Hi guys,
My note 2 is in normally condition with stock 4.4.2 rom N7100XXUFND4.
Yesterday I wanna root it, then did with odin 3.09 + CF-Auto-Root-t03g-t03gxx-gtn7100 then + philz cwm6.
And I've lost imei, no efs and it doesnt recognize simcard :angel:
I got a efs.img file backup once, but since when my note2 still at 4.3 (or 4.1.2, cant remember exactly).
So, i've tried all menthols found here, as dr.ketan's aroma efs restore and his multi tools, install EFSFix.zip,... tried via PC and terminal emulator on my note2, but all no result (anyway, thank all devs.)
Im now downloading the stock rom back in order to try to flashing it to my device after unroot (but very slowly coz the international internet cable from Vietnam to outside was corrupted)
Just wanna ask you guys that does this work (flash stock rom can fix all or even when done flash my note2 still lost imei and just can use as a pda, not a pda phone)?
And if you have any flashing ideas, just let me now, I'll try.
Thank you.
alittlemad said:
Hi guys,
My note 2 is in normally condition with stock 4.4.2 rom N7100XXUFND4.
Yesterday I wanna root it, then did with odin 3.09 + CF-Auto-Root-t03g-t03gxx-gtn7100 then + philz cwm6.
And I've lost imei, no efs and it doesnt recognize simcard :angel:
I got a efs.img file backup once, but since when my note2 still at 4.3 (or 4.1.2, cant remember exactly).
So, i've tried all menthols found here, as dr.ketan's aroma efs restore and his multi tools, install EFSFix.zip,... tried via PC and terminal emulator on my note2, but all no result (anyway, thank all devs.)
Im now downloading the stock rom back in order to try to flashing it to my device after unroot (but very slowly coz the international internet cable from Vietnam to outside was corrupted)
Just wanna ask you guys that does this work (flash stock rom can fix all or even when done flash my note2 still lost imei and just can use as a pda, not a pda phone)?
And if you have any flashing ideas, just let me now, I'll try.
Thank you.
Click to expand...
Click to collapse
@ alittlemad,
First of all let me inform u this is not the section to post . U should try the Galaxy Note II Q&A, Help & Troubleshooting section.
Now to the problem at hand, if you have CWM, try flashing this Modem_N7100XXUFND3_CWM modem in cwm, I had a similar problem a couple of weeks ago when I downgraded from KK. Hope this works. It worked for me. I dont remember which thread i got it from. It is for 4.3 roms but works with 4.4 as well. All the best
P.S - I am uploading 2 modems. ND3 is for 4.3 but the next one, I think is for 4.4 - not sure. Search for these modems for further details.
Very good DonVito, my phone is back with the first file ND3 :good:.
If you have chance to come here, I will buy you a beer :highfive:.
Thanks a lot.
alittlemad said:
Very good DonVito, my phone is back with the first file ND3 :good:.
If you have chance to come here, I will buy you a beer :highfive:.
Thanks a lot.[/QUOT
Glad to help. Good luck and thanks for the offer
Also take back up of your efs with drketans back up utility and save it in our PC or cloud.
Click to expand...
Click to collapse
can you help me please
DonVito2020 said:
@ alittlemad,
First of all let me inform u this is not the section to post . U should try the Galaxy Note II Q&A, Help & Troubleshooting section.
Now to the problem at hand, if you have CWM, try flashing this Modem_N7100XXUFND3_CWM modem in cwm, I had a similar problem a couple of weeks ago when I downgraded from KK. Hope this works. It worked for me. I dont remember which thread i got it from. It is for 4.3 roms but works with 4.4 as well. All the best
P.S - I am uploading 2 modems. ND3 is for 4.3 but the next one, I think is for 4.4 - not sure. Search for these modems for further details.
Click to expand...
Click to collapse
i want your help please can you make video to make this to back phone work like it work before
and thank you
Related
hi everyone.. i just bought Samsung Galaxy Note II 4G on first december, from Optus Australia..
and last night i try to root, and flashing Omega v7.3 Rom from N7100, it is work well but the IMEI and Signal is gone, and also the S-pen is not working..
and i try use N7105 custom rom http://forum.xda-developers.com/showthread.php?t=1985200
and also my signal is still not detected, but my S-Pen is working back..
somebody please help me...
how to fix my signal problem
benatis said:
and flashing Omega v7.3 Rom from N7100
Click to expand...
Click to collapse
Why in first case did you flash a ROm which isn't intended to be for your device?
Well you killed your EFS partition (bricked)
I hope you mad a EFS backup BEFORE you flashed. So you can restore it and all will be fine.
You could try the Stock Firmware via Mobile Odin if it fixes your EFS problem. No Guarantee here, sometimes it dsoes work and sometimes not.
Good luck to you
Higgins12 said:
Why in first case did you flash a ROm which isn't intended to be for your device?
Well you killed your EFS partition (bricked)
I hope you mad a EFS backup BEFORE you flashed. So you can restore it and all will be fine.
You could try the Stock Firmware via Mobile Odin if it fixes your EFS problem. No Guarantee here, sometimes it dsoes work and sometimes not.
Good luck to you
Click to expand...
Click to collapse
hmm.. i never used Samsung device before.. this is my first Samsung device i have ever..
different with my old HTC devices..
i will try ODIN now... use Stock ROM....
-----
and also, i have tried to wipe data from CWM, why my Note2 device still can boot?
i mean, like not wiped the data completely
benatis said:
hmm.. i never used Samsung deviced before.. this is my first Samsung device i have ever..
different with my HTC devices
Click to expand...
Click to collapse
I believe the reason you are experiencing this issue is because this new firmware you flashed doesn't contain a custom radio and the n7100 firmware did. You will need to find a n7105 radio, flash that through CWM or TWRP and you should be back in business mate.
chrisaw said:
I believe the reason you are experiencing this issue is because this new firmware you flashed doesn't contain a custom radio and the n7100 firmware did. You will need to find a n7105 radio, flash that through CWM or TWRP and you should be back in business mate.
Click to expand...
Click to collapse
where i can download n7105 radio ???
and how to flash the radio?
where i can download the stock Radio, Firmware, and rom of N7105 ???
i Have tried Odin, and flash Stock rom... but i dont know how to wipe data and chache from odin..
i just flash it..
and now, my Signal is appear... lol...
thanks for everyone...
Would be glad to help you but you seem to have skipped the first rule : read, read, read before you do anything else. You even admitted that this is your first Samsung device, so why did u assume that everything should have been htc like ?
Anyhow, you can try to flash the newest 4.1.2 update for the 7105, even though I fear that your problem is your efs folder, and since this is unique for each device, no flashing any rom will put it back in place.
http://forum.xda-developers.com/showthread.php?t=2027586
Good luck,
P_
pakalrtb said:
Would be glad to help you but you seem to have skipped the first rule : read, read, read before you do anything else. You even admitted that this is your first Samsung device, so why did u assume that everything should have been htc like ?
Anyhow, you can try to flash the newest 4.1.2 update for the 7105, even though I fear that your problem is your efs folder, and since this is unique for each device, no flashing any rom will put it back in place.
http://forum.xda-developers.com/showthread.php?t=2027586
Good luck,
P_
Click to expand...
Click to collapse
yah.. i have flash that ROM just now..
but, why my signal is verry in poor level? only showing 2 bar?
im sorry, im not experienced with samsung devices
Since you said that the phone is from Australia and Optus you may want to flash its original firmware back in place :
http://www.sammobile.com/firmware/?page=3&model=GT-N7105&pcode=OPS&os=1&type=1#firmware
If you do not use the phone in Australia you may want to find a firmware (if available) for your device/geographical region.
P_
benatis said:
i Have tried Odin, and flash Stock rom... but i dont know how to wipe data and chache from odin..
i just flash it..
and now, my Signal is appear... lol...
thanks for everyone...
Click to expand...
Click to collapse
I am facing the same problem you had before, however when i try to Odin the stock 4.1.1 firmware back to the phone, it stops at the Samsung logo when restarting. I have to force back to recovery mode to flash the omega back to have it start again. Can you please tell me the steps you did on putting back to stock firmware? thanks
If you haven't yet reflashed the EFS partition (don't do that, ever ! unless you have a good reundant set of backups), you actually don't need to reflash to stock firmware at all (and I doubt that it'd do any good anyways. It just puts back a generic EFS with the files set at default values, but certainly can't put back the data you had in your own device's EFS, this is unique to each phone).
Just head on over to the Galaxy S2 forums and look for a thread called "Restore your IMEI in 9 steps" (something like that. There's actually quite a number of threads describing the same procedure, you can find them by searching "samsung restore imei" in all forums, works just as well).
I had the same problem the other day (and no backup of course, silly and impatient me... ), it worked like a charm..
It's topics like this that i know that People Will get Hurt on. Come on, read and study before doing anything on a smartphone. There's a reason why android doesn't come with administrator rights from factory.
Sent from my GT-N7100 using Tapatalk 2
hi guys,
please before you start judging on me and tell me to search the forums for the answer, please read the thread completely...
i have galaxy S III AT&T which lost the imei after rooting and cwm installation. the full details for the mobile is attached below.
i found many threads for solutions like QPST and Z3X activation box to inject the imei again but my major problem was in both procedures the will not be recognized from the tool due to the DIAG Mode is not enabled...
when i try to enable it with any code like *#9090# or *#0909# and also scripts nothing pop up to enable and according to one good guy here, this issue happen when the imei is lost..
please if any one could fix this issue...help us all because many people need it!!!
one more question which is disturbing me....most of the threads for rooting here does not mention the build number that is capable to apply to !!!! mentioning that i have another SIII at&t which was flashed by friend of mine to:
SGH-I747M stock rom
Build Number : JRO03L.I747MVLDLK4
Jelly Bean: 4.1.1
and i am afraid to flash it back to the stock rom of SGH-I747 ( PDA = I747UCDLK3 ) from sammobile and face the same destiny!!
Please help us guys with every thing i mentioned before...
Why don't you try to ODIN back to stock 4.1.2 and see what happens? No root and stock recovery. I've read where some have gotten their IMEI back by doing that. At the very least, it may cause the diag codes to work. You may need to reroot if you try to re inject it with one of the methods you mentioned.
beaverslayer said:
Why don't you try to ODIN back to stock 4.1.2 and see what happens? No root and stock recovery. I've read where some have gotten their IMEI back by doing that. At the very least, it may cause the diag codes to work. You may need to reroot if you try to re inject it with one of the methods you mentioned.
Click to expand...
Click to collapse
Can you share the ODIN file for 4.1.2? I only have 4.1.1
beaverslayer said:
Why don't you try to ODIN back to stock 4.1.2 and see what happens? No root and stock recovery. I've read where some have gotten their IMEI back by doing that. At the very least, it may cause the diag codes to work. You may need to reroot if you try to re inject it with one of the methods you mentioned.
Click to expand...
Click to collapse
i have no problem to do so....but does the stock rom for jelly bean 4.1.2 ( PDA = I747UCDLK3 ) has safe root??!!!
because most of the time when i try to auto cf root these devices nothing will happen...the device will restart for root and the red droid will show up, then it will stuck in ( cleaning up..... ) and wont go for rooting !!!
i think these devices has a locked bootloader!!!
beaverslayer said:
Why don't you try to ODIN back to stock 4.1.2 and see what happens? No root and stock recovery. I've read where some have gotten their IMEI back by doing that. At the very least, it may cause the diag codes to work. You may need to reroot if you try to re inject it with one of the methods you mentioned.
Click to expand...
Click to collapse
milan guy said:
i have no problem to do so....but does the stock rom for jelly bean 4.1.2 ( PDA = I747UCDLK3 ) has safe root??!!!
because most of the time when i try to auto cf root these devices nothing will happen...the device will restart for root and the red droid will show up, then it will stuck in ( cleaning up..... ) and wont go for rooting !!!
i think these devices has a locked bootloader!!!
Click to expand...
Click to collapse
i flashed the mobile to the stock rom i mentioned before but the diag still not show up!!!
please guys help me....
milan guy said:
i flashed the mobile to the stock rom i mentioned before but the diag still not show up!!!
please guys help me....
Click to expand...
Click to collapse
Yea, now I see there is no tar 4.1.2 to go back to. I think since that's the case, I would connect to Kies with a PC and do an emergency firmware recovery. Hopefully that will fix you up.
milan guy said:
hi guys,
please before you start judging on me and tell me to search the forums for the answer, please read the thread completely...
i have galaxy S III AT&T which lost the imei after rooting and cwm installation. the full details for the mobile is attached below.
i found many threads for solutions like QPST and Z3X activation box to inject the imei again but my major problem was in both procedures the will not be recognized from the tool due to the DIAG Mode is not enabled...
when i try to enable it with any code like *#9090# or *#0909# and also scripts nothing pop up to enable and according to one good guy here, this issue happen when the imei is lost..
please if any one could fix this issue...help us all because many people need it!!!
one more question which is disturbing me....most of the threads for rooting here does not mention the build number that is capable to apply to !!!! mentioning that i have another SIII at&t which was flashed by friend of mine to:
SGH-I747M stock rom
Build Number : JRO03L.I747MVLDLK4
Jelly Bean: 4.1.1
and i am afraid to flash it back to the stock rom of SGH-I747 ( PDA = I747UCDLK3 ) from sammobile and face the same destiny!!
Please help us guys with every thing i mentioned before...
Click to expand...
Click to collapse
Try this you can update to last firmware too.
I have the GT-n7105 but i am unable to find anyway to unlock it so i can use other sims in it, i even took it to a shop and they said they can not do it, can someone point me in the right direction ?
emmanneil said:
I have the GT-n7105 but i am unable to find anyway to unlock it so i can use other sims in it, i even took it to a shop and they said they can not do it, can someone point me in the right direction ?
Click to expand...
Click to collapse
Right, as long as JB 4.3 has not been flashed listen up.
You have to do some homework, I cannot tell you what to do exactly, its all here already.
You will need to do a full EFS backup ok, full using the only method that works, so you will need the tools and the usb driver,.
You will have to downgrade to 4.1.1 using Odin 3.07 or newer, that runs on windows and using a cable.
You then enter the code that is explained in the rom development thread that explains how to unlock for free, which works as I did it on my n7105.
Next once you confirm unlocked, immediately upgrade to 4.1.2 again using ODIN. If you wish to go to 4.3, use Lion Rom or DN3, or other rom that has Knox free bootloader.
Best of luck, please use the thanks button if helpful and merry Christmas.
Once you confirm unlock
(InsertNameHere) said:
Right, as long as JB 4.3 has not been flashed listen up.
You have to do some homework, I cannot tell you what to do exactly, its all here already.
You will need to do a full EFS backup ok, full using the only method that works, so you will need the tools and the usb driver,.
You will have to downgrade to 4.1.1 using Odin 3.07 or newer, that runs on windows and using a cable.
You then enter the code that is explained in the rom development thread that explains how to unlock for free, which works as I did it on my n7105.
Next once you confirm unlocked, immediately upgrade to 4.1.2 again using ODIN. If you wish to go to 4.3, use Lion Rom or DN3, or other rom that has Knox free bootloader.
Best of luck, please use the thanks button if helpful and merry Christmas.
Once you confirm unlock
Click to expand...
Click to collapse
thanks for the info,
I have done some homework and i dont want spoon feeding and maybe i didnt explain myself properly in the OP. I have done the EFS back up and a full NANDROID backup . i have odin but i am falling at the last fence of finding 4.1.1 rom. i find roms but they all seemed based on 4.1.2 or higher. i did try and put a differenet modem on to get the options i need but all the hotfil links are dead
So find a rom for your device from another country or network, no big deal, as long as its 4.1.1 and for your device, and you can set your language temporarily so you can read what you are doing, flash it, do a full factory reset in recovery wipe cache etc, then, when your running 4.1.1, get straight to unlocking, once done and confirmed, get updating to at least 4.1.2 as you don't want to stay on 4.1.1 in case of sudden death.
Best of luck, you can work it out, I flashed maybe 5 different networks roms before I realised I was flashing ones for the wrong network.
unlocking
emmanneil said:
I have the GT-n7105 but i am unable to find anyway to unlock it so i can use other sims in it, i even took it to a shop and they said they can not do it, can someone point me in the right direction ?
Click to expand...
Click to collapse
As members have mentioned, down grading works...i had up dated to 4.3 official and then rooted, paid the 16 dollars and had the code sent from Cellunlocker.com. May not of been free, but it was too easy.
Hi ,
i have tryed many times now to update my device from at&t sgh-i317 (4.1.2) to recent android (4.4.. minimum) whitout succes, i had always te null imei and worked 2 days to get it back whitout backup....
flashed twrc result now always in null imei, if i want it back, the only way is flash in odin the only working stock rom KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar
Strange thing was that i was on 4.4.2 branded as gt-n7100 and now it's at&t sgh-i317 (but i get back imei and baseband)?!?!
I have help many guys in the past but now i need help as i can't find a solution and really want to update!
can someone good help me step by step please?
THX in advance guys
If rom branding is showing n7100...you are flashing the wrong builds...
N7100 roms are not compatible with the SGH-I317...g
gregsarg said:
If rom branding is showing n7100...you are flashing the wrong builds...
N7100 roms are not compatible with the SGH-I317...g
Click to expand...
Click to collapse
yes ive seen it and can't understand it, i was sure it was n7100 before? im also from belgium and by this in a belgian store wich is not at&t....so now you think is a do it again with the good files it wil work? is there any specific recovery then i need for my model? thx mate...
also can i flash it back to gt-n7100 please??? someone can try to find a solution with me?
If your device is N7100...then yes...you can use the stock N7100 rom to repair the device..
Regarding the recovery...you can use TWRP latest version for the N7100 device.
Files can be found in that section on xda...g
gregsarg said:
If your device is N7100...then yes...you can use the stock N7100 rom to repair the device..
Regarding the recovery...you can use TWRP latest version for the N7100 device.
Files can be found in that section on xda...g
Click to expand...
Click to collapse
ok i will try that again, thx for help i come back tomorrow to report when it's done or not...
wait a minute, ive seen now that the imei is changed also,how is this possible??? that's why the brand as change to at&t.... from 7100!
i hope it's possible to get it back to stock with original imei? is someone able to help me out or te redirect me to someone that can help me out please? thx
just for info my imei as now /5 at the end?!
Finaly i get it updated and working on 4.4.2
the imei as changed again to another one but not matched with original....but it's working.
im stil on at&t but happy to have it on 4.4.2 working.
now if its possible to fix the imei or eventualy get it back branded as 7100...i take it?
i have installed dn4 2.4 rom finally to be quit of the at&t sh**
it is al working well so i leave it as it is for now.
the solution for me was reinstall stock rom (odin) , update stock rom to 4.4.2 (odin) then install recovery (odin), install new custom rom (twrp), new bootloader (odin) et voila!...gregsarg thx for help.
for a community as this i was thinking that more poeple should help....like we did in the past
Hello,
I'm trying to look for the fresh stock rom of SGH-I317 rom so I can flash my phone back to normal. I owned this phone since 2012, I had it rooted and everything else. Last night, it decided to do something funny and now it gets stuck on samsung logo/battery and I can only access download mode for the time being.
So I assume I have to factory set everything and lose data--which i don't care about anymore.
Can anyone please help? Thank you. Stock rom is what I need and Odin as well. Thanks again =)
Adam.
As far as I know there are at least 4 different STOCK versions of SGH-I317 firmware namely 4.1.1 4.1.2 4.3 and 4.4.2. 4.1.2 is the same as 4.1.1 but it has SIM unlock backdoor closed. 4.1.1 is interchangeable up to 4.3 with certain limitations, as soon as you get 4.4.2 you are stock to it.
4.3 is my personal favorite but I can't seem to find clean AT&T ROM for some time now (everything else is available).
If I were you I'd start powering up the phone while holding home and arrow up buttons, do "wipe data/factory reset" follow with "wipe cache partitions" and you should be golden
toshik1 said:
As far as I know there are at least 4 different STOCK versions of SGH-I317 firmware namely 4.1.1 4.1.2 4.3 and 4.4.2. 4.1.2 is the same as 4.1.1 but it has SIM unlock backdoor closed. 4.1.1 is interchangeable up to 4.3 with certain limitations, as soon as you get 4.4.2 you are stock to it.
4.3 is my personal favorite but I can't seem to find clean AT&T ROM for some time now (everything else is available).
If I were you I'd start powering up the phone while holding home and arrow up buttons, do "wipe data/factory reset" follow with "wipe cache partitions" and you should be golden
Click to expand...
Click to collapse
Thanks replying. Unfortunately.. I tried getting into recovery mode but it just won't let me. when I do that.. it only takes me back to the samsung logo. I really really don't know why...
Right now I only have access to the Odin Mode and it comes up as
Product Name :
Custom Binary Download : No
Current Binary Samsung Official
System Status : Custom
did you try flashing recovery again through odin...u can also try this...not sure if it works 100% in ur case...but doesn't hurt to try.
https://forum.xda-developers.com/showpost.php?p=70916644&postcount=11912
dssheeley1 said:
did you try flashing recovery again through odin...u can also try this...not sure if it works 100% in ur case...but doesn't hurt to try.
https://forum.xda-developers.com/showpost.php?p=70916644&postcount=11912
Click to expand...
Click to collapse
See that's the thing. I need the stock rom so i can flash it lol. I asked it a few times before too ^__^;; . The good thing is, the battery still works fine .
Now on Odin.. I get many failed attempts..so I'm not sure I have the right stock rom.
edit : I tried that method..didn't work ....
beatsme2 said:
See that's the thing. I need the stock rom so i can flash it lol. I asked it a few times before too ^__^;; . The good thing is, the battery still works fine .
Now on Odin.. I get many failed attempts..so I'm not sure I have the right stock rom.
edit : I tried that method..didn't work ....
Click to expand...
Click to collapse
Try samsung firmware n get rom that way...then reroot
dssheeley1 said:
Try samsung firmware n get rom that way...then reroot
Click to expand...
Click to collapse
Amigo...
Whereeeeeeeee..... u__u;
beatsme2 said:
Amigo...
Whereeeeeeeee..... u__u;
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/
Remember u can downgrade from 4.4.x...there's a thread in forum that explains what tz files r needed and which bootloader 2...I've done it couple of times myself from Dn4 rom and Eclipse V9 from 7100 thread. Just gotta read and be patient. Hope u get all straightened out. Keep us informed on progress.
With the phone in download mode, is there anything on the phone about knox or warranty bit? If there is, the phone can't be flashed with any stock ROM from sammobile.com.
dssheeley1 said:
https://www.sammobile.com/firmwares/
Remember u can downgrade from 4.4.x...there's a thread in forum that explains what tz files r needed and which bootloader 2...I've done it couple of times myself from Dn4 rom and Eclipse V9 from 7100 thread.
Click to expand...
Click to collapse
REALLY??? Please show us the link for upgrade! As I said there is no OEM 4.3 ROM at sammobile
I was told many many times that AT&T (and this is the one we are talking about) 4.4.2 ROM can not be downgraded!
I tired the downgrade and yes the system will go down to 4.1.1 but it would keep the 4.4.2 bootloader so the phone won't charge while being off (making it pretty useless).
@audit13 : I've the phone since 2012. I think Im getting a new as is but I know this phone can't be done just yet. if I'm able to access download mode that should warrant itself the possibility of it being fixed. Just need that thread to follow those directions =)
dssheeley1 said:
https://www.sammobile.com/firmwares/
Remember u can downgrade from 4.4.x...there's a thread in forum that explains what tz files r needed and which bootloader 2...I've done it couple of times myself from Dn4 rom and Eclipse V9 from 7100 thread. Just gotta read and be patient. Hope u get all straightened out. Keep us informed on progress.
Click to expand...
Click to collapse
Good Morning, thanks for the link.. But I'm already lost at which one I'm supposed to pick. Can you provide a link to that thread, please? Thank you
Adam
OMG, my bad.
Does the phone say anything about warranty bit or knox in download? If it does, the phone can't be flashed with any ROMs from sammobile.com.
my phone is SGH-I317 NOTE 2 .....
Did you have a chance to look at the download screen on the phone? Model is sgh-i317 in download screen too?
audit13 said:
Did you have a chance to look at the download screen on the phone? Model is sgh-i317 in download screen too?
Click to expand...
Click to collapse
Hi. This is all i have on the download section
http://imgur.com/a/zYql8
Maybe I'm missing something extra like the videos i've seen ?
What is the model number on the label under the battery? Something is very wrong because there is no model number.
audit13 said:
What is the model number on the label under the battery? Something is very wrong because there is no model number.
Click to expand...
Click to collapse
Well the model number SGH-I317 . I'm sure I mentioned it before. And yes. .I find that to be weird too >__<.. What am I missing?
In this case, I would try and flash the stock ROM from sammobile.com in Odin: https://www.sammobile.com/firmwares/database/SGH-I317/
Ok.. so if I download both of these (or which one do you prefer? ). What else do I need to download? I do have two versions of Odin.
edit :
So i tried it on Odin 1.85.
I get something like GET PIT FOR MAPPING?
edit 2 :
Another Odin version gave me
Can't open the serial(COM) port after setup connection
sorry for double posting but here's a reminder
Ok.. so if I download both of these (or which one do you prefer? ). What else do I need to download? I do have two versions of Odin.
edit :
So i tried it on Odin 1.85.
I get something like GET PIT FOR MAPPING?
edit 2 :
Another Odin version gave me
Can't open the serial(COM) port after setup connection