Related
first of all i want to say that i already seen similiar thread like mine but it is all about using tot method but my thread is all about lg up .
First of all it"s not my work,full credit goes to autoprime. On autoprime thread in the first page i dont see the updated dll file,he gives the update few page later. So i think people face problem during downgrade like me, So thats why i am opening this thread but if moderator thinks its not nedded, please delete this thread.
so here are the Steps
download kdz for your phone from here http://lg-firmware-rom.com/
install dll file from attachement
installing lg up and how to connect your phone...follow the instruction from here http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
make sure you install dll file before lg up.
Open LGUP on your computer, click on upgrade and point it towards your LP KDZ. Close LGUP and re-open LGUP and select refubrish.. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. Now you are done and hope it helps people, who are face trouble during downgrade like me also don't forget to hit thanks if it's helpful to you.
OMG I LOVE YOU... I've tried everything, almost lost all hope, thank you thank you thank you! Works like a charm!
Vuka22 said:
OMG I LOVE YOU... I've tried everything, almost lost all hope, thank you thank you thank you! Works like a charm!
Click to expand...
Click to collapse
thanks
Sorry this tool working on G3 F400K?
Thanks bro. Good job.
KHUN VEASNA said:
Sorry this tool working on G3 F400K?
Click to expand...
Click to collapse
I think it should be work because both have same chipset 8974 but not sure it will work or not.. .because the dll for d855...you can try use your kdz and the given .dll .....but still i am saying i am not sure.
Anik49 said:
I think it should be work because both have same chipset 8974 but not sure it will work or not.. .because the dll for d855...you can try use your kdz and the given .dll .....but still i am saying i am not sure.
Click to expand...
Click to collapse
Yes it worked for my f400k. Thanks you so much.
Im Stuck in MM after the update to 6.0 Will any of these firmwares work for the D 850 ? thanks
louvass said:
Im Stuck in MM after the update to 6.0 Will any of these firmwares work for the D 850 ? thanks
Click to expand...
Click to collapse
You have to use lg d850 firmware.
Anik49 said:
You have to use lg d850 firmware.
Click to expand...
Click to collapse
yea i followed the link from the OP and put in my imei and it said no firmware avail. so where do we get this? for At&t d850?
killerskincanoe said:
yea i followed the link from the OP and put in my imei and it said no firmware avail. so where do we get this? for At&t d850?
Click to expand...
Click to collapse
http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/AT&T+D850/
Here i think you will find d850 stock tot file...
Anik49 said:
first of all i want to say that i already seen similiar thread like mine but it is all about using tot method but my thread is all about lg up .
First of all it"s not my work,full credit goes to autoprime. On autoprime thread in the first page i dont see the updated dll file,he gives the update few page later. So i think people face problem during downgrade like me, So thats why i am opening this thread but if moderator thinks its not nedded, please delete this thread.
so here are the Steps
download kdz for your phone from here http://lg-firmware-rom.com/
install dll file from attachement
installing lg up and how to connect your phone...follow the instruction from here http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
make sure you install dll file before lg up.
Open LGUP on your computer, click on upgrade and point it towards your LP KDZ. Close LGUP and re-open LGUP and select refubrish.. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. Now you are done and hope it helps people, who are face trouble during downgrade like me also don't forget to hit thanks if it's helpful to you.
Click to expand...
Click to collapse
Works like a charm for me thanks alot.. mine was LG G3 F460L korean variant. from MM to LP im back to Go, i decided to go for LP due to no proper root in MM.
Anik49 said:
first of all i want to say that i already seen similiar thread like mine but it is all about using tot method but my thread is all about lg up .
First of all it"s not my work,full credit goes to autoprime. On autoprime thread in the first page i dont see the updated dll file,he gives the update few page later. So i think people face problem during downgrade like me, So thats why i am opening this thread but if moderator thinks its not nedded, please delete this thread.
so here are the Steps
download kdz for your phone from here http://lg-firmware-rom.com/
install dll file from attachement
installing lg up and how to connect your phone...follow the instruction from here http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
make sure you install dll file before lg up.
Open LGUP on your computer, click on upgrade and point it towards your LP KDZ. Close LGUP and re-open LGUP and select refubrish.. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. Now you are done and hope it helps people, who are face trouble during downgrade like me also don't forget to hit thanks if it's helpful to you.
Click to expand...
Click to collapse
OMG! you're the man! All this time, i've been installing the LGUP before the dll. no one said it's the other way round. Thanks a ton!
How do I register the DLL file? I am running Windows 7 64-bit and I get this error when trying to register using regsvr32 in both system32 and syswow64 folder.
The module "LGVS985_20140620_LGFLASHv160.dll" was loaded but the entry-point DllRegisterServer was not found. Make sure that "LGVS985_20140620_LGFLASHv160.dll" is a valid DLL or OCX file and then try again.
dannyx4112 said:
How do I register the DLL file? I am running Windows 7 64-bit and I get this error when trying to register using regsvr32 in both system32 and syswow64 folder.
The module "LGVS985_20140620_LGFLASHv160.dll" was loaded but the entry-point DllRegisterServer was not found. Make sure that "LGVS985_20140620_LGFLASHv160.dll" is a valid DLL or OCX file and then try again.
Click to expand...
Click to collapse
Sorry but I am also using Windows 7 64bit everything works fine here
Anik49 said:
Sorry but I am also using Windows 7 64bit everything works fine here
Click to expand...
Click to collapse
You were able to install the DLL posted in this thread using regsvr32?
dannyx4112 said:
You were able to install the DLL posted in this thread using regsvr32?
Click to expand...
Click to collapse
Yes I just install it....click and it install.
Anik49 said:
Yes I just install it....click and it install.
Click to expand...
Click to collapse
Ok I think i solved that problem.. But now when I try to download the KDZ using my IMEI from the link you gave it says:
Model:LGVS985WK
Suffix:AVRSWH1
Latest Firmware:
No Firmware Found Yet
To Request Firmware:
Copy above information and send us in this Contact Form
Can I use any KDZ for VS985?
dannyx4112 said:
Ok I think i solved that problem.. But now when I try to download the KDZ using my IMEI from the link you gave it says:
Model:LGVS985WK
Suffix:AVRSWH1
Latest Firmware:
No Firmware Found Yet
To Request Firmware:
Copy above information and send us in this Contact Form
Can I use any KDZ for VS985?
Click to expand...
Click to collapse
Verizon firmware http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/Verizon+VS985/
Anik49 said:
Verizon firmware http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/Verizon+VS985/
Click to expand...
Click to collapse
Thank you for your help, much appreciated. I have been running into this problem when trying to refurbish 47a or 48a. When LGUP is waiting 120 seconds for restart (about 80% in LGUP), my phone just keep restarting without completing the installation. It keeps bootlooping and then LGUP keeps waiting for my phone to restart. LGUP will say 100% but my phone is just bootlooping constantly.
can anyone share me the TOT file for LG G4 H811. i searched the entire internet and i cant find it.
Thanks
themaskofwraith said:
can anyone share me the TOT file for LG G4 H811. i searched the entire internet and i cant find it.
Thanks
Click to expand...
Click to collapse
what for,?
I rooted ny phone and changed build.props model name. And now i can't boot.
raptorddd said:
what for,?
Click to expand...
Click to collapse
hi canu pls share tot file. thanks
themaskofwraith said:
hi canu pls share tot file. thanks
Click to expand...
Click to collapse
therrs no tot file . only kdz
Can you use ADB / Fastboot? Do you have USB debugging enabled on your phone? Maybe you can pull the build.prop file, modify it and then push it back.
themaskofwraith said:
hi canu pls share tot file. thanks
Click to expand...
Click to collapse
can you enter download mode.??
press vol up then connect usb cable if yes.. then download your phone variant KDZ and flash it using LGUP program to go back to stock firmware and fix if not booting.
raptorddd said:
can you enter download mode.??
press vol up then connect usb cable if yes.. then download your phone variant KDZ and flash it using LGUP program to go back to stock firmware and fix if not booting.
Click to expand...
Click to collapse
LG UP doesnt recognize the device and says unknown model. bcz i changed model name in buildprops. And i cant change it back bcz i cant boot and stuck on LG Logo. Thats is the reason i wanna try tot file method
themaskofwraith said:
LG UP doesnt recognize the device and says unknown model. bcz i changed model name in buildprops. And i cant change it back bcz i cant boot and stuck on LG Logo. Thats is the reason i wanna try tot file method
Click to expand...
Click to collapse
as far as i know ther isnt any TOT.
He can't use LGUP because the model name is changed in build.prop.
raptorddd said:
as far as i know ther isnt any TOT.
Click to expand...
Click to collapse
Never thought u can brick a device by changing model name. Do u have any idea on how can i get this device to work .
themaskofwraith said:
Never thought u can brick a device by changing model name. Do u have any idea on how can i get this device to work .
Click to expand...
Click to collapse
not sure. i know ive seen post just like yours . that edited build.prop and phone no longer worked.. maybe do a search and try to read and see if they did found a solution for it.. sorry good luck.
raptorddd said:
not sure. i know ive seen post just like yours . that edited build.prop and phone no longer worked.. maybe do a search and try to read and see if they did found a solution for it.. sorry good luck.
Click to expand...
Click to collapse
Thanks i searched the internet i dont think there is a fix. need to take it to the LG Store i guess. i have Never seen a android phone that doesnt let you get into fastboot until LG G4.
themaskofwraith said:
Thanks i searched the internet i dont think there is a fix. need to take it to the LG Store i guess. i have Never seen a android phone that doesnt let you get into fastboot until LG G4.
Click to expand...
Click to collapse
search herei n the lg g4 forum.
LGUP TOT
my problem is that LGUP only reads TOT files so my KDZs don't work. I also have the LG h811 build.
DellyBoi18 said:
my problem is that LGUP only reads TOT files so my KDZs don't work. I also have the LG h811 build.
Click to expand...
Click to collapse
you got it the wrong way.. LGUP uses KDZ only.. you need to uncompress kdz zip file.. the open LGUP. select upgrade then on lower bar browse file .. close LGUP open it up and select refurbished and start...:good:
raptorddd said:
you got it the wrong way.. LGUP uses KDZ only.. you need to uncompress kdz zip file.. the open LGUP. select upgrade then on lower bar browse file .. close LGUP open it up and select refurbished and start...:good:
Click to expand...
Click to collapse
I always uncompress rar/zip files unless otherwise instructed. LGUP only seeks for TOT files in my experience unless I am using the wrong version or something
DellyBoi18 said:
I always uncompress rar/zip files unless otherwise instructed. LGUP only seeks for TOT files in my experience unless I am using the wrong version or something
Click to expand...
Click to collapse
as far as i know inky KDZ and flashtools uses TOT.
heres is
https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
raptorddd said:
as far as i know inky KDZ and flashtools uses TOT.
heres is
https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
Click to expand...
Click to collapse
I figured it out. I typed * in the "File Name:" text box and pressed enter and everything showed.
Hello everyone. I have recently discovered that my LG G3 (32 GB model, running Android 5.0) has some missing features in the lock screen. The "None" feature which disables the lock screen completely was missing but for some reason it showed up when I deleted the Guest in my phone. I also know from various photos on the internet that the LG G3 has a function where you can unlock your phone by letting it recognise your face. This "Face Recognition" feature is also missing and I haven't managed to find a way to get it back. Can someone help me?
MariosAga said:
Hello everyone. I have recently discovered that my LG G3 (32 GB model, running Android 5.0) has some missing features in the lock screen. The "None" feature which disables the lock screen completely was missing but for some reason it showed up when I deleted the Guest in my phone. I also know from various photos on the internet that the LG G3 has a function where you can unlock your phone by letting it recognise your face. This "Face Recognition" feature is also missing and I haven't managed to find a way to get it back. Can someone help me?
Click to expand...
Click to collapse
Face Recognition is removed from most of phones nowadays,because easily somebody else can unlock your phone with his face..
And as I've seen some companies are developing this feature.
For the "none" i think in 5.0 LG removed it.(I'm not really sure about that)well you can use "swipe" for now.
Also why don't you upgrade to 6.0?It has the "None" for the lock screen and also it has really great performance!
Yeah well I've tried to upgrade it to Marshmallow but I don't know how. I tried LG pc suite but that didn't work. Do you know how to do it?
MariosAga said:
Yeah well I've tried to upgrade it to Marshmallow but I don't know how. I tried LG pc suite but that didn't work. Do you know how to do it?
Click to expand...
Click to collapse
Warning
With this method your phone may get bricked and everything will get wiped
If you want to proceed then follow these steps
Go to Settings,then Device information and tell me your device model.
Okay but if I do everything correctly then nothing bad to the device will happen, right?
P.S. Device model: LG-D855
MariosAga said:
Okay but if I do everything correctly then nothing bad to the device will happen, right?
P.S. Device model: LG-D855
Click to expand...
Click to collapse
Yes.
Now tell me what Windows version do you have? Windows 7?
Windows 10
MariosAga said:
Windows 10
Click to expand...
Click to collapse
Not necessary
Before starting you may need to backup your photos,etc.
Go to Settings then "Backup and Reset" then you will see "LG Backup" click on it and make the backup.After all these steps move your backup file to yiur SD Card or to your PC.(Go to File Explorer then to the folder "LG backups")
So let's go on..!
Go here and select the first one.
http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/D855/Android+6.0/
Then go over here
http://forum.xda-developers.com/showthread.php?t=2785089
And scroll down to "How to flash ROM kdz method"
Enable usb debugging
https://www.recovery-android.com/enable-usb-debugging-on-android.html#part1
Connect your phone to your PC
Download Lg drivers(Not Verizon one's!)
Download Lguptool, unzip it,open the folder and inside of it where all the lguptool files are located move the kdz file that you downloaded.
Open lguptool with admin prompt!
Select type CMDA and phone mode DIAG
Select the kdz file and click "CSE Flash"
Then click "start"
A menu will appear,select language and click "Ok"
After all these steps you will need to wait till the phone boots.
Then you will be able to root your phone and flash ROMs!
Good luck!
(A "thank you" would be really appreciated!)
Thanks! I really appreciate you helping me! But do I need to root my phone in order to do that?
MariosAga said:
Thanks! I really appreciate you helping me! But do I need to root my phone in order to do that?
Click to expand...
Click to collapse
No there is no need to Root your device.Only follow the guide that i made.
Okay! Now that I got back my computer I can do it. I just have one more question. My phone will be updated by installing custom roms? Will that wipe off my phone's guarantee? Because it lasts for two more years and I don't want to lose it now.
MariosAga said:
Okay! Now that I got back my computer I can do it. I just have one more question. My phone will be updated by installing custom roms? Will that wipe off my phone's guarantee? Because it lasts for two more years and I don't want to lose it now.
Click to expand...
Click to collapse
Yes it will wipe your guarantee so you need to make a choice.
hello i have a long way problem with my lg g4 h815 it was replaced in a new motherboard after the famus bootloop and it come back to me with lolipop version i update a version to marshmallow 6.0 in lg bridge that not fit for my device and all the time i get message that tell me warning current version is not available for user cant find matched cust for nt code mcc/mnc{FFFF}subset {11}.
sense then i try 2do alot of things like root the device its not giving me. i registerd in lg put imei&id number thay say that my device its from singapore and it cant be rooted and im from israel so about that i dont understand how i get a singapore device i buy it here in israel.
so before that i try do flash a new firmware in lg flash tool i installed all lg drivers for that+ c+++ runtime like total everything and steel its not working its allways tell me connection to server failed try again in a moment i try dosent of guide tutorials and i cant succeeded i dont know what else 2do i just wanna wipe out this current version and install a new one with hebrew in it and nurmal function OS.
i know that i probebly missing something but i dont know waht
il be very happy to get some profassional help about this matter.
thank you!
use LGUP
It’s supposed to show connection to server failed. You move it out of the way. But since your running MM you must use LGUP
Sent from my iPhone using Tapatalk
hyelton said:
It’s supposed to show connection to server failed. You move it out of the way. But since your running MM you must use LGUP
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
i try with LGUP and it didnt work can you give me please more informatiom how to make it propelly?
kobisa25 said:
i try with LGUP and it didnt work can you give me please more informatiom how to make it propelly?
Click to expand...
Click to collapse
Would need more info than just it didn’t work [emoji14]
What do you mean didn’t work? Error message?
Your using a usb 2.0 port correct? USB 3.0 won’t work.
Also who replaced the motherboard? LG? It’s quite possible you no longer have an H815
Sent from my iPhone using Tapatalk
kobisa25 said:
hello i have a long way problem with my lg g4 h815 it was replaced in a new motherboard after the famus bootloop and it come back to me with lolipop version i update a version to marshmallow 6.0 in lg bridge that not fit for my device and all the time i get message that tell me warning current version is not available for user cant find matched cust for nt code mcc/mnc{FFFF}subset {11}.
...
thank you!
Click to expand...
Click to collapse
It appears that the LG G4 model for Israel is H815L - you want to confirm that is your model and then look for the firmware for the 6.0 kdz for that model for your specific carrier and, as suggested above, use LGUP-NEW (https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803) to upgrade.
The H815L model doesn't appear to have a bootloader that can be officially unlocked (I will stand corrected if that is not the case). If correct, you will not be able to root your device with android 6.0. You can however root android 5.1, following this guide: https://forum.xda-developers.com/g4/general/lg-g4-100-root-success-directives-root-t3180586
If you bought the phone originally from your carrier in Israel and LG didn't provide you the correct motherboard for your phone when they repaired it, you have a good case to go back to them and insist on the correct one.
hyelton said:
Would need more info than just it didn’t work [emoji14]
What do you mean didn’t work? Error message?
Your using a usb 2.0 port correct? USB 3.0 won’t work.
Also who replaced the motherboard? LG? It’s quite possible you no longer have an H815
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
: ) its h815 its right in the hardware info.
in the bin action LGUP all the time he didnt find the kdz i try to downgrade back to lolipop or install a fit MM for my device.
i try both USB 2.0 & 3.0.
the device steel was in warranty so the company that deel with that replace a new motherboard for h815.
i beleive that i miss something in the LGUP about the lg flash tool you allready tell me that i cant so i must use this one with new instructions : )
kobisa25 said:
: ) its h815 its right in the hardware info.
in the bin action LGUP all the time he didnt find the kdz i try to downgrade back to lolipop or install a fit MM for my device.
i try both USB 2.0 & 3.0.
the device steel was in warranty so the company that deel with that replace a new motherboard for h815.
i beleive that i miss something in the LGUP about the lg flash tool you allready tell me that i cant so i must use this one with new instructions : )
Click to expand...
Click to collapse
But what error do you have in lgup?
What do you mean by hardware info? Only real way to know it’s have the phone apart and look at the actual motherboard. Hardware info will say whatever firmware is flashed on it.
If LG them selfs didn’t warranty it it’s quite possible it has a different mode motherboard. It’s extremely common with the G4.
All you do is run lgup, choose refurbish and choose the kdz file. There’s nothing more to do. Just don’t use usb 3.0 as it won’t work.
Sent from my iPhone using Tapatalk
hyelton said:
But what error do you have in lgup?
What do you mean by hardware info? Only real way to know it’s have the phone apart and look at the actual motherboard. Hardware info will say whatever firmware is flashed on it.
If LG them selfs didn’t warranty it it’s quite possible it has a different mode motherboard. It’s extremely common with the G4.
All you do is run lgup, choose refurbish and choose the kdz file. There’s nothing more to do. Just don’t use usb 3.0 as it won’t work.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
first of all thanks 4 answering!
lke i said it didnt find the kdz file on any place when i try to refurbish but i downloaded again and now i will try to do like you said on usb 2.0.
so about the kdz if its not H815 how do i know what to flash on it?
downgrade upgrade?
sdembiske said:
It appears that the LG G4 model for Israel is H815L - you want to confirm that is your model and then look for the firmware for the 6.0 kdz for that model for your specific carrier and, as suggested above, use LGUP-NEW (https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803) to upgrade.
The H815L model doesn't appear to have a bootloader that can be officially unlocked (I will stand corrected if that is not the case). If correct, you will not be able to root your device with android 6.0. You can however root android 5.1, following this guide: https://forum.xda-developers.com/g4/general/lg-g4-100-root-success-directives-root-t3180586
If you bought the phone originally from your carrier in Israel and LG didn't provide you the correct motherboard for your phone when they repaired it, you have a good case to go back to them and insist on the correct one.
Click to expand...
Click to collapse
so i try again with LGUP usb debugging is on mtp usb choice is on its recognised
it in device manager in the step of to chose bin file-kdz there is nothing there in the model file even when i put the file there its just dont show it.
kobisa25 said:
first of all thanks 4 answering!
lke i said it didnt find the kdz file on any place when i try to refurbish ...
downgrade upgrade?
Click to expand...
Click to collapse
You upgrade to go from 5.1 to 6.0
You refurbish to go from 6.0 down to 5.1
kobisa25 said:
so i try again with LGUP usb debugging is on mtp usb choice is on its recognised
it in device manager in the step of to chose bin file-kdz there is nothing there in the model file even when i put the file there its just dont show it.
Click to expand...
Click to collapse
In LGUP-NEW, in order for it to find the kdz file you have downloaded, you must first select upgrade and search for the file/folder where you placed the kdz you downloaded. If downgrading, you still have to select upgrade first, load the kdz when you select it, then close the LGUP-NEW app. When you re-open it, it will have the file that you selected ready to go and refurbish will already be selected.
Make sure that you are using LGMobileDriver_WHQL_Ver_4.2.0 on your PC as your driver. You can download it from the LG US support site, if you are not using the correct one.
As hyelton suggested already, the only sure way to know what your motherboard is, is to open the phone and look for the model number on the motherboard. My suspicion is that you should be using an H815L kdz but without motherboard model confirmation, one cannot be sure.
sdembiske said:
You upgrade to go from 5.1 to 6.0
You refurbish to go from 6.0 down to 5.1
In LGUP-NEW, in order for it to find the kdz file you have downloaded, you must first select upgrade and search for the file/folder where you placed the kdz you downloaded. If downgrading, you still have to select upgrade first, load the kdz when you select it, then close the LGUP-NEW app. When you re-open it, it will have the file that you selected ready to go and refurbish will already be selected.
Make sure that you are using LGMobileDriver_WHQL_Ver_4.2.0 on your PC as your driver. You can download it from the LG US support site, if you are not using the correct one.
As hyelton suggested already, the only sure way to know what your motherboard is, is to open the phone and look for the model number on the motherboard. My suspicion is that you should be using an H815L kdz but without motherboard model confirmation, one cannot be sure.
Click to expand...
Click to collapse
thank you i did what you guys said& it work until i got a breek error code =0x2000 invalid command respone i cant go on probebly beacuse its not the right kdz for my phone i steel search now the proper fit 6.0 upgrade or lolipop 5.5 2downgrade that will work if i will find one.
kobisa25 said:
thank you i did what you guys said& it work until i got a breek error code =0x2000 invalid command respone i cant go on probebly beacuse its not the right kdz for my phone i steel search now the proper fit 6.0 upgrade or lolipop 5.5 2downgrade that will work if i will find one.
Click to expand...
Click to collapse
It sounds like a DLL file issue. You will need the correct DLL files for your phone model.
You could try using UPPERCUT: Add Any LG Device to LGUP for TOT/KDZ Flashing (G4|G5|G6|V10|V20|MORE???) from this thread: https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
sdembiske said:
It sounds like a DLL file issue. You will need the correct DLL files for your phone model.
You could try using UPPERCUT: Add Any LG Device to LGUP for TOT/KDZ Flashing (G4|G5|G6|V10|V20|MORE???) from this thread: https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
Click to expand...
Click to collapse
so i didnt wait i download lg bridge and its flash back the old miss currect version for my device.
this is the kdz that on my phone if someone know about it
v20i-OPT1-YT.
i wanna try again with LGUP but now with uppercut like you said i just need to find the right 6.0 MM or lolipop 5.0.
i press the uppercut 2gether after i start the LGUP and its tell me there is no handset connect please connect a handset.
i download 2 diffrent kdz& i beleive that i will get breek again steel dont find the match kdz version 4 my device.
kobisa25 said:
so i didnt wait i download lg bridge and its flash back the old miss currect version for my device.
this is the kdz that on my phone if someone know about it
v20i-OPT1-YT.
i wanna try again with LGUP but now with uppercut like you said i just need to find the right 6.0 MM or lolipop 5.0.
i press the uppercut 2gether after i start the LGUP and its tell me there is no handset connect please connect a handset.
i download 2 diffrent kdz& i beleive that i will get breek again steel dont find the match kdz version 4 my device.
Click to expand...
Click to collapse
You could check out this kdz: https://forum.xda-developers.com/g4/general/kdz-firmware-v20i-france-2016-10-04-t3474227
Seems it can be flashed (LGUP-NEW) successfully on a lot of different H815 models.
See if you can change the language in your settings. If not, read through the posts in this thread (https://forum.xda-developers.com/g4/help/lg-g4-h815-hebrew-removed-restart-t3186330/page2) - one of the members has posted an app (in post # 12) that will help.
That's all I got for you. Wish you luck.
sdembiske said:
You could check out this kdz: https://forum.xda-developers.com/g4/general/kdz-firmware-v20i-france-2016-10-04-t3474227
Seems it can be flashed (LGUP-NEW) successfully on a lot of different H815 models.
See if you can change the language in your settings. If not, read through the posts in this thread (https://forum.xda-developers.com/g4/help/lg-g4-h815-hebrew-removed-restart-t3186330/page2) - one of the members has posted an app (in post # 12) that will help.
That's all I got for you. Wish you luck.
Click to expand...
Click to collapse
thanks allot i will try it.
and i hope 2come back with good results.
LG-m
hyelton said:
But what error do you have in lgup?
What do you mean by hardware info? Only real way to know it’s have the phone apart and look at the actual motherboard. Hardware info will say whatever firmware is flashed on it.
If LG them selfs didn’t warranty it it’s quite possible it has a different mode motherboard. It’s extremely common with the G4.
All you do is run lgup, choose refurbish and choose the kdz file. There’s nothing more to do. Just don’t use usb 3.0 as it won’t work.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
hey so i try all the tutorials 4 LGUP&i didnt succeeded i get all the time the
error code =0x2000 invalid command respone.
i did what you suggested& i go 2 the store & open the phone to get the real model of it i will upload a url lin
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
k 4it. if there is any chance to steel make downgrade or upgrade 2 something that will work.
thanks 4 any help.
ALL-GOOD!
sdembiske said:
You could check out this kdz: https://forum.xda-developers.com/g4/general/kdz-firmware-v20i-france-2016-10-04-t3474227
Seems it can be flashed (LGUP-NEW) successfully on a lot of different H815 models.
See if you can change the language in your settings. If not, read through the posts in this thread (https://forum.xda-developers.com/g4/help/lg-g4-h815-hebrew-removed-restart-t3186330/page2) - one of the members has posted an app (in post # 12) that will help.
That's all I got for you. Wish you luck.
Click to expand...
Click to collapse
hi i succeeded i find the right stock rom extract it with WindowsLGFirmwareExtract-1.2.5.0-Release
and with this dll i downgraded to lollipop 5.0 with LGUP-NEW.
i wanted 2 thank you you help me2 :good:
kobisa25 said:
hi i succeeded i find the right stock rom extract it with WindowsLGFirmwareExtract-1.2.5.0-Release
and with this dll i downgraded to lollipop 5.0 with LGUP-NEW.
i wanted 2 thank you you help me2 :good:
Click to expand...
Click to collapse
Thanks for letting me know. Glad you got there.
If you want to gain root now, check out the following thread: https://forum.xda-developers.com/g4/general/lg-g4-100-root-success-directives-root-t3180586
You can then install Xposed when rooted and customize your rom a bit.
I would also suggest you check out steadfasterX's TWRP-inFiSH (https://forum.xda-developers.com/g4/development/locked-twrpinfish-locked-g4-devices-t3573048) - it's a custom TWRP version developed by him for LG G4's with locked bootloaders that will allow you to back up your rooted system image, so that you can always restore back to where you were. It works like a charm and I recommend it.
great!
sdembiske said:
Thanks for letting me know. Glad you got there.
If you want to gain root now, check out the following thread: https://forum.xda-developers.com/g4/general/lg-g4-100-root-success-directives-root-t3180586
You can then install Xposed when rooted and customize your rom a bit.
I would also suggest you check out steadfasterX's TWRP-inFiSH (https://forum.xda-developers.com/g4/development/locked-twrpinfish-locked-g4-devices-t3573048) - it's a custom TWRP version developed by him for LG G4's with locked bootloaders that will allow you to back up your rooted system image, so that you can always restore back to where you were. It works like a charm and I recommend it.
Click to expand...
Click to collapse
thank you sdembiske i will check it and try 2 rood my device even that lg himself told me that my specific device cant be rooted but like you said there is a way
I had this issue last night so thought id save people some trouble and share the the file needed incase you need to flash over 20D's KDZ file either to go back or forward.
Please unzip and put in C:\Program Files (x86)\LG Electronics\LGUP\model\common
Works with LGUP 1.14
Whiskeyomega said:
I had this issue last night so thought id save people some trouble and share the the file needed incase you need to flash over 20D's KDZ file either to go back or forward.
Please unzip and put in C:\Program Files (x86)\LG Electronics\LGUP\model\common
Works with LGUP 1.4
Click to expand...
Click to collapse
Do you happen to have a link to LGUP 1.4? I can only find 1.14.3.
Thanks
Interesting. Looks like they updated the KDZ format again.
*Sigh*
-- Brian
dvgb173 said:
Do you happen to have a link to LGUP 1.4? I can only find 1.14.3.
Thanks
Click to expand...
Click to collapse
sorry i meant 1.14 just missed a 1 out.
dvgb173 said:
Do you happen to have a link to LGUP 1.4? I can only find 1.14.3.
Thanks
Click to expand...
Click to collapse
1.14 is the latest. I found some other typos in other LG threads also calling it "1.4".
Sent via open market LG US998 V30/V30+
Damn.
I had it working with 1.14, but I thought I had the wrong version. So I uninstalled it.
Now I can't get it to load - wrong dll for VS99620a.
Plus I wanted the developer version of LGUP.
Pretty sure I need the Partition option to flash other-model KDZ.
Hi there,
I need some help because i fell so stupid.... I cannot use the patched DLL for uppercut in order to flash the newest Oreo KDZ for H930...
I installed LGUP 1.14, USB DRiervs, etc... Download and uncompress uppercut 1.0.0.0. I downloaded the patched DLL 1.0.31.9. Even if I copy that dll on the uppercut folder or wherever i copy, the version shown on LGUP is always the 1.0.28.9... SO I cannot flash the latest Oreo KDZ
Help please?
thx in advance
you have to run lgup.exe not uppercut shortcut.
Dizzyrul3z said:
you have to run lgup.exe not uppercut shortcut.
Click to expand...
Click to collapse
****...!!! You're right...
I didn't create the common folder. I thought yes, but no...
Thx a lot!!!!
wont let me create common folder after created disapears
suckme69 said:
wont let me create common folder after created disapears
Click to expand...
Click to collapse
Check permissions. It was my previous fault
kherio said:
Check permissions. It was my previous fault
Click to expand...
Click to collapse
My bad my folders in setting was hidden
Hi, has anyone been able to revert back to N from O, please? I upgraded my H930DS (Hong Kong) to the Open Euro 20d ROM, but haven't been able to go back to N using either the patched LGUP or UPPERCUT (… I'm not happy with the limitation on the use of the dual SIM). With the phone in download mode, the error I get is "DLL for H93020d is invalid. Please install valid DLL package(*.msi) for the model". I get the same message if I try both methods with the phone in its normal operating mode. Thanks for any help.
peterjcar said:
Hi, has anyone been able to revert back to N from O, please?
Click to expand...
Click to collapse
Yes. I saw a report yesterday of someone who had downgraded. Just flash the KDZ:
autoprime said:
to downgrade just use the new oreo lgup_common.dll and you should be able to flash previous N KDZs again in LGUP.
Click to expand...
Click to collapse
peterjcar said:
Hi, has anyone been able to revert back to N from O, please? I upgraded my H930DS (Hong Kong) to the Open Euro 20d ROM, but haven't been able to go back to N using either the patched LGUP or UPPERCUT (… I'm not happy with the limitation on the use of the dual SIM). With the phone in download mode, the error I get is "DLL for H93020d is invalid. Please install valid DLL package(*.msi) for the model". I get the same message if I try both methods with the phone in its normal operating mode. Thanks for any help.
Click to expand...
Click to collapse
hi, I am using H930DS (Hong Kong) too.
Could you please tell me how flash the Open Euro 20d ROM?
Thanks!!!
kimball said:
hi, I am using H930DS (Hong Kong) too.
Could you please tell me how flash the Open Euro 20d ROM?
Thanks!!!
Click to expand...
Click to collapse
ROM or the KDZ? You probably mean the stock open European KDZ.
For the KDZ, go to the thread. Instructions are there.
https://forum.xda-developers.com/showthread.php?t=3779076
Sent via open market LG US998 V30/V30+
ChazzMatt said:
Yes. I saw a report yesterday of someone who had downgraded. Just flash the KDZ:
Click to expand...
Click to collapse
Thanks, but I think the operative word in that quote is "should". I've tried that method with the phone in download mode and with it in its normal operating mode, but LGUP no longer recognises my phone model. I can get the LGUP pop-up with the serial port but the pop-up shows the phone as an unknown model, which I guess is the issue preventing the firmware update.
The version of LGUP_common.dll that I'm using is 1.0.35.3, which should be the latest. Its digital signature is dated Tuesday, 19 December 2017 3:33:29 PM. Its MD5# is c3df15812c1294028bfd330eb725519b.
i doesn't work for me on my ls998 v30+ sprint. do i need to make new folder (common) in the model folder? i tried with and without...
Looks like there's no going back...
peterjcar said:
Thanks, but I think the operative word in that quote is "should". I've tried that method with the phone in download mode and with it in its normal operating mode, but LGUP no longer recognises my phone model. I can get the LGUP pop-up with the serial port but the pop-up shows the phone as an unknown model, which I guess is the issue preventing the firmware update.
The version of LGUP_common.dll that I'm using is 1.0.35.3, which should be the latest. Its digital signature is dated Tuesday, 19 December 2017 3:33:29 PM. Its MD5# is c3df15812c1294028bfd330eb725519b.
Click to expand...
Click to collapse
Here is the reply I received from LG about reverting to Nougat (I asked them to do it for a fee):
"Dear Peter,
Thank you for contacting LG Customer Support. I apologise, but please be advised that we cannot put back your the previous software of your phone.
We suggest that you perform Factory Reset to your phone. This will not restore its previous software, but can fix issues of your phone. However, this will delete everything saved in your phone memory. You may back up first your files.
To reset:
Go to Settings
Select Backup & Reset
Select Factory Data Reset
If the issue will still continue, please let us know so we can assist you further.
Thank you. Have a great day ahead.
If you have any further questions or concerns, you can click on the link below to respond via email.
To help improve our Quality of Service, w e would appreciate it if you could complete our Customer Service Survey using the Survey link below.
Yours Sincerely,
Allen B.
Customer Care Representative
LG Electronics Australia & New Zealand"
… However, I was able to flash my LGH930DS to Oreo for the LGH930DS using LG Bridge after a few attempts (I couldn't get UPPERCUT to revert my phone to Nougat), resolving my issue with using the dual-SIM with the cross-flashed firmware and thus obviating my need to revert to Nougat.
Looking for some guidance please & thanks.
I have a H933, converted using the Frankenstein method to a US998. Then Unlocked BL, TWRP and rooted. Upgraded to US99820d
I would now like to flash back to stock H933. I have installed the Patched version of LGUP. I have extracted the DLL here into a common folder inside the model folder. I put the phone in Download mode, plug it in and then launch LGUP (patched). it finds the device but then errors saying the DLL is not valid for US98820d and to get a compatible DLL.