I have an International version of ascend p6 -06 with B107.
I was trying to install kitkat into it.Its rooted.
I downloaded the UPDATE.APP from one of the forums.I installed twrp and I thought I can use to flash the new ROM using it,but I couldnt find the option,I read somewhere only the zip files can be installed through TWRP. Whenever I press the volume+ + volume- + power button,the phone starts with the TWRP directly than doing any update .I have put the UPDATE.APP file in dload folder in my SD card,still it was not updating with that given shortcut.
I did a stupid thing just now,I wiped all datas using TWRP and now i have no OS installed ,and like that my phone is bricked.now if i switch on the phone it gets stuck at huawei ascend Logo.and if i press volume up and down buttons along with power button,then it goes to TWRP ..
pls pls pls help me ,and thanks a ton in advance.
I even tried downloading the the original rom from the huawei website and still not able to update using that UPDATE.APP file...
don't panic..
you habe to set your phone into bootloader mode..push power and Volumen + (or -) together and hold them for about 5sec until you See the huawei ascend Logo (it stucks there - thats OK)..
then Connecticut your p6 to the pc and Start your ADB..
depending what Firmware you want (JB or KK) you habe to get a stock recovery IMG..
this can be flashed by ADB using the known commands for flashing recovery..
when you have the stock recovery you can put an update.app (e.g. from the last b511) onto your SD card Ingo the dload folder..
then you habe to unplug your phone from pc and press all three buttons (power and Volumen +/- together) and hold them until you See the Android Figure (force update method)..
should work..
if not then you have to search for the twrp sideload feature (via Google)..
can u help me with starting adb.
blueIBI said:
don't panic..
you habe to set your phone into bootloader mode..push power and Volumen + (or -) together and hold them for about 5sec until you See the huawei ascend Logo (it stucks there - thats OK)..
then Connecticut your p6 to the pc and Start your ADB..
depending what Firmware you want (JB or KK) you habe to get a stock recovery IMG..
this can be flashed by ADB using the known commands for flashing recovery..
when you have the stock recovery you can put an update.app (e.g. from the last b511) onto your SD card Ingo the dload folder..
then you habe to unplug your phone from pc and press all three buttons (power and Volumen +/- together) and hold them until you See the Android Figure (force update method)..
should work..
if not then you have to search for the twrp sideload feature (via Google)..
Click to expand...
Click to collapse
I am sorry to trouble..I am not a PRO in all these like u guys.
how do i start a ADB?? and where to download the stock recovery image?
i am a noob too but made the same experience linke you now..
OK..so first things first..
you have twrp as recovery in your p6..so you have flashed this by "adb fastboot"?
nope
blueIBI said:
i am a noob too but made the same experience linke you now..
OK..so first things first..
you have twrp as recovery in your p6..so you have flashed this by "adb fastboot"?
Click to expand...
Click to collapse
no. I used a huawei P6 toolkit.
OK...then there should be the Option to install/flash a stock recovery..
here comes the next problem
I downloaded the abd driver installer 1.0,it identifies my phone.but once i press the button for installing the error pops up.,incompatible with win 8 (64 bit.)now what to do??
yes but
blueIBI said:
OK...then there should be the Option to install/flash a stock recovery..
Click to expand...
Click to collapse
The option of installing stock recovery is there,but now when i can connecting the phone its not recognising.it shows phone not connected.
hm..
then you should search in Google for the twrp adb sideload features to get a connection between phone and pc
ok let me
blueIBI said:
hm..
then you should search in Google for the twrp adb sideload features to get a connection between phone and pc
Click to expand...
Click to collapse
I will try to find it and will update you
Thank youuuuuuuuuuu
blueIBI said:
hm..
then you should search in Google for the twrp adb sideload features to get a connection between phone and pc
Click to expand...
Click to collapse
I have no words to thank you..finally its done..the adb drivers were not installed well,thats why it was not picked up by the tool.I updated the stock recovery image and it rebooted and installed well...thanks a ton again..and I appreciate your fast replies.I had spend 2 days only in this.its such a releif.:victory::victory:
you are welcome
Again problem
blueIBI said:
you are welcome
Click to expand...
Click to collapse
I am sorry to trouble you again.yesterday i updater to B508 kitkat,but gprs or 3g were not working.so today I downloaded the B512 version.in this version if iam putting the dload file in SD card,it doesnt read it.I have to put this in internal storage itself.This time my phone is stuck in the normal android recovery stage as I dont have TWRP installed (I guess,the same shorcut is not starting TWRP).
And to update to the older version the update.app file should be there in internal storage which i cannot assess at this point since mobile doesnt start..what do I do??
I tried installing TWRP connecting mobile in the present status,but its not installing
hve you tried to do a force update (3 button method)..
it should work when you put the update.app in dload folder in your sdcard..
maybe you have to go to another Version (b122 or b132)..
but the only method that might now work is the 3 buttons (power and vol +/- together)..and you have to hold them until you see the Android figure (can take more then 10 seconds.. be patient)..
if this won't work then i'm too speechless (hadn't this case before)..
hope you geht your p6 running..
again got lucky
blueIBI said:
hve you tried to do a force update (3 button method)..
it should work when you put the update.app in dload folder in your sdcard..
maybe you have to go to another Version (b122 or b132)..
but the only method that might now work is the 3 buttons (power and vol +/- together)..and you have to hold them until you see the Android figure (can take more then 10 seconds.. be patient)..
if this won't work then i'm too speechless (hadn't this case before)..
hope you geht your p6 running..
Click to expand...
Click to collapse
It worked.I fomatted the sd card and left only dload folder .and used the same version which was originally working (508).now its reverted back to normal ..half my tensions are over.but the i wanna change from this rom,in this my internet doesnt work..I wanted to install B510,but for that I have to install B132 first,which i am trying.but its not working.Any idea what should be done.?
try to flash then recovery Form b132 (usw the huawei update extractor to create one..can be found here in then forum)..then via force update you should be able to installiert then b132..and from there it is easy to load then b512 for example (system update local or force update (there you don't need to change the recovery)..
blueIBI said:
try to flash then recovery Form b132 (usw the huawei update extractor to create one..can be found here in then forum)..then via force update you should be able to installiert then b132..and from there it is easy to load then b512 for example (system update local or force update (there you don't need to change the recovery)..
Click to expand...
Click to collapse
You meant I shoould make a recovery for B132 using huawei update extractor.I have the P6 tool with me,if i update a recovery image for jellybean (currently its kitkat) will that be enough??
yes will be enough..
bigger problem
blueIBI said:
yes will be enough..
Click to expand...
Click to collapse
I made B132.zip file and using TWRP i installed it.It showed the istallation was successful,and i rebooted to the system and its stuck in huawei ascend logo and its not moving from there.I tried again using the vol- + vol+ + powerbotton,Its restarting to the sa,me logo.somehow recovery is not working.I think now I am really screwed.
you should not make a ZIP file..
now you are at then beginning again..
Related
This method is tested by me and it worked perfectly. With this guide you will be able to root your U9200 with b113 and b115(android 4.0 and 4.0.3).
I am not responsible for any data loss or bricked devices! You do it on your own risk!
1) Download this zip. The password is: ccc333
2) Extract the zip to your desktop.
3) Download Android SDK Tools from here and install the packages.
4) Plug your Ascend P1 to the PC.
5) Make sure that USB Debugging is checked (Settings -> Developer options -> USB debugging)!
6) Open "b113_b115-root_u9200---__[Nixing]" from your desktop.
7) Run "hwadb.exe".
8) Run "ubl.exe", click ROOT - this should root your device without restart and any problem, check if the Superuser icon has appeared.
After the device is rooted you will need to install recovery.
I used Geno's Recovery - run "Onekey_ROM_Ascendp1.exe" from the zip and the tool will install it.
From this recovery you can flash whatever you want w/o any problems! It's a little bit sad that it is in chinese but oh well...
I will attach a picture of the same recovery but in english so you can see what you are actually doing.
Good luck!
Hi.
When i try run "Onekey_ROM_Ascendp1.exe" i got stuck on reboot stage. Telephone just show Huawei Ascend. BTW Win 7 can't find driver for Blaze. I tried reboot manually with pressed power+volum up keys and recover update.zip. But recovery cant pass signature verification. :crying:
Recovery
lerso said:
Hi.
When i try run "Onekey_ROM_Ascendp1.exe" i got stuck on reboot stage. Telephone just show Huawei Ascend. BTW Win 7 can't find driver for Blaze. I tried reboot manually with pressed power+volum up keys and recover update.zip. But recovery cant pass signature verification. :crying:
Click to expand...
Click to collapse
You can try this to install the recovery image onto the phone without the custom rom.
1. Download Android Control here (mirror) or here (XDA thread) and extract to a folder on your hard drive root (eg. c:\AndroidControl)
2. Download the Recovery image - recovery-new.img (the one included in Onekey) or recovery-off.img (the one that Onekey is based on)
Note: As far as I know, they are both Chinese language but based on ClockWorkMod so should be easy enough to navigate around. Edit: Though judging from the picture above then they may not be Chinese lol
3. Put whichever image you choose into the AndroidControl folder ready to be flashed over.
4. Make sure USB Debugging is enabled on your phone and then switch it off. Hold volume down and power key (I think lol) to boot into download mode (phone should boot to logo and then stop) then plug it into your PC.
5. Open a command prompt and navigate to your Android Control folder, run the following command -
fastboot flash recovery recovery-new.img
or
fastboot flash recovery recovery-off.img
depending which one you chose.
6. Once finished type - 'fastboot reboot' to reboot your phone.
7. Turn off your phone once rebooted and then hold the volume up and power keys to boot into recovery, if its in Chinese you've been successful
I am curious how you install some ROM as .zip file, when all original updates from Huawei have .app as extension.....
Nixing said:
This method is tested by me and it worked perfectly. With this guide you will be able to root your U9200 with b113 and b115(android 4.0 and 4.0.3).
I am not responsible for any data loss or bricked devices! You do it on your own risk!
1) Download this zip. The password is: ccc333
2) Extract the zip to your desktop.
3) Plug your Ascend P1 to the PC.
4) Make sure that USB Debugging is checked (Settings -> Developer options -> USB debugging)!
5) Run "hwadb.exe".
6) Run "ubl.exe" - this should root your device without any problem, check if the Superuser icon has appeared.
After the device is rooted you will need to install recovery.
I used Geno's Recovery - run "Onekey_ROM_Ascendp1.exe" from the zip and the tool will install it.
From this recovery you can flash whatever you want w/o any problems! It's a little bit sad that it is in chinese but oh well...
I will attach a picture of the same recovery but in english so you can see what you are actually doing.
Good luck!
Click to expand...
Click to collapse
In my case it after step 5) it works a little bit different.
When run "Onekey_ROM_Ascendp1.exe" and stuck on reboot stage (just show Huawei Ascend), then you must install a driver for Blaze device manually, you can choose the standard "Android Adapter ADB interface" for this (it works in my case), after intalling the driver Onekey_ROM will resume and install only the recovery image and you phone is showing the Chinese recovery menu choose your "update.zip" or "gapps-signed.zip" from SD-card and it wil be installed (update.zip means your desired firmware).
It seems that the firmware in the Onekey_ROM_Ascendp1 tool will not be placed on the SD-card but in Local Storage, so it will not be installed, therefor put the "gapps-signed.zip" or "update.zip" before flashing on the SD-card so you can select it in Chinese recovery.
I only installed the gapps with original firmware B115 on the phone and all gapps are working.
GRTZ DiMaC
Hi people,
I'm sorry for this little off topic but I don't know where to find other Huawei Ascend P1's users.
I would like to buy this device but before I would like to know if this device is going fine.
In particular way: how is the in call audio quality? Is it missing calls (like other Huawei device U8800 Pro)? How is the Network (GSM and/or UMTS-3G) quality?
Is the price balanced to the overall quality of the device? I just know that the Huawei Ascend P1 is able to record amazing video and the audio quality is really incredible, but the "phone" function, how is it?
Sorry for the off topic.
It's a great news that I can root the device, so probably at 99% I will buy it after reading your comments.
Thank you in advance,
regards,
kalo
Hey, I'm very pleased with my U9200, don't know about the others but everything works fine here. The device's default ROM was working perfect, I managed to root it and eventually changed to MIUI ROM. But yeah, the U9200 is a really good smartphone if you ask me. There are still not enough apps and tweaks for it etc.
Nixing said:
Hey, I'm very pleased with my U9200, don't know about the others but everything works fine here. The device's default ROM was working perfect, I managed to root it and eventually changed to MIUI ROM. But yeah, the U9200 is a really good smartphone if you ask me. There are still not enough apps and tweaks for it etc.
Click to expand...
Click to collapse
Hello brother , plz. update the file link it's not working . Thx for ur effort.much appreciate.
Regards.
Ljm.
Build B218
Hi,
i have the Build B218.
Has anyone rooting?
B218
arcelor said:
Hi,
i have the Build B218.
Has anyone rooting?
Click to expand...
Click to collapse
Try Unlock Root here - Unlock Root 2.3.1 it says it can root the U9200 and might work for your firmware version.
You can also try the method for B113 and B115
How to - Root Huawei Ascend P1 - U9200 B113 and B115 - Johnny Paranoia's Other Blog
or here
How to - Root Huawei Ascend P1 - U9200 B113 and B115 - MadModder
See if it works and post back to let everyone know
ljmchinastar said:
Hello brother , plz. update the file link it's not working . Thx for ur effort.much appreciate.
Regards.
Ljm.
Click to expand...
Click to collapse
The links to my sites above have links to the tools and the link to OneKey's rom is also there on the - How to Install Root and Recovery on Huawei U9200 - Ascend P1 post
I didn't mirror nixings full download without his permission, though I will if he would like me to (Although I would have to remove the password because I don't like them lol)
Hope this helps
The main link for "b113_b115-root_u9200---__[Nixing]" works as well now, thanks for all your PMs!
Download Mode
Hey,
is there any trick to get into Download Mode/Fastboot?
Should I press both at the same time? When do I release them..
With Vol. Down + Power Key i don't get into Download Mode..
I just managed to get there once, but I don't remenber how I did it.
And by the way. When I press Vol.Up und Power, I get to the android recovery, stock. where I can do a wipe or apply a update from sdcard.
Pease let me known
jensema
EDIT:
Got it. Hold VOL. Down and then Plug in USB Cable.
Phone in Download Mode.
Now I need the right drivers.
Phone shows a "Blaze"
Can someone tell me which driver to use.
thanks
2.EDIT: Got it. Under Win7 , installing Hi Suite, then change Driver for "Blaze" to Android ADB Interface.
Fastboot working!
arcelor said:
Hi,
i have the Build B218.
Has anyone rooting?
Click to expand...
Click to collapse
Hey arcelor,
have you tried rooting Build B218?
I also have this Build, all I did so far is booting cwm_touch_recovery_viva_beta.img and making a backup.
jensema
b113_b115-root_u9200---__[Nixing] mirror
Nixing has given me permission to mirror his download so here it is - b113_b115-root_u9200--__[Nixing] mirror
jensema said:
Hey arcelor,
have you tried rooting Build B218?
I also have this Build, all I did so far is booting cwm_touch_recovery_viva_beta.img and making a backup.
jensema
Click to expand...
Click to collapse
Hi jensema,
root and recovery works with B218 !:good:
http://www.mediafire.com/?7pdfh11ue8ykyk6
http://madmodder.co.uk/huawei/u9200/how-to-root-huawei-ascend-p1-u9200.htm
http://www.android-hilfe.de/huawei-ascend-p1-p1-s-forum/275267-root-recovery.html
Arcelor
Has anyone updated with cwm-recovery on B219?
http://www.huaweidevice.com/worldwide/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDY0NjU=
WIND Mobile Huawei Ascend P1 (U9200)
Just to confirm, I just tested the root method on a WIND Mobile Ascend P1 with U9200-1V100R001CANC113B100 and it rooted fine. I haven't tested the clockwork mod yet as there is no where to download this version of the stock rom.
JohnnyParanoia said:
You can try this to install the recovery image onto the phone without the custom rom.
1. Download Android Control here (mirror) or here (XDA thread) and extract to a folder on your hard drive root (eg. c:\AndroidControl)
2. Download the Recovery image - recovery-new.img (the one included in Onekey) or recovery-off.img (the one that Onekey is based on)
Note: As far as I know, they are both Chinese language but based on ClockWorkMod so should be easy enough to navigate around. Edit: Though judging from the picture above then they may not be Chinese lol
3. Put whichever image you choose into the AndroidControl folder ready to be flashed over.
4. Make sure USB Debugging is enabled on your phone and then switch it off. Hold volume down and power key (I think lol) to boot into download mode (phone should boot to logo and then stop) then plug it into your PC.
5. Open a command prompt and navigate to your Android Control folder, run the following command -
fastboot flash recovery recovery-new.img
or
fastboot flash recovery recovery-off.img
depending which one you chose.
6. Once finished type - 'fastboot reboot' to reboot your phone.
7. Turn off your phone once rebooted and then hold the volume up and power keys to boot into recovery, if its in Chinese you've been successful
Click to expand...
Click to collapse
I want to install the new version B118
I can not update with the alternate recovery
How can I get back to the original recovery.img?
Safe to update Superuser?
I have also successfully rooted my Wind Mobile, build U9200-1V100R001CANC113B104. Just wondering if it's safe to update Superuser (update available through system updates).
djstyles97 said:
Just to confirm, I just tested the root method on a WIND Mobile Ascend P1 with U9200-1V100R001CANC113B100 and it rooted fine. I haven't tested the clockwork mod yet as there is no where to download this version of the stock rom.
Click to expand...
Click to collapse
Did not work on my Wind pentaband P1, the firmware version on mine is B105.
hi there,
i was on HYD52ROM V2 for the Ascend P6.
I decided to do an upgrade to the KitKat Version of HYD52ROM. So i installed the TouchRecoveryInstaller-v1_01.apk and rebooted. I had the newest file of the Rom on my SD-Card. I wiped the phone and the dalvik also.
Then it said, that there is an error while installing the KitKat Rom.
I thought "no problem" - i had the old V2 on my sd card also.
Now only the bootscreen "Huawei Ascend" appears and nothing more. I can switch off the phone while hitting all the buttons but nothing more. Is there any possibility to get it back working?
If so, please a short step by step will do it.
Thanks!
piepsys said:
hi there,
i was on HYD52ROM V2 for the Ascend P6.
I decided to do an upgrade to the KitKat Version of HYD52ROM. So i installed the TouchRecoveryInstaller-v1_01.apk and rebooted. I had the newest file of the Rom on my SD-Card. I wiped the phone and the dalvik also.
Then it said, that there is an error while installing the KitKat Rom.
I thought "no problem" - i had the old V2 on my sd card also.
Now only the bootscreen "Huawei Ascend" appears and nothing more. I can switch off the phone while hitting all the buttons but nothing more. Is there any possibility to get it back working?
If so, please a short step by step will do it.
Thanks!
Click to expand...
Click to collapse
Only soft bricked, install stock recovery.
http://forum.xda-developers.com/showpost.php?p=51066019&postcount=14
ok thank you for your answer...
means i have to put the "UPDATE.APP" in the DLOAD-folder on the sd?
two more questions...
1) is it important which original firmware version?
2) i have downloaded the "Huawei Update Extractor" ... what to do with it? Do you have a link for the stock recovery? I haven´t read s.th. about it :-/
Regards
piepsys said:
ok thank you for your answer...
means i have to put the "UPDATE.APP" in the DLOAD-folder on the sd?
Click to expand...
Click to collapse
Just updated my last post same time when you wrote.. check the link
ok thank you. i will check the link
The problem i have ... how to -> Put your device in fastboot mode ( > adb reboot bootloader )
Never done this BIG SORRY
piepsys said:
ok thank you. i will check the link
The problem i have ... how to -> Put your device in fastboot mode ( > adb reboot bootloader )
Never done this BIG SORRY
Click to expand...
Click to collapse
Download http://forum.xda-developers.com/showthread.php?t=2588979
Press y and then n
Then download http://www.androidfilehost.com/?fid=23252070760973625
and extract it to c:\adb then press sift and right click and go to open commandwindow here
then write: adb reboot bootloader
then: fastboot flash recovery recovery.img
and last: fastboot reboot
Then download firmware (latest international is: https://mega.co.nz/#!N8BAxZYJ!8cOp8imgnLxNMfUjCDoBtzR69tz7nLYccL2-VMG4If8 ).
Extract that and make dload folder to your external sd card. and put update.app in to it.. then press power+volumeup+volume down when phone restarts, and it starts to install stock firmware
worked! thanx a lot for your help!!!
Hey guys. I was on Kitkat Beta CN with TWRP. I wanted to update to B512 so I reverted to the original recovery B506CN recovery (downloaded it from here http://forum.xda-developers.com/showthread.php?t=2709353)
Once I pressed local update the phone reboots but I get the following error message:
Huawei SD card update fail.....
The update is /dload/update.app
Why do I get this error message and how to fix it in order to update to B512
try one of these http://forum.xda-developers.com/ascend-p6/help/p6-u06-common-issues-fixes-t2843810#post54736765 or http://forum.xda-developers.com/ascend-p6/development/diy-rom-b510-based-add-want-t2843511
Tried many different combinations and nothing helped seems this problem is binded to my SD card. I tried different recovery versions and tried to update when I had 3 different roms. It seems I can't update with the stock recovery no matter what I do. I tried doing that in the internal storage but still the same mistake? Why should it access the SD card for an update in the internal storage?
When I enter recovery manually (without going at update section in settings) I see at first screen this message and I have to restart to enter at the recovery
ro.build.version.release = 4.4.2
ro.product.name = VEDGE
Current build version release is not 4.2 - don't need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is unlock state
Do you also see it or is this a clue?
Igano said:
When I enter recovery manually (without going at update section in settings) I see at first screen this message and I have to restart to enter at the recovery
ro.build.version.release = 4.4.2
ro.product.name = VEDGE
Current build version release is not 4.2 - don't need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is unlock state
Do you also see it or is this a clue?
Click to expand...
Click to collapse
You should unplug your device from usb and then reboot to recovery because u can read there "USB Update Enter" that means your device is pluged to a pc
Igano said:
Tried many different combinations and nothing helped seems this problem is binded to my SD card. I tried different recovery versions and tried to update when I had 3 different roms. It seems I can't update with the stock recovery no matter what I do. I tried doing that in the internal storage but still the same mistake? Why should it access the SD card for an update in the internal storage?
Click to expand...
Click to collapse
Have you tried using the file to downgrade back to Jelly bean from KitKat?
https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4
Download the file, and place the dload folder onto your sd card, and do a local update as usual. When that is done, your phone will reboot normally. Just replace the dload folder with the one from B512, and try updating again. If it still doesn't work, I'd suggest doing a forced update using the 3-button method (power button & volume keys).
dl this first http://www.androidfilehost.com/?fid=23252070760973625
extract it's file in your adb dir
You also could try this > run cmd on your pc >use
adb reboot bootloader
fastboot flash recovery "full name of the file extracted from the downloaded file inc it's extension"
fastboot reboot
then you could try flashing again
astrit1 said:
You should unplug your device from usb and then reboot to recovery because u can read there "USB Update Enter" that means your device is pluged to a pc
Click to expand...
Click to collapse
Yes I tried and it's still the same fails.
miz_pimp said:
Have you tried using the file to downgrade back to Jelly bean from KitKat?
https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4
Download the file, and place the dload folder onto your sd card, and do a local update as usual. When that is done, your phone will reboot normally. Just replace the dload folder with the one from B512, and try updating again. If it still doesn't work, I'd suggest doing a forced update using the 3-button method (power button & volume keys).
Click to expand...
Click to collapse
Did with your file and just any other rom I could find in the forum, still the same error
digijedi007 said:
dl this first http://www.androidfilehost.com/?fid=23252070760973625
extract it's file in your adb dir
You also could try this > run cmd on your pc >use
adb reboot bootloader
fastboot flash recovery "full name of the file extracted from the downloaded file inc it's extension"
fastboot reboot
then you could try flashing again
Click to expand...
Click to collapse
I tried and this recovery causes a constant vibrating when in recovery mode, apart from that I still get the same errors.
My only fast and easy solution would be if someone uploaded a B512 repack for TWRP. That would be awesome, right now I just use the B513 repack. I don't think I can find the fix to this any more.
hello all bro
i have p6-u06
only hung at huawei ascend
cant go recovery using volum down and power
please hellllllllllllllllllp
Have you tried to turn it off and on again? That was not a joke. Press the POWER Button for 10-15 sec and when the screen goes black use the VOL UP + VOL DOWN + POWER Button. Now you shuld get to the recovery. Please use Ascend P6 Q&A, Help & Troubleshooting the next time.
RabbidZ said:
Have you tried to turn it off and on again? That was not a joke. Press the POWER Button for 10-15 sec and when the screen goes black use the VOL UP + VOL DOWN + POWER Button. Now you shuld get to the recovery. Please use Ascend P6 Q&A, Help & Troubleshooting the next time.
Click to expand...
Click to collapse
hi bro
i did but not slove please help me
i download this
http://consumer.huawei.com/en/mobile-phones/support/downloads/p6-u06-en.htm#anchor
and i put dallod insid memory
and follw instraction but cant go to donloawd mod
please help me
im sosorry my langug is wake
RabbidZ said:
Have you tried to turn it off and on again? That was not a joke. Press the POWER Button for 10-15 sec and when the screen goes black use the VOL UP + VOL DOWN + POWER Button. Now you shuld get to the recovery. Please use Ascend P6 Q&A, Help & Troubleshooting the next time.
Click to expand...
Click to collapse
hi bro
iafter put software dallod insid memory card
i choos apply update from extrnal storge but not slove fail
nokia alkng said:
any one help me plaz
Click to expand...
Click to collapse
Your phone boot or not ?
"Yes" > You can update throught the settings > More info > Update > Local Update
The update.app need to be in \sdcard\dload folder if you don't have create it If the dl file is a .zip unzip it into you will see the update.app
and if you allow debuging mode (Spam the build number in settings > More info and you will be allow to access to the dev section (in settings) and tick debugging mode then connect to your pc (check the debugging mode in the notification bar)) you can now access to the recovery using adb
For Adb you can dl it here > http://forum.xda-developers.com/showthread.php?t=2636231 and follow the instruction to connect your phone then write this line in the command window
Code:
adb reboot recovery
your phone will boot into recovery
To update The update.app need to be in \sdcard\dload folder if you don't have create it If the dl file is a .zip unzip it into you will see the update.app
The version you have dl is old, latest JB is B132 and KK is B513 for the p6-u06 international (these rom are multilanguages)
Skyllery said:
Your phone boot or not ?
"Yes" > You can update throught the settings > More info > Update > Local Update
The update.app need to be in \sdcard\dload folder if you don't have
create it
and if you allow debuging mode you can access to the recovery using adb
Code:
adb reboot recovery
Click to expand...
Click to collapse
bro im so sorry to late but phone cant boot and no usb debug and stell hung logo android plz.please pleassss help me:crying:
bro
USB Debuggin not open plz help me pleaseeeeeee
hi all
i use this
"TWRP Installer by bokchoi2020"
"Credits to Surdu and TeamWin"
"Make sure your system is in Android right now, usb debugging turned on."
"Reboot to bootloader..."
error: device not found
"Installing TWRP...."
< waiting for device >
"Rebooting to system..."
< waiting for device >
Press any key to continue . . .
please help me
Hello,
I´m Trying to make this (http://forum.xda-developers.com/show....php?t=2630208) work on my Huawei,
but i´ve run into some problems.
I cant get my phone to go in fastboot and ADB keeps saying Waiting for devices or says Error device not found.
This image shows what im getting if i connect my phone to my PC and reboot it using VOL UP + VOL DOWN + POWER
(USB Update Enter. . .
HUAWEI SDCARD AND USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is LOCK state.)
im sure my phone is running the right Firmware ( B118) here is a screenshot please tell me if im doing anything wrong.
please help
nokia alkng said:
help me pleaseeeeeeeeeeeeeeeeeeee
Click to expand...
Click to collapse
Tried the search-function yet?
There are several howto's for it
nokia alkng said:
who help me i will donat himmmmm:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Hi guys,
I can get to recovery mode and the initial splash screen, but not into Android OS on my Huawei p6 U06.
I tried reflashing the rom via SD card with UPDATE.APP B111, but it still fails to boot and hangs on the splash screen.
Another weird thing is that my splash screen doesn't show the huawei logo but an android logo....
I tried to adb the phone but there are no suitable drivers for phones in recovery mode... only for USB developer mode...
Hopefully there is a fix to this.
Thanks guys.
nokia alkng said:
hi all
i use this
"TWRP Installer by bokchoi2020"
"Credits to Surdu and TeamWin"
"Make sure your system is in Android right now, usb debugging turned on."
"Reboot to bootloader..."
error: device not found
"Installing TWRP...."
< waiting for device >
"Rebooting to system..."
< waiting for device >
Press any key to continue . . .
please help me
Click to expand...
Click to collapse
The debugging mode is off so the device can't be found by adb.
If you can't use stock recovery and you can't flash any recovery because you can't access throught adb, your phone don't boot .. I don't know what to tell you .. your phone is dead ? .. how your phone is in this condition ?
Another weird thing is that my splash screen doesn't show the huawei logo but an android logo....
Click to expand...
Click to collapse
Fake Ascend P6 or not the good version so the update brick the phone ?
hi bro
good day
thanx to reply
my phone not dead stell lif in hospatel but now is hung at android logo and can go to recovery to wip cach and wip data its all those done but stell problem not slove stell hung android logo please help me
nokia alkng said:
hi bro
good day
thanx to reply
my phone not dead stell lif in hospatel but now is hung at android logo and can go to recovery to wip cach and wip data its all those done but stell problem not slove stell hung android logo please help me
Click to expand...
Click to collapse
Which Recovery ? Stock or TWRP ?
You can't flash/update ?
I tried reflashing the rom via SD card with UPDATE.APP B111, but it still fails to boot and hangs on the splash screen.
Click to expand...
Click to collapse
Stock :
Try with B125 or B132 because B111 is too old maybe it's the cause of the problem.
sdcard\dload\Update.app and reboot into recovery "Power (hold) + Volume up (hold) +Volume Down (hold) then when you see the ascend logo just Volume + & - (hold)
ok bro
thanx i was busy to day
so i will try tomorow
thanx aloot again
Skyllery said:
Which Recovery ? Stock or TWRP ?
You can't flash/update ?
Stock :
Try with B125 or B132 because B111 is too old maybe it's the cause of the problem.
sdcard\dload\Update.app and reboot into recovery "Power (hold) + Volume up (hold) +Volume Down (hold) then when you see the ascend logo just Volume + & - (hold)
Click to expand...
Click to collapse
hi bro
i dwoload p6-b132 and put dallod insid sdcard and the problem when just press volume +&- go to recovery only and gave me 5 choosin
1- reboot system now
2-apply update from extrnal stoarge
3- wipe data/factory
4- wipe cache partition
5-apply update from cach
when i choos apply update from extrnal stoarge and select dload no theing apper all empty folder like 00/
and is F A I L
please help :crying:
nokia alkng said:
hi bro
i dwoload p6-b132 and put dallod insid sdcard and the problem when just press volume +&- go to recovery only and gave me 5 choosin
1- reboot system now
2-apply update from extrnal stoarge
3- wipe data/factory
4- wipe cache partition
5-apply update from cach
when i choos apply update from extrnal stoarge and select dload no theing apper all empty folder like 00/
and is F A I L
please help :crying:
Click to expand...
Click to collapse
Have you put Update.app in /sdcard/dload ?
You can try with a formatted sdcard sometimes it's the problem
hi bro
i format sd card 2 gb fat32
and put dlaod insid memory card and go recovery and i changed other sdcard sandisk 4gb but not slove my problem please help me
Skyllery said:
Have you put Update.app in /sdcard/dload ?
You can try with a formatted sdcard sometimes it's the problem
Click to expand...
Click to collapse
bro bro bro:crying::crying::crying:
i did i format and chang 3 memory card and same problem
pleaeeeeee help :crying::crying:
Can anyone share B512 stock recovery please
maticex said:
Can anyone share B512 stock recovery please
Click to expand...
Click to collapse
You have modified build.prop file and thats why it keeps failing.. Download B132 firmware and put it to your sdcard/dload folder. What i say 3days/3 topics ago.
ADHDDHDA said:
You have modified build.prop file and thats why it keeps failing.. Download B132 firmware and put it to your sdcard/dload folder. What i say 3days/3 topics ago.
Click to expand...
Click to collapse
I don't know how but there isn't that message anymore, there is only sd card update fail everytime
try another sdcard..
Gesendet von meinem P6-U06
here's B512 recovery
Hi there,
Here's the recovery (inside the .7z file).
Hotfingers said:
Hi there,
Here's the recovery (inside the .7z file).
Click to expand...
Click to collapse
Thank you
Anyone know how to come in fastboot mode with only stock recovery installed and no rom installed, because there is no devices showing in adb
maticex said:
Thank you
Anyone know how to come in fastboot mode with only stock recovery installed and no rom installed, because there is no devices showing in adb
Click to expand...
Click to collapse
OK, if you want to try getting adb and fastboot to work. Try these links...
http://forum.xda-developers.com/showthread.php?t=2588979
http://forum.xda-developers.com/showthread.php?t=2646453
If you want to flash a stock rom. Then on your EXTERNAL SDCard
* Create a folder called "dload"
* put the "UPDATE.APP" from the stock rom into the dload folder.
* power off your phone.
* hold volume up and volume down at the same time (keep them both pressed in).
* now use your third hand to press the power button.
* When the phone starts up keep holding the volume up and volume down buttons until the stock recovery starts up...
(this all doesn't work if your phone is plugged into the usb cable at the time, so you need at least 25% battery to do this).
good luck