Since another thread is getting hijacked it might be a good idea to start talking about Viper4Android in a separate place. This is just to share some info, not a Q&A for Viper4Android.
Viper4Android FX is like the “advanced” version of DSP Manager/Beats Audio by providing you with more advanced Surround/Bass/Clarity/Gain boost controls in addition to an equalizer that you can use for your headphones, speakers, bluetooth devices, and more.
I found the guide on how to do it here, I just updated the links and added some more info:
1. You need root and twrp
1a. Make a backup in twrp
1b. Seriously, make the backup
Skip 2. and go to 3. if you are using SuperSU
2. Change to permissive mode with SELinux Mode Changer that you can download here
3. Boot into twrp and flash Viper4Android, you can download the zip from here (old link here).
3b. Reflash SuperSu
3c. Wipe cache and dalvik
4. Boot
5. Start Viper4Android and give root access
6. Still in Viper4Android, under settings switch FX Compatible mode to Compatible.
7. Reboot
8. Activate Viper4Android
9. Enjoy
Additional info:
If you use Poweramp, disable Direct volume control in settings/audio/advanced tweaks.
Do it at your own risk and for technical questions about Viper4Android it's better if you post in the thread you find at 3.
Some people report it working without changing to permissive mode, others report that it's not working at all. Any feedback is appreciated.
What does viper4droid do ???
Sent from my ONE E1003 using Tapatalk
mohammedtabish said:
What does viper4droid do ???
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
Just added the info in the first post:
Viper4Android FX is like the “advanced” version of DSP Manager/Beats Audio by providing you with more advanced Surround/Bass/Clarity/Gain boost controls in addition to an equalizer that you can use for your headphones, speakers, bluetooth devices, and more.
charliebigpot said:
Viper4Android FX is like the “advanced” version of DSP Manager/Beats Audio by providing you with more advanced Surround/Bass/Clarity/Gain boost controls in addition to an equalizer that you can use for your headphones, speakers, bluetooth devices, and more.
Click to expand...
Click to collapse
Thanks got it
Sent from my ONE E1003 using Tapatalk
charliebigpot said:
Since another thread is getting hijacked it might be a good idea to start talking about Viper4Android in a separate place. This is just to share some info, not a Q&A for Viper4Android.
Viper4Android FX is like the “advanced” version of DSP Manager/Beats Audio by providing you with more advanced Surround/Bass/Clarity/Gain boost controls in addition to an equalizer that you can use for your headphones, speakers, bluetooth devices, and more.
I found the guide on how to do it here, I just updated the links and added some more info:
1. You need root and twrp
1a. Make a backup in twrp
1b. Seriously, make the backup
2. Change to permissive mode with SELinux Mode Changer that you can download here.
3. Boot into twrp and flash Viper4Android, you can download the zip from here
4. Open Viper4Android and under settings switch FX Compatible mode to Compatible.
5. Wipe dalvik and cache
6. Reboot
Do it at your own risk and for technical questions about Viper4Android it's better if you post in the thread you find at 3.
Some people report it working without changing to permissive mode, others report that it's not working at all. Any feedback is appreciated.
Click to expand...
Click to collapse
Have u tested it on OxygenOS 2.1.3-X?
Sent from my ONE E1003 using Tapatalk
Funk Wizard said:
Have u tested it on OxygenOS 2.1.3-X?
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
I'm currently using V4A on 2.1.3-x with no problems. :good:
Funk Wizard said:
Have u tested it on OxygenOS 2.1.3-X?
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
I've flashed it, tbh I only notice a small difference when activating it but I still have to play around with the settings. Also, I'm using Jetaudio, maybe it doesn't work that well with that.
Also, I've just changed the description in the op, according to the viper4android post I link to if you already use supersu (which is the same as in the rooting guide) you don't need to do the change to permissive mode.
Mojar7070 said:
I'm currently using V4A on 2.1.3-x with no problems. :good:
Click to expand...
Click to collapse
Did you just flash it or did you also change to permissive mode?
Mojar7070 said:
I'm currently using V4A on 2.1.3-x with no problems. :good:
Click to expand...
Click to collapse
Just curious, do you see a significant difference with your current v4a settings as compared to stock?
@charliebigpot you can add in OP that in order to make poweramp work with it, disable Direct volume control in settings/audio/advanced tweaks.
charliebigpot said:
Did you just flash it or did you also change to permissive mode?
Click to expand...
Click to collapse
For me personally, I used lolliviper in the nexus 5 forums. Flashed through TWRP and then followed by SuperSU.
No need to change the selinux.
---------- Post added at 09:25 AM ---------- Previous post was at 09:23 AM ----------
primemonitor said:
Just curious, do you see a significant difference with your current v4a settings as compared to stock?
Click to expand...
Click to collapse
With the phone speakers, not much I played around with some settings to give sound a "fuller" effect.
However with Bluetooth or wired headset, definitely noticeable.
Do you guys flash busybox also prior to all of this?
joho5 said:
Do you guys flash busybox also prior to all of this?
Click to expand...
Click to collapse
Through the play store.
https://play.google.com/store/apps/details?id=stericson.busybox&hl=en
Edit: I'm sorry I miss read the post. Yes, install busybox first then flashing V4A through TWRP.
Xtreme Music
Guys Viper works great but why don't u check out xtreme music mod too. It's the mixture of all the best music mods ..!!
http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
parasthakur37 said:
@charliebigpot you can add in OP that in order to make poweramp work with it, disable Direct volume control in settings/audio/advanced tweaks.
Click to expand...
Click to collapse
imo, poweramp's equalizer does an amazing job already. Just ramp up the headphone gain from mixer_path.xml and you're good to go.
Mojar7070 said:
I'm currently using V4A on 2.1.3-x with no problems. :good:
Click to expand...
Click to collapse
Could you explain how you got it working? I've tried everything man. Normal mode /compatible mode. Tried all 3 drivers. Tried both selinux modes. Even tried changing the build prop with no luck. Any ideas or tips? I am on 2.1.3x myself. Rooted with supersu
Savya said:
Could you explain how you got it working? I've tried everything man. Normal mode /compatible mode. Tried all 3 drivers. Tried both selinux modes. Even tried changing the build prop with no luck. Any ideas or tips? I am on 2.1.3x myself. Rooted with supersu
Click to expand...
Click to collapse
First off i'll share my setup:
Recovery: Eng.stk Twrp r5
Kernel: Also by Eng.stk r61
Rom Stock 2.1.3-x
Viper4android: Use lolliviper zip from this thread: http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
I just flashed the lolliviper zip file through twrp. flash SuperSU 2.52 again just in case. wipe cache and dalvik. reboot.
after reboot, launch V4A app. grant supersu permission. install "high quality" (the middle one) driver. reboot.
Test by playing music (from storage, pandora, spotify etc.) keep music playing and then launch V4A again. go to 3 dot menu and choose driver status and it should show if its processing or not.
good luck.
Mojar7070 said:
First off i'll share my setup:
Recovery: Eng.stk Twrp r5
Kernel: Also by Eng.stk r61
Rom Stock 2.1.3-x
Viper4android: Use lolliviper zip from this thread: http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
I just flashed the lolliviper zip file through twrp. flash SuperSU 2.52 again just in case. wipe cache and dalvik. reboot.
after reboot, launch V4A app. grant supersu permission. install "high quality" (the middle one) driver. reboot.
Test by playing music (from storage, pandora, spotify etc.) keep music playing and then launch V4A again. go to 3 dot menu and choose driver status and it should show if its processing or not.
good luck.
Click to expand...
Click to collapse
Duuude. I don't know how. But it worked xD crazy how simple that was yet I couldn't get it right in so many tries. More ppl should see this. Maybe OP can even add the steps into OP. Thanks mate!
Savya said:
Duuude. I don't know how. But it worked xD crazy how simple that was yet I couldn't get it right in so many tries. More ppl should see this. Maybe OP can even add the steps into OP. Thanks mate!
Click to expand...
Click to collapse
I'll add the optional supersu step, but the rest is already there. After that it's up to each one to select between the 3 profiles at first boot.
Someone should try LolliViPER[6.0.1].zip zip on any 6.0+ ROM wit "Enforcing" kernel, see if it works.
I found this on the Nexus 5 post that is linked in the OP, guys got a bunch of Thanks for this, guess it wont hurt to try.
Related
Hear the big difference with x3reme music and theater mod v2!!!
Supported with Sense 7-8, Marshmallow 6.0+
Changelog: 8/25/2016
Added HiFi Audio libs-x64 and sound effects and other files
How to install:
1) Download and move it to your internal storage
2) Reboot to Recovery
3) Install the zip like any other rom/mod
4) Do Not wipe anything, just reboot and hear the difference!!!
Side Note: Make backup if it breaks some settings send your me build.prop from the rom your using for a fix :good:
Download Below:
x3remeDSv2
It won't flash , script error
x3reme85 said:
Hear the big difference with x3reme music and theater mod!!!
Supported with Sense 7, Marshmallow 6.0
How to install:
1) Download and move it to your internal storage
2) Reboot to Recovery
3) Install the zip like any other rom/mod
4) Do Not wipe anything, just reboot and hear the difference!!!
Click to expand...
Click to collapse
uhhh this zip only contains a Ds.apk and a dolby config which is the stock file of M9's BoomSound presets :s am I missing something here?
why do you use/took xposed framework installer and just added some files into it, which even won't really flash properly..
DeeZZ_NuuZZ said:
why do you use/took xposed framework installer and just added some files into it, which even won't really flash properly..
Click to expand...
Click to collapse
sorry everyone put in the wrong zip file thanks for the heads up :good: accidently deleted the wrong file had to do it over again lol its fix and ready to flash as just tested it myself
ZeroInfinity said:
uhhh this zip only contains a Ds.apk and a dolby config which is the stock file of M9's BoomSound presets :s am I missing something here?
Click to expand...
Click to collapse
It's an updated Ds.apk and its not a stock file its been modified which is to make the speakers more louder.
sorry to say, but it sounds weird on headphones and also speakers output is even worse then stock
DeeZZ_NuuZZ said:
sorry to say, but it sounds weird on headphones and also speakers output is even worse then stock
Click to expand...
Click to collapse
Yeah thought so too so I added another file to fix that should be better now thanks for your opinion :good:
New Update Changelog: 8/24/2016
Added HiFi Audio libs x64 and sound effects
Has anyone flashed it yet? ��
didn't tried yet, but since this needs sense rom, you need to edit the HTC_audio_effects.conf in /system/etc/ not the audio_effects. where did you take the libs from?
@ZeroInfinity please take a look
New updated made more fixes boomsound setting and presets works like a charm now. Backup if some settings are broken from your rom send your build.prop for a fix :good:
x3reme85 said:
New updated made more fixes boomsound setting and presets works like a charm now. Backup if some settings are broken from your rom send your build.prop for a fix :good:
Click to expand...
Click to collapse
sorry am not on sense rom for now, and when i switch back i will either install viper10 when it's out or ICE10 port.
DeeZZ_NuuZZ said:
didn't tried yet, but since this needs sense rom, you need to edit the HTC_audio_effects.conf in /system/etc/ not the audio_effects. where did you take the libs from?
@ZeroInfinity please take a look
Click to expand...
Click to collapse
Libs are from 10
x3reme85 said:
New updated made more fixes boomsound setting and presets works like a charm now. Backup if some settings are broken from your rom send your build.prop for a fix :good:
Click to expand...
Click to collapse
Have you even tried it yet?? Or are you hoping every 1else will
Æaa \../
it breaks audio on htc music player and kills boomsound on ICE10 port.
and why you put a complete build.prop inside the zip, instead of making a script which changes only th things it needs.
download link does not work
michakulik said:
download link does not work
Click to expand...
Click to collapse
This mod doesn't work anyway and it's old af
Sent from my Google Pixel 3 XL using XDA Labs
Hello, I tried lots of solutions to take a vip4andoird on my stock 10e lollipop. I have root, set permission in selinux, install busybox, chesk AwsomePlayer in programmer settings, change
compatibility mode in viper and still have an error while i like to install drivers "error by installing libraries" How can I solve this?
This is a zip that allways work of some reason..install ViPERAudio 5.5 Sony Beats Edition.zip
Enjoy
Edit: ViPERAtmos 5.5 Sony Beats Edition.zip
http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Spoookie said:
This is a zip that allways work of some reason..install ViPERAudio 5.5 Sony Beats Edition.zip
Enjoy
http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Click to expand...
Click to collapse
Can I flash this in flashfire? I root my phone by this method - http://forum.xda-developers.com/g4/general/h815-europe-10e-rooted-image-t3191469 and I dont have custom recovery
kuba929 said:
Can I flash this in flashfire? I root my phone by this method - http://forum.xda-developers.com/g4/general/h815-europe-10e-rooted-image-t3191469 and I dont have custom recovery
Click to expand...
Click to collapse
Yes but i said wrong, ViPERAtmos 5.5 Sony Beats Edition.zip
Edit: Typ to find Virtual_Dolby_Decoder.irs to use as IRS (Convolver). I can send it to you if you dont find it..best to use that one in wiper4windwos to.
thank u, now it's working
kuba929 said:
thank u, now it's working
Click to expand...
Click to collapse
I know I´m happy for you, now you have THE sound..dont forget the Atmos app you got. Sett it to intelligence ..
[email protected] I install zip, and after it install Viper4android because in phone I haven't got any application named Atmos
Wysłane z mojego LG-H815 przy użyciu Tapatalka
Didn't work for me for some reason.arent i supposed to see it on my app drawer?
Spoookie said:
This is a zip that allways work of ome reason..install ViPERAudio 5.5 Sony Beats Edition.zip
Enjoy
Edit: ViPERAtmos 5.5 Sony Beats Edition.zip
http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Click to expand...
Click to collapse
If you're avoiding anything to do with Beats™ then try the following zip file otherwise, the instructions should be the same as others have shared here.
i) Download Viper4Android from here: https://www.dropbox.com/s/lvcxffdqimbi78b/V4A_Poweramp_Lollipop_v3.zip?dl=0
ii) Place the zip file on your phone or SD card and flash it in recovery. Reboot.
iii) Open the ViperFX app. From the menu and install the driver.
iv) You need to set selinux to permissive to get it to work. Do this by downloading this app: http://forum.xda-developers.com/devdb/project/dl/?id=12506
Install it. Open the app and set selinux to permissive. Reboot.
v) Install BusyBox from here: https://play.google.com/store/apps/details?id=stericson.busybox
[email protected] said:
Didn't work for me for some reason.arent i supposed to see it on my app drawer?
Click to expand...
Click to collapse
Sure you wipe the cash and dalvik afterwards you flash the zip???? And dont have a nother eq app installed...?
Try MusicFX Installer and AudioFX Remover.zip before flash the zip and then wipe cash and dalvik.
About gave up for months, then it clicked in my mind when i saw a post mention to make sure all other audio apps redirect eq to viper, and if not, change them. Even if you dont use an audio player app, change it too.
Problem is, i could not get the lg music app (which i never use) to change the equalizer to viper, it just had it's own default settings, so i ignored it. So i decided to revisit the lg app, and froze the app with link2sd, i also froze the lg video app too, just in case. Rebooted and now viper sees NEON and i can even run without compatibility mode (which did not work consistantly for me) .
I tried all steps to get this to work, not sure what other things are needed for everyone else, but i tried moving viper to system, installed selinuxmodechanger, maybe this can be uninstalled now, i have no idea. I have no plans to fix what isnt broken and find out myself, so just try freezing lg music app for starters.
I have the s6 edge+ and my wife has the note 5, can't get Viper to work just like everybody else. Other phone's versions of OS use mixer_paths.xml to adjust volume/levels, but these 2 phones have a separate file titled mixer_gains.xml where volume levels can easily be adjusted. Is this separate new file the reason why Viper won't work?
Misterjunky said:
Here is a combo audio enhancer for all you audiophiles: https://www.androidfilehost.com/?fid=24562946973631338
This twrp flashable zip file contains not only viper, but this has the three finest audio enhancers in it which are fully
compatible to any android phone which has already been updated to the new Marshmallow 6.0 firmware.
This contains Dolby Atmos, Viper4android and Beats Audio all in one flash able zip file.
Also after you flash this it will only create one icon in the app drawer but when you open it it will give you a choice
of any of the three or you can even use all three at the same time if you like.
Good luck,
Have a great day.
Sent from my SM-G935F using
Click to expand...
Click to collapse
ElDuez said:
Misterjunky said:
Here is a combo audio enhancer for all you audiophiles: https://www.androidfilehost.com/?fid=24562946973631338
This twrp flashable zip file contains not only viper, but this has the three finest audio enhancers in it which are fully
compatible to any android phone which has already been updated to the new Marshmallow 6.0 firmware.
This contains Dolby Atmos, Viper4android and Beats Audio all in one flash able zip file.
Also after you flash this it will only create one icon in the app drawer but when you open it it will give you a choice
of any of the three or you can even use all three at the same time if you like.
Good luck,
Have a great day.
Sent from my SM-G935F using
Click to expand...
Click to collapse
IT WORKED!!! AND IT KICKS ASS!! THANK YOU ElDuez and Mr. Junky! My ears rejoice!
Click to expand...
Click to collapse
I managed to install it, but I'm not hearing any difference... am I missing any steps in between?
mau921 said:
I managed to install it, but I'm not hearing any difference... am I missing any steps in between?
Click to expand...
Click to collapse
and false alarm! turns out it was just the Music apk I was using! all good now!
its viper4android work on this version ? i try to use it on Open Beta 7 ,without success.
selinux mode changer dont work too. ( i cant change to permisive )
i use Open Beta 8 , Root (SR5-SuperSU-v2.78-SR5- ) , Custom TWRP.
Thanks!
razzorchile said:
its viper4android work on this version ? i try to use it on Open Beta 7 ,without success.
selinux mode changer dont work too. ( i cant change to permisive )
i use Open Beta 8 , Root (SR5-SuperSU-v2.78-SR5- ) , Custom TWRP.
Thanks!
Click to expand...
Click to collapse
Using atmos sound system and is ok
Have you tried out their own internal audio control program
razzorchile said:
its viper4android work on this version ? i try to use it on Open Beta 7 ,without success.
selinux mode changer dont work too. ( i cant change to permisive )
i use Open Beta 8 , Root (SR5-SuperSU-v2.78-SR5- ) , Custom TWRP.
Thanks!
Click to expand...
Click to collapse
Backup your rom, install guitardedhero.zip
Root explorer - Go to root/vendor/etc and rename audio_effects.conf to audio_effects.conf.bak
Reboot
AND LET US KNOW
http://forum.xda-developers.com/showthread.php?p=68500738#post68500738
Eagle-no1 said:
Have you tried out their own internal audio control program
Click to expand...
Click to collapse
Yes, but im not satisfied with the result, The range of bands is very small
shafi31 said:
Backup your rom, install guitardedhero.zip
Root explorer - Go to root/vendor/etc and rename audio_effects.conf to audio_effects.conf.bak
Reboot
AND LET US KNOW
http://forum.xda-developers.com/showthread.php?p=68500738#post68500738
Click to expand...
Click to collapse
working great! :highfive:
Thks!! :victory:
fantamadnesss said:
Using atmos sound system and is ok
Click to expand...
Click to collapse
You mean dolbyAtmos on beta 8? If yes, could you please share zip or link?
quaresma158 said:
You mean dolbyAtmos on beta 8? If yes, could you please share zip or link?
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24651442761498767
Don't forget to install the deep buffer remover also in the guitarededhero thread, I couldn't get viper to work without that
frickinjerms said:
Don't forget to install the deep buffer remover also in the guitarededhero thread, I couldn't get viper to work without that
Click to expand...
Click to collapse
Do you have a link fot his file? Can't seem to find it
jay_snake said:
Do you have a link fot his file? Can't seem to find it
Click to expand...
Click to collapse
Oops it was in the Dolby Atmos thread by westenbrood. My brain is derpy sometimes
HERE YA GO!
It's right there past the 6.5 download link, can't miss it. I don't know for certain if this is the magic answer for nougat, but if viper is showing all is well other than the driver status being abnormal (which was the problem with MM) then you should be good to go after flashing it. As always YMMV. Make a backup just in case.
Dolby seems to be working but V4A keeps closing and says Open App again.....never works.....what am I doing wrong? I renamed audio.conf to audio.conf.bak and rebooted the phone
dindoliya said:
Dolby seems to be working but V4A keeps closing and says Open App again.....never works.....what am I doing wrong? I renamed audio.conf to audio.conf.bak and rebooted the phone
Click to expand...
Click to collapse
I must have done something wrong. I dirty flashed the ROM and installed A.R.I.S.E. again. Now everything seems to be working. I did not have to modify any files or flash any additional files
A.R.I.S.E. Leviticus 1.3 working just fine
razzorchile said:
its viper4android work on this version ? i try to use it on Open Beta 7 ,without success.
selinux mode changer dont work too. ( i cant change to permisive )
i use Open Beta 8 , Root (SR5-SuperSU-v2.78-SR5- ) , Custom TWRP.
Thanks!
Click to expand...
Click to collapse
Yes, new version for Nougat
http://www.theandroidsoul.com/install-viper4android-nougat/
Sent from my Pixel XL using XDA-Developers mobile app
oriveradel said:
Yes, new version for Nougat
http://www.theandroidsoul.com/install-viper4android-nougat/
Click to expand...
Click to collapse
Tried that on fresh install, installs no errors and then driver showed processing for a few seconds (but no enhanced audio) and then driver not processing ever since
gmlogan said:
Tried that on fresh install, installs no errors and then driver showed processing for a few seconds (but no enhanced audio) and then driver not processing ever since
Click to expand...
Click to collapse
I've tried everything to get viper to work, I don't understand - previously all I've had to do is install the apk, install drivers - reboot & jobs done!
Now it's like you need a masters degree.
I've followed so many guides, viper apk is installed, rooted, busybox & I've renamed the file in system / etc - but upon opening viper & attempting 2 install drivers, I'm told installation has failed.. something something busybox, something something check if rooted :what::banghead:
My hope now is a Dev will build a beta 9 build & incorporate viper
dindoliya said:
I must have done something wrong. I dirty flashed the ROM and installed A.R.I.S.E. again. Now everything seems to be working. I did not have to modify any files or flash any additional files
Click to expand...
Click to collapse
Sorry to hear that, remove it, reboot and flash zip again
Check SuperSu if still there delete it
rename file
Here are the steps to install viper with a Pixel 4 XL:
1. In magisk go to downloads, install the audio compatibility patch 1.7 3. Choose volume up for requested settings, although USB can be set as preferred.
2. Reboot
3. Install XDA Labs Viper. Do not open.
4. In magisk go to downloads, install the Audio Modification Library v2 4. Do not reboot.
5. Open Viper, let it install driver and it will reboot.
6. Go to app info for viper, disable battery optimization.
That’s it. Enjoy the audio bliss.
Can you link me to the viper that you installed?
---------- Post added at 01:35 AM ---------- Previous post was at 01:35 AM ----------
I tried all your steps but apparently I downloaded the wrong viper because I keep getting the "need to install driver" message, and it doesn't work
mrcrptguy said:
Can you link me to the viper that you installed?
---------- Post added at 01:35 AM ---------- Previous post was at 01:35 AM ----------
I tried all your steps but apparently I downloaded the wrong viper because I keep getting the "need to install driver" message, and it doesn't work
Click to expand...
Click to collapse
You might have the same issue I did. I uninstalled everything. Then, I installed the latest viper. I got the "need to install driver" message about 5 times. Then it stuck. After that I installed the other two modules.
Can you confirm the audio mods are actually working? I've installed viper many times on different devices and in some cases everything seemed to have went fine but the audio mods were not actually working.
mrcrptguy said:
Can you confirm the audio mods are actually working? I've installed viper many times on different devices and in some cases everything seemed to have went fine but the audio mods were not actually working.
Click to expand...
Click to collapse
Yes, the ones I've tested (speaker) work. Haven't had a chance to test others.
What viper did you use?
mrcrptguy said:
What viper did you use?
Click to expand...
Click to collapse
https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
2.7.1
madscribblerz said:
Here are the steps to install viper with a Pixel 4 XL:
1. In magisk go to downloads, install the audio compatibility patch 1.7 3. Choose volume up for requested settings, although USB can be set as preferred.
2. Reboot
3. Install XDA Labs Viper. Do not open.
4. In magisk go to downloads, install the Audio Modification Library v2 4. Do not reboot.
5. Open Viper, let it install driver and it will reboot.
6. Go to app info for viper, disable battery optimization.
That’s it. Enjoy the audio bliss.
Click to expand...
Click to collapse
Hey bro how do you basically romthe system been out the game for a while and why do we unlock the phone don't we lose good updates from doing it?
madscribblerz said:
Here are the steps to install viper with a Pixel 4 XL:
1. In magisk go to downloads, install the audio compatibility patch 1.7 3. Choose volume up for requested settings, although USB can be set as preferred.
2. Reboot
3. Install XDA Labs Viper. Do not open.
4. In magisk go to downloads, install the Audio Modification Library v2 4. Do not reboot.
5. Open Viper, let it install driver and it will reboot.
6. Go to app info for viper, disable battery optimization.
That’s it. Enjoy the audio bliss.
Click to expand...
Click to collapse
Doesn't work for me
QD1A.190821.014.C2
ibphantom said:
Doesn't work for me
QD1A.190821.014.C2
Click to expand...
Click to collapse
Maybe try this method :good:
https://forum.xda-developers.com/pi...iper4android-compatible-t3929914/post80185220
Badger50 said:
Maybe try this method :good:
https://forum.xda-developers.com/pi...iper4android-compatible-t3929914/post80185220
Click to expand...
Click to collapse
NICE. All I had to do was install Viper but not the driver, then Audio Mod Library, and after magisk reboot, install the driver in viper and reboot again.
Thank you.
ibphantom said:
NICE. All I had to do was install Viper but not the driver, then Audio Mod Library, and after magisk reboot, install the driver in viper and reboot again.
Thank you.
Click to expand...
Click to collapse
No worries. Thank the XDA member that came up with it :good:
Badger50 said:
Maybe try this method :good:
https://forum.xda-developers.com/pi...iper4android-compatible-t3929914/post80185220
Click to expand...
Click to collapse
Worked like a charm. Much appreciated!
I did everything as in 1st post... I get this .... What am I doing wrong
sam1374 said:
I did everything as in 1st post... I get this .... What am I doing wrong
Click to expand...
Click to collapse
You have to enable the master limiter. That's pretty much your on/off switch.
Does anyone know if the Viper equalizer works while playing music on Android auto?
I doubt I'll get a response, but I converted from the S8+ to the Pixel 4 XL. I still have ALL the zip files for arise and viper, can they be used at all now I have viper working or are they pretty much useless?
Madjax2020 said:
I doubt I'll get a response, but I converted from the S8+ to the Pixel 4 XL. I still have ALL the zip files for arise and viper, can they be used at all now I have viper working or are they pretty much useless?
Click to expand...
Click to collapse
Viper works great. Aries doesn't and isn't compatible. I use viper and ainur.
quinejh said:
Viper works great. Aries doesn't and isn't compatible. I use viper and ainur.
Click to expand...
Click to collapse
Ainur is?
Madjax2020 said:
Ainur is?
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/software/soundmod-ainur-audio-t3450516. :good: