TWRP 2.7.1.0 , stock revovery (v1.2), unlocked recovery (original by wmjan)
hope there will be some custom roms for this LCD soon...
tonyjih said:
TWRP 2.7.1.0 , stock revovery (v1.2), unlocked recovery (original by wmjan)
hope there will be some custom roms for this LCD soon...
Click to expand...
Click to collapse
Could you please explain the difference between these 3 recoveries?
GaroRobe said:
Could you please explain the difference between these 3 recoveries?
Click to expand...
Click to collapse
they both for newer model of find7 comes with a newer screen
You'll need these recoveries ONLY if you own a R63419+ LCD model
reference:
http://www.oppoforums.com/threads/r63419-cannot-install-3rd-party-rec-rom.24924/
tonyjih said:
they both for newer model of find7 comes with a newer screen
You'll need these recoveries ONLY if you own a R63419+ LCD model
reference:
http://www.oppoforums.com/threads/r63419-cannot-install-3rd-party-rec-rom.24924/
Click to expand...
Click to collapse
1. The "*##*37847#" method doesn't work for me since I'm on 1.2.8i , thus cannot verify the screen model
2. My phone is x9076 int'l, manufactured in december 2014
3. I have the "bleached screen" bug on 3rd party ROMs and namelessTWRPs
4. The twrp-x9076 takes only half of a screen area (it does work though, but still identifies my phone as find7a which is incorrect)
5. you still didn't describe the difference between the other two
I tried flashing CM12 nightly with twrp-x9076 (had to remove assert from update script). No good - same as before, bleached screen and such. So this particular recovery seems to be useless for anything other than backup/restore and rooting (which is awesome, but still not what I'd like to have access to).
GaroRobe said:
I tried flashing CM12 nightly with twrp-x9076 (had to remove assert from update script). No good - same as before, bleached screen and such. So this particular recovery seems to be useless for anything other than backup/restore and rooting (which is awesome, but still not what I'd like to have access to).
Click to expand...
Click to collapse
you have to wait CM update their drivers , otherwise it just .... don't work.
I also have an issue with this and have installed this recovery and its fixed the problem. Now we wait for custom ROM developers to catch on.... I'm going to keep myself glued to cyanogen to see if they change anything!
sof006 said:
I also have an issue with this and have installed this recovery and its fixed the problem. Now we wait for custom ROM developers to catch on.... I'm going to keep myself glued to cyanogen to see if they change anything!
Click to expand...
Click to collapse
Same here. Other than the official beta rom there seems to be nothing available for us. I am seriously considering returning the Oppo since I can't even get hold of 1.2.8i (only stable version which ships with the phone).
So sad... I really want to use 5.0 on my OPPO Find 7. I've reached out to Cyanogen but had no replies, reached out to other ROM developers only to either be ignored or have my question washed away by a sea of people complaining that they can't get a game to work on their phone.
Just found out that cyanogen is working on the new oppo find 7 with new lcd panel issue. So anyone disappointed they'll have it sorted soon hopefully!
Does the offical TWRP and CM support this find7 with new LCD????
Any updates on this? I have managed to get the official AOSP ROM working but nothing else unfortunately.
Double the question. Lack of working TWRP is just fatal to any tinkering.
GaroRobe said:
1. The "*##*37847#" method doesn't work for me since I'm on 1.2.8i , thus cannot verify the screen model [...]
Click to expand...
Click to collapse
Test with adb (requires root):
Code:
adb devices
adb shell
su
cat /proc/devinfo/lcd
the answer for me (X9006 with COS 2.0.8i) is
Code:
Device version: R63417
Device manufacture: JDI
close the shell
Code:
exit
exit
Maybe if the ROM is compiled from source, the extra driver could be included? I am noob to this so if someone experienced could take a look that'd be great!
Just found this thread and didn't read much.
I am on unified storage (stock 2.0.8I). Are these recoveries compatible (unified partition)?
And yes, I have the new LCD screen...
Thanks
betoNL said:
Just found this thread and didn't read much.
I am on unified storage (stock 2.0.8I). Are these recoveries compatible (unified partition)?
And yes, I have the new LCD screen...
Thanks
Click to expand...
Click to collapse
Yes they are compatible with LVM, using it with the official AOSP rom since it's been the only way for me to get Lollipop so far, will probably test out the new beta ColorOS 2.1 Lollipop ROM as well.
EDIT: Actually just noticed some issues with it, can't mount internal_sd or data partitions and thus can't back up, avoid. I thought I'd backed up on LVM but clearly not.
Speaking of ROMs... I've taken the screen driver of the original Oppo kernel from the github and added it to the cm12.1 kernel (ie overwritten the cm12 driver with the Oppo one), I'm now compiling it from source and will report back if this works. If so, this will mean working Cyanogenmod for the new panel!
djzic said:
Yes they are compatible with LVM, using it with the official AOSP rom since it's been the only way for me to get Lollipop so far, will probably test out the new beta ColorOS 2.1 Lollipop ROM as well.
EDIT: Actually just noticed some issues with it, can't mount internal_sd or data partitions and thus can't back up, avoid. I thought I'd backed up on LVM but clearly not.
Speaking of ROMs... I've taken the screen driver of the original Oppo kernel from the github and added it to the cm12.1 kernel (ie overwritten the cm12 driver with the Oppo one), I'm now compiling it from source and will report back if this works. If so, this will mean working Cyanogenmod for the new panel!
Click to expand...
Click to collapse
Ok thanks,
I am on stock 2.0.8i with unified storage and gonna have a look on some CM / AOSP based roms soon ...
.
betoNL said:
Ok thanks,
I am on stock 2.0.8i with unified storage and gonna have a look on some CM / AOSP based roms soon ...
.
Click to expand...
Click to collapse
Edit I did a backup of the stock recovery (2.0.8i) with Flashify app for instance so I think I am going to try this out anyway ....
Twrp cant seen to find my internal storage. Im using unified storage setting on colorOS 2.1
Related
it was funny how I realized mine was the new version now
I made this thread here so you guys can discuss, this is for information to others who have gotten the new elephone
1) How do we get root ?
No, there isnt any proper recovery last @Emileh ported it did not work very well you are able to flash it the recovery but you are unable to boot back into the system it just stuck at the elephone logo.
2) as of now we only have one rom that has been up here and running K06TE-A.A.vR14.E1.160707 (2016 Version)
K05TS-A.A.vR1E.E2.160217 (2015 Version)
3) cosmetic mixed up (happens alot on chinese phone)
my front is the old 2015 version cover but my back is the new fingerprint cover (possible you can confirm with that is the new elephone you have if you are not sure.
4) so no root and no cyanogenmod and no recovery ?
as of now Im not sure about root, cause I did tried to flash recovery from @Emileh but I could not boot back to android os, so we cant flash supersu,
kingroot and others dont work !
also there some memory layout changed, so it will render the android 5.1 roms useless, please dont try unless you know what you are doing and know how to recover from mediatek usb port
5) will CyanogenMod 13 work ?
to be honest we need a fully working recovery.
maybe there can explain and clear anything more that I left out, I have just gotten the phone
@skeleton1911 @BlueFlame4 @Emileh @Deepflex
somehelp would be nice. thanks would be nice to get cm13 for both the 2015 and 2016 working
Hey,
well the 2015 and 2016 versions are basically two different devices - despite having the same name they share very little. A unified CM 13 build is thus not only difficult to establish but I would even say that it makes things more complex than developing two single versions. That said, CM 13 for the 2016 should be rather easy to bring up because it ships with 6.0. Basically you could take Deepflex's P9000 tree, change it according to the 2016_P8000 and boom - should work. With that you can then of course also compile a working recovery to achieve root That's the theory at least
Is that so but we have yet to achive root and figure out what is the internal changes between those two? Maybe @Deepflux can lend a helping hand in this wish you could help out @BlueFlame4, cause I finally had the money to get this phone possible if you could look into the recovery issue on why it does not boot after flashing it aka bootloop at elephone logo
** Attempted to Port and it does not work. did repack twice.
Hey. Just saw this topic.
I made a better version of the recovery (but forgot to post it), which is actually able to flash roms. It now also mounts everything properly. Flashing root on stock rom works 100%. (only thing not working in ADB, I think).
I will upload it later.
Problem is, there are no roms (expect stock, which you flash using SP Flash Tools). You can't flash the roms that other have made for the old version of the phone. Doesn't work like that.
Emileh said:
Hey. Just saw this topic.
I made a better version of the recovery (but forgot to post it), which is actually able to flash roms. It now also mounts everything properly. Flashing root on stock rom works 100%. (only thing not working in ADB, I think).
I will upload it later.
Problem is, there are no roms (expect stock, which you flash using SP Flash Tools). You can't flash the roms that other have made for the old version of the phone. Doesn't work like that.
Click to expand...
Click to collapse
yeah @BlueFlame4
mention something about cyanogenmod from @Deepflex, could it be this ?
https://github.com/Deepflex/android_device_elephone_p8000/commits/master
hopefully we can get cyanogenmod working, possible if you release the recovery ? is it TWRP ?
Zenns said:
yeah @BlueFlame4
mention something about cyanogenmod from @Deepflex, could it be this ?
https://github.com/Deepflex/android_device_elephone_p8000/commits/master
hopefully we can get cyanogenmod working, possible if you release the recovery ? is it TWRP ?
Click to expand...
Click to collapse
I was talking about this. You have to adapt it to the P8000 and have to use a 3.18 kernel (+ M blobs) though.
there isnt any 3.18 kernel that was released right ? m blobs can be extracted question is why won't your cm13.1 work on the new elephone ? memory changes ? it is still same soc right or there is something different quite confused.
Bump
Hi, I'm not sure if it's the right section where to post such a thread but I didn't found a better one for my problem.
I flashed lineage-14.1-20170213-nightly-find7s-signed.zip on my rooted Find 7 (2k version so Find 7s) with TWRP following all the standard steps (full wipe, ROM and gapps install, wipe cache/dalvik and than reboot).
Than when the ROM flash was finished (it took not as much as I thought) I rebooted and my screen become white with a grey OPPO logo in the middle and purple "powered by android" at the bottom (the usual power up screen but with inverted colors) and when I touch the screen it makes quick flashes with flashing black horizontal lines and it keeps being stuck in that way for minutes (way too much and it keeps doing that also after many reboots). The only way to recover the phone is to flash again Color OS (Android 5.0).
So i was wondering what's the problem with that ROM? How can i upgrade my old Android 5.0 to a newer 6.x or 7.x? Is there any rock solid ROM compatible with my F7s that I can flas with no such problems ?
Thankyou all for help!
OmniROM 6 is a mature and solid daily driver with the option to try OmniROM 7 which is still being improved regularly. Arguably the best ROM for Find 7.
RobboW said:
OmniROM 6 is a mature and solid daily driver with the option to try OmniROM 7 which is still being improved regularly. Arguably the best ROM for Find 7.
Click to expand...
Click to collapse
It also has LVM support which allows you to merge your partitions so you will have more than 3gb of space for apps.
I've been running it for months, there are a few things that I miss from previous roms but is very stable and since this phone is getting old the ROM choices are getting slim. It's also the only one I can find that still supports LVM.
RobboW said:
OmniROM 6 is a mature and solid daily driver with the option to try OmniROM 7 which is still being improved regularly. Arguably the best ROM for Find 7.
Click to expand...
Click to collapse
_Clint-Beastwood_ said:
It also has LVM support which allows you to merge your partitions so you will have more than 3gb of space for apps.
I've been running it for months, there are a few things that I miss from previous roms but is very stable and since this phone is getting old the ROM choices are getting slim. It's also the only one I can find that still supports LVM.
Click to expand...
Click to collapse
Thankyou both for helping me I found a list of omnirom ROMs in this thread https://forum.xda-developers.com/find-7/orig-development/omni-testbuilds-7a-7s-t3237065 , can i choose one of the last 6.0.1 to be sure it will work or can I trust the 7.1.1 updates?
You can trust both! And im not a hyper flashholic....
Just another few questions, LVM means that i can unify partitions in order to have more than 3 GB on device memory, right? I found that thread https://forum.xda-developers.com/showpost.php?p=55187001&postcount=558 is it better to use the .iso or the .zip to apply LVM? And when do I have to apply the LVM setup, before or after flashing the new ROM/Gapps?
Thanks again
Frank_Z said:
Just another few questions, LVM means that i can unify partitions in order to have more than 3 GB on device memory, right? I found that thread https://forum.xda-developers.com/showpost.php?p=55187001&postcount=558 is it better to use the .iso or the .zip to apply LVM? And when do I have to apply the LVM setup, before or after flashing the new ROM/Gapps?
Thanks again
Click to expand...
Click to collapse
Flash the setuplvm zip file in twrp BEFORE flashing ROM and gapps
Guys, thanks to all of you! Really, you all made my day with all your advices
With past ROMs i was desperate because none of them worked but now i got rooted android 7.1.1 with merged partitions on my dear Find 7 so thanks again for helping me!
I recently purchased an tab S4 just an update from my previous Samsung tablet. I was wondering is there more ROMs for this tablet or ROMs currently in development? I noticed theres like 2 ROMs for this tablet. I have a note 8 and I'm currently running deluxerom on and it, and I really enjoy the tweaks and customization I'm able to do. I was looking for a same kind of feature for my tablet. Would greatly appreciate the answers I'm looking for. Thanks!
Mkami said:
I recently purchased an tab S4 just an update from my previous Samsung tablet. I was wondering is there more ROMs for this tablet or ROMs currently in development? I noticed theres like 2 ROMs for this tablet. I have a note 8 and I'm currently running deluxerom on and it, and I really enjoy the tweaks and customization I'm able to do. I was looking for a same kind of feature for my tablet. Would greatly appreciate the answers I'm looking for. Thanks!
Click to expand...
Click to collapse
Pretty much zero support. You can get a few 9.0 GSI ROMs to boot, but they all have issues. Mine has been sitting around since it was purchased while still using my old 2014 model.
veekay said:
Pretty much zero support. You can get a few 9.0 GSI ROMs to boot, but they all have issues. Mine has been sitting around since it was purchased while still using my old 2014 model.
Click to expand...
Click to collapse
Aww no way!? Really? I excitingly got this tablet cause of the features and thought perhaps there would be amazing ROMs for this particular tablet, but I guess not xD What are GSI ROMs? Also as a desperate attempt would other tablet ROMs work on this s4? Thanks mate!
Mkami said:
Aww no way!? Really? I excitingly got this tablet cause of the features and thought perhaps there would be amazing ROMs for this particular tablet, but I guess not xD What are GSI ROMs? Also as a desperate attempt would other tablet ROMs work on this s4? Thanks mate!
Click to expand...
Click to collapse
I had thought the same thing, but it seems the S3 is the last tablet to get real support.
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Some of the ones for 9 will work, but most features won't work too well, if at all.
You might be able to get another rom to work, I know I had no luck. Even trying ones with similar hardware, they all failed to even flash since the booting numbers are different.
Kind of have to be satisfied with Samsung, half baked custom roms or sell the thing.
Mkami said:
Aww no way!? Really? I excitingly got this tablet cause of the features and thought perhaps there would be amazing ROMs for this particular tablet, but I guess not xD What are GSI ROMs? Also as a desperate attempt would other tablet ROMs work on this s4? Thanks mate!
Click to expand...
Click to collapse
First,download "Treble Check" app from playstore & read for your device...
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
(Some GSIs roms are not compatible with some devices!)
veekay said:
I had thought the same thing, but it seems the S3 is the last tablet to get real support.
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Some of the ones for 9 will work, but most features won't work too well, if at all.
You might be able to get another rom to work, I know I had no luck. Even trying ones with similar hardware, they all failed to even flash since the booting numbers are different.
Kind of have to be satisfied with Samsung, half baked custom roms or sell the thing.
Click to expand...
Click to collapse
Hey Veekay I tried it and you're right unfortunately I came across the same issue as you brother
Now I'm stuck and I need help sorting my device out, was wondering if you knew this issue or could help?
When I got the stock firmware back and then when I flash TWRP with odin after going into TWRP I get 0mb as internal
so when I format and then go back into my load up the screen after SAMSUNG says "verification failed" and then reset
on the bottom. I tried other options as well. Without even wiping on TWRP the devices boots up into the setup wizard for the firmware fine
but after I wipe TWRP so I can get access to my internal drive my samsung boots into that verification reset screen. Got any clue as to how I can
resolve this issue? Thanks a bunch!
daitalos said:
First,download "Treble Check" app from playstore & read for your device...
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
(Some GSIs roms are not compatible with some devices!)
Click to expand...
Click to collapse
Hey! Thanks for your reply, will this work for PIE? I can't downgrade from PIE to OREO
and I don't know if GSI even works properly on my device
Mkami said:
Hey Veekay I tried it and you're right unfortunately I came across the same issue as you brother
Now I'm stuck and I need help sorting my device out, was wondering if you knew this issue or could help?
When I got the stock firmware back and then when I flash TWRP with odin after going into TWRP I get 0mb as internal
so when I format and then go back into my load up the screen after SAMSUNG says "verification failed" and then reset
on the bottom. I tried other options as well. Without even wiping on TWRP the devices boots up into the setup wizard for the firmware fine
but after I wipe TWRP so I can get access to my internal drive my samsung boots into that verification reset screen. Got any clue as to how I can
resolve this issue? Thanks a bunch!
Click to expand...
Click to collapse
Have you tried just reloading the latest stock firmware from scratch?
Yup, its unfortunate that there isn't much community support for this device. The Tab S4 is Project Treble supported and a few GSI ROMS do work. But as others have said they are unstable and not for use as a daily driver. We have a few discussion threads here talking about them.
veekay said:
Have you tried just reloading the latest stock firmware from scratch?
Click to expand...
Click to collapse
Would that work? If I did that I would still be able to download and install TWRP and have a root? Because of it being PIE
UndeadAnarchy said:
Yup, its unfortunate that there isn't much community support for this device. The Tab S4 is Project Treble supported and a few GSI ROMS do work. But as others have said they are unstable and not for use as a daily driver. We have a few discussion threads here talking about them.
Click to expand...
Click to collapse
I am going to do more research on these projects because I really wish there was more ROMs its quite an amazing tablet but the potential with the stock ROM lacks a lot
Mkami said:
Hey! Thanks for your reply, will this work for PIE? I can't downgrade from PIE to OREO
and I don't know if GSI even works properly on my device
Click to expand...
Click to collapse
Generic System Image (GSI) list :
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
you can try only "Android 9 Pie" official or unofficial gsi roms..
and remember ! Some GSIs roms maybe are not compatible with some devices! you can ask for your device on each thread
(for example look here): https://github.com/phhusson/treble_experimentations/issues/777
(usually this Gsi aosp 9 phh, generally works on most devices...BUT! ask first,and discuss it in the thread)
https://forum.xda-developers.com/pr...vice-development/aosp-9-0-phh-treble-t3831915
daitalos said:
Generic System Image (GSI) list :
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
you can try only "Android 9 Pie" official or unofficial gsi roms..
and remember ! Some GSIs roms maybe are not compatible with some devices! you can ask for your device on each thread
(for example look here): https://github.com/phhusson/treble_experimentations/issues/777
(usually this Gsi aosp 9 phh, generally works on most devices...BUT! ask first,and discuss it in the thread)
https://forum.xda-developers.com/pr...vice-development/aosp-9-0-phh-treble-t3831915
Click to expand...
Click to collapse
Can I do this without stock ROM and only TWRP? Because having the stock ROM is disabling my twrp to function without wiping and if I wipe than my stock ROM doesn't work
Thanks!
Mkami said:
Can I do this without stock ROM and only TWRP? Because having the stock ROM is disabling my twrp to function without wiping and if I wipe than my stock ROM doesn't work
Thanks!
Click to expand...
Click to collapse
Sorry,but I don't understand what do you mean " without stock rom and only twrp"...
you can install a Gsi rom, with two ways
Via TWRP, or Via Fastboot : https://www.xda-developers.com/flash-generic-system-image-project-treble-device/ (Tab S4 is a-only arm64)
for any other question, it is better to ask in the thread : https://forum.xda-developers.com/pr...vice-development/aosp-9-0-phh-treble-t3831915
(read carefully in OP & you can post,every single question there for your device,and you will get certainly help from the developer or from any other user..)
Mkami said:
Can I do this without stock ROM and only TWRP? Because having the stock ROM is disabling my twrp to function without wiping and if I wipe than my stock ROM doesn't work
Thanks!
Click to expand...
Click to collapse
You are going to have to just wipe it and start over from square one, unless you made a TWRP backup before starting all of this.
Download and flash the latest stock rom from recovery and then you can load twrp again.
I was looking at the possibility of using GSI's on some devices, and while they can offer new life to older devices, they're not entirely stable all the time unless you're willing to make your own changes. I know Lineage has made some excellent progress, but it's not fullproof yet and I wouldn't try it unless you're willing to not use your device as a daily use device.
I had an extra T-Mobile Revvlry which is basically a rebranded Moto g7 Play that I installed the Lineage GSI image and it works fairly well. However, this is more the exception to the rule and Moto devices, I feel, are far simpler in design vs certain Samsung devices. It also had a ton of trial and error involved for me to get it up and running properly.
Is it possible as the s4 becomes older, more people buy it and Samsung stops releasing official updates that someone will come along and create a ROM for it? Or is it more like Samsung locked the bootloaders and its close to impossible to write a ROM for it? Is it still possible to root the s4?
slipnslider said:
Is it possible as the s4 becomes older, more people buy it and Samsung stops releasing official updates that someone will come along and create a ROM for it? Or is it more like Samsung locked the bootloaders and its close to impossible to write a ROM for it? Is it still possible to root the s4?
Click to expand...
Click to collapse
Read very carefully without rush ! for " WETA Kernel + Encryption disabler " etc
especially, read the user comments carefully, and ask on the thread for any questions you have..
https://forum.xda-developers.com/galaxy-tab-s4/development/recovery-twrp-3-3-0-sm-t83x-t3928278 (Pie version)
https://forum.xda-developers.com/showpost.php?p=79483624&postcount=2
https://forum.xda-developers.com/galaxy-tab-s4/how-to/guide-sm-t83x-twrp-magisk-t4059227
( Newest Odin v3.14.4 is there : https://dl2018.sammobile.com/Odin3-v3.14.4.zip )
Thanks. I took a quick peak at the roms and kernels in the roms and kernels forum and they are pretty much all abandoned.
Someone did mention that the LOS 16.0 and ArrowOS GSI's work alright but are a bit buggy.
slipnslider said:
Thanks. I took a quick peak at the roms and kernels in the roms and kernels forum and they are pretty much all abandoned.
Someone did mention that the LOS 16.0 and ArrowOS GSI's work alright but are a bit buggy.
Click to expand...
Click to collapse
samsung,maybe at the end of july to give the upgrade to android 10....it is very likely to happen I think
yes,all Gsi Roms still have various problems unfortunately...
my opinion is: stay to stock rom for now....you can "uninstall" many applications if you want & without root, via "samsung package disabler"(paid) from playstore, or with this way:
https://beebom.com/how-remove-bloatware-android-without-root/
also,you can Install "NiceLock Downloader Companion App" ,to add some features on your device : https://forum.xda-developers.com/galaxy-note-9/themes/nicelock-module-download-links-module-t3923844
with this way I operate my device until now..
Hey
I was just wondering why there is not that many custom roms.
I come from a pocoophone and there was nearly daily new roms .
- not a lot of devs have this device
- people that do have this device don't have resources to build
- check telegram, there are roms, just ask around
Lossyx said:
- not a lot of devs have this device
- people that do have this device don't have resources to build
- check telegram, there are roms, just ask around
Click to expand...
Click to collapse
So you are saying that there are more roms for 7T than just these which are listed on XDA forum? Could you share some links to these telegram groups? Thx
pesa44 said:
So you are saying that there are more roms for 7T than just these which are listed on XDA forum? Could you share some links to these telegram groups? Thx
Click to expand...
Click to collapse
I don't know any specific, but I see them all the time. You can try joining 7/T series discussion group and ask what ROM people are using, and ask in kernel chats (that is specific to oneplus devices of course)
InvolveX said:
Hey
I was just wondering why there is not that many custom roms.
I come from a pocoophone and there was nearly daily new roms .
Click to expand...
Click to collapse
No hype, no sales, no development.
I bet OnePlus 6/6T is having more ROMs
Kind of wondered the same thing, also coming from a pocophone. I had planned to go custom, but now question if it is even worth it as there seems to be little support. I haven't run non-aosp on a phone in forever.
---------- Post added at 12:02 AM ---------- Previous post was at 12:01 AM ----------
Also curious how you find these groups - only thing I know when it comes to telegram is clicking on a link to a chat.
Found a group, but of course no links to the chinese twrp. Only links I have found are on weibo and just end up looping around
Other people will disagree but having no working twrp is a big factor. Let's see what happens when OnePlus release there android 11 mash up maybe we will have twrp working and more interest ?
a g bell said:
Other people will disagree but having no working twrp is a big factor. Let's see what happens when OnePlus release there android 11 mash up maybe we will have twrp working and more interest ?
Click to expand...
Click to collapse
This TWRP works fine for flashing and decrypting on custom ROMs. So it's not that.
And Android 11 will not magically fix everything, if anything, it'll break things like encryption even more.
TWRP is has lots of progress as of late, fastbootd tools has been implemented, dynamic partitions are better handled. Only significant thing left would be ADB sideload.
Lossyx said:
This TWRP works fine for flashing and decrypting on custom ROMs. So it's not that.
And Android 11 will not magically fix everything, if anything, it'll break things like encryption even more.
TWRP is has lots of progress as of late, fastbootd tools has been implemented, dynamic partitions are better handled. Only significant thing left would be ADB sideload.
Click to expand...
Click to collapse
Decryption is still broken on oos ? which is a OnePlus issue which will they will still break on 11?
Flashing ROMs from oos is a big issue which is still broken with this twrp
a g bell said:
Decryption is still broken on oos ? which is a OnePlus issue which will they will still break on 11?
Flashing ROMs from oos is a big issue which is still broken with this twrp
Click to expand...
Click to collapse
The decryption is broken because of OnePlus poor implemention of keymaster. Android 11 is once again changing keymaster which will break decryption even on devices that can successfully decrypt on Android 10. This means it will take time for TWRP to properly support decryption on Android 11.
When that happens, decryption might work for 7T/Pro because now OnePlus has to reimplement the new keymaster,. hopefully right this time.
As for flashing ROMs, just use adb push on your PC and push it to /cache or /mnt, then you can flash easily.
Lossyx said:
The decryption is broken because of OnePlus poor implemention of keymaster. Android 11 is once again changing keymaster which will break decryption even on devices that can successfully decrypt on Android 10. This means it will take time for TWRP to properly support decryption on Android 11.
When that happens, decryption might work for 7T/Pro because now OnePlus has to reimplement the new keymaster,. hopefully right this time.
As for flashing ROMs, just use adb push on your PC and push it to /cache or /mnt, then you can flash easily.
Click to expand...
Click to collapse
Just out of interest as you mentioned previously there has been a lot of progress on the twrp front why has nobody shared it ? is the source all available on git to build or am l missing something here ?
a g bell said:
Just out of interest as you mentioned previously there has been a lot of progress on the twrp front why has nobody shared it ? is the source all available on git to build or am l missing something here ?
Click to expand...
Click to collapse
https://github.com/TeamWin/android_bootable_recovery/commits/android-10.0
https://gerrit.twrp.me/q/status:open+-is:wip
I can try to build a test twrp and post here. I won't test it myself though, don't have time for it-
Lossyx said:
https://github.com/TeamWin/android_bootable_recovery/commits/android-10.0
https://gerrit.twrp.me/q/status:open+-is:wip
I can try to build a test twrp and post here. I won't test it myself though, don't have time for it-
Click to expand...
Click to collapse
Might setup building environment again and have a go myself if you do get the time to build l will give it try
Regretting going back to windows now
cheers ?
a g bell said:
Might setup building environment again and have a go myself if you do get the time to build l will give it try
Regretting going back to windows now
cheers
Click to expand...
Click to collapse
I am pretty sure you can just use WSL / 2 on Windows if you don't have Linux installed.
Everything has been built and shared over the last year. Name a rom. It's been built already. If you want more android R roms, just wait they're coming. But... Twrp works fine. Even on oos. Use LR Team Twrp (aka chinese twrp) it works perfectly. Flash away or what knot, I have never heard anything about a broken keymaster. that's the first I heard of that one. Flash whatever, build whatever, enjoy phone fun.
FullOfHell said:
Everything has been built and shared over the last year. Name a rom. It's been built already. If you want more android R roms, just wait they're coming. But... Twrp works fine. Even on oos. Use LR Team Twrp (aka chinese twrp) it works perfectly. Flash away or what knot, I have never heard anything about a broken keymaster. that's the first I heard of that one. Flash whatever, build whatever, enjoy phone fun.
Click to expand...
Click to collapse
Chinese twrp does not decrypt on stock oos properly unless there has been a new build recently ?
Has du been been built ?
a g bell said:
Chinese twrp does not decrypt on stock oos properly unless there has been a new build recently ?
Has du been been built ?
Click to expand...
Click to collapse
It absolutely does decrypt on oos. One must do a full format in twrp first. Then it works perfectly, every feature, 100%. Yes, I did du for 7t in December last year, or January.
FullOfHell said:
It absolutely does decrypt on oos. One must do a full format in twrp first. Then it works perfectly, every feature, 100%. Yes, I did du for 7t in December last year, or January.
Click to expand...
Click to collapse
Indeed it does you do a full format it works but then reboot and it's the same won't mount anything same as before.
a g bell said:
FullOfHell said:
It absolutely does decrypt on oos. One must do a full format in twrp first. Then it works perfectly, every feature, 100%. Yes, I did du for 7t in December last year, or January.
Click to expand...
Click to collapse
Indeed it does you do a full format it works but then reboot and it's the same won't mount anything same as before.
Click to expand...
Click to collapse
Funny I have had no problems for 10 months, on oos or custom.
I'm really keen on the hardware of this device and want to know if its likely that we'll get TWRP + Custom Roms for it?
Not a big fan of MIUI and Xiaomi have hinted that they won't support this device for that long
Falc7 said:
I'm really keen on the hardware of this device and want to know if its likely that we'll get TWRP + Custom Roms for it?
Not a big fan of MIUI and Xiaomi have hinted that they won't support this device for that long
Click to expand...
Click to collapse
I know what the MUIPRO team has on our TWRP device + firmware, but for now their site is moving ((
Nice to see that they finally created a forum for the 12X! Overall I hope that TWRP and Custom Roms will come to the 12X sooner or later, I thinks it's still a new device (and not on the cheap side), so eventually developers will get their hands on it.
Chinese developers have made TWRP for 12x,But it is encrypted and needs special tools to flash.
TWRP with working encripted
https://dl.akr-developers.com/?file=skkk/TWRP/A12/v3.6.2_A12/3.6.2_12-Mi12X_v3.6.2_A12-psyche-skkk_996f83fc.img
VMach3 said:
TWRP with working encripted
https://dl.akr-developers.com/?file=skkk/TWRP/A12/v3.6.2_A12/3.6.2_12-Mi12X_v3.6.2_A12-psyche-skkk_996f83fc.img
Click to expand...
Click to collapse
This link seems broken. Are you using this TWRP? Is it working fine?
rdadalte said:
This link seems broken. Are you using this TWRP? Is it working fine?
Click to expand...
Click to collapse
this link works: https://forum.xda-developers.com/t/is-this-twrp-working.4460651/