Develop Bugs

Annoying sound problem

Hello. I have a problem with sound in my kaiser with Android. I tried 2 systems [Cynanogen mod 6 (Froyo) and Myn's Warm Donut], 4 radios (from 1.71 to 1.65) and 2 kernels. Sound never appeared. Why?

what zimage or nbh you using if you are using a older one it might have problems

Did you mean kernel? the newest from this page:
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D

it may be that you have muted the media volume in settings.

No. I don't have any sound. Not only media. When someone calls to me, I cannot hear him too and this person cant hear me too.

Audio issue
I have the same problem. I tried different builds and nothing helps. Any suggestions??

Just a thought, but have you tried flashing a stock rom, then flashing to nand again? Flashing a stock rom clears the entire nand, leaving no possibility of stray bits of data left from custom roms.

I have to say, I get the same thing, but with a slight variation. Sound works for me up until i make at least one call (but could happen before that). Once I make that call, either during the call, or after, the sound is gone. I too had myn's donut, and then frayo, and both times, the exact same problem. I will try to flash the stock rom, and then back to android, but it is a problem that I also share.
This is my first post on xda, so please be nice!

<refresh>.

Mu_aawiyah said:
I have to say, I get the same thing, but with a slight variation. Sound works for me up until i make at least one call (but could happen before that). Once I make that call, either during the call, or after, the sound is gone. I too had myn's donut, and then frayo, and both times, the exact same problem. I will try to flash the stock rom, and then back to android, but it is a problem that I also share.
This is my first post on xda, so please be nice!
Click to expand...
Click to collapse
Yeah, flashed it back to a the most recent stock rom, and then back to andriod.. how works perfectly. Sorry i didnt tell you guys earlier.
I think it was to do with the radio thingy-ma-jig. I flashed it with winmo 6.1 from htc website, and then back again.
Now i'm runnying frayo.

I flashed the newest stock rom from htc site too, then 1.65 radio, but it didn't help :/

Wagierek said:
I flashed the newest stock rom from htc site too, then 1.65 radio, but it didn't help :/
Click to expand...
Click to collapse
That is most likely because you didnt flash it right. take the .nhb from it, plug it into your sd card and flash it from sd. try that.

I'm not stupid. I always flash anything like that-not via CustomRUU-because I have damaged my USB socket and now my Kaiser cannot be recognized by computer.
PS: Today when I booted my Kaiser, next to ANDROID word, I saw "handset status changed to 1". When I rebooted, it didn't show. What's this?

Wagierek said:
I'm not stupid. I always flash anything like that-not via CustomRUU-because I have damaged my USB socket and now my Kaiser cannot be recognized by computer.
PS: Today when I booted my Kaiser, next to ANDROID word, I saw "handset status changed to 1". When I rebooted, it didn't show. What's this?
Click to expand...
Click to collapse
Well, with regards to how I got it fixed (the detailed explanation), i flashed it with a custom winmob rom initially, but surprisingly, the same problem i had with android was happening with the winmob. I could make a call after reboot, but after that call, the sound completely died, and the camera did not work. So i tried to flash with the latest stock rom. I've uploaded the actual roms i used on my public drop box folder here => "i tried posting the link, but because i'm new, it wouldnt allow me...pm me"
I am not a professional on flashing, rather i am a beginner. My tytn 2 is a european T-mobile version. I tried to flash it, it did it half way...then stopped! I tried to do it again, but then it just said "...loading..." and would not go past it. But when i booted to my custom rom, it was still there, but the problems had gone. I guessed that it flashed the radio, and nothing else.
When i then went to android, it worked perfectly.
That was my journey.
I hope that helped... maybe.

Unfortunately, it didn't help.
Any other ideas?

I solved mine by changing radio ROM,but i lost sound and camera in windows,any ROM that fit both android and windows???

What version did you flash?

1.65.14.06

Me too!
I flahsed froyo last night and didn't test after makng calls. I'm having the same issue (lose sound after a phone call). I followed the sticky guide and sim unlocked the radio before flashing (which I think I had already done before). I will try changing radios when I get home to see if this resolves the issue and post my results.
Update: I flashed 1.71.09.01 on my ATT Tilt and this fixed the issue. Now sound and camera work great. Phone runs faster also!

[Q] What is wrong with my Gnex?

Hey the Problem is the following:
3-5 random reboots every day
restarts during every phonecall after 1-3 Minutes
freezes when in standby, cant turn back on -> need to take battery out
often slow, especially when switching apps. or when typing
I have tried stock 4.3, CM10.2 recently and before that CM10.1 for a while.
I already send it in but they only said my battery is broken.
Is it possible that all my problems come from this?
I rather think my flash memory is broken? What you think?

JonnyZaggi said:
Hey the Problem is the following:
3-5 random reboots every day
restarts during every phonecall after 1-3 Minutes
freezes when in standby, cant turn back on -> need to take battery out
often slow, especially when switching apps. or when typing
I have tried stock 4.3, CM10.2 recently and before that CM10.1 for a while.
I already send it in but they only said my battery is broken.
Is it possible that all my problems come from this?
I rather think my flash memory is broken? What you think?
Click to expand...
Click to collapse
Since yesterday I am facing the same problems you are describing. At first I thought it was a bad flash or something like that. Clean installed various 4.3 costum roms and it's always the same.
Right now I will look deeper into it since the phone is unusable in that condition.
If I find a solution I will comment.
Best regards
Edit: Okay, works again flawlessly. I simply flashed an nightly from carbon-rom and the lags were gone. Hope it helps. What exactly caused the lag I don't know. For now I am staying on 4.2.2 Carbon as it is my favourite rom anyway and I will wait till there are stable 4.3 from carbon.

Are you sure it's the phone and not an app?

chrisinsocalif said:
Are you sure it's the phone and not an app?
Click to expand...
Click to collapse
Not pretty sure, but it still occured after countless factory resets, wipe cache, wipe dalvic cache and wipe system via TWRP.

Have you tried a clean install without installing apps to see if you get a reboot to eliminate an app as a possible cause?
Sent from my Nexus 7 using Tapatalk 4

chrisinsocalif said:
Have you tried a clean install without installing apps to see if you get a reboot to eliminate an app as a possible cause?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Yes I did. I only flashed for example newest PA and their PA Gapps.
So far I resolved it by "downgrading" to a 4.2.2 nightly from carbon. The lags are completly gone. I will stay and wait till carbon has stable 4.3.

why dont people try stock when they are having problems? going from 1 custom rom to the next does not prove it is the phone.
please fastboot flash the stock rom and do not restore any apps/data other than say your google acct

Zepius said:
why dont people try stock when they are having problems? going from 1 custom rom to the next does not prove it is the phone.
please fastboot flash the stock rom and do not restore any apps/data other than say your google acct
Click to expand...
Click to collapse
Already did that.

I am having the same/similar problems with my GNex too. Specifically bullets [1-3] from the original post. I am running unmodified yakjuux and have tried with just my google account with no other apps and the same problem exists.
Mine makes a noticeable "click" sound with a vibration followed by a reboot.
It usually happens during calls and after it boots the phone call log shows no record of the incoming/outgoing call that just happened. Its like a blue screen of death for android!
I have sent the phone back to Samsung's warranty service 4 separate times and each time they reported no trouble found in the completion report. They just factory reset or put an older version of jelly bean back on the phone and send it back to me with some notes of PRL updates and other nonsense to make it seem like they did something to fix it.
Does anyone have any suggestions (logs, adb, etc) how I can help prove to Samsung/service absolute that the phone is a lemon (other than trying to video tape the phone hoping it reboots - because that is the last resort)?
I already escalated to executive customer service and they refused an exchange because the completion reports show no trouble found :crying:
Thx!

well... I also have this problem.
First happened when I flash Cm10.2 nightly (don't remember which one).
Then I flash PA, or whatever... Looks like the random reboot relating to notifications? It's usually happened when whatsapp notification coming in, but not always.
But a few weeks ago I flashed stock ROM rooted (via TWRP, not fastboot).
The problems solved. No random reboots anymore. Then today I tried latest CM10.2, and it happened again... Wonder why... Looks like it's a very rare problems.
Interesting to see someone having the same problem...
Now I want to flash stock ROM via fastboot to check if it'll fix.
Btw, I can flash directly to CM 10.2 from 10.1, can't I? Or I should flash 4.3 via fastboot first?

lonestrider said:
Btw, I can flash directly to CM 10.2 from 10.1, can't I? Or I should flash 4.3 via fastboot first?
Click to expand...
Click to collapse
I believe CM offers an upgrade option somewhere in the system settings. Unless you want to wipe your phone and flash directly to 10.2 in which case I do not think you need to flash stock 4.3 first. Maybe just do a reset within 10.1 before you flash CM10.2 via whatever recovery (clockwork etc) you are using but even that may be unnecessary.
My 1 year warranty expires this month so if I can't manage to get something out of Samsung I am going to play around with flashing stock 4.3 as you suggested. I have tried converting yakjuux to yakju in the past but still saw the problem then which made me revert back to yakjuux so I could send the phone back for service).

Problems with audio in calls from handset since changing to 5.0gpe

sorry if this is abit long winded,
hey everyone, not sure whats going on here. this is the tmob variant but i had moved over to a gt-i9505 rom dandroids stock gpe 5.0 back almost a month ago, this was upgraded from jamals 4.4.4 gpe which was working great. i installed the googly 1.2.3d kernel and that was also working well. i noticed that i forgot to fully reset all my storage and noticed jamal brought out a 5.0 rom so i swaped to that and wiped everything about a week ago and at first didint notice any issues.
then i recived a call and answered it on the handset and for the first few mins it was working fine all of a sudden something glitched and i had no audio like the call droped i hung up called back no audio. reset the phone same thing. just a day before this happened i updated the kernel to 1.2.5 googly for gpe5, so i figure this is it so i reflash and reset storage and no change. oddly this entire time there have been no problems with calls when using my bluetooth headset.
long story short i have installed and wiped one about 3 different roms including the dandroid that was working ok. i am now all the way back to the 4.4.4 jamal rom that i was on before i started and the problem is persisting. when i call someone the other party hears a high pitch squealing sound but only via the handset the "ok google" is working fine. i have not restored the nandroid backup yet.
baseband is m919uvufnb4
i have the current version of the twrp as what i have been installing everything from.
happy to provide more info. i know im still on the pre knox bootloader
and when i get home im going to try my wife sim see if that changes anything.
Update
Wife's sim changed nothing
Also wanted to say that I also read about a apn reset trick that was supposed to help. I did fix it one time but it recurred again and and since stopped working

Having that same issue gpe 9505 5.0 no audio in calls unless I'm using Bluetooth no handset no speaker

You guys Ned to update your bootloader and everything will be fixed.
You can only get so far with ancient bootloaders before the wheels come off.
Pp.

How do you do that

You need to Odin the latest version NK2, you can find it in general section, ShinySide has a mega link to download firmware.
Follow instructions and you will have a S4 that works properly.
You can use chainfire's auto root in original development to root.
Pp.

GPS not working on SlimKat 4.4.4

Hello,
So I've flashed before Slimbean, but had problems with the "can't connect to camera" problem, so I decided to flash Slimkat 4.4.4 which fixed the camera problem.
New problem now is that i can't get any gps signal. I can turn it on, but no signal. Anyone have a solution to this, or is experiencing the same problem?
Downloaded from here: http://www.slimroms.net/index.php/downloads/dlsearch/viewcategory/1074-d2att-d2tmo

drakemiller40 said:
Hello,
So I've flashed before Slimbean, but had problems with the "can't connect to camera" problem, so I decided to flash Slimkat 4.4.4 which fixed the camera problem.
New problem now is that i can't get any gps signal. I can turn it on, but no signal. Anyone have a solution to this, or is experiencing the same problem?
Downloaded from here: http://www.slimroms.net/index.php/downloads/dlsearch/viewcategory/1074-d2att-d2tmo
Click to expand...
Click to collapse
Hi, the link you provided points to build 4. You can find build 9 which is the latest slimkat here http://www.slimroms.net/index.php/downloads/dlsearch/viewcategory/1183-d2lte
This is the one I have for my Koodo I747M. *note camera seemed a little buggy in some instances, so I installed open camera. Seemed to work a lot better.

I'll give it a try, thanks for the help. Quick question, will this work on my phone model without bricking? I only tried the at&t not the d2lte.
Also can you send me the link for this open camera you were talking about for my device as well?

drakemiller40 said:
I'll give it a try, thanks for the help. Quick question, will this work on my phone model without bricking? I only tried the at&t not the d2lte.
Also can you send me the link for this open camera you were talking about for my device as well?
Click to expand...
Click to collapse
I'd imagine it should be ok, since we have the same phone pretty much I'm on koodo which is pretty much telus without the customer service hehe. for kitkat at the end of development they basically lumped a d2att, d2tmo etc together. (this has reverted for the lollipop builds out there).
The last OTA I got was FOB1, so you may want to go to stock to ota to the latest updates from telus. Just so you have the latest bootloader/firmware. But that's up to you of course.
It's a google play app open source, the slimkat one I had seemed to lockup when switching from front to back camera and from camera to video. https://play.google.com/store/apps/details?id=net.sourceforge.opencamera&hl=en
What are you using to flash them?

serathe said:
I'd imagine it should be ok, since we have the same phone pretty much I'm on koodo which is pretty much telus without the customer service hehe. for kitkat at the end of development they basically lumped a d2att, d2tmo etc together. (this has reverted for the lollipop builds out there).
The last OTA I got was FOB1, so you may want to go to stock to ota to the latest updates from telus. Just so you have the latest bootloader/firmware. But that's up to you of course.
It's a google play app open source, the slimkat one I had seemed to lockup when switching from front to back camera and from camera to video. https://play.google.com/store/apps/details?id=net.sourceforge.opencamera&hl=en
What are you using to flash them?
Click to expand...
Click to collapse
Im not very experienced lol and got lost on:
"The last OTA I got was FOB1, so you may want to go to stock to ota to the latest updates from telus. Just so you have the latest bootloader/firmware. But that's up to you of course. "
I'm using TWRP

Ah, ok I just keep a backup in case anything goes bad flashing roms. If you use TWRP to flash them it only affects the boot image, data and system. So if you have problems you can restore from backup nice and easy.
I'm swapping between a few right now. So far my only uh oh experience was when I tried to upgrade TWRP, no problems with roms. But I use TWRP as well, works great.
Basically the baseband version on our phone, it's the radio and bootloader. Before I had rooted it I had gotten the latest updates by checking for updates. It downloaded and upgraded to FOB1 (Baseband I747MVLUFOB1), then I rooted and played with flashing. Not sure if you made a backup of your original install before trying another rom. But it's not a necessity for slimkat, I don't believe.

serathe said:
Ah, ok I just keep a backup in case anything goes bad flashing roms. If you use TWRP to flash them it only affects the boot image, data and system. So if you have problems you can restore from backup nice and easy.
I'm swapping between a few right now. So far my only uh oh experience was when I tried to upgrade TWRP, no problems with roms. But I use TWRP as well, works great.
Basically the baseband version on our phone, it's the radio and bootloader. Before I had rooted it I had gotten the latest updates by checking for updates. It downloaded and upgraded to FOB1 (Baseband I747MVLUFOB1), then I rooted and played with flashing. Not sure if you made a backup of your original install before trying another rom. But it's not a necessity for slimkat, I don't believe.
Click to expand...
Click to collapse
Yeah I always create a nandroid and backup my IME.

drakemiller40 said:
Hello,
So I've flashed before Slimbean, but had problems with the "can't connect to camera" problem, so I decided to flash Slimkat 4.4.4 which fixed the camera problem.
New problem now is that i can't get any gps signal. I can turn it on, but no signal. Anyone have a solution to this, or is experiencing the same problem?
Downloaded from here: http://www.slimroms.net/index.php/downloads/dlsearch/viewcategory/1074-d2att-d2tmo
Click to expand...
Click to collapse
First thing to try for GPS problems is taking off the back cover and snugging up all the little screws around the phone. Sometimes they work their way loose and the GPS antenna seems to be the first thing to suffer from it.
If that doesn't cure it you might need to flash a stock or at least stock based ROM and rebuild the nvram. Here's a link that describes how to do that if you need to.

Weird Power Issue with all custom RoMs

So I took out my age old xperia M(single sim) a couple of days ago and installed cm 12.1 on it. The only issue I'm facing with it is that if I keep the phone on standby for a while the phone completely and silently shuts itself off. When this happens it doesn't turn on with the power key as well so the only way to turn it on after this happens is by removing and re inserting the battery and then pressing the power button. (phone boots normally then)
This problem only appears when the phone is in standby. I could use it 2hrs straight and the phone would keep functioning normally as long as I don't keep it on standby for a long period.
I've tried tons of different cm12.1 roms and factory reset the phone multiple times but the problem is there with every single rom. Haven't tried any rom that isn't based on 12.1 yet.
Strange thing is that this standby dead thing doesn't happen when there is a music app that's playing some song while in standby. Even if the phone is on silent and media volume is 0. So the temporary fix is to keep playing some song and keep media volume at 0. I would be really happy if someone comes up with a permanent solution though. Thanks. Any help would be greatly appreciated

Was the problem present on the stock ROM?

elmkzgirxp said:
Was the problem present on the stock ROM?
Click to expand...
Click to collapse
I have the same problem with CM based roms, went back to stock and it doesn't have this issue, could it be something to do with ambient display/doze?

kurtbvb said:
I have the same problem with CM based roms, went back to stock and it doesn't have this issue, could it be something to do with ambient display/doze?
Click to expand...
Click to collapse
No, I don't think so. Which version did you come from? I would suggest flashing 15.4.A.1.9 first because most custom ROMs use it as base and doesn't offer full compatibility with older versions.

elmkzgirxp said:
Was the problem present on the stock ROM?
Click to expand...
Click to collapse
Nope. My sister had been using this phone on 4.3 since 1yr now. I decided to use it as a secondary media device when she got a new phone. When I first unlocked my bootloader after rooting the device went into bootloop. So had to restore it to stock 4.1 Indian (couldnt find 4.3 indian ftf) using flashtool (took 2 days and tons of researching to get the drivers working). Then I rooted it again and flashed twrp and cm 12.1. Have been facing this problem ever since.
It's driving me crazy now. Might go back to stock if it doesn't get fixed
Edit - also just checked the sim slot isn't working either. Tried multiple 12.1roms but it won't get detected. Didn't realise this before as I'm using this as a media device and don't need sim card working anyway.

RagzyB said:
Nope. My sister had been using this phone on 4.3 since 1yr now. I decided to use it as a secondary media device when she got a new phone. When I first unlocked my bootloader after rooting the device went into bootloop. So had to restore it to stock 4.1 Indian (couldnt find 4.3 indian ftf) using flashtool (took 2 days and tons of researching to get the drivers working). Then I rooted it again and flashed twrp and cm 12.1. Have been facing this problem ever since.
It's driving me crazy now. Might go back to stock if it doesn't get fixed
Edit - also just checked the sim slot isn't working either. Tried multiple 12.1roms but it won't get detected. Didn't realise this before as I'm using this as a media device and don't need sim card working anyway.
Click to expand...
Click to collapse
Do what I said to @kurtbvb too, as it may just be base incompatibility. Flash everything except the TA partition (if present) and wipe /data and /cache.

elmkzgirxp said:
Do what I said to @kurtbvb too, as it may just be base incompatibility. Flash everything except the TA partition (if present) and wipe /data and /cache.
Click to expand...
Click to collapse
So do I flash stock 4.3 using twrp or do I need to flash the ftf file using flashtool ?

RagzyB said:
So do I flash stock 4.3 using twrp or do I need to flash the ftf file using flashtool ?
Click to expand...
Click to collapse
Flashtool. Some files are required which custom recoveries can't flash.

Just flashed the above mentioned ftf file and then rooted the phone, installed twrp and then cm 12.1 based rom. Everything runs perfect now. No random shut downs and Sim card works as well.
Thanks you so so much