can anyone help guys
my friends g3 got bricked to the lvl i don't think is possible to go back,but i'll still try here
so first when he gave it to me yesterday the problem was blue screen,totally unresponsive ofc,but his hard mode worked to go to download or hard reset,but someone in the store where he asked for help told him to do hard reset,which he did,and after that it's giving an secure booting error
and now i tryed many many ways to recover it but no success,it won't go to download mode at all,even when connected as 9008 through port
i can't flash anything on it,i used board diag,qpst,lgup,lg flash tool,mobile support tool,i just can't get any way into device to do anything
although I think i know the answer,but does someone know any other solution?
lg g3 bricked
hello_kitty123 said:
can anyone help guys
my friends g3 got bricked to the lvl i don't think is possible to go back,but i'll still try here
so first when he gave it to me yesterday the problem was blue screen,totally unresponsive ofc,but his hard mode worked to go to download or hard reset,but someone in the store where he asked for help told him to do hard reset,which he did,and after that it's giving an secure booting error
and now i tryed many many ways to recover it but no success,it won't go to download mode at all,even when connected as 9008 through port
i can't flash anything on it,i used board diag,qpst,lgup,lg flash tool,mobile support tool,i just can't get any way into device to do anything
although I think i know the answer,but does someone know any other solution?
Click to expand...
Click to collapse
bro i will solve ur issue through teamviewer
Related
Hello i hard bricked my phone becasue someone gave me a rom that was a crap port and hard bricked my phone so i got the qh-usb drivers then i heard of something called QPST i got my phone to connect to qpst in download mode for it if anyone can help me and get my phone back into working order or at least tell me if it would work
tim45255 said:
Hello i hard bricked my phone becasue someone gave me a rom that was a crap port and hard bricked my phone so i got the qh-usb drivers then i heard of something called QPST i got my phone to connect to qpst in download mode for it if anyone can help me and get my phone back into working order or at least tell me if it would work
Click to expand...
Click to collapse
What port was this you speak of?
tim45255 said:
Hello i hard bricked my phone becasue someone gave me a rom that was a crap port and hard bricked my phone so i got the qh-usb drivers then i heard of something called QPST i got my phone to connect to qpst in download mode for it if anyone can help me and get my phone back into working order or at least tell me if it would work
Click to expand...
Click to collapse
So, you can get into download mode?
Sent from JMT Goodness
Hi,
I was trying to flash a stock rom on my LG G3, but the flash blocked at 5%, so i rebooted the phone, and now I haven't the possibility to acces at the download mode or recovery mode.
and when I try to go in download mode, my computer show my G3 at QHSUSB_BULK.
Any help here? please.
Thanks you guy's.
Try LG boot repair tool I think its name was something like this...you can find it on there web page.
http://forum.xda-developers.com/sitesearch.php?q=QHSUSB BULK
I already made a search hack14u, and I found only soft for G2 or Samsung phone.
I don't find LG boot repair tool too.
I think there is no solution
edit : I can access to the Factory Reset screen, if I say no or yes, I come back to "Secure booting error ! cause : boot certification verify " with the LG logo.
Tumeconnais said:
I already made a search hack14u, and I found only soft for G2 or Samsung phone.
I don't find LG boot repair tool too.
I think there is no solution
edit : I can access to the Factory Reset screen, if I say no or yes, I come back to "Secure booting error ! cause : boot certification verify " with the LG logo.
Click to expand...
Click to collapse
Can you enter download mode? If yes download the desired firmware and flash with LG Flash Tool 2014, check this thread http://forum.xda-developers.com/showthread.php?t=2785089
No download mode
Tumeconnais said:
No download mode
Click to expand...
Click to collapse
Shut device down completely(Remove battery if you can't do it with button). Then press and hold Volume up and plug usb cable while connected to computer, that's how you enter download mode, did you do that and it didn't work?
Yes it didn't work, computer recognize it as Qhsusb_bulk.
Tumeconnais said:
Yes it didn't work, computer recognize it as Qhsusb_bulk.
Click to expand...
Click to collapse
LG PC Suite has an option somewhere in the menus to reflash-restore firmware, there should be something like Repair recovery or something like that, don't have the program right in front of me sorry Make sure you have installed drivers from previous post that I linked you, make sure that it's recognised in windows device manager. If this still doesn't solve your problem then the repair is much more complicated / difficult, needs jtag **** = getting stuff from it's motherboard etc, there are some guys that do that all over the world but it would be better if you send it to your provider or from where you get it for a repair service/ replacement ( if you still have warranty ).
Tomorrow I will try to find this option in LG PC Suite. If I need JTAG, it's better to send to LG for repair, yes luckily I have the warranty.
Hope he don't make me pay for that. I gonna say a official upgrade goes wrong or something like that.
Thanks for your response !
Happy new year
Edit : I tried the option in LG PC suite, and the sfot doesn't find my G3. So Tommorow I gonna send my phone at LG.
Thank's for your help
i flashed the wrong baseband and rom by mistake. how? well i rename it and got confused and mix it with other roms.well the point now is my lg g3 is bricked and i need help to get it back to life please anyone help
anyone? please help.
anyone please help i will give 40dlls on paypal to anyone how can get my phone working again.i will give the 40 bucks seriously
Can you get into recovery or download mode?
nothing just black screen no led either but the computer recognizes the phone on devices settings it shows LGE androidnet usb serial port.
i tried every guide here on xda to unbrick and a few on other sites and noghting
the only thing i did not try yet is a tool called lg smart boot diagnosis tool that theres nowhere to download only an xda member seems to have this tool but im waiting to see if he can share the tool or no
I dont have much experience with lg yet but if there is a flashing tool for it since u can still get the computer to read you just the tool and stock rom reflash and startover
i tried that already the problem i got now is the phone cannot get to be on download mode lg flash tool gets me an error that can't change to dlmode. it seems im running out of options maybe i should send my phone to lg for repair but i rather not i would like to try a little more before doing that
brigantti said:
i tried that already the problem i got now is the phone cannot get to be on download mode lg flash tool gets me an error that can't change to dlmode. it seems im running out of options maybe i should send my phone to lg for repair but i rather not i would like to try a little more before doing that
Click to expand...
Click to collapse
To put it simply if you cannot get to download mode, at this time you are sol. Maybe in the future if we get the qualcomm files you could fix it if your pc recognizes in one way or another it is connected under ports. But right now as we stand we do not have the files to recover from your type of brick.
thanks for you reply it seems that im gonna have to send it to lg for repair i bought it second hand so t-mobile will not help me with this.
Can you get adb to recognize it? You might be able to extract the laf.img and use adb to flash it back to your phone. Then you'll have download mode back.
no adb either i tried that. i try all kdz methods,flash tool with tot file and modded dll it gets stuck on can"t change to download mode. thanks for asking
the only method i did no try yet is the lg smart boot diagnosis tool that a xda member has but dont wants to share the tool
brigantti said:
the only method i did no try yet is the lg smart boot diagnosis tool that a xda member has but dont wants to share the tool
Click to expand...
Click to collapse
So... if you turn off your phone and then push VOL up and insert a USB doesn't go in laf mode?
Sent from my SM-N910F using XDA Free mobile app
Skin1980 said:
So... if you turn off your phone and then push VOL up and insert a USB doesn't go in laf mode?
Sent from my SM-N910F using XDA Free mobile app
Click to expand...
Click to collapse
no nothing happens just a black screen
Black screen might not mean its not doing anything
deron37129 said:
Black screen might not mean its not doing anything
Click to expand...
Click to collapse
This is true but two problems exist:
1) Correct me if this is wrong, if you brick your phone and don't automatically boot into fastboot mode there is no way to do it. You need to flash the full fledged laf.img so it is booted when you do the vol + plug in instead of booting to lg boot loader.
2) Even if his computer can recognize the phone what he has done probably makes it boot into QHSUSB mode and at this time we have no solution to fix it.
I have read somewhere on the g2 forum of fixing one of the types of QHSUSB bricks (they come in a couple of flavors) but I can't remember which one. I do remember he needed to flash the full fledged fastboot laf somehow then flash the aboot partition via fastboot. So if I was you I would do some digging in the g2 forums.
thanks everyone for trying to help.well i just send my phone back to lg for repair i will inform everyoneif lg repair my g3 or not thanks again
I am also facing this problem it's completely bricked when I connect device to computer it shows LGE ANDROIDNET SERIAL please help to solve this problem
On the computer or the phone
I have bricked my phone (don't know how ), or it's a hardware failure (maybe mmc), i tried to restore backup that i've restored a couple of times prior to today, and always was all ok, but not this time, twrp reported error during restore and had to pull out the battery to restart the phone and now can't enter to recovery or boot up the system
I tried with flash tool 2014 and didn't have success, keep getting message 'the phone disconnected from pc', drivers are installed correctly, but maybe my problem is that when i try to enter download mode after 4-5 seconds of download mode screen it transfers to fastboot mode started (no 'firmware update' screen). Tried with laf.img, recovery.img, boot.img via fastboot commands and keep getting messages
error : command never completed
error : auto CMD12 error
error : command completed with errors
error : command timeout error
failed to send stop command
failed writing block @ 1
Is there any method that I could try, or it's a dead hardware?
Highly recommend you take it in to a service center and get them to look at it. Just tell them that you were updating your phone from Kitkat to lollipop and that happened using the LG PC Suite
If you were restoring a backup of stock rom theres absolutely no proof whatsoever that you rooted it or you installed custom recovery and repair people cant be bothered going into fine detail just to check.
Essentially all your system partitions are blank except bootloader which is at least better than those who get QHUSB_DLOAD
Open teamveiwer i see error
Can not flash in fastboot>?
Hi,
Same problem here. Have you found a solution? Unfortunately, cannot flash in fastboot, because I always get the same error message:
error : auto CMD12 error
Can you help me please??
soultion for no download mode, fastboot mode, qhsusb bulk mode
Hi dear frends.
Its sad to know that all you guys cant go to download mode or facing security error or stuck in lg logo or in fastboot mode
And some guys stuck qhsuab bulk 9008
So the solution is here.
If you are unable to get into download mode then you need to force your g3 into qhsusb bulk mode by shorting the test point.
I will help u all guys.....
I will help u to unbrick ur any lg model wothout download mode or stuck in 9008 or anytype of problem.
Please let me know your problem in pm.
Need help fixing LG G3 D852 Hard-Brick!
aftabalam8c2 said:
Hi dear frends.
Its sad to know that all you guys cant go to download mode or facing security error or stuck in lg logo or in fastboot mode
And some guys stuck qhsuab bulk 9008
So the solution is here.
If you are unable to get into download mode then you need to force your g3 into qhsusb bulk mode by shorting the test point.
I will help u all guys.....
I will help u to unbrick ur any lg model wothout download mode or stuck in 9008 or anytype of problem.
Please let me know your problem in pm.
Click to expand...
Click to collapse
Hi! I just recently bricked my LG G3 D852, and I would really appreciate it if you could PM me and help me out here.
http://forum.xda-developers.com/showthread.php?t=2785089
If it's a software issue, this will revert to stock, and absolute factory.
Sent from my D855 running CloudyG3 2.3 with Gabriel5 kernel.
Don't forget to smash that thanks button if I, or someone else helps you, guys!
Mevolent said:
http://forum.xda-developers.com/showthread.php?t=2785089
If it's a software issue, this will revert to stock, and absolute factory.
Sent from my D855 running CloudyG3 2.3 with Gabriel5 kernel.
Don't forget to smash that thanks button if I, or someone else helps you, guys!
Click to expand...
Click to collapse
Can you help me unbrick it? I'm completely lost here I can't find my IMEI, the stickers were removed and also there isn't one on the phone itself. The phone is dead so I can't find it that way, but I'm trying to find the right kdz file :C
hai_im_edd said:
Can you help me unbrick it? I'm completely lost here I can't find my IMEI, the stickers were removed and also there isn't one on the phone itself. The phone is dead so I can't find it that way, but I'm trying to find the right kdz file :C
Click to expand...
Click to collapse
What region are you in?
Europe has the D855 in 16GB and 32GB
Canada has the D852
Verizon has the Vs985
T-Mobile USA has the D851
AT&T Is the D850
Australia had the D855k
LS990 is Sprint
F400K/L/S is Korean
There are plenty more http://forum.xda-developers.com/showthread.php?t=2791269[URL]here
Sent from my D855 running CloudyG3 2.3 with Gabriel5 kernel.
Don't forget to smash that thanks button if I, or someone else helps you, guys!
Mevolent said:
What region are you in?
Europe has the D855 in 16GB and 32GB
Canada has the D852
Verizon has the Vs985
T-Mobile USA has the D851
AT&T Is the D850
Australia had the D855k
LS990 is Sprint
F400K/L/S is Korean
There are plenty more http://forum.xda-developers.com/showthread.php?t=2791269[URL]here
Sent from my D855 running CloudyG3 2.3 with Gabriel5 kernel.
Don't forget to smash that thanks button if I, or someone else helps you, guys!
Click to expand...
Click to collapse
From Canada, (eh?) so I have the D852 model!
hai_im_edd said:
From Canada, (eh?) so I have the D852 model!
Click to expand...
Click to collapse
Before you do anything, read the entire post linked. There is a D852g version.
Sent from my D855 running CloudyG3 2.3 with Gabriel5 kernel.
Don't forget to smash that thanks button if I, or someone else helps you, guys!
I see, thank you very much
I have the same problem, has anyone been able to fix it?
Kirckete said:
I have the same problem, has anyone been able to fix it?
Click to expand...
Click to collapse
Remove the battery, put it, press the volume + and connect to PC USB, if like entering download, what
happens to us not to go, will leave the ****ing LoGo, Well, hold down the volume + and not let go, I
think it is less for 2 minutes more. After a while, the computer tells us that something was connected,
the phone will tell you who is in fastboot as I said before, if not let me fastboot flash boot files and
the LAF, recovery ect, nothing happens, there is still a magic command.
fastboot boot laf.img
Keep it in the ****ing heart
Hey guys,
I have lg g3 d855 it was with lolipop v21a (TWN version) and now I kinda of destroyed it when I flashed a marshmallow rom for hong kong lg g3 d 858HK(wish i had know that earlier) ,
so what i currently have is a phone with no wifi or signal ( so no way of connecting to internet) and it is not recognized by computer ... I can enter download mode but still i get the error usb device not recognized
any idea or suggestion of how to fix it ? or is it hard bricked ?
any idea any one please ? :crying:
patrs63 said:
any idea any one please ? :crying:
Click to expand...
Click to collapse
please ?
so its lost, how can I close thread ?
patrs63 said:
so its lost, how can I close thread ?
Click to expand...
Click to collapse
It's probably not lost, but you'll need to get to work & it is a mild pain in the a** to do so...
https://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Dont mind the sprint variant, just use the proper files for your phone this time around
I brought a phone up last week via this method. The hardest part is getting the phone to show up as qualcomm 9008 & to communicate with it(need the proper drivers and need a good cable). It can be a little tricky, but once you figure that part out the flashing part is easy.
*The method I linked above should be considered a last resort.*
But I thought you posted you can get into download mode earlier, so make sure your computer isn't the issue. Uninstall all lg drivers & reinstall them. If you have download mode/firmware update displayed on your phone screen and it shows up as lge serial port(or something like that) in device manager you should just be able to TOT or KDZ your stock firmware. I believe there are instructions for that in the link as well; if not - google is your friend.
Gd luck:good:
startswithPendswithOOH said:
It's probably not lost, but you'll need to get to work & it is a mild pain in the a** to do so...
https://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Dont mind the sprint variant, just use the proper files for your phone this time around
I brought a phone up last week via this method. The hardest part is getting the phone to show up as qualcomm 9008 & to communicate with it(need the proper drivers and need a good cable). It can be a little tricky, but once you figure that part out the flashing part is easy.
*The method I linked above should be considered a last resort.*
But I thought you posted you can get into download mode earlier, so make sure your computer isn't the issue. Uninstall all lg drivers & reinstall them. If you have download mode/firmware update displayed on your phone screen and it shows up as lge serial port(or something like that) in device manager you should just be able to TOT or KDZ your stock firmware. I believe there are instructions for that in the link as well; if not - google is your friend.
Gd luck:good:
Click to expand...
Click to collapse
well my computer is not the problem since i tried 2 or 3 other computers and few other cables , still no luck recognizing it in download mode ... so i guess ill go for the qualcomm method :/
but what exactly does shortining the pen mean ? and is there a video for that ?