Related
Where can i get a htc desire z/g2 motherboard??
i dropped my phone and something inside of it something got loose, now it wont charge or turn on
Just took it to a repair guy, he opened it up and said everything seems fine....no corrosion or anything from water...but the phone wont power on....any one here have any ideas? just shoot em, im willing to take anything
Ask HTC?
MacaronyMax said:
Ask HTC?
Click to expand...
Click to collapse
i tried, they wont cover accidental damage. And my warrantys been voided since someone opened it up..
I bought a second hand phone and it did turn on however there were a numbers of problems with my phone, it had a power button that didnt work, unresponsive parts on the lcd and a quiet in call speaker.
Your best bet before trying to replace the whole pcb is opening your phone using a teardown guide
http://tjworld.net/blog/htc-desire-z-tear-down
Make sure you read it a couple of times and go through the pics so you know what your dealing with, find the power button, make sure its intact and adjust the ribbon cables.
Otherwise just find a cell phone repairer on a classified ad like criagslist or kijiji.
TheToiletSpaula said:
I bought a second hand phone and it did turn on however there were a numbers of problems with my phone, it had a power button that didnt work, unresponsive parts on the lcd and a quiet in call speaker.
Your best bet before trying to replace the whole pcb is opening your phone using a teardown guide
http://tjworld.net/blog/htc-desire-z-tear-down
Make sure you read it a couple of times and go through the pics so you know what your dealing with, find the power button, make sure its intact and adjust the ribbon cables.
Otherwise just find a cell phone repairer on a classified ad like criagslist or kijiji.
Click to expand...
Click to collapse
i had someone take apart the phone and they said everything inside looked good. Im going to take it to another place tommorow and see if they can fix it....otherwise this is the 2nd smartphone that died on me. HTC told me to go to Bell...and i bought this phone 2nd hand. Trying to send my Galaxy S in was a Pain....anyone here know of good 3rd party repair services in Ontario?
jark99 said:
i had someone take apart the phone and they said everything inside looked good. Im going to take it to another place tommorow and see if they can fix it....otherwise this is the 2nd smartphone that died on me. HTC told me to go to Bell...and i bought this phone 2nd hand. Trying to send my Galaxy S in was a Pain....anyone here know of good 3rd party repair services in Ontario?
Click to expand...
Click to collapse
I hate to say it, but it was second hand for a reason. Ever try switching the battery? How about changing the power supply?
melodicjunkie said:
I hate to say it, but it was second hand for a reason. Ever try switching the battery? How about changing the power supply?
Click to expand...
Click to collapse
Yes. Start simple. First check your electron hose to make sure you are getting power to the device. Also check the battery as well as the prongs that connect with the battery tabs. If things are good there, then think about tearing into the phone.
melodicjunkie said:
I hate to say it, but it was second hand for a reason. Ever try switching the battery? How about changing the power supply?
Click to expand...
Click to collapse
no no, dont say that. This phone was fine for 3 months, i dropped it at a club i went to and water got inside the phone....i took it to 3 repair people and they all said the Main PCB motherboard is damanged (water) soo does anyone have any idea where i can find a motherboard?? i have no problem with costs of replacing it. As long as its not more than the phone itself.
jark99 said:
no no, dont say that. This phone was fine for 3 months, i dropped it at a club i went to and water got inside the phone....i took it to 3 repair people and they all said the Main PCB motherboard is damanged (water) soo does anyone have any idea where i can find a motherboard?? i have no problem with costs of replacing it. As long as its not more than the phone itself.
Click to expand...
Click to collapse
You didn't mention water damage in the OP. You said something was loose. Water damage is completly different.
Try ebay.
Hey i found these 3 ads on ebay...do you guys think that a swap of the motherboards would be fine? heres the ads. I contacted the seller and they said the battery was used and thats it but phone seemes operational....i know its a risk, but is it worth it guys?
..need help on this one.
why swap the motherboards if the new phone is working fine. Just transfer data and you're done surely?
elliott2705 said:
why swap the motherboards if the new phone is working fine. Just transfer data and you're done surely?
Click to expand...
Click to collapse
Reason being the other phones have minor problems, like speaker doesnt work, or some of those phones wont pick up signals and i think thats due to a bad radio flash or if i just flash a radio everything should be working fine.
can someone please clarify this? if i buy a phone with a speaker problem and transfer the main PCB board to my old phone...will there still be a speaker problem? or is the speaker a separate unit itself and not related to the pcb board?
jark99 said:
can someone please clarify this? if i buy a phone with a speaker problem and transfer the main PCB board to my old phone...will there still be a speaker problem? or is the speaker a separate unit itself and not related to the pcb board?
Click to expand...
Click to collapse
If am correct the speaker is a separate component
Sent from my HTC Vision using XDA Premium App
lainvalenajr said:
If am correct the speaker is a separate component
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
one of the phones i am bidding for says it might not be able to guarantee a connection to mobile network (send sms,make calls) could that be a radio flash problem? would i be able to fix that??
another is one of the phones boots on and shuts off, i take it that could be a bad flash or something? its only about $20. just trying to weigh my options cause the new phones are lkike bidding for $350 lol im not that rich yet
I found out that my MOTHERBOARD is fine. There was water damage but not enough to go inside to the main board! My dad tested the battery voltage and found i wasnt getting any voltage.
i went to future shop and found a lady to let me use her battery and sure enough the battery was working and phone powered on!!! so i guess my battery was shot from dropping and popping out of phone while recording a video.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330551036273
ordered these from ebay....are they any good? they look decent
Those look like the batteries I got. They were about 1/2 of the claimed mah rating. Worst case, they wiill get you running, and that charger is pretty good.
Sent from my T-Mobile G2 using Tapatalk
That is why you bring a secondary phone to the club. Just sayin'.
BB Bold for the club, G2 for work and school, Iphone 4 for at home / chilling with friends.
convolution said:
BB Bold for the club, G2 for work and school, Iphone 4 for at home / chilling with friends.
Click to expand...
Click to collapse
So, made of money you are? Support your favorite ROM developer you should.
Sent from my HTC Vision using Tapatalk
Having some issues with my ET4G here, not really sure how it happened. My phone went into random bootloops earlier today after pulling it off the charger in the morning. I finally was able to get it booted up but the notification light continued to stay red and it basically thinks there is a USB cable connected to it. When plugged into a pc or charger it does not charge or mount into odin. I've got the thing booted into odin mode now and plugged in, but odin just isn't seeing it. Both sprint and sammy both said they have NEVER heard of this issue, I don't know if I believe it. I have a replacement on the way (when I brought it to the sprint store the tech cracked the screen putting it back together so they are replacing it for me) but I'd like to get it atleast half working for the weekend. Any help would be appreciated!
Edit: I forgot to mention that when I put a battery in the phone, it automatically boots up. Sometimes it is successful, but sometimes it just loops at the screen you get when you charge your phone while powered off (note the phone is unlpugged!!!) Pretty weird symptom, but I know the phone doesn't normally boot itself up when a battery is put in it.
i see this alot with the samsung replenish...my theory is youve been using an off brand charger and its made the pin inside the charging port crank up at an angle, making the device think its always plugged in
i fix the replenish's easy enough by taking some tweezers and bending the little pin inside the port back down, works everytime
im a tech at an indirect store fwiw
kurtiskobain said:
i see this alot with the samsung replenish...my theory is youve been using an off brand charger and its made the pin inside the charging port crank up at an angle, making the device think its always plugged in
i fix the replenish's easy enough by taking some tweezers and bending the little pin inside the port back down, works everytime
im a tech at an indirect store fwiw
Click to expand...
Click to collapse
This sounds highly possible. Also try pulling your sd card to see if that makes any difference.
Looking inside the charger port it doesn't look like anything is out of sorts. A little corrosion from humid weather and working outdoors but never any water damage. I'm looking at the inside of my phones port right now and all the gold strips are at the same level, and the cable seems to click in just fine. Am I missing something? And yeah for the record I have like 4 different USB cables I use and they are all different brands. Let me know if I should be looking for something else, or if you guys have any other input. I was able to get it to mount before I left for the sprint store, pushed a stock setup and older modem so they wouldn't question anything, but now it's just completely not connecting. Also, when I was able to mount it earlier, it would not charge but was atleast recognized by odin. When the sprint tech had my phone apart I saw the charger port myself it didn't look to have any physical damage to it...such a weird issue!
DataHawg said:
This sounds highly possible. Also try pulling your sd card to see if that makes any difference.
Click to expand...
Click to collapse
Yeah pulled the SD card as well. Tried most of the typical stuff but please mention anything "obvious" sounding anyway cause at this point I'd be willing to try double backflips to get the thing working.
kurtiskobain said:
i see this alot with the samsung replenish...my theory is youve been using an off brand charger and its made the pin inside the charging port crank up at an angle, making the device think its always plugged in
i fix the replenish's easy enough by taking some tweezers and bending the little pin inside the port back down, works everytime
im a tech at an indirect store fwiw
Click to expand...
Click to collapse
You're referring to the 5 gold strips on the topside of the port on my phone, correct? I mean that's what I assumed but if I'm wrong or there are pins I'm unaware of let me know.
if everything is a go, you might consider trying a hard reset
---------- Post added at 07:17 PM ---------- Previous post was at 07:16 PM ----------
vadyr56 said:
You're referring to the 5 gold strips on the topside of the port on my phone, correct? I mean that's what I assumed but if I'm wrong or there are pins I'm unaware of let me know.
Click to expand...
Click to collapse
pin is probably the wrong term, but im referring to the thing sticking out in the middle of the port...is it slanted upwards? thats what happens to all these repl
kurtiskobain said:
if everything is a go, you might consider trying a hard reset
---------- Post added at 07:17 PM ---------- Previous post was at 07:16 PM ----------
pin is probably the wrong term, but im referring to the thing sticking out in the middle of the port...is it slanted upwards? thats what happens to all these repl
Click to expand...
Click to collapse
The plastic housing or harness seems to be parallel to the screen, maybe slightly downward. And the little gold strips on top of the housing all seem to be flat.
A hard reset? I've tried wiping this thing a million times if that's what you mean by hard reset. Driving me crazy!
hmm seems youv worn your options down...ill tell you what, if you live in MI, come visit me in clinton township and ill either fix it or replace it, and can have you in and out in 15 minutes...if not, take it to the nearest repair center and theyll take care of you. if they dont, give me their number and ill call them and make them!!
kurtiskobain said:
hmm seems youv worn your options down...ill tell you what, if you live in MI, come visit me in clinton township and ill either fix it or replace it, and can have you in and out in 15 minutes...if not, take it to the nearest repair center and theyll take care of you. if they dont, give me their number and ill call them and make them!!
Click to expand...
Click to collapse
Haha yeah I don't think theres much I can do. I'm pretty sure its software related, when the phone is not in odin mode, it sits there and mounts/unmounts itself on my pc but always as an "unrecognizable device" and I have reinstalled the drivers twice. I have a replacement coming already, just don't feel like going through the weekend without a phone (gosh saying that sounds terrible!) but lets be realistic here, cell phones are almost necessary today, especially being someone who's constantly taking calls from customers!
Hello!
I just finish to "unglued" my digitizer cable on my note 2 ,
Please, just take a look at the picture, maybe can I do something to put it back.
Look like unglued..have you any idea if that flex cable it's glued or soldered ?
Thank you very much.
Wow.. I just did the exact same thing yesterday.. same spot on the cable and everything. I did it when I was replacing the glass.. I've tried taping it back.. and now I've tried gluing it , the touch kinda works but really inconsistent and annoying. I've spent way too much time trying to fix it and think I'm just gonna sell as parts now. What did you end up doing? Any luck getting it reattached? If you were successful please let me know what you did.
tri0xinn said:
Wow.. I just did the exact same thing yesterday.. same spot on the cable and everything. I did it when I was replacing the glass.. I've tried taping it back.. and now I've tried gluing it , the touch kinda works but really inconsistent and annoying. I've spent way too much time trying to fix it and think I'm just gonna sell as parts now. What did you end up doing? Any luck getting it reattached? If you were successful please let me know what you did.
Click to expand...
Click to collapse
For me, was no way to put back this flex cable... and I think its close to impossible to make something good with this display.
I just stored that display ....for don't throw it.
Good luck!
this is a usual ribbon cable. i teared mine replacing the screen... will try to replace it and report back.
maybe it will require light smd oven soldering and that will suck big time. maybe i can just pressure it down somehow. your cases are much better, you still have the original cable and half of it is already soldered making it much easier to solder the rest.
gcbxda said:
this is a usual ribbon cable. i teared mine replacing the screen... will try to replace it and report back.
maybe it will require light smd oven soldering and that will suck big time. maybe i can just pressure it down somehow. your cases are much better, you still have the original cable and half of it is already soldered making it much easier to solder the rest.
Click to expand...
Click to collapse
I have do the exact same thing,
Is this going to work?
cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=140945664484&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en
Thanks
Goathier said:
I have do the exact same thing,
Is this going to work?
cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=140945664484&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en
Thanks
Click to expand...
Click to collapse
probably. i hope you haven't glued the glass already
edit, actually that one probably have that ribon cable already attached. i can only see the plug that clips on the motherboard(?)... not sure that is what you want
Goathier said:
I have do the exact same thing,
Is this going to work?
cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=140945664484&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en
Thanks
Click to expand...
Click to collapse
thats not the same part, the part u listed on ebay is for the stylus. U can easily tell its not the same part as shown in the original post. Check out this youtube video at the 20:50 minute mark, it will show u the exact parts and u can tell. Youtube: https://www.youtube.com/watch?v=bxgZeb5QytM
Unfortunatly the part the original poster pictured is part of the digitizer and is near impossible to fix once ripped. all ive been able to find online is that ribbon cable being sold with the digitizer itself. If anyone else actually finds the part shown in the original post please do post back.
ok so... the store broke my lcd while they were trying to remove the digitizer... and now i am looking at ebay on which lcd+touch assemlby to buy and i have a question. are the sony, acer and sharp lcd versions compatible with all one x mobos? i did some research and found that the sony version is the best (so they say)
and313 said:
ok so... the store broke my lcd while they were trying to remove the digitizer... and now i am looking at ebay on which lcd+touch assemlby to buy and i have a question. are the sony, acer and sharp lcd versions compatible with all one x mobos? i did some research and found that the sony version is the best (so they say)
Click to expand...
Click to collapse
Hi,
The Sony and Sharp are not compatible with each other( I've tried to replace one with the other), I've never come across the Acer LCD in Australia so I'm not sure. If you don't know how to tell the Sharp and Sony apart, the Sharp has Green backing on the flex cable, while the Sony is sort of orange with a few yellowish stripeson the back of the LCD flex cable. Sorry I couldn't find any of my photos which show the difference. I would recommend buying the LCD/digitizer combo and a separate midframe to mount it on, as it comes with new 3M adhesive, but you may also have to add a few TINY drops of instant adhesive, I say tiny as too much will press out under the digitizer and will show up, but I have found that without it the digitizer will lift from the frame eventually due to the tight fit of the frame in the rear shell of the HOX.
Hope you go ok!
---------- Post added at 06:45 PM ---------- Previous post was at 06:41 PM ----------
Sorry, just a bit of additional info, have also come across posts saying the colours of the LCD look washed out with the wrong LCD.
okhughes said:
Hi,
The Sony and Sharp are not compatible with each other( I've tried to replace one with the other), I've never come across the Acer LCD in Australia so I'm not sure. If you don't know how to tell the Sharp and Sony apart, the Sharp has Green backing on the flex cable, while the Sony is sort of orange with a few yellowish stripeson the back of the LCD flex cable. Sorry I couldn't find any of my photos which show the difference. I would recommend buying the LCD/digitizer combo and a separate midframe to mount it on, as it comes with new 3M adhesive, but you may also have to add a few TINY drops of instant adhesive, I say tiny as too much will press out under the digitizer and will show up, but I have found that without it the digitizer will lift from the frame eventually due to the tight fit of the frame in the rear shell of the HOX.
Hope you go ok!
---------- Post added at 06:45 PM ---------- Previous post was at 06:41 PM ----------
Sorry, just a bit of additional info, have also come across posts saying the colours of the LCD look washed out with the wrong LCD.
Click to expand...
Click to collapse
ok tnx for the info... and i was thinking i can just order whatever. i checked the panel_type in the last_kmsg and i found that i have the replacement screen for which nobody knows who makes it. but it is a warm panel so it probably is sony... but i have to rip it apart to be certain
Sent from my One X using Tapatalk
and313 said:
ok tnx for the info... and i was thinking i can just order whatever. i checked the panel_type in the last_kmsg and i found that i have the replacement screen for which nobody knows who makes it. but it is a warm panel so it probably is sony... but i have to rip it apart to be certain
Sent from my One X using Tapatalk
Click to expand...
Click to collapse
That's the only downside - having to pull phone apart to check which one you have. Also another tip, phone need to be on to change LCD's, boot phone up with it apart, then wake up with power button on old screen, then sleep with power button, change screens then wake up again. There are plenty of vids on youtube to help, if new screen doesn't activate, check flex cable is in square and all the way - have had this problem before also.
okhughes said:
That's the only downside - having to pull phone apart to check which one you have. Also another tip, phone need to be on to change LCD's, boot phone up with it apart, then wake up with power button on old screen, then sleep with power button, change screens then wake up again. There are plenty of vids on youtube to help, if new screen doesn't activate, check flex cable is in square and all the way - have had this problem before also.
Click to expand...
Click to collapse
tnx... you answered all i was wondering about really appreciated
edit: ok so i riped it apart again and its a sony. for anyone who is wondering what might happen if the wrong screen is attached to the mobo watch this
https://www.youtube.com/watch?v=DHdtgu4rbxI
and the store said: why you dont just buy the "original" for 40€.... god i hate such people
Sent from my One X using Tapatalk
okhughes said:
That's the only downside - having to pull phone apart to check which one you have. Also another tip, phone need to be on to change LCD's, boot phone up with it apart, then wake up with power button on old screen, then sleep with power button, change screens then wake up again. There are plenty of vids on youtube to help, if new screen doesn't activate, check flex cable is in square and all the way - have had this problem before also.
Click to expand...
Click to collapse
I replaced my screen, but I powered down when removing the screen, and putting the replacement in. Now neither will light up. How do you solve this?
There are no guarantees with this, but try pulling the battery out for a minute or two. then with the original screen in, boot up and let it get to the lock screen wait for the screen to sleep then press power button to wake up then again to sleep. when the screen is sleeping try changing over the screens and then press power button to wake again. this is assuming that the screen displays on startup, but even if it doesn't try this process anyway. if it doesn't work, try doing with the new screen back to the old screen after pulling the battery. I have only ever come across this once, but it wasn't from powering down during a screen change, but pulling the battery seemed to fix it.
okhughes said:
There are no guarantees with this, but try pulling the battery out for a minute or two. then with the original screen in, boot up and let it get to the lock screen wait for the screen to sleep then press power button to wake up then again to sleep. when the screen is sleeping try changing over the screens and then press power button to wake again. this is assuming that the screen displays on startup, but even if it doesn't try this process anyway. if it doesn't work, try doing with the new screen back to the old screen after pulling the battery. I have only ever come across this once, but it wasn't from powering down during a screen change, but pulling the battery seemed to fix it.
Click to expand...
Click to collapse
I tried that, didn't work. I think I know the problem now. after searching on multiple forums, I think it's the 220 coil. A lot of people have had a similar issue, and they say they've solved it by replacing the coil. What I want to know is, how I managed to short the coil in the span of a few minutes, despite having used the same screen as the cracked one.
It is possible to do, although they can go for no reason, I recommend taking it somewhere to get coil replaced, it is a very fiddly job and you need to have a steady hand and the right tools (hot air gun) although my father managed to do one with a standard soldering iron, although it wasn't the best job. you risk damaging other components also if they blow off the mainboard (if you can find them), worst case scenario is the display ic has gone - that one will have to be done by a professional.
what a sh!t phone
we tried to repare it 2 years ago.
but failed.
so i just the pieces to gether wanted to see if i can fix it.
still not lcd just touchscreen (and now im not sure if i even have touchscreen lol maybe i broke that to now not sure
anyway sucks i have a brand new lcd touchscreen with frame we bought back then. and its even the right screen a green flex cable like the original one and still noting so i guess i broke the 220 chip thing how dont know. but not sure if i can replace it sucks it was a good phone
is there any help a easy fix? or do i really need to soldern that chip i cant sell the phone since there is personal data on it contacts and pictures (i guess dont remembrer)
It may still be replaceable, if it's been sitting for 2 headed is the phone taking a charge? It needs to be on to change the screen. If it is charging and booting up, and the screen still won't work when being changed try doing a hard reset by holding the power and volume down button until it restarts - have had advice by someone who repairs phones for a living that this should reset what the phone is looking at for hardware and you should be able to do screen replacement. Failing that chances are it's going to be dead. Not much point in selling it these days as they aren't worth much these days. If the phone won't start the battery may be dead flat. The phone needs some voltage to run its charging firmware, you can try to get it charging by leaving on charge for 10 min or more, even if no charge light, then hold power/vol up/vol down at the same time to recalibrate the charge circuit, it may start to charge after this.
Let me know how it goes, I wouldn't spend too much time on it, unless it's now a project..
okhughes said:
It may still be replaceable, if it's been sitting for 2 headed is the phone taking a charge? It needs to be on to change the screen. If it is charging and booting up, and the screen still won't work when being changed try doing a hard reset by holding the power and volume down button until it restarts - have had advice by someone who repairs phones for a living that this should reset what the phone is looking at for hardware and you should be able to do screen replacement. Failing that chances are it's going to be dead. Not much point in selling it these days as they aren't worth much these days. If the phone won't start the battery may be dead flat. The phone needs some voltage to run its charging firmware, you can try to get it charging by leaving on charge for 10 min or more, even if no charge light, then hold power/vol up/vol down at the same time to recalibrate the charge circuit, it may start to charge after this.
Let me know how it goes, I wouldn't spend too much time on it, unless it's now a project..
Click to expand...
Click to collapse
ow volum down? okay will try that. but i think i killed it lol cause the charging light wont come on anymore lol
it was just a idea that poped up in my head, that maybe i can save it so i friend can use it but i think i will just trow it away lol or something will give it a shot and see. will report back
nvm it's dead it wont even boot lol. i think i burned sometime lol that little cable that onder the battery thats conects the botem part with the other fliped out 2 time and 3time it smeled burned lol nvm
Sounds like it may have shorted, a replacement is fairly cheap , just depends on how serious you are about spending money on it.
I forgot to mention that when calibrating charge circuit with power/vol up/vol down all held down at the same time, they need to be held down for at least 2 minutes.
okhughes said:
Sounds like it may have shorted, a replacement is fairly cheap , just depends on how serious you are about spending money on it.
I forgot to mention that when calibrating charge circuit with power/vol up/vol down all held down at the same time, they need to be held down for at least 2 minutes.
Click to expand...
Click to collapse
nvm i think i fried the cpu or something lol it wont turn on anymore.
i trew it in the bin
Probably the best result, it's probably cheaper to to buy a second hand one and also cause less aggravation when you can't work out why it won't work. You could always sell the replacement screen.
okhughes said:
Probably the best result, it's probably cheaper to to buy a second hand one and also cause less aggravation when you can't work out why it won't work. You could always sell the replacement screen.
Click to expand...
Click to collapse
dont think i will sell it i mean who would buy it? lol but guess i could try for like 20euro or 10 lol.
and have 2 batteries for 10 or 5 euro lol
have 3 backcovers also 2 white and 1 black.
we bought every thing to repaire it but yeah.
could maybe sell some **** but pff dont knopw. (its my oncles old phone will ask him (maybe sell every thing exept de motherboard)
That's what I'd do, try and sell it for parts minus the mainboard. If that doesn't work, put it away somewhere and if you come across a dead one cheap, swap the mainboards out (providing it has the same screen - that's a given). Good luck with whatever you decide to do. :good:
Hey guys, i need a little help with my phone... i don't know what is wrong but screen isn't turn on or... It is better you watch video: ( i can't post links so go to youtube and search by "Tw1Xy", then see "LG G3 display issue") or just delete spaces from the link youtu. be /URff YZlYd10
So question is what is going on? how I can solve it?
Thanks
Tw1Xy said:
Hey guys, i need a little help with my phone... i don't know what is wrong but screen isn't turn on or... It is better you watch video: ( i can't post links so go to youtube and search by "Tw1Xy", then see "LG G3 display issue") or just delete spaces from the link youtu. be /URff YZlYd10
So question is what is going on? how I can solve it?
Thanks
Click to expand...
Click to collapse
maybe corrosion on LCD conector or in the motherboard, or maybe a defective screen controller.
if you are in guarantee time is better to send it to LG Repair Center...if not, you can try dissasemble your phone and verify the connector cables to detect what's wrong, if dont see corrosion or connector deffective, LG Spares sell the whole screen with LCD/touch controller...so you have to buy to make it work again.
copy2050 said:
maybe corrosion on LCD conector or in the motherboard, or maybe a defective screen controller.
if you are in guarantee time is better to send it to LG Repair Center...if not, you can try dissasemble your phone and verify the connector cables to detect what's wrong, if dont see corrosion or connector deffective, LG Spares sell the whole screen with LCD/touch controller...so you have to buy to make it work again.
Click to expand...
Click to collapse
yeah, it on guarantee time, but it better to go directly to LG Repair center or store where I bought the phone (Media markt, Parque Nascente)?
Tw1Xy said:
yeah, it on guarantee time, but it better to go directly to LG Repair center or store where I bought the phone (Media markt, Parque Nascente)?
Click to expand...
Click to collapse
oh! you are Portuguese, and close to me! i'm from Valongo...yeah, it's better to go to Media Markt and expose your problem to the guy in assistence...and it will go for the guarantee...
but before that make sure you do a factory reset on the phone (if you are rooted or something unusual than the guarantee dont cover).
good luck.
copy2050 said:
oh! you are Portuguese, and close to me! i'm from Valongo...yeah, it's better to go to Media Markt and expose your problem to the guy in assistence...and it will go for the guarantee...
but before that make sure you do a factory reset on the phone (if you are rooted or something unusual than the guarantee dont cover).
good luck.
Click to expand...
Click to collapse
Thank you so much