Dear Concerned,
I bought a phone from a friend, with a custom rom on it, Later on i installed a RUU from AT&T, but when later i reinstalled a custom rom on it, it started giving me an error whenever i tried to call. It doesnt recieve any calls as well. There is no sound. Internet is working though, SMS are OK. but no calls and no sound. Google apps crash every now and then. The worst thing is that i can go back to an RUU. neither through Flashing a ZIP nor through EXE as it gives error. all custom roms are giving same issue
Somebody plzzzzzzzzzzzzzzzzzzzzzzz help me
SOS ... DOT DOT DASH DASH and lots of TEARS
Sorry but you got to be more specific about the errors.
Which firmware are you running, which ROM (and version of the custom ROM) are you using, and - as @Roobwz already said - a few more details on the errors would be helpful.
Send by the swarm intelligence of my coffee machine ?.
Related
I'm really sorry if this has been answered before in any of the threads but I'm having a very peculiar problem. After a day or two of flashing any ROM(Energy ROM, Gen Y,etc, etc.) the network bars shows no service. Whereas at the same time if I call on my number it rings but I can not answer the phone neither can I see who's calling and I can't access the Call History as well.
I use Radio 1.00.25.05.
I know some of you'll might ask me to post in the ROM-related thread but this is happening since a month now I suppose with every ROM I've tried.
By the way I'm currently on Energy ROM, the latest build.
P.S : The only third party software installed was SpbBackup and S2U2.
Can someone please help me out.!
Try loading your stock rom once
Don't forget to hard reset the device after every Rom Flash.
Well I do hard reset after every flash and also everytime the problem starts I hard reset and it goes away. @nagasai : I will load the stock ROM and try it once. Any more advice anyone can pass on.?
You already have Hardspl, but try a different one (1.40 Olinex works fine for me)
Flash a COMPLETE stock rom (including Radio), see if the problem persists, check if you've also changed the radio (from the one you have now).
Purists would tell you to do one of these things at a time... to find out what was causing it.
I say that if you want to solve it... just do it all at the same time (well... by the correct order ofc... ).
Hope it works...
good Luck
Hello. I have a problem with sound in my kaiser with Android. I tried 2 systems [Cynanogen mod 6 (Froyo) and Myn's Warm Donut], 4 radios (from 1.71 to 1.65) and 2 kernels. Sound never appeared. Why?
what zimage or nbh you using if you are using a older one it might have problems
Did you mean kernel? the newest from this page:
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
it may be that you have muted the media volume in settings.
No. I don't have any sound. Not only media. When someone calls to me, I cannot hear him too and this person cant hear me too.
Audio issue
I have the same problem. I tried different builds and nothing helps. Any suggestions??
Just a thought, but have you tried flashing a stock rom, then flashing to nand again? Flashing a stock rom clears the entire nand, leaving no possibility of stray bits of data left from custom roms.
I have to say, I get the same thing, but with a slight variation. Sound works for me up until i make at least one call (but could happen before that). Once I make that call, either during the call, or after, the sound is gone. I too had myn's donut, and then frayo, and both times, the exact same problem. I will try to flash the stock rom, and then back to android, but it is a problem that I also share.
This is my first post on xda, so please be nice!
<refresh>.
Mu_aawiyah said:
I have to say, I get the same thing, but with a slight variation. Sound works for me up until i make at least one call (but could happen before that). Once I make that call, either during the call, or after, the sound is gone. I too had myn's donut, and then frayo, and both times, the exact same problem. I will try to flash the stock rom, and then back to android, but it is a problem that I also share.
This is my first post on xda, so please be nice!
Click to expand...
Click to collapse
Yeah, flashed it back to a the most recent stock rom, and then back to andriod.. how works perfectly. Sorry i didnt tell you guys earlier.
I think it was to do with the radio thingy-ma-jig. I flashed it with winmo 6.1 from htc website, and then back again.
Now i'm runnying frayo.
I flashed the newest stock rom from htc site too, then 1.65 radio, but it didn't help :/
Wagierek said:
I flashed the newest stock rom from htc site too, then 1.65 radio, but it didn't help :/
Click to expand...
Click to collapse
That is most likely because you didnt flash it right. take the .nhb from it, plug it into your sd card and flash it from sd. try that.
I'm not stupid. I always flash anything like that-not via CustomRUU-because I have damaged my USB socket and now my Kaiser cannot be recognized by computer.
PS: Today when I booted my Kaiser, next to ANDROID word, I saw "handset status changed to 1". When I rebooted, it didn't show. What's this?
Wagierek said:
I'm not stupid. I always flash anything like that-not via CustomRUU-because I have damaged my USB socket and now my Kaiser cannot be recognized by computer.
PS: Today when I booted my Kaiser, next to ANDROID word, I saw "handset status changed to 1". When I rebooted, it didn't show. What's this?
Click to expand...
Click to collapse
Well, with regards to how I got it fixed (the detailed explanation), i flashed it with a custom winmob rom initially, but surprisingly, the same problem i had with android was happening with the winmob. I could make a call after reboot, but after that call, the sound completely died, and the camera did not work. So i tried to flash with the latest stock rom. I've uploaded the actual roms i used on my public drop box folder here => "i tried posting the link, but because i'm new, it wouldnt allow me...pm me"
I am not a professional on flashing, rather i am a beginner. My tytn 2 is a european T-mobile version. I tried to flash it, it did it half way...then stopped! I tried to do it again, but then it just said "...loading..." and would not go past it. But when i booted to my custom rom, it was still there, but the problems had gone. I guessed that it flashed the radio, and nothing else.
When i then went to android, it worked perfectly.
That was my journey.
I hope that helped... maybe.
Unfortunately, it didn't help.
Any other ideas?
I solved mine by changing radio ROM,but i lost sound and camera in windows,any ROM that fit both android and windows???
What version did you flash?
1.65.14.06
Me too!
I flahsed froyo last night and didn't test after makng calls. I'm having the same issue (lose sound after a phone call). I followed the sticky guide and sim unlocked the radio before flashing (which I think I had already done before). I will try changing radios when I get home to see if this resolves the issue and post my results.
Update: I flashed 1.71.09.01 on my ATT Tilt and this fixed the issue. Now sound and camera work great. Phone runs faster also!
OK sooo, while making some last-minute checks before posting this thread, I finally found the solution to my problem. It was actually quite obvious if you think about it for a second, but I'll post this anyway just in case someone runs into this problem, as I spent hours figuring this one out.
Just as a reminder of my shame and stupidity, I'll just say that even with years of experience on most PC OS, and as many years troubleshouting on any of those, it didn't occur to me that I should just google the exact error message. Instead, I spent countless hours scouring forums, guides, wikis and whatnot to no avail. Also did countless google searches, just not with the exact error message. So if you're stuck anywhere on any operating system, and have an error message, just remember : GOOGLE THE DAMN ERROR MESSAGE !
So, first and foremost, the solution : go into sms app>settings and search for service center number. Then google your provider's service center number. If they're different, that's probably your problem right here. Write down the one you have just in case, and put in the one you found. Problem solved !
What happened is that while trying to resolve the APN problem and before using the info from another rom, I found some bad informations regarding my operator. I used it, including something that I thought was unrelated to sms. Well it was, and it broke the functionality.
But wait, I still have a question !
Now I'm back on stock 1.82.405.1 with S-OFF and plan to root again tonight or tomorrow following instructions in that thread : http://forum.xda-developers.com/showthread.php?t=1107911.
I plan on backing up everything (including APNs) and do it all over again. Anything I should worry about (like, not doing some specific part because I already have S-OFF) or will it be just fine ?
Here is my unfinished original message, just in case someone searches for a similar problem :
Hi,
So, I always wanted to root my Desire Z to have more control/apps/etc, and finally decided to do it yesterday. Now I have a problem, SMS won't work any more. I tested with the rooted 1.34, CM7.0.3, go sms pro, the stock app, handcent, and any combination of those. Not working.
Everything else went perfectly fine, except the sms. I had issues regarding APNs (no internet, mms), but found the info and all was working nice in cm7. Except sms.
I also tried to go unroot and go back to stock rom, no luck.
Now, I'm not sure at which point this happened between being stock and being on CM7. Here are the steps I followed :
Base situation was : stock rom 1.82.xxx (last OTA update), INFOCID was htc_102
The phone itself is a Desire Z with german keyboard (QWERTZ physical keybord)
So, I Rooted using this guide : http://forum.xda-developers.com/showthread.php?t=1107911.
Everything worked nice, nothing to report. Didn't test sms at that point though.
Backed up with ROM manager.
Then, I installed CM7.0.3 and google apps using their wiki (http://wiki.cyanogenmod.com/wiki/HTC_Vision:_Radio_and_CyanogenMod). Backed up with rom manager.
At that point, internet and mms didn't work because of a lack of APNs, so I found suitable info (restored my 1.34 save, exported apns, re-restored CM7, import apns) and everything was working like a charm.
I noticed that the phone seemed to lose data connexion quite often, but not sure if I was just unlucky or if there was a problem.
Still, everything worked nicely, except sms.
Now, that's a problem obviously, so after reading countless threads vaguely related to my problem, the consensus seemed to be "flash again". Well I did it, it didn't help.
So I thought screw that, I'll return to stock. Which is what I did. I used this guide : http://forum.xda-developers.com/showthread.php?t=835971 .
I used the 1.34 rooted rom, and the factory 1.72 from the RUU found here : http://forum.xda-developers.com/showthread.php?t=971109&highlight=vanilla+rom
I took extra care of the versions number, and didn't have to change the misc.img as in the guide, everything went smooth. Well, except it didn't turn S-ON back when I flashed the factory, so i'm still S-OFF.
I updated up to 1.82.405.1
I figured I could restore S-ON using this : http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#radio_S-ON_and_original_CID
But that doesn't seem to address my sms problem.
So, I am back on stock but with S-OFF, got a part7 and part17 backups (no idea what part17 is for, but it looks like it was created before rooting attempt).
Ideally, I'd like to re-root and go to whatever nice rom is out there, but what I want right now is sms working. Sending gives me a message after a while saying "Couldn't send text message after multiple tries". Can't send to myself or other people. Not sure if I can recieve (but I think I can't). MMS/internet works fine which is why I think it's not APN-related.
Click to expand...
Click to collapse
I've just rooted and installed Viper ROM on my ATT HTC m9 and everything works great except I can't receive phone calls. The phone never even rings. I've also flashed ICE and ARHD with no success receiving phone calls. If I restore to a TWRP backup of stock the phone works perfectly so it's obviously something to do with the ROM.
I've checked the other posts on here and none of the fixes have worked, yet. I wanted to try to RUU but whenever I run the RUU application (windows 8.1) the progress bar to initialize the setup completes and the program closes. It never does a flash. I've tried running as admin, disabling services, and running in Win7 compatibility mode to no success.
Do any of you have any ideas on either of these?
mdomino said:
I've just rooted and installed Viper ROM on my ATT HTC m9 and everything works great except I can't receive phone calls. The phone never even rings. I've also flashed ICE and ARHD with no success receiving phone calls. If I restore to a TWRP backup of stock the phone works perfectly so it's obviously something to do with the ROM.
I've checked the other posts on here and none of the fixes have worked, yet. I wanted to try to RUU but whenever I run the RUU application (windows 8.1) the progress bar to initialize the setup completes and the program closes. It never does a flash. I've tried running as admin, disabling services, and running in Win7 compatibility mode to no success.
Do any of you have any ideas on either of these?
Click to expand...
Click to collapse
I had this happen too and it's still kind of a mystery as to what causes it. Did you see this thread? My posts in there are everything I did to fix this, but I can't say exactly what step fixed it. http://forum.xda-developers.com/one-m9/help/unable-to-receive-phone-calls-t3137209
I haven't had the issue in about three weeks now, so whatever it was is apparently fixed. I'm on ICE 3.0.1 with no issue. A definite short-term fix is to do steps 2 or 3 of post #3 in the above link. I suspect it has something to do with either the radio not reading the default.xml file properly or the default.xml file not containing the correct voLte settings.
jollywhitefoot said:
I had this happen too and it's still kind of a mystery as to what causes it. Did you see this thread? My posts in there are everything I did to fix this, but I can't say exactly what step fixed it. http://forum.xda-developers.com/one-m9/help/unable-to-receive-phone-calls-t3137209
I haven't had the issue in about three weeks now, so whatever it was is apparently fixed. I'm on ICE 3.0.1 with no issue. A definite short-term fix is to do steps 2 or 3 of post #3 in the above link. I suspect it has something to do with either the radio not reading the default.xml file properly or the default.xml file not containing the correct voLte settings.
Click to expand...
Click to collapse
Thanks! I followed your steps and got it working. It seems from what you and Venom support said that the problem is with going directly from the ATT RUU (5.0.2) to a custom 5.1 ROM. Once I flashed the developer edition RUU and edited the default.xml I was able to flash ViperROM and have calls working without any further tinkering.
Thanks a ton!
mdomino said:
Thanks! I followed your steps and got it working. It seems from what you and Venom support said that the problem is with going directly from the ATT RUU (5.0.2) to a custom 5.1 ROM. Once I flashed the developer edition RUU and edited the default.xml I was able to flash ViperROM and have calls working without any further tinkering.
Thanks a ton!
Click to expand...
Click to collapse
Thanks for the feedback. That's weird though because I couldn't even receive calls on the developer edition.
I couldn't make calls until editing the default.XML in developer edition. I'm still not sure how it works but I'm happy either way!
Sent from my HTC One M9 using XDA Free mobile app
Hello @ all !
Since the update to Android 6.0 there are no more sounds.
Everything in connection with sound don't work. When i change volume level, there is no "beep" ton.
Also i can't call or can be called. When i try to call it freeze, only power menu to restart works. When somebody trys to call me, it's like my phone is off, but it's on.
I am registerd to the network, so i can send and reach sms / use the internet.
I tried the ROM from Leedroid , ViperRom , RevolutionHD and MaximusHD. ( FULL WIPE etc. i tried every option.... )
When use the CandySix Rom, i have sound and i can call...
Would be great if anybody could help me.
THX A LOT!
I think I may have the same issue. I purchased a used M9 of AT&T variant. I know it had sound as the first time I booted it I heard the ATT boot sound. I never used the phone though and I immediately entered fastboot and changed it to a developer edition (the phone was already s-off and unlocked) I then installed LeeDroid via TWRP. The rom works fine but I have no sound at all from internal speakers or headphones. I also tried ViperOneM9 with the same result. I have not yet tried CandySix, but I will.
The only thing that is different fro me is that I don't have a sim yet for my carrier so the phone isn't yet registered. It is on wifi though. No sounds work at all. Touch sounds, volume rocker sounds, notifications, music also doesn't play from mp3's I have on my sd card (they actually don't seem to even start as the time counter doesn't ever start even after hitting pause and play)
Any Ideas at all?
-J
Take a look over in the LeeDroid thread. You need to flash the latest firmware before installing the HTC MM based ROMs.
it's awlays common sense to read the OP. especially when there is a major upgrade like from lollipop to marshmallow where the whole firmware is changed/modified . be always sure to run latest firmware when trying to use latest roms. aosp/cm are a different story, for them it doesn't matter if lollipop firmware or MM is used