Related
I tried to upgrade my rom but the process crashed. The utility mtty doesn't work because when I connect the universal, boatloader mode by the cable, to the pc, it says "USB not recognized" (sometimes when I connect the computer is frozen till I disconnect the cable of the universal)
Please, I tried to have some solutions in the forum but all the posts indicates is needed previously the usb connection.
Do you know if should be possible to run the flash of the rom in other way, for example using a serial cable connected into the miniusb of the universal, because the boatloader screen says "Serie, v.1.01"
I apprecite what you can say please, I'm really in a hole.
Try this...
Try taking out the battery for a few minutes (10-30mins) and reboot your PC then repeat upgrade process. Hope that helps. Good luck!!!
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
The only thing I found that worked was to try a different PC, then it was fine...
sl9 said:
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
The only thing I found that worked was to try a different PC, then it was fine...
Click to expand...
Click to collapse
In my case it still happening in other computers. Conclussion: some piece of the software in the universal has been lost. The screen shows "Serial" that means on some way that is opened to comunication but not USB.
My questions are:
- should be possible to put some starting software in SD and do the universal boot on it.
- do you know how to connect to the computer COM! port from the usb miniport of the Universal.
I appreciate, I was not planning to replace now the Universal...
beginner said:
sl9 said:
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
Now works.... I still thinking windows is so stupid software made for distroy our mind ....
Solved after install drivers for a converter usb -rs232 ( I was looking for the way to connect from rs232 the universal)
I'm happy again and I promise don't try to change rom again (at least for a while)
If some person is interested in what brand of software/hardware I installed, send me a mail...
Thanks hearing me ...
Click to expand...
Click to collapse
Click to expand...
Click to collapse
i have the same problem with my friend's uni
does it mean that you don't have to own any adapter, just have to install drivers for USB to RS232 adapter
if yes, where to find it?
thanx
respectfully
ZeD
zedino said:
i have the same problem with my friend's uni
does it mean that you don't have to own any adapter, just have to install drivers for USB to RS232 adapter
if yes, where to find it?
thanx
respectfully
ZeD
Click to expand...
Click to collapse
I want to say that is running after doing some things and obviously some of it solved my problems. I made:
- unistall last version of activesync and go back to version 4.0
- delete all the applications using ports usb.
due the connection still not running (windows message: device not recognized) and because in the screen of universal I saw: "COMM1" I tried to connect from computer port rs232. By that I purchased some special cable, name: hama brand, rs232 serial, 9 pin - usb.
As you can imagine all the steps I followed were followed by the typical restart of windows. In this sense is important to say that the universal, after connect, need to do a soft reset each time (again windows....)
Other comment is that I unmark the option to connect by usb in activesync and mark the connection by com1.
and after all was done, connecting by usb the unniversal, kill wcescomm, windows said "NEw usb device, sync device". I started mtty and now appears the USB option, great! same time the screen in universal changed from comm1 to usb, more great....
and that's all.
does it mean you solve your problem using special USB 2 RS232 connector?
ZeD
PS: it was my first idea , but i still believe i can solve the problem using USB port
zedino said:
does it mean you solve your problem using special USB 2 RS232 connector?
ZeD
PS: it was my first idea , but i still believe i can solve the problem using USB port
Click to expand...
Click to collapse
I think my english wording was not fine. I mean I solved my problem after install the sofware -drivers- of the rs232 connector, but connecting to the universal by usb as on standard way I was syncronizing previous the crack with activesync.
OK, where to get this driver?
thanx
?????????? NOTHING ?????????????
zedino said:
OK, where to get this driver?
thanx
Click to expand...
Click to collapse
Try here.
http://www.hama.de/portal/type*3/action*1026/searchMode*1/q*039703
I have had the same problem several times now (search the forum for the thread).
I tried three different PC's/laptops and three different USB cables all with the same error as yourself.
Eventually I got a connection but the laborious process of trying - failing, restarting windows and soft resetting the phone, trying - failing........... until it finally worked. I did nothing differently the time that it worked but the strange thing is that it has worked every time since! Maybe the USB driver the phone has a bug in it that causes it to get 'stuck' in a mode where it will no longer correctly operate but once you have managed to 'kick' it into action it seems toi then carry on working.
It was also a ROM upgrade that caused my USB phone driver to stop functioning. Maybe the fact that the phone has a slightly diffferent software configuration after the upgrade but exactly the same hardware fingerprint causes the driver to fail.
Every time that I have had this problem it is after an upgrade but once I have gotten it to work once with the new ROM, it always continues to function - until the next upgrade.
shrubbery said:
I have had the same problem several times now (search the forum for the thread).
I tried three different PC's/laptops and three different USB cables all with the same error as yourself.
Eventually I got a connection but the laborious process of trying - failing, restarting windows and soft resetting the phone, trying - failing........... until it finally worked. I did nothing differently the time that it worked but the strange thing is that it has worked every time since! Maybe the USB driver the phone has a bug in it that causes it to get 'stuck' in a mode where it will no longer correctly operate but once you have managed to 'kick' it into action it seems toi then carry on working.
It was also a ROM upgrade that caused my USB phone driver to stop functioning. Maybe the fact that the phone has a slightly diffferent software configuration after the upgrade but exactly the same hardware fingerprint causes the driver to fail.
Every time that I have had this problem it is after an upgrade but once I have gotten it to work once with the new ROM, it always continues to function - until the next upgrade.
Click to expand...
Click to collapse
not works, probably is this device lost forever, i have restarted device and PC almost hundred times, still the same result, uni stuck in Bootloader screen top of page "Serial" bottom of page "v1.00"
nothing changed, even if i connect to USB port
if someone have some solution to this s*it pls let me know
thanx
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
mrijnvis said:
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
Click to expand...
Click to collapse
no, my problem persist, hundred times i tried to recover friends device using upgrade by original shipped ROM but the device is not recognized by system so there is allways connection error, so this kind of reliving this UNI is not usable
anyway, thanx for raply and suggestion
ZeD
mrijnvis said:
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
Click to expand...
Click to collapse
If you're stuck in bootloader mode only, visit www.buzzdev.netand look for ExitBootloader utility written by the great Buzz. Just follow his instructions or scroll thru' Universal's forum here and there for problems relating to "stuck in bootloader"
hope this helps
no device is not recognized by PC so any trying to use exitbl is not available, anyway this option was one of the first what i have tried
thanx anyway
ZeD
i had the same problem with the QTEK of my principal after I upgraded his ROMs.
(after the hard reset, the pocket remained in bootloader mode).
you can solve this problem in a very simple way:
you have to launch the bootloader installation (BL1.01_RUU_UNI_V.1.2.EXE) from the PC (still connected with the PPC through USB) while the PPC is in bootloader mode (on your display you see "USB > Serial 1.01" or something like that).
then you do a SOFT reset and the pocket boot normally.
very simple.
i hope to be helpful to someone.
zedino said:
no device is not recognized by PC so any trying to use exitbl is not available, anyway this option was one of the first what i have tried
thanx anyway
ZeD
Click to expand...
Click to collapse
I had some problem. After uninstall all usb applications in the pc and install the software for cable usb -rs 232, doing some softreset in the pda connected, it turned the screen message "Com" by "Usb"
Hello, XDA-Experts!
I encounter a problem with my desire HD and looking for any help I can get.
Since about one week my Phone is not recognized when connected to a PC.
I am using the phone since December 2010 and it works well since then. It's S-Off and Radio S-Off. In the moment, I am using CoreDroid 4.9 with Radio 26.06.04.06_M. Before I was using the ARHD ROM for some time.
The problem occurs on 3 different PC's with 3 different operating systems (Server 2003, Win 7 Ultimate 64-Bit, Win XP Pro SP3, all of them used to recognize the phone before). Windows never recognizes the phone now, android (in most cases) recognizes the connection an asks for the connection mode. The phone is ALWAYS charging over USB.
What I tried so far, after searching in different forums and via Google:
- Rebooting the phone
- Removing the phone's battery
- Booted in fastboot - no USB connection
- Tried a different USB cable
- Changed the USB ports at pc (without hub, no other USB-devices connected)
- Flashing other ROM (tried CM and MIUI, with full wipe/factory reset)
- Checked the USB-connector in the phone with an electronic microscope - all contacts look fine
I am running out of ideas, the only thing I couldn't try, is another radio, because I don't know how to flash without pc. But I don't think, the problem is related to the radio...
Any help is greatly appreciated.
Bladeinger said:
Hello, XDA-Experts!
I encounter a problem with my desire HD and looking for any help I can get.
Since about one week my Phone is not recognized when connected to a PC.
I am using the phone since December 2010 and it works well since then. It's S-Off and Radio S-Off. In the moment, I am using CoreDroid 4.9 with Radio 26.06.04.06_M. Before I was using the ARHD ROM for some time.
The problem occurs on 3 different PC's with 3 different operating systems (Server 2003, Win 7 Ultimate 64-Bit, Win XP Pro SP3, all of them used to recognize the phone before). Windows never recognizes the phone now, android (in most cases) recognizes the connection an asks for the connection mode. The phone is ALWAYS charging over USB.
What I tried so far, after searching in different forums and via Google:
- Rebooting the phone
- Removing the phone's battery
- Booted in fastboot - no USB connection
- Tried a different USB cable
- Changed the USB ports at pc (without hub, no other USB-devices connected)
- Flashing other ROM (tried CM and MIUI, with full wipe/factory reset)
- Checked the USB-connector in the phone with an electronic microscope - all contacts look fine
I am running out of ideas, the only thing I couldn't try, is another radio, because I don't know how to flash without pc. But I don't think, the problem is related to the radio...
Any help is greatly appreciated.
Click to expand...
Click to collapse
Your device manager shows anything when you connect it to your pc?Debugging mode is enabled?
Device Manager shows nothing. Debugging Mode is enabled.
I went through a similar problem a while back - took ages to resolve it - in my case the problem was the usb cables I was using - I had tried a few - but its possible to get cables that only charge and dont communicate - eventually i got it fixed by using a new original cable.
Might not be this for you but it certainly helped me
No fix that I know of...
I had this problem...
I tried different computers, different SD cards, I could take the sd card out and put it in a usb holder and that would work fine, so it really wasn't the sd card. I tried different usb cables too.... nothing would work.
I spoke to my carrier (Orange) to see if they could sort out the problem, and they went through their 'script' of diagnostics and came to the conclusion that it was my computer drivers and there was nothing wrong with the phone!!!
I then rang HTC and after several phones calls later, they said that they would repair it, unfortunately that would have left me without a phone for 2 weeks, so I rang Orange again to demand that they replaced the phone! I told them that HTC had said it was a fault and they sent out a replacement Luckily I had not rooted it at this point, so it was easy for me to swap it.
The replacement phone came the next day, and like magic, worked fine when I connected it to my computer (the same one that apparently had faulty drivers!!)
So, I never found a fix for this, but managed to get a replacement! hopefully you will be able to sort something out...
Good luck
I had this problem once and it turned out to be kernel related, but I'm not sure if this would apply in your case since you've flashed a few ROMs and still have the issue. Still, might be worth trying one of Apache's Buzz kernels or LeeDrOiD's latest... if only to rule out another possibility.
does your PC recognize it if you mount the SD in recovery?
if not, it should be the cable
I had the same thing, I went crazy, and somebody told me to use another cable
and worked
Same happened to me.
Seems the phone crashed the USB controller or something on the PC.
A reboot of the PC fixed it for me (I dont see you mention that anywhere).
First of all, thanks a lot for all your replies!
As I said before, I tried 2 different cables, that both worked fine before. But after your replies I tried a third, new one - same result.
The card is recognized fine by windows when I put it in a USB-Card Adapter.
What I forgot to mention in my initial post, is, that I also formatted the card in my pc, put it back in the phone and started the phone new - same result.
I will try some other kernels now. B.t.w., has anyone a solution for flashing the radio without pc? Via terminal, or recovery? As this is one of the few things, that I couldn't try yet.
I'm 99% sure radio wont be a factor in this mate as they only deal with mobile connections, eg GSM/3G, Bluetooth, WiFi and GPS. If the problem is software and not hardware then I think it will be with the Android USB gadget driver, which is in the kernel. Someone please correct me if I am wrong.
Can you mount as usb in CWM?
No, that doesn't work either.
Sent from my Desire HD using XDA Premium App
1) Try reinstall HTC driver on your windows and try again.
2) If it failed, backup all your files on sd card via USB-Card Adapter. Then use SD Formatter 3.0 (google it) to format the sd card. Copy the backup files back to SD card and try mount the usb again.
HELP i got the same problem
I use the phone in the last 6 months; I have S-OFF, clockworks custom recovery and rooted stock HTC 2.2 Froyo. The only change I made last week is purchasing a desktop cradle "stand". I tested the stand several times the last week and I was able to access the SD card & the HTC sync modes successfully.
Now when I connect the phone using stand or any other USB cable including the original HTC; nothing happened on the computer! The USB manager activates and brings up the USB connection type menu. However, nothing recognized by PC.
I tried all things that you can expect (another PC, another cable, factory reset, new room, with/without cradle) nothing happened, even I connected the phone on a new PC it didn’t detect the new driver!
What to do now??
Hi,
Not sure if you have already, but you can try the new HTC sync version 3.0.5557 - It's actually for the HTC flyer tablet, but i installed it and it works perfectly for the DHD.
You might have a driver issue, but the new 3.0 sync comes with new windows drivers so maybe it's worth a shot.
I've checked the HTC Flyer support page but there's no link there for the 3.0 Synch ... I could only find a direct link, here below
http://www.htc.com/www/SupportViewNews.aspx?dl_id=1097&news_id=923
Be sure to un-install the previous HTC sync first
Its not a driver issue, I tried the new sync. Not working. Nothing is working with USB only the charger.
I have a feeling that electrostatic damaged my USB. I remembered last week I touch the phone while charging and a one electrostatic click was strong.
help!!
Bladeinger said:
Hello, XDA-Experts!
I encounter a problem with my desire HD and looking for any help I can get.
Since about one week my Phone is not recognized when connected to a PC.
I am using the phone since December 2010 and it works well since then. It's S-Off and Radio S-Off. In the moment, I am using CoreDroid 4.9 with Radio 26.06.04.06_M. Before I was using the ARHD ROM for some time.
The problem occurs on 3 different PC's with 3 different operating systems (Server 2003, Win 7 Ultimate 64-Bit, Win XP Pro SP3, all of them used to recognize the phone before). Windows never recognizes the phone now, android (in most cases) recognizes the connection an asks for the connection mode. The phone is ALWAYS charging over USB.
What I tried so far, after searching in different forums and via Google:
- Rebooting the phone
- Removing the phone's battery
- Booted in fastboot - no USB connection
- Tried a different USB cable
- Changed the USB ports at pc (without hub, no other USB-devices connected)
- Flashing other ROM (tried CM and MIUI, with full wipe/factory reset)
- Checked the USB-connector in the phone with an electronic microscope - all contacts look fine
I am running out of ideas, the only thing I couldn't try, is another radio, because I don't know how to flash without pc. But I don't think, the problem is related to the radio...
Any help is greatly appreciated.
Click to expand...
Click to collapse
hey I have same problem... :-/
what's the solution ?? plz tell me
same problem
please help
I was trying to transfer some files to my phone through a USB cable today, but the phone was not recognized by the PC at all (Even though it was working a week or so ago). I had some issues before with the cable needing to be still in a certain position or it would disconnect from the PC, so I tried using another USB cable which didn't work either (I tested both USB cables with another device, and both cables were working and the other device was recognized by the PC).
I also updated the USB drivers on my PC with the official drivers on the ASUS support page, and tried putting my phone in fastboot and recovery mode, but both were still not being recognized by my computer. My phone still charges properly, but I am wondering if the USB port got damaged somehow so that it can't connect to a PC anymore?
pyroshroom said:
I was trying to transfer some files to my phone through a USB cable today, but the phone was not recognized by the PC at all (Even though it was working a week or so ago). I had some issues before with the cable needing to be still in a certain position or it would disconnect from the PC, so I tried using another USB cable which didn't work either (I tested both USB cables with another device, and both cables were working and the other device was recognized by the PC).
I also updated the USB drivers on my PC with the official drivers on the ASUS support page, and tried putting my phone in fastboot and recovery mode, but both were still not being recognized by my computer. My phone still charges properly, but I am wondering if the USB port got damaged somehow so that it can't connect to a PC anymore?
Click to expand...
Click to collapse
uninstall and reinstall the drivers. Ensure that phone is not connected during the process.
also have you upgraded your pc os ? if yes then its a little cumbersome to get the same working...
i changed from stock to cm, it is showing well now ... using RR now
Is your phone encrypted? If so you need to unlock in order for your pc to recognize it.
Thank you both of you for the help, unfortunately, my phone was not encrypted so there was no need to unlock in order for it to be detected. Uninstalling and reinstalling the drivers didn't work, and my PC was already on windows 10 since a few months ago. I would also prefer sticking to the stock ROM for this phone for now since they keep coming out with updates.
In addition, I tried using a USB OTG cable to see if the phone could detect the USB drive and my phone couldn't (it has worked before, and my old Galaxy Nexus could still detect it). I also tried plugging my dualshock 3 into the phone, and it also couldn't be detected (also had worked before).
It looks like it's actually a hardware issue and my only option is to RMA it now. I'll have to do it at a time when I don't need my phone as much or when I am not as busy.
PS: In case anyone else has this issue in the future, quick charging also no longer works
zenfone2 I also experienced that, and I have tried several ways, but remains unchanged. I was dizzy today :crying:
My first Poco F3 is completely unlocked and running a custom rom, still able to connect to PC even now.
I have a second Poco F3 that I was able to originally connect to my PC to debloat, hadn't needed to connect it to a PC till now. Today was the day I could unlock it but when I connect it via USB cable, original or otherwise, no usb options appear on phone and nothing shows on PC. I can use the same cable on my first Poco F3 and everything works fine. I've tried multiple cables, reinstalling drivers, restarting phone and PC, trying a different PC, enabling debugging tools, etc.
Nothing shows in "My Computer"
Nothing shows in Device Manager
No usb options on phone (default is set to File Transfer)
Nothing shows in CMD with "adb devices"
Charging still works
Is there anything I can do to at the very least unlock the bootloader? Or is this not fixable?
long shot... check the usb C port for dirt/dust/fluff blocking connection...
Most probably u debloated an app responsable for media transfer. If u can, revert what u debloated.
Alin45 said:
Most probably u debloated an app responsable for media transfer. If u can, revert what u debloated.
Click to expand...
Click to collapse
Did a factory reset thinking that may have been the case, still no good.
Tried cleaning out the port and still no good either
I still think it's Windows. Please can you try putting Ubuntu (or another Linux distro) on a USB, booting from that, installing platform tools (ADB/fastboot etc) and then running ADB devices. Windows is very finiky sometimes.
Edit: when you plug in your phone to the PC do you get a notification saying charging? Or is there no notification? Also does it start charging the phone?
There is a delay before it begins charging and the charging animation plays but yes it does. But then there is no usb notification. Will try ubuntu and report back
Booting into Ubuntu, before installing platform tools the first phone that I knew worked showed up and showed up in adb devices when platform tools was used. The second still didn't show up, exactly the same as on windows
Try downloading the installed stock miui rom from the update menu in the miui update menu and re-install it on the phone
Unfortunately reinstalling latest package didn't help
Can't think of anything else to suggest. Sorry
If the usb connection continues to be nonexistent, is there any way to at least unlock the bootloader without using the Xiaomi Unlock tool on the PC?
Are you sure the USB cable you're using support transfert file?
Cjayy said:
If the usb connection continues to be nonexistent, is there any way to at least unlock the bootloader without using the Xiaomi Unlock tool on the PC?
Click to expand...
Click to collapse
Nope
Hmmmmm.....strange! I'm running out of ideas....try different USB ports on PC. Maybe it's a faulty USB-C port on phone after all.
do you have a type c usb-otg?
If yes then see if it is detected by the phone
X0PIRAT3 said:
Are you sure the USB cable you're using support transfert file?
Click to expand...
Click to collapse
Yes. Used 4 different cables, 1 of which is the cable that comes with the phone. None work on this phone but do on the first phone.
Alin45 said:
Hmmmmm.....strange! I'm running out of ideas....try different USB ports on PC. Maybe it's a faulty USB-C port on phone after all.
Click to expand...
Click to collapse
Tried different ports across 2 PCs. I'm starting to think it is a faulty port, though it worked fine a week ago.
arifqur said:
do you have a type c usb-otg?
If yes then see if it is detected by the phone
Click to expand...
Click to collapse
I honestly don't know if any of my cables are usb-otg, how would I check?
Try to use this version of Mi FLash Tool (only for drivers) : https://xiaomiflashtool.com/download/xiaomi-flash-tool-20210226
Extract and launch the executable then drivers install
Something like this. You can plug in any usb stick and see if it is detected. Another way to check whether the port on the phone is working for data as well
X0PIRAT3 said:
Try to use this version of Mi FLash Tool (only for drivers) : https://xiaomiflashtool.com/download/xiaomi-flash-tool-20210226
Extract and launch the executable then drivers install
Click to expand...
Click to collapse
Tried this and still no good.
arifqur said:
Something like this. You can plug in any usb stick and see if it is detected. Another way to check whether the port on the phone is working for data as well
Click to expand...
Click to collapse
I don't have anything like this but that reminded me of the usb-c to headphone adapter and that also doesn't work. Sound just plays out of the speakers.
Trying with Android Auto in the car, the car doesn't register a device connecting at all either.
Either the data transfer portion is somehow disabled on the device itself (which I would love to know how to enable it again if that's the case) or it's a damaged usb port. Just strange that it worked a week ago.
Something I forgot to mention, when I went to unlock the bootloader yesterday the phone did not show up anywhere except for in the ADBFastbootTools to debloat the software as a OnePlus device but then never showed up again.
Cjayy said:
Tried this and still no good.
I don't have anything like this but that reminded me of the usb-c to headphone adapter and that also doesn't work. Sound just plays out of the speakers.
Trying with Android Auto in the car, the car doesn't register a device connecting at all either.
Either the data transfer portion is somehow disabled on the device itself (which I would love to know how to enable it again if that's the case) or it's a damaged usb port. Just strange that it worked a week ago.
Something I forgot to mention, when I went to unlock the bootloader yesterday the phone did not show up anywhere except for in the ADBFastbootTools to debloat the software as a OnePlus device but then never showed up again.
Click to expand...
Click to collapse
I have the same problem, did you solve it ? I replaced the usb board of the phone, still not working.
To provide you with some context, I messed up a custom ROM install on my Redmi Note 5 Pro/Whyred Global version/ where the phone starts up and get stuck on the Orangefox Recover logo screen.
I thought I could just reinstall Orangefox via fastboot and format the phone to start fresh but the phone is refusing to be recognized by Windows in fastboot. It's the same Windows 10 PC that I used to unlock the bootloader on this phone and flash a custom recovery a year ago, and now it refuses to recognize my phone altogether.
Its giving me the USB Device Descriptor Request Failed error.
The drivers are not the issue here on my PC, I recently used this PC to unlock my Poco F3 and the procedure on that went flawlessly. But now it's refusing to recognize this phone. To rule out the little stuff, i changed cables, changed and tried different PCs, decided to use a USB 2.0 port on my PC thinking that might be the problem but still no luck.
I was planning to try this guide, but for that, I would need the hardware ids for the phone when its in fastboot mode. So if anyone has the phone, please I beg you give me the hardware Ids. I really want to fix this phone and give it another life.
Just in cast this fails, my last option would be to get the micro USB port replaced. I have gotten the USB port on this phone replaced twice as it used to cause problem when charging, so my final doubts are going to this.
My only evidence against a borked USB port is that the phone used to fast charge fine with this port. And since fast charging utilizes the data cables to negotiate with the fast charger, but I might be wrong about this.
So if anyone can help me regarding this issue, I would highly appreciate it.
https://forum.xda-developers.com/t/fastboot-not-detecting-my-phone.4544585/post-88035749
aIecxs said:
https://forum.xda-developers.com/t/fastboot-not-detecting-my-phone.4544585/post-88035749
Click to expand...
Click to collapse
I tried that , but I am still getting that error. Do you think this might because of faulty USB port?
probably Windows issue. use linux
https://gist.github.com/smac89/251368c8df2ccd645baedc3e1238fdb4
abeel_siddiqui said:
Its giving me the USB Device Descriptor Request Failed error.
Click to expand...
Click to collapse
That's an indication of basic USB enumeration failing.
It could be bad cable, bad port or your device has failed initializing USB.
It's not an indication of anything to do with Windows drivers (at this point).
Renate said:
That's an indication of basic USB enumeration failing.
It could be bad cable, bad port or your device has failed initializing USB.
It's not an indication of anything to do with Windows drivers (at this point).
Click to expand...
Click to collapse
I have also tried swapping cables, the micro USB fault might just be faulty on the phone.
aIecxs said:
probably Windows issue. use linux
https://gist.github.com/smac89/251368c8df2ccd645baedc3e1238fdb4
Click to expand...
Click to collapse
That could be possible, I will try booting into a live Linux environment and try it there.