Hello i hard bricked my phone becasue someone gave me a rom that was a crap port and hard bricked my phone so i got the qh-usb drivers then i heard of something called QPST i got my phone to connect to qpst in download mode for it if anyone can help me and get my phone back into working order or at least tell me if it would work
tim45255 said:
Hello i hard bricked my phone becasue someone gave me a rom that was a crap port and hard bricked my phone so i got the qh-usb drivers then i heard of something called QPST i got my phone to connect to qpst in download mode for it if anyone can help me and get my phone back into working order or at least tell me if it would work
Click to expand...
Click to collapse
What port was this you speak of?
tim45255 said:
Hello i hard bricked my phone becasue someone gave me a rom that was a crap port and hard bricked my phone so i got the qh-usb drivers then i heard of something called QPST i got my phone to connect to qpst in download mode for it if anyone can help me and get my phone back into working order or at least tell me if it would work
Click to expand...
Click to collapse
So, you can get into download mode?
Sent from JMT Goodness
Related
i just bought this phone, and its bricked. i can only get into download mode and the computer does not see it when i use adb. can i unbrick?
rob219 said:
i just bought this phone, and its bricked. i can only get into download mode and the computer does not see it when i use adb. can i unbrick?
Click to expand...
Click to collapse
r u install driver of G Pro? ???
What did you go to get there? That might help figure it out
apascual89 said:
What did you go to get there? That might help figure it out
Click to expand...
Click to collapse
i figures it out. formatted everything but my sdcard and flashed the stock firmware in download mode. it was a pain though as the instructions arent quiye rigjt and i had to go to sites other than xda to piece it all together.
rob219 said:
i figures it out. formatted everything but my sdcard and flashed the stock firmware in download mode. it was a pain though as the instructions arent quiye rigjt and i had to go to sites other than xda to piece it all together.
Click to expand...
Click to collapse
You should type up a quick guide.
Yesterday I bricked my phone as well. I just followed this method to unbricked my phone. It works~
Nukpana said:
Yesterday I bricked my phone as well. I just followed this method to unbricked my phone. It works~
Click to expand...
Click to collapse
hi
when you say you bricked your phone ... what does BRICK mean ?
i bricked my phone and doesn't even start up.. shows qualm download mode when connected to pc
thanks
zohaer21 said:
hi
when you say you bricked your phone ... what does BRICK mean ?
i bricked my phone and doesn't even start up.. shows qualm download mode when connected to pc
thanks
Click to expand...
Click to collapse
My phone stopped at ATT's boot logo(soft brick), but it was allowed me to boot into the download mode.
Hey guys,
My Galaxy s3 is pretty much useless at the moment. I had it rooted a while back and decided to unroot it. I used Odin and the stock rom for telus galaxy s3 sgh-i747m. Odin did its job and showed it was done successfully, however the phone never booted back up even with holding the combo buttons (VolumeUp+home+power). Also my computer cannot detect the phone driver via usb cable showing QHSUSB_DLOAD, but it does make a beeping sound when connecting it or holding the combo keys while it's plugged in via usb cable.
I used a usb jig hoping it would get it to boot into download mode but no luck. I can take it for a JTAG and get it fixed, but since I screwed up I rather spend some more time and learn to fix it myself. A friend mentioned about QPST in order to get it to download mode and using a similar stock rom reprogram the phone, which I'm not familiar with.. anyone can give me a hint how to go bout this your help is much appreciated
If you need more info or i missed something please let me know...
4tunecookie said:
Hey guys,
My Galaxy s3 is pretty much useless at the moment. I had it rooted a while back and decided to unroot it. I used Odin and the stock rom for telus galaxy s3 sgh-i747m. Odin did its job and showed it was done successfully, however the phone never booted back up even with holding the combo buttons (VolumeUp+home+power). Also my computer cannot detect the phone driver via usb cable showing QHSUSB_DLOAD, but it does make a beeping sound when connecting it or holding the combo keys while it's plugged in via usb cable.
I used a usb jig hoping it would get it to boot into download mode but no luck. I can take it for a JTAG and get it fixed, but since I screwed up I rather spend some more time and learn to fix it myself. A friend mentioned about QPST in order to get it to download mode and using a similar stock rom reprogram the phone, which I'm not familiar with.. anyone can give me a hint how to go bout this your help is much appreciated
If you need more info or i missed something please let me know...
Click to expand...
Click to collapse
Im not a pro, but it sound like a wrong rom was flashed. Good luck mate!
I know it's for another device but most of these still apply, I'd suggest giving them a try: http://forum.xda-developers.com/showthread.php?t=1953930
QHSUSB_DLOAD is a sure sign of a hard brick.
BWolf56 said:
I know it's for another device but most of these still apply, I'd suggest giving them a try: http://forum.xda-developers.com/showthread.php?t=1953930
Click to expand...
Click to collapse
Thanks bud, I'm gonna look it up,, here's what i've done so far: i got the qualcom high speed usb driver and my computer detected the phone on COM4, and QPST also detected it on COM4... any clue what to do next?
I also need a reliable telus stock rom for my phone (sgh-i747m) so i dont screw up my galaxy again! :/
4tunecookie said:
Thanks bud, I'm gonna look it up,, here's what i've done so far: i got the qualcom high speed usb driver and my computer detected the phone on COM4, and QPST also detected it on COM4... any clue what to do next?
I also need a reliable telus stock rom for my phone (sgh-i747m) so i dont screw up my galaxy again! :/
Click to expand...
Click to collapse
Get the one from sammobile.com and flash it with Odin.
BWolf56 said:
Get the one from sammobile.com and flash it with Odin.
Click to expand...
Click to collapse
Odin doesn't detect it yet.. QPST detects it as "download mode" on COM4 in the QPST Configuration.
I was trying out a kitkat kernel which was for our kitkat official but I stupidly used it on an aosp rom and then my phone would only boot into cwm recovery and then I factory reset and it now doesnt even turn on, it shows up on my laptop but im running windows 8 and i havent been able to use the unbrick methods. If anyone can help out it would be appreciated and if i need to send it to LG i know i have breached warranty so what should i say to them?
Thanks!
Can you get into download mode?
Make sure the phone is off. Hold volume up and down at the same time and plug you USB cable into your phone, your phone should go into download mode.
It wont turn on at all, its like all the partitions have been corrupted. I cant get into download mode and when i go into adb it say (fault device) so I think ill need to send it back to LG
riki126 said:
It wont turn on at all, its like all the partitions have been corrupted. I cant get into download mode and when i go into adb it say (fault device) so I think ill need to send it back to LG
Click to expand...
Click to collapse
That sounds about right.....that really sucks man ....if you cant get into download mode and I don't know of a jig built for this device butni have one for Samsung which throws it into download mode......for our device I know of none..........your beat bet is probably to send it to lg as it seems to be hardbricked
2SHAYNE
Yeah i agree, thanks
Hi what should i tell LG on the phone when i call them? should i tell them the truth or a lie? its completly bricked so they wouldnt have any traces of me rooting it would they?
JustinNL said:
Can you get into download mode?
Make sure the phone is off. Hold volume up and down at the same time and plug you USB cable into your phone, your phone should go into download mode.
Click to expand...
Click to collapse
shayneflashindaily said:
That sounds about right.....that really sucks man ....if you cant get into download mode and I don't know of a jig built for this device butni have one for Samsung which throws it into download mode......for our device I know of none..........your beat bet is probably to send it to lg as it seems to be hardbricked
2SHAYNE
Click to expand...
Click to collapse
Hi what should i tell LG on the phone when i call them? should i tell them the truth or a lie? its completly bricked so they wouldnt have any traces of me rooting it would they?
riki126 said:
Hi what should i tell LG on the phone when i call them? should i tell them the truth or a lie? its completly bricked so they wouldnt have any traces of me rooting it would they?
Click to expand...
Click to collapse
Sometimes if you try to charge the phone for a really long time (say 12 to 18 hrs at stretch) - the phone starts to turn on. Try that. and see if you can boot into download mode.
Also, when you give it to LG ... tell them that it is not turning on, thats it...
ok, i tried charging it but nothing happened so ill send it to them and just say that it wont turn on. Thanks!
Once they get it booted up and see the custom kernel and Rom they are most likely going to charge you full price for another phone and of course will not honor any warrantee. As long as you're ok with that go ahead and sent it back for a replacement. with that bein said, it's probably best you tell them the truth so you get accurate info from them ahead of time.
riki126 said:
I was trying out a kitkat kernel which was for our kitkat official but I stupidly used it on an aosp rom and then my phone would only boot into cwm recovery and then I factory reset and it now doesnt even turn on, it shows up on my laptop but im running windows 8 and i havent been able to use the unbrick methods. If anyone can help out it would be appreciated and if i need to send it to LG i know i have breached warranty so what should i say to them?
Thanks!
Click to expand...
Click to collapse
If it is not to late.. What did you mean by "it shows up on my laptop but im running windows 8 and i havent been able to use the unbrick methods."?
TheMighyLoki said:
If it is not to late.. What did you mean by "it shows up on my laptop but im running windows 8 and i havent been able to use the unbrick methods."?
Click to expand...
Click to collapse
It seems to show up in device manager when i connect it with my USB as QHSUSB_DLOAD
riki126 said:
It seems to show up in device manager when i connect it with my USB as QHSUSB_DLOAD
Click to expand...
Click to collapse
Sorry I was hoping to help but from a little looking, it is Hard Brick. Sometime its the smallest thing can change everything but not this time.
Sorry and good luck.
TheMighyLoki said:
Sorry I was hoping to help but from a little looking, it is Hard Brick. Sometime its the smallest thing can change everything but not this time.
Sorry and good luck.
Click to expand...
Click to collapse
No harm done haha. ill talk to LG and see what they can do for me. Thanks
can anyone help guys
my friends g3 got bricked to the lvl i don't think is possible to go back,but i'll still try here
so first when he gave it to me yesterday the problem was blue screen,totally unresponsive ofc,but his hard mode worked to go to download or hard reset,but someone in the store where he asked for help told him to do hard reset,which he did,and after that it's giving an secure booting error
and now i tryed many many ways to recover it but no success,it won't go to download mode at all,even when connected as 9008 through port
i can't flash anything on it,i used board diag,qpst,lgup,lg flash tool,mobile support tool,i just can't get any way into device to do anything
although I think i know the answer,but does someone know any other solution?
lg g3 bricked
hello_kitty123 said:
can anyone help guys
my friends g3 got bricked to the lvl i don't think is possible to go back,but i'll still try here
so first when he gave it to me yesterday the problem was blue screen,totally unresponsive ofc,but his hard mode worked to go to download or hard reset,but someone in the store where he asked for help told him to do hard reset,which he did,and after that it's giving an secure booting error
and now i tryed many many ways to recover it but no success,it won't go to download mode at all,even when connected as 9008 through port
i can't flash anything on it,i used board diag,qpst,lgup,lg flash tool,mobile support tool,i just can't get any way into device to do anything
although I think i know the answer,but does someone know any other solution?
Click to expand...
Click to collapse
bro i will solve ur issue through teamviewer
Hey guys,
I have lg g3 d855 it was with lolipop v21a (TWN version) and now I kinda of destroyed it when I flashed a marshmallow rom for hong kong lg g3 d 858HK(wish i had know that earlier) ,
so what i currently have is a phone with no wifi or signal ( so no way of connecting to internet) and it is not recognized by computer ... I can enter download mode but still i get the error usb device not recognized
any idea or suggestion of how to fix it ? or is it hard bricked ?
any idea any one please ? :crying:
patrs63 said:
any idea any one please ? :crying:
Click to expand...
Click to collapse
please ?
so its lost, how can I close thread ?
patrs63 said:
so its lost, how can I close thread ?
Click to expand...
Click to collapse
It's probably not lost, but you'll need to get to work & it is a mild pain in the a** to do so...
https://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Dont mind the sprint variant, just use the proper files for your phone this time around
I brought a phone up last week via this method. The hardest part is getting the phone to show up as qualcomm 9008 & to communicate with it(need the proper drivers and need a good cable). It can be a little tricky, but once you figure that part out the flashing part is easy.
*The method I linked above should be considered a last resort.*
But I thought you posted you can get into download mode earlier, so make sure your computer isn't the issue. Uninstall all lg drivers & reinstall them. If you have download mode/firmware update displayed on your phone screen and it shows up as lge serial port(or something like that) in device manager you should just be able to TOT or KDZ your stock firmware. I believe there are instructions for that in the link as well; if not - google is your friend.
Gd luck:good:
startswithPendswithOOH said:
It's probably not lost, but you'll need to get to work & it is a mild pain in the a** to do so...
https://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Dont mind the sprint variant, just use the proper files for your phone this time around
I brought a phone up last week via this method. The hardest part is getting the phone to show up as qualcomm 9008 & to communicate with it(need the proper drivers and need a good cable). It can be a little tricky, but once you figure that part out the flashing part is easy.
*The method I linked above should be considered a last resort.*
But I thought you posted you can get into download mode earlier, so make sure your computer isn't the issue. Uninstall all lg drivers & reinstall them. If you have download mode/firmware update displayed on your phone screen and it shows up as lge serial port(or something like that) in device manager you should just be able to TOT or KDZ your stock firmware. I believe there are instructions for that in the link as well; if not - google is your friend.
Gd luck:good:
Click to expand...
Click to collapse
well my computer is not the problem since i tried 2 or 3 other computers and few other cables , still no luck recognizing it in download mode ... so i guess ill go for the qualcomm method :/
but what exactly does shortining the pen mean ? and is there a video for that ?