Related
hi guys,
please before you start judging on me and tell me to search the forums for the answer, please read the thread completely...
i have galaxy S III AT&T which lost the imei after rooting and cwm installation. the full details for the mobile is attached below.
i found many threads for solutions like QPST and Z3X activation box to inject the imei again but my major problem was in both procedures the will not be recognized from the tool due to the DIAG Mode is not enabled...
when i try to enable it with any code like *#9090# or *#0909# and also scripts nothing pop up to enable and according to one good guy here, this issue happen when the imei is lost..
please if any one could fix this issue...help us all because many people need it!!!
one more question which is disturbing me....most of the threads for rooting here does not mention the build number that is capable to apply to !!!! mentioning that i have another SIII at&t which was flashed by friend of mine to:
SGH-I747M stock rom
Build Number : JRO03L.I747MVLDLK4
Jelly Bean: 4.1.1
and i am afraid to flash it back to the stock rom of SGH-I747 ( PDA = I747UCDLK3 ) from sammobile and face the same destiny!!
Please help us guys with every thing i mentioned before...
Why don't you try to ODIN back to stock 4.1.2 and see what happens? No root and stock recovery. I've read where some have gotten their IMEI back by doing that. At the very least, it may cause the diag codes to work. You may need to reroot if you try to re inject it with one of the methods you mentioned.
beaverslayer said:
Why don't you try to ODIN back to stock 4.1.2 and see what happens? No root and stock recovery. I've read where some have gotten their IMEI back by doing that. At the very least, it may cause the diag codes to work. You may need to reroot if you try to re inject it with one of the methods you mentioned.
Click to expand...
Click to collapse
Can you share the ODIN file for 4.1.2? I only have 4.1.1
beaverslayer said:
Why don't you try to ODIN back to stock 4.1.2 and see what happens? No root and stock recovery. I've read where some have gotten their IMEI back by doing that. At the very least, it may cause the diag codes to work. You may need to reroot if you try to re inject it with one of the methods you mentioned.
Click to expand...
Click to collapse
i have no problem to do so....but does the stock rom for jelly bean 4.1.2 ( PDA = I747UCDLK3 ) has safe root??!!!
because most of the time when i try to auto cf root these devices nothing will happen...the device will restart for root and the red droid will show up, then it will stuck in ( cleaning up..... ) and wont go for rooting !!!
i think these devices has a locked bootloader!!!
beaverslayer said:
Why don't you try to ODIN back to stock 4.1.2 and see what happens? No root and stock recovery. I've read where some have gotten their IMEI back by doing that. At the very least, it may cause the diag codes to work. You may need to reroot if you try to re inject it with one of the methods you mentioned.
Click to expand...
Click to collapse
milan guy said:
i have no problem to do so....but does the stock rom for jelly bean 4.1.2 ( PDA = I747UCDLK3 ) has safe root??!!!
because most of the time when i try to auto cf root these devices nothing will happen...the device will restart for root and the red droid will show up, then it will stuck in ( cleaning up..... ) and wont go for rooting !!!
i think these devices has a locked bootloader!!!
Click to expand...
Click to collapse
i flashed the mobile to the stock rom i mentioned before but the diag still not show up!!!
please guys help me....
milan guy said:
i flashed the mobile to the stock rom i mentioned before but the diag still not show up!!!
please guys help me....
Click to expand...
Click to collapse
Yea, now I see there is no tar 4.1.2 to go back to. I think since that's the case, I would connect to Kies with a PC and do an emergency firmware recovery. Hopefully that will fix you up.
milan guy said:
hi guys,
please before you start judging on me and tell me to search the forums for the answer, please read the thread completely...
i have galaxy S III AT&T which lost the imei after rooting and cwm installation. the full details for the mobile is attached below.
i found many threads for solutions like QPST and Z3X activation box to inject the imei again but my major problem was in both procedures the will not be recognized from the tool due to the DIAG Mode is not enabled...
when i try to enable it with any code like *#9090# or *#0909# and also scripts nothing pop up to enable and according to one good guy here, this issue happen when the imei is lost..
please if any one could fix this issue...help us all because many people need it!!!
one more question which is disturbing me....most of the threads for rooting here does not mention the build number that is capable to apply to !!!! mentioning that i have another SIII at&t which was flashed by friend of mine to:
SGH-I747M stock rom
Build Number : JRO03L.I747MVLDLK4
Jelly Bean: 4.1.1
and i am afraid to flash it back to the stock rom of SGH-I747 ( PDA = I747UCDLK3 ) from sammobile and face the same destiny!!
Please help us guys with every thing i mentioned before...
Click to expand...
Click to collapse
Try this you can update to last firmware too.
Hey all,
So I've checked as much as I could to try and help myself before posting, so hoping some kinds souls can help out with my issue.
Got a samsung galaxy s3 SGH-T999V on Wind Mobile (Canada), android 4.3. My aim is to root the phone, then play with some roms later on, but at least get the rooting part done. I started with this hxxp://theunlockr.com/2012/07/23/how-to-root-and-install-clockworkmod-recovery-on-the-samsung-galaxy-s3-sgh-t999v-canadian-version guide, but the CMW didn't get installed when I went into recovery mode, just had the stock phone recovery options.
So then, went on to try pretty much the exact same procedure but with the root66_GLW_T999VVLALH2.7z..but Odin gave me the failed sbl2 error or something like that. Now i didn't have anything to backup so I didn't really care wiping the phone to factory default so I did so ( as well as the cache partition using the default android recovery menu.) But even still, no luck. When I tried again, it (Odin that is) just seemed to hang at the phase that stated "get PIT" or something like that (apologies I'm pulling this all from memory).. Had no real choice but to interrupt it restart, try again, back to the sbl2 error again. Doing this from a Win7x64 Ultimate OS (if that's relevant). I HATE the phone the way it is, I cannot stand the bloatware and I have a lot in mind to have fun with if I can ever get this bloody thing to root.
I think that's about all I can mention atm, did the usual stuff like try different usb ports, the phones USB cable 'seems' to be ok and working, I'm just beyond frustrated and finally at the part where I need to ask for help. Any and all help is deeply appreciated. Cheers
i also want help rooting my T999v version 4.1.2 cant seem to find a tutorial for rooting of version 4.1.2
ksec said:
Hey all,
So I've checked as much as I could to try and help myself before posting, so hoping some kinds souls can help out with my issue.
Got a samsung galaxy s3 SGH-T999V on Wind Mobile (Canada), android 4.3. My aim is to root the phone, then play with some roms later on, but at least get the rooting part done. I started with this hxxp://theunlockr.com/2012/07/23/how-to-root-and-install-clockworkmod-recovery-on-the-samsung-galaxy-s3-sgh-t999v-canadian-version guide, but the CMW didn't get installed when I went into recovery mode, just had the stock phone recovery options.
So then, went on to try pretty much the exact same procedure but with the root66_GLW_T999VVLALH2.7z..but Odin gave me the failed sbl2 error or something like that. Now i didn't have anything to backup so I didn't really care wiping the phone to factory default so I did so ( as well as the cache partition using the default android recovery menu.) But even still, no luck. When I tried again, it (Odin that is) just seemed to hang at the phase that stated "get PIT" or something like that (apologies I'm pulling this all from memory).. Had no real choice but to interrupt it restart, try again, back to the sbl2 error again. Doing this from a Win7x64 Ultimate OS (if that's relevant). I HATE the phone the way it is, I cannot stand the bloatware and I have a lot in mind to have fun with if I can ever get this bloody thing to root.
I think that's about all I can mention atm, did the usual stuff like try different usb ports, the phones USB cable 'seems' to be ok and working, I'm just beyond frustrated and finally at the part where I need to ask for help. Any and all help is deeply appreciated. Cheers
Click to expand...
Click to collapse
If you're on 4.3 stock you'll have to deal with this new thing they added called "Knox". Also you cannot downgrade to older versions of official firmware if you have updated to 4.3 stock. Root66 won't work for you unless there's a version of root66 firmware that is 4.3 (which there isn't). Here's a thread that should solve this problem for you: http://forum.xda-developers.com/showthread.php?t=2563955
dorian2kx said:
i also want help rooting my T999v version 4.1.2 cant seem to find a tutorial for rooting of version 4.1.2
Click to expand...
Click to collapse
Since you haven't updated to 4.3 yet, you don't have to deal with Knox, so use the root66 method here: http://forum.xda-developers.com/showthread.php?t=1949687
adslee said:
If you're on 4.3 stock you'll have to deal with this new thing they added called "Knox". Also you cannot downgrade to older versions of official firmware if you have updated to 4.3 stock. Root66 won't work for you unless there's a version of root66 firmware that is 4.3 (which there isn't). Here's a thread that should solve this problem for you: http://forum.xda-developers.com/showthread.php?t=2563955
Since you haven't updated to 4.3 yet, you don't have to deal with Knox, so use the root66 method here: http://forum.xda-developers.com/showthread.php?t=1949687
Click to expand...
Click to collapse
Hey adslee, thnks for the reply. I noticed the Knox app. Well then, that explains somethings. It did give me the impression that something was inhibiting the process. I'll check out the link you provided and let you know. Cheers
Thanks bro but can u please tell me how can i know what type my phone is, i mean is it a wind, videotron etc? Or it doesn't matter? Are they the same
dorian2kx said:
Thanks bro but can u please tell me how can i know what type my phone is, i mean is it a wind, videotron etc? Or it doesn't matter? Are they the same
Click to expand...
Click to collapse
Look Under the Battery on thw White Sticker. What do you have in there for a Model Name?
i have there a SGH-T999V
dorian2kx said:
i have there a SGH-T999V
Click to expand...
Click to collapse
Well then that's the Device you have. Anything said in Settings > Model is suspect. If I modify ro.device in Build.prop then My Galaxy S3 will appear instantly as S4 or Nexus 5. That does not mean it is one.
You always go by what's under the Battery and not by Settings > Model.
Hi guys,
My note 2 is in normally condition with stock 4.4.2 rom N7100XXUFND4.
Yesterday I wanna root it, then did with odin 3.09 + CF-Auto-Root-t03g-t03gxx-gtn7100 then + philz cwm6.
And I've lost imei, no efs and it doesnt recognize simcard :angel:
I got a efs.img file backup once, but since when my note2 still at 4.3 (or 4.1.2, cant remember exactly).
So, i've tried all menthols found here, as dr.ketan's aroma efs restore and his multi tools, install EFSFix.zip,... tried via PC and terminal emulator on my note2, but all no result (anyway, thank all devs.)
Im now downloading the stock rom back in order to try to flashing it to my device after unroot (but very slowly coz the international internet cable from Vietnam to outside was corrupted)
Just wanna ask you guys that does this work (flash stock rom can fix all or even when done flash my note2 still lost imei and just can use as a pda, not a pda phone)?
And if you have any flashing ideas, just let me now, I'll try.
Thank you.
alittlemad said:
Hi guys,
My note 2 is in normally condition with stock 4.4.2 rom N7100XXUFND4.
Yesterday I wanna root it, then did with odin 3.09 + CF-Auto-Root-t03g-t03gxx-gtn7100 then + philz cwm6.
And I've lost imei, no efs and it doesnt recognize simcard :angel:
I got a efs.img file backup once, but since when my note2 still at 4.3 (or 4.1.2, cant remember exactly).
So, i've tried all menthols found here, as dr.ketan's aroma efs restore and his multi tools, install EFSFix.zip,... tried via PC and terminal emulator on my note2, but all no result (anyway, thank all devs.)
Im now downloading the stock rom back in order to try to flashing it to my device after unroot (but very slowly coz the international internet cable from Vietnam to outside was corrupted)
Just wanna ask you guys that does this work (flash stock rom can fix all or even when done flash my note2 still lost imei and just can use as a pda, not a pda phone)?
And if you have any flashing ideas, just let me now, I'll try.
Thank you.
Click to expand...
Click to collapse
@ alittlemad,
First of all let me inform u this is not the section to post . U should try the Galaxy Note II Q&A, Help & Troubleshooting section.
Now to the problem at hand, if you have CWM, try flashing this Modem_N7100XXUFND3_CWM modem in cwm, I had a similar problem a couple of weeks ago when I downgraded from KK. Hope this works. It worked for me. I dont remember which thread i got it from. It is for 4.3 roms but works with 4.4 as well. All the best
P.S - I am uploading 2 modems. ND3 is for 4.3 but the next one, I think is for 4.4 - not sure. Search for these modems for further details.
Very good DonVito, my phone is back with the first file ND3 :good:.
If you have chance to come here, I will buy you a beer :highfive:.
Thanks a lot.
alittlemad said:
Very good DonVito, my phone is back with the first file ND3 :good:.
If you have chance to come here, I will buy you a beer :highfive:.
Thanks a lot.[/QUOT
Glad to help. Good luck and thanks for the offer
Also take back up of your efs with drketans back up utility and save it in our PC or cloud.
Click to expand...
Click to collapse
can you help me please
DonVito2020 said:
@ alittlemad,
First of all let me inform u this is not the section to post . U should try the Galaxy Note II Q&A, Help & Troubleshooting section.
Now to the problem at hand, if you have CWM, try flashing this Modem_N7100XXUFND3_CWM modem in cwm, I had a similar problem a couple of weeks ago when I downgraded from KK. Hope this works. It worked for me. I dont remember which thread i got it from. It is for 4.3 roms but works with 4.4 as well. All the best
P.S - I am uploading 2 modems. ND3 is for 4.3 but the next one, I think is for 4.4 - not sure. Search for these modems for further details.
Click to expand...
Click to collapse
i want your help please can you make video to make this to back phone work like it work before
and thank you
My situation is different from everyone's so i figured i'd share this with you all. I accidently turned off OEM Unlocker/USB Debugging in developer options and when i start my phone i'm completely locked out I CAN get into download mode but CANT flash anything at because the bootloader is locked. So im just writing this to let all you (Sprint Galaxy S6 G920P owners) not to do this unless u want a really expensive high end paperweight.... i can't flash anything because the bootloader is locked...... :crying::crying::crying:
Your not able to odin the OE7 tar?
Sent from my SM-G920P using XDA Free mobile app
wvebert said:
Your not able to odin the OE7 tar?
No in fact like i said my situation is different in a sense i'm locked out of the binary via the OEM switch being off im assuming....And the FRP will not let me modify ANYTHING lol crazy right...
btw can u please PM the proper locations of all the stock 5.11 firmware aka The BL, AP,CP & CSC stock files if they exist lol and all the full stock firmware. BTW anyone interested in this situation i attached pix of my screen after flashing Stock OE7
tar via Odin 3.10.6
Click to expand...
Click to collapse
I just had the same problem. I ended up re-flashing the stock OF7 tarball in Odin.
OF7 tallball
What is "OF7 tallball".
Where can i find that.
My phone is: G920T.
what is that, i want to know too
I am having the same Issue with the G920T, did anyone find a solution for it?
Having tbe same exact problem as the OP. Everthing I flash through ODIN fails. Even flashing stock 5.1.1 OF7 fails. I believe it's because I was on OGA so I have to wait until the tarball for that comes out I guess.
I had this problem yesterday. The way I fixed it was to flash the F8 bootloader, and then I could get the unroot rom to load.
Maybe a fluke, but that is what I did to fix mine.
Now I am unable to unlock it. I tried ChainFire CF-Auto-root and TWRP - both give the custom recovery is blocked. Any help on this is appreciated.
Thanks.
BigBirdie said:
I had this problem yesterday. The way I fixed it was to flash the F8 bootloader, and then I could get the unroot rom to load.
Maybe a fluke, but that is what I did to fix mine.
Now I am unable to unlock it. I tried ChainFire CF-Auto-root and TWRP - both give the custom recovery is blocked. Any help on this is appreciated.
Thanks.
Click to expand...
Click to collapse
when you got the custom binary block did you just plug it in and odin and flash it or did you managed to get it in download mode ?
was it just plugging it the same way it was showing the block .. thanks
I had same issue as first post. so I odin to the stock 5.1.1 firmware. Now when I reboot and it asks to verify my gmail account I set up when I got device. I did that but it takes my info then pops back up with the verify screen I know I'm entering the correct info because I try a wrong pw and it says check pw. Has anyone else had it basically got back to verify gmail account ? also if you look in google at linked devices it shows tha last activity of you signing in? I hope I don't have a $600 paperweight!
Looking for help
XXX01 said:
My situation is different from everyone's so i figured i'd share this with you all. I accidently turned off OEM Unlocker/USB Debugging in developer options and when i start my phone i'm completely locked out I CAN get into download mode but CANT flash anything at because the bootloader is locked. So im just writing this to let all you (Sprint Galaxy S6 G920P owners) not to do this unless u want a really expensive high end paperweight.... i can't flash anything because the bootloader is locked...... :crying::crying::crying:
Click to expand...
Click to collapse
----------
I have the same exact problem with my Sprint S6.
I have tried all possible stock Firmwares :
G920PVPU1AOCF
G920PVPU1AOE2
G920PVPU2BOF7
G920PVPU2BOH1
None of them workes. any idea, please keep update.
I got this same exact problem yesterday on my SM-G920P as well. Been up all night trying to figure it out, has anyone found a solution to this?
Just got mine working again Apparently the original firmware I had on my phone was "G920PVPU3BOI1" so I just downloaded and flashed that in Odin and it flashed without the "Custom Binary Blocked by FRP Lock" error I kept on usually getting. So for anybody with this problem, if you are unsure which firmware you originally had on your phone before the brick, just try to flash all the possible ones via Odin until one works
How to find proper firmware while bricked.
sebasvinti said:
Just got mine working again Apparently the original firmware I had on my phone was "G920PVPU3BOI1" so I just downloaded and flashed that in Odin and it flashed without the "Custom Binary Blocked by FRP Lock" error I kept on usually getting. So for anybody with this problem, if you are unsure which firmware you originally had on your phone before the brick, just try to flash all the possible ones via Odin until one works
Click to expand...
Click to collapse
You can just go into recovery mode and the proper version is put on the top of the screen.
---------- Post added at 08:59 PM ---------- Previous post was at 08:49 PM ----------
ameenz77 said:
I am having the same Issue with the G920T, did anyone find a solution for it?
Click to expand...
Click to collapse
I have the same issue too, have you tried to flash it with the stock firmware? If not then there may be another solution...
i am having the same problem .
on my samsung galaxy SM J500H/DS
it says *CUSTOM BINARY BLOCK BY FRP*
the problem was I disable developing option
where you can see the OEM and USB DEBUGGING. what can I do.?
i just got the g920p from sprint and i rootd it the turned off oem and im having the same problem I can get to download mode and recovery mode I just dont know what to do. Ive tryed a few different firmware and nun of them have worked. Any suggestions? Thanks
I just downloaded the newest update of line and installed it through odin and it booted up and asked me for my gmail and it worked just fine and it's still factory unlocked
howdy. Need help returning Verizon s8+ to stock after rooting and using a custom rom. every time I try to flash the stock firmware it says "FAIL! Model dismatch fail". also cant add user data in the ums slot, doesn't let me click on it. I've tried different sources but can't seem to get it to work. any help would be greatly appreciated.
now when i try to flash a custom rom it says "FAIL! (Auth)"
captaingohan said:
now when i try to flash a custom rom it says "FAIL! (Auth)"
Click to expand...
Click to collapse
Going through the same exact thing here. Trying to flash G950USQS2BQL1 that I got from Sammobile and first got the mismatch then I tried flashing with Prince Comsy's version of Odin and got the Fail auth. Now it's just stuck at SetupConnection. Let me know if you find any way that works please. I'll keep you updated if I figure it out.
I actually accidentally fixed it yesterday and successfully returned to stock. Even got Samsung pay and Android pay to work. I'll check out what files I used when I get home and let you know.
Try getting the firmware from updato instead of sammobile.
got mine working from sam mobile. https://dl.sammobile.com/M1FcRjxCIS...kRYXA../G955U1UES2AQL1_G955U1OYM2AQL1_VZW.zip
this link says user not logged in
Gents, can somebody help me? I've got a unlocked S8+ that I got from Samsung not knowing that key features I need like wifi calling wouldn't work. My current software is U1. So, how can I flash the stock Verizon firmware on my phone so that I get the wifi calling? I travel overseas a lot and need it. I'm tech/computer savy but am clueless on cell phones.. So any step by step instructions would be most appreciated.
Thanks!
nd3 said:
Gents, can somebody help me? I've got a unlocked S8+ that I got from Samsung not knowing that key features I need like wifi calling wouldn't work. My current software is U1. So, how can I flash the stock Verizon firmware on my phone so that I get the wifi calling? I travel overseas a lot and need it. I'm tech/computer savy but am clueless on cell phones.. So any step by step instructions would be most appreciated.
Thanks!
Click to expand...
Click to collapse
You need to flash the stock verizon files in ODIN. You can search XDA or Google it. There are threads that explain it. Backup your phone, download the files - might take a while, unzip, and flash. It will wipe your phone.