Related
Hello,
The screen of my moto 360 goes randomly off and vibrates at that moment, just like when you dim the screen with your hand., but now I'm using it. It's very frustrating because I can't even open an app normally or the screen goed of and I need to start over again. Does anyone know how to fix this?
Having same issues with mine.
Really strange and really annoying. Its like when u cover it with palm. It vibrates and screen goes off but ur in the middle of trying to do something. Anyone else having this problem?
Glad I'm not the only one having this issue, just got my Moto 360 today. I'll be in the Settings or other parts of the watch and it will just randomly turn off. It is really frustrating to deal with.
I have the same issue. I have pretty hairy arms so I wonder if the hairs are somehow triggering the capacitive touch screen.
you guys try to do a reset on the watch yet?? not just a reboot..
Any updates on this? I'm having the same issue
Any updates? I have the same issue I think it happend after udate to 5.0.2 but I'm not sure.
I'm also having the same problem. I picked up a new Moto 360 during the BBY sale rush of the last couple of days. At first it was buggy but the screen seemed to stay on while working with it. Then it had a system update, and since then most bug issues (like the faces not updating with the companion app changes) went away, however from that point the screen constantly shuts off, usually with a little buzz, while I'm interacting with the watch.
For instance, regarding the sensor used to turn off the watch if you palm it. I thought maybe that was it, so I was looking for a way to turn that off. I went into settings, and spend about 10 times of the screen shutting off before I could get to "accessibility settings" just to see if that might be there.
This problem occurs whether I'm wearing the watch or not (trying to eliminate arm hair or similar), and has occurred after a factory reset and re-pair with my phone (Note 4). Ambient sensor settings don't help, because all that does is make the screen go dark instead of off, but it still reverts back to the clock no matter what I was doing.
Any ideas? Any way to turn off a sensor perhaps, maybe in a custom ROM? Since this seems to be associated with an update near as I can tell, I wonder if a fix is coming from Moto or if it's too rare of an issue to be on their radar.
As an update, I replaced the watch with a new one, and this new watch is perfect. It started on outdated software which I left on for a bit to make sure it didn't show the problem, then I updated. Still no issues. I think there is a chance the problem is software regardless, but either way it must be a small portion of watches and isn't necessarily tied to any particular outside software influence (phone model or android version, or installed apps as NONE of those things changed). My advice to people reading this thread is to exchange the watch or get an RMA if possible.
Same Issue
Hi All,
I have the same issue. Sent it back for repair so let's see...
Same issue here as well
So I did a bunch of searching and either I am in the wrong place, or no one else seems to have this problem, but I am seeing the same notifications showing up on my Moto 360 over and over even after I dismiss them. For example, I will get the Google Now scores for sports events (some for teams I couldn't care less about) popping up over and over and over again even after I swipe them away. They are not even real notifications on my phone - so not sure why they are popping up in the first place. Any help would be GREATLY appreciated.
You have to go into Google Now on your phone and configure the card settings there. Should be options to no longer see cards you're not interested in, or tweak their content. Otherwise it will periodically update phone & watch with cards - this is just how the service works.
Personally I leave it turned off completely as the benefits are meagre vs demands it makes on phone & watch power. There are more efficient ways of keeping yourself updated on the info you need when you need it, IMHO.
ghtop said:
You have to go into Google Now on your phone and configure the card settings there. Should be options to no longer see cards you're not interested in, or tweak their content. Otherwise it will periodically update phone & watch with cards - this is just how the service works.
Personally I leave it turned off completely as the benefits are meagre vs demands it makes on phone & watch power. There are more efficient ways of keeping yourself updated on the info you need when you need it, IMHO.
Click to expand...
Click to collapse
Thanks for the reply. So even if I dismiss the notification on the watch, and there is NO notification in the notification tray on the phone, it is expected that I still constantly receive card notifications on the watch? That seems broken to me...
gjlowe said:
Thanks for the reply. So even if I dismiss the notification on the watch, and there is NO notification in the notification tray on the phone, it is expected that I still constantly receive card notifications on the watch? That seems broken to me...
Click to expand...
Click to collapse
next time i notification comes up...leave it alone and go to google now on your phone.. look for that card and there should be an option to no longer show this notification..
bustanut666 said:
next time i notification comes up...leave it alone and go to google now on your phone.. look for that card and there should be an option to no longer show this notification..
Click to expand...
Click to collapse
Ok, I got that, but again, my problem is not that the initial notification shows up, it's that once I swipe it away it keeps coming back. I suppose that's an issue with Google Now though and not the watch.
You are not alone.
I'm having the same issue.
Moto 360 4.4W.2 - Wear Mini Launcher
Moto X (2013) 4.4.4 - Google Now Launcher.
I'm almost certain that those launchers are doing it. Days ago I had a friends's birthday notification poping over and over again, it would back to my watch face in like 5s after I had it dismissed, when i remove wear mini launcher all that stoped.
Today I installed it again, just for sake of testing, since is a very helpful software. The problem started again, but now with a amazon delivery notification, so im uninstalling it.
Wakuni said:
I'm having the same issue.
Moto 360 4.4W.2 - Wear Mini Launcher
Moto X (2013) 4.4.4 - Google Now Launcher.
I'm almost certain that those launchers are doing it. Days ago I had a friends's birthday notification poping over and over again, it would back to my watch face in like 5s after I had it dismissed, when i remove wear mini launcher all that stoped.
Today I installed it again, just for sake of testing, since is a very helpful software. The problem started again, but now with a amazon delivery notification, so im uninstalling it.
Click to expand...
Click to collapse
Sorry to rehash an old topic, but I'm having the same issue..
The card in question is to do with sport, and I do want to see the card so turning off isn't an option, but when I swipe it away I don't want it to come back!
Anyone found a solution?
Tripledrop said:
Sorry to rehash an old topic, but I'm having the same issue..
The card in question is to do with sport, and I do want to see the card so turning off isn't an option, but when I swipe it away I don't want it to come back!
Anyone found a solution?
Click to expand...
Click to collapse
Nope, it's the way Google Now does sport cards -- if a game is in progress, it sends you constant updates. Even if you swipe the update away, the next time anything changes, it'll just reappear, until the game / match is over (once you swipe away the card for a completed game it stays away, for me). I wish Now was more customizable.
thebobmannh said:
Nope, it's the way Google Now does sport cards -- if a game is in progress, it sends you constant updates. Even if you swipe the update away, the next time anything changes, it'll just reappear, until the game / match is over (once you swipe away the card for a completed game it stays away, for me). I wish Now was more customizable.
Click to expand...
Click to collapse
I don't mind if the game is still on, that makes complete sense, this is after the game...
Tripledrop said:
I don't mind if the game is still on, that makes complete sense, this is after the game...
Click to expand...
Click to collapse
Actually having exactly the same problem and it is specifically with sports cards. LG G3 (Verizon) 5.1 and G Watch R. I'll swipe a sports card away (last game score, next game time, etc.) and it will be back within a few minutes. Very irritating.
Just wanted to start a thread to discuss this device. For those not familiar with it, it's a very inexpensive 11.6" laptop that runs RemixOS 2.0 from the factory. It does NOT have a touchscreen and the display is a low resolution (1366x768) TN panel display. The CPU is an Allwinner A64 Cortex A53 quad-core 64-bit processor.
The device I purchased (via their Kickstarter campaign) has 2gb RAM and 32gb storage - and it costs me $89.
Some interesting things I've found so far...
1. To disable the damn "click" sound every time you select something (via the touchpad or a mouse), download the QuickShortcutMaker application from the play store. Then expand the Settings items under the Activities section and find the "Other Sounds" activity. Once you click on the Other Sounds activity, click on "Try" on the right-hand side - this will open the "Other Sounds" dialog where you disable "Touch Sounds"! You can also disable some other sounds here. No idea why Remix doesn't allow access to these sound options. Explore the other Settings activities - there are some other cool things you can do. I also used this app to create "Shortcuts" to specific forums in Tapatalk (something that you do via widgets in standard Android). This QuickShortcutMaker app is pretty damn useful on this device!
2. I've found that I was able to connect my Apple USB->Ethernet adapter to this device and it works! However, it doesn't seem to work with ALL apps. For example, Tapatalk doesn't work with it for some reason - but so far, every other app has worked. You can also access ethernet settings via the QuickShortcutMaker app mentioned above.
3. Enable "Experimental Features" by clicking on the "Kernel Version" section of Settings->About. Once you do this, enable the "Use mouse wheel to simulate swipe gesture". This allows you to zoom in and out of things like web pages, images, etc. To do this, hold down CTRL+ALT while moving the mouse wheel. Apparently, the touchpad on this device does NOT provide pinch-to-zoom functionality, so without this setting, there is no way to zoom in and out in most apps! Kind of a big issue! Unless there is another way that I just don't know about. I know you can CTRL- and CTRL+ to zoom in and out in web pages, but that really just increases the size of the text - not really a true zoom in/out.
4. Gmail app. If you open the Gmail app as a window, you don't get the "split-screen" that you get if you open the app in full screen. But if you open in as a full-screen window and then "restore" it to a smaller window, the split-sceen function still works. I usually just leave Gmail minimized in order to keep the split-screen function active for Gmail.
5. Sometimes, the screen comes back on if you put the device into standby with the power button and then close the lid. I haven't been able to find the exact circumstances where the screen comes back on when closed, but it seems that when it does come on when it's closed, it stays on! Need to figure out why this occurs..
6. Bottom of device gets REALLY hot after any extended use. May be a long-term issue...
7. By default, wifi is set to turn off when in standby (unlike tablets) - unless the device is plugged in - then wifi will stay on. This can all be changed under Settings->Wifi->Advanced. I actually set mine to always turn wifi off when in standby since it seems that the device doesn't actually work while in standby anyway (again, unlike tablets). May help avoid wifi failure over the long-term.
8. I have run into websites (such as microcenter.com) where when you open a drop-down list, there is no way to "scroll" the list if it goes off the screen. To see what I mean, go to microcenter.com and try to set the store location - it opens a drop-down list that goes off the screen and there is no way to scroll down in the list! The "work-around" is to use the down arrow key, but it doesn't work very well (web page wants to update every time you press the down arrow)....
That's about it off the top of my head... It's a shame that this device cannot upgrade to RemixOS 3.0, like was stated in the kickstarted campaign (and later "retracted").
Anyone know how to root this thing?
It's an interesting device for the cost, but what I *really* want is a similar, large'ish device with a higher-quality, higher-resolution touchscreen that is removable from the keyboard - with at least 2gb of RAM (10" and 1gb of RAM isn't enough for RemixOS!) and runs RemixOS 3.0 - so far, I can't seem to find such a device...
Sent from my A1160 using Tapatalk
I got the same model 2GB w/32GB storage. Do you or anyone know how to get it to charge and or power on. Mine only worked for 2 days, now nothing. I contacted Azpen over a week ago about it and still haven't heard from them. Please help.
Cerealius said:
I got the same model 2GB w/32GB storage. Do you or anyone know how to get it to charge and or power on. Mine only worked for 2 days, now nothing. I contacted Azpen over a week ago about it and still haven't heard from them. Please help.
Click to expand...
Click to collapse
I just plugged mine in and it charged fine (blue LED next to charging port turns on when charging and turns off when fully charged).
To turn mine on, I just held down the power button on the keyboard for a while... You can also fully power it off that way as well (if it gets hung or something, which I have managed to do a few times now).
I've *really* put this thing through it's paces over the last few days. Overall, it's a decent device for the price. Personally, I'd rather spend a little more for one with a better, higher-res, removable touchscreen though.
I also have a HP Slatebook 10 x2 - and it's a great device, but stuck on Android 4. Otherwise, it has a MUCH nicer, removable touchscreen and even an extra battery in the keyboard (that charges the tablet when attached). Just wish it was a little bigger (13" or so) and was running Remix OS.
But, for $89, I can't complain, my A1160 actually runs pretty well for what it is...Luckily, I haven't had any issues with mine.
Sent from my HP SlateBook 10 x2 PC using Tapatalk
Hello...
@jtrosky, thanks for starting this thread, i've already gotten something out of it... getting rid of that damn clicking every keypress.
It was also nice to find that quickshortcutmaker, thats really a cool app that seems to allow more access than I could find...
Everyone else, hello!
I am an PC user since 84' and an Apple iPad user since, well the day the ipad 2 came out and now I'm on the iPad now. The only reason I say any of this is because the reason I got this Azpen A1160 was to help learn a bit about android and linux. I would also like to figure out how to get to the root...
Knock on wood but I got this three days ago and have literally beaten the software out of it loading, looking, deleting, and I thought I had screwed it up several times but it just keeps on ticking. The back does get a little warm, I haven't actually measured it yet but I'm going to, but I dont think it's too bad. I've run six full charges on battery and worked on it plugged in. (which it doesn't seem to like)
I'm happy with it right now and I think its going be a fun ride. I bet this is going to be a fun place to be in the next couple of months...
Buddy
Oh - one more thing I found out - and this may be well known already for those more familiar with RemixOS. If you click and hold on the little icons on the bottom-right of the taskbar, you can move them around. So, for example, you can make it so the brightness, volume, bluetooth and wifi icons are always visible, even when that section is "collapsed"...
Also - I *love* having the key to disable the touchpad (the key next to the arrow keys). Since I usually use a bluetooth mouse, it's so nice being able to disable the trackpad so quickly and easily!
Oh - and the Prtscr button on the keyboard brings up the very cool screen capture tool, which let's you select what area of the screen to capture. Very handy tool!
Still not sure what the "Pausc" button does - I'm assuming it's actually a misprint and it's supposed to say "Pause". Gotta love cheap electronics that are made in China!
So far, this device is definitely working well for me. Although, I'm not so sure the screen is big enough to truly take advantage of the RemixOS windowing capabilities... But, it's still better than not having any windowing capabilities.
Sent from my A1160 using Tapatalk
One more quick tip - there are apps out there that will let you boost the volume of the device. Right now, I'm using Music Volume EQ to boost the volume, but there are probably better apps out there for this purpose... Will explore more later and post an update if I find a better app.
Sent from my A1160 using Tapatalk
Hello guys, thank you for creating this thread.
Did anyone have any issue by setting up a password for the lock screen?
I did, and it worked for a couple of times, then it started not to recognize the password (password was correct, no caps lock...). Of course it didn't work after reboot as well.
The only option was to remotely reset the device using the google's tool from another pc. Very annoying. Since then never tried to set another security system for the screen lock.
I'm also getting an a problem after turning off the screen: when I try to turn it on again, most of the time I get a blank screen. I have to try several times to get back to remix os.
Did anyone faced this issue as well?
Regards
sephitoor said:
Hello guys, thank you for creating this thread.
Did anyone have any issue by setting up a password for the lock screen?
I did, and it worked for a couple of times, then it started not to recognize the password (password was correct, no caps lock...). Of course it didn't work after reboot as well.
The only option was to remotely reset the device using the google's tool from another pc. Very annoying. Since then never tried to set another security system for the screen lock.
I'm also getting an a problem after turning off the screen: when I try to turn it on again, most of the time I get a blank screen. I have to try several times to get back to remix os.
Did anyone faced this issue as well?
Regards
Click to expand...
Click to collapse
I have not tried setting up the lock screen (I just leave mine unlocked). And no, I have not had any issues with a blank screen when turning the device back up. What's strange is that the device does not automatically turn on when opening the screen - at least not on my device - I have to press the power button.
Your issues are probably because of the poor quality control with these device. Somehow, I lucked out and got a "good one", but many people seem to be having build-quality issues with them...
Sent from my A1160 using Tapatalk
Great posts and many thanks to the OP.
I got a US 2 pin power plug instead of a UK plug. Does anyone know of a similar products power lead that will fit our A1160?
Need help...
Hi,
First, thanks for creating this thread and posting your tips. Obviously there are not a lot of people using this device yet so it is great to find useful info on it.
Since there is no known root solution yet, I tried installing NetGuard as an adbllocking solution that does not require root. I have used it before without any issues. Unfortunately, on the Azpen, every time that I enable it, it blocks all internet access (it is obviously not supposed to do that). I even tried alternative apps like AdClear and got the exact same result. There is something strange going on with the Azpen. I would really appreciate it if anyone had any pointers as to how I could resolve this.
Thanks...
Welp! I had much higher hopes for this device and I haven't even received mine yet! Will this be rootable?
Thanks for creating this, used both your sound clicking tip and the pinch to zoom in. A bit annoying having your fingers in multiple place to zoom in, but what can you do? I'm a college student and have found that I can't access the net with this device due to it's mac address changing each time. I'm not sure if anyone else has noticed this or if mine is the only one. Just thought I would share that.
HyugaSho said:
Thanks for creating this, used both your sound clicking tip and the pinch to zoom in. A bit annoying having your fingers in multiple place to zoom in, but what can you do? I'm a college student and have found that I can't access the net with this device due to it's mac address changing each time. I'm not sure if anyone else has noticed this or if mine is the only one. Just thought I would share that.
Click to expand...
Click to collapse
That is *really* interesting! Sure enough, if I disable and re-enable the wifi, the MAC address does change!! That makes absolutely no sense - I've never seen such a thing!
I'll look into that a little more - but without root, I doubt there is anything that can be done about it. So strange!
One possible option - set wifi to stay enabled all of the time - maybe that way the MAC will stay the same. You can set that in the wifi settings advanced options. I've found that you have to reboot after setting it to always stay active....
Sent from my A1160 using Tapatalk
So far I have been impressed for the cost of this unit. I have a few concerns and wanted to see if anyone had input:
1. Since the length of the power chord is so short. Is it possible to use a USB to Barrel jack type of adapter to power this? That way you can attach to a portable power bank?
2. battery power, I find it to not last that long and I find it takes forever to charge. I thought that this would last 5-7 hours unplugged, nope. It was supposed to charge within in a hour, nope. Any ideas on this?
I use an external mouse and click on the trackpad disable button. I find it much easier to use the computer when typing.
I'm looking at Pinebook, a notebook having the same AllWinner processor (CortexA53).
It seems this notebook can run all OSs suppoted by Pine64, such as Android, some linux distro, Windows IOT and they are working on a Chroimum porting (try to have a look at the pin64 forum).
Do you think it would be possible to do the same with A1160 ?
Another solution could be PhoenixOs (as pointed out in some comment on Kickstarter).
There are already some devices with CortexA53 processor running PhoenixOS out of the box.
I honestly don't know what OS's can be ported over to this device yet. I have a feeling that it's never going to have a huge user base though, so I wouldn't expect much from the developers out there.
Now that Chromebooks can run Android apps, this device just isn't quite as interesting as it once was. Basically, you can now get an inexpensive, *high quality* Chromebook and still have most of the advantages of this device, plus the high quality and frequent updates part.
To be completely honest, I have very low expectations for this device in the long-term. With how hot it gets after any real usage, I expect the mainboard to fail in short order. We'll see. Although, so far, I've really been using it pretty heavily and it does seem to be holding up, but it's only been about a week....
Sent from my A1160 using Tapatalk
Something else I recently noticed - and this may already be a well-known thing with RemixOS... If you close an app by clicking the back arrow on the top-left of the window, you continue to get notifications for that app. But if you close it by clicking the "X" in the top-right of the window, it seems to completely the kill the process and you no longer receive notifications (or if it's an app that stays around and puts a "permanent" notification in the notification tray, the "x" seems to completely stop the app as well and removes its notification item).
At least that's what seems to happen...
Also noticed that even if you setup wifi to stay active even with power off, the unit eventually goes into a "deep sleep" where you will no longer get new email notifications, etc. It even seems to turn wifi off after a while (even though it's set to stay on all of the time).
Lastly, if you have an external mouse connected, close the laptop lid and then move the mouse, it turns the screen back on - even while closed!
Sent from my A1160 using Tapatalk
Hi All,
Saw this in the comments and thought I would chip in with my experience so far.
I got the 64GB version and so far it is the computer I have paid for.
The track pad as everyone said is very crappy, but I just use an external mouse instead so its not a big problem.
I seem to have a good unit and don't have any problems with the unit.
My only gripe is that the battery kinda sucks and after using it intensive for like 3-4 hrs, it will have almost no battery. I wish it came with my UK adapter instead of the US one, but its okay.
Furthermore, is there anyway to put widgets on it? or Use another launcher?
Has anyone tried to root it or tried to install another OS on top of it? I heard that PhoenixOs is possible?
MindlessManiacs said:
Hi All,
The track pad as everyone said is very crappy, but I just use an external mouse instead so its not a big problem.
Furthermore, is there anyway to put widgets on it? or Use another launcher?
Has anyone tried to root it or tried to install another OS on top of it? I heard that PhoenixOs is possible?
Click to expand...
Click to collapse
For what it's worth, my trackpad actually works really well. I was surprised to read all of the complaints about it. I'm guessing that a lot of them are defective?
Regarding the widgets, no - there is no way to use Widgets in Remix OS 2.0 (not sure about 3.0), which is a huge limitation. Widgets are one of the things that make Android so powerful - and I miss them big time in Remix OS...
I too would like to know if there is a way to load PhoenixOS on this device. I thought I saw it mentioned somewhere that it would be possible (maybe one of the updates on Kickstarter?). I will see if I can email Azpen about this. RemixOS 2.0 is really good, but not quite "finished" in my opinion...
Sent from my A1160 using Tapatalk
Hi! Does somebody receive a blank white screen when laptop booting or waking up?
Every time when I push power button I get a blank white screen... How I can fix it?
It has been a month since I got the PD.
Some brief thoughts based upon my experience with the phone.
I was an Apple user since they launched the iPhone in 2007. Nothing to do with the perpetual Apple vs. Android debate, just iOS suited my purposes, that's all.
I was using the HTC 10/BB DTEK50/Priv for a while, as a second phone.
I got fairly used to the operating system and to be honest, they are all very similar. But carrying 2, sometimes 3 phones was becoming a right pain, so looked for a good dual sim phone that would run two What's app accounts simultaneously.
Enter the PD. Easily love at first sight. I said this was my "jumping off point".
Wasn't very easy to get hold of, where I live, so had to wait almost a month and PAID-A-LOT-!! LOL
What a truly beautiful phone. I have used every Apple phone ever made, every BB phone made, 2 Vertu's (UGHH), and hand on my heart can say, I still cannot stop looking at it.
I had a major issue after setting it up, which is discussed in another thread.
I had no home screen icons or apps visible, only a blank screen that allowed calls and messages to come through in the status bar, could enter settings, but that was it.
The eventual solution, after almost suffering a heart attack, was to load both sims in, and then ejecting the sim tray. The apps just popped up instantly. Very strange, indeed.
After that, everything has been super easy.
-Stellar Battery (and I am a heavy user)
-2 whatsapp accounts running - awesome.
-What a lovely screen!
-No complaints with the camera. I like it. Even the slightly synthetic "Leica" look in the Wide Aperture Mode.
-The Fingerprint sensor is absolutely instant.
-EMUI is easy and nice to navigate
-The ability to edit the quick launch(?) icons in the pull down menu is excellent.
Now the bits that are bugging me.
1) No firmware updates. The last one was, I believe, in December, and I still am on B138. This is something that Huawei needs to look into post haste. I have written to them 5 times, till today. No response whatsoever.
2) Notifications - this is the elephant in the room. They are random at best.
All the Settings - Unlimited data Access, Battery Optimizations, Battery Ignore Whitelists, Priority Notifications, etc. are all on, as is oft discussed, and checked, but whatsapp and emails sometimes still do not give me a notification, until I open the app. This IS an issue for me. I am missing time constrained messages all the time. If anyone has a fix or solution for this, I will be very grateful.
3) Keyboard, Sometimes, the keyboard will freeze if the screen sleeps whilst the keyboard is open in an app, and I reopen it.
I have to collapse the keyboard and bring it up again. Not a huge deal, but an annoyance, none the less. Maybe a GBoard thing?
4) Screen Auto Brightness - Takes an age to organize itself. In the dark, it will blind you, before thinking to itself, that it is, indeed, night, and the screen should be a wee bit less bright. The exact opposite in the day - Very dim and then will eventually get off its backside and decide to brighten up the screen. Very annoying.
5) How do I change the name of my phone. It's not the Bluetooth and Wifi name. My car still picks it up as Huawei LON-L29, as do apps like Photosync and whilst connecting to my Mac.
6) Photos. Now this may not be a PD Specific issue, but when I transferred my 22,000 images across, they all came as a big jumbled mess. No date-wise organization. So looking for specific images, is well, impossible.
7) Music - No equalizer settings in the stock music app. For my specific purposes, unusable, because in my car's bluetooth radio, the bass is overwhelming.
So, apart from these minor points (and 1 big one), I love the phone. I wonder how they could possibly improve it...Firmware, Huawei! Firmware!
For photos delete the cache. That'll sort the jumbled up mess.
For Music Player Google removed the EQ option a few months ago, I hate Play Music now. I use Captune. It has its shortcomings but its the best EQ.
Keyboard - I use Swift with no problems.
My worst issues are the crappy screen protector (GG3) and the lack up updates. I'll be selling it shortly.
I'm enjoying my phone,the only gripe I have with it is the UPDATES.
As for keyboards Try downloading Blackberry Keyboard or Google Keyboard.
Thank you for your suggestions, guys.
I tried clearing the cache, but no joy there. I tried an app called Quickpic, that is apparently supposed to deal with this. Didn't help either.
I was wondering, even if I had to reimport all my image and video files, is there any way they could be sorted by date taken?
This is turning out to be as big of an issue as the notification one, as I depend on images and videos, to send and discuss with my clients. And needless to say, I can't find anything. So am relegated to carrying an iPhone 6s+ just for my media, so I can send the required files via email or WhatsApp. Really, Not an ideal situation.
I will try the BB Keyboard.
Regarding the packaged screen protector, agreed, it is appalling. Before I buy the 2.5/3D tempered glass screen protector, has anyone had any experience with it?
Bonerp, Captune works for me, Thank you.
Have any of you'll worked around the notification bug?
For example, WhatsApp notifications sometimes do not wake the screen, but when a second or third WhatsApp message comes through, it may wake...Or not.
Seriously, if this is such a widely publicized bug, why is Huawei not looking into this?
ap10046 said:
Thank you for your suggestions, guys.
I tried clearing the cache, but no joy there. I tried an app called Quickpic, that is apparently supposed to deal with this. Didn't help either.
I was wondering, even if I had to reimport all my image and video files, is there any way they could be sorted by date taken?
This is turning out to be as big of an issue as the notification one, as I depend on images and videos, to send and discuss with my clients. And needless to say, I can't find anything. So am relegated to carrying an iPhone 6s+ just for my media, so I can send the required files via email or WhatsApp. Really, Not an ideal situation.
I will try the BB Keyboard.
Regarding the packaged screen protector, agreed, it is appalling. Before I buy the 2.5/3D tempered glass screen protector, has anyone had any experience with it?
Bonerp, Captune works for me, Thank you.
Have any of you'll worked around the notification bug?
For example, WhatsApp notifications sometimes do not wake the screen, but when a second or third WhatsApp message comes through, it may wake...Or not.
Seriously, if this is such a widely publicized bug, why is Huawei not looking into this?
Click to expand...
Click to collapse
I tried a curved tempered glass protector and it was awful so binned it. It had tape on the edges and just didn't look good and lost sensitivity.
Have you tried clearing cache at the boot screen or from settings/storage? Might help with the notification bug.
I've sent Huawei several things to fix and just had a 'thank you' response and nothing more. I'm not aware of a notification bug though. I definitely had one on the mate 9 until the first pre release fix was received, but not on this one.
Only other thing I can suggest re pics is delete data, or delete google account, delete cache then add your account again.
How do you guys work around the copy-paste thing?
I mean to having to bring out a paper and pen for copying an email address, phone number, passage from a message or an email is just unacceptable, when this is a widely utilized convenience on other platforms and, I believe, some Android UI's too?
I have tried a few apps that claim they can do this, but no joy.
Also, sharing contacts from the contacts app, only allows vcard, text message and attach to email, no What'sApp, Outlook or any app, for that matter. Can this option be changed somewhere?
quick question
I am looking to get the mate 9 pro; which is the same phone as the PD, just without the fancy branding..
Are any of you on Tmobile in the USA, and, do you get 4G/LTE?
The reseller I have been emailing with on Amazon says you do NOT get 4GLTE on Tmobile in the USA with this phone, but I have read that you do.
Thanks if you can help with this! :good::good:
Hi,
I find the Smart Lock (using Trusted Places) to be very buggy..
Sometimes I find that the Smart Lock just stops working when I'm at my desk.. Whatever, so I try and re-enable it, but I'm never able to easily re-enable it. I follow the same process, but the lock screen doesn't have the unlocked padlock. Rebooting the device made it work, and I also got it to "work" by toggling "On-body detection", and then going back to "Trusted places" (or some odd combination of adding a 2nd Trusted Place). It's a bit frustrating..
It's also not clear to me how to enable the "Trusted places" option. For example, the "On-body detection" option has a toggle to enable it. The "Trusted places" screen has no button/toggle. I tap on the big tile/graphic of the "house with the 4 dots linking to the phone", and I believe that's how you kickstart it?
Lastly, in the Trusted Places screen, it has a note at the bottom saying:
"Your device will stay unlocked for up to four hours..."
Click to expand...
Click to collapse
So according to that, it expires at 4 hours? However when I wake up I notice that it's still active..
I have a similar issue were at random the smart lock will just not work and I have to log back into the phone, even finger print option not available. Basically same as if I was to restart the phone. The feature is still enabled so don't need to re enable! I was hoping that getting onto a pixel this garbage will stop happening after experiencing it on my old op6t but as of now the pixel works worse then op.
thisguy159 said:
I have a similar issue were at random the smart lock will just not work and I have to log back into the phone, even finger print option not available. Basically same as if I was to restart the phone. The feature is still enabled so don't need to re enable! I was hoping that getting onto a pixel this garbage will stop happening after experiencing it on my old op6t but as of now the pixel works worse then op.
Click to expand...
Click to collapse
Ah interesting, so you are experiencing similar issues too..
I wonder if it has something to do with the phone temporarily losing it's current location, and thus forcing a lock on the phone? Not sure..
oksureman said:
Ah interesting, so you are experiencing similar issues too..
I wonder if it has something to do with the phone temporarily losing it's current location, and thus forcing a lock on the phone? Not sure..
Click to expand...
Click to collapse
You would think but I have my watch connected to it as well both wearos or fitbit sense and same issue with smart lock, so not just location limited.
Noticed the same problem here. My old device I just used the rear finger print scanner, it was instant on and in, with the Pixel 6 Pro the finger print reader is neither in the best place or the quickest, and if you are in a dark place and don't aim properly, its a blinding light! So I thought at least at home I can use smark unlock. Worked fine yesterday, today it wouldn't stay unlocked. All settings appeared okay, my address was shown as a trusted place, I loaded maps so it get my location (it was already showing me at home anyway), but just not working.
I then removed my trusted place, readded, exactly the same address from the pinpoint on the map was shown, and it is working again.
I took the 4 hours to mean that after 4 hours you would need to sign in again once, then you get another 4 hours of smart unlock.
Just a buggy piece of Google software I guess.
Honestly I don't think I've ever had Smart Lock that really worked on ANY of my android phone. It works when it wants to.
Smart Lock has been janky since original pixel and the nexii before that.