Develop Bugs

[recovery] CWM RECOVERY for Micromax BOLT A67 [Fully Stable]

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
So guys,
Today, i am sharing you CWM recovery which is perfectly working on our device.
Status - Tested [Every feature including Wipe Data, Wipe Cache, Restore and Backup and Installing zip from SD Card.
Procedure -
i) First of all download these two files.
CWM Recovery-https://www.dropbox.com/s/6xu0yz3jaxzftg9/cwm.rar
Android Multi Tool - http://www.mediafire.com/download/1zk4e1ranhubawa/android+multi+tool+by+shubroneel.rar
ii) Extract and rename the file inside cwm.rar from Boot.img to Recovery.img.
iii) Now extract the Android Multi Tool.
iv) In the folder replace the Recovery.img with the file you renamed earlier.
v) Open Android Multi Tools and enter 0
vi) Now reboot your mobile phone into Bootloader or Fastboot mode (By Holoboot or any other app )
vii) Connect phone to pc via usb cable
viii) Now type in "fastboot flash recovery recovery.img"
ix) Wait for it to finish and type "fastboot reboot"
x) You will be taken to your android UI.
xi) Now you can boot into recovery by Volume Down + Power button.
Enjoy!! Cwm recovery on Micromax A67. :fingers-crossed:
Dont forget to Hit Thanks button ( It will not cost you )

insomaniacdev said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
So guys,
Today, i am sharing you CWM recovery which is perfectly working on our device.
Status - Tested [Every feature including Wipe Data, Wipe Cache, Restore and Backup and Installing zip from SD Card.
Procedure -
i) First of all download these two files.
CWM Recovery-https://www.dropbox.com/s/6xu0yz3jaxzftg9/cwm.rar
Android Multi Tool - http://www.mediafire.com/download/1zk4e1ranhubawa/android+multi+tool+by+shubroneel.rar
ii) Extract and rename the file inside cwm.rar from Boot.img to Recovery.img.
iii) Now extract the Android Multi Tool.
iv) In the folder replace the Recovery.img with the file you renamed earlier.
v) Open Android Multi Tools and enter 0
vi) Now reboot your mobile phone into Bootloader or Fastboot mode (By Holoboot or any other app )
vii) Connect phone to pc via usb cable
viii) Now type in "fastboot flash recovery recovery.img"
ix) Wait for it to finish and type "fastboot reboot"
x) You will be taken to your android UI.
xi) Now you can boot into recovery by Volume Down + Power button.
Enjoy!! Cwm recovery on Micromax A67. :fingers-crossed:
Dont forget to Hit Thanks button ( It will not cost you )
Click to expand...
Click to collapse
can you please provide the drivers ...........tried with sci, universal android drivers but with no luck...........

insomaniacdev said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
So guys,
Today, i am sharing you CWM recovery which is perfectly working on our device.
Status - Tested [Every feature including Wipe Data, Wipe Cache, Restore and Backup and Installing zip from SD Card.
Procedure -
i) First of all download these two files.
CWM Recovery-https://www.dropbox.com/s/6xu0yz3jaxzftg9/cwm.rar
Android Multi Tool - http://www.mediafire.com/download/1zk4e1ranhubawa/android+multi+tool+by+shubroneel.rar
ii) Extract and rename the file inside cwm.rar from Boot.img to Recovery.img.
iii) Now extract the Android Multi Tool.
iv) In the folder replace the Recovery.img with the file you renamed earlier.
v) Open Android Multi Tools and enter 0
vi) Now reboot your mobile phone into Bootloader or Fastboot mode (By Holoboot or any other app )
vii) Connect phone to pc via usb cable
viii) Now type in "fastboot flash recovery recovery.img"
ix) Wait for it to finish and type "fastboot reboot"
x) You will be taken to your android UI.
xi) Now you can boot into recovery by Volume Down + Power button.
Enjoy!! Cwm recovery on Micromax A67. :fingers-crossed:
Dont forget to Hit Thanks button ( It will not cost you )
Click to expand...
Click to collapse
Where to type fastboot flash recovery recovery.img

micromax bolt a067 preloader is dead pc do not detect phone. what can i do

Hi!can i use it for my Haivo hw-w818 spreadtrum sc8825 (dualcore)?thank u!

1) First of all download
CWM RECOVERY ( from above post, sorry as I am a new user I am unable to post the link )
2) extract and copy boot.img into sdcard .
3) then install the rashr app from playstore.
4) open that app and it will ask for root permission allow it.
4) then choose the recovery from storage option
5) then choose the boot.img file from sdcard and Click yes.
6) it will install cwm recovery in micromax bolt a67.
7) at last ,it says partition flashed,reboot into recovery.
8) click yes. Now ur device will reboot into cwm recovery.
Enjoy cwm recovery in micromax bolt a67!!!!
Remember ur device must rooted
Don't forgot to Hit thanks button
Sent from my Micromax A67 using XDA Free mobile app

Any custom recovery for bolt D304 please?

TWRP Recovery

Guide to Install TWRP Recovery.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Make Sure you are on Stock Rom.
Requirements​
.Unlocked Boot loader
Enable developer Option ( settings/ About Phone /Version) tab 7 Times
Select USB Debugging Connect the mobile with pc
Open & Put adb commands
Code:
adb reboot bootloader
After Reboot
Code:
fastboot oem unlock
.ADB drivers Installed
.SP Flash tool
Instructions​
1. Download All files from Download section
2. Extract all files cofigure adb and drivers
3. Open SP Flashtool and Select the scatter file from the extracted folder(SP Flash tool)
4. Select Download Agent as DA_PL.bin recovery and userdata
5. Click Download and Flash phone
6. Enter Recovery by pressing VOL+ & Power Keys
7. Go to Wipe, Format Data, Go to Advance wipe, Select Dalvik Cache & Cache and Wipe.
Restart
Downloads​SP FLASH TOOL
ADB DRIVER INSTALLER
ADB TOOLS
Recovery.img & User data.img
Boot loop Solution​
.Switch Off (Press and Hold Power button)
. open SP Flash tool
. Select scatter file
. Select userdata and untick recovery.img
. Open download agent and select DA_PL.bin
. Select Download and hit start
. Connect to PC (flash mode)
.Wait for the process to finish
XDA:DevDB Information
TWRP recovery. 3.0, Tool/Utility for the LeEco Le 1S
Contributors
mukulatri
Version Information
Status: Testing
Current Stable Version: 3.0
Created 2016-03-28
Last Updated 2016-03-28

Reserved

Reserved

Please also note that in the OP that you need to open the bootloader only in X507 Le 1s. This is not neccesary for X501 and X500

Offical TWRP isnt release

post any screenshots bro

not work on x501

[IMAGE][STOCK][TWRP] Stock system image for WI500Q - anthias [WIP]

Code:
/*
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear wars, exploding phones or you getting fired because the alarm app (Which Happens at Low Battery) failed.
* Please if you have any concerns do some research:
* YOU are choosing to make these modifications,
* and if you point the finger at me for messing up your device, I will laugh at you.
*
*/
Here is my simple tutorial to revert back to a stock system image of ZenWatch.
On this link, you can find a .zip file:
it's a backup of my personal asset of the watch, so please cleanse data and cache before booting it up.
To reset your device to stock, you need to download TWRP recovery for ZenWatch and flash it by issuing in a terminal:
Code:
fastboot flash recovery recoveryfile.img
Once you have flashed the recovery (please note that you need to have your bootloader unlocked, refer to this thread), enter it.
Using the TWRP integrated MTP file transfer, extract the .rar file above into the root of the ZenWatch.
Then reboot the recovery into recovery (TWRP needs this step to index backups in memory) and select 'Restore' option.
Then you can find your stock recovery here, to have running the original.
Remember: to flash a recovery, always use
Code:
fastboot flash recovery recoveryfile.img
Happy flashing!
EDIT: You can find the updated version of this guide here.

I didnt find the image, do you have it??
---------- Post added at 04:38 PM ---------- Previous post was at 04:37 PM ----------
EmilioDallaTorre said:
Code:
/*
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear wars, exploding phones or you getting fired because the alarm app (Which Happens at Low Battery) failed.
* Please if you have any concerns do some research:
* YOU are choosing to make these modifications,
* and if you point the finger at me for messing up your device, I will laugh at you.
*
*/
Here is my simple tutorial to revert back to a stock system image of ZenWatch.
In the attachments of this post, you can find a .rar file:
it's a backup of my personal asset of the watch, so please cleanse data and cache before booting it up.
To reset your device to stock, you need to download TWRP recovery for ZenWatch and flash it by issuing in a terminal:
Code:
fastboot flash recovery recoveryfile.img
Once you have flashed the recovery (please note that you need to have your bootloader unlocked, refer to this thread), enter it.
Using the TWRP integrated MTP file transfer, extract the .rar file above into the root of the ZenWatch.
Then reboot the recovery into recovery (TWRP needs this step to index backups in memory) and select 'Restore' option.
Then you can find your stock recovery here, to have running the original.
Remember: to flash a recovery, always use
Code:
fastboot flash recovery recoveryfile.img
Happy flashing!
Click to expand...
Click to collapse
I didnt find the image, do you have it??

[RECOVERY][OFFICIAL][NX589J] Official TWRP 3.x recovery for Nubia Z17 Mini S

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is not void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
All function in a normal TWRP
Multi-language support
USB OTG
Decrypt /data
Install guide:
1. Install fastboot tools from google's sdk on your PC
2. Enter fastboot mode
3. Unlock your bootloader
4. Run "fastboot flash recovery imgfilename.img" in command line
5. Reboot and enjoy it
Download:
https://twrp.me/nubia/nubianx589j.html
Source code:
https://github.com/omnirom/android_bootable_recovery
https://github.com/TeamWin/android_device_nubia_nx589j
Created 2018-19-03

[RECOVERY] Pitch Black Recovery for Realme X [RMX1901]

Code:
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this project
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Prerequisites
1. Unlocked bootloader.
Bugs
1. No bugs
2. If you have found a bug, please consider posting it to my GitHub Issues.
Instructions
# Method 1 (Fastboot Installation)
1. Boot into fastboot mode by adb reboot bootloader or key combo, doesn't matter.
2. Download the twrp image following the link in the download section and transfer it to the adb folder (or add adb to PATH for universal access).
3. Open the cmd/terminal and change directory into the adb folder (or where you downloaded twrp image).
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug, linux users may need to change connection type to transfer files from charging only.
5. After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery <pbrp-recovery.img>
BooM ! PBRP flashed successfully.
# Method 2 (Zip Flashing)
1. If you haveany custom recovery(TWRP, Orange Fox etc.) installed in your device, then this is just a piece of cake.
2. Download & flash the zip from custom recovery install menu.
3. It will reboot to recovery automatically after that.
BooM ! PBRP flashed successfully.
Note: Flashable zip contains decryption patch, so you don't need to worry about encryption, you can check log right after flasing PBRP, there should be a string in green color confirming device encryption status.
Downloads
Both Image & Zip=> Here
XDA:DevDB Information
PBRP For Realme X, Kernel for the Realme X
Contributors
chankruze
Source Code: https://github.com/N00bTree/android_device_realme_RMX1901
Kernel Special Features:
Version Information
Status: Testing
Created 2019-09-20
Last Updated 2019-09-23

I cannot believe my eyes ! Thanks so much

No boot my phone..
How to flash...
Add Video..
Help me bro..