Develop Bugs

[recovery] CWM RECOVERY for Micromax BOLT A67 [Fully Stable]

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
So guys,
Today, i am sharing you CWM recovery which is perfectly working on our device.
Status - Tested [Every feature including Wipe Data, Wipe Cache, Restore and Backup and Installing zip from SD Card.
Procedure -
i) First of all download these two files.
CWM Recovery-https://www.dropbox.com/s/6xu0yz3jaxzftg9/cwm.rar
Android Multi Tool - http://www.mediafire.com/download/1zk4e1ranhubawa/android+multi+tool+by+shubroneel.rar
ii) Extract and rename the file inside cwm.rar from Boot.img to Recovery.img.
iii) Now extract the Android Multi Tool.
iv) In the folder replace the Recovery.img with the file you renamed earlier.
v) Open Android Multi Tools and enter 0
vi) Now reboot your mobile phone into Bootloader or Fastboot mode (By Holoboot or any other app )
vii) Connect phone to pc via usb cable
viii) Now type in "fastboot flash recovery recovery.img"
ix) Wait for it to finish and type "fastboot reboot"
x) You will be taken to your android UI.
xi) Now you can boot into recovery by Volume Down + Power button.
Enjoy!! Cwm recovery on Micromax A67. :fingers-crossed:
Dont forget to Hit Thanks button ( It will not cost you )

insomaniacdev said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
So guys,
Today, i am sharing you CWM recovery which is perfectly working on our device.
Status - Tested [Every feature including Wipe Data, Wipe Cache, Restore and Backup and Installing zip from SD Card.
Procedure -
i) First of all download these two files.
CWM Recovery-https://www.dropbox.com/s/6xu0yz3jaxzftg9/cwm.rar
Android Multi Tool - http://www.mediafire.com/download/1zk4e1ranhubawa/android+multi+tool+by+shubroneel.rar
ii) Extract and rename the file inside cwm.rar from Boot.img to Recovery.img.
iii) Now extract the Android Multi Tool.
iv) In the folder replace the Recovery.img with the file you renamed earlier.
v) Open Android Multi Tools and enter 0
vi) Now reboot your mobile phone into Bootloader or Fastboot mode (By Holoboot or any other app )
vii) Connect phone to pc via usb cable
viii) Now type in "fastboot flash recovery recovery.img"
ix) Wait for it to finish and type "fastboot reboot"
x) You will be taken to your android UI.
xi) Now you can boot into recovery by Volume Down + Power button.
Enjoy!! Cwm recovery on Micromax A67. :fingers-crossed:
Dont forget to Hit Thanks button ( It will not cost you )
Click to expand...
Click to collapse
can you please provide the drivers ...........tried with sci, universal android drivers but with no luck...........

insomaniacdev said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
So guys,
Today, i am sharing you CWM recovery which is perfectly working on our device.
Status - Tested [Every feature including Wipe Data, Wipe Cache, Restore and Backup and Installing zip from SD Card.
Procedure -
i) First of all download these two files.
CWM Recovery-https://www.dropbox.com/s/6xu0yz3jaxzftg9/cwm.rar
Android Multi Tool - http://www.mediafire.com/download/1zk4e1ranhubawa/android+multi+tool+by+shubroneel.rar
ii) Extract and rename the file inside cwm.rar from Boot.img to Recovery.img.
iii) Now extract the Android Multi Tool.
iv) In the folder replace the Recovery.img with the file you renamed earlier.
v) Open Android Multi Tools and enter 0
vi) Now reboot your mobile phone into Bootloader or Fastboot mode (By Holoboot or any other app )
vii) Connect phone to pc via usb cable
viii) Now type in "fastboot flash recovery recovery.img"
ix) Wait for it to finish and type "fastboot reboot"
x) You will be taken to your android UI.
xi) Now you can boot into recovery by Volume Down + Power button.
Enjoy!! Cwm recovery on Micromax A67. :fingers-crossed:
Dont forget to Hit Thanks button ( It will not cost you )
Click to expand...
Click to collapse
Where to type fastboot flash recovery recovery.img

micromax bolt a067 preloader is dead pc do not detect phone. what can i do

Hi!can i use it for my Haivo hw-w818 spreadtrum sc8825 (dualcore)?thank u!

1) First of all download
CWM RECOVERY ( from above post, sorry as I am a new user I am unable to post the link )
2) extract and copy boot.img into sdcard .
3) then install the rashr app from playstore.
4) open that app and it will ask for root permission allow it.
4) then choose the recovery from storage option
5) then choose the boot.img file from sdcard and Click yes.
6) it will install cwm recovery in micromax bolt a67.
7) at last ,it says partition flashed,reboot into recovery.
8) click yes. Now ur device will reboot into cwm recovery.
Enjoy cwm recovery in micromax bolt a67!!!!
Remember ur device must rooted
Don't forgot to Hit thanks button
Sent from my Micromax A67 using XDA Free mobile app

Any custom recovery for bolt D304 please?

TWRP Recovery

Guide to Install TWRP Recovery.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Make Sure you are on Stock Rom.
Requirements​
.Unlocked Boot loader
Enable developer Option ( settings/ About Phone /Version) tab 7 Times
Select USB Debugging Connect the mobile with pc
Open & Put adb commands
Code:
adb reboot bootloader
After Reboot
Code:
fastboot oem unlock
.ADB drivers Installed
.SP Flash tool
Instructions​
1. Download All files from Download section
2. Extract all files cofigure adb and drivers
3. Open SP Flashtool and Select the scatter file from the extracted folder(SP Flash tool)
4. Select Download Agent as DA_PL.bin recovery and userdata
5. Click Download and Flash phone
6. Enter Recovery by pressing VOL+ & Power Keys
7. Go to Wipe, Format Data, Go to Advance wipe, Select Dalvik Cache & Cache and Wipe.
Restart
Downloads​SP FLASH TOOL
ADB DRIVER INSTALLER
ADB TOOLS
Recovery.img & User data.img
Boot loop Solution​
.Switch Off (Press and Hold Power button)
. open SP Flash tool
. Select scatter file
. Select userdata and untick recovery.img
. Open download agent and select DA_PL.bin
. Select Download and hit start
. Connect to PC (flash mode)
.Wait for the process to finish
XDA:DevDB Information
TWRP recovery. 3.0, Tool/Utility for the LeEco Le 1S
Contributors
mukulatri
Version Information
Status: Testing
Current Stable Version: 3.0
Created 2016-03-28
Last Updated 2016-03-28

Reserved

Reserved

Please also note that in the OP that you need to open the bootloader only in X507 Le 1s. This is not neccesary for X501 and X500

Offical TWRP isnt release

post any screenshots bro

not work on x501

[EXPERIMENT] how to get root access on vivo y51l.

Hey guys, finally you can get root access on your vivo y51l. However this method is only tested on CyanogenMod 12.1, and will be tested on other roms too within few days.
WARNING
* I'm not responsible for bricked devices, dead SD cards,
* or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about Rooting your device.
* Before flashing it! YOU are choosing to make these modifications.
1- CyanogenMod 12.1
*Whats working:-
-booting
-touchscreen
-Internet
-Camera
-LED flash light
-Bluetooth
*Whats not working:-
Everything except above things.
2- MiUi 9
*Whats working:-
Booting
Touchscreen
Wifi
Bluetooth
Camera
LED flash light
Internet
*Whats not working:-
Everything except above things.
NOTE 1- Backup your current data, system, boot.img and any important data before doing anything.
NOTE 2- After flashing this file you will not be able to use custom recovery. If you want to use any custom recovery, you have to reflash your backed up boot.img using fastboot.
*How to flash:-
1- Download the img file from below link.
2- Rename downloaded file to boot.img
3- Boot into fastboot mode.
4- Flash boot.img by typing "fastboot flash boot boot.img"
5- Reboot to system.
*How to flash on MiUi 9:-
https://youtu.be/dshjCSErtzE
DOWNLOAD'S
1- for CyanogenMod 12.1
https://mega.nz/#F!lKJDEZTa!1_kCvDk63djtx3rSksQzbQ
2- For MiUi 9
https://forum.xda-developers.com/android/development/root-root-vivo-y51l-t3744877

If brick
I am new in this so please tell me If my vivo y51l is bricked then what i have ti do.

Hey, can you tell the modifications you did in the boot.img? I want to root vivo y55L, but it can't be rooted because of the kernel, I think. Any help would be appreciated. Thanks btw.

[RECOVERY][3.5.2_10][gtelwifiue][gtesqltespr] TWRP Recovery

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Installation
Download version .tar when you haven't a TWRP installed and you are coming from stock ROM and flash it via Odin in download mode. NOTE: Un-check Auto-reboot option in Odin, install tar file (it has to be placed in AP section) and after reboot manually in recovery mode with vol+, home and power buttons. This because otherwise you'll come back to stock recovery.
Download version .img when you have a TWRP installed. Simply, from home, go in install -> install image -> select your .img file -> press recovery as partition where you want to install it -> swipe to flash -> reboot system.
Download version .zip if you have an old TWRP. (you can install a .img or .zip file, as you want)
Bugs/Issues
Encryption with password isn’t supported, so don’t set the secure boot or put a password at the boot of the device
Download
gtelwifiue (SM-T560NU): https://www.androidfilehost.com/?w=files&flid=328969
gtesqltespr (SM-T377P): https://www.androidfilehost.com/?w=files&flid=328968
Source code
gtelwifiue: https://github.com/TWRPSG-8916/android_device_samsung_gtelwifiue
gtesqltespr: https://github.com/TWRPSG-8916/android_device_samsung_gtesqltespr
Kernel: https://github.com/LOSSG-8916/android_kernel_samsung_msm8916

DJABHipHop said:
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Installation
Download version .tar when you haven't a TWRP installed and you are coming from stock ROM and flash it via Odin in download mode. NOTE: Un-check Auto-reboot option in Odin, install tar file (it has to be placed in AP section) and after reboot manually in recovery mode with vol+, home and power buttons. This because otherwise you'll come back to stock recovery.
Download version .img when you have a TWRP installed. Simply, from home, go in install -> install image -> select your .img file -> press recovery as partition where you want to install it -> swipe to flash -> reboot system.
Download version .zip if you have an old TWRP. (you can install a .img or .zip file, as you want)
Bugs/Issues
Encryption with password isn’t supported, so don’t set the secure boot or put a password at the boot of the device
Download
gtelwifiue (SM-T560NU): https://www.androidfilehost.com/?w=files&flid=328969
gtesqltespr (SM-T377P): https://www.androidfilehost.com/?w=files&flid=328968
Source code
gtelwifiue: https://github.com/TWRPSG-8916/android_device_samsung_gtelwifiue
gtesqltespr: https://github.com/TWRPSG-8916/android_device_samsung_gtesqltespr
Kernel: https://github.com/LOSSG-8916/android_kernel_samsung_msm8916
Click to expand...
Click to collapse
thank you for all your great and dedicated hard work

blaze2051 said:
thank you for all your great and dedicated hard work
Click to expand...
Click to collapse
NP

New TWRP 10 update for Samsung Galaxy Tab E 9.6 & Samsung Galaxy Tab E 8.0 MSM8916 Model
Change Log:
- Backup Now Works.
- Plus All Partitions can now be backup.

Hi there!!
I'm having some troubles installing TWRP on a gtelwifiue (Samsung SM-T561). Could the 3.5.2_10 version work also on this device?
I apparently uploaded with success TWRP through heimdall, but when I restart the device with (volumeUp+home+power) the recovery doesn't show up; instead, I get the logo splashpage with a small red exclamation mark on the top left :-|

fillotassi said:
Hi there!!
I'm having some troubles installing TWRP on a gtelwifiue (Samsung SM-T561). Could the 3.5.2_10 version work also on this device?
I apparently uploaded with success TWRP through heimdall, but when I restart the device with (volumeUp+home+power) the recovery doesn't show up; instead, I get the logo splashpage with a small red exclamation mark on the top left :-|
Click to expand...
Click to collapse
Nope, This version of TWRP is for SM-T560NU & the SM-T337P.

Development [Recovery][UnOfficial][A12][A13] OrangeFox Recovery 11.0

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Download:
*.ZIP LINK
*.TAR LINK
Bugs
Decryption will only work if no password/PIN/pattern is set in Android.
You tell me.
How to install
Spoiler: If you dont have a custom recovery installed
[*]Make sure your bootloader is already unlocked and OEM unlock is enabled, otherwise the installation will fail.
[*]Download and install Samsung Drivers
[*]Download the latest *.tar for your phone
[*]Download Odin, from example from https://downloads.corsicanu.ro/samsung/
[*]If not done before, flash disabled VBMeta with Odin in AP slot
[*]Turn off your phone, connect it to PC and reboot to download mode by holding down Volume up, Volume down and power button at the same time.
[*]Open Odin and check if your device is detected, then untick "Autoreboot" in its settings.
[*]Put the tar file you downloaded into the AP tab
[*]Click start and wait for the installation to finish, Odin will show PASS
[*]Now hold down Power button and Volume down for about 10 seconds to force reboot the device
[*]Immediately after the screen goes black release the keys and hold down Volume up and Power button at the same time until you enter OrangeFox (You may need to release the keys after about 20-30secs due to the "unlocked bootloader" warning)
[*]If you properly followed all the steps you should now see the OrangeFox menu.
[*]I HIGHLY recommend to flash services disabler right after you enter OrangeFox to disable forced encryption and stock recovery restoration.
[*]IF YOU ALREADY HAVE TWRP OR OLDER ORANGEFOX BUILDS INSTALLED, JUST DOWNLOAD AND FLASH THE ZIP FILE IN RECOVERY
Spoiler: If you do have a custom recovery installed
[*]Download the *.zip file
[*]Flash it in recovery.
[*]Once its done flashing, phone will reboot on its own to recovery
[*]If you properly followed all the steps you should now see the OrangeFox menu.
Sources: https://github.com/RisenID/android_device_samsung_a52sxq
Credits:
Orangefox team
@BlackMesa123 for the TWRP trees and general help and support.
@corsicanu for updating multidisabler for A12 and providing download links for Odin, USB drivers, etc.
Thanks to all my testers, you know who you are <3

Hey guys, after a lot of thpught, I have decided to drop official support, and provide unofficial builds, so that I can give you guys the best possible builds that I can, so there will be no more official ofox builds from me, but there will be unofficial ones. Thanks for understanding, hope you like these builds.

Changelogs
R11.1
- Fix /vendor backup restoring
- Updated kernel to DVK5
- Support Android 13 decrypt with no password
- Fix /efs, /sec_efs backup
- Fix fastbootd
- Disable stock recovery patching in /vendor
-Bundle Magisk Delta instead of Magisk

Reserved