Related
Was on dirty unicon rom
Decided to revert to stock
flashed stock rom(provided by mr. mohsin)using sp tools v5.1352.01
flashed it in download mode..
Now phone not charging, not detected by pc, no battery icon when connected to pc/charger
Plz help
Any advice other than going to service centre..
can you at least turn on the phone? if not nothing can do other than going to the service center. but since your phone is rooted ,your warranty is already voided so you might have to pay for repairing.
sunny8p said:
Was on dirty unicon rom
Decided to revert to stock
flashed stock rom(provided by mr. mohsin)using sp tools v5.1352.01
flashed it in download mode..
Now phone not charging, not detected by pc, no battery icon when connected to pc/charger
Plz help
Any advice other than going to service centre..
Click to expand...
Click to collapse
you don't have to go to download mode to restore stock using sp flash tool right? I've done it without even turning on the phone. I think that's how you supposed to restore. Try like this: http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool if that doesn't work, you probably have to go to a service center.
Dhamithl said:
you don't have to go to download mode to restore stock using sp flash tool right? I've done it without even turning on the phone. I think that's how you supposed to restore. Try like this: http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool if that doesn't work, you probably have to go to a service center.
Click to expand...
Click to collapse
he said
"not detected by pc,"
so I don't think it would work if the phone isn't detected properly.
StormyKnight;5 9 31 47 26 said:
can you at least turn on the phone? if not nothing can do other than going to the service center. but since your phone is rooted ,your warranty is already voided so you might have to pay for repairing.
Click to expand...
Click to collapse
Can't turn on phone
Not detected by pc
Can the service center guys still detect that its rooted?
sunny8p said:
Can't turn on phone
Not detected by pc
Can the service center guys still detect that its rooted?
Click to expand...
Click to collapse
probably yes because when you rooted the phone the super user binary goes to /system/bin or /system/xbin folder
and it won't be deleted unless the phone is updated. so the best way is find someone who repairs the phone with jtag and then you can still keep your warranty.
Brought it back to life
Thanks a lottt guys for helping. ...
I'll sure find a guy who can work with jtag (might need that trick in future)
the only screw up I did was using older version of sp tools
I did the procedure again with v5.1424 and everything got back to normal. .:angel:
Can you help me out?
Can you help me out by telling me the procedure of how you did you turn your phone into life? Because I've same issue with my phone just like yours. So I need your help to turn my phone back into life. :crying:
sunny8p said:
Brought it back to life
Thanks a lottt guys for helping. ...
I'll sure find a guy who can work with jtag (might need that trick in future)
the only screw up I did was using older version of sp tools
I did the procedure again with v5.1424 and everything got back to normal. .:angel:
Click to expand...
Click to collapse
Will the latest version of Sp TOOL help in detecting my phone?
Just remove the battery and try to flash the stock rom through sptools
sunny8p said:
Brought it back to life
Thanks a lottt guys for helping. ...
I'll sure find a guy who can work with jtag (might need that trick in future)
the only screw up I did was using older version of sp tools
I did the procedure again with v5.1424 and everything got back to normal. .:angel:
Click to expand...
Click to collapse
my canvas a1 aq4502 is bricked. could you please help me. it keeps on connecting and disconnecting. therefore i am not able to use sp flash tool:crying:
sunny8p said:
Was on dirty unicon rom
Decided to revert to stock
flashed stock rom(provided by mr. mohsin)using sp tools v5.1352.01
flashed it in download mode..
Now phone not charging, not detected by pc, no battery icon when connected to pc/charger
Plz help
Any advice other than going to service centre..
Click to expand...
Click to collapse
install android one toolkit on your pc. then from there flash a custom recovery to your phone using adb. now download a stock rom and place it in your sd card. then flash the custom rom from custom recovery. i hope it will work.
---------- Post added at 01:58 PM ---------- Previous post was at 01:55 PM ----------
konankiakshay said:
my canvas a1 aq4502 is bricked. could you please help me. it keeps on connecting and disconnecting. therefore i am not able to use sp flash tool:crying:
Click to expand...
Click to collapse
install android one toolkit on your pc. then from there flash a custom recovery to your phone. now download a stock rom and place it in your sd card. then flash the rom from custom recovery. i hope it will work.
konankiakshay said:
my canvas a1 aq4502 is bricked. could you please help me. it keeps on connecting and disconnecting. therefore i am not able to use sp flash tool:crying:
Click to expand...
Click to collapse
I am in the same situation of connection and disconnection of my bricked mmx a26 to pc, have you found a way to get out of this? If yes pls. provide to help me
Bricked & USB not recognized
My micromax canvas a1 is bricked and tried flask it using sp flash 5.14 but the phone is not recognised in the flash
I have Canvas A1, it gets detected and SP starts flashing and completes it. Shows Green tick (ok) but the phone doesn't boot up. How the phone got bricked? Well one of my idiot friend tried flashing with SP flash tool, don't know what he did but after that my phone never booted up. The service centre told they don't have motherboard for the device available. Is there any way to fix it. Can someone please list down all the drivers that are needed, the ROM that has to be flashed and all the steps to take to fix the device. It would be really helpful for everyone who have their device bricked.
Sorry guys, noob here.
Started with the USB not being promptly recognized by my PC, but after some reconnections it worked.
So, one day ago, I installed TWRP via heimdall suite and flashed the last stable Cyanogenmod 12.1 for GT-N5100, following all the instructions. For my surprise, the tablet doesn't charge with any type of source. Tried lots of cables and adapters and nothing.
I returned to stock ROM, 4.4.2, but the same problem remains.
What I found is that somehow it start recharging when plugged for some time, but only some few %, and the tablet is readily recognized via USB when on download mode. So, it's not a hardware issue.
Someone, please help me.
crfiladelfo said:
Sorry guys, noob here.
Started with the USB not being promptly recognized by my PC, but after some reconnections it worked.
So, one day ago, I installed TWRP via heimdall suite and flashed the last stable Cyanogenmod 12.1 for GT-N5100, following all the instructions. For my surprise, the tablet doesn't charge with any type of source. Tried lots of cables and adapters and nothing.
I returned to stock ROM, 4.4.2, but the same problem remains.
What I found is that somehow it start recharging when plugged for some time, but only some few %, and the tablet is readily recognized via USB when on download mode. So, it's not a hardware issue.
Someone, please help me.
Click to expand...
Click to collapse
I think you have system corruption from kernels. I have experienced various issues around power with the note 8.0... all of which were from various kernel loads effecting low level device operation. Unfortunately there is no reset button or easy access to clean out the corruption.
You can remove the battery connection and wait a few minutes. Then connect and go into download mode and flash a stock rom. Then boot to setup and finalize your installation. Check and see if it will charge and properly function with power off and reboot options from the power menu.
If so flash a recovery, and wipe completly and flash your ROM of choice. If you choose a custom kernel outside of the ROM package, that may be done on top of the ROM load, to assist in a clean and trouble free ROM install.
gooberdude said:
I think you have system corruption from kernels. I have experienced various issues around power with the note 8.0... all of which were from various kernel loads effecting low level device operation. Unfortunately there is no reset button or easy access to clean out the corruption.
You can remove the battery connection and wait a few minutes. Then connect and go into download mode and flash a stock rom. Then boot to setup and finalize your installation. Check and see if it will charge and properly function with power off and reboot options from the power menu.
If so flash a recovery, and wipe completly and flash your ROM of choice. If you choose a custom kernel outside of the ROM package, that may be done on top of the ROM load, to assist in a clean and trouble free ROM install.
Click to expand...
Click to collapse
Tried exactly what you said: Opened it, removed the battery for a while, flashed the stock rom via Odin and factory reseted. Nothing changes.
Doesn't charge anyway. It's recognized when in download mode, though.
With 16% battery right now. If it drop to 0%, that means gameover? Or can i charge while on download mode (odin mode)?
Can't I flash TWRP and then install a custom kernel from there?
Thanks, dude.
I use Philz Recovery, as had issues with TWRP long ago and gave up once I tried Philz.
I would have done a full wipe and reset in philz.
You can charge in Philz and in Download mode, once you are able to get the phone to reset the power mode by the kernel flash.
One thing I think may be your issue... the USB connector may be bad. All you need is the voltage pin to go bad. Data will operate without voltage for powering the device.
Removing the USB board and lightly compress the top and bottom of the connectors frame, so that your cable end fits snug. Had to do that a few years ago when a cable end stretched it out after a few uses. Did not go back to using it again once I corrected the fit issue.
gooberdude said:
I use Philz Recovery, as had issues with TWRP long ago and gave up once I tried Philz.
I would have done a full wipe and reset in philz.
You can charge in Philz and in Download mode, once you are able to get the phone to reset the power mode by the kernel flash.
One thing I think may be your issue... the USB connector may be bad. All you need is the voltage pin to go bad. Data will operate without voltage for powering the device.
Removing the USB board and lightly compress the top and bottom of the connectors frame, so that your cable end fits snug. Had to do that a few years ago when a cable end stretched it out after a few uses. Did not go back to using it again once I corrected the fit issue.
Click to expand...
Click to collapse
Tried also, without response.
It really doesn't seem to be a hardware problem.
Right now I plugged into the charger and there you go: Charging!!
I don't know what I did different, but it's working, at least for a while. Probably it will not fully charge, but ok.
I remembered that, prior to flashing TWRP+CM12.1, I got constant pop-ups about Power Sharing. Reading some forums, some guys experienced the same problem with this feature and them their phones stopped charging. Some reported that a factory reset solved, which is not my case.
I will keep posting what I did and if I find something that solves, it may help someone who's stuck with the same error.
Anyway, thanks so much, gooberdude.
(And sorry for my lame grammar.. writing is much harder than reading and listening english)
having same issue tab not charging only showing in odin mode.. i even replace the usb port part still same situation.. going to flash stock rom hope this will work for me .. i am using cm13 on twrp 3.0..
no luck... even after flashing stock 4.4.2 tab is not charging not even in download mode... any suggestion please hlep..!!!
crfiladelfo said:
Sorry guys, noob here.
Started with the USB not being promptly recognized by my PC, but after some reconnections it worked.
So, one day ago, I installed TWRP via heimdall suite and flashed the last stable Cyanogenmod 12.1 for GT-N5100, following all the instructions. For my surprise, the tablet doesn't charge with any type of source. Tried lots of cables and adapters and nothing.
I returned to stock ROM, 4.4.2, but the same problem remains.
What I found is that somehow it start recharging when plugged for some time, but only some few %, and the tablet is readily recognized via USB when on download mode. So, it's not a hardware issue.
Someone, please help me.
Click to expand...
Click to collapse
Hi Noob,
Faced the same issue on N5100. Tries several fix but at last just flashed boefello kernel and the issue is fixed.
Kannanunnikrishnan said:
Hi Noob,
Faced the same issue on N5100. Tries several fix but at last just flashed boefello kernel and the issue is fixed.
Click to expand...
Click to collapse
Hello
My N5100 faces the same problem of charging as this thread.
Could you put in details about your status of N5100
- Your regional model: Ex: EU, America, Asia....?
- Your Tab is working fine until today, doesnt it?
- If it's working fine , what was ROM you are using currently?
- What did Recovery you use to flash ROM?
Thank you so much
Hello my tab has a charging problem too it started with not being recognised when I plug to my computer. When I plug to a power source it charges sometimes other times it just doesn't and I'm certain the charger isn't the problem
Hey. I am fresh user of LG devices, this is my first. Before i was using Galaxy Xcover 2 with no problems, easy ROM flashing etc., but now i have a big trouble. After flashing CM13 by CWM recovery, my phone flashed blue and now it does not response anything, including charger, pushing buttons, pulling baterry in and out, with charger or not. Only my PC in device manager can find it as QHSUSB_BULK. How can i recover my phone, i'll do anything to repair this myself.
Story350 said:
Hey. I am fresh user of LG devices, this is my first. Before i was using Galaxy Xcover 2 with no problems, easy ROM flashing etc., but now i have a big trouble. After flashing CM13 by CWM recovery, my phone flashed blue and now it does not response anything, including charger, pushing buttons, pulling baterry in and out, with charger or not. Only my PC in device manager can find it as QHSUSB_BULK. How can i recover my phone, i'll do anything to repair this myself.
Click to expand...
Click to collapse
Hello, I 'm in the same situation , same phone d722, wrong flash .zip , and same as you , when connected to the PC or to the current turns the screen 0 % battery on and off but I buy a new battery and the same. Someone knows?
At least i'm not alone <3
Maybe there is any ADB command able to repair this, but i don't know this. I am not a programmer, so anyone who is an code expert can explain this? Just give us instructions, please!
Well hello everyone i got a nearly new note 7 n930f with its box and all for about 130$ but the owner had let it update and now it only works while plugged to a charger, i tried getting into download mode while on charger but nothing happened just a black screen and sometimes it just boots up guess because the battery is at 0%.. i own a repair shop and i have a z3x box if nessecary.. i thought of opening it and charge the battery separatly or use s7 one but i really don't want to lose water resistance. But since i can get to use the phone i thought maybe i can root it using kingroot or sth and get system file and modify something so i can charge it a bit to get into download mode to flash twrp and costume rom but i'm not that good with sys files or mobile odin to downgrade to 30% battery firmware or sth.. i'm really stuck and i contacted samsung and they didn't want to take it back since it's purchased from another country (in europe)
Please anyone who has any solution help me.. i really love this phone and it was my dream phone when it launched
I did it guys, although no one has replied xD!.. after a lot of research, the way was to power on phone while on charger, check oem unluck then power off, plug usb into pc and do the download mode sequence 5 times with 3sec-1sec interval then flashed twrp and flash hydra kernel, it let it charge to 60%, after that anything can be done.. i'm on note fe oreo port btw!
Nebula.Inc said:
I did it guys, although no one has replied xD!.. after a lot of research, the way was to power on phone while on charger, check oem unluck then power off, plug usb into pc and do the download mode sequence 5 times with 3sec-1sec interval then flashed twrp and flash hydra kernel, it let it charge to 60%, after that anything can be done.. i'm on note fe oreo port btw!
Click to expand...
Click to collapse
How did you manage to check OEM. I can only get to download mode while charging and not through USB. My phone is not getting recongnized using USB. Pretty much stuck. Can you/someone help?
arunachudh said:
How did you manage to check OEM. I can only get to download mode while charging and not through USB. My phone is not getting recongnized using USB. Pretty much stuck. Can you/someone help?
Click to expand...
Click to collapse
I could turn on the phone only with original charger and waiting for about a minute then by going to recovery mode then select "reboot phone".. it boots up then go to developer mode and check oem unlock and flash twrp and no verity opt then hydra rom or something
I'm having similar problems, but mine won't go let me into the recovery menu. Does anyone have any useful tips for me? Can anyone elaborate on the concept of the 3-1 second thing? thanks in advance for all the help!
hello everyone, I tried to reinstall the official rom with an old version, the flash worked but since it restarts with a black screen only. I can't see the fastboot menu. I know it's under voltage, a usb computer sees it. Can you help me?
edemeule said:
hello everyone, I tried to reinstall the official rom with an old version, the flash worked but since it restarts with a black screen only. I can't see the fastboot menu. I know it's under voltage, a usb computer sees it. Can you help me?
Click to expand...
Click to collapse
Which version did u flashed?
If its below miui 9.5.19 then its a hard brick(considering ur arb index is 4,which is ofcourse)