Related
DSP Manager is the sound processing app from the Cyanogen Mod Team(thanks).You can customize the equalizer manually or select from a bunch of preset options.
Requirements :
Rooted GS3
Custom recovery
Installation :
Enter recovery
Make a backup just in case
Install zip from sd card
Choose zip from sd card
Select DSPManager.... Zip
Reboot
Enjoy!!
If it worked for you please report back!
Download
DSP-Manager-v2.0.zip - 345.45 KB
apascual89 said:
DSP Manager.
Attached you will find the apk in a zip file that will install as a system app. I used this on the One X, can't remember who created it, sorry. Tried it on the GS3 and it's seems to be working perfectly.
Remember that I grabbed this from the One X threads, so don't freak out when the install proccess says something about One X
Enjoy!!
Click to expand...
Click to collapse
how do u install it on s3? do u have a guide?
Thank you in advance!
seems 2be a cwm-flash, try out
Need root for this ? any conflicts with poweramp ?
thanks
no
doki81 said:
how do u install it on s3? do u have a guide?
Thank you in advance!
Click to expand...
Click to collapse
If just updated with steps and requirements.
chriskinetic said:
Need root for this ? any conflicts with poweramp ?
thanks
Click to expand...
Click to collapse
Yes you need to be rooted and have a custom recovery installed like CWM.
Shouldn't interfere with poweramp
Have you tested it?????
I had tried it once (not this buy my own port) and it didn't work
EDIT : OK tested it... And it works!!!!!!
Thanks for the share
123shree said:
Have you tested it?????
I had tried it once (not this buy my own port) and it didn't work
Click to expand...
Click to collapse
I'm using it right now streaming over bluetooth. Remember to enable it in Sound/ Music Effects
apascual89 said:
I'm using it right now streaming over bluetooth. Remember to enable it in Sound/ Music Effects
Click to expand...
Click to collapse
Didn't find the need to... Just flashed it and it worked perfectly after the reboot.
hey guys iam verry happy with this DSP.Its the best DSP plugin what ever i used in my whole smartphone world and i am started by win mobile ^^
The sound is verry verry fantastic !Deep and smouth bass booster.Its so good when you listening old Alben without good dynamik, like a-ha or depeche mode.
The Treble was absolut clear an no aggressiv.
But for all power amp useres, make shure that you dont have "direct control" activate.so the DSP doesnt work !You can find it in settings-audio engine-advanced tweaks.
thanks and good night ;-)
Is it working for you guys?
190 downloads and not many replies, Has it worked for you guys?
I looking for a ver running on t989?
Anyone could share?
Sent from my SGH-T989 using XDA
It worked perfectly. Thanks a lot! :-D
Den store har talat.
Dont work for me, Wanam odex LF2 rom
Sent from my GT-I9300 using XDA
I changed the binary script so it says For Samsung Galaxy S3 instead of the HTC one X crap, for those that care
before i install it . how do you remove it if you choose to ?
dazzzdelux said:
before i install it . how do you remove it if you choose to ?
Click to expand...
Click to collapse
You can delete it from system /app using root explorer or a root level file browser
apascual89 said:
You can delete it from system /app using root explorer or a root level file browser
Click to expand...
Click to collapse
ok , thanks
I'm on Omega 5 and it doesn't have any impact on the sound coming from my bluetooth speaker.
I just flashed Trinity rom and first time i flashed the rom i applied AC!D..i thought that was the culprit so i reflashed the rom and didnt include AC!D but i still get this..volume is way to low for my liking..i cant seem to find some settings about this warning as well..advice anyone?
boyheadkick™
Sent with my Trinity Vengeance powered Acro S using Tap-Tap-Tapatalk
I believe that I've seen this on stock ICS. And its a Sony thing.
wew, so there's no way to disable safe audio settings even in Trinity Rom?
you can try using this mod...
http://forum.xda-developers.com/showthread.php?t=2250328
or install a different SoundAlertLevel.apk from different stock roms...
Morlock O said:
you can try using this mod...
http://forum.xda-developers.com/showthread.php?t=2250328
or install a different SoundAlertLevel.apk from different stock roms...
Click to expand...
Click to collapse
will this conflict with Noozxoide?
or how about if i just disable SoundAlertLevel.apk, will that work?
boyheadkick said:
will this conflict with Noozxoide?
or how about if i just disable SoundAlertLevel.apk, will that work?
Click to expand...
Click to collapse
I dont think it will conflict with nooz but better un-install it first while installing this mod..
You can't disble the SoundAlertLevel.Apk because it is actually the one that make you go beyond the alert level. without it the phone will not exceed 60% volume... just to find a version of it that does not throw the warning sign...
i found a workaround..when i select sound enhancement in music effects the issue happens, but when i select noozxoide it doesnt happen...
so i think @lewis021 is right, its a sony thing
Since another thread is getting hijacked it might be a good idea to start talking about Viper4Android in a separate place. This is just to share some info, not a Q&A for Viper4Android.
Viper4Android FX is like the “advanced” version of DSP Manager/Beats Audio by providing you with more advanced Surround/Bass/Clarity/Gain boost controls in addition to an equalizer that you can use for your headphones, speakers, bluetooth devices, and more.
I found the guide on how to do it here, I just updated the links and added some more info:
1. You need root and twrp
1a. Make a backup in twrp
1b. Seriously, make the backup
Skip 2. and go to 3. if you are using SuperSU
2. Change to permissive mode with SELinux Mode Changer that you can download here
3. Boot into twrp and flash Viper4Android, you can download the zip from here (old link here).
3b. Reflash SuperSu
3c. Wipe cache and dalvik
4. Boot
5. Start Viper4Android and give root access
6. Still in Viper4Android, under settings switch FX Compatible mode to Compatible.
7. Reboot
8. Activate Viper4Android
9. Enjoy
Additional info:
If you use Poweramp, disable Direct volume control in settings/audio/advanced tweaks.
Do it at your own risk and for technical questions about Viper4Android it's better if you post in the thread you find at 3.
Some people report it working without changing to permissive mode, others report that it's not working at all. Any feedback is appreciated.
What does viper4droid do ???
Sent from my ONE E1003 using Tapatalk
mohammedtabish said:
What does viper4droid do ???
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
Just added the info in the first post:
Viper4Android FX is like the “advanced” version of DSP Manager/Beats Audio by providing you with more advanced Surround/Bass/Clarity/Gain boost controls in addition to an equalizer that you can use for your headphones, speakers, bluetooth devices, and more.
charliebigpot said:
Viper4Android FX is like the “advanced” version of DSP Manager/Beats Audio by providing you with more advanced Surround/Bass/Clarity/Gain boost controls in addition to an equalizer that you can use for your headphones, speakers, bluetooth devices, and more.
Click to expand...
Click to collapse
Thanks got it
Sent from my ONE E1003 using Tapatalk
charliebigpot said:
Since another thread is getting hijacked it might be a good idea to start talking about Viper4Android in a separate place. This is just to share some info, not a Q&A for Viper4Android.
Viper4Android FX is like the “advanced” version of DSP Manager/Beats Audio by providing you with more advanced Surround/Bass/Clarity/Gain boost controls in addition to an equalizer that you can use for your headphones, speakers, bluetooth devices, and more.
I found the guide on how to do it here, I just updated the links and added some more info:
1. You need root and twrp
1a. Make a backup in twrp
1b. Seriously, make the backup
2. Change to permissive mode with SELinux Mode Changer that you can download here.
3. Boot into twrp and flash Viper4Android, you can download the zip from here
4. Open Viper4Android and under settings switch FX Compatible mode to Compatible.
5. Wipe dalvik and cache
6. Reboot
Do it at your own risk and for technical questions about Viper4Android it's better if you post in the thread you find at 3.
Some people report it working without changing to permissive mode, others report that it's not working at all. Any feedback is appreciated.
Click to expand...
Click to collapse
Have u tested it on OxygenOS 2.1.3-X?
Sent from my ONE E1003 using Tapatalk
Funk Wizard said:
Have u tested it on OxygenOS 2.1.3-X?
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
I'm currently using V4A on 2.1.3-x with no problems. :good:
Funk Wizard said:
Have u tested it on OxygenOS 2.1.3-X?
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
I've flashed it, tbh I only notice a small difference when activating it but I still have to play around with the settings. Also, I'm using Jetaudio, maybe it doesn't work that well with that.
Also, I've just changed the description in the op, according to the viper4android post I link to if you already use supersu (which is the same as in the rooting guide) you don't need to do the change to permissive mode.
Mojar7070 said:
I'm currently using V4A on 2.1.3-x with no problems. :good:
Click to expand...
Click to collapse
Did you just flash it or did you also change to permissive mode?
Mojar7070 said:
I'm currently using V4A on 2.1.3-x with no problems. :good:
Click to expand...
Click to collapse
Just curious, do you see a significant difference with your current v4a settings as compared to stock?
@charliebigpot you can add in OP that in order to make poweramp work with it, disable Direct volume control in settings/audio/advanced tweaks.
charliebigpot said:
Did you just flash it or did you also change to permissive mode?
Click to expand...
Click to collapse
For me personally, I used lolliviper in the nexus 5 forums. Flashed through TWRP and then followed by SuperSU.
No need to change the selinux.
---------- Post added at 09:25 AM ---------- Previous post was at 09:23 AM ----------
primemonitor said:
Just curious, do you see a significant difference with your current v4a settings as compared to stock?
Click to expand...
Click to collapse
With the phone speakers, not much I played around with some settings to give sound a "fuller" effect.
However with Bluetooth or wired headset, definitely noticeable.
Do you guys flash busybox also prior to all of this?
joho5 said:
Do you guys flash busybox also prior to all of this?
Click to expand...
Click to collapse
Through the play store.
https://play.google.com/store/apps/details?id=stericson.busybox&hl=en
Edit: I'm sorry I miss read the post. Yes, install busybox first then flashing V4A through TWRP.
Xtreme Music
Guys Viper works great but why don't u check out xtreme music mod too. It's the mixture of all the best music mods ..!!
http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
parasthakur37 said:
@charliebigpot you can add in OP that in order to make poweramp work with it, disable Direct volume control in settings/audio/advanced tweaks.
Click to expand...
Click to collapse
imo, poweramp's equalizer does an amazing job already. Just ramp up the headphone gain from mixer_path.xml and you're good to go.
Mojar7070 said:
I'm currently using V4A on 2.1.3-x with no problems. :good:
Click to expand...
Click to collapse
Could you explain how you got it working? I've tried everything man. Normal mode /compatible mode. Tried all 3 drivers. Tried both selinux modes. Even tried changing the build prop with no luck. Any ideas or tips? I am on 2.1.3x myself. Rooted with supersu
Savya said:
Could you explain how you got it working? I've tried everything man. Normal mode /compatible mode. Tried all 3 drivers. Tried both selinux modes. Even tried changing the build prop with no luck. Any ideas or tips? I am on 2.1.3x myself. Rooted with supersu
Click to expand...
Click to collapse
First off i'll share my setup:
Recovery: Eng.stk Twrp r5
Kernel: Also by Eng.stk r61
Rom Stock 2.1.3-x
Viper4android: Use lolliviper zip from this thread: http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
I just flashed the lolliviper zip file through twrp. flash SuperSU 2.52 again just in case. wipe cache and dalvik. reboot.
after reboot, launch V4A app. grant supersu permission. install "high quality" (the middle one) driver. reboot.
Test by playing music (from storage, pandora, spotify etc.) keep music playing and then launch V4A again. go to 3 dot menu and choose driver status and it should show if its processing or not.
good luck.
Mojar7070 said:
First off i'll share my setup:
Recovery: Eng.stk Twrp r5
Kernel: Also by Eng.stk r61
Rom Stock 2.1.3-x
Viper4android: Use lolliviper zip from this thread: http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
I just flashed the lolliviper zip file through twrp. flash SuperSU 2.52 again just in case. wipe cache and dalvik. reboot.
after reboot, launch V4A app. grant supersu permission. install "high quality" (the middle one) driver. reboot.
Test by playing music (from storage, pandora, spotify etc.) keep music playing and then launch V4A again. go to 3 dot menu and choose driver status and it should show if its processing or not.
good luck.
Click to expand...
Click to collapse
Duuude. I don't know how. But it worked xD crazy how simple that was yet I couldn't get it right in so many tries. More ppl should see this. Maybe OP can even add the steps into OP. Thanks mate!
Savya said:
Duuude. I don't know how. But it worked xD crazy how simple that was yet I couldn't get it right in so many tries. More ppl should see this. Maybe OP can even add the steps into OP. Thanks mate!
Click to expand...
Click to collapse
I'll add the optional supersu step, but the rest is already there. After that it's up to each one to select between the 3 profiles at first boot.
Someone should try LolliViPER[6.0.1].zip zip on any 6.0+ ROM wit "Enforcing" kernel, see if it works.
I found this on the Nexus 5 post that is linked in the OP, guys got a bunch of Thanks for this, guess it wont hurt to try.
Hi guys, just wanted to open this thread for those of us using the viper4arise sound mod.
I'm actually on Viper 3.5.0 with A.R.I.S.E. Deuteronomy 2.71b + AM3D + permissive + Arkamys + Sonophilos' profile and it sounds really impressive.
What about your config?
I'm on Nougat FW, Viper 5.2.0, Deuteronomy 2.4, ICESound, Arkamys removed, no additional add-ons, SELinux permissive as well. Sounds great, too
RogerF81 said:
I'm on Nougat FW, Viper 5.2.0, Deuteronomy 2.4, ICESound, Arkamys removed, no additional add-ons, SELinux permissive as well. Sounds great, too
Click to expand...
Click to collapse
Does your Boomsound work? Mine doesn't with the toolbox
Brutale1090! said:
Does your Boomsound work? Mine doesn't with the toolbox
Click to expand...
Click to collapse
Yes it does. Exactly due to that, I don't use the toolbox
Have you got a link to the toolbox fix plz ? I take it is just the normal Deut 2.4 you flashed?
RogerF81 said:
Yes it does. Exactly due to that, I don't use the toolbox
Click to expand...
Click to collapse
Which ICE confign do you use?
Why did you remove ARKAMYS?
Do you use any special setprop?
Did you try to combine V4A with Kronos?
saor11 said:
Have you got a link to the toolbox fix plz ? I take it is just the normal Deut 2.4 you flashed?
Click to expand...
Click to collapse
You find it in the OP of his developer in the first page of the A.R.I.S.E. thread
Brutale1090! said:
You find it in the OP of his developer in the first page of the A.R.I.S.E. thread
Click to expand...
Click to collapse
Thanks
Brutale1090! said:
Which ICE confign do you use?
Why did you remove ARKAMYS?
Do you use any special setprop?
Did you try to combine V4A with Kronos?
Click to expand...
Click to collapse
I use the default ICE config, means config #1. I removed Arkamys because it always FC unfortunately.
No, I use no setprop at all.
I did, but I gave it up because it always felt like there was something conflicting. But I use AcoustiX on top of Deut 2.4 and it sounds great.
RogerF81 said:
I use the default ICE config, means config #1. I removed Arkamys because it always FC unfortunately.
No, I use no setprop at all.
I did, but I gave it up because it always felt like there was something conflicting. But I use AcoustiX on top of Deut 2.4 and it sounds great.
Click to expand...
Click to collapse
Arkamys doesn't freeze in my case, maybe cause I'm on MM
Anybody letting Boomsound working together with another sorround effect like Dolby or AM3D?
Try not to rip me too much, but could you link the files?
Trying to navigate through those threads to find the correct links for your device is quite frustrating.
What did you use to setup for the 10?
Thanks in advance.
mcwups1 said:
Try not to rip me too much, but could you link the files?
Trying to navigate through those threads to find the correct links for your device is quite frustrating.
What did you use to setup for the 10?
Thanks in advance.
Click to expand...
Click to collapse
The mod isn't device specific, you can configure it according to your music taste. Ask in the thread to be added in the Telegramm group in order to have more details, I opened this post to discuss the best config for our devices.
I've been out of touch of flashing sound mods because I naively thought the 10 sounds good as is!
Is this mod superior to standard v4a?
chalmizzle said:
I've been out of touch of flashing sound mods because I naively thought the 10 sounds good as is!
Is this mod superior to standard v4a?
Click to expand...
Click to collapse
Yes it is
Brutale1090! said:
Yes it is
Click to expand...
Click to collapse
Great, how so? What advantage does this offer over v4a?
chalmizzle said:
Great, how so? What advantage does this offer over v4a?
Click to expand...
Click to collapse
Audio libraries + other mods included in a unique aroma installer
Running deut 2.4 standalone and it sounds awsome. I might try the toolbox to see if there is any difference. Im using auiophile x profile aswell. What profiles are you guys using?
yldlj said:
Running deut 2.4 standalone and it sounds awsome. I might try the toolbox to see if there is any difference. Im using auiophile x profile aswell. What profiles are you guys using?
Click to expand...
Click to collapse
I'm on Deuteronomy 2.4 + Boomsound and Sonophilos' profile, no ice, no special setprop, no toolbox (breaks Boomsound)
Sound is more engaging but I've lost a bit of separation and detail. I already know from my old Z3 that I still need time to find the best config.
The toolbox breaking can be solved by changing the setprop.... Although now i plan on a clean flash again...i will try to change my current setup... ARISE does wonders for phones regardless of whether the device has good or bad audio qualities. Been using it since it was on concept stage with guitardedhero and ben on 2 devices.
I changed a few things in kernel auditor on my redmi note 5 like intensity of screen saturation or headphone gain (because xiaomi lowers the volume in Europe because of European Union regulations) and phone forgets settings after a few minutes. MIUI 10 9.1.3 from miuipolska(dot)pl kernel InsigniuX. How to fix it?
You need to make kernel adiutor as system app.
Silverowe Plejsy said:
I changed a few things in kernel auditor on my redmi note 5 like intensity of screen saturation or headphone gain (because xiaomi lowers the volume in Europe because of European Union regulations) and phone forgets settings after a few minutes. MIUI 10 9.1.3 from miuipolska(dot)pl kernel InsigniuX. How to fix it?
Click to expand...
Click to collapse
its been like that ever since RN5 release.
go to settings./ then on apply on boot section press TEST itll apply all settings. i do this everytime i reboot phone.
What's +/-10?
AmoghUpadhyay said:
What's +/-10?
Click to expand...
Click to collapse
sometimes more sometimes less than 10 minutes
Spakainz said:
You need to make kernel adiutor as system app.
Click to expand...
Click to collapse
Thanks i will check if it works
raptorddd said:
its been like that ever since RN5 release.
go to settings./ then on apply on boot section press TEST itll apply all settings. i do this everytime i reboot phone.
Click to expand...
Click to collapse
Its aplying settings but still forgeting after few minutes
Spakainz said:
You need to make kernel adiutor as system app.
Click to expand...
Click to collapse
Not working still forgetting settings
Silverowe Plejsy said:
Not working still forgetting settings
Click to expand...
Click to collapse
THERE is no solutions for that (YET)
on every wake i have to reset Kcal values according to what suites my eyes!
Silverowe Plejsy said:
Its aplying settings but still forgeting after few minutes
Click to expand...
Click to collapse
am on evolution os. miui also used masik and official miui. once i hit test it applies and never resets only after reboot.
YasuHamed said:
THERE is no solutions for that (YET)
on every wake i have to reset Kcal values according to what suites my eyes!
Click to expand...
Click to collapse
This is really bad news write if you find solution
try to go to battery setting, and customize the app to have no restriction see if it helps
yuwilson10 said:
try to go to battery setting, and customize the app to have no restriction see if it helps
Click to expand...
Click to collapse
or go to multi task and lock the app
yuwilson10 said:
or go to multi task and lock the app
Click to expand...
Click to collapse
I did it first but it does not work
Still no solution for this? Its a major PITA having to apply these every time i unlock...
Make kernel autiator as system apps using app systemizer this will solve the problem
Silverowe Plejsy said:
This is really bad news write if you find solution
Click to expand...
Click to collapse
what kernel are you using? you can try AGNI kernel
https://forum.xda-developers.com/re...ernel-20-10-2018-agni-miui-oreo-v3-0-t3856580
i reported this issue to @psndna88
plz check whether its been fixed in 4.9agni or not...
shafee03 said:
Make kernel autiator as system apps using app systemizer this will solve the problem
Click to expand...
Click to collapse
Doesnt work under MIUI apps cant be made system. I've tried both titanium backup and app systemizer both end in a reboot with kernel auditor completely removed.
I found this solution on PureCAF kernel group on Telegram, thanks Kugumin for this!
Using a Root Explorer available on Play Store, navigate to system/etc/device_features. You'll find a file called "whyred.xml".
Search for the string "screen_effect_supported" and comment it, by adding <!-- on the starting line and --> on the end.
thomasginn said:
I found this solution on PureCAF kernel group on Telegram, thanks Kugumin for this!
Using a Root Explorer available on Play Store, navigate to system/etc/device_features. You'll find a file called "whyred.xml".
Search for the string "screen_effect_supported" and comment it, by adding <!-- on the starting line and --> on the end.
Click to expand...
Click to collapse
It works it really works! Cannot thank you enough for posting this and Kugumin for giving the solution. Thank you both of you!