I ask for help. I tried to stitch an insertion from D855 on the F400K, having changed build.prop, Flashtool stopped with a mistake [ERROR]: Partition Change system Partition (Phone! =tot). I stitched KDZ D855 further. System not start. Boot-loop. Flashtool refuses to stitch, model is different. What to do how to return an initial insertion from F400K?
Just so I understand did you try to flash an EU handset with a Korean one?
daleski75 said:
Just so I understand did you try to flash an EU handset with a Korean one?
Click to expand...
Click to collapse
Yes. I buy korea model F400K and change file build.prop from D855, and flash with Flashtool
Try this guide.
http://forum.xda-developers.com/showthread.php?t=2772199
daleski75 said:
Try this guide.
http://forum.xda-developers.com/showthread.php?t=2772199
Click to expand...
Click to collapse
This method doesn't work, the model already is defined by D855RE
P.S. The problem was solved by dll editing that Flashtool didn't stop at mistakes. DLL were changed by the person maloma from 4PDA forum.
DenisDA said:
This method doesn't work, the model already is defined by D855RE
P.S. The problem was solved by dll editing that Flashtool didn't stop at mistakes. DLL were changed by the person maloma from 4PDA forum.
Click to expand...
Click to collapse
Could you post the solution ? I also encounter the same question . Thanks:crying:
Wait let me get this right.
Which model did you buy.
Which model firmware did you flash?
Changing build.prop doesn't alter the device, the Korean models have different radio's and different partitions flashing the wrong firmware is highly likely to cause an irrecoverable brick.
serect said:
Could you post the solution ? I also encounter the same question . Thanks:crying:
Click to expand...
Click to collapse
If you are flash to D855 and download mode is possible, flash with Flashtool back with this dll gfile.ru/abRXC and the insertion of TOT, after flash I recommend strongly to make repeated flash with native dll
Lennyuk said:
Wait let me get this right.
Which model did you buy.
Which model firmware did you flash?
Changing build.prop doesn't alter the device, the Korean models have different radio's and different partitions flashing the wrong firmware is highly likely to cause an irrecoverable brick.
Click to expand...
Click to collapse
You're an RD so im sure you know, ANy idea how to get the d855 to show the LTE bands in the service menu/secret menu?
People have bought it to use in the states on AT&T which uses 700mhz spectrum but cant get it to work and cant change what bands to use since they're not shown at all in the service menu.
DenisDA said:
If you are flash to D855 and download mode is possible, flash with Flashtool back with this dll gfile.ru/abRXC and the insertion of TOT, after flash I recommend strongly to make repeated flash with native dll
Click to expand...
Click to collapse
So it is impossible to flash F400K to D855 , right ?:crying:
serect said:
So it is impossible to flash F400K to D855 , right ?:crying:
Click to expand...
Click to collapse
They have different radios.
Will probably brick it.
serect said:
So it is impossible to flash F400K to D855 , right ?:crying:
Click to expand...
Click to collapse
Yes, wait custom firmware
DenisDA said:
If you are flash to D855 and download mode is possible, flash with Flashtool back with this dll gfile.ru/abRXC and the insertion of TOT, after flash I recommend strongly to make repeated flash with native dll
Click to expand...
Click to collapse
You are a legend mate! Been searching this for days now! My F400K that thinks it's a F400L has now been fully reflashed back to F400K10G build.
d855re
DenisDA said:
This method doesn't work, the model already is defined by D855RE
P.S. The problem was solved by dll editing that Flashtool didn't stop at mistakes. DLL were changed by the person maloma from 4PDA forum.
Click to expand...
Click to collapse
Hy , i have a lg g3 f400l 32go but in lg flashtool model is d855re, i try to flash with f400l and d855 tot and dell files but lg flashtools tels model device is diferent , check phone or dll , plese help me if you can ....
DenisDA said:
Yes, wait custom firmware
Click to expand...
Click to collapse
please post modified DLL to help others out. that link does not work
daddioj said:
please post modified DLL to help others out. that link does not work
Click to expand...
Click to collapse
I agree that would help out a lot of people.
daleski75 said:
I agree that would help out a lot of people.
Click to expand...
Click to collapse
My rate impossible post normal link.
drive.google.com/file/d/0B-H4G_jDRCJwRVhBcFdGVzFjTHc/edit?usp=sharing
DenisDA said:
Yes, wait custom firmware
Click to expand...
Click to collapse
Can you go to recovery ?! If you can, we can restore build.prop
hoangnova said:
Can you go to recovery ?! If you can, we can restore build.prop
Click to expand...
Click to collapse
I already restored long ago everything, thanks to this magic dll
DenisDA said:
I already restored long ago everything, thanks to this magic dll
Click to expand...
Click to collapse
with this dll , flashtool stop at 94% , i can't belive this ....
waiting for reset 40sec
mini os boot check ...
FAIL!!! Factory_BootComplete
Related
Hi friends,
search for whole universe for the Indian tot file all i can find is only KDZ
now i need either the tot or a way to convert kdz to tot
i come across a software that can extract the kdz but nothing that can make a tot.
can someone over here help me out? i'm left with an expensive paper weight over here please help me out to convert it into a fine working mobile.
waiting.. any help...
jacktackle said:
Hi friends,
search for whole universe for the Indian tot file all i can find is only KDZ
now i need either the tot or a way to convert kdz to tot
i come across a software that can extract the kdz but nothing that can make a tot.
can someone over here help me out? i'm left with an expensive paper weight over here please help me out to convert it into a fine working mobile.
waiting.. any help...
Click to expand...
Click to collapse
Why do you need TOT so bad?
If you are Flashing, then it's easier (and safer) to Flash KDZ than TOT
573v3 said:
Why do you need TOT so bad?
If you are Flashing, then it's easier (and safer) to Flash KDZ than TOT
Click to expand...
Click to collapse
this mobile is brick n in qualcomm HS_USB QDLoader 9008 mode
only thing that can resurect this mobile is a original tot file. kdz is for only if you can get to proper download mode which i can't
jacktackle said:
this mobile is brick n in qualcomm HS_USB QDLoader 9008 mode
only thing that can resurect this mobile is a original tot file. kdz is for only if you can get to proper download mode which i can't
Click to expand...
Click to collapse
Ah! now you have explained a little more.......
Here is EURO .TOT for D955 . Use this, get your phone up and running, Flash your Indian .KDZ
http://forum.xda-developers.com/showthread.php?t=2870857
573v3 said:
Ah! now you have explained a little more.......
Here is EURO .TOT for D955 . Use this, get your phone up and running, Flash your Indian .KDZ
http://forum.xda-developers.com/showthread.php?t=2870857
Click to expand...
Click to collapse
i tried the euro already its 10e i need 10i specificaly as 10e fails saying model miss match thanks any ways
God i made a silly mistake instead of writing D855 it's written D955. I'm talking about G3 16gb
jacktackle said:
i tried the euro already its 10e i need 10i specificaly as 10e fails saying model miss match thanks any ways
God i made a silly mistake instead of writing D855 it's written D955. I'm talking about G3 16gb[/QUOTE
That's probably why you are getting model mismatch (D955/D855).
There should be no mismatch of version, as long as model is right.
Try one of these from @hyelton
http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/D855+TOTs/
Click to expand...
Click to collapse
jacktackle said:
i tried the euro already its 10e i need 10i specificaly as 10e fails saying model miss match thanks any ways
God i made a silly mistake instead of writing D855 it's written D955. I'm talking about G3 16gb
Click to expand...
Click to collapse
If you have to use a tot use any D855 16gb tot from my link above ^^. Using a different version /software version doesn't result in model mismatch.
Also what did you mean you couldn't get kdz to work because you don't have download mode? You cannot flash any stock firmware WITHOUT download mode. Your phone must be in download mode to flash.
And assuming your in download mode due to the error you had above.
Sent from my iPhone using Tapatalk
hyelton said:
If you have to use a tot use any D855 16gb tot from my link above ^^. Using a different version /software version doesn't result in model mismatch.
Also what did you mean you couldn't get kdz to work because you don't have download mode? You cannot flash any stock firmware WITHOUT download mode. Your phone must be in download mode to flash.
And assuming your in download mode due to the error you had above.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
but i read some forums that if i'm in qualcomm brick mode, i can flash from flash tools with tot file n a dll file. only if i have the right firmware. but i'm not sure how far i'm right.
i guess this G3 is a dead meat or may be only jtag can bring it back to life.
jacktackle said:
but i read some forums that if i'm in qualcomm brick mode, i can flash from flash tools with tot file n a dll file. only if i have the right firmware. but i'm not sure how far i'm right.
i guess this G3 is a dead meat or may be only jtag can bring it back to life.
Click to expand...
Click to collapse
Did you try a kdz? And or did you try the correct tot then?
Sent from my iPhone using Tapatalk
hyelton said:
Did you try a kdz? And or did you try the correct tot then?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
yes bro i've tried all flashers n all types the problem is my phone is in dead screen nothing can be seen but when you connect to computer its in qualcomm fastboot mode. i guess that needs to be fixed first mentioned in this forum.
http://lgunbrick.blogspot.com/2015/03/how-to-fix-fastboot-mode-on-lg-g-g2-g3.html
this guide works with 9006 brick but i'm in 9008 brick trying to contact the guy but no reply
jacktackle said:
yes bro i've tried all flashers n all types the problem is my phone is in dead screen nothing can be seen but when you connect to computer its in qualcomm fastboot mode. i guess that needs to be fixed first mentioned in this forum.
http://lgunbrick.blogspot.com/2015/03/how-to-fix-fastboot-mode-on-lg-g-g2-g3.html
this guide works with 9006 brick but i'm in 9008 brick trying to contact the guy but no reply
Click to expand...
Click to collapse
Well did you give it a try anyway?? It's not going to hurt.
Sent from my iPhone using Tapatalk
hyelton said:
Well did you give it a try anyway?? It's not going to hurt.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
in contact with aftab already but delay in getting reply's on xda
hi jacktacle
Did you find D85510i tot file?
I need this file.
first of all i want to say that i already seen similiar thread like mine but it is all about using tot method but my thread is all about lg up .
First of all it"s not my work,full credit goes to autoprime. On autoprime thread in the first page i dont see the updated dll file,he gives the update few page later. So i think people face problem during downgrade like me, So thats why i am opening this thread but if moderator thinks its not nedded, please delete this thread.
so here are the Steps
download kdz for your phone from here http://lg-firmware-rom.com/
install dll file from attachement
installing lg up and how to connect your phone...follow the instruction from here http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
make sure you install dll file before lg up.
Open LGUP on your computer, click on upgrade and point it towards your LP KDZ. Close LGUP and re-open LGUP and select refubrish.. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. Now you are done and hope it helps people, who are face trouble during downgrade like me also don't forget to hit thanks if it's helpful to you.
OMG I LOVE YOU... I've tried everything, almost lost all hope, thank you thank you thank you! Works like a charm!
Vuka22 said:
OMG I LOVE YOU... I've tried everything, almost lost all hope, thank you thank you thank you! Works like a charm!
Click to expand...
Click to collapse
thanks
Sorry this tool working on G3 F400K?
Thanks bro. Good job.
KHUN VEASNA said:
Sorry this tool working on G3 F400K?
Click to expand...
Click to collapse
I think it should be work because both have same chipset 8974 but not sure it will work or not.. .because the dll for d855...you can try use your kdz and the given .dll .....but still i am saying i am not sure.
Anik49 said:
I think it should be work because both have same chipset 8974 but not sure it will work or not.. .because the dll for d855...you can try use your kdz and the given .dll .....but still i am saying i am not sure.
Click to expand...
Click to collapse
Yes it worked for my f400k. Thanks you so much.
Im Stuck in MM after the update to 6.0 Will any of these firmwares work for the D 850 ? thanks
louvass said:
Im Stuck in MM after the update to 6.0 Will any of these firmwares work for the D 850 ? thanks
Click to expand...
Click to collapse
You have to use lg d850 firmware.
Anik49 said:
You have to use lg d850 firmware.
Click to expand...
Click to collapse
yea i followed the link from the OP and put in my imei and it said no firmware avail. so where do we get this? for At&t d850?
killerskincanoe said:
yea i followed the link from the OP and put in my imei and it said no firmware avail. so where do we get this? for At&t d850?
Click to expand...
Click to collapse
http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/AT&T+D850/
Here i think you will find d850 stock tot file...
Anik49 said:
first of all i want to say that i already seen similiar thread like mine but it is all about using tot method but my thread is all about lg up .
First of all it"s not my work,full credit goes to autoprime. On autoprime thread in the first page i dont see the updated dll file,he gives the update few page later. So i think people face problem during downgrade like me, So thats why i am opening this thread but if moderator thinks its not nedded, please delete this thread.
so here are the Steps
download kdz for your phone from here http://lg-firmware-rom.com/
install dll file from attachement
installing lg up and how to connect your phone...follow the instruction from here http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
make sure you install dll file before lg up.
Open LGUP on your computer, click on upgrade and point it towards your LP KDZ. Close LGUP and re-open LGUP and select refubrish.. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. Now you are done and hope it helps people, who are face trouble during downgrade like me also don't forget to hit thanks if it's helpful to you.
Click to expand...
Click to collapse
Works like a charm for me thanks alot.. mine was LG G3 F460L korean variant. from MM to LP im back to Go, i decided to go for LP due to no proper root in MM.
Anik49 said:
first of all i want to say that i already seen similiar thread like mine but it is all about using tot method but my thread is all about lg up .
First of all it"s not my work,full credit goes to autoprime. On autoprime thread in the first page i dont see the updated dll file,he gives the update few page later. So i think people face problem during downgrade like me, So thats why i am opening this thread but if moderator thinks its not nedded, please delete this thread.
so here are the Steps
download kdz for your phone from here http://lg-firmware-rom.com/
install dll file from attachement
installing lg up and how to connect your phone...follow the instruction from here http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
make sure you install dll file before lg up.
Open LGUP on your computer, click on upgrade and point it towards your LP KDZ. Close LGUP and re-open LGUP and select refubrish.. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. Now you are done and hope it helps people, who are face trouble during downgrade like me also don't forget to hit thanks if it's helpful to you.
Click to expand...
Click to collapse
OMG! you're the man! All this time, i've been installing the LGUP before the dll. no one said it's the other way round. Thanks a ton!
How do I register the DLL file? I am running Windows 7 64-bit and I get this error when trying to register using regsvr32 in both system32 and syswow64 folder.
The module "LGVS985_20140620_LGFLASHv160.dll" was loaded but the entry-point DllRegisterServer was not found. Make sure that "LGVS985_20140620_LGFLASHv160.dll" is a valid DLL or OCX file and then try again.
dannyx4112 said:
How do I register the DLL file? I am running Windows 7 64-bit and I get this error when trying to register using regsvr32 in both system32 and syswow64 folder.
The module "LGVS985_20140620_LGFLASHv160.dll" was loaded but the entry-point DllRegisterServer was not found. Make sure that "LGVS985_20140620_LGFLASHv160.dll" is a valid DLL or OCX file and then try again.
Click to expand...
Click to collapse
Sorry but I am also using Windows 7 64bit everything works fine here
Anik49 said:
Sorry but I am also using Windows 7 64bit everything works fine here
Click to expand...
Click to collapse
You were able to install the DLL posted in this thread using regsvr32?
dannyx4112 said:
You were able to install the DLL posted in this thread using regsvr32?
Click to expand...
Click to collapse
Yes I just install it....click and it install.
Anik49 said:
Yes I just install it....click and it install.
Click to expand...
Click to collapse
Ok I think i solved that problem.. But now when I try to download the KDZ using my IMEI from the link you gave it says:
Model:LGVS985WK
Suffix:AVRSWH1
Latest Firmware:
No Firmware Found Yet
To Request Firmware:
Copy above information and send us in this Contact Form
Can I use any KDZ for VS985?
dannyx4112 said:
Ok I think i solved that problem.. But now when I try to download the KDZ using my IMEI from the link you gave it says:
Model:LGVS985WK
Suffix:AVRSWH1
Latest Firmware:
No Firmware Found Yet
To Request Firmware:
Copy above information and send us in this Contact Form
Can I use any KDZ for VS985?
Click to expand...
Click to collapse
Verizon firmware http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/Verizon+VS985/
Anik49 said:
Verizon firmware http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/Verizon+VS985/
Click to expand...
Click to collapse
Thank you for your help, much appreciated. I have been running into this problem when trying to refurbish 47a or 48a. When LGUP is waiting 120 seconds for restart (about 80% in LGUP), my phone just keep restarting without completing the installation. It keeps bootlooping and then LGUP keeps waiting for my phone to restart. LGUP will say 100% but my phone is just bootlooping constantly.
Hi Guys i have LG G3 D851 ..i am currently on MM i want to downgrade to lollipop so i downloaded the kdz file V20e but the problem is that LGUP cannot detect my G3 shows the device as unknown model but correctly shows the comports i even tried using LGFlash tool used seems that i cannot downgrade shows error and stops so i wanna know is there any way to fix this unknown model in LGUP ...
Guess no one wants to help here ?? To anyone else who has this issue u may need to change the buildprop file and ur phone must be rooted it still doesnt shows as unknown in LGUP but since i have rooted my phone n bought a new battery and installed xposed and im having a good battery life i still want to know why it aint showing up in LGUP
jinderation said:
Guess no one wants to help here ?? To anyone else who has this issue u may need to change the buildprop file and ur phone must be rooted it still doesnt shows as unknown in LGUP but since i have rooted my phone n bought a new battery and installed xposed and im having a good battery life i still want to know why it aint showing up in LGUP
Click to expand...
Click to collapse
Did you ever resolve this problem? The same thing is happening to me.
dant3ch said:
Did you ever resolve this problem? The same thing is happening to me.
Click to expand...
Click to collapse
i think D851 doesnt support LGUPdirect mthod thats what i figure but u can go back via tot method to lollipop or kitkat...im still using MM with custom rom
jinderation said:
i think D851 doesnt support LGUPdirect mthod thats what i figure but u can go back via tot method to lollipop or kitkat...im still using MM with custom rom
Click to expand...
Click to collapse
Try this dll it works..
https://drive.google.com/file/d/0B0VrTZddvLF7b3Q1b1BlQ2w0clE/view
Salik Iqbal said:
Try this dll it works..
https://drive.google.com/file/d/0B0VrTZddvLF7b3Q1b1BlQ2w0clE/view
Click to expand...
Click to collapse
is there somehow can u install this dll ? i dont somehow know it ?
jinderation said:
is there somehow can u install this dll ? i dont somehow know it ?
Click to expand...
Click to collapse
Dont install it.. use it with flashtool as dll and tot for ur model.. old flashtool way
Salik Iqbal said:
Dont install it.. use it with flashtool as dll and tot for ur model.. old flashtool way
Click to expand...
Click to collapse
i cant seem to flash via lgflashtool 2014 cuz it needs kdz n in TWRP u need .zip file...what other flashing method is available?
jinderation said:
i cant seem to flash via lgflashtool 2014 cuz it needs kdz n in TWRP u need .zip file...what other flashing method is available?
Click to expand...
Click to collapse
The only flashing method that has ever worked for me when my phone was bricked along with Corrupted recovery is the .TOT method. And that I'm afraid is the one from where you have to start all over from Out of the box experience with 4.4 Kitkat. If the LGFlashTool2014 does not work for you, I recommend the LGFlashtoolv1.8.1 + the crack. It will not ask you for the KDZ and should allow you to downgrade without any hassle.
There are 2 things you will need:
LGD851AT-01-V10c.zip & LGFLASHv160.dll
This will point you in the right direction. Just scroll down to the text where it says "2014 TOT Method (Old/Outdated)"
http://forum.xda-developers.com/showthread.php?t=2785089
Good luck
jinderation said:
Guess no one wants to help here ?? To anyone else who has this issue u may need to change the buildprop file and ur phone must be rooted it still doesnt shows as unknown in LGUP but since i have rooted my phone n bought a new battery and installed xposed and im having a good battery life i still want to know why it aint showing up in LGUP
Click to expand...
Click to collapse
its dll you must download this one LGUP_8974.dll " LGUP_8974_8084_DLL_Ver_0_3_17_6.msi "
Hi guys,I'm a Chinese ,I found this dll in Chinese forum ,but it's difficult to download,thank you !! and I'll take this
Solution to LGUP LG G3 unknown
While an old thread, it'll be found in searches. For anybody who gets "UNKNOWN" device with LGUP for the LG G3, I found that LGUP for the G3 is often distributed with the wrong DLL file. See the details here, post #11.
HTH
LGUP worked with my LG G3 D851 when I used it as in this tutorial:
LG G3 LineageOS Tutorial - Linus Tech Tips
can anyone share me the TOT file for LG G4 H811. i searched the entire internet and i cant find it.
Thanks
themaskofwraith said:
can anyone share me the TOT file for LG G4 H811. i searched the entire internet and i cant find it.
Thanks
Click to expand...
Click to collapse
what for,?
I rooted ny phone and changed build.props model name. And now i can't boot.
raptorddd said:
what for,?
Click to expand...
Click to collapse
hi canu pls share tot file. thanks
themaskofwraith said:
hi canu pls share tot file. thanks
Click to expand...
Click to collapse
therrs no tot file . only kdz
Can you use ADB / Fastboot? Do you have USB debugging enabled on your phone? Maybe you can pull the build.prop file, modify it and then push it back.
themaskofwraith said:
hi canu pls share tot file. thanks
Click to expand...
Click to collapse
can you enter download mode.??
press vol up then connect usb cable if yes.. then download your phone variant KDZ and flash it using LGUP program to go back to stock firmware and fix if not booting.
raptorddd said:
can you enter download mode.??
press vol up then connect usb cable if yes.. then download your phone variant KDZ and flash it using LGUP program to go back to stock firmware and fix if not booting.
Click to expand...
Click to collapse
LG UP doesnt recognize the device and says unknown model. bcz i changed model name in buildprops. And i cant change it back bcz i cant boot and stuck on LG Logo. Thats is the reason i wanna try tot file method
themaskofwraith said:
LG UP doesnt recognize the device and says unknown model. bcz i changed model name in buildprops. And i cant change it back bcz i cant boot and stuck on LG Logo. Thats is the reason i wanna try tot file method
Click to expand...
Click to collapse
as far as i know ther isnt any TOT.
He can't use LGUP because the model name is changed in build.prop.
raptorddd said:
as far as i know ther isnt any TOT.
Click to expand...
Click to collapse
Never thought u can brick a device by changing model name. Do u have any idea on how can i get this device to work .
themaskofwraith said:
Never thought u can brick a device by changing model name. Do u have any idea on how can i get this device to work .
Click to expand...
Click to collapse
not sure. i know ive seen post just like yours . that edited build.prop and phone no longer worked.. maybe do a search and try to read and see if they did found a solution for it.. sorry good luck.
raptorddd said:
not sure. i know ive seen post just like yours . that edited build.prop and phone no longer worked.. maybe do a search and try to read and see if they did found a solution for it.. sorry good luck.
Click to expand...
Click to collapse
Thanks i searched the internet i dont think there is a fix. need to take it to the LG Store i guess. i have Never seen a android phone that doesnt let you get into fastboot until LG G4.
themaskofwraith said:
Thanks i searched the internet i dont think there is a fix. need to take it to the LG Store i guess. i have Never seen a android phone that doesnt let you get into fastboot until LG G4.
Click to expand...
Click to collapse
search herei n the lg g4 forum.
LGUP TOT
my problem is that LGUP only reads TOT files so my KDZs don't work. I also have the LG h811 build.
DellyBoi18 said:
my problem is that LGUP only reads TOT files so my KDZs don't work. I also have the LG h811 build.
Click to expand...
Click to collapse
you got it the wrong way.. LGUP uses KDZ only.. you need to uncompress kdz zip file.. the open LGUP. select upgrade then on lower bar browse file .. close LGUP open it up and select refurbished and start...:good:
raptorddd said:
you got it the wrong way.. LGUP uses KDZ only.. you need to uncompress kdz zip file.. the open LGUP. select upgrade then on lower bar browse file .. close LGUP open it up and select refurbished and start...:good:
Click to expand...
Click to collapse
I always uncompress rar/zip files unless otherwise instructed. LGUP only seeks for TOT files in my experience unless I am using the wrong version or something
DellyBoi18 said:
I always uncompress rar/zip files unless otherwise instructed. LGUP only seeks for TOT files in my experience unless I am using the wrong version or something
Click to expand...
Click to collapse
as far as i know inky KDZ and flashtools uses TOT.
heres is
https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
raptorddd said:
as far as i know inky KDZ and flashtools uses TOT.
heres is
https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
Click to expand...
Click to collapse
I figured it out. I typed * in the "File Name:" text box and pressed enter and everything showed.
I recently bought a sprint LG G7 for a really good deal since it was cracked from the back corner. I've been searching around it seems no one is able to unlock it yet.
I was wondering, could I unlock it if I flash the LMG-710EM kdz file from the European unlocked G7?
If not anyone know about how long it takes until someone finds a way to unlock it? It's just sitting there.
I don't think you can flash it if it's still locked and it's still not sure if other versions of the firmware would work on other models since the "EM" one is the only ones that's unlockable ( as far as I know).
LameMonster82 said:
I don't think you can flash it if it's still locked and it's still not sure if other versions of the firmware would work on other models since the "EM" one is the only ones that's unlockable ( as far as I know).
Click to expand...
Click to collapse
I just have the phone sitting there. Waiting for someone to be able to unlock it.
I already tried to flash AWM (canadian rom) and EM rom. I am getting an error 0x81000302, Please use latest dll. Laf protocol version is not match. DLL = 115746384, device = 149688352.
So do you have any news about flashing or unlocking sprint LG G7?
akyl001 said:
I already tried to flash AWM (canadian rom) and EM rom. I am getting an error 0x81000302, Please use latest dll. Laf protocol version is not match. DLL = 115746384, device = 149688352.
So do you have any news about flashing or unlocking sprint LG G7?
Click to expand...
Click to collapse
Have you tried this method flash AWM (canadian rom) ? https://forum.xda-developers.com/showpost.php?p=76510671&postcount=168
There is a guy over at the LG v20 section that has cracked the laf partition stuff for that device, maybe he could possibly be of some assistance to this matter at least the knowledge behind it would be great. His name is @runningnak3d I do believe
Dicsan said:
Have you tried this method flash AWM (canadian rom) ? https://forum.xda-developers.com/showpost.php?p=76510671&postcount=168
Click to expand...
Click to collapse
Yes, I tried this method.
akyl001 said:
Yes, I tried this method.
Click to expand...
Click to collapse
At what step did you get the error? Please give a link to the KDZ file AWM (canadian rom)
Dicsan said:
At what step did you get the error? Please give a link to the KDZ file AWM (canadian rom)
Click to expand...
Click to collapse
After selecting dl repartition and flashing. You can find awm rom at lg firmwares com. Im not able to post a link now, sorry.
akyl001 said:
After selecting dl repartition and flashing. You can find awm rom at lg firmwares com. Im not able to post a link now, sorry.
Click to expand...
Click to collapse
You used lgup 1.15 and higher?
Has anyone managed to dump any partitions with lgup from any variant of the G7 thinq?
Dicsan said:
You used lgup 1.15 and higher?
Click to expand...
Click to collapse
I used lg up 1.14
akyl001 said:
I used lg up 1.14
Click to expand...
Click to collapse
I believe you need dll version v40 if it even exist you can try the v30 dll just replace the application and the model folder under your os/program files 86 /lg electronics /lgup something like that.
here is what i use for v30 and g6 it auto detects different model's try this and let us know if it works. https://drive.google.com/drive/folders/1prmqNlS_0pyElxnd9fTk32JVT5ym0dZ-?usp=sharing
awireless said:
I believe you need dll version v40 if it even exist you can try the v30 dll just replace the application and the model folder under your os/program files 86 /lg electronics /lgup something like that.
here is what i use for v30 and g6 it auto detects different model's try this and let us know if it works. https://drive.google.com/drive/folders/1prmqNlS_0pyElxnd9fTk32JVT5ym0dZ-?usp=sharing
Click to expand...
Click to collapse
I already used this dll, same error
https://techlector.com/install-non-branded-stock-firmware-on-lg-g7-thinq/
papoose515 said:
https://techlector.com/install-non-branded-stock-firmware-on-lg-g7-thinq/
Click to expand...
Click to collapse
Have you tried this? I dont think it will work because to cross flash the firmware you need to use dl partition if you use refurbish then it will throw an error?
Also in there comments someone said they got an error and phone brick so doesnt work for cross flashing only if its the same model number.
Is there any update on this?
Isn't it's possible to convert it on US version like it was done on V30?
jkjambo said:
Is there any update on this?
Isn't it's possible to convert it on US version like it was done on V30?
Click to expand...
Click to collapse
I think were just waiting on new modded DLL to be released
i found a way to unlock
can you plz explain how to unlock???