Develop Bugs

[FAQ] Support thread for CM 10.1 by Quarx! Questions? Post here!

*Copied from CM10 FAQ by RaphaelH1427.
ATTENTION: THESE BUILDS WITH KERNEL 3.0 ARE EXPERIMENTAL! QUARX IS NOT RESPONSIBLE FOR BRICKED PHONES, WORLD WAR, ALIEN INVASION, YOUR GIRLFRIEND CHEATING ON YOU OR ANYTHING!
Welcome to the support thread of Quarx's CM10.1!
[CM10.1] Android Jelly Bean 4.2 (By Quarx)​
What is this thread for:
Here you can report all your problems of the Quarx's CM10.1 that you have and ask for help to see if it's solvable by others methods that doesn't include posting to the original rom thread.
This thread will be easier for him than look for all reports spreaded in the many pages of his thread, but remember, avoid flood!
Before adding your problem(s):
- Be sure to use the latest version of CM10.1! (Check here!)
- Be sure that your report is not already reported by someone, so use the search button.
Take a look here if you wanna know how to install the ROM, and few things like that: FAQ & FAQ 2 from CM10. :good:
BUG LIST:
Kernel 2.6: BT-Headset is a bit buggy, BT will not work if FM is enabled, some problems with 3G, video recording is not good.
Kernel 3.0: Low speed of USB mass-storage, display do not always wake after sleep, suspend not working correctly.
WHAT WORKS?
Kernel 2.6: Almost everything.
Kernel 3.0: SD-Card, Bluetooth, Torch, Leds, USB (all modes), HW Video decoding, Sensors, FM-Radio (only seek stations+RDS), Sound (only speaker).
WHAT DOESN'T WORKS?
Kernel 2.6: BT-Tethering, USB-Tethering
Kernel 3.0: Headset, BT-headset, FM-Radio sound, Phone, GPS, Camera, FM-TX, WiFi.
TIPS:
-Coming from CM7/CM9/CM10? Wipe Data!
-ALL BUILDS WITH KERNEL 3.0 UNTIL FURTHER NOTICE FROM QUARX ARE BUILDS FOR TESTING PURPOSES, SO IT'S NOT READY FOR DAILY USE!
-Need extra internal space? Use an Minimal Gapps! Download here. (Thanks to xinrag for the tip!)

Remember to not have a screenlock with more than 3x3 if u update from previous build , i had and couldnt put it in ...
Did a factory reset then , flashed 4.2 and gapps 4.2 , booted up first run.
Talk to speech crashes several times at first startup , baseband no good (im in Norway), very weak signal

zer0grav1ty said:
Remember to not have a screenlock with more than 3x3 if u update from previous build , i had and couldnt put it in ...
Did a factory reset then , flashed 4.2 and gapps 4.2 , booted up first run.
Talk to speech crashes several times at first startup , baseband no good (im in Norway), very weak signal
Click to expand...
Click to collapse
Quarx recommended on Facebook to wipe data before updating. And like he said, almost everything doesn't work properly. So, not ready for daily use.

update..
Cant find SD card +settings crashes when you try to access storage..
"Quarx recommended on Facebook to wipe data before updating. And like he said, almost everything doesn't work properly. So, not ready for daily use."
True , a bit early for daily use

zer0grav1ty said:
update..
Cant find SD card +settings crashes when you try to access storage..
"Quarx recommended on Facebook to wipe data before updating. And like he said, almost everything doesn't work properly. So, not ready for daily use."
True , a bit early for daily use
Click to expand...
Click to collapse
I also cannt find wifi,,,

Tjunkustc said:
I also cannt find wifi,,,
Click to expand...
Click to collapse
Searching does not work, but you can connect manually. works for me.

Are minimal GAPPS 4.2 out there yet?

@Gafanhotz Good idea to creat a new thread for 4.2 :good:

mitchum67 said:
Searching does not work, but you can connect manually. works for me.
Click to expand...
Click to collapse
For me too....
Sent from my MB526 using xda app-developers app

SD CARD can't be mount
zer0grav1ty said:
update..
Cant find SD card +settings crashes when you try to access storage..
"Quarx recommended on Facebook to wipe data before updating. And like he said, almost everything doesn't work properly. So, not ready for daily use."
True , a bit early for daily use
Click to expand...
Click to collapse
SD CARD can't be mount. me too . Defy MB525

yangvincent said:
SD CARD can't be mount. me too . Defy MB525
Click to expand...
Click to collapse
Quarx will solve that in the next build don't worry. It's not working for anyone. It's just a Demo rom so please wait until master quarx releases a daily usable rom.
Sent from my MB526 using xda premium

New unofficial version
After install some times in nany ways and settings I confirmed that new 4.2 version is good for defy hardware and custom kernel.
I still worry when Quarx2k implements the CM feautures if this is bug the rom.
But now...
1 - With or without gapps (4.2 or 4.1.2) the initial settings show erros.
2 - GSM signal is very weak, but phone tottaly functional.
3 - Widgets are not full sized on screen ( all go to left on screen).
4 - Phone with lot of memory and flows very good.

Where can I download gapps 4.2?

I hope the data dropouts i have in CM10 will be solved in CM10.1 but dont have my hopes up to high because they been there so long now that i dont even know when they started, might have been already on CM9 but im not sure.
Another thing that worries me a bit is that the system space is not big enough while internal storage atleast for me is on over 1GB, possible to make the system space bigger?
Cheers?

morteza-25 said:
Where can I download gapps 4.2?
Click to expand...
Click to collapse
Read the first post of CM10.1 of Quarx2k in Development Section

FlashTec80 said:
I hope the data dropouts i have in CM10 will be solved in CM10.1 but dont have my hopes up to high because they been there so long now that i dont even know when they started, might have been already on CM9 but im not sure.
Another thing that worries me a bit is that the system space is not big enough while internal storage atleast for me is on over 1GB, possible to make the system space bigger?
Cheers?
Click to expand...
Click to collapse
We can't resize system rom, because we have locked bootloader & i think 2ndboot will not help. Solution - unistall not need system apps, hint: unistall CMWallpapers - it will free about 10MB in SROM

Could this app solve the SD problem?
http://forum.xda-developers.com/showthread.php?t=1652079

Gafanhotz said:
Quarx recommended on Facebook to wipe data before updating. And like he said, almost everything doesn't work properly. So, not ready for daily use.
Click to expand...
Click to collapse
can you send me the facebook link? thanks!

sorry for off topic
Why quarx named cm 10.1 as unofficial build but cm 10 is also not official but he dint named it as unofficial builds.

mothy1025 said:
sorry for off topic
Why quarx named cm 10.1 as unofficial build but cm 10 is also not official but he dint named it as unofficial builds.
Click to expand...
Click to collapse
What's the point of this question??
You are in a stupid confusion!
Both are UNOFFICIAL ( Who cares though )
I don't want a tapatalk sig!

Slimbean for Locked Bootloaders built from latest sources

Update Posted September 26 2014:
Numerous fixes and additions:
Added Slimbean Extras including Email, Exchange2, Launcher2, Music2 and VideoEditor
Camera delay is positively fixed - absoultely no delay
Removed FM radio which does not work
Instructions:
I always prefer fresh install.
You may try, if you wish and if you already have the previous version, to flash this on top;
If you are doing fresh install, see original instructions (full wipe).
P.S. When you boot for the first time, you will get:
1. Notificaiton that email app stopped (disregard it, the app will work without any further messages)
2. Notification that SU binary should be updated: follow instructions
Regarding bootloops: Do a fresh install, which is always preferred. Also, remember, custom roms based on Cyanogen want all system apps signed by the same key. If you have SU or any other app that you installed in the system (and then flash update on top) that means that those apps are signed by different keys, which would result in a bootloop during subsequent updates. Do research and learn about not messing with system apps. Neither SU nor any other app needs to be installed in system. Also, the same applies if you decompile and mess with a system app - once you re-compile the app, you'll have to sign it and your key is different, which again means bootloop.
Also remember that this rom is designed to work with Stock JB 4.1.2 kernel only. If you have an unlocked bootloader and custom kernel, you will get bootloop and/or other issues
Before posting this update, I reformatted my phone and did a fresh install: no issues. You know what it means: I don't want to hear about bootloops.
____________________________________________________________________________
Rom checked on my device: boots 100% in about 25 seconds. Just re-uploaded. This might have been an issue of a corrupt upload.
Slimbean latest release built from sources on September 6, 2014. This is for IONs with locked bootloaders. This is not Kitkat, it is based on JB 4.1.2, which is ages more stable.
Changes:
1. Open source Launcher Advanced (one of few open launchers)
2. Terminal and FM radio added (were missing in original release by Olivier)
3. Battery/Wifi fixes incorporated in code prior to building
4. Radio menu fixed (now when you dial *#*#4636#*#* and go to phone, you no longer get F/C)
5. Default network changed to LTE
The phone seems snappier than with the original release, perhaps because the rom was built on Gentoo, which is the best Linux around. But maybe it is just placebo. You decide.
INSTALL INSTRUCTIONS:
1. Be rooted, have Recovery and JB 4.1.2 kernel
2. Enter recovery, wipe System/Data/Cache (remember factory reset is not enough)
3. Flash the rom, reboot and let it settle, which shouldn't take long
4. Enjoy and press thank you or perhaps donate...
CREDIT: Olivier for initial Manifest and Letama/Olivier/MrGezz for locked bootloader patch
XDA:DevDB Information
Slimbean for Locked Bootloaders, ROM for the AT&T Sony Xperia ion
Contributors
optimumpro
ROM OS Version: 4.1.x Jelly Bean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock Kernel JB 4.1.2
Based On: AOSP Slimbean built from source
Version Information
Status: Stable
Stable Release Date: 2014-09-06
Created 2014-09-07
Last Updated 2014-09-11

Pictures

Thanks for the rom. I just flashed it and rebooted.. the screen is stuck on the slimbean logo for over 10 minutes.. the slimbean logo is flashing normally as if its about to load. You think something went wrong and I should interrupt it?
EDIT: So i interrupted after about 12 minutes by holding power and volume up keys and entered twrp to go back to previous rom. Will try back later.

imm1304 said:
Thanks for the rom. I just flashed it and rebooted.. the screen is stuck on the slimbean logo for over 10 minutes.. the slimbean logo is flashing normally as if its about to load. You think something went wrong and I should interrupt it?
EDIT: So i interrupted after about 12 minutes by holding power and volume up keys and entered twrp to go back to previous rom. Will try back later.
Click to expand...
Click to collapse
I'll look into it. Did you do system/cache/data wipe prior to flashing?

Sorry to ask again but can we have INLINE/INVOICE CALL RECORDER like the one seen in your honami ROM. I think it was a part of 0.96w fw jellybean 4.1.2. I really need it and so do others too

optimumpro said:
I'll look into it. Did you do system/cache/data wipe prior to flashing?
Click to expand...
Click to collapse
Did anyone else get stuck on slimbean logo?

Rom re-uploaded: works fine
I checked the rom and it boots on my ION fine. Re-uploaded. This might have been an issue of a corrupt upload.

Downloading, will try tomorrow after school is out. Thank you Optimum you and your damn roms tempt me as much as i tell myself to stick to stock after CM10 had quite a few issues on my end i guess.
Also on a side note if you need mirrors, I can make two or three.

Can we have kitkat like notification quick settings in this rom ?

optimumpro said:
I'll look into it. Did you do system/cache/data wipe prior to flashing?
Click to expand...
Click to collapse
Yup, I wiped system/data/cache and haven't had any problems with flashing other roms before/after this rom.
I see that you re-uploaded.. will give it a try later today. Thank you.

I had the same problem, stuck at the logo. I'll try another download too.

tgilmore16 said:
I had the same problem, stuck at the logo. I'll try another download too.
Click to expand...
Click to collapse
The first download was corrupted and removed. The current one is good.

can someone post the screens please!!

Works Great
optimumpro said:
The first download was corrupted and removed. The current one is good.
Click to expand...
Click to collapse
It's working great now. I installed an Xperia z2 ported launcher and the two together are running fine.

tgilmore16 said:
It's working great now. I installed an Xperia z2 ported launcher and the two together are running fine.
Click to expand...
Click to collapse
What about camera? Have you found a better camera for this rom?

Camera
imm1304 said:
What about camera? Have you found a better camera for this rom?
Click to expand...
Click to collapse
I'm not really a picture taker. Post #3 in this thread has a flashable camera. I'm not sure it would work on this rom, but I would flash it and if it didn't work just do a restore from backup.
http://forum.xda-developers.com/showthread.php?t=2480608

Small Apps
Does anyone low of how I can get small apps back? Although they're not a deal breaker, I actually used a couple of them and would like them back.

tgilmore16 said:
Does anyone low of how I can get small apps back? Although they're not a deal breaker, I actually used a couple of them and would like them back.
Click to expand...
Click to collapse
You can try these:
http://forum.xda-developers.com/showthread.php?t=2066827
But that would go against AOSP nature of this rom.

tgilmore16 said:
I'm not really a picture taker. Post #3 in this thread has a flashable camera. I'm not sure it would work on this rom, but I would flash it and if it didn't work just do a restore from backup.
http://forum.xda-developers.com/showthread.php?t=2480608
Click to expand...
Click to collapse
Thanks, but that camera doesnt work on this rom.. because it needs the honami framework.

Honami Sense AOSP
imm1304 said:
Thanks, but that camera doesnt work on this rom.. because it needs the honami framework.
Click to expand...
Click to collapse
Ok, I'm slowly catching on. I switched from iPhone a couple of months ago and had gotten an HTC One which I unlocked the boot loader, did the S-Off and rooted. I run AOKP on that phone and the xperia was a backup to carry when I'm running or cycling. As it turns out, my wife's iPhone is messing up so I've put a sense rom back on the One. She likes getting that feed screen and all. Now the Xperia is my main phone. I guess Honami is the Sony equivalent of proprietary like sense is to HTC.
I've found I like the Sony's and will probably replace the HTC with a Z1 or Z1 compact but I need to do some research as unlocking the boot loader is a requirement. It wasn't so important on the ion due to its purpose, plus I couldn't find an I or H at a reasonable price.
I realize I've gotten wordy and a touch off topic and apologize.
I'll keep my eyes out for a camera and as for the multi tasking, I forgot there's an xposed app that may allow some multi tasking.
I really do appreciate the ROM and am especially grateful to the dev of this rom for making it usable on a locked boot loader.

x9076 with R63419 LCD working recoveries

TWRP 2.7.1.0 , stock revovery (v1.2), unlocked recovery (original by wmjan)
hope there will be some custom roms for this LCD soon...

tonyjih said:
TWRP 2.7.1.0 , stock revovery (v1.2), unlocked recovery (original by wmjan)
hope there will be some custom roms for this LCD soon...
Click to expand...
Click to collapse
Could you please explain the difference between these 3 recoveries?

GaroRobe said:
Could you please explain the difference between these 3 recoveries?
Click to expand...
Click to collapse
they both for newer model of find7 comes with a newer screen
You'll need these recoveries ONLY if you own a R63419+ LCD model
reference:
http://www.oppoforums.com/threads/r63419-cannot-install-3rd-party-rec-rom.24924/

tonyjih said:
they both for newer model of find7 comes with a newer screen
You'll need these recoveries ONLY if you own a R63419+ LCD model
reference:
http://www.oppoforums.com/threads/r63419-cannot-install-3rd-party-rec-rom.24924/
Click to expand...
Click to collapse
1. The "*##*37847#" method doesn't work for me since I'm on 1.2.8i , thus cannot verify the screen model
2. My phone is x9076 int'l, manufactured in december 2014
3. I have the "bleached screen" bug on 3rd party ROMs and namelessTWRPs
4. The twrp-x9076 takes only half of a screen area (it does work though, but still identifies my phone as find7a which is incorrect)
5. you still didn't describe the difference between the other two

I tried flashing CM12 nightly with twrp-x9076 (had to remove assert from update script). No good - same as before, bleached screen and such. So this particular recovery seems to be useless for anything other than backup/restore and rooting (which is awesome, but still not what I'd like to have access to).

GaroRobe said:
I tried flashing CM12 nightly with twrp-x9076 (had to remove assert from update script). No good - same as before, bleached screen and such. So this particular recovery seems to be useless for anything other than backup/restore and rooting (which is awesome, but still not what I'd like to have access to).
Click to expand...
Click to collapse
you have to wait CM update their drivers , otherwise it just .... don't work.

I also have an issue with this and have installed this recovery and its fixed the problem. Now we wait for custom ROM developers to catch on.... I'm going to keep myself glued to cyanogen to see if they change anything!

sof006 said:
I also have an issue with this and have installed this recovery and its fixed the problem. Now we wait for custom ROM developers to catch on.... I'm going to keep myself glued to cyanogen to see if they change anything!
Click to expand...
Click to collapse
Same here. Other than the official beta rom there seems to be nothing available for us. I am seriously considering returning the Oppo since I can't even get hold of 1.2.8i (only stable version which ships with the phone).

So sad... I really want to use 5.0 on my OPPO Find 7. I've reached out to Cyanogen but had no replies, reached out to other ROM developers only to either be ignored or have my question washed away by a sea of people complaining that they can't get a game to work on their phone.

Just found out that cyanogen is working on the new oppo find 7 with new lcd panel issue. So anyone disappointed they'll have it sorted soon hopefully!

Does the offical TWRP and CM support this find7 with new LCD????

Any updates on this? I have managed to get the official AOSP ROM working but nothing else unfortunately.

Double the question. Lack of working TWRP is just fatal to any tinkering.

GaroRobe said:
1. The "*##*37847#" method doesn't work for me since I'm on 1.2.8i , thus cannot verify the screen model [...]
Click to expand...
Click to collapse
Test with adb (requires root):
Code:
adb devices
adb shell
su
cat /proc/devinfo/lcd
the answer for me (X9006 with COS 2.0.8i) is
Code:
Device version: R63417
Device manufacture: JDI
close the shell
Code:
exit
exit

Maybe if the ROM is compiled from source, the extra driver could be included? I am noob to this so if someone experienced could take a look that'd be great!

Just found this thread and didn't read much.
I am on unified storage (stock 2.0.8I). Are these recoveries compatible (unified partition)?
And yes, I have the new LCD screen...
Thanks

betoNL said:
Just found this thread and didn't read much.
I am on unified storage (stock 2.0.8I). Are these recoveries compatible (unified partition)?
And yes, I have the new LCD screen...
Thanks
Click to expand...
Click to collapse
Yes they are compatible with LVM, using it with the official AOSP rom since it's been the only way for me to get Lollipop so far, will probably test out the new beta ColorOS 2.1 Lollipop ROM as well.
EDIT: Actually just noticed some issues with it, can't mount internal_sd or data partitions and thus can't back up, avoid. I thought I'd backed up on LVM but clearly not.
Speaking of ROMs... I've taken the screen driver of the original Oppo kernel from the github and added it to the cm12.1 kernel (ie overwritten the cm12 driver with the Oppo one), I'm now compiling it from source and will report back if this works. If so, this will mean working Cyanogenmod for the new panel!

djzic said:
Yes they are compatible with LVM, using it with the official AOSP rom since it's been the only way for me to get Lollipop so far, will probably test out the new beta ColorOS 2.1 Lollipop ROM as well.
EDIT: Actually just noticed some issues with it, can't mount internal_sd or data partitions and thus can't back up, avoid. I thought I'd backed up on LVM but clearly not.
Speaking of ROMs... I've taken the screen driver of the original Oppo kernel from the github and added it to the cm12.1 kernel (ie overwritten the cm12 driver with the Oppo one), I'm now compiling it from source and will report back if this works. If so, this will mean working Cyanogenmod for the new panel!
Click to expand...
Click to collapse
Ok thanks,
I am on stock 2.0.8i with unified storage and gonna have a look on some CM / AOSP based roms soon ...
.

betoNL said:
Ok thanks,
I am on stock 2.0.8i with unified storage and gonna have a look on some CM / AOSP based roms soon ...
.
Click to expand...
Click to collapse
Edit I did a backup of the stock recovery (2.0.8i) with Flashify app for instance so I think I am going to try this out anyway ....

Twrp cant seen to find my internal storage. Im using unified storage setting on colorOS 2.1

ROM for c1904

:fingers-crossed:I am really new in th3 world of phone development.Please sugggest me a suitable ROM for C1904 ,which donot cause any problem like bootloop,no sim card detection,no imei problem post flashing coz i would have no idea to solve it.
cwm recovery installed.

No roms cause bootloop if you install it correctly
Try all the roms one by one then choose the best rom for you.
suggestions - Enfriar Z5, StryFlex™ LP, Resurrection Remix KK & LP, Znxt Evolution

you shouldn't use enfiar or stryfles cause they are based on cm12.1 and on my xperia m were very messed up, try a clean CM12.1 it is still a nightly (beta) but is suitable for a daily workload. Every problem you have with it should be fixed fast because nighlies have a something like a daily update schedule, you can check every update change log on cmxlog, and submit problems directly to them. with those sony like ports (stryflex, enfiar) every cm update could have another bug with those ports and even not work. I personally really like the clean look of material design. Another really big plus is storage becouse you don't have to install all of sony bloatware and even gapps. CM would be a great choice if you ask me here's a link https://download.cyanogenmod.org/?device=nicki if you want any help with installing it im here to answer every question

Thanks I really hate all those Sony pre installed apps

cakeforcat said:
you shouldn't use enfiar or stryfles cause they are based on cm12.1 and on my xperia m were very messed up, try a clean CM12.1 it is still a nightly (beta) but is suitable for a daily workload. Every problem you have with it should be fixed fast because nighlies have a something like a daily update schedule, you can check every update change log on cmxlog, and submit problems directly to them. with those sony like ports (stryflex, enfiar) every cm update could have another bug with those ports and even not work. I personally really like the clean look of material design. Another really big plus is storage becouse you don't have to install all of sony bloatware and even gapps. CM would be a great choice if you ask me here's a link https://download.cyanogenmod.org/?device=nicki if you want any help with installing it im here to answer every question
Click to expand...
Click to collapse
which recovery should i use twrp or cwm.

twrp is touch driven so should be easier to use and in cwm (but it probably was some kind of custom/old version) i haven't seen an option to wipe dalvik cache. And if you install cm with it's own kernel you get cm recovery(not cwm but cm!) but it's very easy to install twrp via app in play store (but you must enable root in settings/developer settings/root access)

Installed with cwm.

Hi friend can U suggest good camera app for CM 12.1 (Xperia M) ? or Link of ported stock camera app ?

Will we have a Custom Marshmallow (Android 6.X.X) for Xperia ZL?

One of the best features of 6.0 is the SD use as domestic, I'm on my tablet and is very helpful. It comes to hardware, the Xperia ZL has power to spare to run the Marshmallow.
However, I saw nothing official and unofficial nothing yet, OmniRom being AOSP, CM13, Resurrection, Paranoid, Omega, Exodus, etc ... In other words, it seems that no one is working on it, which I think is a shame, such a good player.
But still have a glimmer of hope, someone knows something, it is planned, expectation of a Custom ROM?:good:
:fingers-crossed:

Just wait
Hi,
it will be a MM Rom from Sony,
just wait !
What about NEXUS 4, almost the
same Hardware, PLATFORM !
Maybe some MODDER can take
a look at this CM 13 release of the Nexus.
greets

Truth!
By the same hardware of the Nexus, there is hope that we Android 6

Sweet. But my ZL is dying. I'm still on KK, hoping L fixes media server battery drain bug.

juniorhxcx said:
One of the best features of 6.0 is the SD use as domestic, I'm on my tablet and is very helpful. It comes to hardware, the Xperia ZL has power to spare to run the Marshmallow.
However, I saw nothing official and unofficial nothing yet, OmniRom being AOSP, CM13, Resurrection, Paranoid, Omega, Exodus, etc ... In other words, it seems that no one is working on it, which I think is a shame, such a good player.
But still have a glimmer of hope, someone knows something, it is planned, expectation of a Custom ROM?:good:
:fingers-crossed:
Click to expand...
Click to collapse
http://forum.xda-developers.com/xperia-zl/general/testers-resurrection-remix-m-odin-t3337025
Check this link. It's a fresh new Marshmallow rom. Didn't try it, yet, so flash at your risk. The developer needs our support, so... YAY!

ninguem98 said:
http://forum.xda-developers.com/xperia-zl/general/testers-resurrection-remix-m-odin-t3337025
Check this link. It's a fresh new Marshmallow rom. Didn't try it, yet, so flash at your risk. The developer needs our support, so... YAY!
Click to expand...
Click to collapse
What great news!
Thank you very much!

A bad news, dev of CM12.1 likely gave ZL up.
He didn't update anything about kernel, libs, blobs, drivers or some device fix.
Even ZL hasn't had TWRP v3 yet...
Now we know all the Sony device facing camera issue.
Then no dev, no new rom. :crying:

Dragonkind said:
A bad news, dev of CM12.1 likely gave ZL up.
He didn't update anything about kernel, libs, blobs, drivers or some device fix.
Even ZL hasn't had TWRP v3 yet...
Now we know all the Sony device facing camera issue.
Then no dev, no new rom. :crying:
Click to expand...
Click to collapse
As the maintainer of the Xperia ZL I do not know, but we continue to have in the Builds Nightlys:
https://download.cyanogenmod.org/?device=odin
And we already have the TWRP v3.0
https://dl.twrp.me/odin/
If I'm not mistaken, the Phill already updated the Dual recovery as well.
The problem of camera I do not know what it is, what happens? (I'm not using a lot).

juniorhxcx said:
As the maintainer of the Xperia ZL I do not know, but we continue to have in the Builds Nightlys:
https://download.cyanogenmod.org/?device=odin
And we already have the TWRP v3.0
https://dl.twrp.me/odin/
If I'm not mistaken, the Phill already updated the Dual recovery as well.
The problem of camera I do not know what it is, what happens? (I'm not using a lot).
Click to expand...
Click to collapse
Oh, I'm using TWP v3 now. Thank u for telling me! :highfive:
Though we are supported by CM, we can only get CM general update. We have several device/kernel issues, they won't be solved anymore unless there's someone continues to maintain the project and not only let it get cross-device updates of CM.
As I know, we have these issues:
1. HDR camera isn't here.
2. Live Display can't switch back to day mode from night mode in automatic.
3. Not smooth about graphic, my friend's HTC Butterfly is better.
4. The lowest brightness isn't the real lowest (1%), in fact it's about 20% of brightness.
5. I'm surprised that we use ondemand as our default governor…
Click to expand...
Click to collapse
I hope these can be solved in Resurrection Remix M.
I don't expect too much about CM12.1 now.
Even few people discuss about it…

OmniROM
http://dl.omnirom.org/odin/