A67. :fingers-crossed:
Dont forget to Hit Thanks button ( It will not cost you )
Click to expand...
Click to collapse
can you please provide the drivers ...........tried with sci, universal android drivers but with no luck...........

insomaniacdev said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
So guys,
Today, i am sharing you CWM recovery which is perfectly working on our device.
Status - Tested [Every feature including Wipe Data, Wipe Cache, Restore and Backup and Installing zip from SD Card.
Procedure -
i) First of all download these two files.
CWM Recovery-https://www.dropbox.com/s/6xu0yz3jaxzftg9/cwm.rar
Android Multi Tool - http://www.mediafire.com/download/1zk4e1ranhubawa/android+multi+tool+by+shubroneel.rar
ii) Extract and rename the file inside cwm.rar from Boot.img to Recovery.img.
iii) Now extract the Android Multi Tool.
iv) In the folder replace the Recovery.img with the file you renamed earlier.
v) Open Android Multi Tools and enter 0
vi) Now reboot your mobile phone into Bootloader or Fastboot mode (By Holoboot or any other app )
vii) Connect phone to pc via usb cable
viii) Now type in "fastboot flash recovery recovery.img"
ix) Wait for it to finish and type "fastboot reboot"
x) You will be taken to your android UI.
xi) Now you can boot into recovery by Volume Down + Power button.
Enjoy!! Cwm recovery on Micromax A67. :fingers-crossed:
Dont forget to Hit Thanks button ( It will not cost you )
Click to expand...
Click to collapse
Where to type fastboot flash recovery recovery.img

micromax bolt a067 preloader is dead pc do not detect phone. what can i do

Hi!can i use it for my Haivo hw-w818 spreadtrum sc8825 (dualcore)?thank u!

1) First of all download
CWM RECOVERY ( from above post, sorry as I am a new user I am unable to post the link )
2) extract and copy boot.img into sdcard .
3) then install the rashr app from playstore.
4) open that app and it will ask for root permission allow it.
4) then choose the recovery from storage option
5) then choose the boot.img file from sdcard and Click yes.
6) it will install cwm recovery in micromax bolt a67.
7) at last ,it says partition flashed,reboot into recovery.
8) click yes. Now ur device will reboot into cwm recovery.
Enjoy cwm recovery in micromax bolt a67!!!!
Remember ur device must rooted
Don't forgot to Hit thanks button
Sent from my Micromax A67 using XDA Free mobile app

Any custom recovery for bolt D304 please?

How to root the innjoo max3 3g with philz touch recovery

If you've updated you Innjoo Max 3 3G to android v6 (Marshmallow) and wish to root it, then follow the guide below
How do I root the Innjoo Max 3 3G (Marshmallow)?
* Install VCOM drivers on your PC using https://forum.hovatek.com/thread-440.html
* Download SuperSU 2.78.zip @ http://hovatek.com/redirect.php?link=htt...t=download
* Copy SuperSU.zip to both the phone’s SD card and internal storage
* Download Innjoo Max3 3G philz touch recovery Ported by Team Hovatek @ https://mega.nz/#!PtYHyQIK!s5ygPM525bpP8xNkU1Xt6FLltbjC85fu1Uyh_RU9XHg
* Switch off the phone with battery inside)
* Flash the Philz recovery.img to the phone using SP Flash tool @ https://forum.hovatek.com/thread-159.html
* Boot the phone into recovery mode using Volume up button + Power button (see https://forum.hovatek.com/thread-479.html )
* In Philz recovery, you use the Volume buttons to navigate and Power button to select
* Select Install Zip
* Navigate to the location of the SuperSU2.78.zip on the SD Card and select it
* Wait till flashing is complete
* If you are prompted to fix root, Select No
* Reboot the phone normally
* Confirm Root by installing and running Root Checker @ http://www24.zippyshare.com/v/CJzC1ZdP/file.html
Credits
@Hovatek of the HOVATEK Forum for helping me create this port when I requested for it
@emmanuel of {Androidvillaz} for providing me with the Innjoo max3 3G stock recovery.img file
And of course to myself @mr vanderluv for carrying out the testing

[twrp][ported] all ported twrp for realme 3

ALL WORKING PORTED TWRP FOR REALME 3
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Prerequisites
1. Unlocked bootloader.
Bugs:
Tell Me
Instructions
1. Go to the fastboot mode.
2. Download the recovery.img and transfer it to the adb folder.
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
5. After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery twrp-name.img
BooM ! TWRP flashed successfully.
6. fastboot oem reboot-recovery
Enjoy !
Downloads : https://drive.google.com/open?id=14g1y5d7DlbTibKv0Evr_Bfs5dTZTz7rJ
XDAevDB Information
TWRP For Realme 3, Kernel for the Oppo Realme 3
Credits :
Realme 1 & Umidigi F1 Play TWRP
@jeffalaiza
@realme3dev
Version Information
Status: Stable
Screenshot : Inside the link
Please Thanks Me

[RECOVERY] Pitch Black Recovery for Realme X [RMX1901]

Code:
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this project
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Prerequisites
1. Unlocked bootloader.
Bugs
1. No bugs
2. If you have found a bug, please consider posting it to my GitHub Issues.
Instructions
# Method 1 (Fastboot Installation)
1. Boot into fastboot mode by adb reboot bootloader or key combo, doesn't matter.
2. Download the twrp image following the link in the download section and transfer it to the adb folder (or add adb to PATH for universal access).
3. Open the cmd/terminal and change directory into the adb folder (or where you downloaded twrp image).
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug, linux users may need to change connection type to transfer files from charging only.
5. After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery <pbrp-recovery.img>
BooM ! PBRP flashed successfully.
# Method 2 (Zip Flashing)
1. If you haveany custom recovery(TWRP, Orange Fox etc.) installed in your device, then this is just a piece of cake.
2. Download & flash the zip from custom recovery install menu.
3. It will reboot to recovery automatically after that.
BooM ! PBRP flashed successfully.
Note: Flashable zip contains decryption patch, so you don't need to worry about encryption, you can check log right after flasing PBRP, there should be a string in green color confirming device encryption status.
Downloads
Both Image & Zip=> Here
XDA:DevDB Information
PBRP For Realme X, Kernel for the Realme X
Contributors
chankruze
Source Code: https://github.com/N00bTree/android_device_realme_RMX1901
Kernel Special Features:
Version Information
Status: Testing
Created 2019-09-20
Last Updated 2019-09-23

I cannot believe my eyes ! Thanks so much

No boot my phone..
How to flash...
Add Video..
Help me bro..

Development [Recovery][UnOfficial][A12][A13] OrangeFox Recovery 11.0

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Download:
*.ZIP LINK
*.TAR LINK
Bugs
Decryption will only work if no password/PIN/pattern is set in Android.
You tell me.
How to install
Spoiler: If you dont have a custom recovery installed
[*]Make sure your bootloader is already unlocked and OEM unlock is enabled, otherwise the installation will fail.
[*]Download and install Samsung Drivers
[*]Download the latest *.tar for your phone
[*]Download Odin, from example from https://downloads.corsicanu.ro/samsung/
[*]If not done before, flash disabled VBMeta with Odin in AP slot
[*]Turn off your phone, connect it to PC and reboot to download mode by holding down Volume up, Volume down and power button at the same time.
[*]Open Odin and check if your device is detected, then untick "Autoreboot" in its settings.
[*]Put the tar file you downloaded into the AP tab
[*]Click start and wait for the installation to finish, Odin will show PASS
[*]Now hold down Power button and Volume down for about 10 seconds to force reboot the device
[*]Immediately after the screen goes black release the keys and hold down Volume up and Power button at the same time until you enter OrangeFox (You may need to release the keys after about 20-30secs due to the "unlocked bootloader" warning)
[*]If you properly followed all the steps you should now see the OrangeFox menu.
[*]I HIGHLY recommend to flash services disabler right after you enter OrangeFox to disable forced encryption and stock recovery restoration.
[*]IF YOU ALREADY HAVE TWRP OR OLDER ORANGEFOX BUILDS INSTALLED, JUST DOWNLOAD AND FLASH THE ZIP FILE IN RECOVERY
Spoiler: If you do have a custom recovery installed
[*]Download the *.zip file
[*]Flash it in recovery.
[*]Once its done flashing, phone will reboot on its own to recovery
[*]If you properly followed all the steps you should now see the OrangeFox menu.
Sources: https://github.com/RisenID/android_device_samsung_a52sxq
Credits:
Orangefox team
@BlackMesa123 for the TWRP trees and general help and support.
@corsicanu for updating multidisabler for A12 and providing download links for Odin, USB drivers, etc.
Thanks to all my testers, you know who you are <3

Hey guys, after a lot of thpught, I have decided to drop official support, and provide unofficial builds, so that I can give you guys the best possible builds that I can, so there will be no more official ofox builds from me, but there will be unofficial ones. Thanks for understanding, hope you like these builds.

Changelogs
R11.1
- Fix /vendor backup restoring
- Updated kernel to DVK5
- Support Android 13 decrypt with no password
- Fix /efs, /sec_efs backup
- Fix fastbootd
- Disable stock recovery patching in /vendor
-Bundle Magisk Delta instead of Magisk

Reserved