Develop Bugs

[Q] Help!!! Flash F400K to D855, not load system

I ask for help. I tried to stitch an insertion from D855 on the F400K, having changed build.prop, Flashtool stopped with a mistake [ERROR]: Partition Change system Partition (Phone! =tot). I stitched KDZ D855 further. System not start. Boot-loop. Flashtool refuses to stitch, model is different. What to do how to return an initial insertion from F400K?

Just so I understand did you try to flash an EU handset with a Korean one?

daleski75 said:
Just so I understand did you try to flash an EU handset with a Korean one?
Click to expand...
Click to collapse
Yes. I buy korea model F400K and change file build.prop from D855, and flash with Flashtool

Try this guide.
http://forum.xda-developers.com/showthread.php?t=2772199

daleski75 said:
Try this guide.
http://forum.xda-developers.com/showthread.php?t=2772199
Click to expand...
Click to collapse
This method doesn't work, the model already is defined by D855RE
P.S. The problem was solved by dll editing that Flashtool didn't stop at mistakes. DLL were changed by the person maloma from 4PDA forum.

DenisDA said:
This method doesn't work, the model already is defined by D855RE
P.S. The problem was solved by dll editing that Flashtool didn't stop at mistakes. DLL were changed by the person maloma from 4PDA forum.
Click to expand...
Click to collapse
Could you post the solution ? I also encounter the same question . Thanks:crying:

Wait let me get this right.
Which model did you buy.
Which model firmware did you flash?
Changing build.prop doesn't alter the device, the Korean models have different radio's and different partitions flashing the wrong firmware is highly likely to cause an irrecoverable brick.

serect said:
Could you post the solution ? I also encounter the same question . Thanks:crying:
Click to expand...
Click to collapse
If you are flash to D855 and download mode is possible, flash with Flashtool back with this dll gfile.ru/abRXC and the insertion of TOT, after flash I recommend strongly to make repeated flash with native dll

Lennyuk said:
Wait let me get this right.
Which model did you buy.
Which model firmware did you flash?
Changing build.prop doesn't alter the device, the Korean models have different radio's and different partitions flashing the wrong firmware is highly likely to cause an irrecoverable brick.
Click to expand...
Click to collapse
You're an RD so im sure you know, ANy idea how to get the d855 to show the LTE bands in the service menu/secret menu?
People have bought it to use in the states on AT&T which uses 700mhz spectrum but cant get it to work and cant change what bands to use since they're not shown at all in the service menu.

DenisDA said:
If you are flash to D855 and download mode is possible, flash with Flashtool back with this dll gfile.ru/abRXC and the insertion of TOT, after flash I recommend strongly to make repeated flash with native dll
Click to expand...
Click to collapse
So it is impossible to flash F400K to D855 , right ?:crying:

serect said:
So it is impossible to flash F400K to D855 , right ?:crying:
Click to expand...
Click to collapse
They have different radios.
Will probably brick it.

serect said:
So it is impossible to flash F400K to D855 , right ?:crying:
Click to expand...
Click to collapse
Yes, wait custom firmware

DenisDA said:
If you are flash to D855 and download mode is possible, flash with Flashtool back with this dll gfile.ru/abRXC and the insertion of TOT, after flash I recommend strongly to make repeated flash with native dll
Click to expand...
Click to collapse
You are a legend mate! Been searching this for days now! My F400K that thinks it's a F400L has now been fully reflashed back to F400K10G build.

d855re
DenisDA said:
This method doesn't work, the model already is defined by D855RE
P.S. The problem was solved by dll editing that Flashtool didn't stop at mistakes. DLL were changed by the person maloma from 4PDA forum.
Click to expand...
Click to collapse
Hy , i have a lg g3 f400l 32go but in lg flashtool model is d855re, i try to flash with f400l and d855 tot and dell files but lg flashtools tels model device is diferent , check phone or dll , plese help me if you can ....

DenisDA said:
Yes, wait custom firmware
Click to expand...
Click to collapse
please post modified DLL to help others out. that link does not work

daddioj said:
please post modified DLL to help others out. that link does not work
Click to expand...
Click to collapse
I agree that would help out a lot of people.

daleski75 said:
I agree that would help out a lot of people.
Click to expand...
Click to collapse
My rate impossible post normal link.
drive.google.com/file/d/0B-H4G_jDRCJwRVhBcFdGVzFjTHc/edit?usp=sharing

DenisDA said:
Yes, wait custom firmware
Click to expand...
Click to collapse
Can you go to recovery ?! If you can, we can restore build.prop

hoangnova said:
Can you go to recovery ?! If you can, we can restore build.prop
Click to expand...
Click to collapse
I already restored long ago everything, thanks to this magic dll

DenisDA said:
I already restored long ago everything, thanks to this magic dll
Click to expand...
Click to collapse
with this dll , flashtool stop at 94% , i can't belive this ....
waiting for reset 40sec
mini os boot check ...
FAIL!!! Factory_BootComplete

need!! TOT file for 10i or 20i (D855 indian version)

Hi friends,
search for whole universe for the Indian tot file all i can find is only KDZ
now i need either the tot or a way to convert kdz to tot
i come across a software that can extract the kdz but nothing that can make a tot.
can someone over here help me out? i'm left with an expensive paper weight over here please help me out to convert it into a fine working mobile.
waiting.. any help...

jacktackle said:
Hi friends,
search for whole universe for the Indian tot file all i can find is only KDZ
now i need either the tot or a way to convert kdz to tot
i come across a software that can extract the kdz but nothing that can make a tot.
can someone over here help me out? i'm left with an expensive paper weight over here please help me out to convert it into a fine working mobile.
waiting.. any help...
Click to expand...
Click to collapse
Why do you need TOT so bad?
If you are Flashing, then it's easier (and safer) to Flash KDZ than TOT

573v3 said:
Why do you need TOT so bad?
If you are Flashing, then it's easier (and safer) to Flash KDZ than TOT
Click to expand...
Click to collapse
this mobile is brick n in qualcomm HS_USB QDLoader 9008 mode
only thing that can resurect this mobile is a original tot file. kdz is for only if you can get to proper download mode which i can't

jacktackle said:
this mobile is brick n in qualcomm HS_USB QDLoader 9008 mode
only thing that can resurect this mobile is a original tot file. kdz is for only if you can get to proper download mode which i can't
Click to expand...
Click to collapse
Ah! now you have explained a little more.......
Here is EURO .TOT for D955 . Use this, get your phone up and running, Flash your Indian .KDZ
http://forum.xda-developers.com/showthread.php?t=2870857

573v3 said:
Ah! now you have explained a little more.......
Here is EURO .TOT for D955 . Use this, get your phone up and running, Flash your Indian .KDZ
http://forum.xda-developers.com/showthread.php?t=2870857
Click to expand...
Click to collapse
i tried the euro already its 10e i need 10i specificaly as 10e fails saying model miss match thanks any ways
God i made a silly mistake instead of writing D855 it's written D955. I'm talking about G3 16gb

jacktackle said:
i tried the euro already its 10e i need 10i specificaly as 10e fails saying model miss match thanks any ways
God i made a silly mistake instead of writing D855 it's written D955. I'm talking about G3 16gb[/QUOTE
That's probably why you are getting model mismatch (D955/D855).
There should be no mismatch of version, as long as model is right.
Try one of these from @hyelton
http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/D855+TOTs/
Click to expand...
Click to collapse

jacktackle said:
i tried the euro already its 10e i need 10i specificaly as 10e fails saying model miss match thanks any ways
God i made a silly mistake instead of writing D855 it's written D955. I'm talking about G3 16gb
Click to expand...
Click to collapse
If you have to use a tot use any D855 16gb tot from my link above ^^. Using a different version /software version doesn't result in model mismatch.
Also what did you mean you couldn't get kdz to work because you don't have download mode? You cannot flash any stock firmware WITHOUT download mode. Your phone must be in download mode to flash.
And assuming your in download mode due to the error you had above.
Sent from my iPhone using Tapatalk

hyelton said:
If you have to use a tot use any D855 16gb tot from my link above ^^. Using a different version /software version doesn't result in model mismatch.
Also what did you mean you couldn't get kdz to work because you don't have download mode? You cannot flash any stock firmware WITHOUT download mode. Your phone must be in download mode to flash.
And assuming your in download mode due to the error you had above.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
but i read some forums that if i'm in qualcomm brick mode, i can flash from flash tools with tot file n a dll file. only if i have the right firmware. but i'm not sure how far i'm right.
i guess this G3 is a dead meat or may be only jtag can bring it back to life.

jacktackle said:
but i read some forums that if i'm in qualcomm brick mode, i can flash from flash tools with tot file n a dll file. only if i have the right firmware. but i'm not sure how far i'm right.
i guess this G3 is a dead meat or may be only jtag can bring it back to life.
Click to expand...
Click to collapse
Did you try a kdz? And or did you try the correct tot then?
Sent from my iPhone using Tapatalk

hyelton said:
Did you try a kdz? And or did you try the correct tot then?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
yes bro i've tried all flashers n all types the problem is my phone is in dead screen nothing can be seen but when you connect to computer its in qualcomm fastboot mode. i guess that needs to be fixed first mentioned in this forum.
http://lgunbrick.blogspot.com/2015/03/how-to-fix-fastboot-mode-on-lg-g-g2-g3.html
this guide works with 9006 brick but i'm in 9008 brick trying to contact the guy but no reply

jacktackle said:
yes bro i've tried all flashers n all types the problem is my phone is in dead screen nothing can be seen but when you connect to computer its in qualcomm fastboot mode. i guess that needs to be fixed first mentioned in this forum.
http://lgunbrick.blogspot.com/2015/03/how-to-fix-fastboot-mode-on-lg-g-g2-g3.html
this guide works with 9006 brick but i'm in 9008 brick trying to contact the guy but no reply
Click to expand...
Click to collapse
Well did you give it a try anyway?? It's not going to hurt.
Sent from my iPhone using Tapatalk

hyelton said:
Well did you give it a try anyway?? It's not going to hurt.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
in contact with aftab already but delay in getting reply's on xda

hi jacktacle
Did you find D85510i tot file?
I need this file.

Solution: Downgrade from MM to LP by using lg up

first of all i want to say that i already seen similiar thread like mine but it is all about using tot method but my thread is all about lg up .
First of all it"s not my work,full credit goes to autoprime. On autoprime thread in the first page i dont see the updated dll file,he gives the update few page later. So i think people face problem during downgrade like me, So thats why i am opening this thread but if moderator thinks its not nedded, please delete this thread.
so here are the Steps
download kdz for your phone from here http://lg-firmware-rom.com/
install dll file from attachement
installing lg up and how to connect your phone...follow the instruction from here http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
make sure you install dll file before lg up.
Open LGUP on your computer, click on upgrade and point it towards your LP KDZ. Close LGUP and re-open LGUP and select refubrish.. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. Now you are done and hope it helps people, who are face trouble during downgrade like me also don't forget to hit thanks if it's helpful to you.

OMG I LOVE YOU... I've tried everything, almost lost all hope, thank you thank you thank you! Works like a charm!

Vuka22 said:
OMG I LOVE YOU... I've tried everything, almost lost all hope, thank you thank you thank you! Works like a charm!
Click to expand...
Click to collapse
thanks

Sorry this tool working on G3 F400K?

Thanks bro. Good job.

KHUN VEASNA said:
Sorry this tool working on G3 F400K?
Click to expand...
Click to collapse
I think it should be work because both have same chipset 8974 but not sure it will work or not.. .because the dll for d855...you can try use your kdz and the given .dll .....but still i am saying i am not sure.

Anik49 said:
I think it should be work because both have same chipset 8974 but not sure it will work or not.. .because the dll for d855...you can try use your kdz and the given .dll .....but still i am saying i am not sure.
Click to expand...
Click to collapse
Yes it worked for my f400k. Thanks you so much.

Im Stuck in MM after the update to 6.0 Will any of these firmwares work for the D 850 ? thanks

louvass said:
Im Stuck in MM after the update to 6.0 Will any of these firmwares work for the D 850 ? thanks
Click to expand...
Click to collapse
You have to use lg d850 firmware.

Anik49 said:
You have to use lg d850 firmware.
Click to expand...
Click to collapse
yea i followed the link from the OP and put in my imei and it said no firmware avail. so where do we get this? for At&t d850?

killerskincanoe said:
yea i followed the link from the OP and put in my imei and it said no firmware avail. so where do we get this? for At&t d850?
Click to expand...
Click to collapse
http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/AT&T+D850/
Here i think you will find d850 stock tot file...

Anik49 said:
first of all i want to say that i already seen similiar thread like mine but it is all about using tot method but my thread is all about lg up .
First of all it"s not my work,full credit goes to autoprime. On autoprime thread in the first page i dont see the updated dll file,he gives the update few page later. So i think people face problem during downgrade like me, So thats why i am opening this thread but if moderator thinks its not nedded, please delete this thread.
so here are the Steps
download kdz for your phone from here http://lg-firmware-rom.com/
install dll file from attachement
installing lg up and how to connect your phone...follow the instruction from here http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
make sure you install dll file before lg up.
Open LGUP on your computer, click on upgrade and point it towards your LP KDZ. Close LGUP and re-open LGUP and select refubrish.. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. Now you are done and hope it helps people, who are face trouble during downgrade like me also don't forget to hit thanks if it's helpful to you.
Click to expand...
Click to collapse
Works like a charm for me thanks alot.. mine was LG G3 F460L korean variant. from MM to LP im back to Go, i decided to go for LP due to no proper root in MM.

Anik49 said:
first of all i want to say that i already seen similiar thread like mine but it is all about using tot method but my thread is all about lg up .
First of all it"s not my work,full credit goes to autoprime. On autoprime thread in the first page i dont see the updated dll file,he gives the update few page later. So i think people face problem during downgrade like me, So thats why i am opening this thread but if moderator thinks its not nedded, please delete this thread.
so here are the Steps
download kdz for your phone from here http://lg-firmware-rom.com/
install dll file from attachement
installing lg up and how to connect your phone...follow the instruction from here http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
make sure you install dll file before lg up.
Open LGUP on your computer, click on upgrade and point it towards your LP KDZ. Close LGUP and re-open LGUP and select refubrish.. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. Now you are done and hope it helps people, who are face trouble during downgrade like me also don't forget to hit thanks if it's helpful to you.
Click to expand...
Click to collapse
OMG! you're the man! All this time, i've been installing the LGUP before the dll. no one said it's the other way round. Thanks a ton!

How do I register the DLL file? I am running Windows 7 64-bit and I get this error when trying to register using regsvr32 in both system32 and syswow64 folder.
The module "LGVS985_20140620_LGFLASHv160.dll" was loaded but the entry-point DllRegisterServer was not found. Make sure that "LGVS985_20140620_LGFLASHv160.dll" is a valid DLL or OCX file and then try again.

dannyx4112 said:
How do I register the DLL file? I am running Windows 7 64-bit and I get this error when trying to register using regsvr32 in both system32 and syswow64 folder.
The module "LGVS985_20140620_LGFLASHv160.dll" was loaded but the entry-point DllRegisterServer was not found. Make sure that "LGVS985_20140620_LGFLASHv160.dll" is a valid DLL or OCX file and then try again.
Click to expand...
Click to collapse
Sorry but I am also using Windows 7 64bit everything works fine here

Anik49 said:
Sorry but I am also using Windows 7 64bit everything works fine here
Click to expand...
Click to collapse
You were able to install the DLL posted in this thread using regsvr32?

dannyx4112 said:
You were able to install the DLL posted in this thread using regsvr32?
Click to expand...
Click to collapse
Yes I just install it....click and it install.

Anik49 said:
Yes I just install it....click and it install.
Click to expand...
Click to collapse
Ok I think i solved that problem.. But now when I try to download the KDZ using my IMEI from the link you gave it says:
Model:LGVS985WK
Suffix:AVRSWH1
Latest Firmware:
No Firmware Found Yet
To Request Firmware:
Copy above information and send us in this Contact Form
Can I use any KDZ for VS985?

dannyx4112 said:
Ok I think i solved that problem.. But now when I try to download the KDZ using my IMEI from the link you gave it says:
Model:LGVS985WK
Suffix:AVRSWH1
Latest Firmware:
No Firmware Found Yet
To Request Firmware:
Copy above information and send us in this Contact Form
Can I use any KDZ for VS985?
Click to expand...
Click to collapse
Verizon firmware http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/Verizon+VS985/

Anik49 said:
Verizon firmware http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/Verizon+VS985/
Click to expand...
Click to collapse
Thank you for your help, much appreciated. I have been running into this problem when trying to refurbish 47a or 48a. When LGUP is waiting 120 seconds for restart (about 80% in LGUP), my phone just keep restarting without completing the installation. It keeps bootlooping and then LGUP keeps waiting for my phone to restart. LGUP will say 100% but my phone is just bootlooping constantly.

LGUP shows unknown model ????

Hi Guys i have LG G3 D851 ..i am currently on MM i want to downgrade to lollipop so i downloaded the kdz file V20e but the problem is that LGUP cannot detect my G3 shows the device as unknown model but correctly shows the comports i even tried using LGFlash tool used seems that i cannot downgrade shows error and stops so i wanna know is there any way to fix this unknown model in LGUP ...

Guess no one wants to help here ?? To anyone else who has this issue u may need to change the buildprop file and ur phone must be rooted it still doesnt shows as unknown in LGUP but since i have rooted my phone n bought a new battery and installed xposed and im having a good battery life i still want to know why it aint showing up in LGUP

jinderation said:
Guess no one wants to help here ?? To anyone else who has this issue u may need to change the buildprop file and ur phone must be rooted it still doesnt shows as unknown in LGUP but since i have rooted my phone n bought a new battery and installed xposed and im having a good battery life i still want to know why it aint showing up in LGUP
Click to expand...
Click to collapse
Did you ever resolve this problem? The same thing is happening to me.

dant3ch said:
Did you ever resolve this problem? The same thing is happening to me.
Click to expand...
Click to collapse
i think D851 doesnt support LGUPdirect mthod thats what i figure but u can go back via tot method to lollipop or kitkat...im still using MM with custom rom

jinderation said:
i think D851 doesnt support LGUPdirect mthod thats what i figure but u can go back via tot method to lollipop or kitkat...im still using MM with custom rom
Click to expand...
Click to collapse
Try this dll it works..
https://drive.google.com/file/d/0B0VrTZddvLF7b3Q1b1BlQ2w0clE/view

Salik Iqbal said:
Try this dll it works..
https://drive.google.com/file/d/0B0VrTZddvLF7b3Q1b1BlQ2w0clE/view
Click to expand...
Click to collapse
is there somehow can u install this dll ? i dont somehow know it ?

jinderation said:
is there somehow can u install this dll ? i dont somehow know it ?
Click to expand...
Click to collapse
Dont install it.. use it with flashtool as dll and tot for ur model.. old flashtool way

Salik Iqbal said:
Dont install it.. use it with flashtool as dll and tot for ur model.. old flashtool way
Click to expand...
Click to collapse
i cant seem to flash via lgflashtool 2014 cuz it needs kdz n in TWRP u need .zip file...what other flashing method is available?

jinderation said:
i cant seem to flash via lgflashtool 2014 cuz it needs kdz n in TWRP u need .zip file...what other flashing method is available?
Click to expand...
Click to collapse
The only flashing method that has ever worked for me when my phone was bricked along with Corrupted recovery is the .TOT method. And that I'm afraid is the one from where you have to start all over from Out of the box experience with 4.4 Kitkat. If the LGFlashTool2014 does not work for you, I recommend the LGFlashtoolv1.8.1 + the crack. It will not ask you for the KDZ and should allow you to downgrade without any hassle.
There are 2 things you will need:
LGD851AT-01-V10c.zip & LGFLASHv160.dll
This will point you in the right direction. Just scroll down to the text where it says "2014 TOT Method (Old/Outdated)"
http://forum.xda-developers.com/showthread.php?t=2785089
Good luck

jinderation said:
Guess no one wants to help here ?? To anyone else who has this issue u may need to change the buildprop file and ur phone must be rooted it still doesnt shows as unknown in LGUP but since i have rooted my phone n bought a new battery and installed xposed and im having a good battery life i still want to know why it aint showing up in LGUP
Click to expand...
Click to collapse
its dll you must download this one LGUP_8974.dll " LGUP_8974_8084_DLL_Ver_0_3_17_6.msi "

Hi guys,I'm a Chinese ,I found this dll in Chinese forum ,but it's difficult to download,thank you !! and I'll take this

Solution to LGUP LG G3 unknown
While an old thread, it'll be found in searches. For anybody who gets "UNKNOWN" device with LGUP for the LG G3, I found that LGUP for the G3 is often distributed with the wrong DLL file. See the details here, post #11.
HTH

LGUP worked with my LG G3 D851 when I used it as in this tutorial:
LG G3 LineageOS Tutorial - Linus Tech Tips

LG D850 partition.txt? Need it for BoardDiag.

Hey, guys.
I was wondering if you know how to get the partition.txt file from an AT&T LG G3 Stock ROM .tot through LG Firmware Extract? I recently bricked my phone is this is the second to last step, but the one I'm having the most trouble with. I have the .tot file as well as the .dll file, but I can't seem to find partition.txt from either of them.
Putting the .dll file in the program just gave me an error, the .tot file basically extracts all the files EXCEPT the one I'm looking for. I tried doing it in BoardDiag as well; it came up with the same results. I'll try to redownload the stock firmware and see if it was incomplete, but I don't think that's likely.
Anyone have any clues?

Dragour1041 said:
Hey, guys.
I was wondering if you know how to get the partition.txt file from an AT&T LG G3 Stock ROM .tot through LG Firmware Extract? I recently bricked my phone is this is the second to last step, but the one I'm having the most trouble with. I have the .tot file as well as the .dll file, but I can't seem to find partition.txt from either of them.
Putting the .dll file in the program just gave me an error, the .tot file basically extracts all the files EXCEPT the one I'm looking for. I tried doing it in BoardDiag as well; it came up with the same results. I'll try to redownload the stock firmware and see if it was incomplete, but I don't think that's likely.
Anyone have any clues?
Click to expand...
Click to collapse
I'm interested too.. I can't find the partitions.txt file in LG H340n .kdz firmware...

werthad said:
I'm interested too.. I can't find the partitions.txt file in LG H340n .kdz firmware...
Click to expand...
Click to collapse
I don't think it is in the firmware.

iloveoreos said:
I don't think it is in the firmware.
Click to expand...
Click to collapse
It is available in stock firmware.But you also need boarddiag to create a partition.txt or if you have d850 32gb att device then also i can provide you the partition.txt file.

bilawal.sarfraz.1 said:
It is available in stock firmware.But you also need boarddiag to create a partition.txt or if you have d850 32gb att device then also i can provide you the partition.txt file.
Click to expand...
Click to collapse
Ok good. Could you send it to me even though mine is a d852? My phone isn't bricked, but I want to look at it.

iloveoreos said:
Ok good. Could you send it to me even though mine is a d852? My phone isn't bricked, but I want to look at it.
Click to expand...
Click to collapse
Brother its not a childs play,tell me the purpose and i will tell you the full method to create partition file.

bilawal.sarfraz.1 said:
Brother its not a childs play,tell me the purpose and i will tell you the full method to create partition file.
Click to expand...
Click to collapse
I just wanted to look through it for curiosity sake. But if it isn't too complicated, could you tell me how to make one? I might someday brick mine lol.

iloveoreos said:
I just wanted to look through it for curiosity sake. But if it isn't too complicated, could you tell me how to make one? I might someday brick mine lol.
Click to expand...
Click to collapse
Ok.Download the .tot file of your stock rom.Kdz not work thats why you neef the .tot file then open boarddiag.At the end of boarddiag,you need to select the bin (in which select the downloaded .tot) and then select the output destination folder where you want to get partition file. Note : During process boarddiag will stuck and the pc shows not responding on boarddiag,dont worry keep it continue until the boarddiag says that the extraction is completed.
If i really help you then you can give me a like ☺☺.