Related
I have an International version of ascend p6 -06 with B107.
I was trying to install kitkat into it.Its rooted.
I downloaded the UPDATE.APP from one of the forums.I installed twrp and I thought I can use to flash the new ROM using it,but I couldnt find the option,I read somewhere only the zip files can be installed through TWRP. Whenever I press the volume+ + volume- + power button,the phone starts with the TWRP directly than doing any update .I have put the UPDATE.APP file in dload folder in my SD card,still it was not updating with that given shortcut.
I did a stupid thing just now,I wiped all datas using TWRP and now i have no OS installed ,and like that my phone is bricked.now if i switch on the phone it gets stuck at huawei ascend Logo.and if i press volume up and down buttons along with power button,then it goes to TWRP ..
pls pls pls help me ,and thanks a ton in advance.
I even tried downloading the the original rom from the huawei website and still not able to update using that UPDATE.APP file...
don't panic..
you habe to set your phone into bootloader mode..push power and Volumen + (or -) together and hold them for about 5sec until you See the huawei ascend Logo (it stucks there - thats OK)..
then Connecticut your p6 to the pc and Start your ADB..
depending what Firmware you want (JB or KK) you habe to get a stock recovery IMG..
this can be flashed by ADB using the known commands for flashing recovery..
when you have the stock recovery you can put an update.app (e.g. from the last b511) onto your SD card Ingo the dload folder..
then you habe to unplug your phone from pc and press all three buttons (power and Volumen +/- together) and hold them until you See the Android Figure (force update method)..
should work..
if not then you have to search for the twrp sideload feature (via Google)..
can u help me with starting adb.
blueIBI said:
don't panic..
you habe to set your phone into bootloader mode..push power and Volumen + (or -) together and hold them for about 5sec until you See the huawei ascend Logo (it stucks there - thats OK)..
then Connecticut your p6 to the pc and Start your ADB..
depending what Firmware you want (JB or KK) you habe to get a stock recovery IMG..
this can be flashed by ADB using the known commands for flashing recovery..
when you have the stock recovery you can put an update.app (e.g. from the last b511) onto your SD card Ingo the dload folder..
then you habe to unplug your phone from pc and press all three buttons (power and Volumen +/- together) and hold them until you See the Android Figure (force update method)..
should work..
if not then you have to search for the twrp sideload feature (via Google)..
Click to expand...
Click to collapse
I am sorry to trouble..I am not a PRO in all these like u guys.
how do i start a ADB?? and where to download the stock recovery image?
i am a noob too but made the same experience linke you now..
OK..so first things first..
you have twrp as recovery in your p6..so you have flashed this by "adb fastboot"?
nope
blueIBI said:
i am a noob too but made the same experience linke you now..
OK..so first things first..
you have twrp as recovery in your p6..so you have flashed this by "adb fastboot"?
Click to expand...
Click to collapse
no. I used a huawei P6 toolkit.
OK...then there should be the Option to install/flash a stock recovery..
here comes the next problem
I downloaded the abd driver installer 1.0,it identifies my phone.but once i press the button for installing the error pops up.,incompatible with win 8 (64 bit.)now what to do??
yes but
blueIBI said:
OK...then there should be the Option to install/flash a stock recovery..
Click to expand...
Click to collapse
The option of installing stock recovery is there,but now when i can connecting the phone its not recognising.it shows phone not connected.
hm..
then you should search in Google for the twrp adb sideload features to get a connection between phone and pc
ok let me
blueIBI said:
hm..
then you should search in Google for the twrp adb sideload features to get a connection between phone and pc
Click to expand...
Click to collapse
I will try to find it and will update you
Thank youuuuuuuuuuu
blueIBI said:
hm..
then you should search in Google for the twrp adb sideload features to get a connection between phone and pc
Click to expand...
Click to collapse
I have no words to thank you..finally its done..the adb drivers were not installed well,thats why it was not picked up by the tool.I updated the stock recovery image and it rebooted and installed well...thanks a ton again..and I appreciate your fast replies.I had spend 2 days only in this.its such a releif.:victory::victory:
you are welcome
Again problem
blueIBI said:
you are welcome
Click to expand...
Click to collapse
I am sorry to trouble you again.yesterday i updater to B508 kitkat,but gprs or 3g were not working.so today I downloaded the B512 version.in this version if iam putting the dload file in SD card,it doesnt read it.I have to put this in internal storage itself.This time my phone is stuck in the normal android recovery stage as I dont have TWRP installed (I guess,the same shorcut is not starting TWRP).
And to update to the older version the update.app file should be there in internal storage which i cannot assess at this point since mobile doesnt start..what do I do??
I tried installing TWRP connecting mobile in the present status,but its not installing
hve you tried to do a force update (3 button method)..
it should work when you put the update.app in dload folder in your sdcard..
maybe you have to go to another Version (b122 or b132)..
but the only method that might now work is the 3 buttons (power and vol +/- together)..and you have to hold them until you see the Android figure (can take more then 10 seconds.. be patient)..
if this won't work then i'm too speechless (hadn't this case before)..
hope you geht your p6 running..
again got lucky
blueIBI said:
hve you tried to do a force update (3 button method)..
it should work when you put the update.app in dload folder in your sdcard..
maybe you have to go to another Version (b122 or b132)..
but the only method that might now work is the 3 buttons (power and vol +/- together)..and you have to hold them until you see the Android figure (can take more then 10 seconds.. be patient)..
if this won't work then i'm too speechless (hadn't this case before)..
hope you geht your p6 running..
Click to expand...
Click to collapse
It worked.I fomatted the sd card and left only dload folder .and used the same version which was originally working (508).now its reverted back to normal ..half my tensions are over.but the i wanna change from this rom,in this my internet doesnt work..I wanted to install B510,but for that I have to install B132 first,which i am trying.but its not working.Any idea what should be done.?
try to flash then recovery Form b132 (usw the huawei update extractor to create one..can be found here in then forum)..then via force update you should be able to installiert then b132..and from there it is easy to load then b512 for example (system update local or force update (there you don't need to change the recovery)..
blueIBI said:
try to flash then recovery Form b132 (usw the huawei update extractor to create one..can be found here in then forum)..then via force update you should be able to installiert then b132..and from there it is easy to load then b512 for example (system update local or force update (there you don't need to change the recovery)..
Click to expand...
Click to collapse
You meant I shoould make a recovery for B132 using huawei update extractor.I have the P6 tool with me,if i update a recovery image for jellybean (currently its kitkat) will that be enough??
yes will be enough..
bigger problem
blueIBI said:
yes will be enough..
Click to expand...
Click to collapse
I made B132.zip file and using TWRP i installed it.It showed the istallation was successful,and i rebooted to the system and its stuck in huawei ascend logo and its not moving from there.I tried again using the vol- + vol+ + powerbotton,Its restarting to the sa,me logo.somehow recovery is not working.I think now I am really screwed.
you should not make a ZIP file..
now you are at then beginning again..
hello all bro
i have p6-u06
only hung at huawei ascend
cant go recovery using volum down and power
please hellllllllllllllllllp
Have you tried to turn it off and on again? That was not a joke. Press the POWER Button for 10-15 sec and when the screen goes black use the VOL UP + VOL DOWN + POWER Button. Now you shuld get to the recovery. Please use Ascend P6 Q&A, Help & Troubleshooting the next time.
RabbidZ said:
Have you tried to turn it off and on again? That was not a joke. Press the POWER Button for 10-15 sec and when the screen goes black use the VOL UP + VOL DOWN + POWER Button. Now you shuld get to the recovery. Please use Ascend P6 Q&A, Help & Troubleshooting the next time.
Click to expand...
Click to collapse
hi bro
i did but not slove please help me
i download this
http://consumer.huawei.com/en/mobile-phones/support/downloads/p6-u06-en.htm#anchor
and i put dallod insid memory
and follw instraction but cant go to donloawd mod
please help me
im sosorry my langug is wake
RabbidZ said:
Have you tried to turn it off and on again? That was not a joke. Press the POWER Button for 10-15 sec and when the screen goes black use the VOL UP + VOL DOWN + POWER Button. Now you shuld get to the recovery. Please use Ascend P6 Q&A, Help & Troubleshooting the next time.
Click to expand...
Click to collapse
hi bro
iafter put software dallod insid memory card
i choos apply update from extrnal storge but not slove fail
nokia alkng said:
any one help me plaz
Click to expand...
Click to collapse
Your phone boot or not ?
"Yes" > You can update throught the settings > More info > Update > Local Update
The update.app need to be in \sdcard\dload folder if you don't have create it If the dl file is a .zip unzip it into you will see the update.app
and if you allow debuging mode (Spam the build number in settings > More info and you will be allow to access to the dev section (in settings) and tick debugging mode then connect to your pc (check the debugging mode in the notification bar)) you can now access to the recovery using adb
For Adb you can dl it here > http://forum.xda-developers.com/showthread.php?t=2636231 and follow the instruction to connect your phone then write this line in the command window
Code:
adb reboot recovery
your phone will boot into recovery
To update The update.app need to be in \sdcard\dload folder if you don't have create it If the dl file is a .zip unzip it into you will see the update.app
The version you have dl is old, latest JB is B132 and KK is B513 for the p6-u06 international (these rom are multilanguages)
Skyllery said:
Your phone boot or not ?
"Yes" > You can update throught the settings > More info > Update > Local Update
The update.app need to be in \sdcard\dload folder if you don't have
create it
and if you allow debuging mode you can access to the recovery using adb
Code:
adb reboot recovery
Click to expand...
Click to collapse
bro im so sorry to late but phone cant boot and no usb debug and stell hung logo android plz.please pleassss help me:crying:
bro
USB Debuggin not open plz help me pleaseeeeeee
hi all
i use this
"TWRP Installer by bokchoi2020"
"Credits to Surdu and TeamWin"
"Make sure your system is in Android right now, usb debugging turned on."
"Reboot to bootloader..."
error: device not found
"Installing TWRP...."
< waiting for device >
"Rebooting to system..."
< waiting for device >
Press any key to continue . . .
please help me
Hello,
I´m Trying to make this (http://forum.xda-developers.com/show....php?t=2630208) work on my Huawei,
but i´ve run into some problems.
I cant get my phone to go in fastboot and ADB keeps saying Waiting for devices or says Error device not found.
This image shows what im getting if i connect my phone to my PC and reboot it using VOL UP + VOL DOWN + POWER
(USB Update Enter. . .
HUAWEI SDCARD AND USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is LOCK state.)
im sure my phone is running the right Firmware ( B118) here is a screenshot please tell me if im doing anything wrong.
please help
nokia alkng said:
help me pleaseeeeeeeeeeeeeeeeeeee
Click to expand...
Click to collapse
Tried the search-function yet?
There are several howto's for it
nokia alkng said:
who help me i will donat himmmmm:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Hi guys,
I can get to recovery mode and the initial splash screen, but not into Android OS on my Huawei p6 U06.
I tried reflashing the rom via SD card with UPDATE.APP B111, but it still fails to boot and hangs on the splash screen.
Another weird thing is that my splash screen doesn't show the huawei logo but an android logo....
I tried to adb the phone but there are no suitable drivers for phones in recovery mode... only for USB developer mode...
Hopefully there is a fix to this.
Thanks guys.
nokia alkng said:
hi all
i use this
"TWRP Installer by bokchoi2020"
"Credits to Surdu and TeamWin"
"Make sure your system is in Android right now, usb debugging turned on."
"Reboot to bootloader..."
error: device not found
"Installing TWRP...."
< waiting for device >
"Rebooting to system..."
< waiting for device >
Press any key to continue . . .
please help me
Click to expand...
Click to collapse
The debugging mode is off so the device can't be found by adb.
If you can't use stock recovery and you can't flash any recovery because you can't access throught adb, your phone don't boot .. I don't know what to tell you .. your phone is dead ? .. how your phone is in this condition ?
Another weird thing is that my splash screen doesn't show the huawei logo but an android logo....
Click to expand...
Click to collapse
Fake Ascend P6 or not the good version so the update brick the phone ?
hi bro
good day
thanx to reply
my phone not dead stell lif in hospatel but now is hung at android logo and can go to recovery to wip cach and wip data its all those done but stell problem not slove stell hung android logo please help me
nokia alkng said:
hi bro
good day
thanx to reply
my phone not dead stell lif in hospatel but now is hung at android logo and can go to recovery to wip cach and wip data its all those done but stell problem not slove stell hung android logo please help me
Click to expand...
Click to collapse
Which Recovery ? Stock or TWRP ?
You can't flash/update ?
I tried reflashing the rom via SD card with UPDATE.APP B111, but it still fails to boot and hangs on the splash screen.
Click to expand...
Click to collapse
Stock :
Try with B125 or B132 because B111 is too old maybe it's the cause of the problem.
sdcard\dload\Update.app and reboot into recovery "Power (hold) + Volume up (hold) +Volume Down (hold) then when you see the ascend logo just Volume + & - (hold)
ok bro
thanx i was busy to day
so i will try tomorow
thanx aloot again
Skyllery said:
Which Recovery ? Stock or TWRP ?
You can't flash/update ?
Stock :
Try with B125 or B132 because B111 is too old maybe it's the cause of the problem.
sdcard\dload\Update.app and reboot into recovery "Power (hold) + Volume up (hold) +Volume Down (hold) then when you see the ascend logo just Volume + & - (hold)
Click to expand...
Click to collapse
hi bro
i dwoload p6-b132 and put dallod insid sdcard and the problem when just press volume +&- go to recovery only and gave me 5 choosin
1- reboot system now
2-apply update from extrnal stoarge
3- wipe data/factory
4- wipe cache partition
5-apply update from cach
when i choos apply update from extrnal stoarge and select dload no theing apper all empty folder like 00/
and is F A I L
please help :crying:
nokia alkng said:
hi bro
i dwoload p6-b132 and put dallod insid sdcard and the problem when just press volume +&- go to recovery only and gave me 5 choosin
1- reboot system now
2-apply update from extrnal stoarge
3- wipe data/factory
4- wipe cache partition
5-apply update from cach
when i choos apply update from extrnal stoarge and select dload no theing apper all empty folder like 00/
and is F A I L
please help :crying:
Click to expand...
Click to collapse
Have you put Update.app in /sdcard/dload ?
You can try with a formatted sdcard sometimes it's the problem
hi bro
i format sd card 2 gb fat32
and put dlaod insid memory card and go recovery and i changed other sdcard sandisk 4gb but not slove my problem please help me
Skyllery said:
Have you put Update.app in /sdcard/dload ?
You can try with a formatted sdcard sometimes it's the problem
Click to expand...
Click to collapse
bro bro bro:crying::crying::crying:
i did i format and chang 3 memory card and same problem
pleaeeeeee help :crying::crying:
hello android one users
this is my first post so please hit thanks .
please read full thread then do anything .
I am going to tell you how to get your mobile at the stage where you gain your warranty back ,
and your phone will appear brand new as u bought it .
1. flash stock rom with sp tool . (must have boot loader unlocked) hear http://thebroodle.com/micromax/a1/stock-rom-micromax-canvas-a1-android-one-official-stock-rom/
2. after successfully flash start your phone and enable usb debugging
(settings ->about phone->tap 4-7 times Build number now go back to Developer options ->usb debugging )
also enable unknown source
(settings ->security -> unknown source )
3. u must have installed your phones usb driver and phone must have some charge to survive at least 15 min . hear http://www.theandroidsoul.com/downl...501-drivers-usb-adb-windows-8-1-8-7-vista-xp/
4. download the tool named ALL-IN-ONE-TOOL hear http://forum.xda-developers.com/cro...l/tool-master-tool-unlock-bootloader-t2997696
5.download fix all a1 hear https://drive.google.com/file/d/0Bw6KjdLHY2s0MkFrZUdNVVpLM28/view?usp=sharing
and create imei by this http://forum.xda-developers.com/showthread.php?t=2399037
copy the created imei file named "MP0B_001" to
fix all for a1.zip\data\nvram\md\NVRAM\NVD_IMEI copy and replace ( just drag and drop )
then place this zip to your phone sd card .
6. extract it and open all in tool .exe . it take a while .
follow instructions
when the main menu comes type 4 to select custom recovery
it will ask is your bootloader unlocked ?
type 2 "no" .
then it ask choose recovery
type 1 "cwm recovery " .
now connect your phone and see your device must show usb debugging . tick if your phone say something like pc or lapi mac address.
7. now your phone boot into recovery
use up down button and power button to select
go to install zip (second option )
install zip from sd select the zip from sd
press power button and flash zip
______________________
reboot
done
now you have your warranty
working imei
and nvrm in wifi fix .
and your phone is unrooted .
you can install lollipop ota . (when it comes)
A. if your phone working fine after flashing stock rom then leave rest of the steps .
B. if you facing only nvrm error in wifi then then download this zip hear https://drive.google.com/file/d/0Bw6KjdLHY2s0c0trcC1KNTVJQzA/view?usp=sharing
and flash it into recovery
c. if imei + nvrm not working do all steps .
y. please hit Thanks and tell me if any error in this .
z. thanks xda and all known unknown sorces and dev.
thanks
http://forum.xda-developers.com/showthread.php?t=2399037 for imei
http://forum.xda-developers.com/cro...l/tool-master-tool-unlock-bootloader-t2997696 all in one tool
http://thebroodle.com/micromax/a1/stock-rom-micromax-canvas-a1-android-one-official-stock-rom/ stock rom
http://www.theandroidsoul.com/downl...501-drivers-usb-adb-windows-8-1-8-7-vista-xp/ driver
https://drive.google.com/file/d/0Bw6KjdLHY2s0MkFrZUdNVVpLM28/view?usp=sharing fix all
https://drive.google.com/file/d/0Bw6KjdLHY2s0c0trcC1KNTVJQzA/view?usp=sharing nvrm fix
i am not responsible for any kind of error or break . do at your own risk . (its safe {i think })
wifi stuck on "turning wifi on" :'(
i unlocked the bootloader and flashed 5.1 initially (it got some wifi connection problems) so flashed cm12 which makes my wifi to stuck at "Turning wifi on"
now to make things straight i went back to my stock version 4.4.4 which still doesn't fix my problem
some one please help me......................
I did it in this way.
Use sp flash tools and flash stock rom. select firmware upgrade. done.
I install B708 Kangvip V3 ROM and then i flash kernel (ANGEL KERNEL V9) and when i reboot phone stuck on Huawei ascend logo(i thinh this kernel is not compatible with B708 Rom).
Soo i connect phone with USB on computer and try with adb & fastboot. The problem is that phone can´t connect with computer and i can´t install boot.img.
Then i try to put official firmware UPDATE.APP on sd card in dload folder and run with 3 key combination but in recovery mode says that SD card failed to load and i can´t do anything.
Can please help me ??
dedke said:
I install B708 Kangvip V3 ROM and then i flash kernel (ANGEL KERNEL V9) and when i reboot phone stuck on Huawei ascend logo(i thinh this kernel is not compatible with B708 Rom).
Soo i connect phone with USB on computer and try with adb & fastboot. The problem is that phone can´t connect with computer and i can´t install boot.img.
Then i try to put official firmware UPDATE.APP on sd card in dload folder and run with 3 key combination but in recovery mode says that SD card failed to load and i can´t do anything.
Can please help me ??
Click to expand...
Click to collapse
I have solved the problem ! I just flash the previous ROM i have on the phone via TWRP and now works !!!
First of all SORRY for my english , and hope you people undestand somthing .
Hello all , i just brick my device using advanced power menu .
Things was like this :
Room : borets ...custom-stok 184 room with flare x kenel ;
1 fooling arrownd with xposed modules , kenel auditor , frezeng some stock aps .. nothig happends.. even efter reboot 3 -4 time
2 Instalind APM module .. activate advanced power menu , activate passoword on power menu ... = Fu cke d up...
Frome now phone screen is turned off, like forever , and reboot randomly , sometimes appees only boot screen logo , somtimes boot for a while ,
BUT never boot when i press the power button .
3 I disassembly the phone , til i reach the battery cable .. I disconect the battery ... and i try to discharge the capacitors by touching the motherboard with a plate of copper . But still nothing , after putting the batery back phone vibrate for a second and nothing ...
4 > (BACK ALIVE !! ) I just turn on asus flash tool , connect the phone , charging apper ( battery is full ) then the screen goes black , led blinker also is turn off.. and after that i disconnect and conect again until the phone is start booting .. and finaly is turning on .. the software is working ...almost normaly ... and sometimes appers only the lockscreen for one second and after is ded again sometime room work only a minute ..and sometimes is fully working .. Somehow i delete the APM module , soft reboot worcks , reboot to bootloader (from rom tool box ) works , but i can't flash raw firmware , it's say update falied .. and reboot to recovery dosen't worck at all , or is appering only for one second.
5 After , pug and unpug the battery and go on after 10 minutes of trying ... i have a semi functional phone , terminal emulator worcks , root is present ...but if i let the phone to go into sleep .. sometimes is never turn on again..or is just die.
So i can flash in the room ifwi ,dnx and droidboot , or replace some files with root explorer ...to worck again ... or What to do ?
I can't follow unbrick tutorial because the 191 drivers dosent work in my windows 10 ....
Flash xposed disabler or something like this than wipe cash and dalvik and reboot. If it shows android is upgrading wait and all must be cool.
I can't go in recovery ..
New status , i aplied files from unbrick tutorial , but i don't know if i doit right , the process is completed is rebooting to OS, is rebooting in os, but the xftsk still shows wating for divice til device was not found . bootloader worck's , somehow , i can navigate in it with volume buttons but i cant press anything with power button ,
i flash a raw firmware with asus flash tool , but stil reboots somtimes , and power button dosent work in room wehen i pres power button , the device is briking again and dosent boot or reboot randomly .
Adb works , but by tiping adb reboot recovey , is not booting in recovery ...
I thing i mesed up some things in power menu files , (a few times by simply navigate in root folder i saw some folder and file about power menu ) .
now i have flashed borets24 sistem raw firmware ... but same problem , if i press power button is ding , and only way to boot back is by puting the charger in and pres power..
Is possible to delete / re-rwite the hole root folder ? By adb or fastboot ?
So if you can access bootloader flash latest .184 boot.img, recovery.img, droidboot.img and then sideload the full rom
kojata said:
So if you can access bootloader flash latest .184 boot.img, recovery.img, droidboot.img and then sideload the full rom
Click to expand...
Click to collapse
Can you put a link with img files ?
I flashed a full room with flash tool but , still same problem , power button dosent work , and when i try to use it , is bricking the room .
Just google it man. This i found in the first googling http://www.asus-zenfone.com/2015/12/how-to-downgrade-asus-zenfone-2-firmware.html . You can do these steps and than upgrade to latest lollipop or M if you like. Be careful with fastboot flashing though cause many people mistyped the droidboot and hard bricked their devices
hello, i have the same problem with my LG D605.
i cant turn it on. it doesnt even react to charger. the only thing i managed to do is turn it on in download mode and start flashing stock rom... but it turns off in random times when i trying to flash.
did u managed to fully unbrick yours? and how?
..or maybe this turn offs is just low battery thing (?)
as you stated you tried to flash raw.. so you don't need any other files. just extract the raw firmware with winrar. you will get desired files. if asus flash tool not able to flash raw. use fastboot commands to flash firmware.. follow the guide how to flash via commands in the following thread
https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785