Develop Bugs

Firmware upgrade encountered an issue Galaxy S3 (Sprint)

Hello all:
First I let me apologize for being a noob at this.
I had my my S3 for a month and I rooted myself 2 weeks ago. I'm having some issues now and I'm wondering if you guy and gals can help me?
Right now my phone has a screen up that says "Firmware upgrade encountered an issue. Please selected recovery mode in Kies & try again."
The top left of the phone says this:
ODIN MODE
PRODUCT NAME: SPH-L710
CUSTOM BINARY DOWNLOAD: Yes (5 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: Enable
Could someone please help me with this issue, maybe walk me through step by step. I already have Odin 3.04 downloaded and I don't know what to do to fix it.

You accepted on OTA while being rooted, correct? Never allow OTA updates while rooted, most custom roms block this for you, but stock rooted will allow OTA updates. You can try this toolbox, super simple, ODIN built in, puts your phone in download mode for you. BE SURE TO PICK SPRINT VERSION!
http://forum.xda-developers.com/showthread.php?t=1746680, Personnaly when I rooted, I deleted all Samsung apps, kies causes alot of problems IMO.
this message brought to you by my GalaxyS3 running Phantom's Blazer

joeyhdownsouth said:
You accepted on OTA while being rooted, correct? Never allow OTA updates while rooted, most custom roms block this for you, but stock rooted will allow OTA updates. You can try this toolbox, super simple, ODIN built in, puts your phone in download mode for you. BE SURE TO PICK SPRINT VERSION!
http://forum.xda-developers.com/showthread.php?t=1746680, Personnaly when I rooted, I deleted all Samsung apps, kies causes alot of problems IMO.
this message brought to you by my GalaxyS3 running Phantom's Blazer
Click to expand...
Click to collapse
yuuup, what JoeyD said...flash a custom rom that'll solve your problems...

Naddict said:
yuuup, what JoeyD said...flash a custom rom that'll solve your problems...
Click to expand...
Click to collapse
I guess i didn't finish my explanation, I should have said to use toolbox to flash a stock rom, since he don't have alot of knowledge of standalone ODIN or download mode:what:
this message brought to you by my GalaxyS3 running Phantom's Blazer

joeyhdownsouth said:
You accepted on OTA while being rooted, correct? Never allow OTA updates while rooted, most custom roms block this for you, but stock rooted will allow OTA updates. You can try this toolbox, super simple, ODIN built in, puts your phone in download mode for you. BE SURE TO PICK SPRINT VERSION!
http://forum.xda-developers.com/showthread.php?t=1746680, Personnaly when I rooted, I deleted all Samsung apps, kies causes alot of problems IMO.
this message brought to you by my GalaxyS3 running Phantom's Blazer
Click to expand...
Click to collapse
Thanks I hope it works for me. Just one question (again sorry, I'm a first timer)
All I have to do is hook my phone up to my computer then download the toolkit or what?

CrooklynMayoKMJr said:
Thanks I hope it works for me. Just one question (again sorry, I'm a first timer)
All I have to do is hook my phone up to my computer then download the toolkit or what?
Click to expand...
Click to collapse
yuup, you got it...

joeyhdownsouth said:
You accepted on OTA while being rooted, correct? Never allow OTA updates while rooted, most custom roms block this for you, but stock rooted will allow OTA updates. You can try this toolbox, super simple, ODIN built in, puts your phone in download mode for you. BE SURE TO PICK SPRINT VERSION!
http://forum.xda-developers.com/showthread.php?t=1746680, Personnaly when I rooted, I deleted all Samsung apps, kies causes alot of problems IMO.
this message brought to you by my GalaxyS3 running Phantom's Blazer
Click to expand...
Click to collapse
i didnt try to update OTA but i was trying to use ODIN to put a stock ROM back on and now im in a simular situation, i can get into download mode, i can get pretty far on the ODIN update but it always fails in the end
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_L710VPALEN_L710SPRALEN_618049_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> aboot.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Read ..
<ID:0/005> XmitData Fail..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and i can't get my phone to load. i have the GS3 tookit, but i dont know what im supposed to do to get my phone back up. if you could help id appreciate it alot.
oh and i seem to be able to get into system recovery and download mode but can't seem to figure out what to do with it. when i try to use the GS3 options it doesnt go pass the "waiting for USB debugging to be enabled" which i can't do becaue it wont load pass the SAMSUNG logo.

hmm i dont know what i did different. i really didnt do anything different. but somehow this time around it completed and passed. waiting now to see if it reboots completely...taking a while... and it started. WOW. wtf. well thanks anyways guys =/

Sorted!
I've been searching everywhere for a solution. Stupid Samsung and their Knox and their Kies (which fixes nothing)
I finally got it sorted!
1. Pull out the battery.
2. Reinsert the battery and force the phone into Download Mode. (Yes, I'm aware that the phone is unable to go anywhere else at this point; but when I fixed mine, I did it manually so that it displayed the Android droid logo, rather than the "Firmware upgrade encountered an issue..." message.
3. By now, you've probably tried every version under the sun. Try one more. It's an Odin package with the recovery image built-in. Assuming that you already have your Samsung drivers, download the executable from Step 3 of this guide: http://forum.xda-developers.com/showthread.php?t=2755793
4. Good luck! I'm just glad I finally fixed mine. Beware the OTA!

[Q] [HELP] installed setuidoff now stuck in stock boot

So i have a T-Mobile Galaxy S4 SGH-M919, and the story goes like this
so i decided to root it, and used CWM, and installed superuser. Superuser read that there was no binary, so i searched on forums to help me out. Someone said that installing MDB-setuidoff.zip would help, and now it is soft bricked, stuck on the Galaxy S4 logo reading
"Kernel Not Seandroid Enforcing"
So i figured, that it was a kernel problem, so i looked for the stock kernel, and upon attempted installation, CWM recovery said it was aborted and not installed. At this point i said screw it, and decided to try and unroot, but now using ODIN 3.07, using the stock tar.md5 from galaxys4root website
when i try to flash the PDA, it reads "FAIL" and an error
"<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)"
i can still reach odin, and recovery mode, but need help getting a working phone again. Completely out of ideas, maybe someone can chime in and help? I don't mind going back into stock unrooted state, or some kind of different root/rom as long as its stable. Help me get my phone back!
thanks in advance

Get the stock firmware from Sammobile . com
My S4 Is Insane
Deviant Team Member

The Sickness said:
Get the stock firmware from Sammobile . com
My S4 Is Insane
Deviant Team Member
Click to expand...
Click to collapse
do i have to be a premium member, or is something wrong with their site, it wont let me download the firmware, page just says "user is not a premium member"

thewrongkyle said:
do i have to be a premium member, or is something wrong with their site, it wont let me download the firmware, page just says "user is not a premium member"
Click to expand...
Click to collapse
Just register
My S4 Is Insane
Deviant Team Member

[Q] AT&T SGH-I747 Soft Brick Need Help!!!

I need help recovering my GS3, i tried using CF auto root to root my phone and i guess it didnt work because my phone doesnt boot past the samsung screen. I didnt have any custom recovery installed so i dont believe and thing was backed up. I am able to get into download mode and recovery mode. I tried flashing stock firmware using kies but it encounters a error saying its a problem with my phone, I tried using odin but it also gives me an error when flashing firmware saying
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_ATT_I747UCDLK3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
What do I do to fix my phone?

FuTuRisTiC Zo3 said:
I need help recovering my GS3, i tried using CF auto root to root my phone and i guess it didnt work because my phone doesnt boot past the samsung screen. I didnt have any custom recovery installed so i dont believe and thing was backed up. I am able to get into download mode and recovery mode. I tried flashing stock firmware using kies but it encounters a error saying its a problem with my phone, I tried using odin but it also gives me an error when flashing firmware saying
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_ATT_I747UCDLK3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
What do I do to fix my phone?
Click to expand...
Click to collapse
Ok I Installed Insecure Boot img via odin3 and my phone rebooted but now instead of it booting at the 1 second samsung screen it goes past it to the galaxy s 3 screen and just sits there. i also installed twrp, it let me mount everything but i cant u adb to push anything and it says i have no os installed. i dont know what moves to make anymore someone please help me out!!!

What version of Android did you have on your phone when it last worked, stock or custom ROM?

dawgdoc said:
What version of Android did you have on your phone when it last worked, stock or custom ROM?
Click to expand...
Click to collapse
its was a stock android rom i believe im not sure what version though.

Are you still able to get it into download mode?
Press and hold volume down + home + power at the same time

lemngo02 said:
Are you still able to get it into download mode?
Press and hold volume down + home + power at the same time
Click to expand...
Click to collapse
yes im able to go into download and recovery mode

lemngo02 said:
Are you still able to get it into download mode?
Press and hold volume down + home + power at the same time
Click to expand...
Click to collapse
oops didnt fully read your 1st post

lemngo02 said:
oops didnt fully read your 1st post
Click to expand...
Click to collapse
thats koo but the problem is i dont think my phone is rooted, i cant adb push using twrp cause my device wont show up when i adb devices

If you had the 4.3 bootloader on your phone, you cannot use Odin to flash a stock ROM.
Were you running the stock AT&T 4.3 ROM?

FuTuRisTiC Zo3 said:
thats koo but the problem is i dont think my phone is rooted, i cant adb push using twrp cause my device wont show up when i adb devices
Click to expand...
Click to collapse
Based on your Odin printout in the first post you were flashing a modified 4.1.1 kernel to install root. This should be fine if you were on either the 4.1.1 or 4.1.2 stock ROM. If you were on the 4.3 stock ROM your root attempt is probably the source of the problem.
IMPORTANT How to proceed from here depends on if you were on 4.3 or an earlier version of stock.
Also, since this forum is for AT&T and Canadian variants; I see the title of the first post says i747 - is this correct? It matters.

dawgdoc said:
Based on your Odin printout in the first post you were flashing a modified 4.1.1 kernel to install root. This should be fine if you were on either the 4.1.1 or 4.1.2 stock ROM. If you were on the 4.3 stock ROM your root attempt is probably the source of the problem.
IMPORTANT How to proceed from here depends on if you were on 4.3 or an earlier version of stock.
Also, since this forum is for AT&T and Canadian variants; I see the title of the first post says i747 - is this correct? It matters.
Click to expand...
Click to collapse
ok, not to jack his thread, but what if you are on the 4.3 bootloader? i didnt do what he did, but i am stuck in a similar situation. I am on the 4.3 bootloader, but i do have a custom recovery installed. problem is i get an error when i try to wipe. Ive tried flashing stock 4.3 rom via sideload in stock recovery, and modified rom though twrp. both roms install fine, but dont boot, but they do freeze in different points so i know something is being flashed. ive also tried wiping in cwm and stock. im bout ready to flash anything to this phone. oh and a nandroid restore fails after boot img flashes.

FuTuRisTiC Zo3 said:
its was a stock android rom i believe im not sure what version though.
Click to expand...
Click to collapse
From your message, you likely were on stock 4.3. Since you are able to get into recovery and download modes, you may try a restore via custom recovery. Please see the thread below on how to install custom recovery and do a stock restore ...
<http://forum.xda-developers.com/showthread.php?t=2658486>

fastludeh22 said:
ok, not to jack his thread, but what if you are on the 4.3 bootloader? I am on the 4.3 bootloader, but i do have a custom recovery installed.
Click to expand...
Click to collapse
I would then link you to the same thread Larry2999 provided.

dawgdoc said:
I would then link you to the same thread Larry2999 provided.
Click to expand...
Click to collapse
thanks. i had found that thread right after i posted. lets hope. its halfway downloaded. if that doesnt work,ill be posting a thread about the weird way i ended up here and detailed report of what i did and what ive tried...

dawgdoc said:
Based on your Odin printout in the first post you were flashing a modified 4.1.1 kernel to install root. This should be fine if you were on either the 4.1.1 or 4.1.2 stock ROM. If you were on the 4.3 stock ROM your root attempt is probably the source of the problem.
IMPORTANT How to proceed from here depends on if you were on 4.3 or an earlier version of stock.
Also, since this forum is for AT&T and Canadian variants; I see the title of the first post says i747 - is this correct? It matters.
Click to expand...
Click to collapse
audit13 said:
If you had the 4.3 bootloader on your phone, you cannot use Odin to flash a stock ROM.
Were you running the stock AT&T 4.3 ROM?
Click to expand...
Click to collapse
Yes the phone is AT&T and more than likely it was on 4.3 now what do i do

never mind folks i got it up and running my only option was to use the sd card so i found my adapter and fixed it. im on 4.1.2 now its updating software now im guessing to 4.3. thank you guys for all the help

FuTuRisTiC Zo3 said:
Yes the phone is AT&T and more than likely it was on 4.3 now what do i do
Click to expand...
Click to collapse
Before doing anything else, boot into recovery. If you are on a stock recovery the very first line will tell you that the system recovery is 3e
If you have one of the custom recoveries it will be different. If you have one of the custom recoveries, TWRP or CWM, you can use the link Larry299 posted earlier in this thread to restore your phone. If you are on the stock recovery and the 4.3 bootloader I don't know what to suggest.

dawgdoc said:
Before doing anything else, boot into recovery. If you are on a stock recovery the very first line will tell you that the system recovery is 3e
If you have one of the custom recoveries it will be different. If you have one of the custom recoveries, TWRP or CWM, you can use the link Larry299 posted earlier in this thread to restore your phone. If you are on the stock recovery and the 4.3 bootloader I don't know what to suggest.
Click to expand...
Click to collapse
I got everything back to normal im rooted on 4.1.2 and have a pending up date, is it safe for me to update via software updater or do i have to do something else

FuTuRisTiC Zo3 said:
I got everything back to normal im rooted on 4.1.2 and have a pending up date, is it safe for me to update via software updater or do i have to do something else
Click to expand...
Click to collapse
There is a chance that being rooted will prevent you from using the OTA official update. I've seen reports of people being able to update to the official 4.3 while rooted, but I've also seen reports of people not being able to update.
Before you make that update, bear in mind that the official 4.3 bootloader, its name ends in MJB, is the one that will prevent you from ever going back to an older bootloader. Some of the devs and the more experienced on here have no problem with that. Others do consider it an issue. An alternative is to install the leaked 4.3 bootloader, it's name ends in MJ2. That bootloader will allow you to downgrade to the 4.1.1 or 4.1.2 bootloaders, or so I have read. There is information about this in the development and the general forums for our device.
To muddy the waters more; if you intend to sim unlock your device without gettings codes from your carrier you need to do it from the 4.1.1 official ROM. A point you can not return to from the official 4.3 ROM, or so I've read.

I am having a huge booting issue with my Samsung Galaxy S3. Its a brand new one and I tried rooting it but it gave me this error:
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can get to download mode, but not recovery nor does it boot into the Android OS. I tried putting back the stock OS and it gave me this error:
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried follow a bunch of these threads, but I can't seem to resolve my issue yet. I probably have that 4.3 bootloader which screwed everything up. Can someone help me resolve my issue? I literally got this phone today from AT&T. Thank you.

[Q] Unable to flash back to stock UCAMA4

I have been running a rooted version of 4.3 (UCUBMK6) with TWRP recovery for some time, and want to do the OTA update to Kitkat. So I'll need to bring it back to stock first. I ran TriangleAway and rebooted to download mode afterward. Then I followed THIS guide to flash back to stock ROM 4.2.1 "KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar.md5".
I tried several times with Odin 3.07, but every time it fails:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I then went back into download mode and flashed the rooted UCUBMK6 ROM, which works just fine (and also took it back from TWRP to stock recovery).
Does anyone have any idea how I can get it back to a stock, unrooted ROM, so that I can run OTA? Thx!

mobidutch said:
I have been running a rooted version of 4.3 (UCUBMK6) with TWRP recovery for some time, and want to do the OTA update to Kitkat. So I'll need to bring it back to stock first. I ran TriangleAway and rebooted to download mode afterward. Then I followed THIS guide to flash back to stock ROM 4.2.1 "KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar.md5".
I tried several times with Odin 3.07, but every time it fails:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I then went back into download mode and flashed the rooted UCUBMK6 ROM, which works just fine (and also took it back from TWRP to stock recovery).
Does anyone have any idea how I can get it back to a stock, unrooted ROM, so that I can run OTA? Thx!
Click to expand...
Click to collapse
what bootloader are you running , also this ( http://forum.xda-developers.com/showthread.php?t=2589891 ) is a great thread and may help you make sure u read second or third post i dont remember witch . also ( http://forum.xda-developers.com/showthread.php?t=2581321 )

I tried to do the same for the update to kk. 3.09 said pass but bootlooped. Had to use 1.85, now on kk. Good luck.
Sent from my Note 3...making all others drool!

mobidutch said:
I have been running a rooted version of 4.3 (UCUBMK6) with TWRP recovery for some time, and want to do the OTA update to Kitkat. So I'll need to bring it back to stock first. I ran TriangleAway and rebooted to download mode afterward. Then I followed THIS guide to flash back to stock ROM 4.2.1 "KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar.md5".
I tried several times with Odin 3.07, but every time it fails:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I then went back into download mode and flashed the rooted UCUBMK6 ROM, which works just fine (and also took it back from TWRP to stock recovery).
Does anyone have any idea how I can get it back to a stock, unrooted ROM, so that I can run OTA? Thx!
Click to expand...
Click to collapse
Follow this. http://forum.xda-developers.com/show....php?t=2618447 .
I followed sections all sections 1 threw 3. At section 2 the link for the I317UCUBMK6-TZ-PARAM.zip did not work. I used this link instead.
http://www56.zippyshare.com/v/16559598/file.html
At section 3 don't be alarmed when it says it's downloading the update but it doesn't show percentages. It is downloading. In fact for me it automatically downloaded the 4.4.2 update instead of 4.3. It skipped it and went straight to kitkat. It took some time but I have Official KItkat 4.4.2.
Hit Thanks
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
---------- Post added at 12:08 AM ---------- Previous post was at 12:07 AM ----------
djbrian52 said:
I tried to do the same for the update to kk. 3.09 said pass but bootlooped. Had to use 1.85, now on kk. Good luck.
Sent from my Note 3...making all others drool!
Click to expand...
Click to collapse
Whate are you talkin about 1.85? Instead of 3.09?
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

You mentioned that you used Odin 3.07. I used 3.09 with no success. Had to use version 1.85.
Sent from my Note 3...making all others drool!

djbrian52 said:
You mentioned that you used Odin 3.07. I used 3.09 with no success. Had to use version 1.85.
Sent from my Note 3...making all others drool!
Click to expand...
Click to collapse
Lol i didnt even know 3.09 was out i just have it saved on my pc & just always use 3.07 works perfect
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

help me pls
06SilveradoZ71 said:
Follow this. http://forum.xda-developers.com/show....php?t=2618447 .
I followed sections all sections 1 threw 3. At section 2 the link for the I317UCUBMK6-TZ-PARAM.zip did not work. I used this link instead.
http://www56.zippyshare.com/v/16559598/file.html
At section 3 don't be alarmed when it says it's downloading the update but it doesn't show percentages. It is downloading. In fact for me it automatically downloaded the 4.4.2 update instead of 4.3. It skipped it and went straight to kitkat. It took some time but I have Official KItkat 4.4.2.
Hit Thanks
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
[SIZE=hi, my note 2 i317 got stuck on samsung logo & cnt get it to recovery mode. as i told that i need to flash the param files but the files that is link on the thread doesn't work. & you mention about the link that works. well i click it & it says files doesnt exist. do you think you can help me find a link or if you have the files that i needed. thank you so much
Click to expand...
Click to collapse

[Q] Flashing stock n7100 Rom via Odin failed. Need help!!

My n7100 got soft brick out of blue. it kept stuck on Logo and there was no way to make it to main menu. anyways i tried to flash stock rom that I found online and it gave me fail!, When I ran it again it stoped showing logo. instead it keeps showing update failure messege. any ideas how to fix it please
I have been running stock rom, never tried to root it and i have decent knowledge in using odin (I've done rooting and flashing roms many times before with my previous devices)

Mohammed Al Jubouri said:
My n7100 got soft brick out of blue. it kept stuck on Logo and there was no way to make it to main menu. anyways i tried to flash stock rom that I found online and it gave me fail!, When I ran it again it stoped showing logo. instead it keeps showing update failure messege. any ideas how to fix it please
I have been running stock rom, never tried to root it and i have decent knowledge in using odin (I've done rooting and flashing roms many times before with my previous devices)
Click to expand...
Click to collapse
this is what i get with odin
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

I think you mesed up partition with some rom,so now you must flash with pit ,but dont lisent to me wait for someone who knows. I have this situation with mu sgs2 and i must to replace morherboard.
Sent from my GT-N7100 using XDA Free mobile app

when i run the device now the screen goes all white
i still can get easily to download mode with no issues

Help me guys

???

Try mskips toolkit from skipsoft.net. It has a recovery package that should fix your pit
Sent from my SM-G900F using Tapatalk